Date   
Re: NVDA 2019.3 RC 2 is released

Quentin Christensen
 

Hi Raha, I'm not familiar with this add-on, is it listed on https://addons.nvda-project.org/index.en.html ?

NVDA 2019.3 has required most addons to update to Python 3 in order to remain compatible.  You may need to download a new version of the add-on in order to use it with NVDA 2019.3  If there isn't a new version, I would encourage you to write to the add-on author to encourage them to update their add-on.

The add-ons we know the status of are listed on https://addons.nvda-project.org/addons/nvdapy3.en.html  

Kind regards

Quentin.

On Tue, Feb 4, 2020 at 3:25 PM Raha Tehrani <raha.tehrani1362@...> wrote:
Hi Quentin. I updated my NVDA last night. things are all good. but
there's a useful addon named "say product name and version".
unfortunately, it's stopped working since NVDA 2019.3 has come into
being. I hope this helpful addon will soon be fixed.
Do take care and Good luck.

On 2/4/20, Quentin Christensen <quentin@...> wrote:
> Thanks for the report, let me look into that.
>
> Quentin.
>
> On Tue, Feb 4, 2020 at 12:53 PM Cuong Dang Manh <dangmanhcuong@...>
> wrote:
>
>> Hi Quentin
>> I tested on Vietnamese interface, and see that the interface translation
>> is not up to date. For example, name of the vision category used the
>> translated string I commited afew week ago, and I changed the tirm a few
>> day later. This category also exists some untranslated string, but I've
>> translated the interface 100%.
>> Don't know if this will be merged later or not so I report here. Will
>> check and continue reportign if there are any errors.
>> Cuong
>> On 2/4/2020 4:50 AM, Quentin Christensen wrote:
>>
>> Hi everyone,
>>
>> The release candidate (RC) build of NVDA 2019.3 is now available for
>> testing.  We encourage all users to download this RC and provide
>> feedback.
>> This is a release candidate for NVDA 2019.3. Unless any critical bugs are
>> found, this will be identical to the final 2019.3 release.
>>
>> More information and download link is available from:
>> https://www.nvaccess.org/post/nvda-2019-3rc2-now-available-for-testing/
>>
>> --
>> Quentin Christensen
>> Training and Support Manager
>>
>> Web: www.nvaccess.org
>> Training: https://www.nvaccess.org/shop/
>> Certification: https://certification.nvaccess.org/
>> User group: https://nvda.groups.io/g/nvda
>> Facebook: http://www.facebook.com/NVAccess
>> Twitter: @NVAccess <https://twitter.com/NVAccess>
>>
>>
>>
>>
>
> --
> Quentin Christensen
> Training and Support Manager
>
> NVDA 2019.3 rc2 now available for testing:
> https://www.nvaccess.org/post/nvda-2019-3rc2-now-available-for-testing/
>
> Web: www.nvaccess.org
> Training: https://www.nvaccess.org/shop/
> Certification: https://certification.nvaccess.org/
> User group: https://nvda.groups.io/g/nvda
> Facebook: http://www.facebook.com/NVAccess
> Twitter: @NVAccess <https://twitter.com/NVAccess>
>
>
>
>





--
Quentin Christensen
Training and Support Manager


Re: NVDA 2019.3 RC 2 is released

Quentin Christensen
 

Cuong,

Can I please double check - did you check with 2019.3 RC1 or RC2?  We put out RC1 last night, then noticed an issue with translations and that's why RC2 came out so quickly - but there were a few hours in between.  If you used RC1, please try again with RC2 and let me know (or let me know that you were using RC2).

Kind regards

Quentin.

On Tue, Feb 4, 2020 at 12:53 PM Cuong Dang Manh <dangmanhcuong@...> wrote:
Hi Quentin
I tested on Vietnamese interface, and see that the interface translation is not up to date. For example, name of the vision category used the translated string I commited afew week ago, and I changed the tirm a few day later. This category also exists some untranslated string, but I've translated the interface 100%.
Don't know if this will be merged later or not so I report here. Will check and continue reportign if there are any errors.
Cuong
On 2/4/2020 4:50 AM, Quentin Christensen wrote:
Hi everyone,

The release candidate (RC) build of NVDA 2019.3 is now available for testing.  We encourage all users to download this RC and provide feedback. This is a release candidate for NVDA 2019.3. Unless any critical bugs are found, this will be identical to the final 2019.3 release.

More information and download link is available from: https://www.nvaccess.org/post/nvda-2019-3rc2-now-available-for-testing/  

--
Quentin Christensen
Training and Support Manager



--
Quentin Christensen
Training and Support Manager


Add-on Updater 20.02 released #addonrelease

 

Hi all,

 

Add-on Updater 20.02 is now available. This is identical to version 20.01.1 with updated localizations applied.

 

Important: after installing this version and restarting NVDA, NVDA will present a compatibility reminder dialog about various add-ons. Please read the dialog (or listen to the content) carefully and take appropriate action.

 

Cheers,

Joseph

Re: Copy Command Not Echoed

Ishant Rajput <ishantrajput11@...>
 

Hello Glenn, You can use Clipspeak add-on for this.

On 2/4/2020 5:59 AM, Glenn / Lenny wrote:

Hi All,
Although I too find this to be an annoyance, a friend of mine is constantly bothered by it, so he asked me to see if there is a work-around for this.
This is of course, when you do control + C, it says nothing, and you don't really know if your text was copied until you try pasting it elsewhere.
Is there an add-on or a way to make this speak when something gets put into the clipboard?
Thanks.
 
Glenn
-- 
--
With warm regards,
Ishant
Counselor & Trainer @Saksham
M: 9910240310. 
Skype: ishantrajput
"Resistance is futile...but, acceptance is versatile..."

Re: NVDA 2019.3 RC 2 is released

Raha Tehrani
 

Hi Quentin. I updated my NVDA last night. things are all good. but
there's a useful addon named "say product name and version".
unfortunately, it's stopped working since NVDA 2019.3 has come into
being. I hope this helpful addon will soon be fixed.
Do take care and Good luck.

On 2/4/20, Quentin Christensen <quentin@...> wrote:
Thanks for the report, let me look into that.

Quentin.

On Tue, Feb 4, 2020 at 12:53 PM Cuong Dang Manh <@cuongdang>
wrote:

Hi Quentin
I tested on Vietnamese interface, and see that the interface translation
is not up to date. For example, name of the vision category used the
translated string I commited afew week ago, and I changed the tirm a few
day later. This category also exists some untranslated string, but I've
translated the interface 100%.
Don't know if this will be merged later or not so I report here. Will
check and continue reportign if there are any errors.
Cuong
On 2/4/2020 4:50 AM, Quentin Christensen wrote:

Hi everyone,

The release candidate (RC) build of NVDA 2019.3 is now available for
testing. We encourage all users to download this RC and provide
feedback.
This is a release candidate for NVDA 2019.3. Unless any critical bugs are
found, this will be identical to the final 2019.3 release.

More information and download link is available from:
https://www.nvaccess.org/post/nvda-2019-3rc2-now-available-for-testing/

--
Quentin Christensen
Training and Support Manager

Web: www.nvaccess.org
Training: https://www.nvaccess.org/shop/
Certification: https://certification.nvaccess.org/
User group: https://nvda.groups.io/g/nvda
Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess <https://twitter.com/NVAccess>



--
Quentin Christensen
Training and Support Manager

NVDA 2019.3 rc2 now available for testing:
https://www.nvaccess.org/post/nvda-2019-3rc2-now-available-for-testing/

Web: www.nvaccess.org
Training: https://www.nvaccess.org/shop/
Certification: https://certification.nvaccess.org/
User group: https://nvda.groups.io/g/nvda
Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess <https://twitter.com/NVAccess>



Re: Joseph Lee's add-ons and NVDA 2019.3: release schedule for next add-on releases in preparation for 2019.3 stable

David Ingram
 

b keystroke insert+r which I was told is the o c r scan. But the problem is that after I think that the scan is completed, I don't hear anything. That is different when I use jaws to perform the o c r scan I would at least hear different things like the list of buttons and the list of soft synths. I would appreciate any help that you can give in this reguard.

-----Original Message-----
From: Joseph Lee
Sent: Feb 3, 2020 11:53 AM
To: nvda@nvda.groups.io
Subject: [nvda] Joseph Lee's add-ons and NVDA 2019.3: release schedule for next add-on releases in preparation for 2019.3 stable

Hi all,

 

NVDA 2019.3 RC (release candidate) was declared, one of the final betas that will be identical to upcoming NVDA 2019.3 stable release unless critical issues emerge. Therefore I hereby announce the schedule for add-on releases from me that are NVDA 2019.3 compatible (or requires NVDA 2019.3):

 

  • Add-on Updater: version 20.02 will hit the air tomorrow. This is a mandatory update for all Add-on Updater users. Feature set is identical to latest version with localization updates and makes provision to support future NVDA releases. Also, 20.02.x will be the last version to support NVDA 2019.2.1 – a March release will require support for 2019.3 and later.
  • StationPlaylist and Windows 10 App Essentials: 20.02 release for these add-ons will be made available within 48 hours after 2019.3 stable is released. These add-ons require NVDA 2019.3 to install and function, and starting from 20.02, Windows 10 App Essentials will also require Windows 10 Version 1903 (May 2019 Update/build 18362).

 

As for other add-ons such as Resource Monitor, no 20.02 releases for them at the moment; note that all of them require NVDA 2019.3.

 

Special notice for DictationBridge users: version 1.1, compatible with NVDA 2019.3, will be released by end of this week.

 

Related to this: if you visit community add-ons website and select any of my add-ons, you’ll see a link to download an older release supporting NVDA 2019.2.1 or earlier. These links will be removed 30 days after NVDA 2019.3 stable version is released.

 

Cheers,

Joseph

Re: NVDA 2019.3 RC 2 is released

Quentin Christensen
 

Thanks for the report, let me look into that.

Quentin.

On Tue, Feb 4, 2020 at 12:53 PM Cuong Dang Manh <dangmanhcuong@...> wrote:
Hi Quentin
I tested on Vietnamese interface, and see that the interface translation is not up to date. For example, name of the vision category used the translated string I commited afew week ago, and I changed the tirm a few day later. This category also exists some untranslated string, but I've translated the interface 100%.
Don't know if this will be merged later or not so I report here. Will check and continue reportign if there are any errors.
Cuong
On 2/4/2020 4:50 AM, Quentin Christensen wrote:
Hi everyone,

The release candidate (RC) build of NVDA 2019.3 is now available for testing.  We encourage all users to download this RC and provide feedback. This is a release candidate for NVDA 2019.3. Unless any critical bugs are found, this will be identical to the final 2019.3 release.

More information and download link is available from: https://www.nvaccess.org/post/nvda-2019-3rc2-now-available-for-testing/  

--
Quentin Christensen
Training and Support Manager



--
Quentin Christensen
Training and Support Manager


Re: NVDA 2019.3 RC 2 is released

 

Hi Quentin
I tested on Vietnamese interface, and see that the interface translation is not up to date. For example, name of the vision category used the translated string I commited afew week ago, and I changed the tirm a few day later. This category also exists some untranslated string, but I've translated the interface 100%.
Don't know if this will be merged later or not so I report here. Will check and continue reportign if there are any errors.
Cuong

On 2/4/2020 4:50 AM, Quentin Christensen wrote:
Hi everyone,

The release candidate (RC) build of NVDA 2019.3 is now available for testing.  We encourage all users to download this RC and provide feedback. This is a release candidate for NVDA 2019.3. Unless any critical bugs are found, this will be identical to the final 2019.3 release.

More information and download link is available from: https://www.nvaccess.org/post/nvda-2019-3rc2-now-available-for-testing/  

--
Quentin Christensen
Training and Support Manager

Re: NVDA 2019.3 RC 2 is released

Gary Metzler
 

Hi Quentin,

 

It’s working good on my end.

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Quentin Christensen
Sent: Monday, February 3, 2020 7:52 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA 2019.3 RC 2 is released

 

Thanks Rosemarie!

 

On Tue, Feb 4, 2020 at 9:07 AM Rosemarie Chavarria <knitqueen2007@...> wrote:

Hi, Quentin,

 

I just downloaded it and it's working great so-far.

 

Rosemarie

 

 

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Quentin Christensen
Sent: Monday, February 3, 2020 1:51 PM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA 2019.3 RC 2 is released

 

Hi everyone,

 

The release candidate (RC) build of NVDA 2019.3 is now available for testing.  We encourage all users to download this RC and provide feedback. This is a release candidate for NVDA 2019.3. Unless any critical bugs are found, this will be identical to the final 2019.3 release.

 

More information and download link is available from: https://www.nvaccess.org/post/nvda-2019-3rc2-now-available-for-testing/  

 

--

Quentin Christensen
Training and Support Manager

 


 

--

Quentin Christensen
Training and Support Manager

 

Re: Copy Command Not Echoed

Gene
 

Is it updated, or will it be, for the new forthcoming NVDA version?  The Clipspeak page doesn't show anything for a new version under development and the compatibility information says:
2018.3 to 2019.3.
 
What does that mean?  Does that mean the add-on doesn't need any additional work to remain compatible with the soon to be released version of NVDA?
Gene

----- Original Message -----
Sent: Monday, February 03, 2020 6:31 PM
Subject: Re: [nvda] Copy Command Not Echoed

You can install The add-on Clip speak.


On Feb 3, 2020, at 7:29 PM, Glenn / Lenny <glennervin@...> wrote:



Hi All,
Although I too find this to be an annoyance, a friend of mine is constantly bothered by it, so he asked me to see if there is a work-around for this.
This is of course, when you do control + C, it says nothing, and you don't really know if your text was copied until you try pasting it elsewhere.
Is there an add-on or a way to make this speak when something gets put into the clipboard?
Thanks.
 
Glenn

Re: can't read the what's new from the help menu

Quentin Christensen
 

Glad you got it working.  Do let us know if you have any issues with the RC itself.


On Tue, Feb 4, 2020 at 11:30 AM Bobby Vinton <vinton.bobby5277@...> wrote:

Well I got it to work by telling windows what browser to use.  Some times windows doesn't know your default browser.  I want to thank every one on this list for all your help.  Every one was correct.

On 2/3/2020 4:25 PM, Gene wrote:
What happens when you follow a link in an e-mail or type an Internet address in the run dialog and open a web page in that way?  I have always found that help information in NVDA opens using the default browser.  If previous versions of NVDA work properly in this respecgt and this one doesn’t, then there may be a problem with what NVDA does.  If not, and if other things I’ve discussed don’t work properly, then there is a ;problem with Windows not knowing which browser is the default.
 
Gene
----- Original Message -----
Sent: Monday, February 03, 2020 2:14 PM
Subject: Re: [nvda] can't read the what's new from the help menu
 
Hi


Is it associated with the browser or a browser.


What may happen is when you go into the whats new section you might have
to tell it what browser to use and check the box so it does it from then on.


Gene nz


On 4/02/2020 7:31 am, Bobby Vinton wrote:
> Hay I am running nvda 2019 rc 2 and when I try to read the what's new
> with the help menu nvda will just go back to the desk top and not read
> the what's new at all.  I was wondering when you will have this bug
> fixed or did any one know about the issue?
>
>
>
>




--
Quentin Christensen
Training and Support Manager

Re: NVDA 2019.3 RC 2 is released

Quentin Christensen
 

Thanks Rosemarie!


On Tue, Feb 4, 2020 at 9:07 AM Rosemarie Chavarria <knitqueen2007@...> wrote:

Hi, Quentin,

 

I just downloaded it and it's working great so-far.

 

Rosemarie

 

 

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Quentin Christensen
Sent: Monday, February 3, 2020 1:51 PM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA 2019.3 RC 2 is released

 

Hi everyone,

 

The release candidate (RC) build of NVDA 2019.3 is now available for testing.  We encourage all users to download this RC and provide feedback. This is a release candidate for NVDA 2019.3. Unless any critical bugs are found, this will be identical to the final 2019.3 release.

 

More information and download link is available from: https://www.nvaccess.org/post/nvda-2019-3rc2-now-available-for-testing/  

 

--

Quentin Christensen
Training and Support Manager

 



--
Quentin Christensen
Training and Support Manager

Re: Copy Command Not Echoed

 

Yes:  https://addons.nvda-project.org/addons/clipspeak.en.html

I would also suggest that when people want to know whether there's an NVDA add-on that they might want to look at the NVDA Add-Ons Page to find out - FIRST.  That's why it exists.
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Power is being told you're not loved and not being destroyed by it.

       ~ Madonna

 

 

Re: Copy Command Not Echoed

Cecelia Rodriguez
 

You can install The add-on Clip speak.


On Feb 3, 2020, at 7:29 PM, Glenn / Lenny <glennervin@...> wrote:



Hi All,
Although I too find this to be an annoyance, a friend of mine is constantly bothered by it, so he asked me to see if there is a work-around for this.
This is of course, when you do control + C, it says nothing, and you don't really know if your text was copied until you try pasting it elsewhere.
Is there an add-on or a way to make this speak when something gets put into the clipboard?
Thanks.
 
Glenn

Accessibility issue with debotnet

William Wong
 

Hi,

        debotnet is an open source software that can configure to enhance the security and privacy of win 10, and can perform some specific tasks that is not straight forward under win 10.

When I use the app  I came across with accessibility issue, and reported to the authoer on github.

However the author stated that /she has no idea on how to address this issue.

I here post the respective issue link, https://github.com/mirinsoft/debotnet/issues/25#issuecomment-581394577


anyone know how to explain to software author on how to fix these accessibility issue.

Re: can't read the what's new from the help menu

Bobby Vinton
 

Well I got it to work by telling windows what browser to use.  Some times windows doesn't know your default browser.  I want to thank every one on this list for all your help.  Every one was correct.

On 2/3/2020 4:25 PM, Gene wrote:
What happens when you follow a link in an e-mail or type an Internet address in the run dialog and open a web page in that way?  I have always found that help information in NVDA opens using the default browser.  If previous versions of NVDA work properly in this respecgt and this one doesn’t, then there may be a problem with what NVDA does.  If not, and if other things I’ve discussed don’t work properly, then there is a ;problem with Windows not knowing which browser is the default.
 
Gene
----- Original Message -----
Sent: Monday, February 03, 2020 2:14 PM
Subject: Re: [nvda] can't read the what's new from the help menu
 
Hi


Is it associated with the browser or a browser.


What may happen is when you go into the whats new section you might have
to tell it what browser to use and check the box so it does it from then on.


Gene nz


On 4/02/2020 7:31 am, Bobby Vinton wrote:
> Hay I am running nvda 2019 rc 2 and when I try to read the what's new
> with the help menu nvda will just go back to the desk top and not read
> the what's new at all.  I was wondering when you will have this bug
> fixed or did any one know about the issue?
>
>
>
>


Copy Command Not Echoed

Glenn / Lenny
 


Hi All,
Although I too find this to be an annoyance, a friend of mine is constantly bothered by it, so he asked me to see if there is a work-around for this.
This is of course, when you do control + C, it says nothing, and you don't really know if your text was copied until you try pasting it elsewhere.
Is there an add-on or a way to make this speak when something gets put into the clipboard?
Thanks.
 
Glenn

Re: can't read the what's new from the help menu

Rosemarie Chavarria
 

It works fine here too. I'm using waterfox.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of ben
Sent: Monday, February 3, 2020 12:51 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] can't read the what's new from the help menu

It works fine here.


The page opens right up in Firefox.


Ben

On 2/3/2020 2:14 PM, hurrikennyandopo ... wrote:
Hi


Is it associated with the browser or a browser.


What may happen is when you go into the whats new section you might
have to tell it what browser to use and check the box so it does it
from then on.


Gene nz


On 4/02/2020 7:31 am, Bobby Vinton wrote:
Hay I am running nvda 2019 rc 2 and when I try to read the what's new
with the help menu nvda will just go back to the desk top and not
read the what's new at all. I was wondering when you will have this
bug fixed or did any one know about the issue?




Re: NVDA 2019.3 RC 2 is released

Sarah k Alawami
 

I just contacted the guys who did win wizard so we'll see if they can make the add on work with nvda 19.3.

Thanks and can't wait to test this, in portable form right now.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.

to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on [twitch.](twitch.tv/ke7zum] Feel free to give the channel a follow and see what is up there.

Finally, to become a patron and help support the podcast go here

On 3 Feb 2020, at 13:50, Quentin Christensen wrote:

Hi everyone,

The release candidate (RC) build of NVDA 2019.3 is now available for testing.  We encourage all users to download this RC and provide feedback. This is a release candidate for NVDA 2019.3. Unless any critical bugs are found, this will be identical to the final 2019.3 release.

More information and download link is available from: https://www.nvaccess.org/post/nvda-2019-3rc2-now-available-for-testing/  

--
Quentin Christensen
Training and Support Manager

Re: NVDA 2019.3 RC 2 is released

Rosemarie Chavarria
 

Hi, Quentin,

 

I just downloaded it and it's working great so-far.

 

Rosemarie

 

 

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Quentin Christensen
Sent: Monday, February 3, 2020 1:51 PM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA 2019.3 RC 2 is released

 

Hi everyone,

 

The release candidate (RC) build of NVDA 2019.3 is now available for testing.  We encourage all users to download this RC and provide feedback. This is a release candidate for NVDA 2019.3. Unless any critical bugs are found, this will be identical to the final 2019.3 release.

 

More information and download link is available from: https://www.nvaccess.org/post/nvda-2019-3rc2-now-available-for-testing/  

 

--

Quentin Christensen
Training and Support Manager