Date   

Re: Station playlist

 

Hi,

Go to community add-ons website, select StationPlaylist, and download the development version. Also, subscribe to NvDA-SPL list located at:

https://nvda-spl.groups.io/g/nvda-spl

Usually I do not announce development build announcements on this list so folks will not be overwhelmed. Note that these development builds are really bleeding-edge builds, sometimes requiring most recent NVDA stable version (or in some cases, beta or even alpha releases). I’ll make an important announcement about development builds as part of an upcoming SPL add-on release announcement.

Cheers,

Joseph

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Afik Souffir
Sent: Friday, September 25, 2020 11:23 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Station playlist

 

 

How can I test the add on?

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: Friday, September 25, 2020 9:20 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Station playlist

 

Hi,

To name an encoder, when an encoder is focused, press Alt+NVDA+0 to open encoder settings dialog for the selected encoder. The first option will be “encoder label” and you can use this field to label your encoder whatever you like. To remove an encoder label, go to the encoder with the label you wish to delete, press Alt+NVDA+0, then delete whatever is shown on “encoder label” field.

In the past an encoder labeler command was provided (F12) to open a dialog dedicated to labeling encoders. This was removed in a recent add-on release. F12 command is coming back this November to open encoder settings dialog (currently being tested by our testers).

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Robert Doc Wright godfearer
Sent: Friday, September 25, 2020 11:14 AM
To: nvda@nvda.groups.io
Subject: [nvda] Station playlist

 

how do you name an encoder using NVDA?

******
If we can't look at ourselves, and ask, why?  then where does the learning start?

 

Family times where there is fun for every ear!
http://stream.wrighthere.net:8000/stream.mp3

 

Or ask your A device to play Family times on tuneIn
You can also find us on your mobile device install OoTunes and search for Family times


Re: Station playlist

Afik Souffir
 

 

How can I test the add on?

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: Friday, September 25, 2020 9:20 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Station playlist

 

Hi,

To name an encoder, when an encoder is focused, press Alt+NVDA+0 to open encoder settings dialog for the selected encoder. The first option will be “encoder label” and you can use this field to label your encoder whatever you like. To remove an encoder label, go to the encoder with the label you wish to delete, press Alt+NVDA+0, then delete whatever is shown on “encoder label” field.

In the past an encoder labeler command was provided (F12) to open a dialog dedicated to labeling encoders. This was removed in a recent add-on release. F12 command is coming back this November to open encoder settings dialog (currently being tested by our testers).

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Robert Doc Wright godfearer
Sent: Friday, September 25, 2020 11:14 AM
To: nvda@nvda.groups.io
Subject: [nvda] Station playlist

 

how do you name an encoder using NVDA?

******
If we can't look at ourselves, and ask, why?  then where does the learning start?

 

Family times where there is fun for every ear!
http://stream.wrighthere.net:8000/stream.mp3

 

Or ask your A device to play Family times on tuneIn
You can also find us on your mobile device install OoTunes and search for Family times


Re: Station playlist

 

Hi,

To name an encoder, when an encoder is focused, press Alt+NVDA+0 to open encoder settings dialog for the selected encoder. The first option will be “encoder label” and you can use this field to label your encoder whatever you like. To remove an encoder label, go to the encoder with the label you wish to delete, press Alt+NVDA+0, then delete whatever is shown on “encoder label” field.

In the past an encoder labeler command was provided (F12) to open a dialog dedicated to labeling encoders. This was removed in a recent add-on release. F12 command is coming back this November to open encoder settings dialog (currently being tested by our testers).

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Robert Doc Wright godfearer
Sent: Friday, September 25, 2020 11:14 AM
To: nvda@nvda.groups.io
Subject: [nvda] Station playlist

 

how do you name an encoder using NVDA?

******
If we can't look at ourselves, and ask, why?  then where does the learning start?

 

Family times where there is fun for every ear!
http://stream.wrighthere.net:8000/stream.mp3

 

Or ask your A device to play Family times on tuneIn
You can also find us on your mobile device install OoTunes and search for Family times


Station playlist

Robert Doc Wright godfearer
 

how do you name an encoder using NVDA?
******
If we can't look at ourselves, and ask, why?  then where does the learning start?
 
Family times where there is fun for every ear!
http://stream.wrighthere.net:8000/stream.mp3
 
Or ask your A device to play Family times on tuneIn
You can also find us on your mobile device install OoTunes and search for Family times


Re: Nvda And SPL!

Afik Souffir
 

 

Thanks!!!! It's works now.

 

I'm reading the guide now.

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: Friday, September 25, 2020 8:45 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

Hi,

SPL Assistant layer won’t show up unless you open Input Gestures dialog while Studio window is focused. This is because SPL Assistant is defined inside the Studio app module, whereas SPL Controller is part of the SPL Utilities global plugin portion of the add-on.

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Afik Souffir
Sent: Friday, September 25, 2020 10:44 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

 

Hi, there is no spl assistance, there is spl controller.

 

I've just checked.

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: Friday, September 25, 2020 8:34 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

Hi,

With Studio window focused, open input gestures dialog (NVDA menu/Preferences/Input gestures), scroll to StationPlaylist category, expand it and look for SPL Assistant, then add a memorable gesture that does not conflict with other NVDA commands.

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Afik Souffir
Sent: Friday, September 25, 2020 10:28 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

How do you assign a keystroke for open it?

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: Friday, September 25, 2020 8:19 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

Hi,

That’ll be SPL Assistant layer, D (you must assign a hotkey to open SPL Assistant layer first).

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Afik Souffir
Sent: Friday, September 25, 2020 10:16 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

 

I'm asking the same question

 

How do you know the time in a playlist?

 

 

Afik

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: Friday, September 25, 2020 7:29 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

Hi,

Yes, it is like starting from scratch with JAWS. There is a way to “label” encoders using NVDA through an add-on for StationPlaylist (expect a release announcement next week).

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Thomas E Williamson, Senior
Sent: Friday, September 25, 2020 4:45 AM
To: nvda@nvda.groups.io
Subject: [nvda] Nvda And SPL!

 

Hello,

I am wanting to use nvda with station playlist 5.40.

Will this be like starting over again in turns of the key strokes from Jaws?

For example, when I open studio, my encoders do not display the names of the radio stations that I previously named.

or is there a tutorial that can assist in this matter?

Hope this make since.

Thanks for your help in advance!

Regards,

Thomas.

 

 

 


Re: Nvda And SPL!

 

Hi,

SPL Assistant layer won’t show up unless you open Input Gestures dialog while Studio window is focused. This is because SPL Assistant is defined inside the Studio app module, whereas SPL Controller is part of the SPL Utilities global plugin portion of the add-on.

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Afik Souffir
Sent: Friday, September 25, 2020 10:44 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

 

Hi, there is no spl assistance, there is spl controller.

 

I've just checked.

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: Friday, September 25, 2020 8:34 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

Hi,

With Studio window focused, open input gestures dialog (NVDA menu/Preferences/Input gestures), scroll to StationPlaylist category, expand it and look for SPL Assistant, then add a memorable gesture that does not conflict with other NVDA commands.

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Afik Souffir
Sent: Friday, September 25, 2020 10:28 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

How do you assign a keystroke for open it?

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: Friday, September 25, 2020 8:19 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

Hi,

That’ll be SPL Assistant layer, D (you must assign a hotkey to open SPL Assistant layer first).

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Afik Souffir
Sent: Friday, September 25, 2020 10:16 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

 

I'm asking the same question

 

How do you know the time in a playlist?

 

 

Afik

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: Friday, September 25, 2020 7:29 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

Hi,

Yes, it is like starting from scratch with JAWS. There is a way to “label” encoders using NVDA through an add-on for StationPlaylist (expect a release announcement next week).

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Thomas E Williamson, Senior
Sent: Friday, September 25, 2020 4:45 AM
To: nvda@nvda.groups.io
Subject: [nvda] Nvda And SPL!

 

Hello,

I am wanting to use nvda with station playlist 5.40.

Will this be like starting over again in turns of the key strokes from Jaws?

For example, when I open studio, my encoders do not display the names of the radio stations that I previously named.

or is there a tutorial that can assist in this matter?

Hope this make since.

Thanks for your help in advance!

Regards,

Thomas.

 

 

 


Re: Nvda And SPL!

Afik Souffir
 

 

Hi, there is no spl assistance, there is spl controller.

 

I've just checked.

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: Friday, September 25, 2020 8:34 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

Hi,

With Studio window focused, open input gestures dialog (NVDA menu/Preferences/Input gestures), scroll to StationPlaylist category, expand it and look for SPL Assistant, then add a memorable gesture that does not conflict with other NVDA commands.

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Afik Souffir
Sent: Friday, September 25, 2020 10:28 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

How do you assign a keystroke for open it?

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: Friday, September 25, 2020 8:19 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

Hi,

That’ll be SPL Assistant layer, D (you must assign a hotkey to open SPL Assistant layer first).

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Afik Souffir
Sent: Friday, September 25, 2020 10:16 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

 

I'm asking the same question

 

How do you know the time in a playlist?

 

 

Afik

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: Friday, September 25, 2020 7:29 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

Hi,

Yes, it is like starting from scratch with JAWS. There is a way to “label” encoders using NVDA through an add-on for StationPlaylist (expect a release announcement next week).

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Thomas E Williamson, Senior
Sent: Friday, September 25, 2020 4:45 AM
To: nvda@nvda.groups.io
Subject: [nvda] Nvda And SPL!

 

Hello,

I am wanting to use nvda with station playlist 5.40.

Will this be like starting over again in turns of the key strokes from Jaws?

For example, when I open studio, my encoders do not display the names of the radio stations that I previously named.

or is there a tutorial that can assist in this matter?

Hope this make since.

Thanks for your help in advance!

Regards,

Thomas.

 

 

 


Re: Nvda And SPL!

 

Hi,

With Studio window focused, open input gestures dialog (NVDA menu/Preferences/Input gestures), scroll to StationPlaylist category, expand it and look for SPL Assistant, then add a memorable gesture that does not conflict with other NVDA commands.

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Afik Souffir
Sent: Friday, September 25, 2020 10:28 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

How do you assign a keystroke for open it?

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: Friday, September 25, 2020 8:19 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

Hi,

That’ll be SPL Assistant layer, D (you must assign a hotkey to open SPL Assistant layer first).

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Afik Souffir
Sent: Friday, September 25, 2020 10:16 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

 

I'm asking the same question

 

How do you know the time in a playlist?

 

 

Afik

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: Friday, September 25, 2020 7:29 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

Hi,

Yes, it is like starting from scratch with JAWS. There is a way to “label” encoders using NVDA through an add-on for StationPlaylist (expect a release announcement next week).

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Thomas E Williamson, Senior
Sent: Friday, September 25, 2020 4:45 AM
To: nvda@nvda.groups.io
Subject: [nvda] Nvda And SPL!

 

Hello,

I am wanting to use nvda with station playlist 5.40.

Will this be like starting over again in turns of the key strokes from Jaws?

For example, when I open studio, my encoders do not display the names of the radio stations that I previously named.

or is there a tutorial that can assist in this matter?

Hope this make since.

Thanks for your help in advance!

Regards,

Thomas.

 

 

 


Re: Nvda And SPL!

Afik Souffir
 

How do you assign a keystroke for open it?

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: Friday, September 25, 2020 8:19 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

Hi,

That’ll be SPL Assistant layer, D (you must assign a hotkey to open SPL Assistant layer first).

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Afik Souffir
Sent: Friday, September 25, 2020 10:16 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

 

I'm asking the same question

 

How do you know the time in a playlist?

 

 

Afik

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: Friday, September 25, 2020 7:29 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

Hi,

Yes, it is like starting from scratch with JAWS. There is a way to “label” encoders using NVDA through an add-on for StationPlaylist (expect a release announcement next week).

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Thomas E Williamson, Senior
Sent: Friday, September 25, 2020 4:45 AM
To: nvda@nvda.groups.io
Subject: [nvda] Nvda And SPL!

 

Hello,

I am wanting to use nvda with station playlist 5.40.

Will this be like starting over again in turns of the key strokes from Jaws?

For example, when I open studio, my encoders do not display the names of the radio stations that I previously named.

or is there a tutorial that can assist in this matter?

Hope this make since.

Thanks for your help in advance!

Regards,

Thomas.

 

 

 


Re: Nvda And SPL!

 

Hi,

That’ll be SPL Assistant layer, D (you must assign a hotkey to open SPL Assistant layer first).

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Afik Souffir
Sent: Friday, September 25, 2020 10:16 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

 

I'm asking the same question

 

How do you know the time in a playlist?

 

 

Afik

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: Friday, September 25, 2020 7:29 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

Hi,

Yes, it is like starting from scratch with JAWS. There is a way to “label” encoders using NVDA through an add-on for StationPlaylist (expect a release announcement next week).

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Thomas E Williamson, Senior
Sent: Friday, September 25, 2020 4:45 AM
To: nvda@nvda.groups.io
Subject: [nvda] Nvda And SPL!

 

Hello,

I am wanting to use nvda with station playlist 5.40.

Will this be like starting over again in turns of the key strokes from Jaws?

For example, when I open studio, my encoders do not display the names of the radio stations that I previously named.

or is there a tutorial that can assist in this matter?

Hope this make since.

Thanks for your help in advance!

Regards,

Thomas.

 

 

 


Re: Nvda And SPL!

Afik Souffir
 

 

I'm asking the same question

 

How do you know the time in a playlist?

 

 

Afik

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: Friday, September 25, 2020 7:29 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

Hi,

Yes, it is like starting from scratch with JAWS. There is a way to “label” encoders using NVDA through an add-on for StationPlaylist (expect a release announcement next week).

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Thomas E Williamson, Senior
Sent: Friday, September 25, 2020 4:45 AM
To: nvda@nvda.groups.io
Subject: [nvda] Nvda And SPL!

 

Hello,

I am wanting to use nvda with station playlist 5.40.

Will this be like starting over again in turns of the key strokes from Jaws?

For example, when I open studio, my encoders do not display the names of the radio stations that I previously named.

or is there a tutorial that can assist in this matter?

Hope this make since.

Thanks for your help in advance!

Regards,

Thomas.

 

 

 


Re: accessible disk imaging software.

Akash Kakkar
 

Object nav etc

On 9/25/2020 5:31 PM, Austin Pinto wrote:
what are the work arounds for magrum reflect?

On 9/25/20, Akash Kakkar <akash.diverse@gmail.com> wrote:
DriveSnapshot also doesn't have any incremental backup support.

I use it on regular basis

On 9/25/2020 2:39 PM, Stephen wrote:
Have you tried drive snapshot or image for windows?
They are extremely accessible.
I think drivesnapshot does full and differencial backup and image for
windows does full, differencial and increments.

----- Original Message -----
From: Austin Pinto <austinpinto.xaviers@gmail.com>
Reply-To: <nvda@nvda.groups.io>
To: <access-uk@freelists.org>
Sent: 9/25/2020 2:51:10 PM
Subject: [nvda] accessible disk imaging software.
________________________________________________________________________________

hi all.
i require an accessible disk imaging software that can backup and
restore windows 10 and data and also has incrimental and differencial
backup features.
i used to use active@disk image but it doesnt restore windows 10
properly.
please suggest











Re: Nvda And SPL!

 

Hi,

Yes, it is like starting from scratch with JAWS. There is a way to “label” encoders using NVDA through an add-on for StationPlaylist (expect a release announcement next week).

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Thomas E Williamson, Senior
Sent: Friday, September 25, 2020 4:45 AM
To: nvda@nvda.groups.io
Subject: [nvda] Nvda And SPL!

 

Hello,

I am wanting to use nvda with station playlist 5.40.

Will this be like starting over again in turns of the key strokes from Jaws?

For example, when I open studio, my encoders do not display the names of the radio stations that I previously named.

or is there a tutorial that can assist in this matter?

Hope this make since.

Thanks for your help in advance!

Regards,

Thomas.

 

 

 


Re: Change Ringing: Practice and Theory

 

Damien,

          I can't help you out specifically, but I wanted to note that I've updated the topic to be fully descriptive, as Change Ringing is definitely "a thing of its own" and those who are into it will recognize it better.

          Since you're asking about what software related to change ringing is accessible with NVDA, that's entirely on-topic for the main group.  If the time comes where something is recommended and you want to discuss how to use that software, that topic should be started on the Chat Subgroup.
--

Brian - Windows 10 Pro, 64-Bit, Version 2004, Build 19041  

It’s hard waking up and realizing it’s not always black and white.

 

     ~ Kelley Boorn

 


Change Ringing: Practice and Theory

Damien Garwood
 

Hi all,
I know this is a rather specialised topic, but I'll ask anyway on the off chance.
1. Are there any change-ringers here who could advise me of the best ringing software that works with NVDA?
I'm looking for something that will enable me to learn new methods, so it can be either:
A. An app that plays a method, or prints the numbers out in CSV form
B. An app that requires you to ring a method, or follow calls, perhaps simulating a band and a conductor, and scores you on it.
2. I'm very interested into how change ringing compositions are made (being a musical composer myself). Apparently computers can generate them now, because it's very mathematical. I'd like to learn more about this, but whatever math (or maths, if you prefer) based articles I try and read, they're either covered with graphics, or a mysterious area of three or more spaces that mean absolutely nothing.
Someone suggested that Mathplayer was the way forward, but while that does interact with some of these areas, it didn't work with all of them, and the number of problems I had both understanding how to make sense of the information it provided when it did work, and then eventually uninstalling it, I'm a little cautious to start using it again.
Cheers.
Damien.


Re: Gmail Filter Setup - Specifically, for the NVDA Group Messages

 

On Fri, Sep 25, 2020 at 12:07 PM, Cristóbal wrote:
When I create a filter, I check the skip the inbox option so that the messages are sent directly to that folder/label.
-
As do I.  If I'm sending something to a specific label/folder I have no desire to have what is, for all practical intents and purposes, a second copy still resident in my Inbox.

I can envision some allowing it to "land in both" with the dedicated folder being their personal archive, but you still then have the issue of if you delete something from the inbox it's gone from all other labels it gets assigned.  The only way to nuke from the inbox and keep elsewhere is to delete the inbox label itself, leaving all others intact.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 2004, Build 19041  

It’s hard waking up and realizing it’s not always black and white.

 

     ~ Kelley Boorn

 


Re: Gmail Filter Setup - Specifically, for the NVDA Group Messages

Cristóbal
 

When I create a filter, I check the skip the inbox option so that the messages are sent directly to that folder/label. All my mailing list emails are sent to a mailing list folder for example.

 

Cristóbal

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Brian Vogel
Sent: Wednesday, September 23, 2020 11:56 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Gmail Filter Setup - Specifically, for the NVDA Group Messages

 

Chris,

          Yes, that is "what they are," and Gmail uses a very peculiar mechanism of their own design for this, but somewhere beneath he fact that a message can have multiple labels applied, and show up in multiple folders as a result, you are correct that there is only one copy.  

           I haven't played with creating a message with multiple labels and then deleting it under only one of them to see if it remains in the others, which would suggest that there are multiple folders, most of which use symbolic links to access the actual message wherever it is.

            I've never had any need to assign multiple labels to a given message, and find it annoying when I do assign a specific one that the "inbox" label is not removed by default.  You have to do that in the filter.

--

Brian - Windows 10 Pro, 64-Bit, Version 2004, Build 19041  

A gentleman is one who never hurts anyone's feelings unintentionally.

          ~ Oscar Wilde

 


Re: accessible disk imaging software.

Michel Such
 

Hi,

 

I can confirm Image For Windows works fine with NVDA and is fully accessible.

 


Re: NVDA Speech delay after Computer is Idle

Chris
 

Sounds like a power management issue

Possibly because  your hard drive is going to sleep, the delay may well be because you are using a mechanical HDD drive ,

 

Rather than a solid state SSD drive

 

You can prevent your hard drive going to sleep through your advanced power plan settings

 

 

 

From: Betsy Grenevitch
Sent: 25 September 2020 14:39
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA Speech delay after Computer is Idle

 

If it is the computer going to sleep how do you wake it up? Is there a setting that may have gotten changed with the latest Windows update. I did not have this problem until then.


Re: Changing Language Back To english!

Tony Ballou
 

Hi Thomas,

 

No problem, glad to help you out.

 

Tony

3581 - 3600 of 81060