Date   

Re: nvda latest RC version don't speak when in settings or windows defender program

Quentin Christensen
 

I did have someone else with a very similar issue, and after they restarted the computer it was all working again.  So, a reminder to please restart the computer after installing or updating any software, including NVDA.

Kind regards

Quentin.

On Mon, Dec 17, 2018 at 10:09 PM Brian's Mail list account via Groups.Io <bglists=blueyonder.co.uk@groups.io> wrote:
Hi, firstly we would need to know the exact build of Windows you have as
there are differences.
 To get a log there are many ways.  Firstly open up a blank copy of notepad.
 Go to the  part of windows not working as it should and do an NVDA/F1. This
should open the log viewer with the  last entries the bits of diagnostic
info needed. However go up the file until you can hear the part where you go
into the non working part and  select all the file from there to the bottom
of the  file and cut and paste it into notepad, and save it as something
meaningful, in case of any crashes.
 Get back to the email software, start a message with the sub line of your
problem in this group first,  put the details of the windows version etc
and the problem and then cut and paste the contents of the notepad to the
bottom of the message.
 Before doing this I would advise that you go to nvda settings and general
and select the debug level for your log as this will have more details in it
before you attempt to show the issue.

I hope this makes sense.
 If somebody here  can get a good look and duplicate the issue then fine, if
not then you might have some odd windows issue.

If nobody can resolve it you may need to get an account on github web site
and raise a new issue for it.
 However I'd suggest trying the new  release version if you have not
already. also try to test with all add ons disabled firs as some odd things
can happen if one is old or misbehaving for whatever reason.
 Brian

bglists@...
Sent via blueyonder.
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Joseph Weakland" <josephweakland@...>
To: "nvda discussion list" <nvda@nvda.groups.io>
Sent: Sunday, December 16, 2018 9:16 PM
Subject: [nvda] nvda latest RC version don't speak when in settings or
windows defender program


> when i launch settings, or windows defender program NVDA latest RC2 goes
> silent and when i do an insert t it says explorer not actual program
> window:( what gives here and how can i produce log to email here as proof
> of this
>
>
> --
> Joseph Weakland
> email
> josephweakland@...
> sent from my windows 10 pc
>
>
>
>






--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


Emoji panel

Don H
 

Is there a totorial as how to use the Emoji panel in Win 10? I know how to open it but how do you select and place the Emoji in a Email?
Thanks


Re: dectalk express u s b

larry k <sirlaurence.larry@...>
 

yes, drivers have been installed.

-----Original Message-----
From: Tyler Spivey
Sent: Monday, December 17, 2018 14:30
To: nvda@nvda.groups.io
Subject: Re: [nvda] dectalk express u s b

First, let's get the basics out of the way. Do you have the drivers
installed?
If not, go here and get them. If your PC is 64-bit, you'll want the
64-bit driver:

http://www.axsol.com/downloads.php

Once these are installed, restart your computer and try again.

Last I checked many years ago, that addon worked. I don't have a
dectalk, so can't debug it here. If you really want it to work, we might
be able to debug remotely with you on Skype or something, but I can't
guarantee anything.

On 12/17/2018 1:15 PM, larry k wrote:
synth is connectedby u s b.
it doesn't talk at all.
this is the one labeled u s b.


-----Original Message----- From: Tyler Spivey
Sent: Monday, December 17, 2018 14:12
To: nvda@nvda.groups.io
Subject: Re: [nvda] dectalk express u s b

What is it doing? Exactly which addon do you have and does it talk at
all? How is the synth connected, serial or USB?

On 12/17/2018 1:07 PM, larry k wrote:
the dectalk express add on doesn’t work correctly. does anyone have any
tips to make it work with the synthesizer?
larry






Re: dectalk express u s b

Tyler Spivey
 

First, let's get the basics out of the way. Do you have the drivers
installed?
If not, go here and get them. If your PC is 64-bit, you'll want the
64-bit driver:

http://www.axsol.com/downloads.php

Once these are installed, restart your computer and try again.

Last I checked many years ago, that addon worked. I don't have a
dectalk, so can't debug it here. If you really want it to work, we might
be able to debug remotely with you on Skype or something, but I can't
guarantee anything.

On 12/17/2018 1:15 PM, larry k wrote:
synth is connectedby u s b.
it doesn't talk at all.
this is the one labeled u s b.


-----Original Message----- From: Tyler Spivey
Sent: Monday, December 17, 2018 14:12
To: nvda@nvda.groups.io
Subject: Re: [nvda] dectalk express u s b

What is it doing? Exactly which addon do you have and does it talk at
all? How is the synth connected, serial or USB?

On 12/17/2018 1:07 PM, larry k wrote:
the dectalk express add on doesn’t work correctly. does anyone have any
tips to make it work with the synthesizer?
larry






Re: 32Bit or 64Bit Office with NVDA

 

Thanks, thought it would but you never know.

On 12/18/2018 5:12 AM, Brian K. Lingard wrote:
Dear Shaun & List:

The office Product key entitles you to download either the 32 or 64-bit version of the package.

I have 64-bit Laptop, prefer the 64-bit Office as it works with extremely large files better.
Brian K. Lingard

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf of Shaun Everiss
Sent: October 5, 2018 12:27 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] 32Bit or 64Bit Office with NVDA

It does not matter.

I have 32 bit, if you have more than 4gb ram and you probably do 64 is fine 64 is only for large files but you can install it.

Your licence key will probably work on both.



On 10/6/2018 3:57 AM, Noah Carver via Groups.Io wrote:
Hi All,


I am installing office for the first time. Should I use the 32-bit or
64-bit versions of office. Which one has the most compatibility?


Thanks in advance,
Noah


Re: Virtual Dub.

 

Well, go to codecguide.com, get and install mega codec or full codec.

On 12/18/2018 4:23 AM, Chantelle Buys wrote:
I've just found that I can't for some odd reason load AVI videos and
I'm also having problems with the rest of the program.

Chantelle

On 12/17/18, AKH AKH <tvz@hotmail.co.uk> wrote:
I've got Virtual Dub video editer, but I can't get to the editing
section in the HELP notes.  Can anyone access them, please?


Andrew

On 17/12/2018 13:48, Chantelle Buys wrote:
Thank you.

I'll add some whenever I can find something that works.

I'm trying to get Microsoft to either bring Movie Maker back or put
its layout on the photos app as an add on or feature.

Chantelle

On 12/17/18, Robert Kingett <kingettr@gmail.com> wrote:
The [NVDA applications
wiki](https://github.com/nvaccess/nvda-community/wiki/Application-Support)
has a few suggestions. If you find any others, add it to the wiki. I'm
continously amazed why people aren't contributing to the open source
wiki.





Re: dectalk express u s b

larry k <sirlaurence.larry@...>
 

synth is connectedby u s b.
it doesn't talk at all.
this is the one labeled u s b.

-----Original Message-----
From: Tyler Spivey
Sent: Monday, December 17, 2018 14:12
To: nvda@nvda.groups.io
Subject: Re: [nvda] dectalk express u s b

What is it doing? Exactly which addon do you have and does it talk at
all? How is the synth connected, serial or USB?

On 12/17/2018 1:07 PM, larry k wrote:
the dectalk express add on doesn’t work correctly. does anyone have any
tips to make it work with the synthesizer?
larry


Re: dectalk express u s b

Tyler Spivey
 

What is it doing? Exactly which addon do you have and does it talk at
all? How is the synth connected, serial or USB?

On 12/17/2018 1:07 PM, larry k wrote:
the dectalk express add on doesn’t work correctly. does anyone have any
tips to make it work with the synthesizer?
larry


dectalk express u s b

larry k <sirlaurence.larry@...>
 

the dectalk express add on doesn’t work correctly. does anyone have any tips to make it work with the synthesizer?
larry


Re: unable to post comment on YouTube

Gene
 

I don't know if this is a problem that NVDA can solve, but whether it is or not, there are edit fields on some web sites where you need to write the comment and then paste it in.  I just worked with one a day or two ago.  Every letter appeared to be on its own line.  When the comment was in the edit field, it read correctly in browse mode but not when browse mode was off.  It isn't just this site and it is necessary to know this workaround.
 
Gene

----- Original Message -----
Sent: Monday, December 17, 2018 2:28 PM
Subject: Re: [nvda] unable to post comment on YouTube

O no, its weird, 1st write a comment on notepad. And then paste it on the edit box? Why the simple edit box is inaccessible. It should be fix as soon as possible. Isn’t it?

 

Regards

Abdul Muhamin.

Chief content officer at

Blind Help Project

Catch me on,

Facebook

Or

Whats app

Or

Skype.

Follow me on,

Twitter.

Email me at

A.muhamin@...

                                                                                              

                                                      

 

From: Gene
Sent: Monday, December 17, 2018 5:00 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] unable to post comment on YouTube

 

I haven't tried to post a comment.  But the comment may be being written even if NVDA can't read it.  Write the comment in Notepad, then paste it into the edit field.  then go into browse mode and see if it is there.

 

Gene

----- Original Message -----

Sent: Monday, December 17, 2018 5:13 AM

Subject: [nvda] unable to post comment on YouTube

 

Hi all, as the subject says,

I’m unable to write comment on YouTube., on the edit box. When writing a comment, NVDA speaks only letters, and doesn’t write anything. Please fix that. Using the latest Firefox, and the latest NVDA

 

 

 

Regards

Abdul Muhamin.

Chief content officer at

Blind Help Project

Catch me on,

Facebook

Or

Whats app

Or

Skype.

Follow me on,

Twitter.

Email me at

A.muhamin@...

                                                                                              

                                                      

 

 


Re: unable to post comment on YouTube

abdul muhamin
 

O no, its weird, 1st write a comment on notepad. And then paste it on the edit box? Why the simple edit box is inaccessible. It should be fix as soon as possible. Isn’t it?

 

Regards

Abdul Muhamin.

Chief content officer at

Blind Help Project

Catch me on,

Facebook

Or

Whats app

Or

Skype.

Follow me on,

Twitter.

Email me at

A.muhamin@...

                                                                                              

                                                      

 

From: Gene
Sent: Monday, December 17, 2018 5:00 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] unable to post comment on YouTube

 

I haven't tried to post a comment.  But the comment may be being written even if NVDA can't read it.  Write the comment in Notepad, then paste it into the edit field.  then go into browse mode and see if it is there.

 

Gene

----- Original Message -----

Sent: Monday, December 17, 2018 5:13 AM

Subject: [nvda] unable to post comment on YouTube

 

Hi all, as the subject says,

I’m unable to write comment on YouTube., on the edit box. When writing a comment, NVDA speaks only letters, and doesn’t write anything. Please fix that. Using the latest Firefox, and the latest NVDA

 

 

 

Regards

Abdul Muhamin.

Chief content officer at

Blind Help Project

Catch me on,

Facebook

Or

Whats app

Or

Skype.

Follow me on,

Twitter.

Email me at

A.muhamin@...

                                                                                              

                                                      

 

 


Re: unable to post comment on YouTube

abdul muhamin
 

I’m using latest firefox with latest NVDA

 

Regards

Abdul Muhamin.

Chief content officer at

Blind Help Project

Catch me on,

Facebook

Or

Whats app

Or

Skype.

Follow me on,

Twitter.

Email me at

A.muhamin@...

                                                                                              

                                                      

 

From: Sarah k Alawami
Sent: Monday, December 17, 2018 10:36 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] unable to post comment on YouTube

 

What browser are  you using? I can write comments just fine in firefox.

 

On 17 Dec 2018, at 3:44, Brian's Mail list account via Groups.Io wrote:

 

> Does it go into focus mode correctly on the field, do you know?

> Brian

> bglists@...

> Sent via blueyonder.

> Please address personal E-mail to:-

> briang1@..., putting 'Brian Gaff'

> in the display name field.

> ----- Original Message ----- From: "abdul muhamin"

> <abdulmuhamin600@...>

> To: <nvda@nvda.groups.io>

> Sent: Monday, December 17, 2018 11:13 AM

> Subject: [nvda] unable to post comment on YouTube

>> Hi all, as the subject says,

>> I’m unable to write comment on YouTube., on the edit box. When

>> writing a comment, NVDA speaks only letters, and doesn’t write

>> anything. Please fix that. Using the latest Firefox, and the latest

>> NVDA

>> 

>> 

>> 

>> Regards

>> Abdul Muhamin.

>> Chief content officer at

>> Blind Help Project

>> Catch me on,

>> Facebook

>> Or

>> Whats app

>> Or

>> Skype.

>> Follow me on,

>> Twitter.

>> Email me at

>> A.muhamin@...

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>

 

 

 


Glad iTunes is working well with NVDA 2018.4

Lino Morales
 

Hi all I can now read the lists of items with column browser enabled with NVDA 2018.4. I don’t know if the new version now has access to new UIA stuff or not, but its now working. It also works with today’s JAWS 2019 update as well.

 

Sent from Mail for Windows 10

 


Problem installing latest update

Janet Brandly
 

Hello all, especially NVDA Support,
 
I’m having a problem with the latest update. It seemed to download OK after I got the prompt, but it wouldn’t install. It asked me to review the log view which I did, but it doesn’t make any sense to me. I looked for the software in my download folder to install it manually, but it wasn’t there. Any help with this would be much appreciated.
 
Thank you,
 
Jan


Re: ERROR - RPC process 6240 (explorer.exe) (08:21:58.492): with NVDA 2018.4

Adriani Botez
 

Hello Paul,

 

did you try to use the com fixing tool in NVDA menu / Extras? To me it seems that some com dlls cannot be registered.

 

Best

Adriani

 

 

 

Von: nvda@nvda.groups.io <nvda@nvda.groups.io> Im Auftrag von bering.p
Gesendet: Montag, 17. Dezember 2018 11:12
An: nvda courrier <nvda@nvda.groups.io>
Betreff: [nvda] ERROR - RPC process 6240 (explorer.exe) (08:21:58.492): with NVDA 2018.4

 



Paul.

  Hi,
Steps to reproduice:
- restart NVDA,
- "NVDA+F1" to open NVDA log,
- "Escape" to close NVDA log.
The error occurs.

This is the log:
INFO - __main__ (08:21:50.756):
Starting NVDA
INFO - core.main (08:21:51.039):
Config dir: F:\documents\Paulo\temp\nvda 2018.4 Noémie\userConfig
INFO - config.ConfigManager._loadConfig (08:21:51.039):
Loading config: .\userConfig\nvda.ini
INFO - core.main (08:21:51.244):
NVDA version 2018.4
INFO - core.main (08:21:51.244):
Using Windows version 10.0.17134 workstation
INFO - core.main (08:21:51.244):
Using Python version 2.7.15 (v2.7.15:ca079a3ea3, Apr 30 2018, 16:22:17) [MSC v.1500 32 bit (Intel)]
INFO - core.main (08:21:51.244):
Using comtypes version 1.1.3
INFO - core.main (08:21:51.249):
Using configobj version 5.1.0 with validate version 1.0.1
INFO - core.main (08:21:51.319):
Add-ons are disabled. Restart NVDA to enable them.
DEBUGWARNING - touchHandler.touchSupported (08:21:51.499):
Touch only supported on installed copies
INFO - synthDrivers.espeak.SynthDriver.__init__ (08:21:52.128):
Using eSpeak NG version 1.49.3 dev
INFO - synthDriverHandler.setSynth (08:21:52.976):
Loaded synthDriver espeak
INFO - core.main (08:21:52.976):
Using wx version 4.0.3 msw (phoenix) wxWidgets 3.0.5
INFO - brailleInput.initialize (08:21:52.976):
Braille input initialized
INFO - braille.initialize (08:21:52.976):
Using liblouis version 3.7.0
INFO - braille.BrailleHandler.setDisplayByName (08:21:52.992):
Loaded braille display driver noBraille, current display has 0 cells.
WARNING - core.main (08:21:53.045):
Java Access Bridge not available
INFO - _UIAHandler.UIAHandler.MTAThreadFunc (08:21:53.075):
UIAutomation: IUIAutomation5
DEBUGWARNING - touchHandler.touchSupported (08:21:54.026):
Touch only supported on installed copies
INFO - core.main (08:21:54.032):
NVDA initialized
DEBUGWARNING - characterProcessing._getSpeechSymbolsForLocale (08:21:54.178):
No CLDR data for locale fr_FR
DEBUGWARNING - displayModel.DisplayModelTextInfo._get__storyFieldsAndRects (08:21:56.959):
AppModule does not have a binding handle
INFO - globalCommands.GlobalCommands.script_navigatorObject_devInfo (08:21:57.131):
Developer info for navigator object:
name: u'nvda 2018.4 No\xe9mie'
role: ROLE_LISTITEM
states: STATE_FOCUSABLE, STATE_SELECTABLE, STATE_FOCUSED, STATE_SELECTED
isFocusable: True
hasFocus: True
Python object: <baseObject.Dynamic_UIItemListItemUIA object at 0x03DA2A50>
Python class mro: (<class 'baseObject.Dynamic_UIItemListItemUIA'>, <class 'NVDAObjects.UIA.UIItem'>, <class 'NVDAObjects.UIA.ListItem'>, <class 'NVDAObjects.UIA.UIA'>, <class 'NVDAObjects.window.Window'>, <class 'NVDAObjects.NVDAObject'>, <class 'documentBase.TextContainerObject'>, <class 'baseObject.ScriptableObject'>, <class 'baseObject.AutoPropertyObject'>, <type 'object'>)
description: ''
location: RectLTWH(left=174, top=323, width=574, height=22)
value: ''
appModule: <'explorer' (appName u'explorer', process ID 6240) at address 3cee850>
appModule.productName: u'Syst\xe8me d\u2019exploitation Microsoft\xae Windows\xae'
appModule.productVersion: u'10.0.17134.464'
TextInfo: <class 'NVDAObjects.NVDAObjectTextInfo'>
windowHandle: 721684
windowClassName: u'DirectUIHWND'
windowControlID: 0
windowStyle: 1442840576
windowThreadID: 1448
windowText: u''
displayText: u''
UIAElement: <POINTER(IUIAutomationElement) ptr=0x63565b8 at 3cf5530>
UIA automationID: 10
UIA frameworkID: DirectUI
UIA runtimeID: (6240, 236306288, 0)
UIA providerDescription: [pid:6240,providerId:0x0 Main(parent link):Unidentified Provider (unmanaged:explorerframe.dll)]
UIA className: UIItem
UIA patterns available: LegacyIAccessiblePattern, InvokePattern, ScrollItemPattern, SelectionItemPattern, ValuePattern
DEBUGWARNING - Python warning (08:21:57.338):
F:\documents\Paulo\temp\nvda 2018.4 Noémie\library.zip\api.py:274: DeprecationWarning: Yield() is deprecated
ERROR - RPC process 6240 (explorer.exe) (08:21:58.477):
Thread 1448, build\x86\remote\COMProxyRegistration.cpp, registerCOMProxy, 99:
Error activating activation context for IAccessible2Proxy.dll

ERROR - RPC process 6240 (explorer.exe) (08:21:58.477):
Thread 1448, build\x86\remote\ia2Support.cpp, installIA2Support, 59:
Error registering IAccessible2 proxy

ERROR - RPC process 6240 (explorer.exe) (08:21:58.492):
Thread 1448, build\x86\remote\COMProxyRegistration.cpp, registerCOMProxy, 99:
Error activating activation context for ISimpleDOM.dll

ERROR - RPC process 6240 (explorer.exe) (08:21:58.502):
Thread 1448, build\x86\remote\ia2Support.cpp, installIA2Support, 63:
Error registering ISimpleDOM proxy


Re: Video editor for screen readers or add on that works with a video editor.

Sarah k Alawami
 

Reaper is a audio editor and a video editor. I really love it and it is lite weight..

Take care

On 17 Dec 2018, at 9:59, Chantelle Buys wrote:

ReaperHi.

Is it the Reaper audio version?

Chantelle

On 12/17/18, Sarah k Alawami marrie12@... wrote: > Reaper will du you good. I use it to edit most of my videos, the ones > that need editing. Ther are video plugs for reaper but now I've > forgotten what they are. > > Take care > > On 17 Dec 2018, at 3:02, Chantelle Buys wrote: > >> Afternoon everyone. >> >> Does anyone know of a video editing program that would work with >> NVDA >> or know of someone who would be able to make an add on that would >> work >> with one? >> >> I use to make YouTube videos with Movie Maker and since Windows10 >> came >> around, I wasn't able to edit anything anymore. >> >> I've downloaded almost every video editing program I could think of >> that would work with NVDA and the keyboard but, no such luck. >> >> I don't mind which program, as long as it can split, copy, cut and >> do >> all the basic things like movie maker. >> >> Can anyone help please? >> >> Chantelle >> >> -- >> Never give up, at any cost. >> >> > > > >

-- Never give up, at any cost.


Re: Video editor for screen readers or add on that works with a video editor.

Chantelle Buys
 

ReaperHi.

Is it the Reaper audio version?

Chantelle

On 12/17/18, Sarah k Alawami <marrie12@gmail.com> wrote:
Reaper will du you good. I use it to edit most of my videos, the ones
that need editing. Ther are video plugs for reaper but now I've
forgotten what they are.

Take care

On 17 Dec 2018, at 3:02, Chantelle Buys wrote:

Afternoon everyone.

Does anyone know of a video editing program that would work with NVDA
or know of someone who would be able to make an add on that would work
with one?

I use to make YouTube videos with Movie Maker and since Windows10 came
around, I wasn't able to edit anything anymore.

I've downloaded almost every video editing program I could think of
that would work with NVDA and the keyboard but, no such luck.

I don't mind which program, as long as it can split, copy, cut and do
all the basic things like movie maker.

Can anyone help please?

Chantelle

--
Never give up, at any cost.



--
Never give up, at any cost.


Re: Last NVDA: How do I update it?

 

Ok. Thanks for the answer, Brian.
Em 17/12/2018 09:21, Brian's Mail list account via Groups.Io escreveu:

Not really. If say a bug is spotted on the normal release version, a new release version say.4.1 is made and the fix exported back to Alpha as well to make sure both are based on the same code.
The other way around of course, the whole point of alpha is for new features and fixes to be tested. You do not want untested code going to a stable version. In the old days we also had a  channel where tested alpha code was in a beta, but now that only starts to appear nearer a release time. You need to watch for this on the snapshots page, which is what I do. The reason is that at times new enhancements come out that affect the beta and it will have to be altered, so the point of beta is to have it more or less fixed in stone before letting the public  destructively test it!

Brian

bglists@...
Sent via blueyonder.
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message ----- From: "marcio via Groups.Io" <marcinhorj21@...>
To: <nvda@nvda.groups.io>
Sent: Monday, December 17, 2018 1:25 AM
Subject: Re: [nvda] Last NVDA: How do I update it?


Hi Hurrikennyandopo,
Thanks for your explanation, it was very clear.
But the question is: people of the NVDA Alpha channel receive updates
from the Stable or there's a chance of having something on the stable
and not on the alpha?

------------------------------------------------------------------------
Cheers,
Marcio

------------------------------------------------------------------------
Where to find me:
My Yahoo! email <mailto:marcinhorj21@...>
Add me on Skype <skype:marcinhorj666?add>
Follow me on Twitter <https://twitter.com/firirinfonfon>
Follow or add me on Facebook <https://facebook.com/firirinfonfon>
Ask me something on CuriousCat <https://curiouscat.me/firirinfonfon>
------------------------------------------------------------------------
Phone(s):
(+55)21-9-81615268 (Tim-RJ)
------------------------------------------------------------------------
My WhatsApp <https://api.whatsapp.com/send?phone=5521981615268>
------------------------------------------------------------------------
Em 16/12/2018 23:18, hurrikennyandopo ... escreveu:

Hi Marcio


if you are running the alfa version as a installed version it will
stay on the alfa version for updates.



The way a few of us do it is they might keep the stable version as the
main installer version.


If they want to test out either the alfa version or beta version then
they would make up a directory on the c: drive and either name it alfa
version of nvda or beta version of nvda or along those lines.


They would then download either the alfa version or beta version and
then make a portable copy inside of either directory and have the
files put into it.


Then they would make a shortcut from the desktop either to the alfa
version or the beta version to the nvda.exe file and also asign a
shortcut to start that copy.


I have a alfa version plus the beta version plus the stable version on
this computer.


so when you go to start it lets say for the alfa version the hot key
could be alt + ctrl + the letter A.


So when you say look at my c: drive i would have c:\ nvda alfa

c:\ nvda beta

programfiles x86 nvda which is the stable version.


Hope you get what i mean.



On 17/12/2018 2:03 PM, marcio via Groups.Io wrote:
Hi Quentin,
First, thanks for your answer.
Just to see if I got it right: If I download this version, I'll
automatically lose the Alpha channel?
If so, how I can stay up to date about news on the NVDA stable
without losing it?
I mean, staying in the Alpha channel I won't receive news from the
stable version, or will I?
Maybe it's a stupid question but I still am confused about these
channels.

------------------------------------------------------------------------
Cheers,
Marcio
------------------------------------------------------------------------
Where to find me:
My Yahoo! email <mailto:marcinhorj21@...>
Add me on Skype <skype:marcinhorj666?add>
Follow me on Twitter <https://twitter.com/firirinfonfon>
Follow or add me on Facebook <https://facebook.com/firirinfonfon>
Ask me something on CuriousCat <https://curiouscat.me/firirinfonfon>
------------------------------------------------------------------------
Phone(s):
(+55)21-9-81615268 (Tim-RJ)
------------------------------------------------------------------------
My WhatsApp <https://api.whatsapp.com/send?phone=5521981615268>
------------------------------------------------------------------------
Em 16/12/2018 21:59, Quentin Christensen escreveu:
Hi Marcio,

You can download the update from https://www.nvaccess.org/download -
when you install it, the installer will automatically install over
your existing installed version.

The Beta channel automatically updates to the RC channel.
The RC channel automatically updates to the next stable release.

The alpha channel stays on the alpha channel. If you would like to
change from alpha to stable, you will need to download manually.

So anyone who downloaded either the beta or RC releases should be
prompted to update to NVDA 2018.4 stable, but you can also download
it manually and install.

Note that NVDA only checks once every 24 hours or so; for those
following us on social media or in the groups here, you often find
out before NVDA has checked. You can either download or check for
updates manually, or wait and it will do it within a day or so.

Regards

Quentin.

On Mon, Dec 17, 2018 at 10:37 AM marcio via Groups.Io
<marcinhorj21@...
<mailto:yahoo.com.br@groups.io>> wrote:

    Hello folks.
    I'm on the NVDA Alpha channel. I got informed that a new version
    was available, but not for the channel, I read it here just now.
    The thing is: when I was going to check for updates it shows me
    nothing.
    Anyone knows what can be happening and how to fix it?
    --
    ------------------------------------------------------------------------
    Cheers,
    Marcio
    ------------------------------------------------------------------------
    Where to find me:
    My Yahoo! email <mailto:marcinhorj21@...>
    Add me on Skype
    Follow me on Twitter <https://twitter.com/firirinfonfon>
    Follow or add me on Facebook <https://facebook.com/firirinfonfon>
    Ask me something on CuriousCat
    <https://curiouscat.me/firirinfonfon>
    ------------------------------------------------------------------------
    Phone(s):
    (+55)21-9-81615268 (Tim-RJ)
    ------------------------------------------------------------------------
    My WhatsApp <https://api.whatsapp.com/send?phone=5521981615268>
    ------------------------------------------------------------------------



-- 
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now
available: http://www.nvaccess.org/shop/

www.nvaccess.org <http://www.nvaccess.org/>
Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess

-- 
Image NVDA certified expert
Check out my website for NVDA tutorials and other blindness related
material at http://www.accessibilitycentral.net Regardless of where
you are in New Zealand if you are near one of the APNK sites you can
use a copy of the NVDA screen reader on one of their computers. To
find out which locations (or location) is near to you please visit
http://www.aotearoapeoplesnetwork.org/content/partner-libraries
(Aotearoa People's Network Kaharoa). To find an NVDA certified expert
near you, please visit the following link
https://certification.nvaccess.org/. The certification page contains
the official list of NVDA certified individuals from around the world,
who have sat and successfully passed the NVDA expert exam.













Re: 32Bit or 64Bit Office with NVDA

Brian K. Lingard
 

Dear Noah & List:
Select your Office version based on whether you have a 32 or 64 bit PC.

If your PC has only the programs folder it is 32 bit.
If it also has a folder system32, it is a 64-bit PC.

Office 64-bit can edit and manipulate larger spreadsheet, word and such files than the 32-bit version.
Brian K. Lingard


From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf of Noah Carver via Groups.Io
Sent: October 5, 2018 10:57 AM
To: nvda@nvda.groups.io
Subject: [nvda] 32Bit or 64Bit Office with NVDA

Hi All,


I am installing office for the first time. Should I use the 32bit or
64bit versions of office. Which one has the most compatibility?


Thanks in advance,


Noah


Re: unable to post comment on YouTube

Sarah k Alawami
 

What browser are you using? I can write comments just fine in firefox.

On 17 Dec 2018, at 3:44, Brian's Mail list account via Groups.Io wrote:

Does it go into focus mode correctly on the field, do you know? Brian

bglists@... Sent via blueyonder. Please address personal E-mail to:- briang1@..., putting 'Brian Gaff' in the display name field. ----- Original Message ----- From: "abdul muhamin" abdulmuhamin600@... To: nvda@nvda.groups.io Sent: Monday, December 17, 2018 11:13 AM Subject: [nvda] unable to post comment on YouTube

Hi all, as the subject says, I’m unable to write comment on YouTube., on the edit box. When writing a comment, NVDA speaks only letters, and doesn’t write anything. Please fix that. Using the latest Firefox, and the latest NVDA

Regards Abdul Muhamin. Chief content officer at Blind Help Project Catch me on, Facebook Or Whats app Or Skype. Follow me on, Twitter. Email me at A.muhamin@...