Date   

Re: create portable copy

Vanessa Ochoa
 

hi Quentin
 is not telling me anything it does not even give me an error message and I am doing everything correct and the folder is blank other times in the past when I would enter arguments in the command line if they were wrong it would give an error message but this is not the case I just tried it in another computer and still have no results I created a blank folder only for this perpose and still no good results
Vanessa!


On Tuesday, November 14, 2017 4:06 PM, Quentin Christensen <quentin@...> wrote:


Hi Vanessa,

Are you getting an error message when you try to create the portable copy?

Firstly, you will need to either be in the directory where the NVDA executable (nvda.exe or the setup file) is located or else type the path to it.  After that, the three arguments are the one telling it to create a portable version, the one telling it you are giving it a path to install to, and then the path itself:


nvda.exe --create-portable --portable-path g:\nvda

Make sure you have the hyphens etc correct too.  I just realised with punctuation set to some you won't get the hyphens just reading that, so it is:


nvda.exe hyphen hyphen create hyphen portable hyphen hyphen portable hyphen path g colon backslash nvda

Kind regards

Quentin.




On Wed, Nov 15, 2017 at 9:48 AM, Gene <gsasner@...> wrote:
As I understand it, you can make a portable copy and place it anywhere, then you can take the portable copy and place it anywhere else, on a thumb drive, an external drive, on a new computer, and it will work.  That's how portable programs are supposed to work.  If it makes it easier, make the portable copy anywhere you want, then copy or cut and paste the folder containing the portable program wherever you like.

Gene
 
----- Original Message -----
Sent: Tuesday, November 14, 2017 4:41 PM
Subject: Re: [nvda] create portable copy

 
Vanessa!



--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 




Re: nvda tickets

 

All I needed to know. Thanks!




On 11/14/2017 7:08 PM, Quentin Christensen wrote:
It looks like you've done everything correct.  I can see your issue here: https://github.com/nvaccess/nvda/issues/7754.

It looks like no-one has commented on it or anything yet, so you likely won't have received any e-mail about it yet.

Kind regards

Quentin.

On Wed, Nov 15, 2017 at 9:55 AM, Governor staten <govsta@...> wrote:

I posted a ticket on the topic of Zoom yesterday. Do we see emails corresponding to our own tickets before someone comments on them? I'm just curious. If I've done something wrong, I'd like to know. I filled it out and then pressed the submit button.




--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


Re: nvda tickets

Quentin Christensen
 

It looks like you've done everything correct.  I can see your issue here: https://github.com/nvaccess/nvda/issues/7754.

It looks like no-one has commented on it or anything yet, so you likely won't have received any e-mail about it yet.

Kind regards

Quentin.

On Wed, Nov 15, 2017 at 9:55 AM, Governor staten <govsta@...> wrote:

I posted a ticket on the topic of Zoom yesterday. Do we see emails corresponding to our own tickets before someone comments on them? I'm just curious. If I've done something wrong, I'd like to know. I filled it out and then pressed the submit button.




--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


Re: create portable copy

Quentin Christensen
 

Hi Vanessa,

Are you getting an error message when you try to create the portable copy?

Firstly, you will need to either be in the directory where the NVDA executable (nvda.exe or the setup file) is located or else type the path to it.  After that, the three arguments are the one telling it to create a portable version, the one telling it you are giving it a path to install to, and then the path itself:


nvda.exe --create-portable --portable-path g:\nvda

Make sure you have the hyphens etc correct too.  I just realised with punctuation set to some you won't get the hyphens just reading that, so it is:


nvda.exe hyphen hyphen create hyphen portable hyphen hyphen portable hyphen path g colon backslash nvda

Kind regards

Quentin.




On Wed, Nov 15, 2017 at 9:48 AM, Gene <gsasner@...> wrote:
As I understand it, you can make a portable copy and place it anywhere, then you can take the portable copy and place it anywhere else, on a thumb drive, an external drive, on a new computer, and it will work.  That's how portable programs are supposed to work.  If it makes it easier, make the portable copy anywhere you want, then copy or cut and paste the folder containing the portable program wherever you like.

Gene
 
----- Original Message -----
Sent: Tuesday, November 14, 2017 4:41 PM
Subject: Re: [nvda] create portable copy

 
Vanessa!




--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


Re: Can I shorten pauses following punctuation?

JM Casey <crystallogic@...>
 

Interesting. I have the same issue with both MS Core and SAPI5 voices. I
believe there are separate .ini files for each. So maybe yours was modified
to get rid of the silence already?

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Ann
Byrne
Sent: November 14, 2017 6:34 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Can I shorten pauses following punctuation?

I switched from the 1 core voices as suggested by another lister. Went to
SAPI 5, and the pauses are cured. The voices sound the same, although maybe
there aren't as many.

So it's solved, or at least fixed.


Re: Can I shorten pauses following punctuation?

Ann Byrne
 

I switched from the 1 core voices as suggested by another lister. Went to SAPI 5, and the pauses are cured. The voices sound the same, although maybe there aren't as many.

So it's solved, or at least fixed.


Terminal Screen Not Refreshing

Gary
 

I am running the latest NVDA on Windows 10 and have an issue I've been sitting on for a while, and probably should have reported sooner.

I rely on SSH for my job since I work for a UNIX shop.  I use Tera Term Pro because it tabs multiple windows, making things much quicker for me.  The problem is that there are times when data does not clear from the terminal screen as it should and new information is simply written over old information.  I use TermPro's clear screen as well as trying Insert+F5, but this does not do anything.

Obviously, it's not all the time with all information; otherwise, it would be unreadable within minutes.  It's just enough to make things confusing for me.

I know this is not a TermPro issue, by itself, because I never experienced this with JAWS; although, I can't rule out it being something between TermPro and NVDA.  Does anyone have any ideas here?  Thanks!


Re: firefox what was the fuss exactly?

 

On 11/14/17, Gene <gsasner@ripco.com> wrote:
There are some sounds that are important because you can't get information
efficiently about something such as a USB connection in other ways. I may
not have made it as clear as I should have in my first message, but I'm
talking specifically about sounds in contexts such as browser sounds, where
the information can be efficiently gotten in other ways. There are
advantages and disadvantages in various browsers but making whether sounds
are available in a browser be a very important factor in determining whether
to use that browser is, in my opinion, emphasizing sounds that are optional
to a far more central position than they should be.

Gene
----- Original Message -----

From: brian
Sent: Tuesday, November 14, 2017 1:07 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] firefox what was the fuss exactly?


I think that the reason that some blind people like sounds is it
gives us a indacation of what's going on just like the sighted can see at
glance. It's like windows sounds. We have the windows music to let us know
that our computer is on. We have other windows sounds like the sound we
hear when we plug a thumbdrive in or unplug it. If we did not hear this
sound we would think that there is a problem but if there was no sound then
how would we know that there was a problem. Sounds may not be necessary but
they can really help us greatly to know what is happening. I don't have my
sounds on in my webie brouser but I would not fault somone if they did. I
do think that it's important to a sound for down loads because if there is a
problem with your internet connection then you would know. Again the
sighted can just look but we can't. Alot of people don't have good internet
and it can and does loose connection quite frequently.

Brian Sackrider




On 11/14/2017 9:04 AM, Gene wrote:

I want to make my position clear and discuss another aspect of the current
situation in this rather long message.

If people want to use sounds, there is nothing wrong with that but you
don't need them and my position is that being so dependent on them that you
make that a major determining factor on what browser to use is being too
dependent. That's my position. I didn't say they are worthless nor that
people shouldn't use them. I'm talking about being too dependent on one
aspect of a program when that aspect isn't central to the program and when
there may be better programs in general that don't have this specific
characteristic.
I'm saying that if someone considers sounds in browsers to be so important
that that is a major factor in deciding what browser to use, I consider that
to be too dependent. There are other efficient ways to tell things when
using a browser. If a page hasn't loaded, you can't move around. Tabbing
or down arrowing once or twice will tell you. I'm not saying, as you said,
that they are pointless. I'm saying that almost anything sounds do, can be
either efficiently inferred or checked by other methods and that changing
from one browser to another based either only or largely on sounds, is
making this one characteristic of a browser too important.

I don't want my position to be misunderstood. If people want to use
sounds, then that's fine; I'm saying that dependence on them to an
excessive degree is not desirable if it leads to decisions on what programs
to use in a certain class when trying to decide between program a and b that
do roughly the same thing. Browsers have various advantages and
disadvantages and sound is only one aspect of a program.
Also, the changes being made in firefox, according to a review I've read,
make it even faster than Chrome. It isn't much faster, at least now, and I
don't think it matters but if people read the article about these changes
posted last week from Marco's Accessibility blog, these changes may result
in screen-readers being far more capable to work on complex pages that have
embedded programs or where the pages are far more interactive than
traditional web pages, and that increasing numbers of web pages are, and
will be more complex over time. Therefore, I find the attitude of blaming
Mozilla for what it says it intends to be only a temporary loss of
performance for blind users, and writing as though they are going to
permanently use a different browser without even seeing the results of the
work being done is disturbing. At the moment, Chrome may be better than
Firefoxs in its latest version because of the changes. But blind people may
be better served by what Mozilla is doing after the initial inconvenience.


How often do sighted people complain about things like road construction
and repair, but would they never use the road again because of the temporary
inconvenience? They may use a different road during the repairs and the
road may even be closed at times, but they return to it when it is in good
order again.

Gene
----- Original Message -----

From: Brian's Mail list account via Groups.Io
Sent: Tuesday, November 14, 2017 3:11 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] firefox what was the fuss exactly?


Well the beta I tried simply refused to say anything but unknown on any
page, though most of the menus still worked.

I'm not inclined to update since I use the sound, particularly the one
when
a page has fully loaded and the one that tells me a link has in fact
activated and of course download complete


I have seen elsewhere where people think these sounds are pointless. I
dispute this as everyone is different and I really only use browsers where
I
can actually hear that things are going on. for example I've always
noticed
that screenreaders sometimes do not figure out the page has loaded, but
navigational sounds does and hence allows me to re focus the
screenreader.
Also I would not know if a download had completed if the download pane
was
hidden without a sound.
Some links click but clickables do not so sometimes you can figure out
what
is which sort of link on a page this way. In a way it would be even better

if button link and clickable had different sounds to save one getting
confused.

I think the list of things some of us want in a browser is obviously going

to be different to what the sighted want, so one will really need somebody

at Mozilla etc to write blind specific add ons for a browser.
Its far easier when trying to teach somebody how to use a browser to be
able to say, if you do not hear x then its not worked.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Shaun Everiss" <sm.everiss@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Monday, November 13, 2017 6:42 PM
Subject: [nvda] firefox what was the fuss exactly?


> Hi.
>
> Well While brousing firefox ftp today I decided to try firefox 57 as it

> was on releases today.
>
> What exactly was the fuss?
>
> Firefox interface loads fast, no lag, but I havn't tried big sites maybe
a
> couple seconds for audiogames forum.
>
> Addons, noscript, aparently this will not work till actual release of
> firefox.
>
> Navigational sounds.
>
> I am trying to find a replacement, the author of this said that because

> the new interface doesn't allow for registry access one can't get the
list
> of events to do things with.
>
> I tried 3 of them so far.
>
> Notification sound, noise and download sound.
>
> Download sound has no options or rather any way I can configure it to
> suit.
>
> Noise has options but there are no default events set and I tried to add

> what I wanted and define its sounds but I can't set values and going to

> its website found that while there is a web version all features are
> basically not there.
>
> Notification sound is another, but its got no options screen.
>
> Something like noise would be fine if it had an default event list which

> just used the windows schemes directly to the files etc.
>
> I only need web navigation start and end, and download complete as a
> start.
>
> If there was a way I could easily add events, or something that would be

> good but I'd like a list for beginners I could import.
>
> Over those though, I did notice and turn on the extra privacy
protection,
> I have left active the unwanted software protection but I heard from
some
> that this can cause problems.
>
> I also read the article about accessibility services and how they can be

> misused.
>
> It does say if you have a compatible jaws or nvda active on your system

> that you should leave this active.
>
> This is interesting, dolphin stuff is not on this list it makes me
wander,
> while I do use dolphin stuff myself for things their web stuff is only
for
> ie and ie 6-8 mainly.
>
> Still its an observation only.
>
> I must say off the bat what I really like about firefox are the easy
> option layouts, I just wish there was a way to extend them to well have

> extras for addons rather than mucking about with the manager.
>
> I do like the fact you can have arrow navigation on.
>
> I did get noscript revived but when I hit a site with scripts on it
never
> actually notified me at all.
>
> I guess I have to fiddle with it, I do hope thatnoscript does go out and

> get released.
>
> Today is the 14th in nz and tomorrow it will be 14th in us and so, I am

> probably going to have to keep firefox 57 loaded though I am tempted to

> drop back to 56.02 for now and get my sounds back.
>
>
>
>
>







Re: can't use the letter K to get from link to link

Rosemarie Chavarria
 

Hi, Gene,

 

I tried checking that box but that didn't work. I'll probably have to have a sighted relative look at it and see what's going on. I wonder if the tech did delete something that NVDA needs.

 

Thank you for trying to help though.

 

Rosemarie

 

 

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Tuesday, November 14, 2017 2:44 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] can't use the letter K to get from link to link

 

In browse mode settings, tab a lot of times until you get to a check box that says, Trap all non-command gestures from reaching the document.

 

If it isn't checked, check it.  Of course, the tech may have done something else or corrupted or deleted something NVDA needs to perform these tasks properly, but this may be the solution.

 

Gene

----- Original Message -----

Sent: Tuesday, November 14, 2017 4:27 PM

Subject: [nvda] can't use the letter K to get from link to link

 

Hi, everyone,

 

Recently I had to have my computer repaired. Yesterday I brought it home from the shop but found that now I can't get to the links list with NVDA f-7 or the letter K. Whoever repaired my computer must have changed some settings on it. I have the proper boxes checked but don't know why this isn't working. Here is what I was trying to do. I wanted to go to the Gmail site to find out if I had messages in my spam folder that aren't spam. When I hit K to go from link to link, all I get is K and nothing else. When I hit NVDA f-7 to go to the links list, I get a message asking if I want to turn on caret browsing. What could bee causing this?

 

Thanks for your help in advance.

 

Rosemarie  


Re: the new firefox quanttum

JM Casey <crystallogic@...>
 

I chose to postpone the update, for now. I may well end up just going for it. It seems that a good number of people are actually ok with using Quantum with their screen-reader already, this before Mozilla makes their improvements in 58, 59 or whatever it is.

 

 

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Scott VanDeWalle
Sent: November 14, 2017 4:43 PM
To: nvda@nvda.groups.io
Subject: [nvda] the new firefox quanttum

 

Hello all.

 

I just installed the new firefox.

The only thing wrong with it as far as I’m concerned is that it is slower.

So for now I’ll either use google chrome or edge as my default browser.

I’m using the new nightly firefox 58, and it is not much better, as promised it would be.

Just my opinions though.

Have a good da y.

 

Scott


nvda tickets

 

I posted a ticket on the topic of Zoom yesterday. Do we see emails corresponding to our own tickets before someone comments on them? I'm just curious. If I've done something wrong, I'd like to know. I filled it out and then pressed the submit button.


Re: create portable copy

Gene
 

As I understand it, you can make a portable copy and place it anywhere, then you can take the portable copy and place it anywhere else, on a thumb drive, an external drive, on a new computer, and it will work.  That's how portable programs are supposed to work.  If it makes it easier, make the portable copy anywhere you want, then copy or cut and paste the folder containing the portable program wherever you like.

Gene
 

----- Original Message -----
Sent: Tuesday, November 14, 2017 4:41 PM
Subject: Re: [nvda] create portable copy

 
Vanessa!


Re: can't use the letter K to get from link to link

Gene
 

In browse mode settings, tab a lot of times until you get to a check box that says, Trap all non-command gestures from reaching the document.
 
If it isn't checked, check it.  Of course, the tech may have done something else or corrupted or deleted something NVDA needs to perform these tasks properly, but this may be the solution.
 
Gene

----- Original Message -----
Sent: Tuesday, November 14, 2017 4:27 PM
Subject: [nvda] can't use the letter K to get from link to link

Hi, everyone,

 

Recently I had to have my computer repaired. Yesterday I brought it home from the shop but found that now I can't get to the links list with NVDA f-7 or the letter K. Whoever repaired my computer must have changed some settings on it. I have the proper boxes checked but don't know why this isn't working. Here is what I was trying to do. I wanted to go to the Gmail site to find out if I had messages in my spam folder that aren't spam. When I hit K to go from link to link, all I get is K and nothing else. When I hit NVDA f-7 to go to the links list, I get a message asking if I want to turn on caret browsing. What could bee causing this?

 

Thanks for your help in advance.

 

Rosemarie  


Re: create portable copy

Vanessa Ochoa
 

 
Vanessa!


Re: create portable copy

Vanessa Ochoa
 

lets try this again in a different way. okay this is what I am talking about I got it from the What's New in NVDA. and if it helps I am using the latest master snapshot • Added new command line parameters to create a portable copy of NVDA. (#6329)
 
Vanessa!


Re: Unveiling Braille Me - World's Most Affordable Smart Braille Display

Sarah k Alawami
 

I don't use 8 dots, never have. In fact on my braille lite I turned that off the first day I got it, tha twas 7  years ago  I no longer have the unit but I hate 8dot braille. JMT though.

On Nov 14, 2017, at 1:29 PM, Steve Nutt <steve@...> wrote:

Hi,

Ah I am with you now, cursor tracking would be essential for me too.

All the best

Steve

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of erik burggraaf
Sent: 14 November 2017 15:22
To: nvda@nvda.groups.io
Subject: Re: [nvda] Unveiling Braille Me - World's Most Affordable Smart Braille Display

Absolutely it does. But it doesn't have cursor tracking. At least I don't see how it can, since there are only six dots.  DotsSeven and eight blink to show the position of the cursor in standard 8 dot Braille configurations.  I could be totally wrong about this of course. Perhaps the entire letter blinks to show the position of the cursor. I feel pretty confident, but I suppose it was not safe to speculate without having seen the device in operation.


On November 14, 2017 10:12:33 AM "Angelo Sonnesso" <asonnesso@...> wrote:

It does have cursor routing buttons.

73 N2DYN Angelo

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of erik burggraaf
Sent: Tuesday, November 14, 2017 8:17 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Unveiling Braille Me - World's Most Affordable Smart Braille Display

I think you have to look at it like this. When a Perkins brailler costs $800, and a refreshable braille display costs $400, the Braille display becomes instantly attractive in learning environments.

Cursor tracking would be nice, but six dots is all you need to start teaching people how to use the code. We streamlined learning of Braille into technology. We substantially reduce paper waste. We slash both the upfront and long-term cost, and we make Braille relevant to Consumers who would otherwise wonder why they are taking the time to learn it.

For myself, I really need 8 dot Computer Braille, and cursor tracking in my classes. So, this device will not be great for me; however, I think it's great that one of these is actually going to hit the market. I hope when they start recovering some of their R&D costs, they will expand the size, add the cursor tracking feature is, and make it a little bit more relevant to Advanced Braille users.


On November 14, 2017 7:29:01 AM "Steve Nutt" <steve@...> wrote:

Hi,

Yeah eight dots isn't there, which makes it a bit half-baked, but it will be nice to have a cheaper option.

All the best

Steve

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Brian's Mail list account via Groups.Io
Sent: 14 November 2017 09:16
To: nvda@nvda.groups.io
Subject: Re: [nvda] Unveiling Braille Me - World's Most Affordable Smart Braille Display

Is this going to be another one like the last el cheapo one that everyone is still waiting to get?

Wee only six dots,  I thought 8 was needed for computer Braille to allow info like cursor position etc.
Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Cristóbal" <crismunoz54@...>
To: <nvda@nvda.groups.io>
Sent: Monday, November 13, 2017 5:14 PM
Subject: Re: [nvda] Unveiling Braille Me - World's Most Affordable Smart Braille Display


It literally says $399.00 in the original email message.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Ann Byrne
Sent: Monday, November 13, 2017 5:28 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Unveiling Braille Me - World's Most Affordable
Smart Braille Display

How affordable is it???
At 07:17 AM 11/13/2017, you wrote:
Hi Josh,
I had been contacted by Shyam from Innovision a couple months ago with
regards to how adding support for a new Braille display driver works
in the case of NVDA. I had redirected Shyam to Jamie or Reef by
providing their e-mail addresses at that point in time. I am unaware
of whether or not he actually followed up with an NV Access staff
member, but what I can safely say is that supporting NVDA was very
much on their minds while developing this affordable Braille display.
Thanks.

On 11/13/17, Josh Kennedy <joshknnd1982@...> wrote:
will this display work with NVDA also?




-------- Forwarded Message --------
Subject:      Unveiling Braille Me - World's Most Affordable Smart
Braille
Display
Date:         Mon, 13 Nov 2017 03:10:09 -0800
From:         Innovision <shyam@...>
To:   joshknnd1982@...



Greetings from Innovision!
This email is in reply to the Pre-order interest survey that you or
a representative from your firm submitted (link -
https://tinyurl.com/BrailleMe-Survey


<https://innovisiontech-dot-yamm-track.appspot.com/Redirect?ukey=1faNF
NvnKA_
4Ij1SFgAV4lloCizIP-yQHxS_P4iDZetA-0&key=YAMMID-71407346&link=https%3A%
2F%2Ft
inyurl.com%2FBrailleMe-Survey>).


Thank you for showing your interest in Innovision
(www.innovisiontech.co

<https://innovisiontech-dot-yamm-track.appspot.com/Redirect?ukey=1faN
F
NvnKA_4Ij1SFgAV4lloCizIP-yQHxS_P4iDZetA-0&key=YAMMID-71407346&link=ht
t
p%3A%2F%2Fwww.innovisiontech.co%2F>)

and our product, BrailleMe - a Smart Braille Display for the
visually impaired community.

I am excited to inform you that we are launching Braille Me,
world's most affordable smart braille display at USD 399/- on the
4th of January celebrating the World Braille Day. Let me give you
an overview of Braille Me.

About Braille Me -

Ever Since Louis Braille invented the wonderful script of Braille,
it has been adopted all across the globe empowering millions of
individuals. Today, after 200 years we are on the verge of a
revolution in Braille. Braille Me, is built to bring digital
braille to everyone immaterial of their geographical, economic or
lingual
background.

It has a six-dot 20-cell braille display, a Perkins-style keypad,
cursor routing buttons and few navigation keys.  It has
capabilities to work as a stand-alone editor and also connect to
smartphones and computers via Bluetooth and USB. It is a balanced
device with core features of a complex notetaker while having the
simplicity of a braille
display.

Braille Me has become possible due to two breakthroughs in
Affordability and multi-language. Braille Me is designed with our
patented Braille cell technology which makes the device
cost-effective by an order of magnitude compared to existing
products and supports more than 40 languages spanning all across
the
globe.

To know more about Braille Me please check our demonstration video:

https://www.youtube.com/watch?v=Fz1cUZcf-1A

<https://innovisiontech-dot-yamm-track.appspot.com/Redirect?ukey=1faN
F
NvnKA_4Ij1SFgAV4lloCizIP-yQHxS_P4iDZetA-0&key=YAMMID-71407346&link=ht
t ps%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DFz1cUZcf-1A>

Also check out our facebook page:
https://www.facebook.com/InnovisionTechnologies/

<https://innovisiontech-dot-yamm-track.appspot.com/Redirect?ukey=1faN
F
NvnKA_4Ij1SFgAV4lloCizIP-yQHxS_P4iDZetA-0&key=YAMMID-71407346&link=ht
t ps%3A%2F%2Fwww.facebook.com%2FInnovisionTechnologies%2F>

Reaching out:

We are eager to serve you and look forward to engaging with you.
Currently, we are looking for partners who can help us in the
distribution and training in your state/country. Please let us know
if you are part of or are in touch with any Institute for Visually
impaired, commercial distributors of disability aids or NGOs
working in your area.
Your help in identifying key partners would go a long way in
expediting distribution of Braille Me in your locality.

We hope you would join us in this effort to bring digital braille
to every student and professional in need.
In case you have any queries, please feel free to reach out to our
team at customercare@...
<mailto:info@...> We look forward to hearing from you.
--
Warm Regards
Shyam Shah
CEO & Co-founder
INNOVISION
www.innovisiontech.co

<https://innovisiontech-dot-yamm-track.appspot.com/Redirect?ukey=1faN
F
NvnKA_4Ij1SFgAV4lloCizIP-yQHxS_P4iDZetA-0&key=YAMMID-71407346&link=ht
t
p%3A%2F%2Fwww.innovisiontech.co%2F>



Inline image 1
DISCLAIMER: This email (including any attachments) is intended for
the sole use of the intended recipient/s and may contain material
that is CONFIDENTIAL AND PRIVATE COMPANY INFORMATION. Any review or
reliance by others or copying or distribution or forwarding of any
or all of the contents in this message is STRICTLY PROHIBITED. The
opinions expressed are those of the sender and do not necessarily
reflect those of the Company. If you are not the intended
recipient, please contact the sender by email and delete all
copies; your cooperation in this regard is appreciated.

beacon



--
Best Regards
Bhavya Shah

Blogger at Hiking Across Horizons:
https://bhavyashah125.wordpress.com/

Contacting Me
E-mail Address: bhavya.shah125@... Follow me on Twitter
@BhavyaShah125 or www.twitter.com/BhavyaShah125 Mobile Number: +91
7506221750






































can't use the letter K to get from link to link

Rosemarie Chavarria
 

Hi, everyone,

 

Recently I had to have my computer repaired. Yesterday I brought it home from the shop but found that now I can't get to the links list with NVDA f-7 or the letter K. Whoever repaired my computer must have changed some settings on it. I have the proper boxes checked but don't know why this isn't working. Here is what I was trying to do. I wanted to go to the Gmail site to find out if I had messages in my spam folder that aren't spam. When I hit K to go from link to link, all I get is K and nothing else. When I hit NVDA f-7 to go to the links list, I get a message asking if I want to turn on caret browsing. What could bee causing this?

 

Thanks for your help in advance.

 

Rosemarie  


Re: NVDA and Firefox 57

Dejan Ristic
 

I've just opened Firefox to find it bug up on the very start page.

On 14/11/2017 22:26, Dejan Ristic wrote:
Do you manage to make it work with youtube? When I tried it today, it bugged my machine up, and made me to shut it up as was not recommended to start it again to get myself out of the bug-up situation. Then,  tried some simpler sites to check whether it would be the same, and found out that it worked good.


I use Windows 7, 64bit with NVDA 2017.3.


Firefox version, latest.


Do you think that I may enable and/or disable some security and/or accessibility features to make it easier for my Firefox to deal with more complicated sites such as youtube, FB, and some pronounciation-providing dictionaries? I am ready to disable all the security features and be as vulnerable as possible to any sort of attacks so as to make it go as smoothly as possible because the sites I visit are 100% risk free.


Thankful in advance,


Dejan


On 14/11/2017 19:04, Don H wrote:
I am finding that NVDA 2017-3 works just fine with Firefox version 57.




.




Re: the new firefox quanttum

Chris
 

                                Well I’m using nightly 59.01 and that seems ok

 

So maybe try the later one

 

 

From: Scott VanDeWalle
Sent: 14 November 2017 21:43
To: nvda@nvda.groups.io
Subject: [nvda] the new firefox quanttum

 

Hello all.

 

I just installed the new firefox.

The only thing wrong with it as far as I’m concerned is that it is slower.

So for now I’ll either use google chrome or edge as my default browser.

I’m using the new nightly firefox 58, and it is not much better, as promised it would be.

Just my opinions though.

Have a good da y.

 

Scott

 


the new firefox quanttum

Scott VanDeWalle
 

Hello all.

 

I just installed the new firefox.

The only thing wrong with it as far as I’m concerned is that it is slower.

So for now I’ll either use google chrome or edge as my default browser.

I’m using the new nightly firefox 58, and it is not much better, as promised it would be.

Just my opinions though.

Have a good da y.

 

Scott