Date   
Re: Changing speech rate not working

Gene
 

That is true up to a point.  But NVDA key describer doesn't read many combinations of keys in a useful manner.  It has nothing to do with whether it recognizes the keys.  Try shift dash or shift equals or shift plus number keys on the main keyboard.  it does no useful good when it announces such things as shift plus 5.  Of course its shift plus five.  But what character does shift plus 5 cause to be typed?  Its percent, but input mode doesn't tell you that.  Hearing shift plus dash is similarly next to useless.  This is something that should be corrected.
 
Gene

----- Original Message -----
Sent: Tuesday, March 03, 2020 5:40 PM
Subject: Re: [nvda] Changing speech rate not working

To double check what Tyler suggested - if you press NVDA+1 to turn on "Input help", every key or set of keys you press gets read out (rather than doing whatever it normally does) - if you press an NVDA keystroke, such as NVDA+shift+control+down arrow, NVDA will read out the keys AND what function they do.  If your keyboard is only recognising some of the keys, it should read out something like CONTROL+SHIFT+DOWN ARROW or NVDA+SHIFT+DOWN ARROW etc.

Press NVDA+1 to turn input help off again.

Note that you can also adjust speech settings such as rate from NVDA's settings screen.  Press NVDA+control+v to open the settings directly to the speech / voice settings and tab through that screen to the option you want to change.

Regards

Quentin.

On Wed, Mar 4, 2020 at 8:59 AM Tyler Spivey <tspivey@...> wrote:
Try using caps lock instead of insert, or the other insert key.
Some keyboards aren't capable of registering certain combinations of
keys, and yours might be one of them.
If that doesn't work, you can always reassign the gesture.

On 3/3/2020 11:31 AM, Howard Traxler wrote:
> I'm usinng the laptop keyboard setup on my desktop computer.
> ctrl+insert+shift+up makes it faster, but ctrl+insert+shift+down does
> nothing.  Is there a change I need to do?
>
> Thanks.
> On 3/3/2020 1:00 PM, Cecelia Rodriguez wrote:
>> You can use page up
>>> On Mar 1, 2020, at 10:42 PM, Tyler Spivey <tspivey@...> wrote:
>>>
>>> If you're using the laptop layout, try ctrl+insert+shift+up.
>>>
>>>
>>>> On 3/1/2020 6:21 PM, Anna Givens wrote:
>>>> I am doing Control + insert + up arrow to increase speech but it is
>>>> not changing the speech rate.
>>>>
>>>>
>>>> Anna
>>>>
>>>
>>>
>>
>>
>
>
>
>





--
Quentin Christensen
Training and Support Manager


Re: NVDA Crashing while reading Word document

Gene
 

Was it NVDA or the synthesizer?  It would be good to test with a different synthesizer as an easy way to see. 
 
the log would, of course, be important but this may make it easier to figure out, and faster, what is or is probably going on.
 
Gene

----- Original Message -----
Sent: Tuesday, March 03, 2020 1:59 PM
Subject: Re: [nvda] NVDA Crashing while reading Word document

Hi, Quentin and team,
I am currently reading a straightforward Word document which involves some technical information and so I need to arrow back and forth to verify information. NVDA crashed a few times for no apparent reason. Then I found that when I used the "numpad 2" key to identify a character in the text, NVDA crashed. I had to restart NVDA each time. The document was not disturbed nor did I lose my position only NVDA seemed to suffer. When I restarted NVDA there was no longer an active log for the previous fault.

Question: Is there any way to trap the log after a crash?
 

All the best,

Cearbhall

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...


-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Shaun Everiss
Sent: Tuesday, March 3, 2020 6:06 PM
To: nvda@nvda.groups.io
Subject: [nvda] ccleaner new version

Hi all.

Well there is a new version out of ccleaner.

CCleaner hasn't had a new version in ages, however, the following things have been done.

1.  all those nice tweaks in the ccleaner.ini no longer function so you can't manually turn off healthcheck or updater or whatever it is called.

At first there is an announcement when you start.

Don't for any reason interact with it because you will then not be able to close ccleaner, just hit alt f4 and it will just do whatever.

2.  sadly the old options/ lets turn off healthcheck and only use custom cleaning button seems to be skipped over by nvda so I don't know, I may try with another reader and then see if that puts something in the ini file.

3.  healthcheck just like the previous quick clean is a great program, its just completely unusable by us.

They thankfully left custom clean alone, however this is probably it, if they in any way screw up custom clean, then I am going to have to completely abandon ccleaner because I just can't interact with it anymore.

I am seriously thinking about sending a recording to ccleaner support and all that because we can't even navigate these announcements or healthcheck itself, maybe have them set it so its not going to be active anymore or something.

If only we could choose the option that would be a different thing but we can't.

As of now, this ini file is still usefull for its intended purpose of custom cleaning adjustment so you don't have to interact with the inaccessible front panel but thats all.

For now if wanting to do something click either tools for custom clean before you do anything, do not hit anything else other than that.







Re: Changing speech rate not working

Quentin Christensen
 

To double check what Tyler suggested - if you press NVDA+1 to turn on "Input help", every key or set of keys you press gets read out (rather than doing whatever it normally does) - if you press an NVDA keystroke, such as NVDA+shift+control+down arrow, NVDA will read out the keys AND what function they do.  If your keyboard is only recognising some of the keys, it should read out something like CONTROL+SHIFT+DOWN ARROW or NVDA+SHIFT+DOWN ARROW etc.

Press NVDA+1 to turn input help off again.

Note that you can also adjust speech settings such as rate from NVDA's settings screen.  Press NVDA+control+v to open the settings directly to the speech / voice settings and tab through that screen to the option you want to change.

Regards

Quentin.

On Wed, Mar 4, 2020 at 8:59 AM Tyler Spivey <tspivey@...> wrote:
Try using caps lock instead of insert, or the other insert key.
Some keyboards aren't capable of registering certain combinations of
keys, and yours might be one of them.
If that doesn't work, you can always reassign the gesture.

On 3/3/2020 11:31 AM, Howard Traxler wrote:
> I'm usinng the laptop keyboard setup on my desktop computer.
> ctrl+insert+shift+up makes it faster, but ctrl+insert+shift+down does
> nothing.  Is there a change I need to do?
>
> Thanks.
> On 3/3/2020 1:00 PM, Cecelia Rodriguez wrote:
>> You can use page up
>>> On Mar 1, 2020, at 10:42 PM, Tyler Spivey <tspivey@...> wrote:
>>>
>>> If you're using the laptop layout, try ctrl+insert+shift+up.
>>>
>>>
>>>> On 3/1/2020 6:21 PM, Anna Givens wrote:
>>>> I am doing Control + insert + up arrow to increase speech but it is
>>>> not changing the speech rate.
>>>>
>>>>
>>>> Anna
>>>>
>>>
>>>
>>
>>
>
>
>
>





--
Quentin Christensen
Training and Support Manager


Re: NVDA Crashing while reading Word document

Quentin Christensen
 

NVDA keeps its log in the %temp% folder (you can usually get to that either by pressing WINDOWS+R, typing %temp% and pressing ENTER, or from Windows Explorer (WINDOWS+E) press F2 to get to the address bar, type %temp% and press ENTER).

The log for the currently running NVDA (or most recently run copy if NVDA isn't currently running) is nvda.log.  The log from the time before that is nvda-old.log.  So, if NVDA has crashed and you've restarted it, the log from that previous time when it crashed should be nvda-old.log.  Additionally, if NVDA has crashed, there should be a file called nvda_crash.dmp which has a lot of extra information we can use to work out exactly what happened.  If you send us all of those files we can have a look.  If you have a copy of the offending word document you are able to send us, that could be helpful too.

As usual, if you can recreate the issue with NVDA's log level set to "debug" and add-ons disabled, that really helps too.

Quentin.

On Wed, Mar 4, 2020 at 6:59 AM Cearbhall O'Meadhra <cearbhall.omeadhra@...> wrote:
        Hi, Quentin and team,
I am currently reading a straightforward Word document which involves some technical information and so I need to arrow back and forth to verify information. NVDA crashed a few times for no apparent reason. Then I found that when I used the "numpad 2" key to identify a character in the text, NVDA crashed. I had to restart NVDA each time. The document was not disturbed nor did I lose my position only NVDA seemed to suffer. When I restarted NVDA there was no longer an active log for the previous fault.

Question: Is there any way to trap the log after a crash?


All the best,

Cearbhall

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...


-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Shaun Everiss
Sent: Tuesday, March 3, 2020 6:06 PM
To: nvda@nvda.groups.io
Subject: [nvda] ccleaner new version

Hi all.

Well there is a new version out of ccleaner.

CCleaner hasn't had a new version in ages, however, the following things have been done.

1.  all those nice tweaks in the ccleaner.ini no longer function so you can't manually turn off healthcheck or updater or whatever it is called.

At first there is an announcement when you start.

Don't for any reason interact with it because you will then not be able to close ccleaner, just hit alt f4 and it will just do whatever.

2.  sadly the old options/ lets turn off healthcheck and only use custom cleaning button seems to be skipped over by nvda so I don't know, I may try with another reader and then see if that puts something in the ini file.

3.  healthcheck just like the previous quick clean is a great program, its just completely unusable by us.

They thankfully left custom clean alone, however this is probably it, if they in any way screw up custom clean, then I am going to have to completely abandon ccleaner because I just can't interact with it anymore.

I am seriously thinking about sending a recording to ccleaner support and all that because we can't even navigate these announcements or healthcheck itself, maybe have them set it so its not going to be active anymore or something.

If only we could choose the option that would be a different thing but we can't.

As of now, this ini file is still usefull for its intended purpose of custom cleaning adjustment so you don't have to interact with the inaccessible front panel but thats all.

For now if wanting to do something click either tools for custom clean before you do anything, do not hit anything else other than that.










--
Quentin Christensen
Training and Support Manager


Re: NVDA Crashing while reading Word document

Cearbhall O'Meadhra
 

Thanks, Sarah,

 

I did not know about the temp folder. Very useful. I can see the old NVDA log now. Of course, that one is not the one with the crash in it which was quite a few reloads of NVDA ago. Still, I know where to go next time I have a crash.

 

 

All the best,

 

Cearbhall

 

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Sarah k Alawami
Sent: Tuesday, March 3, 2020 9:35 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA Crashing while reading Word document

 

Actualloy do this. Hit windows r, type %temp% hit enter, then look for the old nvda log.

Sarah Alawami, owner of TFFP. . For more info go to our website.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on [twitch.](http://twitch.tv/ke7zum] Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page

Finally, to become a patron and help support the podcast go here

On 3 Mar 2020, at 13:24, Cearbhall O'Meadhra wrote:

Thanks, Sarah,

 

I dont see any temp folder under NVDA menu.

 

 

All the best,

 

Cearbhall

 

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Sarah k Alawami
Sent: Tuesday, March 3, 2020 8:33 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA Crashing while reading Word document

 

Go to the temp folder and look for I think nvda-old.log. You will ge ther ety typing %temp% in the run dialogue.

Take care

Sarah Alawami, owner of TFFP. . For more info go to our website.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on [twitch.](http://twitch.tv/ke7zum] Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page

Finally, to become a patron and help support the podcast go here

On 3 Mar 2020, at 12:02, Cearbhall O'Meadhra wrote:

Hi, Quentin and team,

Apologies to you and to Sean for leaving the unrelated message attached in my previous email.

I am currently reading a straightforward Word document which involves some technical information and so I need to arrow back and forth to verify information. NVDA crashed a few times for no apparent reason. Then I found that when I used the "numpad 2" key to identify a character in the text, NVDA crashed. I had to restart NVDA each time. The document was not disturbed nor did I lose my position only NVDA seemed to suffer. When I restarted NVDA there was no longer an active log for the previous fault.

Question: Is there any way to trap the log after a crash?


All the best,

Cearbhall

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

Re: Changing speech rate not working

Tyler Spivey
 

Try using caps lock instead of insert, or the other insert key.
Some keyboards aren't capable of registering certain combinations of keys, and yours might be one of them.
If that doesn't work, you can always reassign the gesture.

On 3/3/2020 11:31 AM, Howard Traxler wrote:
I'm usinng the laptop keyboard setup on my desktop computer. ctrl+insert+shift+up makes it faster, but ctrl+insert+shift+down does nothing.  Is there a change I need to do?

Thanks.
On 3/3/2020 1:00 PM, Cecelia Rodriguez wrote:
You can use page up
On Mar 1, 2020, at 10:42 PM, Tyler Spivey <tspivey@...> wrote:

If you're using the laptop layout, try ctrl+insert+shift+up.


On 3/1/2020 6:21 PM, Anna Givens wrote:
I am doing Control + insert + up arrow to increase speech but it is not changing the speech rate.


Anna

Re: NVDA Crashing while reading Word document

Sarah k Alawami
 

Actualloy do this. Hit windows r, type %temp% hit enter, then look for the old nvda log.

Sarah Alawami, owner of TFFP. . For more info go to our website.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on [twitch.](http://twitch.tv/ke7zum] Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page

Finally, to become a patron and help support the podcast go here

On 3 Mar 2020, at 13:24, Cearbhall O'Meadhra wrote:

Thanks, Sarah,

 

I dont see any temp folder under NVDA menu.

 

 

All the best,

 

Cearbhall

 

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Sarah k Alawami
Sent: Tuesday, March 3, 2020 8:33 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA Crashing while reading Word document

 

Go to the temp folder and look for I think nvda-old.log. You will ge ther ety typing %temp% in the run dialogue.

Take care

Sarah Alawami, owner of TFFP. . For more info go to our website.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on [twitch.](http://twitch.tv/ke7zum] Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page

Finally, to become a patron and help support the podcast go here

On 3 Mar 2020, at 12:02, Cearbhall O'Meadhra wrote:

Hi, Quentin and team,

Apologies to you and to Sean for leaving the unrelated message attached in my previous email.

I am currently reading a straightforward Word document which involves some technical information and so I need to arrow back and forth to verify information. NVDA crashed a few times for no apparent reason. Then I found that when I used the "numpad 2" key to identify a character in the text, NVDA crashed. I had to restart NVDA each time. The document was not disturbed nor did I lose my position only NVDA seemed to suffer. When I restarted NVDA there was no longer an active log for the previous fault.

Question: Is there any way to trap the log after a crash?


All the best,

Cearbhall

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

Re: NVDA Crashing while reading Word document

Cordelia Scharpf
 

I had this very same problem with Word documents some weeks ago. Now and then, I still run into such problems but cannot replicate a log.

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Cearbhall O'Meadhra
Sent: Tuesday, March 03, 2020 10:25 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA Crashing while reading Word document

 

Thanks, Sarah,

 

I dont see any temp folder under NVDA menu.

 

 

All the best,

 

Cearbhall

 

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Sarah k Alawami
Sent: Tuesday, March 3, 2020 8:33 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA Crashing while reading Word document

 

Go to the temp folder and look for I think nvda-old.log. You will ge ther ety typing %temp% in the run dialogue.

Take care

Sarah Alawami, owner of TFFP. . For more info go to our website.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on [twitch.](http://twitch.tv/ke7zum] Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page

Finally, to become a patron and help support the podcast go here

On 3 Mar 2020, at 12:02, Cearbhall O'Meadhra wrote:

Hi, Quentin and team,

Apologies to you and to Sean for leaving the unrelated message attached in my previous email.

I am currently reading a straightforward Word document which involves some technical information and so I need to arrow back and forth to verify information. NVDA crashed a few times for no apparent reason. Then I found that when I used the "numpad 2" key to identify a character in the text, NVDA crashed. I had to restart NVDA each time. The document was not disturbed nor did I lose my position only NVDA seemed to suffer. When I restarted NVDA there was no longer an active log for the previous fault.

Question: Is there any way to trap the log after a crash?


All the best,

Cearbhall

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

Re: NVDA Crashing while reading Word document

Cearbhall O'Meadhra
 

Thanks, Sarah,

 

I dont see any temp folder under NVDA menu.

 

 

All the best,

 

Cearbhall

 

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Sarah k Alawami
Sent: Tuesday, March 3, 2020 8:33 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA Crashing while reading Word document

 

Go to the temp folder and look for I think nvda-old.log. You will ge ther ety typing %temp% in the run dialogue.

Take care

Sarah Alawami, owner of TFFP. . For more info go to our website.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on [twitch.](http://twitch.tv/ke7zum] Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page

Finally, to become a patron and help support the podcast go here

On 3 Mar 2020, at 12:02, Cearbhall O'Meadhra wrote:

Hi, Quentin and team,

Apologies to you and to Sean for leaving the unrelated message attached in my previous email.

I am currently reading a straightforward Word document which involves some technical information and so I need to arrow back and forth to verify information. NVDA crashed a few times for no apparent reason. Then I found that when I used the "numpad 2" key to identify a character in the text, NVDA crashed. I had to restart NVDA each time. The document was not disturbed nor did I lose my position only NVDA seemed to suffer. When I restarted NVDA there was no longer an active log for the previous fault.

Question: Is there any way to trap the log after a crash?


All the best,

Cearbhall

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

Re: NVDA Crashing while reading Word document

Sarah k Alawami
 

Go to the temp folder and look for I think nvda-old.log. You will ge ther ety typing %temp% in the run dialogue.

Take care

Sarah Alawami, owner of TFFP. . For more info go to our website.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on [twitch.](http://twitch.tv/ke7zum] Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page

Finally, to become a patron and help support the podcast go here

On 3 Mar 2020, at 12:02, Cearbhall O'Meadhra wrote:

Hi, Quentin and team,

Apologies to you and to Sean for leaving the unrelated message attached in my previous email.

I am currently reading a straightforward Word document which involves some technical information and so I need to arrow back and forth to verify information. NVDA crashed a few times for no apparent reason. Then I found that when I used the "numpad 2" key to identify a character in the text, NVDA crashed. I had to restart NVDA each time. The document was not disturbed nor did I lose my position only NVDA seemed to suffer. When I restarted NVDA there was no longer an active log for the previous fault.

Question: Is there any way to trap the log after a crash?


All the best,

Cearbhall

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...


Re: NVDA Crashing while reading Word document

Cearbhall O'Meadhra
 

Hi, Quentin and team,

Apologies to you and to Sean for leaving the unrelated message attached in my previous email.

I am currently reading a straightforward Word document which involves some technical information and so I need to arrow back and forth to verify information. NVDA crashed a few times for no apparent reason. Then I found that when I used the "numpad 2" key to identify a character in the text, NVDA crashed. I had to restart NVDA each time. The document was not disturbed nor did I lose my position only NVDA seemed to suffer. When I restarted NVDA there was no longer an active log for the previous fault.

Question: Is there any way to trap the log after a crash?


All the best,

Cearbhall

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

Re: ccleaner new version

 

The two topics on CCleaner from today have been merged.  Also, insofar as the conversation is about using CCleaner itself, that should occur on the Chat Subgroup.
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Power is being told you're not loved and not being destroyed by it.

       ~ Madonna

 

 

Re: ccleaner new version

molly the blind tech lover
 

Hi . . . Do you mean like that disk clean up utility that Windows 10 has? I've used it before with NVDA, and it works pretty good.

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Shaun Everiss
Sent: Tuesday, March 3, 2020 1:10 PM
To: nvda@nvda.groups.io
Subject: [nvda] adendum to ccleaner

Hi.

Ok its not as bad as I thought.

You need to click the button to select custom clean while in narator scan mode.

Its not ideal but it gets it done.

Re: Changing speech rate not working

Howard Traxler
 

I'm usinng the laptop keyboard setup on my desktop computer. ctrl+insert+shift+up makes it faster, but ctrl+insert+shift+down does nothing.  Is there a change I need to do?

Thanks.

On 3/3/2020 1:00 PM, Cecelia Rodriguez wrote:
You can use page up
On Mar 1, 2020, at 10:42 PM, Tyler Spivey <tspivey@...> wrote:

If you're using the laptop layout, try ctrl+insert+shift+up.


On 3/1/2020 6:21 PM, Anna Givens wrote:
I am doing Control + insert + up arrow to increase speech but it is not changing the speech rate.


Anna

Re: Changing speech rate not working

Cecelia Rodriguez <cessbraille@...>
 

You can use page up

On Mar 1, 2020, at 10:42 PM, Tyler Spivey <tspivey@...> wrote:

If you're using the laptop layout, try ctrl+insert+shift+up.


On 3/1/2020 6:21 PM, Anna Givens wrote:
I am doing Control + insert + up arrow to increase speech but it is not changing the speech rate.


Anna

ccleaner new version

 

Hi.

Ok its not as bad as I thought.

You need to click the button to select custom clean while in narator scan mode.

Its not ideal but it gets it done.

ccleaner new version

 

Hi all.

Well there is a new version out of ccleaner.

CCleaner hasn't had a new version in ages, however, the following things have been done.

1.  all those nice tweaks in the ccleaner.ini no longer function so you can't manually turn off healthcheck or updater or whatever it is called.

At first there is an announcement when you start.

Don't for any reason interact with it because you will then not be able to close ccleaner, just hit alt f4 and it will just do whatever.

2.  sadly the old options/ lets turn off healthcheck and only use custom cleaning button seems to be skipped over by nvda so I don't know, I may try with another reader and then see if that puts something in the ini file.

3.  healthcheck just like the previous quick clean is a great program, its just completely unusable by us.

They thankfully left custom clean alone, however this is probably it, if they in any way screw up custom clean, then I am going to have to completely abandon ccleaner because I just can't interact with it anymore.

I am seriously thinking about sending a recording to ccleaner support and all that because we can't even navigate these announcements or healthcheck itself, maybe have them set it so its not going to be active anymore or something.

If only we could choose the option that would be a different thing but we can't.

As of now, this ini file is still usefull for its intended purpose of custom cleaning adjustment so you don't have to interact with the inaccessible front panel but thats all.

For now if wanting to do something click either tools for custom clean before you do anything, do not hit anything else other than that.

Re: Is there a 2019.2.1 version of the Control Usage Assistant. Add on available?

Luke
 

Hi! Thanks for the quick response and thanks for the link!

On Mar 3, 2020, at 11:55 AM, Joseph Lee <joseph.lee22590@...> wrote:



Hi,

Yes:

https://github.com/josephsl/controlUsageAssistant/releases/download/19.11/controlUsageAssistant-19.11.nvda-addon

Important note: 2019.2.1 compatible version has been removed from community add-ons website, and this decision is intentional from yours truly (the author of Control Usage Assistant).

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Luke
Sent: Tuesday, March 3, 2020 8:36 AM
To: nvda@nvda.groups.io
Subject: [nvda] Is there a 2019.2.1 version of the Control Usage Assistant. Add on available?

 

Hi! I tried this Add on out on the 2019.3.1 desktop version of NVDA  a couple days ago. I have a portable version of NVDA on a thumb drive using 2019.2.1 and I was wondering if there is a 2019.2.1 version still around or am I out of luck? It’s not a big deal if the earlier version is not available. I did check the NVDA add ons page and it has the 2019.3.1 and up, which you can find here  https://addons.nvda-project.org/addons/controlUsageAssistant.ja.html  

 

Re: Is there a 2019.2.1 version of the Control Usage Assistant. Add on available?

 

Hi,

Yes:

https://github.com/josephsl/controlUsageAssistant/releases/download/19.11/controlUsageAssistant-19.11.nvda-addon

Important note: 2019.2.1 compatible version has been removed from community add-ons website, and this decision is intentional from yours truly (the author of Control Usage Assistant).

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Luke
Sent: Tuesday, March 3, 2020 8:36 AM
To: nvda@nvda.groups.io
Subject: [nvda] Is there a 2019.2.1 version of the Control Usage Assistant. Add on available?

 

Hi! I tried this Add on out on the 2019.3.1 desktop version of NVDA  a couple days ago. I have a portable version of NVDA on a thumb drive using 2019.2.1 and I was wondering if there is a 2019.2.1 version still around or am I out of luck? It’s not a big deal if the earlier version is not available. I did check the NVDA add ons page and it has the 2019.3.1 and up, which you can find here  https://addons.nvda-project.org/addons/controlUsageAssistant.ja.html  

 

Re: Transfering configuration profile settings from a portable copy to an installed copy?

Akshaya Choudhary
 

Alright guys, the issue got resolved. I managed to have an installed copy with the desired settings from the portable copy. Thank you everyone for their suggestions, they really helped.
--
Regards,
Sociohack