Date   

Re: nvda 2018 rc3 itunes issue

Quentin Christensen
 

Joseph,

Could you please send me a copy of your log?  Info at https://github.com/nvaccess/nvda/wiki/LogFilesAndCrashDumps if you need.  Ideally at debug level (and recreating the problem so any errors are recorded in the log).

Send to info@...

Regards

Quentin.

On Fri, Sep 14, 2018 at 1:48 PM, Joseph Weakland <josephweakland@...> wrote:
when i launch itunes with nvda rc3 running i hear a double beep tone and nvda don't speak on main window:( why is this?

using a windows 10 pc 64 bit


--
email
josephweakland@...
sent from Joseph Weakland's PC







--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


windows one core voice max rate

Manish Agrawal
 

Hi,

I tried using the windows one core voice with NVDA today. I tried increasing the rate of speech but even at 100% the rate was slower than I would like.

The same voice, Microsoft David, can be set to a much faster rate when using narrator. With narrator, I could get David to speak almost as fast as espeakNG.

 

Has anyone else noticed this and figured out a way around this?

 

Regards,

Manish


Re: problems with nvda2018.3rc1

P. Otter
 

hi, I've uninstalled the emoticon add-on.
but I still can not read emoticons anymore.
what can be wrong?
i'I've installed nvda 2018.3rc1 the emoticon add-on is completely removed and also after a reboot no emoticons will be red!
that was the reason to ask I can emoticons put on or off.
thanks in advance
paul otter


Op 13-9-2018 om 18:31 schreef Chris via Groups.Io:

Because the emoticon add-on you have installed conflicts with nvda 18.3

Either go back to 18.2 or remove the add-on as its not really required anymore

Until you have removed the add-on you are going to have the issue 😃

 

 

From: P. Otter
Sent: 13 September 2018 16:50
To: nvda@nvda.groups.io
Subject: Re: [nvda] problems with nvda2018.3rc1

 

hi, please help me one mor times.
what you say was correct but how can I enable the emoji's
nvda 2018.3 rc1 don't read any emoji but i know it is possible.
 can I put it on or off somewhere and with which key combination does that have to be done?
thanks in advance

paul otter


Op 13-9-2018 om 02:14 schreef Quentin Christensen:

Hi Paul,

 

Press WINDOWS+. or WINDOWS+; to open the emoji panel, then either right arrow through the items in the current section, press tab to move to the sections and arrows to choose a new section, or start typing to search for emoji, eg "cake" 🍰, "Smiling" or "firetruck" 🚒 (as with many other search fields, you don't necessarily have to type the full thing - I typed "fire" to narrow the results down to a handful to get the fire truck).

 

Press ENTER to insert your chosen emoji, and escape to close the panel.

 

Regards

 

Quentin.

 

On Thu, Sep 13, 2018 at 5:16 AM, P. Otter <pam.otter@...> wrote:

and can you tell me, how can I create an emoticon while emoticons add-on is disabled?
i think it is very good possible that you're right!
please help.
thanks in advance!
paul otter
 

Op 12-9-2018 om 18:26 schreef Chris via Groups.Io:

Try disabling or removing the emoticon add-on see if that helps any, as nvda now supports emoticons itself

 

 

From: P. Otter
Sent: 12 September 2018 16:28
To: nvda@nvda.groups.io
Subject: [nvda] problems with nvda2018.3rc1

 

best forum members,

I have downloaded the nvda 2018.3 rc1 and put it into use.

but I am not entirely positive, there is still something here and there.

Like, I have already experienced a number of times, that I used the

emoticon add-on, often it goes well but suddenly without any apparent

reason it gets stuck.

With alt tab I can then go back to the text where I wanted to place an

emoji.

but it is not going well. Only after I have restarted nvda again can I

place an emoticon again.

are there more people who have the same problem?

with nvda 2018.2 I did not have these problems.

do I have to update the emoticon add-on?

is it available?

with a curious greeting

paul otter

 

 

 

 



 

--

Quentin Christensen
Training and Support Manager

 

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

 

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 

 

 



keybase

 

Does anyone out there use this service? I ask out of curiosity. It is decently accessible. For those who want to know more, go to this link:

Keybase


itunes works now

Joseph Weakland
 

itunes works on nvda2018rc3 on my system woot


--
email
josephweakland@att.net
sent from Joseph Weakland's PC


nvda 2018 rc3 itunes issue

Joseph Weakland
 

when i launch itunes with nvda rc3 running i hear a double beep tone and nvda don't speak on main window:( why is this?

using a windows 10 pc 64 bit


--
email
josephweakland@att.net
sent from Joseph Weakland's PC


Re: A security change in Chrome you would be wise to correct

 

On Thu, Sep 13, 2018 at 04:58 PM, Ervin, Glenn wrote:
If you open Chrome, and close it and bring up Task Manager, you’ll see several instances still running.
Only if you keep the default settings.  You can go to Chrome's settings, drop open the "Advanced" section, then search for, "Continue running background apps when Google Chrome is closed," and turn that toggle off.  You won't have any Chrome process running when Chrome is actually not in use then.
 
--

Brian - Windows 10 Home, 64-Bit, Version 1803, Build 17134  

    The psychology of adultery has been falsified by conventional morals, which assume, in monogamous countries, that attraction to one person cannot co-exist with a serious affection for another.  Everybody knows that this is untrue. . .

           ~ Bertrand Russell

 

 


Re: itunes issue handled

Joseph Weakland
 

guess i'll have to upgrade to rc3 then to use itunes

On 9/13/2018 7:49 PM, Shaun Everiss wrote:
Hi.

Wow joseph and all, that was a really quick fix, itunes uia works now its just like it was.

For now I have loaded rc3 on the effected machines and it works.

Its good this came out during an near update cycle.

What was actually wrong and did my descriptions help at all.

Its good that all things work as expected though.

I have all my systems on the latest itunes now.

Thanks for promptly fixing.




--
email
josephweakland@att.net
sent from Joseph Weakland's PC


Thanks for that. I read the tweet earlier and just grabbed the update.

Sarah k Alawami
 


TTake car

Sarah Alawami, owner of TFFP. . For more info go to our website: http://www.tffppodcast.com
For stuff we sell, mac training materials and  tutorials go to http://www.tffppodcast.com/premium
and for hosting options go to http://www.tffppodcast.com/hosting
to subscribe to the feed click here:
http://feeds.feedburner.com/tffp
And for the listen page go here:
http://www.tffppodcast.com/listen

Finally, to become a patron and help support the podcast go here:
http://www.tffppodcast.com/pod-pledge

On 9/13/2018 5:57 PM, Quentin Christensen wrote:
And RC3 resolves issues with iTunes as well: https://www.nvaccess.org/post/nvda-2018-3rc3-released/

On Fri, Sep 14, 2018 at 7:03 AM, Joseph Lee <joseph.lee22590@...> wrote:
Hi,
This one resolves NVDA shortcut key problem for German users.
Cheers,
Joseph

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Brian's Mail
list account via Groups.Io
Sent: Thursday, September 13, 2018 1:48 PM
To: nvda@groups.io
Subject: [nvda] RC2?

I see there is now an RC 2. what has been changed?
 Brian

bglists@...
Sent via blueyonder.
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.









--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


Re: installing RC2 and RC3

Sarah k Alawami
 

I think mine restarted juist now, so I would say for now, no this is not normal.

On 9/13/2018 6:25 PM, Don H wrote:
Noticed when updating from RC1 to RC2 and from RC2 to RC3 NVDA didn't do a restart after the completion as updates normally do.  Is this a change in the update process?




installing RC2 and RC3

Don H
 

Noticed when updating from RC1 to RC2 and from RC2 to RC3 NVDA didn't do a restart after the completion as updates normally do.  Is this a change in the update process?


Re: RC2?

Quentin Christensen
 

I'm out as well - all I'm doing is sitting here sniffling, Leonard, Mick and Reef did the work :)

On Fri, Sep 14, 2018 at 11:10 AM, Joseph Lee <joseph.lee22590@...> wrote:
Hi,
Don't thank me - you should be thanking Leonard de Ruijter, Quentin, and many others.
Cheers,
Joseph

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Shaun Everiss
Sent: Thursday, September 13, 2018 6:09 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] RC2?

Thanks for that release joseph.



On 9/14/2018 12:57 PM, Quentin Christensen wrote:
> And RC3 resolves issues with iTunes as well:
> https://www.nvaccess.org/post/nvda-2018-3rc3-released/
>
> On Fri, Sep 14, 2018 at 7:03 AM, Joseph Lee
> <joseph.lee22590@...>
> wrote:
>
>> Hi,
>> This one resolves NVDA shortcut key problem for German users.
>> Cheers,
>> Joseph
>>
>> -----Original Message-----
>> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Brian's
>> Mail list account via Groups.Io
>> Sent: Thursday, September 13, 2018 1:48 PM
>> To: nvda@groups.io
>> Subject: [nvda] RC2?
>>
>> I see there is now an RC 2. what has been changed?
>>   Brian
>>
>> bglists@...
>> Sent via blueyonder.
>> Please address personal E-mail to:-
>> briang1@..., putting 'Brian Gaff'
>> in the display name field.
>>
>>
>>
>>
>>
>>
>>
>









--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


Re: RC2?

 

Hi,
Don't thank me - you should be thanking Leonard de Ruijter, Quentin, and many others.
Cheers,
Joseph

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Shaun Everiss
Sent: Thursday, September 13, 2018 6:09 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] RC2?

Thanks for that release joseph.



On 9/14/2018 12:57 PM, Quentin Christensen wrote:
And RC3 resolves issues with iTunes as well:
https://www.nvaccess.org/post/nvda-2018-3rc3-released/

On Fri, Sep 14, 2018 at 7:03 AM, Joseph Lee
<joseph.lee22590@gmail.com>
wrote:

Hi,
This one resolves NVDA shortcut key problem for German users.
Cheers,
Joseph

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Brian's
Mail list account via Groups.Io
Sent: Thursday, September 13, 2018 1:48 PM
To: nvda@groups.io
Subject: [nvda] RC2?

I see there is now an RC 2. what has been changed?
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal E-mail to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.







Re: RC2?

 

Thanks for that release joseph.

On 9/14/2018 12:57 PM, Quentin Christensen wrote:
And RC3 resolves issues with iTunes as well:
https://www.nvaccess.org/post/nvda-2018-3rc3-released/

On Fri, Sep 14, 2018 at 7:03 AM, Joseph Lee <joseph.lee22590@gmail.com>
wrote:

Hi,
This one resolves NVDA shortcut key problem for German users.
Cheers,
Joseph

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Brian's Mail
list account via Groups.Io
Sent: Thursday, September 13, 2018 1:48 PM
To: nvda@groups.io
Subject: [nvda] RC2?

I see there is now an RC 2. what has been changed?
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal E-mail to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.







NVDA 2018.3rc3 now available

Quentin Christensen
 

Hi everyone,

As noted in several threads, there have been issues with iTunes, and also issues with installing and creating the shortcut in German.

This morning we have released NVDA 2018.3rc3 which aims to address both of these issues.

Find the release notes and links to download and the full what's new at: https://www.nvaccess.org/post/nvda-2018-3rc3-released/

Kind regards

Quentin.

--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


Re: Automatic Reading of Footnotes in Word

Akshaya Choudhary
 

Glad I could Help!

For reading the comments of your tutors you don't need to convert the original word file. NVDA will announce when it will come across a comment while reading a document. Then, you can press NVDA+alt+C to read that particular comment. Additionally, you can press NVDA+F7 to bring up the elements list in word and can get the preview of all the comments in the document. You can even jump to the comment of your choice from the same.
--
Regards,
Sociohack


Add-on Updater (proof of concept) September 14th build will now check updates for Windows 10 App Essentials

 

Hi all,

 

Add-on Updater (proof of concept) September 14th build is now available. After installing this build, if you happen to be using Windows 10 App Essentials (development snapshots, that is), you’ll find that you might be prompted to update that add-on, too. If this is the case, I recommend updating Windows 10 App Essentials first, and then update Add-on Updater.

 

Cheers,

Joseph


Re: RC2?

Quentin Christensen
 

And RC3 resolves issues with iTunes as well: https://www.nvaccess.org/post/nvda-2018-3rc3-released/

On Fri, Sep 14, 2018 at 7:03 AM, Joseph Lee <joseph.lee22590@...> wrote:
Hi,
This one resolves NVDA shortcut key problem for German users.
Cheers,
Joseph

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Brian's Mail
list account via Groups.Io
Sent: Thursday, September 13, 2018 1:48 PM
To: nvda@groups.io
Subject: [nvda] RC2?

I see there is now an RC 2. what has been changed?
 Brian

bglists@...
Sent via blueyonder.
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.









--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


Re: Softwares to compose music for the blind

John Isige
 

I missed the beginning of this, but if you're looking for stuff that does notation, MuseScore can at least read it, rather you can read it with it, and some work was done on making adding notation accessible, but I haven't messed with any of it. Here's the main MuseScore page.


https://musescore.org/en


Here's the accessibility stuff for writing notation.


https://accessiblemusicnotation.wordpress.com/2017/06/17/new-accessibility-work-on-musescore/

On 9/13/2018 18:49, Jackie wrote:
Well, there's always ABC, about which you can find out more here:
http://trillian.mit.edu/~jc/music/abc/doc/ABCtut.html

On 9/13/18, Arno Schuh <arno.schuh@in-trier.de> wrote:
Hi,

Dancing Dots has afaIk. OCR for scores, too:
http://www.dancingdots.com/main/index.htm
I suppose the software to scan scores also is able to scan PDF.

Yours sincerely

Arno

Am Donnerstag, 13. September 2018 15:33 schrieb Giles Turnbull
<giles.turnbull@gmail.com>:

I have a sort-of similar question. I used to play piano in my sighted
days but mever memorised any of the music, prefering to read the
score as I played. Now I can't read a score I can't remember much of
those pieces.

I have PDF scores of a lot of piano music and wonder if there is any
way that something like Muse Score could open a PDF and I could
somehow figure out what notes are where? I'm thinking of chords with
three or more notes across both hands, my ear being unable to figure
them out by listening to a recording.

I'd love a means of converting a PDF or a midi file into a text from
which I can determine the notes ... the durations are less important
for me since I can remember how the pieces sound.

It's funny, I just asked a sighted friend for help with three notes
in Chopin's first ballade which I was struggling to remember just
this morning!

Thanks for any ideas (and no, I never learned to read Braille music)

Giles





itunes issue handled

 

Hi.

Wow joseph and all, that was a really quick fix, itunes uia works now its just like it was.

For now I have loaded rc3 on the effected machines and it works.

Its good this came out during an near update cycle.

What was actually wrong and did my descriptions help at all.

Its good that all things work as expected though.

I have all my systems on the latest itunes now.

Thanks for promptly fixing.