Date   

nvda snapshot alpha - 22409

Wagner Soares Da Silva
 

Hello, special thanks to the entire NVDA team for fixing the bug with Windows 8 from this Alpha version of NVDA.

Since the migration to Python 3.8, the Alphas versions of NVDA have started to present serious problems in Windows 8.

Fortunately, starting with version 22409, apparently, the problem has been solved.

Thanks to the developers of the best screen reader for Windows.


Grande Abraço, Wagner.

Telegram:

https://t.me/wagnersilvass

Facebook:

https://www.facebook.com/wagner.soaresdasilva.167

ICQ New:

https://icq.com/invite/wagnersilvass

Instagram:

https://www.instagram.com/wagner.silvass/

Twitter:

https://twitter.com/wagnersilvass

Crie Uma Conta Gratuita No Dropbox E Ganhe 500 MB De Espaços Como Bônus.

Basta Clicar No Link Abaixo:

https://db.tt/BxliG5KI


Re: On posting e-mail addresses in messages - Please don't #adminnotice

 

On Mon, Apr 19, 2021 at 02:54 PM, Gene wrote:
I hope the discussion helps others with problems that might be resolved in this way.
-
As do I, and it's not limited to Windows, or Office, or NVDA, or any particular single thing or cluster of things.  Turning something off and on again, uninstalling/removing and then promptly reinstalling, or similar is one of the fundamental troubleshooting and diagnostic steps for anything.  We've seen plenty of instances over the years where toggling an NVDA setting that's misbehaving magically makes it behave again, even though what you're setting it to in the end is what it was set to in the beginning.

The one thing I'll add is that it's never a bad idea to toggle the setting, exit whatever it is you toggled it for, restart, then toggle it back.  That's not absolutely essential, but there are occasions where the straight toggle doesn't work, but where toggle-exit-restart-toggle does.  And, no, don't anyone dare ask me why, as no technician in the world has the answer to that mystery!
 
--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

Always remember others may hate you but those who hate you don't win unless you hate them.  And then you destroy yourself.

       ~ Richard M. Nixon

 


Re: On posting e-mail addresses in messages - Please don't #adminnotice

Gene
 

I hope the discussion helps others with problems that might be resolved in this way.

Gene

-----Original Message-----
From: Brian Vogel
Sent: Monday, April 19, 2021 1:32 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] On posting e-mail addresses in messages - Please don't #adminnotice

On Mon, Apr 19, 2021 at 02:24 PM, Gene wrote:
I corrected the problem by making another e-mail program the default, then making Windows Live Mail the default again.-
Which indicates that there was some small corruption in your existing setup. And I say that because there are all sorts of small corruptions that can creep in on any system and through no direct user action.

What you did, which is a great idea, is the equivalent of the oft-given question/advice: Did you turn it off and on again? Resetting a given setting, saving it, then setting it back to what you thought it was in the first place (but wasn't acting that way) is a great simple diagnostic. It doesn't always work, nothing will, but things that are dirt simple to try and take mere minutes are worth trying.
--


Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042

Always remember others may hate you but those who hate you don't win unless you hate them. And then you destroy yourself.

~ Richard M. Nixon


Re: On posting e-mail addresses in messages - Please don't #adminnotice

 

On Mon, Apr 19, 2021 at 02:24 PM, Gene wrote:
I corrected the problem by making another e-mail program the default, then making Windows Live Mail the default again.
-
Which indicates that there was some small corruption in your existing setup.  And I say that because there are all sorts of small corruptions that can creep in on any system and through no direct user action.

What you did, which is a great idea, is the equivalent of the oft-given question/advice:  Did you turn it off and on again?    Resetting a given setting, saving it, then setting it back to what you thought it was in the first place (but wasn't acting that way) is a great simple diagnostic.  It doesn't always work, nothing will, but things that are dirt simple to try and take mere minutes are worth trying.
--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

Always remember others may hate you but those who hate you don't win unless you hate them.  And then you destroy yourself.

       ~ Richard M. Nixon

 


Re: On posting e-mail addresses in messages - Please don't #adminnotice

Gene
 

I corrected the problem by making another e-mail program the default, then making Windows Live Mail the default again. Now, a reply to the sender opens in Windows Live Mail.

Gene

-----Original Message-----
From: Brian Vogel
Sent: Monday, April 19, 2021 12:44 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] On posting e-mail addresses in messages - Please don't #adminnotice

On Mon, Apr 19, 2021 at 01:23 PM, Gene wrote:
It looks as though when you follow the reply to sender link and you are using an e-mail program, that opens a browser-
It shouldn't. I'm not saying it doesn't, but that means something is configured wrong on the system in question.

The Reply to Sender link is a dirt common mailto: link. Activating a mailto: link should cause the default e-mail mechanism, be it an email client or webmail if the "flow through" has been configured (and that's extra steps in many cases), to open and behave as I previously stated. A web browser should not be opened unless the system in question has the default mail client set as a web browser. If that's happening, if you activate a mailto link anywhere outside your e-mail client it will likely open up the web browser. That can be tested on any webpage, usually Contact Us, that happens to have a mailto: link. If people want to test using my webpage, britechguy.com, feel free to do so. The main page has the word, with hyphen, e-mail immediately followed with a mailto link for the same address I use to subscribe here. On systems where an email client is configured as the default email mechanism it should cause a compose window to open with my email address prepopulated in the To field. When I activate it myself, I'm getting a pop-up dialog from the browser saying that it wants to open eM Client and would I allow that, and I have eM Client configured as my default email client at the moment on this machine.

As to non-Groups.io lists, I agree a document would be handy, but that's outside of the scope of what I am discussing here. I'm sticking to how Groups.io works.

--


Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042

Always remember others may hate you but those who hate you don't win unless you hate them. And then you destroy yourself.

~ Richard M. Nixon


Re: stream pc audio with nvda remote?

Bob Cavanaugh <cavbob1993@...>
 

Re: Edcast.
While Edcast isn't around anymore, the developers have reorganized and
come out with Alta Cast, which looks and I assume functions very
similarly to Edcast. I installed Alta Cast a few months ago hoping to
test how it streams with Zara over a test server, but haven't gotten
around to setting one up yet.

On 4/19/21, Vinod Benjamin <vinbenji.group@gmail.com> wrote:
Dear Luke,

Thanks for the extensive reply, let me try.

Regards,
Vinod Benjamin

On 4/19/21, Luke Davis <luke@newanswertech.com> wrote:
There used to be software called Airfoil, that sent audio from one
computer
to
any others. However it has been discontinued.

The spiritual successor seems to be this:
https://www.stardock.com/products/acousticbridge/
And before you ask: I don't know if it's accessible.

As for more DIY answers.

Doing this kind of thing was much more popular 10-15 years ago it seems.
Most of the solutions out there speak of Win 7, vista, or 98. Most
software
for
doing it has gone away now, or can only be found in very old versions.

Pulseaudio can do this, but God bless you and help you if you decide to
spend
time working with Pulseaudio. Even I won't go near that one any more.

There are several possible solutions here:
https://sound.stackexchange.com/questions/22921/stream-windows-audio-over-the-network

The best one seems to be the Edcast -> Icecast answer, but even Edcast is
only
available in the Google Code Vault.

Another (partial) option might be this software here:
https://github.com/duncanthrax/scream

It claims to only work on the local network, but if you are clever with
networking and such you might be able to convince it to work over a point
to

point VPN or something like that.

Were I to try this, I would probably use FFMpeg to pick up the local PCM
stream,
convert it to MP3 or OGG, pipe that into a local icecast server, and have
your
remote machine listen to that compressed stream.
Alternatively, you might be able to do something with VLC, but I'm no
expert.

There are recipes out there for going from Linux to Windows via FFMPeg
and
FFPlay. I'm sure you could adapt those for Windows-to-Windows, using the
loopback sound driver that Windows has.

Good luck.

--
Luke

"In this life there are obstacles, and forces who overcome obstacles. You
can be either one or the other.
If you refuse to even try to clear an obstacle, you become the obstacle."
- Joel Shepherd










Re: On posting e-mail addresses in messages - Please don't #adminnotice

Gene
 

I'm not sure what I would change, perhaps there is a browser setting that needs to be changed. My e-mail program is set as the default program but there is some other problem. If others have this sort of problem, I found a work around that may be helpful.

If I am on the reply to sender link, I can use the context menu in Windows Live Mail and Firefox to copy the link or shortcut, whatever the e-mail program calls it to the clipboard. I can then start a new message and paste the address in. I may have to edit it, depending on what is copied to the clipboard, but the address is there.

I would expect this can be done in Outlook, I have no idea about the Windows 10 mail app.

Gene

-----Original Message-----
From: Brian Vogel
Sent: Monday, April 19, 2021 12:44 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] On posting e-mail addresses in messages - Please don't #adminnotice

On Mon, Apr 19, 2021 at 01:23 PM, Gene wrote:
It looks as though when you follow the reply to sender link and you are using an e-mail program, that opens a browser-
It shouldn't. I'm not saying it doesn't, but that means something is configured wrong on the system in question.

The Reply to Sender link is a dirt common mailto: link. Activating a mailto: link should cause the default e-mail mechanism, be it an email client or webmail if the "flow through" has been configured (and that's extra steps in many cases), to open and behave as I previously stated. A web browser should not be opened unless the system in question has the default mail client set as a web browser. If that's happening, if you activate a mailto link anywhere outside your e-mail client it will likely open up the web browser. That can be tested on any webpage, usually Contact Us, that happens to have a mailto: link. If people want to test using my webpage, britechguy.com, feel free to do so. The main page has the word, with hyphen, e-mail immediately followed with a mailto link for the same address I use to subscribe here. On systems where an email client is configured as the default email mechanism it should cause a compose window to open with my email address prepopulated in the To field. When I activate it myself, I'm getting a pop-up dialog from the browser saying that it wants to open eM Client and would I allow that, and I have eM Client configured as my default email client at the moment on this machine.

As to non-Groups.io lists, I agree a document would be handy, but that's outside of the scope of what I am discussing here. I'm sticking to how Groups.io works.

--


Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042

Always remember others may hate you but those who hate you don't win unless you hate them. And then you destroy yourself.

~ Richard M. Nixon


Re: On posting e-mail addresses in messages - Please don't #adminnotice

 

On Mon, Apr 19, 2021 at 01:23 PM, Gene wrote:
It looks as though when you follow the reply to sender link and you are using an e-mail program, that opens a browser
-
It shouldn't.  I'm not saying it doesn't, but that means something is configured wrong on the system in question.

The Reply to Sender link is a dirt common mailto: link.  Activating a mailto: link should cause the default e-mail mechanism, be it an email client or webmail if the "flow through" has been configured (and that's extra steps in many cases), to open and behave as I previously stated.  A web browser should not be opened unless the system in question has the default mail client set as a web browser.  If that's happening, if you activate a mailto link anywhere outside your e-mail client it will likely open up the web browser.  That can be tested on any webpage, usually Contact Us, that happens to have a mailto: link.  If people want to test using my webpage, britechguy.com, feel free to do so.  The main page has the word, with hyphen, e-mail immediately followed with a mailto link for the same address I use to subscribe here.  On systems where an email client is configured as the default email mechanism it should cause a compose window to open with my email address prepopulated in the To field.  When I activate it myself, I'm getting a pop-up dialog from the browser saying that it wants to open eM Client and would I allow that, and I have eM Client configured as my default email client at the moment on this machine.

As to non-Groups.io lists, I agree a document would be handy, but that's outside of the scope of what I am discussing here.  I'm sticking to how Groups.io works.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

Always remember others may hate you but those who hate you don't win unless you hate them.  And then you destroy yourself.

       ~ Richard M. Nixon

 


Re: On posting e-mail addresses in messages - Please don't #adminnotice

Gene
 

It looks as though when you follow the reply to sender link and you are using an e-mail program, that opens a browser. But in my case, it doesn't work properly for some reason. One of my browsers opens but it never displays the interface for sending a reply in the browser. I think that since most people use e-mail programs on the list, it is much better to learn how to reply to the sender using the e-mail program. Perhaps a document with instructions could be compiled for different popular e-mail programs such as for thunderbird, Outlook, and perhaps one or two others.
this is something I've encouraged people to learn and I believe I've posted some information about doing this in the past.

Also, since not all groups people may want to join are Groups.io groups, that's another reason to compile such a document.

Gene

-----Original Message-----
From: Brian Vogel
Sent: Monday, April 19, 2021 12:12 PM
To: nvda@nvda.groups.io
Subject: [nvda] On posting e-mail addresses in messages - Please don't #adminnotice

This is not "a group rule" but I'm posting about this because your own email address is something you don't want random bots that scour the net to be able to grab for phishing and other scamming purposes.

The NVDA Group archives are public, and, thus, not only indexed by search engines like Google, DuckDuckGo, StartPage, etc., but can also be crawled by any other individual or entity that wishes to do so. One of the most common ways to harvest email addresses is by crawling the web and looking for those posted out in the open, in all their glory. Even some of the older tricks like separating the first part of the address, at sign, and last part of the address cannot be ensured as being effective as the address is very simply reconstructed from same.

Every member can do as they see fit. I have generally "cleaned" messages of email addresses if I happen to read them shortly after they've been sent in hopes that the archive has not yet been crawled and the address harvested.

My recommendation on those occasions where you wish to be contacted off-group is to refer to the Reply to Sender link at the bottom of each message from Groups.io. Activating that should fire up your email mechanism of choice, be it an email client like Outlook or webmail, with the subject pre-populated with the prefix, Private:, followed by the topic title for the message itself and that message sender's email address in the To.

Your email address is not exposed using this method, as those links at the end of Groups.io messages that are automatically generated do not get saved in the archive. They're a part of individual email messages only.
--


Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042

Always remember others may hate you but those who hate you don't win unless you hate them. And then you destroy yourself.

~ Richard M. Nixon


Re: https://scribie.com/transcription-test#practice

Janet Brandly
 

Hello Brian,

 

Thank you very much for the input. Unfortunately, I live in Canada and this  company hires independent contractors, so there isn’t much I can do. I already have a foot pedal And was able to install it using the software they recommended. It would be interesting if someone from the US were to apply to work for them. At least you have the ADA and state legislation to back up any complaints. Transcription and editing, wither medical legal or general, is a field in which people who are blind could be successful; but, as long as barriers like this exist,

access to this field is limited.

 

Your time is appreciated,

 

Janet

From: Brian Vogel <britechguy@...>
Sent: April 19, 2021 9:56 AM
To: jbrandly@...
Cc: Luke Davis <luke@...>
Subject: Re: https://scribie.com/transcription-test#practice

 

Janet,

 

In addition to what Luke has mentioned there are other accessibility barriers on this page.  For instance, when I'm using Vivaldi (which is a Chromium-based browser) once I've tabbed into the transcription edit box I cannot get out of it via SHIFT+TAB nor trying to TAB to the next control.  There is a menu button above the transcription box that allows you to do things such as remapping the default shortcuts that Scribe uses (MS-Word document attached with all of them, taken from an option in that menu) that I cannot get to via NVDA, at the very least.  It also allows for a pedal setup if you happen to be someone who is already a transcriptionist and might have one at home already.

 

If they are monitoring every X seconds about activity in the edit box when doing a transcription, I honestly don't see how this test could be successfully taken by a screen reader user based on what they currently have there.  To my mind, it would definitely be worth pushing back with their support folks about lack of accessibility and reasonable accommodations for actually taking the test in an alternate form as a screen reader user.  There are just too many hoops that can't be jumped through.

 

The closest thing to a workaround I can think of, and it would be an awful one, would be to only have your browser open to that Scribie dictation item and another window open for MS-Word or similar and doing the transcription there, toggling back and forth between the two to pause audio as needed, but that would be sheer hell in terms of getting it to stop where and when you want it to.

 

I suspect that the transcription edit box is a very complex object that they have a lot of code associated with to monitor exactly what's being entered, how quickly, with how many corrections made, etc.  Even the line where you're typing changes background color, which is uncharacteristic of any typical edit box I've ever dealt with.

 

I'm sorry I cannot be of very much help to you on this.

 

Brian

 

On Thu, Apr 15, 2021 at 10:09 PM <jbrandly@...> wrote:

Hello Brian and Luke,

 

The link to the practice page of test files is https://scribie.com/transcription-test#practice

You will need to use either Firefox or Chrome. You will find a set of instructions with several practice files below that. When you choose a file and press the “select” button, the software/editor  loads automatically. The transcriptionist enters text into the edit field at the bottom. That’s where the problem is. I can type into the field okay, but cannot hear anything to read back or edit what I have written. Toggling in and out of  browse mode doesn’t help. Unfortunately, I cannot use the transcription editor alongside another program such as Word.

 

Thank you for your help with this,

 

Janet


 

--

Bri the Tech Guy          http://britechguy.com
britechguy@...            phone/text:  (540) 324-5032                       

"If it's got you screaming, I'll help you stop!!"


On posting e-mail addresses in messages - Please don't #adminnotice

 

This is not "a group rule" but I'm posting about this because your own email address is something you don't want random bots that scour the net to be able to grab for phishing and other scamming purposes.

The NVDA Group archives are public, and, thus, not only indexed by search engines like Google, DuckDuckGo, StartPage, etc., but can also be crawled by any other individual or entity that wishes to do so.  One of the most common ways to harvest email addresses is by crawling the web and looking for those posted out in the open, in all their glory.  Even some of the older tricks like separating the first part of the address, at sign, and last part of the address cannot be ensured as being effective as the address is very simply reconstructed from same.

Every member can do as they see fit.  I have generally "cleaned" messages of email addresses if I happen to read them shortly after they've been sent in hopes that the archive has not yet been crawled and the address harvested.

My recommendation on those occasions where you wish to be contacted off-group is to refer to the Reply to Sender link at the bottom of each message from Groups.io.  Activating that should fire up your email mechanism of choice, be it an email client like Outlook or webmail, with the subject pre-populated with the prefix, Private:, followed by the topic title for the message itself and that message sender's email address in the To.  

Your email address is not exposed using this method, as those links at the end of Groups.io messages that are automatically generated do not get saved in the archive.  They're a part of individual email messages only.
--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

Always remember others may hate you but those who hate you don't win unless you hate them.  And then you destroy yourself.

       ~ Richard M. Nixon

 


Re: stream pc audio with nvda remote?

Vinod Benjamin
 

Dear Luke,

Thanks for the extensive reply, let me try.

Regards,
Vinod Benjamin

On 4/19/21, Luke Davis <luke@newanswertech.com> wrote:
There used to be software called Airfoil, that sent audio from one computer
to
any others. However it has been discontinued.

The spiritual successor seems to be this:
https://www.stardock.com/products/acousticbridge/
And before you ask: I don't know if it's accessible.

As for more DIY answers.

Doing this kind of thing was much more popular 10-15 years ago it seems.
Most of the solutions out there speak of Win 7, vista, or 98. Most software
for
doing it has gone away now, or can only be found in very old versions.

Pulseaudio can do this, but God bless you and help you if you decide to
spend
time working with Pulseaudio. Even I won't go near that one any more.

There are several possible solutions here:
https://sound.stackexchange.com/questions/22921/stream-windows-audio-over-the-network

The best one seems to be the Edcast -> Icecast answer, but even Edcast is
only
available in the Google Code Vault.

Another (partial) option might be this software here:
https://github.com/duncanthrax/scream

It claims to only work on the local network, but if you are clever with
networking and such you might be able to convince it to work over a point to

point VPN or something like that.

Were I to try this, I would probably use FFMpeg to pick up the local PCM
stream,
convert it to MP3 or OGG, pipe that into a local icecast server, and have
your
remote machine listen to that compressed stream.
Alternatively, you might be able to do something with VLC, but I'm no
expert.

There are recipes out there for going from Linux to Windows via FFMPeg and
FFPlay. I'm sure you could adapt those for Windows-to-Windows, using the
loopback sound driver that Windows has.

Good luck.

--
Luke

"In this life there are obstacles, and forces who overcome obstacles. You
can be either one or the other.
If you refuse to even try to clear an obstacle, you become the obstacle."
- Joel Shepherd






NVDA screen reader user and Lichess user

anthony borg
 
Edited

Hi list

 

I’m looking for somebody who is an NVDA screen reader user and a Lichess user as well to be able to guide me with certain things please.

You can contact me directly using the Reply to Sender link at the end of this message.

Thanks in advance

 

Anthony

 


Re: stream pc audio with nvda remote?

Luke Davis
 

There used to be software called Airfoil, that sent audio from one computer to any others. However it has been discontinued.

The spiritual successor seems to be this: https://www.stardock.com/products/acousticbridge/
And before you ask: I don't know if it's accessible.

As for more DIY answers.

Doing this kind of thing was much more popular 10-15 years ago it seems.
Most of the solutions out there speak of Win 7, vista, or 98. Most software for doing it has gone away now, or can only be found in very old versions.

Pulseaudio can do this, but God bless you and help you if you decide to spend time working with Pulseaudio. Even I won't go near that one any more.

There are several possible solutions here:
https://sound.stackexchange.com/questions/22921/stream-windows-audio-over-the-network

The best one seems to be the Edcast -> Icecast answer, but even Edcast is only available in the Google Code Vault.

Another (partial) option might be this software here:
https://github.com/duncanthrax/scream

It claims to only work on the local network, but if you are clever with networking and such you might be able to convince it to work over a point to point VPN or something like that.

Were I to try this, I would probably use FFMpeg to pick up the local PCM stream, convert it to MP3 or OGG, pipe that into a local icecast server, and have your remote machine listen to that compressed stream.
Alternatively, you might be able to do something with VLC, but I'm no expert.

There are recipes out there for going from Linux to Windows via FFMPeg and FFPlay. I'm sure you could adapt those for Windows-to-Windows, using the loopback sound driver that Windows has.

Good luck.

--
Luke

"In this life there are obstacles, and forces who overcome obstacles. You can be either one or the other.
If you refuse to even try to clear an obstacle, you become the obstacle."
- Joel Shepherd


I would like to give praise to the developers of the NVDA remote addon. It has been a real help to me. Because of it I have beeen able to control my pc at home while away visiting my mother in Missouri.

Robert Doc Wright godfearer
 

 
*********
family Times weekly Movie times
 

go to Doc's Stream
http://stream.wrighthere.net:8000/stream.mp3
Ask Miss A to play family times on tuneIn
You can also find family times on OoTunes.
 
 

walking in VictoryI welcome all that are interested in joining our devotionals on Monday thru saturdays at 8am EST. join the devotion channel.
Also, there is a weekly bible study at 8pm EST in the Walking with Jesus channel.
 

Add the following information in your TeamTalk
host address: wiv.wrighthere.net
TCP/UDP ports: 10333
 
entry name: walking in Victory
tab twice and press space on Add/update
 


Re: stream pc audio with nvda remote?

Russell James
 

Team Viewer is another alternative to provide remote access
I'm not a user but I know blind users that have said they use it...

Some businesses don't allow Team Viewer so you may need to check with the IT department...

However, if you are using Windows on both computers you can use Microsoft Remote Desktop for free.
It can be configured to share audio and devices and the clipboard between computers.
Therefore, if NVDA is running on the remote computer you can hear it on the local computer.

Russ


On Sun, Apr 18, 2021 at 1:55 PM Vinod Benjamin <vinbenji.group@...> wrote:
dear all,

Is Team Viewer is accessible friendly. with NVDA.
and i am looking some thing like JAWS Tandam ,
also NVDA Remote is very Lite.

Regards.

Vinod Benjamin

On 4/18/21, Carlos Esteban Martínez Macías via groups.io
<cesteban.martinez=nvda.es@groups.io> wrote:
> Hi all.
> NVDA Remote only send the text that NVDA speak and show in a Braille
> Display, and sound events of NVDA. For the sound or other applications, you
> can use Team Viewer, for example.
> Regards.
>
> --
>
> Músico (pianista) y ayuda a usuarios ciegos y con discapacidad visual en el
> uso de lectores de pantalla y tecnología. Experto certificado en el lector
> de pantalla NVDA.
>
> Musician (pianist) and help to the blind people and with visual disability
> in use of screen readers and technology. Certified expert in the screen
> reader NVDA.
>
>
>
>
>
>






Re: stream pc audio with nvda remote?

Vinod Benjamin
 

dear all,

Is Team Viewer is accessible friendly. with NVDA.
and i am looking some thing like JAWS Tandam ,
also NVDA Remote is very Lite.

Regards.

Vinod Benjamin

On 4/18/21, Carlos Esteban Martínez Macías via groups.io
<cesteban.martinez=nvda.es@groups.io> wrote:
Hi all.
NVDA Remote only send the text that NVDA speak and show in a Braille
Display, and sound events of NVDA. For the sound or other applications, you
can use Team Viewer, for example.
Regards.

--

Músico (pianista) y ayuda a usuarios ciegos y con discapacidad visual en el
uso de lectores de pantalla y tecnología. Experto certificado en el lector
de pantalla NVDA.

Musician (pianist) and help to the blind people and with visual disability
in use of screen readers and technology. Certified expert in the screen
reader NVDA.






Re: stream pc audio with nvda remote?

Carlos Esteban Martínez Macías
 

Hi all.
NVDA Remote only send the text that NVDA speak and show in a Braille Display, and sound events of NVDA. For the sound or other applications, you can use Team Viewer, for example.
Regards.

--

Músico (pianista) y ayuda a usuarios ciegos y con discapacidad visual en el uso de lectores de pantalla y tecnología. Experto certificado en el lector de pantalla NVDA.

Musician (pianist) and help to the blind people and with visual disability in use of screen readers and technology. Certified expert in the screen reader NVDA.


Re: stream pc audio with nvda remote?

Vinod Benjamin
 

dear all,
is remote desktop is accessible friendly while i connect with NVDA Remote?

Regards,

Vinod Benjamin

On 4/18/21, Russell James <4rjames@gmail.com> wrote:
If both computers are running Windows you can use remote desktop to access
the other computer and it supports audio tunnel through that connection

Russ

On Sun, Apr 18, 2021, 5:58 AM mslion <brailletijger@gmail.com> wrote:

dear all,
I am currently using nvda remote across the internet with a direct
connection to a virtual machine.
I am wandering however, is it also possible either via nvda remote or
other program to stream other sound of the pc?
Tnx for the tips.

With kind regards,
Mitchel Snel









Re: stream pc audio with nvda remote?

Russell James
 

If both computers are running Windows you can use remote desktop to access the other computer and it supports audio tunnel through that connection

Russ


On Sun, Apr 18, 2021, 5:58 AM mslion <brailletijger@...> wrote:
dear all,
I am currently using nvda remote across the internet with a direct connection to a virtual machine.
I am wandering however, is it also possible either via nvda remote or other program to stream other sound of the pc?
Tnx for the tips.

With kind regards,
Mitchel Snel




3421 - 3440 of 86624