Gene,

I am not sure about this, cause Facebook had been altering its design
this or last month, which IE may have bben working well with the old
site, but not the current site.

Joseph and lister

Just tried the Control+x command on Jart, but no go! It doesn’t say Cut text. I again went into NVDA+n; p for Options, and N to get into the Input Gestures area; from there into Clipboard. I arrow down to where it says Cut, and it says one of one Control+x, thus I can’t get why isn’t it saying Cut text if the option is set up right? Any other ideas aside from deleting and reassigning Control+x?

                                                                                              Enviado desde Correo para Windows 10

Hi,

Hmmm, I think I know why. Can you tell us exactly how you are doing this – that is, tell us how to reproduce the issue? Only then I will tell you what’s happened.

Cheers,

Joseph

And which is what I have as well installed since yesterday. Remember I use Windows in Spanish, thus I went into check within the Clipboard subsection ofInput Gestures, and the Control+x is as it should.

                                                                                              Enviado desde Correo para Windows 10

Gene,

        I omitted that the version currently downloading from the official add-on page you supplied, https://addons.nvda-project.org/addons/clipspeak.en.html, is ClipSpeak 1.1, which is what Luke stated he just downloaded in an earlier post.
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Science has become just another voice in the room; it has lost its platform.  Now, you simply declare your own truth.

      ~ Dr. Paul A. Offit, in New York Times article, How Anti-Vaccine Sentiment Took Hold in the United States, September 23, 2019

Here’s the log hoping it helps seeing where the problem lides at my end, in that ClipSpeak doesn’t say Cut text

INFO - __main__ (17:07:53.994) - MainThread (20736):

Starting NVDA version 2020.1

INFO - core.main (17:07:54.240) - MainThread (20736):

Config dir: C:\Users\gerac\AppData\Roaming\nvda

INFO - config.ConfigManager._loadConfig (17:07:54.240) - MainThread (20736):

Loading config: C:\Users\gerac\AppData\Roaming\nvda\nvda.ini

INFO - core.main (17:07:54.445) - MainThread (20736):

Using Windows version 10.0.19041 workstation

INFO - core.main (17:07:54.445) - MainThread (20736):

Using Python version 3.7.7 (tags/v3.7.7:d7c567b08f, Mar 10 2020, 09:44:33) [MSC v.1900 32 bit (Intel)]

INFO - core.main (17:07:54.445) - MainThread (20736):

Using comtypes version 1.1.7

INFO - core.main (17:07:54.445) - MainThread (20736):

Using configobj version 5.1.0 with validate version 1.0.1

INFO - synthDriverHandler.setSynth (17:07:55.447) - MainThread (20736):

Loaded synthDriver vocalizer_expressive

INFO - core.main (17:07:55.447) - MainThread (20736):

Using wx version 4.0.3 msw (phoenix) wxWidgets 3.0.5 with six version 1.12.0

INFO - brailleInput.initialize (17:07:55.451) - MainThread (20736):

Braille input initialized

INFO - braille.initialize (17:07:55.454) - MainThread (20736):

Using liblouis version 3.12.0

INFO - braille.initialize (17:07:55.461) - MainThread (20736):

Using pySerial version 3.4

INFO - braille.BrailleHandler.setDisplayByName (17:07:55.469) - MainThread (20736):

Loaded braille display driver noBraille, current display has 0 cells.

INFO - core.main (17:07:55.810) - MainThread (20736):

Java Access Bridge support initialized

INFO - _UIAHandler.UIAHandler.MTAThreadFunc (17:07:55.833) - _UIAHandler.UIAHandler.MTAThread (16252):

UIAutomation: IUIAutomation6

WARNING - external:vlc_settingsHandler.QTInterface._loadRecentFiles (17:07:58.636) - MainThread (20736):

Error: number of recent files  and time count are different

INFO - core.main (17:08:00.299) - MainThread (20736):

NVDA initialized

INFO - globalCommands.GlobalCommands.script_navigatorObject_devInfo (17:08:55.812) - MainThread (20736):

Developer info for navigator object:

name: ''

role: ROLE_DOCUMENT

roleText: None

states: STATE_FOCUSABLE, STATE_FOCUSED

isFocusable: True

hasFocus: True

Python object: <NVDAObjects.Dynamic_UIAEditableTextWithSuggestionsMailWordDocumentWordDocumentEditableTextWithAutoSelectDetectionUIA object at 0x089BD950>

Python class mro: (<class 'NVDAObjects.Dynamic_UIAEditableTextWithSuggestionsMailWordDocumentWordDocumentEditableTextWithAutoSelectDetectionUIA'>, <class 'globalPlugins.wintenObjs.UIAEditableTextWithSuggestions'>, <class 'NVDAObjects.behaviors.EditableTextWithSuggestions'>, <class 'nvdaBuiltin.appModules.hxmail.MailWordDocument'>, <class 'NVDAObjects.UIA.wordDocument.WordDocument'>, <class 'UIABrowseMode.UIADocumentWithTableNavigation'>, <class 'documentBase.DocumentWithTableNavigation'>, <class 'NVDAObjects.UIA.wordDocument.WordDocumentNode'>, <class 'NVDAObjects.behaviors.EditableTextWithAutoSelectDetection'>, <class 'NVDAObjects.UIA.UIA'>, <class 'NVDAObjects.window.winword.WordDocument'>, <class 'NVDAObjects.window.Window'>, <class 'NVDAObjects.behaviors.EditableText'>, <class 'editableText.EditableText'>, <class 'NVDAObjects.NVDAObject'>, <class 'documentBase.TextContainerObject'>, <class 'baseObject.ScriptableObject'>, <class 'baseObject.AutoPropertyObject'>, <class 'object'>)

description: ''

location: RectLTWH(left=649, top=129, width=717, height=598)

value: None

appModule: <'hxoutlook' (appName 'hxoutlook', process ID 17896) at address 88b8610>

appModule.productName: 'microsoft.windowscommunicationsapps'

appModule.productVersion: '16005.12827.20400.0'

TextInfo: <class 'NVDAObjects.UIA.wordDocument.WordDocumentTextInfo'>

windowHandle: 1836282

windowClassName: 'Windows.UI.Core.CoreWindow'

windowControlID: 0

windowStyle: 1409286144

extendedWindowStyle: 2621440

windowThreadID: 19868

windowText: 'Correo'

displayText: ''

UIAElement: <POINTER(IUIAutomationElement) ptr=0x730de60 at 8a343f0>

UIA automationID: RootFocusControl

UIA frameworkID:

UIA runtimeID: (42, 1836282, 4, 262503116, 0)

UIA providerDescription: [pid:17896,providerId:0x0 Main(parent link):Unidentified Provider (unmanaged:MSOIMM.dll)]

UIA className: _WwG

UIA patterns available: ScrollPattern, LegacyIAccessiblePattern, TextPattern

                                                                                              Enviado desde Correo para Windows 10

Try with another player. Winamp hates short wave files of under 1 second
or sometimes 2. This has ben a bug for years now.

--

Sarah Alawami, owner of TFFP. . For more info go to our
[website.](http://www.tffppodcast.com)

Check out my [adventures with a shadow
machine.](http://tffppodcast.com/shadow)

to subscribe to the feed click [here](http://feeds.feedburner.com/tffp)
and you can also [follow us on twitter](http://twitter.com/tffppodcast)

Our [discord](http://discord.tffppodcast.com) is where you will know
when we go live on [twitch.](http://twitch.tv/ke7zum) Feel free to give
the channel a follow and see what is up there.

For stream archives, products you can buy and more visit [my main lbry
page](http://lbry.tv/@ke7zum) and my [tffp lbry
page](http://lbry.tv/@tffppodcast) You will also be able to buy some of
my products and eBooks there.

Finally, to become a patron and help support the podcast go
[here](Http://patreon.com/tffppodcast)

On 2 Jul 2020, at 8:38, Bob Jutzi wrote:

Sorry if this is something I missed but after downloading and
extracting the zip, I'm not getting any audio when using Winamp to
play one of these files.

On 7/2/2020 11:30 AM, Brian Vogel wrote:

On Thu, Jul 2, 2020 at 10:09 AM, Gene wrote:

And since the extracted files are just plain wave files, you can
listen to
all of them first.

Yep.  And if you do end up picking and choosing some of them, but
not others, once you've got what you want copied over into C:\program
files (x86)\nvda\waves as replacements, you'd be wise to ZIP up that
folder so that you have it to conveniently unzip at a later date on a
later install of NVDA that has the original sounds.

--

Brian *-* Windows 10 Pro, 64-Bit, Version 1909, Build 18363

*Science has become just another voice in the room; it has lost its
platform.  Now, you simply declare your own truth.*

~ Dr. Paul A. Offit, in New York Times article, How Anti-Vaccine
Sentiment Took Hold in the United States (
https://www.nytimes.com/2019/09/23/health/anti-vaccination-movement-us.html

) , September 23, 2019

On Mon, 6 Jul 2020, Gerardo Corripio wrote:

> And which is what I have as well installed since yesterday. Remember I use Windows in Spanish, thus I went into check within the Clipboard subsection

> ofInput Gestures, and the Control+x is as it should.

So your windows language is set to Spanish. What is your NVDA language set to?

(NVDA+ctrl+G, first element).

With my Windows language set to English, and my NVDA language set to Spanish

(ES), Clipspeak works fine.

Have you checked to be sure the Clipspeak add-on is enabled? If it is enabled,

maybe remove it and download and install it again?

This is all in NVDA+n, T, A, enter (English keys).

Luke

And which is what I have as well installed since yesterday. Remember I use Windows in Spanish, thus I went into check within the Clipboard subsection ofInput Gestures, and the Control+x is as it should.

                                                                                              Enviado desde Correo para Windows 10

Gene,

        I omitted that the version currently downloading from the official add-on page you supplied, https://addons.nvda-project.org/addons/clipspeak.en.html, is ClipSpeak 1.1, which is what Luke stated he just downloaded in an earlier post.
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Science has become just another voice in the room; it has lost its platform.  Now, you simply declare your own truth.

      ~ Dr. Paul A. Offit, in New York Times article, How Anti-Vaccine Sentiment Took Hold in the United States, September 23, 2019

I read the original request as Gene did. I thought it might be
possible to control this either with punctuation level or possibly by
adding a regular expression match for a blank line in the default
dictionary, making its substitution be nothing at all, but neither of those methods seem to work.

If any other regex geeks are reading this, the expression I used to
match a blank line is: ^\s*$ I still have "blank" being announced
when I am down or up arrowing line by line through text.
--

Brian *-* Windows 10 Pro, 64-Bit, Version 1909, Build 18363

*Science has become just another voice in the room; it has lost its
platform. Now, you simply declare your own truth.*

~ Dr. Paul A. Offit, in New York Times article, How Anti-Vaccine
Sentiment Took Hold in the United States (
https://www.nytimes.com/2019/09/23/health/anti-vaccination-movement-us
.html
) , September 23, 2019

And which is what I have as well installed since yesterday. Remember I use Windows in Spanish, thus I went into check within the Clipboard subsection ofInput Gestures, and the Control+x is as it should.

                                                                                              Enviado desde Correo para Windows 10

Gene,

        I omitted that the version currently downloading from the official add-on page you supplied, https://addons.nvda-project.org/addons/clipspeak.en.html, is ClipSpeak 1.1, which is what Luke stated he just downloaded in an earlier post.
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Science has become just another voice in the room; it has lost its platform.  Now, you simply declare your own truth.

      ~ Dr. Paul A. Offit, in New York Times article, How Anti-Vaccine Sentiment Took Hold in the United States, September 23, 2019

I read the original request as Gene did.  I thought it might be possible to
control this either with punctuation level or possibly by adding a regular
expression match for a blank line in the default dictionary, making its
substitution be nothing at all, but neither of those methods seem to work.

If any other regex geeks are reading this, the expression I used to match a
blank line is:  ^\s*$
I still have "blank" being announced when I am down or up arrowing line by
line through text.
--

Brian *-* Windows 10 Pro, 64-Bit, Version 1909, Build 18363

*Science has become just another voice in the room; it has lost its
platform.  Now, you simply declare your own truth.*

~ Dr. Paul A. Offit, in New York Times article, How Anti-Vaccine Sentiment
Took Hold in the United States (
https://www.nytimes.com/2019/09/23/health/anti-vaccination-movement-us.html
) , September 23, 2019

On Mon, 6 Jul 2020, Gerardo Corripio wrote:

> Aside from ClipSpeak, which supposedly tells you when you copy, paste, cut etc., which other AddON or solution is  there? Using ClipSpeak Control+x doesn’t

> say anything here at my end, even though when I’ve gone into Input Gestures area/Clipboard  from withinSettings (its Shortcut is n), and Control+x is

> assigned! Any other thoughts, or Addons I could try that would tell me when I copy, Cut etc?

Gene,

        I omitted that the version currently downloading from the official add-on page you supplied, https://addons.nvda-project.org/addons/clipspeak.en.html, is ClipSpeak 1.1, which is what Luke stated he just downloaded in an earlier post.
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Science has become just another voice in the room; it has lost its platform.  Now, you simply declare your own truth.

      ~ Dr. Paul A. Offit, in New York Times article, How Anti-Vaccine Sentiment Took Hold in the United States, September 23, 2019

 

 

First, you can't use Firefox 51 forever. Old browsers gradually work
with fewer and fewer sites. Try the latest version of Firefox and see
if it crashes or not on your Windows 7 system. You can try the
portable version since that alters nothing on your system. You can
continue to use your beloved years out of date dangerous version if
you wish and evaluate the current portable version. Many people are
using Firefox, the latest one, and I've seen no pattern of complaints.
While I don't use firefox much, I haven't had problems with more recent

Aside from ClipSpeak, which supposedly tells you when you copy, paste, cut etc., which other AddON or solution is  there? Using ClipSpeak Control+x doesn’t
say anything here at my end, even though when I’ve gone into Input Gestures area/Clipboard  from withinSettings (its Shortcut is n), and Control+x is
assigned! Any other thoughts, or Addons I could try that would tell me when I copy, Cut etc?