Date   

Re: Release Candidate 2 for NVDA 2018.4 is available

Fernando Paixão
 

good day,
I would like to know what has changed in this version?


Em 14/12/2018 03:30, Quentin Christensen escreveu:
Great to hear!

All the best,

Quentin.

On Fri, Dec 14, 2018 at 4:14 PM Rosemarie Chavarria <knitqueen2007@...> wrote:

Hi, Quentin,


I just turned on my computer and saw the update and grabbed it. So-far it's working great for me.


Rosemarie



On 12/13/2018 9:11 PM, Quentin Christensen wrote:
Hi everyone,

NVDA 2018.4 rc2 is now available.  We encourage you to download the beta and provide feedback. This is a release candidate, meaning that unless any critical bugs are found, this will be identical to the final 2018.4 release.

https://www.nvaccess.org/post/nvda-2018-4rc2-released/

Kind regards

Quentin.
--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 



--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 

-- 

Enviado via Mozilla Thunderbird 
com Windows 10


Re: ccleaner new version

 

The real pitty with the ccleaner program bar the interfaces and settings issues is that if there was a way to run the engine without it being bogged down by the size of its ini file or in fact now many entries it has even if it has to use a bit more power for it on newer systems, or can be customised to whatever, it could leave disk cleaner in fact any cleaning solution for dead.

On 12/14/2018 4:03 PM, Richard Wells wrote:
Shaun: I got both of them just fine and I will be checking this out. Thank you for your work.

On 12/13/2018 8:01 PM, Shaun Everiss wrote:
the latest ccleaner portable is.


https://www.ccleaner.com/ccleaner/download/portable

Its always been that way.

the ccleaner dropbox link for the ini version is at.

https://www.dropbox.com/s/kbbbqs8blbyuev9/ccleaner.ini?dl=1

Well advantages are bug fixes mainly.

To be honest though if you don't actually care, versions of ccleaner 3.00-3.31 are probably safe versions.

3.1 versions are fine, 3.2 versions are ok and 3.3 versions excluding 3.33, 3.34 and3.35 as one ofthose was hacked.

Sadly, 3.4 is where the avast stuff comes into it, in fact any version of ccleaner before avast got piriform is fine.

After that, if you can get the last version from 2017, then thats fine.

I like disk cleanup but to be honest, I don't need to use it all the time, disk cleanup's advantage is it clears a lot of things, its major drawback is its really slow especially on hard drives and slower processers with little memmory to speak of.

CCleaner cleans the most commen junk things, mainly temp and temp internet files.

Its disadvantage or rather main disadvantage is that if the ini file gets big enough it will slow down a load but it could actually potentially clean more than disk cleanup as you could clean vertually anything.

Right now, the following extra disadvantages exist.

1.  quickclean, it appears that to turn this on and off is basically impossible from settings and if you do it manually in the ini, every time it runs and checks for updates it will toggle things back on.

2.  avast is in the installer, and other unwanted stuff, as well as this, due to it running monitering and other things at startup the installer is not trustable pluss the main interface is not accessable checkbox wize.

However, in most cases I don't often run disk cleanup for every day use, I have not tried to use windows storage sence and maybe thats fine but I like to have some control but whatever you want.



On 12/14/2018 7:14 AM, Roger Stewart wrote:
Can you please give the link for the latest portable version and the latest .ini file?  Sad to report the link you gave for the direct portable version download has switched to the main installer for cCleaner and the portable version doesn't even show on that page now. I've deleted that old link so we will all need a new one. Anyhow, what is the advantage of using the latest and greatest version anyhow?  I ran the old one I have and it seemed to work just fine here.  I also find that the built in disk cleanup utility can free many times the space as CCleaner but it will still get some things the disk cleanup can't get so I need to use both of them. CCleaner removed just over a half GB of junk while the disk cleanup got rid of a bit over 9 GB of unnecessary stuff!

Roger










On 12/13/2018 11:59 AM, Shaun Everiss wrote:
Hi all.

A small note to all of you, although there is a new version of this out, there are no settings of note updated in the ini file, so I'm not uploading one











Re: Release Candidate 2 for NVDA 2018.4 is available

Quentin Christensen
 

Great to hear!

All the best,

Quentin.

On Fri, Dec 14, 2018 at 4:14 PM Rosemarie Chavarria <knitqueen2007@...> wrote:

Hi, Quentin,


I just turned on my computer and saw the update and grabbed it. So-far it's working great for me.


Rosemarie



On 12/13/2018 9:11 PM, Quentin Christensen wrote:
Hi everyone,

NVDA 2018.4 rc2 is now available.  We encourage you to download the beta and provide feedback. This is a release candidate, meaning that unless any critical bugs are found, this will be identical to the final 2018.4 release.

https://www.nvaccess.org/post/nvda-2018-4rc2-released/

Kind regards

Quentin.
--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 



--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


Re: Release Candidate 2 for NVDA 2018.4 is available

Rosemarie Chavarria
 

Hi, Quentin,


I just turned on my computer and saw the update and grabbed it. So-far it's working great for me.


Rosemarie



On 12/13/2018 9:11 PM, Quentin Christensen wrote:
Hi everyone,

NVDA 2018.4 rc2 is now available.  We encourage you to download the beta and provide feedback. This is a release candidate, meaning that unless any critical bugs are found, this will be identical to the final 2018.4 release.

https://www.nvaccess.org/post/nvda-2018-4rc2-released/

Kind regards

Quentin.
--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


Release Candidate 2 for NVDA 2018.4 is available

Quentin Christensen
 

Hi everyone,

NVDA 2018.4 rc2 is now available.  We encourage you to download the beta and provide feedback. This is a release candidate, meaning that unless any critical bugs are found, this will be identical to the final 2018.4 release.

https://www.nvaccess.org/post/nvda-2018-4rc2-released/

Kind regards

Quentin.
--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


Re: NVDA 2018-4 RC1

Gene
 

I don't know how the interface may have changed in recent versions but there used to be a setting for not showing layout tables.  Before changing a general setting such as table information, check that NVDA is set not to show layout tables.
 
Gene

----- Original Message -----
Sent: Thursday, December 13, 2018 7:25 PM
Subject: Re: [nvda] NVDA 2018-4 RC1

Hi


Have a look under document settings in nvda and uncheck the box called table information.


hopefully that will do the trick for you.


Gene nz


On 14/12/2018 2:20 PM, Don H wrote:
Running NVDA RC1 on a win 10 1809 system using google chrome as my browser.  When I open Google Chrome NVDA announces row 1 column 1.  I may be all wet but don't remember NVDA saying this before when openning Google Chrome.  Is there a way to stop this announcement?
Thanks




--
Check out my website for NVDA tutorials and other blindness related material at http://www.accessibilitycentral.net Regardless of where you are in New Zealand if you are near one of the APNK sites you can use a copy of the NVDA screen reader on one of their computers. To find out which locations (or location) is near to you please visit http://www.aotearoapeoplesnetwork.org/content/partner-libraries (Aotearoa People's Network Kaharoa). To find an NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.


Re: Tifkitecnia Demos

Mohith BP
 

Is there a audio / video of the voices?

On 12/14/18, prem.translator@gmail.com <prem.translator@gmail.com> wrote:
Totally agree with Richard Wells. For now, vocalizer from Tiflotecnia works
well with NVDA and their customer service is excellent. The team always
assists me whenever I faced any problems, like the last case I posted in the
list, I contacted the team off list, and they help me until the problem is
solved.




Re: NVDA 2018-4 RC1

hurrikennyandopo ...
 

Hi


by the way nvda 2018.4 rc2 has been released. I got it earlier on today.

Gene nz


On 14/12/2018 3:30 PM, Don H wrote:
That fixed it.  The confusion I have is thinking that such a setting would be under browse mode  rather than documents.

On 12/13/2018 7:25 PM, hurrikennyandopo ... wrote:
Hi


Have a look under document settings in nvda and uncheck the box called table information.


hopefully that will do the trick for you.


Gene nz


On 14/12/2018 2:20 PM, Don H wrote:
Running NVDA RC1 on a win 10 1809 system using google chrome as my browser.  When I open Google Chrome NVDA announces row 1 column 1.  I may be all wet but don't remember NVDA saying this before when openning Google Chrome.  Is there a way to stop this announcement?
Thanks




-- 
Image NVDA certified expert
Check out my website for NVDA tutorials and other blindness related material at http://www.accessibilitycentral.net Regardless of where you are in New Zealand if you are near one of the APNK sites you can use a copy of the NVDA screen reader on one of their computers. To find out which locations (or location) is near to you please visit http://www.aotearoapeoplesnetwork.org/content/partner-libraries (Aotearoa People's Network Kaharoa). To find an NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.





--
Check out my website for NVDA tutorials and other blindness related material at http://www.accessibilitycentral.net Regardless of where you are in New Zealand if you are near one of the APNK sites you can use a copy of the NVDA screen reader on one of their computers. To find out which locations (or location) is near to you please visit http://www.aotearoapeoplesnetwork.org/content/partner-libraries (Aotearoa People's Network Kaharoa). To find an NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.


Re: Tifkitecnia Demos

prem.translator@...
 

Totally agree with Richard Wells. For now, vocalizer from Tiflotecnia works well with NVDA and their customer service is excellent. The team always assists me whenever I faced any problems, like the last case I posted in the list, I contacted the team off list, and they help me until the problem is solved. 


Re: question about nvda add ons

 

hi gene.
thanks so much for your link.
it helped me a lot for better understanding nvda and its difference
and similarities with jaws.
thanks extremely for your help, God bless you!

On 12/14/18, hurrikennyandopo ... <hurrikennyandopo@hotmail.com> wrote:
Hi


the following link may help you on questions that jaws users may ask when
they take nvda for a test drive etc. the following link should help you you
can jump down to the area about scripts or known as add ons with nvda but
the rest of it you should find interesting.


The link to this page is
https://github.com/nvaccess/nvda-community/wiki/SwitchingFromJawsToNVDA

hopefully it helps you.


gene nz


On 14/12/2018 9:15 AM, molly the blind tech lover wrote:

Hey guys? I keep trying to reply to your responses to my question, but my
Internet keeps going out. Darn Comcast. I'm sending this before the Internet
goes out... again.

-----Original Message-----
From: nvda@nvda.groups.io<mailto:nvda@nvda.groups.io>
<nvda@nvda.groups.io><mailto:nvda@nvda.groups.io> On Behalf Of Arlene
Sent: Thursday, December 13, 2018 2:33 PM
To: nvda@nvda.groups.io<mailto:nvda@nvda.groups.io>
Subject: Re: [nvda] question about nvda add ons

Yes Molly, NVDA addons are like Jaws scripts. You add them as you see fit.

On 12/13/18, molly the blind tech lover
<brainardmolly@gmail.com><mailto:brainardmolly@gmail.com> wrote:


Hey guys, Molly here again.

I was just wondering, is an NVDA add on the equivalent of jaws
scripts? I realize that add ons enhance the functionality of NVDA.
Isn't that similar to Jaws scripting? Or am I way off base here?

Thanks.
















--
[Image NVDA certified expert]
Check out my website for NVDA tutorials and other blindness related material
at http://www.accessibilitycentral.net Regardless of where you are in New
Zealand if you are near one of the APNK sites you can use a copy of the NVDA
screen reader on one of their computers. To find out which locations (or
location) is near to you please visit
http://www.aotearoapeoplesnetwork.org/content/partner-libraries (Aotearoa
People's Network Kaharoa). To find an NVDA certified expert near you, please
visit the following link https://certification.nvaccess.org/. The
certification page contains the official list of NVDA certified individuals
from around the world, who have sat and successfully passed the NVDA expert
exam.



--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali


Re: ccleaner new version

Richard Wells
 

Shaun: I got both of them just fine and I will be checking this out. Thank you for your work.

On 12/13/2018 8:01 PM, Shaun Everiss wrote:
the latest ccleaner portable is.


https://www.ccleaner.com/ccleaner/download/portable

Its always been that way.

the ccleaner dropbox link for the ini version is at.

https://www.dropbox.com/s/kbbbqs8blbyuev9/ccleaner.ini?dl=1

Well advantages are bug fixes mainly.

To be honest though if you don't actually care, versions of ccleaner 3.00-3.31 are probably safe versions.

3.1 versions are fine, 3.2 versions are ok and 3.3 versions excluding 3.33, 3.34 and3.35 as one ofthose was hacked.

Sadly, 3.4 is where the avast stuff comes into it, in fact any version of ccleaner before avast got piriform is fine.

After that, if you can get the last version from 2017, then thats fine.

I like disk cleanup but to be honest, I don't need to use it all the time, disk cleanup's advantage is it clears a lot of things, its major drawback is its really slow especially on hard drives and slower processers with little memmory to speak of.

CCleaner cleans the most commen junk things, mainly temp and temp internet files.

Its disadvantage or rather main disadvantage is that if the ini file gets big enough it will slow down a load but it could actually potentially clean more than disk cleanup as you could clean vertually anything.

Right now, the following extra disadvantages exist.

1.  quickclean, it appears that to turn this on and off is basically impossible from settings and if you do it manually in the ini, every time it runs and checks for updates it will toggle things back on.

2.  avast is in the installer, and other unwanted stuff, as well as this, due to it running monitering and other things at startup the installer is not trustable pluss the main interface is not accessable checkbox wize.

However, in most cases I don't often run disk cleanup for every day use, I have not tried to use windows storage sence and maybe thats fine but I like to have some control but whatever you want.



On 12/14/2018 7:14 AM, Roger Stewart wrote:
Can you please give the link for the latest portable version and the latest .ini file?  Sad to report the link you gave for the direct portable version download has switched to the main installer for cCleaner and the portable version doesn't even show on that page now. I've deleted that old link so we will all need a new one. Anyhow, what is the advantage of using the latest and greatest version anyhow?  I ran the old one I have and it seemed to work just fine here.  I also find that the built in disk cleanup utility can free many times the space as CCleaner but it will still get some things the disk cleanup can't get so I need to use both of them. CCleaner removed just over a half GB of junk while the disk cleanup got rid of a bit over 9 GB of unnecessary stuff!

Roger










On 12/13/2018 11:59 AM, Shaun Everiss wrote:
Hi all.

A small note to all of you, although there is a new version of this out, there are no settings of note updated in the ini file, so I'm not uploading one









Re: Tifkitecnia Demos

Richard Wells
 

I have to say that I just purchased both old and new Vocalizer Nuance products from Tiflotecnia and they work well with NVDA. Customer service was excellent and all my questions were answered promptly. These kinds of one-sided discussions make me wonder why anybody tries to do business at all on the Internet. Thanks Rui for all you do!

On 12/13/2018 3:48 PM, Lino Morales wrote:

No they are not and as Nimer Jabar has stated I wouldn’t trust this company period!

 

Sent from Mail for Windows 10

 


From: nvda@nvda.groups.io <nvda@nvda.groups.io> on behalf of Bobby Vinton <vinton.bobby5277@...>
Sent: Thursday, December 13, 2018 4:38:58 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Tifkitecnia Demos
 

Hay I was wondering if nathin an the newest voices are in this update

 

Sent from Mail for Windows 10

 

From: Rui Fontes
Sent: Thursday, December 13, 2018 4:33 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Tifkitecnia Demos

 

At the begin, Nuance did not allow us to make a demo license...

So, we have put the scheme of the driiver be valid during a certain

number of days... But, that implies that we have to release new drivers

regularly...

 

In the last two years, or so, we decided to do not have demos...

 

In the next version we will have again a 15 days demo automatically...

 

Best regards,

 

Rui Fontes

Tiflotecnia, Lda.

 

 

Às 21:23 de 13/12/2018, Gene escreveu:

> It's unfortunate that the same absurd demo system is still being used

> years after I encountered it.  A demo is released that won't run after a

> certain date.  Whether a new demo is released before an updated driver

> comes out is something I don't know.  But this is absurd.  Why can't

> demos time out after a certain number of days or hours of use or

> something that makes the demo available in a way that people can use it

> when they want to consider the program, not only before a certain date.

> Can the company change this or is this something imposed by the product

> manufacturer?

> Gene

> ----- Original Message -----

> *From:* Earle Zwicker <mailto:rowdyamerican@...>

> *Sent:* Thursday, December 13, 2018 2:59 PM

> *To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>

> *Subject:* [nvda] Tifkitecnia Demos

>

> Just wondering if Tiflotecnia offers demos of their Vocalizer add-on? I

> went to their download page and downloaded the latest driver and a

> bundle of English compact voices. I installed them and got a message

> that the demo was expired. Am I doing something wrong, or is there no

> demo available.

>

> Earle

>

>

>

 

 

 


Re: NVDA 2018-4 RC1

Don H
 

That fixed it. The confusion I have is thinking that such a setting would be under browse mode rather than documents.

On 12/13/2018 7:25 PM, hurrikennyandopo ... wrote:
Hi
Have a look under document settings in nvda and uncheck the box called table information.
hopefully that will do the trick for you.
Gene nz
On 14/12/2018 2:20 PM, Don H wrote:
Running NVDA RC1 on a win 10 1809 system using google chrome as my browser.  When I open Google Chrome NVDA announces row 1 column 1.  I may be all wet but don't remember NVDA saying this before when openning Google Chrome.  Is there a way to stop this announcement?
Thanks



--
Image NVDA certified expert
Check out my website for NVDA tutorials and other blindness related material at http://www.accessibilitycentral.net Regardless of where you are in New Zealand if you are near one of the APNK sites you can use a copy of the NVDA screen reader on one of their computers. To find out which locations (or location) is near to you please visit http://www.aotearoapeoplesnetwork.org/content/partner-libraries (Aotearoa People's Network Kaharoa). To find an NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.


Audio Issues

Ralph Boersema
 

Dear Friends,

May I ask for your input on this, once again. I am running Windows 10 and have two audio options: a Realtek sound card and a Logitech wireless headset (not Bluetooth). Under the NVDA speech settings, when I choose one of these, the output is through the other one. I want the Logitech wireless headset, but have to choose Realtek to get it. However, the NVDA sounds do not have the same good voice quality as when I used to set it to come through the Logitech option. Especially, the initial sound in each word is often cut off. Selecting the Realtek option, NVDA sounds come through the Logitech headset, but system sounds come through the computer speakers.

When I raised these issues three weeks ago, several of you suggested this would be a driver problem. I checked the settings and drivers, together with my sighted wife and we found no irregularity. I had another person, who is more computer savvy, look at this and he, too, said that there was no evidence of errors with either the Realtek driver or the Logitech driver.

Is it possible to have a driver problem, even though there is no error alert?

Any other suggestions?

Warmly,
Ralph


Re: ccleaner new version

 

the latest ccleaner portable is.


https://www.ccleaner.com/ccleaner/download/portable

Its always been that way.

the ccleaner dropbox link for the ini version is at.

https://www.dropbox.com/s/kbbbqs8blbyuev9/ccleaner.ini?dl=1

Well advantages are bug fixes mainly.

To be honest though if you don't actually care, versions of ccleaner 3.00-3.31 are probably safe versions.

3.1 versions are fine, 3.2 versions are ok and 3.3 versions excluding 3.33, 3.34 and3.35 as one ofthose was hacked.

Sadly, 3.4 is where the avast stuff comes into it, in fact any version of ccleaner before avast got piriform is fine.

After that, if you can get the last version from 2017, then thats fine.

I like disk cleanup but to be honest, I don't need to use it all the time, disk cleanup's advantage is it clears a lot of things, its major drawback is its really slow especially on hard drives and slower processers with little memmory to speak of.

CCleaner cleans the most commen junk things, mainly temp and temp internet files.

Its disadvantage or rather main disadvantage is that if the ini file gets big enough it will slow down a load but it could actually potentially clean more than disk cleanup as you could clean vertually anything.

Right now, the following extra disadvantages exist.

1.  quickclean, it appears that to turn this on and off is basically impossible from settings and if you do it manually in the ini, every time it runs and checks for updates it will toggle things back on.

2.  avast is in the installer, and other unwanted stuff, as well as this, due to it running monitering and other things at startup the installer is not trustable pluss the main interface is not accessable checkbox wize.

However, in most cases I don't often run disk cleanup for every day use, I have not tried to use windows storage sence and maybe thats fine but I like to have some control but whatever you want.

On 12/14/2018 7:14 AM, Roger Stewart wrote:
Can you please give the link for the latest portable version and the latest .ini file?  Sad to report the link you gave for the direct portable version download has switched to the main installer for cCleaner and the portable version doesn't even show on that page now. I've deleted that old link so we will all need a new one. Anyhow, what is the advantage of using the latest and greatest version anyhow?  I ran the old one I have and it seemed to work just fine here.  I also find that the built in disk cleanup utility can free many times the space as CCleaner but it will still get some things the disk cleanup can't get so I need to use both of them.  CCleaner removed just over a half GB of junk while the disk cleanup got rid of a bit over 9 GB of unnecessary stuff!

Roger










On 12/13/2018 11:59 AM, Shaun Everiss wrote:
Hi all.

A small note to all of you, although there is a new version of this out, there are no settings of note updated in the ini file, so I'm not uploading one








Re: NVDA 2018-4 RC1

Don H
 

it is loading the default google search page.

On 12/13/2018 7:24 PM, Quentin Christensen wrote:
What page is Chrome loading on startup?  Maybe it's loading something with a table?
On Fri, Dec 14, 2018 at 12:21 PM Don H <lmddh50@adams.net <mailto:lmddh50@adams.net>> wrote:
Running NVDA RC1 on a win 10 1809 system using google chrome as my
browser.  When I open Google Chrome NVDA announces row 1 column 1.  I
may be all wet but don't remember NVDA saying this before when openning
Google Chrome.  Is there a way to stop this announcement?
Thanks
--
Quentin Christensen
Training and Support Manager
Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/
www.nvaccess.org <http://www.nvaccess.org/>
Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess


Re: NVDA 2018-4 RC1

hurrikennyandopo ...
 

Hi


Have a look under document settings in nvda and uncheck the box called table information.


hopefully that will do the trick for you.


Gene nz


On 14/12/2018 2:20 PM, Don H wrote:
Running NVDA RC1 on a win 10 1809 system using google chrome as my browser.  When I open Google Chrome NVDA announces row 1 column 1.  I may be all wet but don't remember NVDA saying this before when openning Google Chrome.  Is there a way to stop this announcement?
Thanks




--
Check out my website for NVDA tutorials and other blindness related material at http://www.accessibilitycentral.net Regardless of where you are in New Zealand if you are near one of the APNK sites you can use a copy of the NVDA screen reader on one of their computers. To find out which locations (or location) is near to you please visit http://www.aotearoapeoplesnetwork.org/content/partner-libraries (Aotearoa People's Network Kaharoa). To find an NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.


Re: NVDA 2018-4 RC1

Quentin Christensen
 

What page is Chrome loading on startup?  Maybe it's loading something with a table?


On Fri, Dec 14, 2018 at 12:21 PM Don H <lmddh50@...> wrote:
Running NVDA RC1 on a win 10 1809 system using google chrome as my
browser.  When I open Google Chrome NVDA announces row 1 column 1.  I
may be all wet but don't remember NVDA saying this before when openning
Google Chrome.  Is there a way to stop this announcement?
Thanks






--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


NVDA 2018-4 RC1

Don H
 

Running NVDA RC1 on a win 10 1809 system using google chrome as my browser. When I open Google Chrome NVDA announces row 1 column 1. I may be all wet but don't remember NVDA saying this before when openning Google Chrome. Is there a way to stop this announcement?
Thanks


Re: move configuration

David Moore
 

Hi!

When you make a portable copy to save on the drive, it asks you if you want to save all of your information, settings and all. Everything will be saved in the portable copy you create on a back up system. That is the best way to put it on another computer. Just make a portable copy, and install it on other computers.

David Moore

 

                                                                                                                                                                                                                Sent from Mail for Windows 10

 

From: Don H
Sent: Thursday, December 13, 2018 6:22 PM
To: nvda@nvda.groups.io
Subject: [nvda] move configuration

 

How do you move your saved NVDA configuration to another computer or to

a backup drive?

Thanks