Date   

Re: Accessibility check request

Rayn Darren
 

Huh, yup, that fixed it. there are no tables on the page though; there are images of bars that visually mark sections however.

Thanks!

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of hurrikennyandopo ...
Sent: Wednesday, August 8, 2018 2:42 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Accessibility check request

 

Hi

Uncheck the box called tables under the document   formatting  section in NVDA
I do not think the one under it would have to be done.

I had this turned off on your website then turned it on and then i heard it say what you said.

You must of used some type of table?

Gene nz
 

On 8/9/2018 8:31 AM, Rayn Darren wrote:

Hi group,

 

I’ve run across a problem and I can’t quite figure out if it’s just me or happens to others. I was on my website, www.dragonsofmyth.com and found NVDA reading  “table”, “table with 1 row and one column”, “table with 3 rows” over and over again, then reading the text on the page. This only happens on specific templates for the site. I know for a fact that there are no tables on the page as I made the site. This is a new problem, that I only noticed yesterday. The only thing I can think of is NVDA is picking up the images that are used to visually delineate between columns and is recognizing them as “tables”. I would really appreciate it if someone, or several someone’s could confirm this? I’m hesitant to alter anything at the moment, as if it’s just me, I’ll deal with it 😊.

 

Thanks so much,

Rayn

 


Re: Accessibility check request

Rayn Darren
 

I almost exclusively use Edge, I'm using jade template as mythblackplain, which I made does not have the issue. Yes, you can see it on the homepage without creating a character, though you're more than welcome to do so 😊.

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Tyler Spivey
Sent: Wednesday, August 8, 2018 2:38 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Accessibility check request

Yep. What browser are you using, and what template?
I assume you can see this on the main homepage, without creating a
character?

On 8/8/2018 2:32 PM, Rayn Darren wrote:
Hmmmm, the setting is not checked. Any other suggestions?

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Tyler Spivey
Sent: Wednesday, August 8, 2018 1:57 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Accessibility check request

Go to NVDA, Preferences, Settings, Browse Mode, and uncheck Include
layout tables.

On 8/8/2018 1:31 PM, Rayn Darren wrote:
Hi group,



I’ve run across a problem and I can’t quite figure out if it’s just me
or happens to others. I was on my website, www.dragonsofmyth.com
<http://www.dragonsofmyth.com> and found NVDA reading “table”, “table
with 1 row and one column”, “table with 3 rows” over and over again,
then reading the text on the page. This only happens on specific
templates for the site. I know for a fact that there are no tables on
the page as I made the site. This is a new problem, that I only noticed
yesterday. The only thing I can think of is NVDA is picking up the
images that are used to visually delineate between columns and is
recognizing them as “tables”. I would really appreciate it if someone,
or several someone’s could confirm this? I’m hesitant to alter anything
at the moment, as if it’s just me, I’ll deal with it 😊.



Thanks so much,

Rayn








Re: Accessibility check request

Gene
 

The setting that was discussed only stops announcement of layout tables.  Turn report tables off in document formatting.
 
But what may have changed on the site to cause this behavior is something I don't know.  That will solve the problem of what you hear.  If you are concerned about other blind people using the site, you would have to find out what the underlying structure is on the site causing the announcement.
 
Gene

----- Original Message -----
Sent: Wednesday, August 08, 2018 4:32 PM
Subject: Re: [nvda] Accessibility check request

Hmmmm, the setting is not checked. Any other suggestions?

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Tyler Spivey
Sent: Wednesday, August 8, 2018 1:57 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Accessibility check request

Go to NVDA, Preferences, Settings, Browse Mode, and uncheck Include
layout tables.

On 8/8/2018 1:31 PM, Rayn Darren wrote:
> Hi group,
>
>
>
> I’ve run across a problem and I can’t quite figure out if it’s just me
> or happens to others. I was on my website, www.dragonsofmyth.com
> <http://www.dragonsofmyth.com> and found NVDA reading  “table”, “table
> with 1 row and one column”, “table with 3 rows” over and over again,
> then reading the text on the page. This only happens on specific
> templates for the site. I know for a fact that there are no tables on
> the page as I made the site. This is a new problem, that I only noticed
> yesterday. The only thing I can think of is NVDA is picking up the
> images that are used to visually delineate between columns and is
> recognizing them as “tables”. I would really appreciate it if someone,
> or several someone’s could confirm this? I’m hesitant to alter anything
> at the moment, as if it’s just me, I’ll deal with it 😊.
>
>
>
> Thanks so much,
>
> Rayn
>
>









Re: Accessibility check request

hurrikennyandopo ...
 

Hi

Uncheck the box called tables under the document   formatting  section in NVDA
I do not think the one under it would have to be done.

I had this turned off on your website then turned it on and then i heard it say what you said.

You must of used some type of table?

Gene nz
 

On 8/9/2018 8:31 AM, Rayn Darren wrote:

Hi group,

 

I’ve run across a problem and I can’t quite figure out if it’s just me or happens to others. I was on my website, www.dragonsofmyth.com and found NVDA reading  “table”, “table with 1 row and one column”, “table with 3 rows” over and over again, then reading the text on the page. This only happens on specific templates for the site. I know for a fact that there are no tables on the page as I made the site. This is a new problem, that I only noticed yesterday. The only thing I can think of is NVDA is picking up the images that are used to visually delineate between columns and is recognizing them as “tables”. I would really appreciate it if someone, or several someone’s could confirm this? I’m hesitant to alter anything at the moment, as if it’s just me, I’ll deal with it 😊.

 

Thanks so much,

Rayn



Re: Accessibility check request

Tyler Spivey
 

Yep. What browser are you using, and what template?
I assume you can see this on the main homepage, without creating a
character?

On 8/8/2018 2:32 PM, Rayn Darren wrote:
Hmmmm, the setting is not checked. Any other suggestions?

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Tyler Spivey
Sent: Wednesday, August 8, 2018 1:57 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Accessibility check request

Go to NVDA, Preferences, Settings, Browse Mode, and uncheck Include
layout tables.

On 8/8/2018 1:31 PM, Rayn Darren wrote:
Hi group,



I’ve run across a problem and I can’t quite figure out if it’s just me
or happens to others. I was on my website, www.dragonsofmyth.com
<http://www.dragonsofmyth.com> and found NVDA reading “table”, “table
with 1 row and one column”, “table with 3 rows” over and over again,
then reading the text on the page. This only happens on specific
templates for the site. I know for a fact that there are no tables on
the page as I made the site. This is a new problem, that I only noticed
yesterday. The only thing I can think of is NVDA is picking up the
images that are used to visually delineate between columns and is
recognizing them as “tables”. I would really appreciate it if someone,
or several someone’s could confirm this? I’m hesitant to alter anything
at the moment, as if it’s just me, I’ll deal with it 😊.



Thanks so much,

Rayn








Re: Accessibility check request

Rayn Darren
 

Hmmmm, the setting is not checked. Any other suggestions?

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Tyler Spivey
Sent: Wednesday, August 8, 2018 1:57 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Accessibility check request

Go to NVDA, Preferences, Settings, Browse Mode, and uncheck Include
layout tables.

On 8/8/2018 1:31 PM, Rayn Darren wrote:
Hi group,



I’ve run across a problem and I can’t quite figure out if it’s just me
or happens to others. I was on my website, www.dragonsofmyth.com
<http://www.dragonsofmyth.com> and found NVDA reading “table”, “table
with 1 row and one column”, “table with 3 rows” over and over again,
then reading the text on the page. This only happens on specific
templates for the site. I know for a fact that there are no tables on
the page as I made the site. This is a new problem, that I only noticed
yesterday. The only thing I can think of is NVDA is picking up the
images that are used to visually delineate between columns and is
recognizing them as “tables”. I would really appreciate it if someone,
or several someone’s could confirm this? I’m hesitant to alter anything
at the moment, as if it’s just me, I’ll deal with it 😊.



Thanks so much,

Rayn


Re: Accessibility check request

Rayn Darren
 

Thanks so much, will give it a shot..... is this a new thing? I've been running NVDA for years and have had the site for even longer and it's never happened before.

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Tyler Spivey
Sent: Wednesday, August 8, 2018 1:57 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Accessibility check request

Go to NVDA, Preferences, Settings, Browse Mode, and uncheck Include
layout tables.

On 8/8/2018 1:31 PM, Rayn Darren wrote:
Hi group,



I’ve run across a problem and I can’t quite figure out if it’s just me
or happens to others. I was on my website, www.dragonsofmyth.com
<http://www.dragonsofmyth.com> and found NVDA reading “table”, “table
with 1 row and one column”, “table with 3 rows” over and over again,
then reading the text on the page. This only happens on specific
templates for the site. I know for a fact that there are no tables on
the page as I made the site. This is a new problem, that I only noticed
yesterday. The only thing I can think of is NVDA is picking up the
images that are used to visually delineate between columns and is
recognizing them as “tables”. I would really appreciate it if someone,
or several someone’s could confirm this? I’m hesitant to alter anything
at the moment, as if it’s just me, I’ll deal with it 😊.



Thanks so much,

Rayn


Re: How to click on links when they won't click

Tyler Wood
 

Hi,

Capslock shift m does work, sometimes. Numpad insert and slash is another way to focus the mouse pointer to the NVDA cursor in desktop keyboard mode.

I say sometimes because it can be very hit or miss, especially if something else is taking focus.



On 08-Aug-2018 4:20 PM, Brian Vogel wrote:
On Wed, Aug 8, 2018 at 04:20 PM, Scott VanDeWalle wrote:

Once in a while, more and more lately it seems, I can not click with the enter key, or control enter, or the space bar and even with the num pad using numpad 0 enter.

So how do you click on a link in that case? 

Scott,

            Interesting that you bring this up today, as what I think is a similar situation to yours is something I just answered, and lamely (since I have no solution), is that there is the increasing use of "mouse hover over" menu systems that screen readers identify as links.  The one I was just talking about is the main navigation structure on crochet.org and on that page once you're in their navigation area only the "Home" and "Blog" links are actual links.  The others are hover-over menus and I cannot activate them with any keyboard commands I have tried.  Once my mouse is hovered over the top level links the menu appears, and I can tab through those links, but what's particularly evil is that most of those links are second level hover over controls that cause the next submenu to show up, and I can't make that submenu appear without hovering over.

             I could have sworn that either JAWS or NVDA had a command that was the equivalent of "bring the mouse pointer here as though it were hovering over this item" but I can't find them at the moment.

             If you can post a specific site you're having this issue with I can at least confirm whether this sort of navigation structure is at play there.
 
--

Brian - Windows 10 Home, 64-Bit, Version 1803, Build 17134  

    A little kindness from person to person is better than a vast love for all humankind.

           ~ Richard Dehmel

 

 



Re: How to click on links when they won't click

 

On Wed, Aug 8, 2018 at 04:20 PM, Scott VanDeWalle wrote:

Once in a while, more and more lately it seems, I can not click with the enter key, or control enter, or the space bar and even with the num pad using numpad 0 enter.

So how do you click on a link in that case? 

Scott,

            Interesting that you bring this up today, as what I think is a similar situation to yours is something I just answered, and lamely (since I have no solution), is that there is the increasing use of "mouse hover over" menu systems that screen readers identify as links.  The one I was just talking about is the main navigation structure on crochet.org and on that page once you're in their navigation area only the "Home" and "Blog" links are actual links.  The others are hover-over menus and I cannot activate them with any keyboard commands I have tried.  Once my mouse is hovered over the top level links the menu appears, and I can tab through those links, but what's particularly evil is that most of those links are second level hover over controls that cause the next submenu to show up, and I can't make that submenu appear without hovering over.

             I could have sworn that either JAWS or NVDA had a command that was the equivalent of "bring the mouse pointer here as though it were hovering over this item" but I can't find them at the moment.

             If you can post a specific site you're having this issue with I can at least confirm whether this sort of navigation structure is at play there.
 
--

Brian - Windows 10 Home, 64-Bit, Version 1803, Build 17134  

    A little kindness from person to person is better than a vast love for all humankind.

           ~ Richard Dehmel

 

 


Re: Accessibility check request

Tyler Spivey
 

Go to NVDA, Preferences, Settings, Browse Mode, and uncheck Include
layout tables.

On 8/8/2018 1:31 PM, Rayn Darren wrote:
Hi group,

 

I’ve run across a problem and I can’t quite figure out if it’s just me
or happens to others. I was on my website, www.dragonsofmyth.com
<http://www.dragonsofmyth.com> and found NVDA reading  “table”, “table
with 1 row and one column”, “table with 3 rows” over and over again,
then reading the text on the page. This only happens on specific
templates for the site. I know for a fact that there are no tables on
the page as I made the site. This is a new problem, that I only noticed
yesterday. The only thing I can think of is NVDA is picking up the
images that are used to visually delineate between columns and is
recognizing them as “tables”. I would really appreciate it if someone,
or several someone’s could confirm this? I’m hesitant to alter anything
at the moment, as if it’s just me, I’ll deal with it 😊.

 

Thanks so much,

Rayn


Re: How to click on links when they won't click

Gene
 

That's what shift enter does and it's faster and more convenient.
 
Gene

----- Original Message -----
Sent: Wednesday, August 08, 2018 3:37 PM
Subject: Re: [nvda] How to click on links when they won't click

Try using the context key and cursor to "open in a new window" and hit enter.  This certainly works for some links.


Best wishes


Mike.


On 08/08/2018 21:33, Cohn, Jonathan wrote:

The only option I didn’t see you list was to route the mouse to the navigator item and then click the mouse button.

 

I have seen one style of graphical link that Firefox screen readers can’t seem to use at all.

 

These links have a graphic that is a background image (thereby occupying no real space and then the link is labeled for screen readers with “off screen text”. I think Firefox knows the text is out of the view port but the scrren reader commands to move mouse to content and then click perhaps are trying to move the mouse to the entirely wrong place. On the sites I help with accessibility on, we were able to tell the developers to use an aria-label instead of off screen text and this solved the problem.  But unless you can talk to the developer of the site I guess you can’t go that approach.

In which case the only other solution I can think of is try another browser or screen reader.

 

Take care

!

 

Jonathan Cohn

 

 

From: <nvda@nvda.groups.io> on behalf of Scott VanDeWalle <scottvandewalle2@...>
Reply-To: "nvda@nvda.groups.io" <nvda@nvda.groups.io>
Date: Wednesday, August 8, 2018 at 4:24 PM
To: "nvda@nvda.groups.io" <nvda@nvda.groups.io>
Subject: [nvda] How to click on links when they won't click

 

Hi all.

I hope someone can help me here.

Once in a while, more and more lately it seems, I can not click with the enter key, or control enter, or the space bar and even with the num pad using numpad 0 enter.

So how do you click on a link in that case? 

Thank you

 

Scott

 

Sent from Mail for Windows 10

 



Re: How to click on links when they won't click

Gene
 

While I doubt this will help in a lot of cases, sometimes turning browse mode off and then pressing enter on the link, use read current line to make sure you are on the link after browse mode is off first, might work.
 
Gene

----- Original Message -----
Sent: Wednesday, August 08, 2018 3:33 PM
Subject: Re: [nvda] How to click on links when they won't click

The only option I didn’t see you list was to route the mouse to the navigator item and then click the mouse button.

 

I have seen one style of graphical link that Firefox screen readers can’t seem to use at all.

 

These links have a graphic that is a background image (thereby occupying no real space and then the link is labeled for screen readers with “off screen text”. I think Firefox knows the text is out of the view port but the scrren reader commands to move mouse to content and then click perhaps are trying to move the mouse to the entirely wrong place. On the sites I help with accessibility on, we were able to tell the developers to use an aria-label instead of off screen text and this solved the problem.  But unless you can talk to the developer of the site I guess you can’t go that approach.

In which case the only other solution I can think of is try another browser or screen reader.

 

Take care

!

 

Jonathan Cohn

 

 

From: <nvda@nvda.groups.io> on behalf of Scott VanDeWalle <scottvandewalle2@...>
Reply-To: "nvda@nvda.groups.io" <nvda@nvda.groups.io>
Date: Wednesday, August 8, 2018 at 4:24 PM
To: "nvda@nvda.groups.io" <nvda@nvda.groups.io>
Subject: [nvda] How to click on links when they won't click

 

Hi all.

I hope someone can help me here.

Once in a while, more and more lately it seems, I can not click with the enter key, or control enter, or the space bar and even with the num pad using numpad 0 enter.

So how do you click on a link in that case? 

Thank you

 

Scott

 

Sent from Mail for Windows 10

 


Re: How to click on links when they won't click

Mike Gurney
 

Try using the context key and cursor to "open in a new window" and hit enter.  This certainly works for some links.


Best wishes


Mike.


On 08/08/2018 21:33, Cohn, Jonathan wrote:

The only option I didn’t see you list was to route the mouse to the navigator item and then click the mouse button.

 

I have seen one style of graphical link that Firefox screen readers can’t seem to use at all.

 

These links have a graphic that is a background image (thereby occupying no real space and then the link is labeled for screen readers with “off screen text”. I think Firefox knows the text is out of the view port but the scrren reader commands to move mouse to content and then click perhaps are trying to move the mouse to the entirely wrong place. On the sites I help with accessibility on, we were able to tell the developers to use an aria-label instead of off screen text and this solved the problem.  But unless you can talk to the developer of the site I guess you can’t go that approach.

In which case the only other solution I can think of is try another browser or screen reader.

 

Take care

!

 

Jonathan Cohn

 

 

From: <nvda@nvda.groups.io> on behalf of Scott VanDeWalle <scottvandewalle2@...>
Reply-To: "nvda@nvda.groups.io" <nvda@nvda.groups.io>
Date: Wednesday, August 8, 2018 at 4:24 PM
To: "nvda@nvda.groups.io" <nvda@nvda.groups.io>
Subject: [nvda] How to click on links when they won't click

 

Hi all.

I hope someone can help me here.

Once in a while, more and more lately it seems, I can not click with the enter key, or control enter, or the space bar and even with the num pad using numpad 0 enter.

So how do you click on a link in that case? 

Thank you

 

Scott

 

Sent from Mail for Windows 10

 



Re: How to click on links when they won't click

Andy
 


Try SHIFT-ENTER.
 
Andy
 

----- Original Message -----
Sent: Wednesday, August 08, 2018 1:20 PM
Subject: [nvda] How to click on links when they won't click

Hi all.

I hope someone can help me here.

Once in a while, more and more lately it seems, I can not click with the enter key, or control enter, or the space bar and even with the num pad using numpad 0 enter.

So how do you click on a link in that case? 

Thank you

 

Scott

 

Sent from Mail for Windows 10

 


Re: How to click on links when they won't click

Jonathan COHN
 

The only option I didn’t see you list was to route the mouse to the navigator item and then click the mouse button.

 

I have seen one style of graphical link that Firefox screen readers can’t seem to use at all.

 

These links have a graphic that is a background image (thereby occupying no real space and then the link is labeled for screen readers with “off screen text”. I think Firefox knows the text is out of the view port but the scrren reader commands to move mouse to content and then click perhaps are trying to move the mouse to the entirely wrong place. On the sites I help with accessibility on, we were able to tell the developers to use an aria-label instead of off screen text and this solved the problem.  But unless you can talk to the developer of the site I guess you can’t go that approach.

In which case the only other solution I can think of is try another browser or screen reader.

 

Take care

!

 

Jonathan Cohn

 

 

From: <nvda@nvda.groups.io> on behalf of Scott VanDeWalle <scottvandewalle2@...>
Reply-To: "nvda@nvda.groups.io" <nvda@nvda.groups.io>
Date: Wednesday, August 8, 2018 at 4:24 PM
To: "nvda@nvda.groups.io" <nvda@nvda.groups.io>
Subject: [nvda] How to click on links when they won't click

 

Hi all.

I hope someone can help me here.

Once in a while, more and more lately it seems, I can not click with the enter key, or control enter, or the space bar and even with the num pad using numpad 0 enter.

So how do you click on a link in that case? 

Thank you

 

Scott

 

Sent from Mail for Windows 10

 


Accessibility check request

Rayn Darren
 

Hi group,

 

I’ve run across a problem and I can’t quite figure out if it’s just me or happens to others. I was on my website, www.dragonsofmyth.com and found NVDA reading  “table”, “table with 1 row and one column”, “table with 3 rows” over and over again, then reading the text on the page. This only happens on specific templates for the site. I know for a fact that there are no tables on the page as I made the site. This is a new problem, that I only noticed yesterday. The only thing I can think of is NVDA is picking up the images that are used to visually delineate between columns and is recognizing them as “tables”. I would really appreciate it if someone, or several someone’s could confirm this? I’m hesitant to alter anything at the moment, as if it’s just me, I’ll deal with it 😊.

 

Thanks so much,

Rayn


Re: Need Mozilla & Thunderbird ftp sites

E.T.
 

<http://ftp.mozilla.org/pub/thunderbird/releases/>

From E.T.'s Keyboard...
Ancient.Aliens@icloud.com
Many believe that we have been visited
in the past. What if it were true?

On 8/8/2018 1:22 PM, Brian K. Lingard wrote:
Hello:
Need the Mozilla & thunderbird ftp sites, unless it is a download option of their http sites.
Brian


Need Mozilla & Thunderbird ftp sites

Brian K. Lingard
 

Hello:

 

Need the Mozilla & thunderbird ftp sites, unless it is a download option of their http sites.

Brian

 


How to click on links when they won't click

Scott VanDeWalle
 

Hi all.

I hope someone can help me here.

Once in a while, more and more lately it seems, I can not click with the enter key, or control enter, or the space bar and even with the num pad using numpad 0 enter.

So how do you click on a link in that case? 

Thank you

 

Scott

 

Sent from Mail for Windows 10

 


Re: Where do I Download Skype 7 From?

Lino Morales
 

I’d download 8.2.5 Brian. Its great and works great with NVDA. Its like using a web page. Eventually MS will kill off Skype Classic.

 

Sent from Mail for Windows 10

 


From: nvda@nvda.groups.io <nvda@nvda.groups.io> on behalf of Brian K. Lingard <bkl@...>
Sent: Wednesday, August 8, 2018 3:24:51 PM
To: nvda@nvda.groups.io
Cc: skypeenglish@...
Subject: [nvda] Where do I Download Skype 7 From?
 

Attempted to download Skype 7 from https://www.skype.com

 

Chose download desktop for windows, only version offered was 8.5.!

 

Is Skype 7 still downloadable? Where may I obtain it?

Brian