Date   

Re: can nvda read shared screen in Zoom?

soloman s
 

Hi,
I would be grateful for tips on this as well.
Meanwhile, you can capture images with the assistance of someone
which, can later be scanned using Envision for instance.
But when you do screenshare, you are in full control of your content.
Please remember to protect the ears of your sighted students by using
headset.

On 8/12/20, Aschalew Byness <gakidan.ashagre235@...> wrote:
Hi All?
I want to read the slydes shared by a host in a Zoom meeting. Can NVDA
read the shared screen by the zoom host to me? if yes, How?



--
With warm regards
Solomon S
teachsolo@...


can nvda read shared screen in Zoom?

Aschalew Byness
 

Hi All?
I want to read the slydes shared by a host in a Zoom meeting. Can NVDA
read the shared screen by the zoom host to me? if yes, How?


Re: problem with search edit box in folders

 

Hi,
I think I know why this is happening. But just to verify, from File Explorer, press Control+E to focus to search field. Wait about ten seconds then press Control+NVDA+F1. If it says "searchui" or "searchapp", then yes, this is Windows Search interface, not File Explorer. I look forward to a day when I can sleep better at nights knowing that folks don't have to install Windows 10 App Essentials add-on to use many features.
Cheers,
Joseph

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of JM Casey
Sent: Tuesday, August 11, 2020 3:34 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] problem with search edit box in folders

Very strange.
I can't really comment on the window not refreshing (I'm guessing visually the info is there but NVDA doesn't "see it" til you return to the window) But to me there doesn't seem a huge difference between pressing enter and down arrow.
Unfortunately I can't totally recall how things seemed to work before, but I seem to recall search populating as I was typing into the box.
So for example in my "films" folder I could start typing "holocaust" into the search box and after a few letters "cannibal holocaust" would be there, etc.



-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of seb naudet
Sent: August 11, 2020 4:35 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] problem with search edit box in folders

yes i have to refresh the window with alt tab.

if i don't, folder list is not filtered, and sometimes i'm stuck in anempty window.

in previous windows version i only had to down arrow to display search results.

like in start menu.



Le 11/08/2020 à 21:57, JM Casey a écrit :

I've had to press enter for a while now. Not sure when it started but maybe an update or so ago for me (and I'm still on 1909). But alt-tab? That is strange. You mean there is a separate window coming up? Or are results not showing up until you return to your initial file explorer window..maybe not being recognised by nVDA?



-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of seb
naudet
Sent: August 11, 2020 6:27 AM
To: nvda@nvda.groups.io
Subject: [nvda] problem with search edit box in folders

Hello list,

i've recently updated my windows 10 pro (64-bit) Version 2004
(10.0.19041)

and last NVDA available.

when i search for a file in a folder i now have to press enter after typing the name, and alt tab to see the result of my search.

quite complicate compared with previous version of windows.

any idea to simplify access to search results?


thank you










.


Re: problem with search edit box in folders

JM Casey
 

Very strange.
I can't really comment on the window not refreshing (I'm guessing visually the info is there but NVDA doesn't "see it" til you return to the window)
But to me there doesn't seem a huge difference between pressing enter and down arrow.
Unfortunately I can't totally recall how things seemed to work before, but I seem to recall search populating as I was typing into the box.
So for example in my "films" folder I could start typing "holocaust" into the search box and after a few letters "cannibal holocaust" would be there, etc.

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of seb naudet
Sent: August 11, 2020 4:35 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] problem with search edit box in folders

yes i have to refresh the window with alt tab.

if i don't, folder list is not filtered, and sometimes i'm stuck in anempty window.

in previous windows version i only had to down arrow to display search results.

like in start menu.



Le 11/08/2020 à 21:57, JM Casey a écrit :

I've had to press enter for a while now. Not sure when it started but maybe an update or so ago for me (and I'm still on 1909). But alt-tab? That is strange. You mean there is a separate window coming up? Or are results not showing up until you return to your initial file explorer window..maybe not being recognised by nVDA?



-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of seb
naudet
Sent: August 11, 2020 6:27 AM
To: nvda@nvda.groups.io
Subject: [nvda] problem with search edit box in folders

Hello list,

i've recently updated my windows 10 pro (64-bit) Version 2004
(10.0.19041)

and last NVDA available.

when i search for a file in a folder i now have to press enter after typing the name, and alt tab to see the result of my search.

quite complicate compared with previous version of windows.

any idea to simplify access to search results?


thank you










.


Re: problem with search edit box in folders

Chris Mullins
 

Hi

Using the folder search box has not been something I have used very much because I can usually find the file I want by quickly typing the first 1, 2 or 3 letters of the file name whilst focused in the list view, and arrowing to the required file if it’s not the one moved to immediately.  When I saw this post, I had a dig around, first in the File, Options menu item available when in File Explorer.  Move to the View tab then arrow through the Advanced Settings treeview and there are a couple of settings related to searching.  Find the   entry entitled “When typing into Listview...”  and expand it.  There are 2 mutually exclusive options “Automatically type into the Search box”  and “ Select the typed item in the view”.  

 

I set mine to “Select item in the View” to On which means the other option is off.  This allows me to access files as described above but I can also backtab from the listview into the search box type in my search criteria and then use down arrow to access the results.  I hadn’t much success with this in the past but I also checked out the Search category in the main Windows Settings dialog (Windows+I). In the “Searching Windows” sub-category, yu can set what you want to search (I chose Classic), index your folders and also troubleshoot indexing.  After I used the Advanced Search Indexing performance” link, searching using the Search Box in File Explorer became much easier.

 

Cheers

Chris        

 

 

From: JM Casey
Sent: 11 August 2020 20:57
To: nvda@nvda.groups.io
Subject: Re: [nvda] problem with search edit box in folders

 

I've had to press enter for a while now. Not sure when it started but maybe an update or so ago for me (and I'm still on 1909). But alt-tab? That is strange. You mean there is a separate window coming up? Or are results not showing up until you return to your initial file explorer window..maybe not being recognised by nVDA?

 

 

 

-----Original Message-----

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of seb naudet

Sent: August 11, 2020 6:27 AM

To: nvda@nvda.groups.io

Subject: [nvda] problem with search edit box in folders

 

      Hello list,

 

i've recently updated my windows 10 pro (64-bit) Version 2004 (10.0.19041)

 

and last NVDA available.

 

when i search for a file in a folder i now have to press enter after typing the name, and alt tab to see the result of my search.

 

quite complicate compared with previous version of windows.

 

any idea to simplify access to search results?

 

 

     thank you

 

 

 

 

 

 

 

 

 

 


Re: Thunderbird quick key folder nav extension

Dan Beaver
 

Just after a TB update I often can't get NVDA to read the list of folders.   However, if I shut down TB and bring it back up then NVDA reads them just fine so I think it is just a quirky thing with the updates.


The extension thing is separate from the update issue.


Dan Beaver

On 8/11/2020 5:16 PM, David Goldfield wrote:

I have noticed that the treeview of email folders isn't always accessible right after a Thunderbird update. I'm not certain if that is related to the problem but just wondering if closing and then restarting Thunderbird restores normal functionality.

David Goldfield,
Assistive Technology Specialist

JAWS Certified, 2019

www.davidgoldfield.org
On 8/11/2020 3:05 PM, Dan Beaver wrote:

I have seen something like this but when I hit the letter I and it seems nothing happens if I wait several seconds it does finally go to the next folder starting with an I.


How long did you wait?


Dan Beaver

On 8/11/2020 2:43 PM, Don H wrote:
Running Win 10 version 2004, NVDA 2020.2 and Thunderbird 68.11.0 32 bit.

The Quick key folder navigation extension is not working consistently.  For example sometimes when i hit the letter i key it will take me to the in box folders and other times it does nothing.  Tried uninstalling and reinstalling the extension and it did not fix the issue.  Anyone else seeing this problem?  I know that the quick key folder navigation extension does not work with Thunderbird version 78 but thought it still worked with veersion 68.






-- 
Dan Beaver (KA4DAN)
-- 
Dan Beaver (KA4DAN)


Re: Thunderbird quick key folder nav extension

David Goldfield
 

I have noticed that the treeview of email folders isn't always accessible right after a Thunderbird update. I'm not certain if that is related to the problem but just wondering if closing and then restarting Thunderbird restores normal functionality.

David Goldfield,
Assistive Technology Specialist

JAWS Certified, 2019

www.davidgoldfield.org
On 8/11/2020 3:05 PM, Dan Beaver wrote:

I have seen something like this but when I hit the letter I and it seems nothing happens if I wait several seconds it does finally go to the next folder starting with an I.


How long did you wait?


Dan Beaver

On 8/11/2020 2:43 PM, Don H wrote:
Running Win 10 version 2004, NVDA 2020.2 and Thunderbird 68.11.0 32 bit.

The Quick key folder navigation extension is not working consistently.  For example sometimes when i hit the letter i key it will take me to the in box folders and other times it does nothing.  Tried uninstalling and reinstalling the extension and it did not fix the issue.  Anyone else seeing this problem?  I know that the quick key folder navigation extension does not work with Thunderbird version 78 but thought it still worked with veersion 68.






-- 
Dan Beaver (KA4DAN)


Re: Protonmail

Jesse Farquharson
 

Hello Marco,

Sadly I haven't been able to access the code that is needed to run the bridge successfully. You may need sighted assistance if you can get it. Alternatively, I would try e-mailing ProtonMail support. Explain what a screenreader is and why you use it if you can, and maybe they can help you somehow.

Good luck.


Re: problem with search edit box in folders

seb naudet
 

yes i have to refresh the window with alt tab.

if i don't, folder list is not filtered, and sometimes i'm stuck in anempty window.

in previous windows version i only had to down arrow to display search results.

like in start menu.

Le 11/08/2020 à 21:57, JM Casey a écrit :

I've had to press enter for a while now. Not sure when it started but maybe an update or so ago for me (and I'm still on 1909). But alt-tab? That is strange. You mean there is a separate window coming up? Or are results not showing up until you return to your initial file explorer window..maybe not being recognised by nVDA?



-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of seb naudet
Sent: August 11, 2020 6:27 AM
To: nvda@nvda.groups.io
Subject: [nvda] problem with search edit box in folders

Hello list,

i've recently updated my windows 10 pro (64-bit) Version 2004 (10.0.19041)

and last NVDA available.

when i search for a file in a folder i now have to press enter after typing the name, and alt tab to see the result of my search.

quite complicate compared with previous version of windows.

any idea to simplify access to search results?


thank you









.


Protonmail

Marco Oros
 

Hello.

Have You use Protonmail with NVDA and Thunderbird?

Please, how to use NVDA with bridge client? I would like to use my protonmail address with Thunderbird.

Have You somebody some experiences with that?

Thank You.

Marco


Re: problem with search edit box in folders

JM Casey
 

I've had to press enter for a while now. Not sure when it started but maybe an update or so ago for me (and I'm still on 1909). But alt-tab? That is strange. You mean there is a separate window coming up? Or are results not showing up until you return to your initial file explorer window..maybe not being recognised by nVDA?

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of seb naudet
Sent: August 11, 2020 6:27 AM
To: nvda@nvda.groups.io
Subject: [nvda] problem with search edit box in folders

Hello list,

i've recently updated my windows 10 pro (64-bit) Version 2004 (10.0.19041)

and last NVDA available.

when i search for a file in a folder i now have to press enter after typing the name, and alt tab to see the result of my search.

quite complicate compared with previous version of windows.

any idea to simplify access to search results?


thank you


Re: More help: Selecting text with the caret without losing selection

Jonathan Milam
 

That's correct, and I think that is where the disconnect is with this
particular application.

Jonathan

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gene
Sent: Tuesday, August 11, 2020 3:02 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] More help: Selecting text with the caret without losing
selection

I see that in general, that's what the command does. I've almost never used
it and I didn't recall it. But in doing what you are doing, it doesn't work
properly. If I am in forms mode and use carret browsing to select text on a
web page the NVDA shift up arrow command doesn't read the text. It has
something to do with how text is presented to the screen-reader. If I
select text with browse mode off, then copy it to the clipboard and use the
read clipboard command, the text is read. Going into browse mode again
after selecting text with caret browsing doesn't cause the command to work
to tell you what you selected. You selected text directly on the web page.
When you go back into browse mode, no text is selected in the browse mode
buffer, which is where you select text in browse mode.
In other words, browse mode doesn't know anything about text you have
selected on the page. it only knows about text you select while in browse
mode from the browse mode buffer.
Gene
-----Original Message-----
From: Jonathan Milam
Sent: Tuesday, August 11, 2020 1:41 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] More help: Selecting text with the caret without losing
selection

Thanks, Gene. Sorry if I wasn't clear. I was actually using
NVDA+Shift+UpArrow to read text that was selected at the caret.

The problem with this web application is that it has a frame that NVDA is
supposed to see to allow navigation in Focus mode. I think the company is
saying that the Caret browsing method allows this navigation, but in fact it
doesn't. It goes back to what you are saying in that Screen-readers are
completely unaware of the virtual caret. I would need to know what I am
selecting so that I can activate the annotate button. This is similar to
making comments on certain strings of text in Google Docs. This is
unfortunately a lost cause unless the vendor actually makes their document
frame a focusable environment.

Jonathan

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gene
Sent: Tuesday, August 11, 2020 11:24 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] More help: Selecting text with the caret without losing
selection

I'm not at all sure you can do what you want, at least not without a lot of
time consuming, frustrating work. First, the command you are using to
select text, NVDA shift up arrow doesn't select text. It may read the
current line but it doesn't move you through anything. Except for control
ak, which selects all text, you must always move through what you are
selecting.

As for doing what you want to do, if you turn on caret browsing while in
browse mode, you can turn it on later but its probably most convenient then,
and then move in browse mode to what you want to select, then turn browse
mode off and move with the left and right arrows, you evidently can select
what you want. If you want to start selecting at the beginning of the line,
moving with home may put you there and you can then use shift right arrow to
move and select. But you will hear nothing. Screen-readers are completely
unaware of the virtual caret the browser places on the screen. The only way
I know to determine what you have selected is to move without any feedback
to where you think you want to be from where you are on a line, then use
control c to copy what you have selected to the clipboard, then use the NVDA
read clipboard command, NVDA key c.

Aside from then finding the button, this method of selecting with no
feedback may be so difficult that you will find it not worth it. You can
change what you have selected. If, for example, you select a word too far,
you can use shift left arrow and move by letter until you have unselected
the word. The rest of what you selected will still be. So you can copy to
the clipboard, hold shift and either move farther right or farther left. If
you move in the opposite direction of what you have selected, what you move
through will be unselected and the rest will still be selected.

Gene
-----Original Message-----
From: Jonathan Milam
Sent: Tuesday, August 11, 2020 9:35 AM
To: nvda@nvda.groups.io
Subject: [nvda] More help: Selecting text with the caret without losing
selection

Hi All,

To revisit this issue, what I am needing to do is to use the System Caret
and be able to select text using the caret itself. With this application,
whenever I select text with caret browsing on in Firefox, I am supposed to
be able to find and select a button called "annotate" that appears when text
is selected. However, when I select text, and use the caret desktop
shortcut key NVDA+Shift+UpArrow, NVDA tells me that the text is selected,
however, if I move away from the selection to search for the button that
should appear, the selection is lost in browse mode. I am not getting any
feedback when in Focus mode. How can I select text with the caret and then
search for the annotate button without losing my selection while in browse
mode? Is that possible?

Originally, I thought object navigation would work here, but Object
navigation isn't actually using the caret when selecting text.

Thanks,
Jonathan
-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gene
Sent: Tuesday, August 4, 2020 10:18 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Selecting text

I don't know if this works in all browsers that support browse mode. it
does work in some.
I am using movement commands for the desktop keyboard layout.

Be in object review.
Use numpad 4 and 6 by themselves. 4 will move back and 6 will move forward.
You are moving by word. To move by line, use 7 and 9. To move by letter,
use 1 and 3.
When you get to the beginning of what you want to select, issue the command
NVDA f9. Move to the end of what you want to select and issue the command
NVDA f10 quickly. You should hear something indicating that text was
selected. To copy text to the clipboard, issue the command twice quickly,
not once.

Gene
-----Original Message-----
From: Jonathan Milam
Sent: Tuesday, August 04, 2020 8:48 AM
To: nvda@nvda.groups.io
Subject: [nvda] Selecting text



Hi All,



I am testing a web application called “Hypothesis” and need to be able to
select text while in browse mode, separate from the caret. Is there a way
of selecting text with NVDA in one of its object modes so that I can have
the main browser cursor elsewhere?



Thanks,

Jonathan


Re: Thunderbird quick key folder nav extension

Dan Beaver
 

I have seen something like this but when I hit the letter I and it seems nothing happens if I wait several seconds it does finally go to the next folder starting with an I.


How long did you wait?


Dan Beaver

On 8/11/2020 2:43 PM, Don H wrote:
Running Win 10 version 2004, NVDA 2020.2 and Thunderbird 68.11.0 32 bit.

The Quick key folder navigation extension is not working consistently.  For example sometimes when i hit the letter i key it will take me to the in box folders and other times it does nothing.  Tried uninstalling and reinstalling the extension and it did not fix the issue.  Anyone else seeing this problem?  I know that the quick key folder navigation extension does not work with Thunderbird version 78 but thought it still worked with veersion 68.






-- 
Dan Beaver (KA4DAN)


Re: More help: Selecting text with the caret without losing selection

Gene
 

I see that in general, that's what the command does. I've almost never used it and I didn't recall it. But in doing what you are doing, it doesn't work properly. If I am in forms mode and use carret browsing to select text on a web page the NVDA shift up arrow command doesn't read the text. It has something to do with how text is presented to the screen-reader. If I select text with browse mode off, then copy it to the clipboard and use the read clipboard command, the text is read. Going into browse mode again after selecting text with caret browsing doesn't cause the command to work to tell you what you selected. You selected text directly on the web page. When you go back into browse mode, no text is selected in the browse mode buffer, which is where you select text in browse mode.
In other words, browse mode doesn't know anything about text you have selected on the page. it only knows about text you select while in browse mode from the browse mode buffer.
Gene

-----Original Message-----
From: Jonathan Milam
Sent: Tuesday, August 11, 2020 1:41 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] More help: Selecting text with the caret without losing selection

Thanks, Gene. Sorry if I wasn't clear. I was actually using
NVDA+Shift+UpArrow to read text that was selected at the caret.

The problem with this web application is that it has a frame that NVDA is
supposed to see to allow navigation in Focus mode. I think the company is
saying that the Caret browsing method allows this navigation, but in fact it
doesn't. It goes back to what you are saying in that Screen-readers are
completely unaware of the virtual caret. I would need to know what I am
selecting so that I can activate the annotate button. This is similar to
making comments on certain strings of text in Google Docs. This is
unfortunately a lost cause unless the vendor actually makes their document
frame a focusable environment.

Jonathan

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gene
Sent: Tuesday, August 11, 2020 11:24 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] More help: Selecting text with the caret without losing
selection

I'm not at all sure you can do what you want, at least not without a lot of
time consuming, frustrating work. First, the command you are using to
select text, NVDA shift up arrow doesn't select text. It may read the
current line but it doesn't move you through anything. Except for control
ak, which selects all text, you must always move through what you are
selecting.

As for doing what you want to do, if you turn on caret browsing while in
browse mode, you can turn it on later but its probably most convenient then,
and then move in browse mode to what you want to select, then turn browse
mode off and move with the left and right arrows, you evidently can select
what you want. If you want to start selecting at the beginning of the line,
moving with home may put you there and you can then use shift right arrow to
move and select. But you will hear nothing. Screen-readers are completely
unaware of the virtual caret the browser places on the screen. The only way
I know to determine what you have selected is to move without any feedback
to where you think you want to be from where you are on a line, then use
control c to copy what you have selected to the clipboard, then use the NVDA
read clipboard command, NVDA key c.

Aside from then finding the button, this method of selecting with no
feedback may be so difficult that you will find it not worth it. You can
change what you have selected. If, for example, you select a word too far,
you can use shift left arrow and move by letter until you have unselected
the word. The rest of what you selected will still be. So you can copy to
the clipboard, hold shift and either move farther right or farther left. If
you move in the opposite direction of what you have selected, what you move
through will be unselected and the rest will still be selected.

Gene
-----Original Message-----
From: Jonathan Milam
Sent: Tuesday, August 11, 2020 9:35 AM
To: nvda@nvda.groups.io
Subject: [nvda] More help: Selecting text with the caret without losing
selection

Hi All,

To revisit this issue, what I am needing to do is to use the System Caret
and be able to select text using the caret itself. With this application,
whenever I select text with caret browsing on in Firefox, I am supposed to
be able to find and select a button called "annotate" that appears when text
is selected. However, when I select text, and use the caret desktop
shortcut key NVDA+Shift+UpArrow, NVDA tells me that the text is selected,
however, if I move away from the selection to search for the button that
should appear, the selection is lost in browse mode. I am not getting any
feedback when in Focus mode. How can I select text with the caret and then
search for the annotate button without losing my selection while in browse
mode? Is that possible?

Originally, I thought object navigation would work here, but Object
navigation isn't actually using the caret when selecting text.

Thanks,
Jonathan
-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gene
Sent: Tuesday, August 4, 2020 10:18 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Selecting text

I don't know if this works in all browsers that support browse mode. it
does work in some.
I am using movement commands for the desktop keyboard layout.

Be in object review.
Use numpad 4 and 6 by themselves. 4 will move back and 6 will move forward.
You are moving by word. To move by line, use 7 and 9. To move by letter,
use 1 and 3.
When you get to the beginning of what you want to select, issue the command
NVDA f9. Move to the end of what you want to select and issue the command
NVDA f10 quickly. You should hear something indicating that text was
selected. To copy text to the clipboard, issue the command twice quickly,
not once.

Gene
-----Original Message-----
From: Jonathan Milam
Sent: Tuesday, August 04, 2020 8:48 AM
To: nvda@nvda.groups.io
Subject: [nvda] Selecting text



Hi All,



I am testing a web application called “Hypothesis” and need to be able to
select text while in browse mode, separate from the caret. Is there a way
of selecting text with NVDA in one of its object modes so that I can have
the main browser cursor elsewhere?



Thanks,

Jonathan


Re: Thunderbird quick key folder nav extension

brice Mijares
 

Today was the first time I had a problem with this extension. I think I'm running TB 68.1.  Got it working. Went to tools, to ad ons, to extensions, made sure single letter navigation was enabled, got out of there and it started working again.

On 8/11/2020 11:43 AM, Don H wrote:
Running Win 10 version 2004, NVDA 2020.2 and Thunderbird 68.11.0 32 bit.

The Quick key folder navigation extension is not working consistently.  For example sometimes when i hit the letter i key it will take me to the in box folders and other times it does nothing.  Tried uninstalling and reinstalling the extension and it did not fix the issue.  Anyone else seeing this problem?  I know that the quick key folder navigation extension does not work with Thunderbird version 78 but thought it still worked with veersion 68.





Thunderbird quick key folder nav extension

Don H
 

Running Win 10 version 2004, NVDA 2020.2 and Thunderbird 68.11.0 32 bit.

The Quick key folder navigation extension is not working consistently.  For example sometimes when i hit the letter i key it will take me to the in box folders and other times it does nothing.  Tried uninstalling and reinstalling the extension and it did not fix the issue.  Anyone else seeing this problem?  I know that the quick key folder navigation extension does not work with Thunderbird version 78 but thought it still worked with veersion 68.


Re: More help: Selecting text with the caret without losing selection

Jonathan Milam
 

Thanks, Gene. Sorry if I wasn't clear. I was actually using
NVDA+Shift+UpArrow to read text that was selected at the caret.

The problem with this web application is that it has a frame that NVDA is
supposed to see to allow navigation in Focus mode. I think the company is
saying that the Caret browsing method allows this navigation, but in fact it
doesn't. It goes back to what you are saying in that Screen-readers are
completely unaware of the virtual caret. I would need to know what I am
selecting so that I can activate the annotate button. This is similar to
making comments on certain strings of text in Google Docs. This is
unfortunately a lost cause unless the vendor actually makes their document
frame a focusable environment.

Jonathan

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gene
Sent: Tuesday, August 11, 2020 11:24 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] More help: Selecting text with the caret without losing
selection

I'm not at all sure you can do what you want, at least not without a lot of
time consuming, frustrating work. First, the command you are using to
select text, NVDA shift up arrow doesn't select text. It may read the
current line but it doesn't move you through anything. Except for control
ak, which selects all text, you must always move through what you are
selecting.

As for doing what you want to do, if you turn on caret browsing while in
browse mode, you can turn it on later but its probably most convenient then,
and then move in browse mode to what you want to select, then turn browse
mode off and move with the left and right arrows, you evidently can select
what you want. If you want to start selecting at the beginning of the line,
moving with home may put you there and you can then use shift right arrow to
move and select. But you will hear nothing. Screen-readers are completely
unaware of the virtual caret the browser places on the screen. The only way
I know to determine what you have selected is to move without any feedback
to where you think you want to be from where you are on a line, then use
control c to copy what you have selected to the clipboard, then use the NVDA
read clipboard command, NVDA key c.

Aside from then finding the button, this method of selecting with no
feedback may be so difficult that you will find it not worth it. You can
change what you have selected. If, for example, you select a word too far,
you can use shift left arrow and move by letter until you have unselected
the word. The rest of what you selected will still be. So you can copy to
the clipboard, hold shift and either move farther right or farther left. If
you move in the opposite direction of what you have selected, what you move
through will be unselected and the rest will still be selected.

Gene
-----Original Message-----
From: Jonathan Milam
Sent: Tuesday, August 11, 2020 9:35 AM
To: nvda@nvda.groups.io
Subject: [nvda] More help: Selecting text with the caret without losing
selection

Hi All,

To revisit this issue, what I am needing to do is to use the System Caret
and be able to select text using the caret itself. With this application,
whenever I select text with caret browsing on in Firefox, I am supposed to
be able to find and select a button called "annotate" that appears when text
is selected. However, when I select text, and use the caret desktop
shortcut key NVDA+Shift+UpArrow, NVDA tells me that the text is selected,
however, if I move away from the selection to search for the button that
should appear, the selection is lost in browse mode. I am not getting any
feedback when in Focus mode. How can I select text with the caret and then
search for the annotate button without losing my selection while in browse
mode? Is that possible?

Originally, I thought object navigation would work here, but Object
navigation isn't actually using the caret when selecting text.

Thanks,
Jonathan
-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gene
Sent: Tuesday, August 4, 2020 10:18 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Selecting text

I don't know if this works in all browsers that support browse mode. it
does work in some.
I am using movement commands for the desktop keyboard layout.

Be in object review.
Use numpad 4 and 6 by themselves. 4 will move back and 6 will move forward.
You are moving by word. To move by line, use 7 and 9. To move by letter,
use 1 and 3.
When you get to the beginning of what you want to select, issue the command
NVDA f9. Move to the end of what you want to select and issue the command
NVDA f10 quickly. You should hear something indicating that text was
selected. To copy text to the clipboard, issue the command twice quickly,
not once.

Gene
-----Original Message-----
From: Jonathan Milam
Sent: Tuesday, August 04, 2020 8:48 AM
To: nvda@nvda.groups.io
Subject: [nvda] Selecting text



Hi All,



I am testing a web application called “Hypothesis” and need to be able to
select text while in browse mode, separate from the caret. Is there a way
of selecting text with NVDA in one of its object modes so that I can have
the main browser cursor elsewhere?



Thanks,

Jonathan


Re: Disable report of alerts from Zoom

benmoxey@...
 

Hi Rob

Settings cannot be accessed from within a meeting window. End the meeting
and ensure the main Zoom window has focus.

* Press Control + F to set focus to the Search edit box. This provides a
consistent starting point for navigation.
* Tab twice to Settings.

Note that you can only adjust settings when signed in to your Zoom account
when using the Windows desktop client.

Cheers

Ben

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Rob Hudson
Sent: Tuesday, 11 August 2020 10:07 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Disable report of alerts from Zoom

How do you get to the accessibility settings.
I joined a test meeting with the zoom meetings client, and I found no
setting sbutton anywhere that talked about it. I found audio settings and
such, but nothing about accessibility.

----- Original Message -----
From: "CARLOS-ESTEBAN" <carlosestebanpianista@...>
To: nvda@nvda.groups.io
Date: Mon, 10 Aug 2020 20:22:39 -0500
Subject: Re: [nvda] Disable report of alerts from Zoom

Hello.

I updated Zoom and is possible enable o disable the alerts, is an
excellent change.

Thanks to all for the answers.

Regards.


El 10/8/2020 a las 19:34, benmoxey@... escribió:
Hi Gene

You can check manually using the menu. Place focus on the main Zoom
window and hit Control + F to navigate to the find edit box. Hit tab to
navigate to the menu.

Cheers

Ben

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gene
Sent: Tuesday, 11 August 2020 9:49 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Disable report of alerts from Zoom

I haven't been offered the update yet.

Gene
----- Original Message -----
-----Original Message-----
From: benmoxey@...
Sent: Monday, August 10, 2020 6:36 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Disable report of alerts from Zoom



Hi everyone



Coming in late on this discussion, so hope I’m on the right track!



Ensure you update to the latest build of Zoom and you will notice
that they have added the ability to turn on and off alerts for
screen readers in Settings/Accessibility. I only spotted this
yesterday when installing it for a client.



Hope this helps.



Cheers



Ben





From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Brian
Vogel
Sent: Tuesday, 11 August 2020 8:50 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Disable report of alerts from Zoom





I don't know who's organizing the meetings in question, but if you
have the ability to contact them in advance, there are settings they
can tweak to make the join/leave notifications be triggered only for
the meeting Host and Co-Hosts.

See this Zoom Support Page:
https://support.zoom.us/hc/en-us/articles/115005756143-Changing-your
-meeting-settings and search on, "Sound notification when someone
join or leave."

Although this may not have a connection to text notification of
same, I'm willing to bet that it might. It's worth checking out, at the
very least.

Zoom is going to have a lot of refining to do, and for reasons of
accessibility plus a lot of others. I doubt that they ever, in
their wildest dreams, foresaw the app taking off as quickly and
gaining as many users as it has in a very short period of time.
While there are limited human resources for tweaking Zoom, they
certainly can't make changes for any problems unless those problems
are reported to them and the changes that would help are spelled out.

--

Carlos Esteban Martínez Macías.

Músico (pianista) y también ayuda a usuarios ciegos con el uso de
lectores de pantalla y tecnología.

Experto certificado en el lector de pantalla NVDA.


Musicien (pianist) and also help to the blind people in the use of
screen readers and technology. Certified expert in the screen reader NVDA.

Experto certificado en NVDA <https://certification.nvaccess.org>






Re: Disable report of alerts from Zoom

Angelo Sonnesso
 

Zoom client for meetings is the Windows program you need.


73 N2DYN Angelo

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Rob
Hudson
Sent: Tuesday, August 11, 2020 11:05 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Disable report of alerts from Zoom

There is no such client as
Windows Desktop Client
listed in the download center at:
https://zoom.us/download
Here's what I see:
Zoom Client for Meetings
Zoom Plugin for Microsoft Outlook
Zoom Plugin for IBM Notes
Zoom Extension for Browsers
Zoom Plugin for Intel Unite
Zoom Mobile Apps
Zoom Client Plugin for Sharing iPhone/iPad
Zoom Rooms for Conference Rooms and Touchscreen Displays
Controllers for Zoom Rooms
Zoom Plugin for Skype for Business
Perhaps the article should be updated to provide more relevant information.

----- Original Message -----
From: "Angelo Sonnesso" <@asonnesso>
To: <nvda@nvda.groups.io>
Date: Tue, 11 Aug 2020 10:30:35 -0400
Subject: Re: [nvda] Disable report of alerts from Zoom

Hot Keys and Keyboard Shortcuts for Zoom
Overview
There are keyboard shortcuts that you can use on the Zoom Desktop Client
for
Windows and Mac that allow you to navigate the Zoom settings without using
your mouse. They are listed in this article and also available in your
Zoom
desktop client settings, under Accessibility.

Prerequisites
Windows Desktop Client Version 3.5.19869.0701 or higher
Mac Desktop Client Version 3.5.19877.0701 or higher
Linux Desktop Client Version 1.1.32904.1120 or higher
iPad with iOS App Version 4.4.5 (55341.0715) or higher
Windows Icon Windows
You can view and edit keyboard shortcuts in your Accessibility settings.

Log in to your Zoom desktop client.
Click your profile picture then click Settings.
Settings Option Under Profile Picture
Click Keyboard Shortcuts.

The keyboard shortcuts will appear.
Editing Shortcuts
You can edit a shortcut by clicking on the shortcut and then pressing the
shortcut key that you would like to use.

Some of the shortcuts can be used as global shortcuts, meaning they will
work even when Zoom is not in focus. To enable a shortcut globally, check
the option next to the shortcut.

Available Keyboard Shortcuts
F6: Navigate among Zoom popup windows.
Ctrl+Alt+Shift: Move focus to Zoom's meeting controls
PageUp: View previous 25 video stream in gallery view
PageDown: View next 25 video stream in gallery view
Alt: Turn on/off the option Always show meeting control toolbar in
Accessibility Settings
Alt+F1: Switch to active speaker view in video meeting
Alt+F2: Switch to gallery video view in video meeting
Alt+F4: Close the current window
Alt+V: Start/Stop Video
Alt+A: Mute/unmute audio
Alt+M: Mute/unmute audio for everyone except host Note: For the meeting
host
only
Alt+S: Launch share screen window and stop screen share Note: Will only
work
when meeting control toolbar has focus
Alt+Shift+S: Start/stop new screen share Note: Will only work when meeting
control toolbar has focus
Alt+T: Pause or resume screen share Note: Will only work when meeting
control toolbar has focus
Alt+R: Start/stop local recording
Alt+C: Start/stop cloud recording
Alt+P: Pause or resume recording
Alt+N: Switch camera
Alt+F: Enter or exit full screen
Alt+H: Display/hide In-Meeting Chat panel
Alt+U:Display/hide Participants panel
Alt+I: Open Invite window
Alt+Y: Raise/lower hand
Alt+Shift+R: Gain Remote Control
Alt+Shift+G: Stop Remote Control
Ctrl+2: Read active speaker name
Ctrl+Alt+Shift+H: Show/Hide floating meeting controls
Alt+Shift+T: Screenshot
Switch to Portrait/Landscape View: Alt+L
Ctrl+W: Close current chat session
Ctrl+Up: Go to previous chat
Ctrl+Down: Go to next chat
Ctrl+T: Jump to chat with someone
Ctrl+F: Search
Ctrl+Tab: Move to the next tab (right)
Ctrl+Shift+Tab: Move to the previous tab (left)

Note: You can edit your keyboard shortcuts in Windows if you need or want
to. To do this, you’ll click on the shortcut and then press the shortcut
key
that you would like to use.

Log in to your Zoom desktop client.
Click your profile picture then click Settings.
Click Keyboard Shortcuts.
The keyboard shortcuts will appear.
Some of these hotkeys can be used as global shortcuts, meaning they will
work even when Zoom is not in focus. To enable a shortcut globally, check
the option next to the shortcut.


73 N2DYN Angelo

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Rob
Hudson
Sent: Tuesday, August 11, 2020 8:07 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Disable report of alerts from Zoom

How do you get to the accessibility settings.
I joined a test meeting with the zoom meetings client, and I found no
setting sbutton anywhere that talked about it. I found audio settings and
such, but nothing about accessibility.

----- Original Message -----
From: "CARLOS-ESTEBAN" <carlosestebanpianista@...>
To: nvda@nvda.groups.io
Date: Mon, 10 Aug 2020 20:22:39 -0500
Subject: Re: [nvda] Disable report of alerts from Zoom

Hello.

I updated Zoom and is possible enable o disable the alerts, is an
excellent change.

Thanks to all for the answers.

Regards.


El 10/8/2020 a las 19:34, benmoxey@... escribió:
Hi Gene

You can check manually using the menu. Place focus on the main Zoom
window and hit Control + F to navigate to the find edit box. Hit tab to
navigate to the menu.

Cheers

Ben

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gene
Sent: Tuesday, 11 August 2020 9:49 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Disable report of alerts from Zoom

I haven't been offered the update yet.

Gene
----- Original Message -----
-----Original Message-----
From: benmoxey@...
Sent: Monday, August 10, 2020 6:36 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Disable report of alerts from Zoom



Hi everyone



Coming in late on this discussion, so hope I’m on the right track!



Ensure you update to the latest build of Zoom and you will notice that
they
have added the ability to turn on and off alerts for screen readers in
Settings/Accessibility. I only spotted this yesterday when installing
it
for
a client.



Hope this helps.



Cheers



Ben





From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Brian
Vogel
Sent: Tuesday, 11 August 2020 8:50 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Disable report of alerts from Zoom





I don't know who's organizing the meetings in question, but if you
have
the
ability to contact them in advance, there are settings they can tweak
to
make the join/leave notifications be triggered only for the meeting
Host
and
Co-Hosts.

See this Zoom Support Page:
https://support.zoom.us/hc/en-us/articles/115005756143-Changing-your-meeting
-settings
and search on, "Sound notification when someone join or leave."

Although this may not have a connection to text notification of same,
I'm
willing to bet that it might. It's worth checking out, at the very
least.

Zoom is going to have a lot of refining to do, and for reasons of
accessibility plus a lot of others. I doubt that they ever, in their
wildest dreams, foresaw the app taking off as quickly and gaining as
many
users as it has in a very short period of time. While there are
limited
human resources for tweaking Zoom, they certainly can't make changes
for
any
problems unless those problems are reported to them and the changes
that
would help are spelled out.

--

Carlos Esteban Martínez Macías.

Músico (pianista) y también ayuda a usuarios ciegos con el uso de
lectores de pantalla y tecnología.

Experto certificado en el lector de pantalla NVDA.


Musicien (pianist) and also help to the blind people in the use of
screen readers and technology. Certified expert in the screen reader
NVDA.

Experto certificado en NVDA <https://certification.nvaccess.org>












Re: More help: Selecting text with the caret without losing selection

Gene
 

I'm not at all sure you can do what you want, at least not without a lot of time consuming, frustrating work. First, the command you are using to select text, NVDA shift up arrow doesn't select text. It may read the current line but it doesn't move you through anything. Except for control ak, which selects all text, you must always move through what you are selecting.

As for doing what you want to do, if you turn on caret browsing while in browse mode, you can turn it on later but its probably most convenient then, and then move in browse mode to what you want to select, then turn browse mode off and move with the left and right arrows, you evidently can select what you want. If you want to start selecting at the beginning of the line, moving with home may put you there and you can then use shift right arrow to move and select. But you will hear nothing. Screen-readers are completely unaware of the virtual caret the browser places on the screen. The only way I know to determine what you have selected is to move without any feedback to where you think you want to be from where you are on a line, then use control c to copy what you have selected to the clipboard, then use the NVDA read clipboard command, NVDA key c.

Aside from then finding the button, this method of selecting with no feedback may be so difficult that you will find it not worth it. You can change what you have selected. If, for example, you select a word too far, you can use shift left arrow and move by letter until you have unselected the word. The rest of what you selected will still be. So you can copy to the clipboard, hold shift and either move farther right or farther left. If you move in the opposite direction of what you have selected, what you move through will be unselected and the rest will still be selected.

Gene

-----Original Message-----
From: Jonathan Milam
Sent: Tuesday, August 11, 2020 9:35 AM
To: nvda@nvda.groups.io
Subject: [nvda] More help: Selecting text with the caret without losing selection

Hi All,

To revisit this issue, what I am needing to do is to use the System Caret
and be able to select text using the caret itself. With this application,
whenever I select text with caret browsing on in Firefox, I am supposed to
be able to find and select a button called "annotate" that appears when text
is selected. However, when I select text, and use the caret desktop
shortcut key NVDA+Shift+UpArrow, NVDA tells me that the text is selected,
however, if I move away from the selection to search for the button that
should appear, the selection is lost in browse mode. I am not getting any
feedback when in Focus mode. How can I select text with the caret and then
search for the annotate button without losing my selection while in browse
mode? Is that possible?

Originally, I thought object navigation would work here, but Object
navigation isn't actually using the caret when selecting text.

Thanks,
Jonathan
-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gene
Sent: Tuesday, August 4, 2020 10:18 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Selecting text

I don't know if this works in all browsers that support browse mode. it
does work in some.
I am using movement commands for the desktop keyboard layout.

Be in object review.
Use numpad 4 and 6 by themselves. 4 will move back and 6 will move forward.
You are moving by word. To move by line, use 7 and 9. To move by letter,
use 1 and 3.
When you get to the beginning of what you want to select, issue the command
NVDA f9. Move to the end of what you want to select and issue the command
NVDA f10 quickly. You should hear something indicating that text was
selected. To copy text to the clipboard, issue the command twice quickly,
not once.

Gene
-----Original Message-----
From: Jonathan Milam
Sent: Tuesday, August 04, 2020 8:48 AM
To: nvda@nvda.groups.io
Subject: [nvda] Selecting text



Hi All,



I am testing a web application called “Hypothesis” and need to be able to
select text while in browse mode, separate from the caret. Is there a way
of selecting text with NVDA in one of its object modes so that I can have
the main browser cursor elsewhere?



Thanks,

Jonathan