Date   

Re: using NVDA with Bluetooth

Luke Robinett <blindgroupsluke@...>
 

Roger that. Thanks. I'm seeing a pattern here -- whereas Apple says "there's an app for that," with NVDA it's "there's an add on for that." :) I'll make sure to check out the available add ons in the future to see if there's something that might solve my need. Thanks again.

Luke

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Jackie
Sent: Wednesday, January 6, 2021 4:25 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] using NVDA with Bluetooth

Luke R, please check the NVDA addons page for 1 called Bluetooth audio.
https://addons.nvda-project.org/addons/BluetoothAudio.en.html

On 1/6/21, Luke Robinett <blindgroupsluke@gmail.com> wrote:
Sorry, I should have been clearer. The AirPods connect via Bluetooth.
They connect fine, it’s just that slight delay and truncating of the
first part of NVDA speech that makes them unusable for me. Would love
if this has been fixed somehow. Thanks.

On Jan 6, 2021, at 2:57 PM, Luke Robinett via groups.io
<blindgroupsluke=gmail.com@groups.io> wrote:

Hey Bob and others,
I’ve tried several times in the recent past to use my Apple AirPods
with my PC and NVDA but it never works very well. There’s a bit of
lag and the first bit of whatever NVDA speaks gets chopped off. Has
this since been fixed, either in windows or NVDA?

On Jan 1, 2021, at 8:58 PM, Bob Cavanaugh <cavbob1993@gmail.com> wrote:

Ah, not sure how I missed this until this morning, but just tried
it and it works brilliantly! Now all I have to decide is which
output to stream to the speaker, Zara or NVDA. I think this is going
to work though. Now all I need is a test server to put into Alta
Cast so I can try this out.

On 12/31/20, Jackie <abletec@gmail.com> wrote:
Bob, please try going to your synthesizer settings
(control+NVDA+s), select your synthesizer, & set your desired audio output device there.

On 12/31/20, Bob Cavanaugh <cavbob1993@gmail.com> wrote:
Hi everyone,
It was a post on this list that inspired me to try using NVDA with
my Bluetooth speaker, and to my surprise, it actually worked. My
question is, can I somehow tell NVDA and only NVDA to output to
the Bluetooth speaker, and have everything else still come through
the computer speakers?
Bob






--
Subscribe to a WordPress for Newbies Mailing List by sending a
message
to:
wp4newbs-request@freelists.org with 'subscribe' in the Subject
field OR by visiting the list page at
http://www.freelists.org/list/wp4newbs
& check out my sites at www.brightstarsweb.com &
www.mysitesbeenhacked.com
















--
Subscribe to a WordPress for Newbies Mailing List by sending a message to:
wp4newbs-request@freelists.org with 'subscribe' in the Subject field OR by visiting the list page at http://www.freelists.org/list/wp4newbs
& check out my sites at www.brightstarsweb.com & www.mysitesbeenhacked.com


Re: Selecting Files

Gene
 

Not control key home. If you move in a folder using control, however you move, nothing is selected or unselected. I'm saying that if you are in a folder, move around in it using the arrow keys, home or end, the file you move to will be selected. If you just open a folder, nothing is selected. You opened a folder, pressed control and moved. Nothing was selected and nothing became selected.
My point is that people need to know that if they have moved in a folder something will be selected and it may not be one of the things they want selected. To make this simple, if you are in a folder that you have moved around in and you want to make sure nothing is selected, press home, then hold control and press the space bar. Now, nothing is selected.

Gene

-----Original Message-----
From: hurrikennyandopo ...
Sent: Wednesday, January 06, 2021 7:42 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Selecting Files

Hi Gene


I just done it to 2 different folders that I went into.


So when I go in see all the files then use ctrl key + home key none is
selected unless I want it selected. This is on windows 10. I am guessing
also the same result will be for all folders with files.


Gene nz


On 7/01/2021 1:00 pm, Gene wrote:
The tutorial omits something important. If you move to the top of the list, the item you have moved to is selected. If you hold control and you don't want it selected, you should press space on that item

Gene
-----Original Message----- From: hurrikennyandopo ...
Sent: Wednesday, January 06, 2021 5:57 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Selecting Files



Hi




is the following tutorial from off my website is what he is wanting. It is for windows explorer.




Selecting and unselecting files in File Explorer
When you go into a folder in file explorer you might only want to copy certain files out of that folder. They might not be together or in a group. To copy only certain files out of the folder if there are heaps of them you will need to do the following.
It would be easier to go to the top of the folder so you can see all the files below. Now, hold down the Ctrl key, then use the Spacebar to select or unselect hightlighted files. Each time you press the Spacebar on an unselected file it will then become selected. Work your way down the files you want and select them with the Spacebar while still holding the Ctrl key. You should hear whether it is selected or unselected. As you arrow down the list of files, to confirm which ones you selected while still holding down the Ctrl key, go to the top of the folder then arrow down the list. If it only says the name of the song it is selected but if it says the name of the song and unselected then you know it is not. Usually the status bar can be read with the NVDA key + End key but not at present.

You can grab an NVDA add-on to tell you how many files have been selected until Windows fixes this problem. You will need to use the NVDA key and the End key to see how many file were selected. Please visit the following link https://www.dropbox.com/s/a935bus11i8y8k0/ZExplorer_1.0_Gen.nvda-addon?dl=0





Gene nz




On 7/01/2021 11:58 am, Sascha Cowley via groups.io wrote:
You should not need to use Ctrl while doing this; Shift + ↓ will extend a continuous selection. Using Ctrl + Shift + ↓ seems to continue a non-continuous selection from the last selected item (IE the one nearest above where you are in the list). With that in mind, are you trying to use Ctrl+Shift+↓ in a list view where nothing is selected? If so, try pressing Space on the item you want to be the first selected item, then using Ctrl+Shift+↓.







Re: Selecting Files

hurrikennyandopo ...
 

Hi Gene


I just done it to 2 different folders that I went into.


So when I go in see all the files then use ctrl key + home key none is selected unless I want it selected. This is on windows 10. I am guessing also the same result will be for all folders with files.


Gene nz

On 7/01/2021 1:00 pm, Gene wrote:
The tutorial omits something important.  If you move to the top of the list, the item you have moved to is selected.  If you hold control and you don't want it selected, you should press space on that item

Gene
-----Original Message----- From: hurrikennyandopo ...
Sent: Wednesday, January 06, 2021 5:57 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Selecting Files



Hi




is the following tutorial from off my website is what he is wanting. It is for windows explorer.




Selecting and unselecting files in File Explorer
When you go into a folder in file explorer you might only want to copy certain files out of that folder. They might not be together or in a group. To copy only certain files out of the folder if there are heaps of them you will need to do the following.
It would be easier to go to the top of the folder so you can see all the files below. Now, hold down the Ctrl key, then use the Spacebar to select or unselect hightlighted files. Each time you press the Spacebar on an unselected file it will then become selected. Work your way down the files you want and select them with the Spacebar while still holding the Ctrl key. You should hear whether it is selected or unselected. As you arrow down the list of files, to confirm which ones you selected while still holding down the Ctrl key, go to the top of the folder then arrow down the list. If it only says the name of the song it is selected but if it says the name of the song and unselected then you know it is not. Usually the status bar can be read with the NVDA key + End key but not at present.

You can grab an NVDA add-on to tell you how many files have been selected until Windows fixes this problem. You will need to use the NVDA key and the End key to see how many file were selected. Please visit the following link https://www.dropbox.com/s/a935bus11i8y8k0/ZExplorer_1.0_Gen.nvda-addon?dl=0





Gene nz




On 7/01/2021 11:58 am, Sascha Cowley via groups.io wrote:
You should not need to use Ctrl while doing this; Shift + ↓ will extend a continuous selection. Using Ctrl + Shift + ↓ seems to continue a non-continuous selection from the last selected item (IE the one nearest above where you are in the list). With that in mind, are you trying to use Ctrl+Shift+↓ in a list view where nothing is selected? If so, try pressing Space on the item you want to be the first selected item, then using Ctrl+Shift+↓.






Re: using NVDA with Bluetooth

Jackie
 

Luke R, please check the NVDA addons page for 1 called Bluetooth audio.
https://addons.nvda-project.org/addons/BluetoothAudio.en.html

On 1/6/21, Luke Robinett <blindgroupsluke@gmail.com> wrote:
Sorry, I should have been clearer. The AirPods connect via Bluetooth. They
connect fine, it’s just that slight delay and truncating of the first part
of NVDA speech that makes them unusable for me. Would love if this has been
fixed somehow. Thanks.

On Jan 6, 2021, at 2:57 PM, Luke Robinett via groups.io
<blindgroupsluke=gmail.com@groups.io> wrote:

Hey Bob and others,
I’ve tried several times in the recent past to use my Apple AirPods with
my PC and NVDA but it never works very well. There’s a bit of lag and the
first bit of whatever NVDA speaks gets chopped off. Has this since been
fixed, either in windows or NVDA?

On Jan 1, 2021, at 8:58 PM, Bob Cavanaugh <cavbob1993@gmail.com> wrote:

Ah, not sure how I missed this until this morning, but just tried it
and it works brilliantly! Now all I have to decide is which output to
stream to the speaker, Zara or NVDA. I think this is going to work
though. Now all I need is a test server to put into Alta Cast so I can
try this out.

On 12/31/20, Jackie <abletec@gmail.com> wrote:
Bob, please try going to your synthesizer settings (control+NVDA+s),
select your synthesizer, & set your desired audio output device there.

On 12/31/20, Bob Cavanaugh <cavbob1993@gmail.com> wrote:
Hi everyone,
It was a post on this list that inspired me to try using NVDA with my
Bluetooth speaker, and to my surprise, it actually worked. My question
is, can I somehow tell NVDA and only NVDA to output to the Bluetooth
speaker, and have everything else still come through the computer
speakers?
Bob






--
Subscribe to a WordPress for Newbies Mailing List by sending a message
to:
wp4newbs-request@freelists.org with 'subscribe' in the Subject field OR
by
visiting the list page at http://www.freelists.org/list/wp4newbs
& check out my sites at www.brightstarsweb.com &
www.mysitesbeenhacked.com















--
Subscribe to a WordPress for Newbies Mailing List by sending a message to:
wp4newbs-request@freelists.org with 'subscribe' in the Subject field OR by
visiting the list page at http://www.freelists.org/list/wp4newbs
& check out my sites at www.brightstarsweb.com & www.mysitesbeenhacked.com


Re: Selecting Files

Joshua Hendrickson
 

I have always selected files using control space bar. I have never
used shift down arrow or anything like that. Also, if you are in a
folder and you want to select all the files in that folder, just hit
control a and then everything in that folder is selected.

On 1/6/21, Gene <gsasner@gmail.com> wrote:
The tutorial omits something important. If you move to the top of the list,

the item you have moved to is selected. If you hold control and you don't
want it selected, you should press space on that item

Gene
-----Original Message-----
From: hurrikennyandopo ...
Sent: Wednesday, January 06, 2021 5:57 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Selecting Files



Hi




is the following tutorial from off my website is what he is wanting. It is
for windows explorer.




Selecting and unselecting files in File Explorer
When you go into a folder in file explorer you might only want to copy
certain files out of that folder. They might not be together or in a group.

To copy only certain files out of the folder if there are heaps of them you

will need to do the following.
It would be easier to go to the top of the folder so you can see all the
files below. Now, hold down the Ctrl key, then use the Spacebar to select or

unselect hightlighted files. Each time you press the Spacebar on an
unselected file it will then become selected. Work your way down the files
you want and select them with the Spacebar while still holding the Ctrl key.

You should hear whether it is selected or unselected. As you arrow down the

list of files, to confirm which ones you selected while still holding down
the Ctrl key, go to the top of the folder then arrow down the list. If it
only says the name of the song it is selected but if it says the name of the

song and unselected then you know it is not. Usually the status bar can be
read with the NVDA key + End key but not at present.

You can grab an NVDA add-on to tell you how many files have been selected
until Windows fixes this problem. You will need to use the NVDA key and the

End key to see how many file were selected. Please visit the following link

https://www.dropbox.com/s/a935bus11i8y8k0/ZExplorer_1.0_Gen.nvda-addon?dl=0





Gene nz




On 7/01/2021 11:58 am, Sascha Cowley via groups.io wrote:
You should not need to use Ctrl while doing this; Shift + ↓ will extend a
continuous selection. Using Ctrl + Shift + ↓ seems to continue a
non-continuous selection from the last selected item (IE the one nearest
above where you are in the list). With that in mind, are you trying to use
Ctrl+Shift+↓ in a list view where nothing is selected? If so, try pressing
Space on the item you want to be the first selected item, then using
Ctrl+Shift+↓.







--
Joshua Hendrickson

Joshua Hendrickson


Re: Selecting Files

Gene
 

The tutorial omits something important. If you move to the top of the list, the item you have moved to is selected. If you hold control and you don't want it selected, you should press space on that item

Gene

-----Original Message-----
From: hurrikennyandopo ...
Sent: Wednesday, January 06, 2021 5:57 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Selecting Files



Hi




is the following tutorial from off my website is what he is wanting. It is for windows explorer.




Selecting and unselecting files in File Explorer
When you go into a folder in file explorer you might only want to copy certain files out of that folder. They might not be together or in a group. To copy only certain files out of the folder if there are heaps of them you will need to do the following.
It would be easier to go to the top of the folder so you can see all the files below. Now, hold down the Ctrl key, then use the Spacebar to select or unselect hightlighted files. Each time you press the Spacebar on an unselected file it will then become selected. Work your way down the files you want and select them with the Spacebar while still holding the Ctrl key. You should hear whether it is selected or unselected. As you arrow down the list of files, to confirm which ones you selected while still holding down the Ctrl key, go to the top of the folder then arrow down the list. If it only says the name of the song it is selected but if it says the name of the song and unselected then you know it is not. Usually the status bar can be read with the NVDA key + End key but not at present.

You can grab an NVDA add-on to tell you how many files have been selected until Windows fixes this problem. You will need to use the NVDA key and the End key to see how many file were selected. Please visit the following link https://www.dropbox.com/s/a935bus11i8y8k0/ZExplorer_1.0_Gen.nvda-addon?dl=0





Gene nz




On 7/01/2021 11:58 am, Sascha Cowley via groups.io wrote:
You should not need to use Ctrl while doing this; Shift + ↓ will extend a continuous selection. Using Ctrl + Shift + ↓ seems to continue a non-continuous selection from the last selected item (IE the one nearest above where you are in the list). With that in mind, are you trying to use Ctrl+Shift+↓ in a list view where nothing is selected? If so, try pressing Space on the item you want to be the first selected item, then using Ctrl+Shift+↓.


Re: Selecting Files

hurrikennyandopo ...
 

Hi


is the following tutorial from off my website is what he is wanting. It is for windows explorer.


Selecting and unselecting files in File Explorer
When you go into a folder in file explorer you might only want to copy certain files out of that folder. They might not be together or in a group. To copy only certain files out of the folder if there are heaps of them you will need to do the following.
It would be easier to go to the top of the folder so you can see all the files below. Now, hold down the Ctrl key, then use the Spacebar to select or unselect hightlighted files. Each time you press the Spacebar on an unselected file it will then become selected. Work your way down the files you want and select them with the Spacebar while still holding the Ctrl key. You should hear whether it is selected or unselected. As you arrow down the list of files, to confirm which ones you selected while still holding down the Ctrl key, go to the top of the folder then arrow down the list. If it only says the name of the song it is selected but if it says the name of the song and unselected then you know it is not. Usually the status bar can be read with the NVDA key + End key but not at present.

You can grab an NVDA add-on to tell you how many files have been selected until Windows fixes this problem. You will need to use the NVDA key and the End key to see how many file were selected. Please visit the following link https://www.dropbox.com/s/a935bus11i8y8k0/ZExplorer_1.0_Gen.nvda-addon?dl=0


Gene nz


On 7/01/2021 11:58 am, Sascha Cowley via groups.io wrote:
You should not need to use Ctrl while doing this; Shift + ↓ will extend a continuous selection. Using Ctrl + Shift + ↓ seems to continue a non-continuous selection from the last selected item (IE the one nearest above where you are in the list). With that in mind, are you trying to use Ctrl+Shift+↓ in a list view where nothing is selected? If so, try pressing Space on the item you want to be the first selected item, then using Ctrl+Shift+↓.


Re: Selecting Files

Gene
 

To select contiguous items, just use shift. To select items that are not contiguous, hold control and down arrow until you get to something you want to select, and press space while still holding shift. Continuing to hold control, down arrow and when you find another file you want to select, press space again. That is how list views work in general. If you are in a list and you have moved so something is already selected and you want to start at the top with nothing selected, move to the top of the list with the up arrow or home. You have moved to the first item in the list. It is now selected. Unselect it with control space. Then, I am assuming you don't want it selected, press control and start down arrowing as I described. If you move to the top of a list and want the first item selected, it already is. If you hold control and down arrow, it will remain selected. it will remain selected if you use shift down arrow as well.

Gene

-----Original Message-----
From: Sascha Cowley via groups.io
Sent: Wednesday, January 06, 2021 4:58 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Selecting Files

You should not need to use Ctrl while doing this; Shift + ↓ will extend a continuous selection. Using Ctrl + Shift + ↓ seems to continue a non-continuous selection from the last selected item (IE the one nearest above where you are in the list). With that in mind, are you trying to use Ctrl+Shift+↓ in a list view where nothing is selected? If so, try pressing Space on the item you want to be the first selected item, then using Ctrl+Shift+↓.


Re: Selecting Files

Gene
 

It’s the wrong command. In a list, when you are selecting using shift, just use shift.

Gene

----Original Message-----
From: Christopher Gray
Sent: Wednesday, January 06, 2021 4:44 PM
To: nvda@groups.io
Subject: [nvda] Selecting Files



Hello:



When I use ctrl+shft+downarrow or ctrl+shft+downarrow to select one or more files, nothing is selected. I have tried changing scroll lock, testing my keyboard under Windows 10 and other MS suggestions but to no avail. Any thoughts here?



Many thanks.



Chris


Re: Selecting Files

benmoxey@...
 

Hi everyone

 

Hold the Shift and use your arrows to select files that are next to each other.

 

If you only want some of the files in a folder, hold Control and use your arrows to move to those files. Keep the Control held down and use Space to select or unselect. Only release the Control when you are done and are ready to copy, cut etc. If you release Control and press one of the arrows, you will lose the selection and will need to start over.

 

Cheers

 

Ben

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Sascha Cowley via groups.io
Sent: Thursday, 7 January 2021 10:00 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Selecting Files

 

Ctrl+↓ moves the focus without affecting the highlight. Do you mean Shift+↓, or am I missing something?


Re: Strategies for navigating YouTube comments using NVDA?

Luke Robinett <blindgroupsluke@...>
 

Thanks for all the great ideas, folks. Turns out I’m already doing a combination of most of these things but did pick up a few tips and tricks. Tony, that plug-in sounds awesome! I will definitely grab that and see if it helps. I found that if I press control end to go to the very bottom of the page and then press shift 2 a couple of times I will find the comments section pretty consistently since it is under a level two heading. Of the two issues I originally brought up, I’d say traversing between the comments is the most annoying. Even if you press G to go to the profile image of each user, there are still numerous elements you have to move pass to get to the actual text of the comment. Thanks again and keep the ideas coming. I’ve already submitted The feedback to Google as I mentioned so hopefully that will help. In the scheme of things I know this isn’t like a critical issue or anything, but I am a big fan of reading and interacting with comments on topics that interest me so it would be nice if that could be made a little easier. :)

On Dec 31, 2020, at 6:08 PM, Sascha Cowley via groups.io <sascha.camille@...> wrote:

Comments are only loaded when you scroll down the page past the video description. Usually, I just rapidly scroll down the page, wait a couple of seconds, then the comments section will be there.
As for navigating comments, I typically use [e] to navigate to the edit field to add your own comment, then use [g] to navigate to each comment, as each begins with a profile picture.


Re: Selecting Files

Ann Byrne
 

When you use ctrl-down arrow, you press spacebar on any file you want to select. If the files are contiguous you can use shift down arrow, but not I think ctrl-shift down arrow.

At 04:49 PM 1/6/2021, you wrote:

Chris,

I usually press control with down arrow to select files contiguously. I'm not familiar with adding the shift key to perform this task, at least if we're talking about File Explorer.



David Goldfield,

Blindness Assistive Technology Specialist

WWW.DavidGoldfield.org



From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Christopher Gray
Sent: Wednesday, January 6, 2021 5:45 PM
To: nvda@groups.io
Subject: [nvda] Selecting Files



Hello:



When I use ctrl+shft+downarrow or ctrl+shft+downarrow to select one or more files, nothing is selected. I have tried changing scroll lock, testing my keyboard under Windows 10 and other MS suggestions but to no avail. Any thoughts here?



Many thanks.



Chris






Re: Selecting Files

Sascha Cowley
 

Ctrl+↓ moves the focus without affecting the highlight. Do you mean Shift+↓, or am I missing something?


Re: using NVDA with Bluetooth

Luke Robinett <blindgroupsluke@...>
 

Sorry, I should have been clearer. The AirPods connect via Bluetooth. They connect fine, it’s just that slight delay and truncating of the first part of NVDA speech that makes them unusable for me. Would love if this has been fixed somehow. Thanks.

On Jan 6, 2021, at 2:57 PM, Luke Robinett via groups.io <blindgroupsluke=gmail.com@groups.io> wrote:

Hey Bob and others,
I’ve tried several times in the recent past to use my Apple AirPods with my PC and NVDA but it never works very well. There’s a bit of lag and the first bit of whatever NVDA speaks gets chopped off. Has this since been fixed, either in windows or NVDA?

On Jan 1, 2021, at 8:58 PM, Bob Cavanaugh <cavbob1993@gmail.com> wrote:

Ah, not sure how I missed this until this morning, but just tried it
and it works brilliantly! Now all I have to decide is which output to
stream to the speaker, Zara or NVDA. I think this is going to work
though. Now all I need is a test server to put into Alta Cast so I can
try this out.

On 12/31/20, Jackie <abletec@gmail.com> wrote:
Bob, please try going to your synthesizer settings (control+NVDA+s),
select your synthesizer, & set your desired audio output device there.

On 12/31/20, Bob Cavanaugh <cavbob1993@gmail.com> wrote:
Hi everyone,
It was a post on this list that inspired me to try using NVDA with my
Bluetooth speaker, and to my surprise, it actually worked. My question
is, can I somehow tell NVDA and only NVDA to output to the Bluetooth
speaker, and have everything else still come through the computer
speakers?
Bob






--
Subscribe to a WordPress for Newbies Mailing List by sending a message to:
wp4newbs-request@freelists.org with 'subscribe' in the Subject field OR by
visiting the list page at http://www.freelists.org/list/wp4newbs
& check out my sites at www.brightstarsweb.com & www.mysitesbeenhacked.com












Re: Selecting Files

Sascha Cowley
 

You should not need to use Ctrl while doing this; Shift + ↓ will extend a continuous selection. Using Ctrl + Shift + ↓ seems to continue a non-continuous selection from the last selected item (IE the one nearest above where you are in the list). With that in mind, are you trying to use Ctrl+Shift+↓ in a list view where nothing is selected? If so, try pressing Space on the item you want to be the first selected item, then using Ctrl+Shift+↓.


Re: using NVDA with Bluetooth

Luke Robinett <blindgroupsluke@...>
 

Hey Bob and others,
I’ve tried several times in the recent past to use my Apple AirPods with my PC and NVDA but it never works very well. There’s a bit of lag and the first bit of whatever NVDA speaks gets chopped off. Has this since been fixed, either in windows or NVDA?

On Jan 1, 2021, at 8:58 PM, Bob Cavanaugh <cavbob1993@gmail.com> wrote:

Ah, not sure how I missed this until this morning, but just tried it
and it works brilliantly! Now all I have to decide is which output to
stream to the speaker, Zara or NVDA. I think this is going to work
though. Now all I need is a test server to put into Alta Cast so I can
try this out.

On 12/31/20, Jackie <abletec@gmail.com> wrote:
Bob, please try going to your synthesizer settings (control+NVDA+s),
select your synthesizer, & set your desired audio output device there.

On 12/31/20, Bob Cavanaugh <cavbob1993@gmail.com> wrote:
Hi everyone,
It was a post on this list that inspired me to try using NVDA with my
Bluetooth speaker, and to my surprise, it actually worked. My question
is, can I somehow tell NVDA and only NVDA to output to the Bluetooth
speaker, and have everything else still come through the computer
speakers?
Bob






--
Subscribe to a WordPress for Newbies Mailing List by sending a message to:
wp4newbs-request@freelists.org with 'subscribe' in the Subject field OR by
visiting the list page at http://www.freelists.org/list/wp4newbs
& check out my sites at www.brightstarsweb.com & www.mysitesbeenhacked.com









Re: Selecting Files

David Goldfield
 

Chris,

I usually press control with down arrow to select files contiguously. I’m not familiar with adding the shift key to perform this task, at least if we’re talking about File Explorer.

 

David Goldfield,

Blindness Assistive Technology Specialist

WWW.DavidGoldfield.org

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Christopher Gray
Sent: Wednesday, January 6, 2021 5:45 PM
To: nvda@groups.io
Subject: [nvda] Selecting Files

 

Hello:

 

When I use ctrl+shft+downarrow or ctrl+shft+downarrow to select one or more files, nothing is selected.  I have tried changing scroll lock, testing my keyboard under Windows 10 and other MS suggestions but to no avail.  Any thoughts here?

 

Many thanks.

 

Chris

 

 


Selecting Files

Christopher Gray
 

Hello:

 

When I use ctrl+shft+downarrow or ctrl+shft+downarrow to select one or more files, nothing is selected.  I have tried changing scroll lock, testing my keyboard under Windows 10 and other MS suggestions but to no avail.  Any thoughts here?

 

Many thanks.

 

Chris

 

 


Re: Add-on version 21.01 released: Enhanced Touch Gestures, Resource Monitor, StationPlaylist, Windows 10 App Essentials #addonrelease

hurrikennyandopo ...
 

Hi


You must have the following add on installed into nvda called add on updater which can be found at https://addons.nvda-project.org/addons/addonUpdater.en.html <https://addons.nvda-project.org/addons/addonUpdater.en.html>

After it has been installed into nvda it will then look for compatible add ons and look for a newer version of that add on.


I think you can also force it to look for updated add ons by going to tools then check for check for add on updates then follow directions.


there are some I guess call third party add ons which will not work with it until a add on author makes it compatible with the add on updater.

I mean by this they may come off other websites.

So they will not be updated.


Gene nz

On 6/01/2021 10:41 pm, aad leeflang wrote:
hello joseph,

i am not so familiar with nvda but i use the station playlist ad-on.
i understand that i can jupdate the ad-on to use it with station playlist 5.30.
you wrote that you can update add-ons by using the updater.
i have been looking at the add-ons in my list but there is no update add-on button there.
can you please tell me how i can update them?

many thanks,
aad leeflang




Re: Add-on version 21.01 released: Enhanced Touch Gestures, Resource Monitor, StationPlaylist, Windows 10 App Essentials #addonrelease

 

Hello,

         I'm not Joseph, but what he's saying is that all add-ons will be checked to see if they are at their latest versions, and you'll be alerted that new updates are available if they are not, if you install the Add-On Updater Add-On.

         It even checks whether it is up to date, and will tell you when a newer version of itself becomes available.  I believe that this functionality will eventually be integrated into the NVDA core code, but until then the easiest way to have something monitor your collection of Add-Ons to make sure you have the latest is to use Add-On Updater.
--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

The depths of denial one can be pushed to by outside forces of disapproval can make you not even recognize yourself to yourself.

       ~ Brian Vogel

 

4481 - 4500 of 84900