Date   

Seika Version 3, 4 and 5 Braille display drivers

Deenadayalan Moodley
 

Hi Quentin,

 

According to the NVDA user guide section 15.11 We need to download the drivers from:

https://en.seika-braille.com/down/index.html

 

When accessing that site and clicking on the Seika-Braille Display Driver for NVDA, Seika Version 3, 4, 5 and Seika80 (BrailleDisplayDrivers) you are asked for a user name and password.  Unfortunately, we cannot download the drivers to get this braille display to work.

 

 

Can you please look in to it?

 

Thanks.

Mr. Deenadayalan Moodley


Re: new member to the group.

Gene
 

I didn't pay enough attention when I found the link.  I read a little of the file and it looked as though it was fine, but I should have looked for the official page because it might be newer and indeed, you said it is.
 
Gene

-----Original Message-----
Sent: Monday, February 22, 2021 4:47 AM
Subject: Re: [nvda] new member to the group.

Sorry, what I meant to say was the page you linked to comes up, but it's not the official page.  One of the first things on the page is a link to the original document they borrowed, but it's an old link which doesn't work.  The page you linked to is dated 2018, so I was suggesting using the official page at: https://github.com/nvaccess/nvda-community/wiki/SwitchingFromJawsToNVDA which is likely more up to date.

Quentin.

On Mon, Feb 22, 2021 at 7:39 PM Gene <gsasner@...> wrote:
I just tried the link and it works.  this appears to be a case where the link may need to be pasted into the browser's address field and not just clicked on.  That's how I tested it now, by pasting it. 
 
I test links before I send them if I find them in searches and this one worked when I tested it by clicking on it as a Google result.  However, based on what you say, I suspect the actual page presents a newer version.
 
Gene
----- Original Message -----
Sent: Monday, February 22, 2021 1:03 AM
Subject: Re: [nvda] new member to the group.

Gene,

Where did you find that link?  I hadn't come across that site before, and its link to the original article is wrong.

The current Switching from Jaws to NVDA guide is here: https://github.com/nvaccess/nvda-community/wiki/SwitchingFromJawsToNVDA and has been updated since that other page was posted.



On Sat, Feb 20, 2021 at 7:54 AM Gene <gsasner@...> wrote:
What makesit look hard to use.  A good deal of what a lot of users do
involves Windows and program commands.  You can do quite a bit if you use a
different screen-reader even if you know nothing about the screen-reader
except for a few commands like read title bar.

As far ass an introduction to NVDA as a JAWS user is concerned, see this
page:
https://gttprogram.blog/2018/12/20/switching-from-jaws-to-nvda-nvaccess-nvda-community-wiki-%C2%B7-github/

Gene
-----Original Message-----
From: Jim Rawls
Sent: Friday, February 19, 2021 2:30 PM
To: nvda@nvda.groups.io
Subject: [nvda] new member to the group.



Hi all, I currently use jaws 18, and think it’s about time I learn how to
use NVDA.

It looks hard to use, but hope it isn’t. so any ideas you can pass along
will be greatly appreciated. Jim










--
Quentin Christensen
Training and Support Manager



--
Quentin Christensen
Training and Support Manager


Re: new member to the group.

Quentin Christensen
 

Sorry, what I meant to say was the page you linked to comes up, but it's not the official page.  One of the first things on the page is a link to the original document they borrowed, but it's an old link which doesn't work.  The page you linked to is dated 2018, so I was suggesting using the official page at: https://github.com/nvaccess/nvda-community/wiki/SwitchingFromJawsToNVDA which is likely more up to date.

Quentin.

On Mon, Feb 22, 2021 at 7:39 PM Gene <gsasner@...> wrote:
I just tried the link and it works.  this appears to be a case where the link may need to be pasted into the browser's address field and not just clicked on.  That's how I tested it now, by pasting it. 
 
I test links before I send them if I find them in searches and this one worked when I tested it by clicking on it as a Google result.  However, based on what you say, I suspect the actual page presents a newer version.
 
Gene
----- Original Message -----
Sent: Monday, February 22, 2021 1:03 AM
Subject: Re: [nvda] new member to the group.

Gene,

Where did you find that link?  I hadn't come across that site before, and its link to the original article is wrong.

The current Switching from Jaws to NVDA guide is here: https://github.com/nvaccess/nvda-community/wiki/SwitchingFromJawsToNVDA and has been updated since that other page was posted.



On Sat, Feb 20, 2021 at 7:54 AM Gene <gsasner@...> wrote:
What makesit look hard to use.  A good deal of what a lot of users do
involves Windows and program commands.  You can do quite a bit if you use a
different screen-reader even if you know nothing about the screen-reader
except for a few commands like read title bar.

As far ass an introduction to NVDA as a JAWS user is concerned, see this
page:
https://gttprogram.blog/2018/12/20/switching-from-jaws-to-nvda-nvaccess-nvda-community-wiki-%C2%B7-github/

Gene
-----Original Message-----
From: Jim Rawls
Sent: Friday, February 19, 2021 2:30 PM
To: nvda@nvda.groups.io
Subject: [nvda] new member to the group.



Hi all, I currently use jaws 18, and think it’s about time I learn how to
use NVDA.

It looks hard to use, but hope it isn’t. so any ideas you can pass along
will be greatly appreciated. Jim










--
Quentin Christensen
Training and Support Manager



--
Quentin Christensen
Training and Support Manager


Re: Question about copy text announcement with NVDA 2020.4

Quentin Christensen
 

There is no keystroke or option to change the functionality - however you can use the clipspeak addon to increase the amount of clipboard functions which are reported: https://addons.nvda-project.org/addons/clipspeak.en.html

Kind regards

Quentin.

On Mon, Feb 22, 2021 at 1:05 PM Louise Pfau <louise.pfau@...> wrote:
Hi.  Does the announcement of what is being copied to the clipboard in NVDA 2020.4 only occur in html environments, and if not, can it be enabled in other environments.  When I looked at the "What's New" section after installing 2020.4, all that was indicated was that the announcement would be made.  This was also true of the beta version.

Thanks,

Louise



--
Quentin Christensen
Training and Support Manager


Re: Big problems with Microsoft word 365

Quentin Christensen
 

As Brian includes as the first step in his troubleshooting guide, have you restarted the PC?  This is particularly important if you have recently updated either NVDA or Office.

Also which exact version of NVDA and which exact build of Office are you using?  For me, running NVDA 2020.4 on Windows 10 (64-bit) Version: 2009, Build: 19042 and using Office 365 (64-bit) Version: 16.0.13628.20346, I can add headings and change font style in Word and it works fine for me.  (which is not to say there may not be an error, just, if there is, it must not be happening for everyone in every situation).

A couple of other things to note:
- The shortcut for setting heading level 1 in Word is control+alt+1.  Alt+1 runs the first item on the Quick Access Toolbar (which I believe is toggling autosave on and off).

- NVDA does not report style changes by default.  Press NVDA+control+d to open NVDA's document formatting settings, tab to "Style" and press spacebar to check this checkbox.  Press ENTER to close the settings, and NVDA+control+c to save the settings.

Also, if you have been modifying the settings, have you set NVDA to use UI Automation in Microsoft Word controls?  it's an advanced setting, but if you have, that may make a difference (even if you have, it shouldn't crash NVDA).

Regards

Quentin.

On Sun, Feb 21, 2021 at 8:13 AM Cristina Ebetiuc <ebetiucristina@...> wrote:
Hi!
Thank you. I tried out the solutions and I can change etween browse and focus mode but it does not help. 

Von meinem iPhone gesendet

Am 20.02.2021 um 21:10 schrieb Brian Vogel <britechguy@...>:

Cristina,

         Your last message contained no material from you, just the quotation of my prior post.  I'm presuming you meant to say and/or ask something, so I'm letting you know.

--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

Any idiot can face a crisis. It's the day-to-day living that wears you out.

      ~ Anton Chekhov

 



--
Quentin Christensen
Training and Support Manager


Re: Oddity With NVDA And Thunderbird with Inbox status Line

Ron Canazzi
 

Hi Brian and Group,

Well I was not able to find the single character anywhere by myself. Brian somehow found it somewhere.  In his last message, I copied it and used the speech dictionary to add it and redefine it under the single character setting as unread.  After all this speculation, that seems to have worked.

This issue started with the same Thunderbird that I was using prior to the upgrade to NVDA 2020.4.  So I wouldn't think it was a Thunderbird issue solely.


On 2/21/2021 5:25 PM, Brian Vogel wrote:
Even curiouser, when I'm having NVDA read my immediately prior message, in the web interface, it is saying "teeny tiny down arrow" for that character.

But when I continue on to the one previous to that, when it hits it it announces, "fill down pointing small triangle."

This is really, really weird.  Really weird!
--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

Any idiot can face a crisis. It's the day-to-day living that wears you out.

      ~ Anton Chekhov

 


-- 
They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"


Re: Problem with instalation of Vocalizer driver

Socheat
 

Hi,

Actually, Code Factory also published their new driver. It does work with NVDA 2020.4.

On 2/22/2021 3:55 PM, Tea Turković wrote:
Hi Rui,

many thanks, glad to see you have a newer version of driver than Code factory!

Kind regards,
Tea

2021-02-19 13:42 GMT+01:00, Rui Fontes <rui.fontes@tiflotecnia.com>:
Hello!


Get the most recent version from:

https://www.tiflotecnia.net/Instal/vocalizer_expressive_driver-3.1.2.nvda-addon



Best regards,


Customer support

Tiflotecnia, Lda.


Às 12:36 de 19/02/2021, Tea Turković escreveu:
Hi all,

I am trying to install Vocalizer expressive driver add-on version
3.0.14 on the PC at my job, and I have an issue with instalation of
mentioned add-on.

When I try to install the driver add-on, I get the following message:
Add-on not compatible: Instalation of Vocalizer expressive 1.1 driver
3.0.14 has been blocked. An updated version of this add-on is
required, the minimum add-on API supported by this version of NVDA is
2019.3.

I have NVDA version 2020.4, Windows 10 build 14393.
I have been trying to install this add-on since NVDA 2020.1, but same
message appeared every time.

How can I fix this issue and install the driver?

Many thanks in advance!

Kind regards,
Tea Turkovic









Re: Problem with instalation of Vocalizer driver

Tea Turković
 

Hi Rui,

many thanks, glad to see you have a newer version of driver than Code factory!

Kind regards,
Tea

2021-02-19 13:42 GMT+01:00, Rui Fontes <rui.fontes@tiflotecnia.com>:

Hello!


Get the most recent version from:

https://www.tiflotecnia.net/Instal/vocalizer_expressive_driver-3.1.2.nvda-addon



Best regards,


Customer support

Tiflotecnia, Lda.


Às 12:36 de 19/02/2021, Tea Turković escreveu:
Hi all,

I am trying to install Vocalizer expressive driver add-on version
3.0.14 on the PC at my job, and I have an issue with instalation of
mentioned add-on.

When I try to install the driver add-on, I get the following message:
Add-on not compatible: Instalation of Vocalizer expressive 1.1 driver
3.0.14 has been blocked. An updated version of this add-on is
required, the minimum add-on API supported by this version of NVDA is
2019.3.

I have NVDA version 2020.4, Windows 10 build 14393.
I have been trying to install this add-on since NVDA 2020.1, but same
message appeared every time.

How can I fix this issue and install the driver?

Many thanks in advance!

Kind regards,
Tea Turkovic









Re: new member to the group.

Gene
 

I just tried the link and it works.  this appears to be a case where the link may need to be pasted into the browser's address field and not just clicked on.  That's how I tested it now, by pasting it. 
 
I test links before I send them if I find them in searches and this one worked when I tested it by clicking on it as a Google result.  However, based on what you say, I suspect the actual page presents a newer version.
 
Gene

----- Original Message -----
Sent: Monday, February 22, 2021 1:03 AM
Subject: Re: [nvda] new member to the group.

Gene,

Where did you find that link?  I hadn't come across that site before, and its link to the original article is wrong.

The current Switching from Jaws to NVDA guide is here: https://github.com/nvaccess/nvda-community/wiki/SwitchingFromJawsToNVDA and has been updated since that other page was posted.



On Sat, Feb 20, 2021 at 7:54 AM Gene <gsasner@...> wrote:
What makesit look hard to use.  A good deal of what a lot of users do
involves Windows and program commands.  You can do quite a bit if you use a
different screen-reader even if you know nothing about the screen-reader
except for a few commands like read title bar.

As far ass an introduction to NVDA as a JAWS user is concerned, see this
page:
https://gttprogram.blog/2018/12/20/switching-from-jaws-to-nvda-nvaccess-nvda-community-wiki-%C2%B7-github/

Gene
-----Original Message-----
From: Jim Rawls
Sent: Friday, February 19, 2021 2:30 PM
To: nvda@nvda.groups.io
Subject: [nvda] new member to the group.



Hi all, I currently use jaws 18, and think it’s about time I learn how to
use NVDA.

It looks hard to use, but hope it isn’t. so any ideas you can pass along
will be greatly appreciated. Jim










--
Quentin Christensen
Training and Support Manager


Re: new member to the group.

Gene
 

I found a correct link by a Google search.  I tested it before I sent it.  It may be that I didn't copy the correct link or that for some reason, the link was the incorrect one because the new link wasn't copied when I issued the command.
 
Gene

----- Original Message -----
Sent: Monday, February 22, 2021 1:03 AM
Subject: Re: [nvda] new member to the group.

Gene,

Where did you find that link?  I hadn't come across that site before, and its link to the original article is wrong.

The current Switching from Jaws to NVDA guide is here: https://github.com/nvaccess/nvda-community/wiki/SwitchingFromJawsToNVDA and has been updated since that other page was posted.



On Sat, Feb 20, 2021 at 7:54 AM Gene <gsasner@...> wrote:
What makesit look hard to use.  A good deal of what a lot of users do
involves Windows and program commands.  You can do quite a bit if you use a
different screen-reader even if you know nothing about the screen-reader
except for a few commands like read title bar.

As far ass an introduction to NVDA as a JAWS user is concerned, see this
page:
https://gttprogram.blog/2018/12/20/switching-from-jaws-to-nvda-nvaccess-nvda-community-wiki-%C2%B7-github/

Gene
-----Original Message-----
From: Jim Rawls
Sent: Friday, February 19, 2021 2:30 PM
To: nvda@nvda.groups.io
Subject: [nvda] new member to the group.



Hi all, I currently use jaws 18, and think it’s about time I learn how to
use NVDA.

It looks hard to use, but hope it isn’t. so any ideas you can pass along
will be greatly appreciated. Jim










--
Quentin Christensen
Training and Support Manager


Re: Zoom Enhancements add-on

Gene
 

Don't worry about the compatibility statements unless they are very old, like NVDA 18 or somewhere around there and no later.  Somewhere around NVDA 18 or 19, many add-ons had to be redesigned because the version of Python, (spelling) changed that NVDA uses and is programmed in.  Even if you install an incompatible version, I believe you will be told that it is incompatible.  It won't hurt anything, I'm not sure if it will even install. 
 

Gene
-----Original Message-----
Sent: Sunday, February 21, 2021 10:09 PM
Subject: Re: [nvda] Zoom Enhancements add-on

The issue, as I have stated before, isn't accessing the chat window as
it appears, but rather being alerted somehow that there is something
there for me to access. With NVDA 2020.4 and no add-on, it looks like
the chat messages are not read, but there was only one chat message
tonight and it looks like I caught it right away simply by routinely
checking, but I'd rather not have to constantly check the window.

On 2/21/21, Ann Byrne <annakb@...> wrote:
> alt-h should take you to the chat window.
> At 07:53 PM 2/21/2021, you wrote:
>>Hi all,
>>The meeting I've mentioned before where I will need access to the
>>chats as they come in is tonight. When I posted the question of how to
>>get NVDA to read chats in Zoom, I saw a suggestion of download the
>>Zoom Accessibility Enhancements add-on and toggle all alerts to on. I
>>was going to take that suggestion, but when looking at the page for
>>that add-on, it says the latest version of NVDA it is compatible with
>>is 2020.2, and I'm running 2020.4. Will this work? Since my meeting
>>starts in about 35 minutes, I probably won't download the add-on
>>tonight, but was wondering if it worked.
>>Bob
>>
>>
>>
>
>
>
>
>
>
>





Re: Questions Regarding The Donation Form on Nvaccess.org

Quentin Christensen
 

Cearbhall, re Ireland not coming up on the list, I think you're on the PayPal site by then?  We don't ask for a country ourselves.

Roger, thank you very much for your generous donation, we do very much appreciate it!  If you got *a* receipt then the money should have gone through, but I can check if you need (let me know off-list) - also, if you need a more official looking NV Access receipt on letterhead for whatever reason, let me know and I can organise that too - most people don't need that, which is why we don't send it out by default.

Quentin.

On Sat, Feb 20, 2021 at 10:37 AM Cearbhall O'Meadhra <cearbhall.omeadhra@...> wrote:

That’s fine, Brian, thanks for looking after it!

 

All the best,

 

Cearbhall

 

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Brian Vogel
Sent: Friday, February 19, 2021 9:16 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Making donation

 

Cearbhall,

            Just letting you know that I'm going to merge your question in with the other topic (Questions Regarding the Donation Form on NVAccess.org) about the donation page that's already running from today.  These come up again and again, most often when new releases come out, and I try to keep "a [single] donations page topic" per release cycle where I can.

--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

Any idiot can face a crisis. It's the day-to-day living that wears you out.

      ~ Anton Chekhov

 



--
Quentin Christensen
Training and Support Manager


Re: Questions Regarding The Donation Form on Nvaccess.org

Quentin Christensen
 

Actually if he couldn't donate, I guess it's really OUR punishment!


On Sat, Feb 20, 2021 at 8:12 AM Brian Vogel <britechguy@...> wrote:
On Fri, Feb 19, 2021 at 08:10 AM, David Goldfield wrote:
When I was on the donation page after selecting the Download option I was using a screen reader which was not NVDA.
-
David, you faithless so-and-so!!  Your punishment awaits, and who knows when it will come?!

[Wait, I think it already did.]
--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

Any idiot can face a crisis. It's the day-to-day living that wears you out.

      ~ Anton Chekhov

 



--
Quentin Christensen
Training and Support Manager


Re: new member to the group.

Quentin Christensen
 

Gene,

Where did you find that link?  I hadn't come across that site before, and its link to the original article is wrong.

The current Switching from Jaws to NVDA guide is here: https://github.com/nvaccess/nvda-community/wiki/SwitchingFromJawsToNVDA and has been updated since that other page was posted.



On Sat, Feb 20, 2021 at 7:54 AM Gene <gsasner@...> wrote:
What makesit look hard to use.  A good deal of what a lot of users do
involves Windows and program commands.  You can do quite a bit if you use a
different screen-reader even if you know nothing about the screen-reader
except for a few commands like read title bar.

As far ass an introduction to NVDA as a JAWS user is concerned, see this
page:
https://gttprogram.blog/2018/12/20/switching-from-jaws-to-nvda-nvaccess-nvda-community-wiki-%C2%B7-github/

Gene
-----Original Message-----
From: Jim Rawls
Sent: Friday, February 19, 2021 2:30 PM
To: nvda@nvda.groups.io
Subject: [nvda] new member to the group.



Hi all, I currently use jaws 18, and think it’s about time I learn how to
use NVDA.

It looks hard to use, but hope it isn’t. so any ideas you can pass along
will be greatly appreciated. Jim










--
Quentin Christensen
Training and Support Manager


Re: NVDA keyboard help please

Andre Fisher
 

Hi.

Just as I thought this wasn't possible, because it never used to be, I tried it and it can definitely happen. So, your best bet is to press Windows+B, search for the NVDA icon and click it (Applications or Enter worked on my end, then go to the settings and set up your NVDA modifier key.


Re: Zoom Enhancements add-on

Bhavya shah
 

Dear Bob,

Yes, the Zoom Enhancements add-on works with NVDA 2020.4 at my end. An
additional tip I would give is to use the Speech History add-on;
whenever NVDA reads a chat but I miss it because I am multi-tasking or
don't hear it over the audio of the Zoom call itself, this add-on
allows me to review the last several items in NVDA's speech history,
and even copy it to the clipboard which I can then paste somewhere
convenient to read by line, word or character. It is a bit of a
juggle, and I wish the Zoom chat list was much more screen reader
friendly than it currently is natively, but well.

Thanks.

On 2/21/21, Bob Cavanaugh <cavbob1993@gmail.com> wrote:
The issue, as I have stated before, isn't accessing the chat window as
it appears, but rather being alerted somehow that there is something
there for me to access. With NVDA 2020.4 and no add-on, it looks like
the chat messages are not read, but there was only one chat message
tonight and it looks like I caught it right away simply by routinely
checking, but I'd rather not have to constantly check the window.

On 2/21/21, Ann Byrne <annakb@sbcglobal.net> wrote:
alt-h should take you to the chat window.
At 07:53 PM 2/21/2021, you wrote:
Hi all,
The meeting I've mentioned before where I will need access to the
chats as they come in is tonight. When I posted the question of how to
get NVDA to read chats in Zoom, I saw a suggestion of download the
Zoom Accessibility Enhancements add-on and toggle all alerts to on. I
was going to take that suggestion, but when looking at the page for
that add-on, it says the latest version of NVDA it is compatible with
is 2020.2, and I'm running 2020.4. Will this work? Since my meeting
starts in about 35 minutes, I probably won't download the add-on
tonight, but was wondering if it worked.
Bob











--
Best Regards
Bhavya Shah
Stanford University | Class of 2024
E-mail Address: bhavya.shah125@gmail.com
LinkedIn: https://www.linkedin.com/in/bhavyashah125/


Re: Zoom Enhancements add-on

Bob Cavanaugh <cavbob1993@...>
 

The issue, as I have stated before, isn't accessing the chat window as
it appears, but rather being alerted somehow that there is something
there for me to access. With NVDA 2020.4 and no add-on, it looks like
the chat messages are not read, but there was only one chat message
tonight and it looks like I caught it right away simply by routinely
checking, but I'd rather not have to constantly check the window.

On 2/21/21, Ann Byrne <annakb@sbcglobal.net> wrote:
alt-h should take you to the chat window.
At 07:53 PM 2/21/2021, you wrote:
Hi all,
The meeting I've mentioned before where I will need access to the
chats as they come in is tonight. When I posted the question of how to
get NVDA to read chats in Zoom, I saw a suggestion of download the
Zoom Accessibility Enhancements add-on and toggle all alerts to on. I
was going to take that suggestion, but when looking at the page for
that add-on, it says the latest version of NVDA it is compatible with
is 2020.2, and I'm running 2020.4. Will this work? Since my meeting
starts in about 35 minutes, I probably won't download the add-on
tonight, but was wondering if it worked.
Bob








Question about copy text announcement with NVDA 2020.4

Louise Pfau
 

Hi.  Does the announcement of what is being copied to the clipboard in NVDA 2020.4 only occur in html environments, and if not, can it be enabled in other environments.  When I looked at the "What's New" section after installing 2020.4, all that was indicated was that the announcement would be made.  This was also true of the beta version.

Thanks,

Louise


Re: Zoom Enhancements add-on

Ann Byrne
 

alt-h should take you to the chat window.

At 07:53 PM 2/21/2021, you wrote:
Hi all,
The meeting I've mentioned before where I will need access to the
chats as they come in is tonight. When I posted the question of how to
get NVDA to read chats in Zoom, I saw a suggestion of download the
Zoom Accessibility Enhancements add-on and toggle all alerts to on. I
was going to take that suggestion, but when looking at the page for
that add-on, it says the latest version of NVDA it is compatible with
is 2020.2, and I'm running 2020.4. Will this work? Since my meeting
starts in about 35 minutes, I probably won't download the add-on
tonight, but was wondering if it worked.
Bob



Zoom Enhancements add-on

Bob Cavanaugh <cavbob1993@...>
 

Hi all,
The meeting I've mentioned before where I will need access to the
chats as they come in is tonight. When I posted the question of how to
get NVDA to read chats in Zoom, I saw a suggestion of download the
Zoom Accessibility Enhancements add-on and toggle all alerts to on. I
was going to take that suggestion, but when looking at the page for
that add-on, it says the latest version of NVDA it is compatible with
is 2020.2, and I'm running 2020.4. Will this work? Since my meeting
starts in about 35 minutes, I probably won't download the add-on
tonight, but was wondering if it worked.
Bob

4641 - 4660 of 86599