Date   

Re: email and nvda

Gene
 

Don't providers give more than one address to users?  Why couldn't you have separate accounts, for different purposes using different addresses with the same provider?  Or as another solution, have different names you give as your display name for different purposes.  Then use display rules to send mmessages with one display name to one folder and with another display name to another.  The problem doesn't seem difficult to solve and using Outlook Express for some or perhaps many users introduces complications and annoyances.  I don't use Outlook Express but a very knowledgeable tech on another list I follow has seen enough people have problems with it that he recommends that only advanced users use the Windows 10 version.  And I've seen long discussions from a few users who set up everything correctly and the program still doesn't work correctly. 
 
Nowadays, with an add on I read about recently that provides first letter navigation in the folders list, the last major problem with Thunderbird accessibility has evidently been solved.  There are two minor accessibility problems I know of but the most serious was the inability to move by first letter navigation in the folders tree view for those with multiple accounts.
 
Gene

----- Original Message -----
Sent: Tuesday, September 05, 2017 2:43 AM
Subject: Re: [nvda] email and nvda

What I mean is completely separate  identities as in Outlook Express where
one cannot see any of the other accounts at all. Of course you can have  the
same account in two identities if you want, say one imap and one pop3, but
equally you can put in a password so that an identity cannot be opened
without it. OK its not mega secure, but  I'm not using it for that reason.
I'm ttrying to keep charity and perrsonal emails apart and mail list emails
and soccial group emails as well. What I do not want is one big tree view
with everything on it all in the same view.
 Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Antony Stone" <antony.stone@...>
To: <nvda@nvda.groups.io>
Sent: Monday, September 04, 2017 5:44 PM
Subject: Re: [nvda] email and nvda


> I'm not entirely certain what you mean by the specific word "identities",
> because Thunderbird can certainly have multiple user settings, which can
> collect email from different accounts, are configured with the reply
> address for
> each of those accounts, so that you can reply to emails from the different
> addresses.
>
> Whether these are called "identities" (it's the word I would use) or
> something
> else, I don't know, but it certainly has this facility.
>
>
> Antony.
>
> On Monday 04 September 2017 at 18:13:57, Gene wrote:
>
>> As far as I know, Thunderbird doesn't have identities.  Also, it is my
>> impression that identities are considered obsolete and aren't generally
>> used in what are considered modern e-mail programs.  Windows Live Mail
>> doesn't use them, I doubt Thunderbird does, I've never seen any evidence
>> that it does, and we'll see what others say about other programs.
>>
>> Gene
>> ----- Original Message -----
>>
>> From: Brian's Mail list account via Groups.Io
>> Sent: Monday, September 04, 2017 4:33 AM
>> To: nvda@nvda.groups.io
>> Subject: Re: [nvda] email and nvda
>>
>>
>> Can you open several folders and leave them open and just go between
>> them?
>>  Also how can one do identities on Tbird, to make it work like Outlook
>> express so you know which email  account is replying to an email.
>>  Brian
>>
>> bglists@...
>> Sent via blueyonder.
>> Please address personal email to:-
>> briang1@..., putting 'Brian Gaff'
>> in the display name field.
>> ----- Original Message -----
>> From: "Travis Siegel" <tsiegel@...>
>> To: <nvda@nvda.groups.io>
>> Sent: Monday, September 04, 2017 5:10 AM
>> Subject: Re: [nvda] email and nvda
>>
>> > thunderbird works a treat. It's a bit slow at times (especially if you
>> > have thousands and thousands of messages), but otherwise, it works just
>> > fine with NVDA, and I've been using it for just about a year now
>> > without
>> > any major problems.
>> >
>> > On 9/3/2017 10:20 PM, slery wrote:
>> >> I am looking for a new email program (obviously needs to work with
>> >> NVDA).
>> >>
>> >> Must haves: work with gmail, work with multiple email accounts, open
>> >> multiple folders at the same time
>> >>
>> >> Thanks for any help. Outlook keeps crashing every time I try to open a
>> >> second folder (or even just switch to a different folder within the
>> >> same window).
>> >>
>> >> Cindy
>
> --
> Numerous psychological studies over the years have demonstrated that the
> majority of people genuinely believe they are not like the majority of
> people.
>
>                                                   Please reply to the
> list;
>                                                         please *don't* CC
> me.
>
>
>




Re: one core voices

Gene
 

You can't use them unless you use Windows 10. 
 
Gene

----- Original Message -----
Sent: Monday, September 04, 2017 9:49 PM
Subject: Re: [nvda] one core voices

how do I get 1cor voices what is the key comboNation

On 9/4/17, Lubos Pintes <lubos.pintes@...> wrote:
> This is a known bug and could be fixed in NVDA master.
>
>
> Dňa 4. 9. 2017 o 0:20 Don H napísal(a):
>>
>> I can increase the rate within ghe NVDA voice setings.  I guess the
>> lag I am talking about is when you are at the desktop and use single
>> letter navagation there is a lag before you get the voicing of the
>> icon you are moving to.  For example at the desktop I hit the letter n
>> and it moves me to the NVDA icon but the David one core voice takes
>> longer to say NVDA versus how long it takes Access32 to say NVDA.
>>
>>
>> On 9/3/2017 5:02 PM, Gene New Zealand wrote:
>>>
>>> Hi don
>>>
>>>
>>> At present you can not ajust the speed through the settings in nvda
>>> to speed up the windows one core voices. from what i have read there
>>> is a update from windows which will fix this if i read it correct.
>>>
>>>
>>> there is a work around for the moment which works.
>>>
>>>
>>> In windows 10 in the search box i typed text to speech and then it
>>> came up with some results.
>>>
>>> it cam up with the following result Change text-to-speech settings,
>>> System settings of which i pressed the enter key on.
>>>
>>>
>>> When the next screen came up it defaults to my one core voice i
>>> chose. Tab to the rate and change it there just use the arrow keys to
>>> do this.
>>>
>>>
>>> Then close it the screen i mean.
>>>
>>>
>>> You will notice now in nvda he will be speaking quicker.
>>>
>>>
>>> Gene nz
>>>
>>>
>>>
>>> On 04/09/2017 08:58, Don H wrote:
>>>> Having used Window Eyes for some 20 years with decaccess32 as my syn
>>>> I have been using the access
>>>>
>>>> 32 syn with NVDA.  I have tried the One Core  David voice but find
>>>> it has some lag as compared to the access32 syn.  Of course David
>>>> sounds more natural and Access32 is more robotic sounding. Is there
>>>> a way to change how the one core voices perform?
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>> --
>>> Image NVDA certified expert
>>> Check out my website for NVDA tutorials and other blindness related
>>> material at http://www.accessibilitycentral.net Regardless of where
>>> you are in New Zealand if you are near one of the APNK sites you can
>>> use a copy of the NVDA screen reader on one of their computers. To
>>> find out which locations (or location) is near to you please visit
>>> http://www.aotearoapeoplesnetwork.org/content/partner-libraries
>>> (Aotearoa People's Network Kaharoa). To find an NVDA certified expert
>>> near you, please visit the following link
>>> https://certification.nvaccess.org/. The certification page contains
>>> the official list of NVDA certified individuals from around the
>>> world, who have sat and successfully passed the NVDA expert exam.
>>
>>
>
>
>
>
>


--
for if you persavear. you will conker never fear. try try try again




Re: Github

Patrick ZAJDA
 

Hi Brian,

You surely won't be surprised if I say you suppose right about "fork".
It is another repos which is a copy of the main one. In this repository
you make your modifications and open you pull request for commiters to
pull your modifications to the main NVDA code.

Don't give up :) sure there might be some confusing things but nothing
impossible to understand.


Patrick

Le 04/09/2017 à 18:11, Brian's Mail list account via Groups.Io a écrit :
I think I'll give up while I'm losing. and I assume you mean its only a
fork cos its a fork off the main run of the code development.

Not a fork as in eating your dinner.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message ----- From: "Patrick ZAJDA via Groups.Io"
<patrick=zajda.fr@groups.io>
To: <nvda@nvda.groups.io>
Sent: Monday, September 04, 2017 11:40 AM
Subject: Re: [nvda] Github


Hi Brian,

It is a pull because the code is pulled from a fork.

Patrick

Le 04/09/2017 à 10:47, Brian's Mail list account via Groups.Io a écrit :
So why is it called a pull not a push?
Seems logical to me. :-)
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message ----- From: "Patrick ZAJDA via Groups.Io"
<patrick=zajda.fr@groups.io>
To: <nvda@nvda.groups.io>
Sent: Sunday, September 03, 2017 2:47 PM
Subject: Re: [nvda] Github


Hi Gene,

Pull requests are code contribution from another Github repos.
You fork the NVDA git repos on your Github account, make your code
contribution then submit it by creating a pull request.

It facilitates code merging.

Patrick

Le 03/09/2017 à 15:28, Gene a écrit :
What are pull requests?

Gene
----- Original Message -----
*From:* Brian's Mail list account via Groups.Io
<mailto:bglists=blueyonder.co.uk@groups.io>
*Sent:* Sunday, September 03, 2017 7:15 AM
*To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
*Subject:* Re: [nvda] Github

I asked this some time ago, and Jamie sent me some stuff. There is now a
new
issues link and also a search field, but I've never found the search
to be
very intuitive and I suspect this is why so many duplicate issues get
filed.

Quinton sent me this also.
https://github.com/nvaccess/nvda/issues -
there is a search edit on that page you can type your query in to see if
there's an existing issue (open or closed, though note it will only show
open issues at first by default) which deals with what you are looking
for.

To post a new issue, there should be a "new issue" button on most pages.
Activating that will take you here:
https://github.com/nvaccess/nvda/issues/new with the main components
being
a title edit and a "leave a comment" edit where you can describe your
issue
in detail.


However recently some guidelines are now in there for fields that prompt
you
to give useful information as well.

One thing that I do not like about it is that it does not send an
email to
you even if you are subscribed to its list, you only see others
comments.
However when you reply via email, you really do need to edit off quoted
stuff as otherwise looking at the issue on line gets very confused. I
occasionally forget myself. Also, it won't send you back these emails
either.
I am not sure who came up with this rule but its bonkers if you use the
email list to know where you are, as to see your own comments you
either
need to find it in your own sent folder or go to the website.
Anyway, I've had my say.
Problems? Well...
The biggest issue I had was creating the account in the first place and
getting past all the stuff that is just not relevant.


You can attach files, but thus far I've not made this work!
Brian

bglists@blueyonder.co.uk <mailto:bglists@blueyonder.co.uk>
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk <mailto:briang1@blueyonder.co.uk>, putting
'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Gene" <gsasner@ripco.com <mailto:gsasner@ripco.com>>
To: <nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>>
Sent: Sunday, September 03, 2017 12:34 PM
Subject: [nvda] Github


I just looked at the Github NVDA part of the site. I haven't signed
up yet
but it looks easy to do so and to create a pull request, which I
assume is
what is generally referred to on this list as a ticket. But many people
may
find the page confusing. Is there a way that some sort of short help
information can be inserted after the navigation links on the page,
instructing people what to do to create what are called tickets, perhaps
also how to search for tickets and how to create an account? If tickets
are
desired from the widest variety of users, this process should be somehow
explained and done so in a place that those wishing to create tickets
will
be likely to see the explanation.

Gene












Re: Refering to [nvda] Request for comments: an outline of a complete course on NVDA internals and code contributions

ahmed abd alslam
 

send mail to
nvda+devlearning+subscribe@groups.io.

On 9/4/17, Khaled Shabana <kh33shabana@gmail.com> wrote:
I have a good idea about Python. I also make some applications. I use
NVDA since 2010. I want to know when the course will start and how i
can join it.




Re: nvda remote host

Antony Stone
 

It's not for security reasons - it's for simple technical reasons. Most
people's computers are not on public IP addresses; they're on private
addresses, able to connect to the Internet through a router. The router is a
one-way device - computers on the private network can connect to the Internet
(and the replies can come back again), but without some slightly complicated
fiddling around with the router settings, no-one out on the Internet can
connect to a computer on the private network.

Therefore two computers on networks like this cannot connect to each other,
however both can connect to a server which is on a public IP address,
therefore that's why the remote host machine is needed.

The two computers on private networks connect to the host on a public IP
address, and it can reply back to each of those machines, therefore it can
bridge the connection and the two private machines end up talking to each
other, which they could not do directly.


In fact, if you do have two computers on a single network which want to use
the NVDA Remote Addon and can talk directly between themselves, you can do
this - you just put each computer's IP address into the settings on the other
machine, and they communicate directly without the need for the remote host.

So, if the two computers can talk to each other directly, NVDA Remote allows
this, but if they can't, the remote host server enables the connection.


Regards,


Antony.

On Tuesday 05 September 2017 at 09:47:12, Brian's Mail list account via
Groups.Io wrote:

I have to say that I really do not understand why remote works this way
through a host. Is it something obvious?
Since I've not had cause to use it myself as yet it seems just a bit
complex. Is it security or for other reasons that the two interconnected
machines do not talk directly to each other?
Brian
----- Original Message -----
From: "Darren Tomblin" <dtomblin@hotmail.com>
To: <nvda@nvda.groups.io>
Sent: Tuesday, September 05, 2017 8:03 AM
Subject: [nvda] nvda remote host

hi, I was reading the documentation for the remote addon and it talks
about a remote host. I was wondering if theres one available thats free.
thanks
--
The words "e pluribus unum" on the Great Seal of the United States are from a
poem by Virgil entitled "Moretum", which is about cheese and garlic salad
dressing.

Please reply to the list;
please *don't* CC me.


Re: nvda remote host

Brian's Mail list account <bglists@...>
 

I have to say that I really do not understand why remote works this way through a host. Is it something obvious?
Since I've not had cause to use it myself as yet it seems just a bit complex. Is it security or for other reasons that the two interconnected machines do not talk directly to each other?
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Darren Tomblin" <dtomblin@hotmail.com>
To: <nvda@nvda.groups.io>
Sent: Tuesday, September 05, 2017 8:03 AM
Subject: [nvda] nvda remote host


hi, I was reading the documentation for the remote addon and it talks
about a remote host. I was wondering if theres one available thats free.
thanks

--
73,
Darren Tomblin(KC9JJJ)




Re: email and nvda

Brian's Mail list account <bglists@...>
 

What I mean is completely separate identities as in Outlook Express where one cannot see any of the other accounts at all. Of course you can have the same account in two identities if you want, say one imap and one pop3, but equally you can put in a password so that an identity cannot be opened without it. OK its not mega secure, but I'm not using it for that reason. I'm ttrying to keep charity and perrsonal emails apart and mail list emails and soccial group emails as well. What I do not want is one big tree view with everything on it all in the same view.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Antony Stone" <antony.stone@nvda.open.source.it>
To: <nvda@nvda.groups.io>
Sent: Monday, September 04, 2017 5:44 PM
Subject: Re: [nvda] email and nvda


I'm not entirely certain what you mean by the specific word "identities",
because Thunderbird can certainly have multiple user settings, which can
collect email from different accounts, are configured with the reply address for
each of those accounts, so that you can reply to emails from the different
addresses.

Whether these are called "identities" (it's the word I would use) or something
else, I don't know, but it certainly has this facility.


Antony.

On Monday 04 September 2017 at 18:13:57, Gene wrote:

As far as I know, Thunderbird doesn't have identities. Also, it is my
impression that identities are considered obsolete and aren't generally
used in what are considered modern e-mail programs. Windows Live Mail
doesn't use them, I doubt Thunderbird does, I've never seen any evidence
that it does, and we'll see what others say about other programs.

Gene
----- Original Message -----

From: Brian's Mail list account via Groups.Io
Sent: Monday, September 04, 2017 4:33 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] email and nvda


Can you open several folders and leave them open and just go between them?
Also how can one do identities on Tbird, to make it work like Outlook
express so you know which email account is replying to an email.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Travis Siegel" <tsiegel@softcon.com>
To: <nvda@nvda.groups.io>
Sent: Monday, September 04, 2017 5:10 AM
Subject: Re: [nvda] email and nvda

thunderbird works a treat. It's a bit slow at times (especially if you
have thousands and thousands of messages), but otherwise, it works just
fine with NVDA, and I've been using it for just about a year now without
any major problems.

On 9/3/2017 10:20 PM, slery wrote:
I am looking for a new email program (obviously needs to work with
NVDA).

Must haves: work with gmail, work with multiple email accounts, open
multiple folders at the same time

Thanks for any help. Outlook keeps crashing every time I try to open a
second folder (or even just switch to a different folder within the
same window).

Cindy
--
Numerous psychological studies over the years have demonstrated that the
majority of people genuinely believe they are not like the majority of people.

Please reply to the list;
please *don't* CC me.


Re: Making Partition Using NVDA

Brian's Mail list account <bglists@...>
 

Its a tool that works in Windows here, as I just ran it on an xp machine. It uses another small O'S to do the work certainly, but the one I have actually makes its script in xp, then reboots to do the work.


Please don't be so adamant about things. It sounds rude. I don't get annoyed easily, but others might of course.

Anyway, have a nice day.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Travis Siegel" <tsiegel@softcon.com>
To: <nvda@nvda.groups.io>
Sent: Monday, September 04, 2017 10:26 PM
Subject: Re: [nvda] Making Partition Using NVDA


Partition magic is *not* (I repeat) partition magic is *not* a windows tool. Therefore, your statements are erroneous. Microsoft does not include partition magic with windows, so that makes it neither free, nor is it part of windows (which is what the original poster was asking for.



On 9/4/2017 4:53 AM, Brian's Mail list account via Groups.Io wrote:
That is clearly not true, as a friend of mine has done this, but he is sighted. He used partition magic and a special bit of code in the primary partition that allowed you to select which OS you booted. As there are only two and it always defaults to the same position, the fact that this does not speak is not an issue for blind use.
I'll need to ask him the trick.
I think it can have issues if there is already a hidden partition for recovery use as is often the case these days. Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message ----- From: "Travis Siegel" <tsiegel@softcon.com>
To: <nvda@nvda.groups.io>
Sent: Sunday, September 03, 2017 4:41 PM
Subject: Re: [nvda] Making Partition Using NVDA


If there's a way to resize partitions with built in windows tools, I
sure never learned about it. The only way to make one partition two
partitions is to delete the existing partition, and create two of them,
which wipes out everything on the drive, and leaves you with two freshly
formatted partitions both of which will be completely blank. This is
fine if you don't care about the contents of your hard disk, but if
you're trying to simply split a single partition into two partitions,
then there aren't any ways to do this with just default windows utilities.


On 9/2/2017 11:41 PM, Raghavendra Janivarada wrote:

Hi, I don’t want to go with third party application. Built-in disk
management option can fulfil my requirement. My question is that How
to do this using NVDA?

Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
Windows 10

*From: *Travis Siegel <mailto:tsiegel@softcon.com>
*Sent: *03 September 2017 01:55
*To: *nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
*Subject: *Re: [nvda] Making Partition Using NVDA

Unless you have a program that can resize partitions, you're not going
to be able to change your partitions without loosing
everything.Paragon has a couple programs that can do this, check out
http://paragon-software.com and take a look at their partition manager
or their hard disk manager depending on how much you want to do. Both
programs aren't 100 percent accessible, but they're close enough to
get the job done. If you're willing to help out, let me know, and
can give you my affiliate links, but if you just want to purchase the
programs, that's ok too.

On 9/2/2017 12:07 PM, Raghavendra Janivarada wrote:

Hi List,

Kindly someone guide me to make partition on C drive using NVDA.

I am using Del laptop with Win10 64 Bits. In this laptop all the
space is reserved for C drive. I want to make two partitions to
allocate my data.

Thanks In Advance

Raghu

Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986>
for Windows 10

https://ipmcdn.avast.com/images/icons/icon-envelope-tick-round-orange-animated-no-repeat-v1.gif
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon>



Virus-free. www.avast.com
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=link>









Re: nvda remote host

Webmaster Deweer <webmaster_deweer@...>
 

Dear Darren

Surely, there is one. You can use nvdaremote.com for free, if you want.

If there are others, or if there is a simple way to setup a new one, please let me know!

Thank you in advance!

Kindes regards,
Jordy Deweer.

-----Oorspronkelijk bericht-----
Van: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] Namens Darren Tomblin
Verzonden: Tuesday, September 5, 2017 9:03 AM
Aan: nvda@nvda.groups.io
Onderwerp: [nvda] nvda remote host

hi, I was reading the documentation for the remote addon and it talks about a remote host. I was wondering if theres one available thats free.
thanks

--
73,
Darren Tomblin(KC9JJJ)


nvda remote host

Darren Tomblin
 

hi, I was reading the documentation for the remote addon and it talks
about a remote host. I was wondering if theres one available thats free.
thanks

--
73,
Darren Tomblin(KC9JJJ)


Re: one core voices

Darren Tomblin
 

after I click on region and language what do I do to add a language pack I can't seem to figure it out. thanks


On 9/4/2017 11:07 PM, Quentin Christensen wrote:
OneCore voices are only available in Windows 10.  If you have Windows 10 then you can add new voices by:
1. Press the WINDOWS key to open the start menu
2. Start typing "Region and language".
3. When "Region and language settings" come up as a system settings option, press ENTER.
4. On this screen, you can add new languages, and for languages you already have installed, you can add a speech pack (if not already installed) - tab to the first language, arrow through the languages you have installed, press ENTER on one, tab to "Options" and enter on that to go into its options).



On Tue, Sep 5, 2017 at 12:49 PM, mr. Chikodinaka Nickarandidum Oguledo <ochikodinaka@...> wrote:
how do I get 1cor voices what is the key comboNation

On 9/4/17, Lubos Pintes <lubos.pintes@...> wrote:
> This is a known bug and could be fixed in NVDA master.
>
>
> Dňa 4. 9. 2017 o 0:20 Don H napísal(a):
>>
>> I can increase the rate within ghe NVDA voice setings.  I guess the
>> lag I am talking about is when you are at the desktop and use single
>> letter navagation there is a lag before you get the voicing of the
>> icon you are moving to.  For example at the desktop I hit the letter n
>> and it moves me to the NVDA icon but the David one core voice takes
>> longer to say NVDA versus how long it takes Access32 to say NVDA.
>>
>>
>> On 9/3/2017 5:02 PM, Gene New Zealand wrote:
>>>
>>> Hi don
>>>
>>>
>>> At present you can not ajust the speed through the settings in nvda
>>> to speed up the windows one core voices. from what i have read there
>>> is a update from windows which will fix this if i read it correct.
>>>
>>>
>>> there is a work around for the moment which works.
>>>
>>>
>>> In windows 10 in the search box i typed text to speech and then it
>>> came up with some results.
>>>
>>> it cam up with the following result Change text-to-speech settings,
>>> System settings of which i pressed the enter key on.
>>>
>>>
>>> When the next screen came up it defaults to my one core voice i
>>> chose. Tab to the rate and change it there just use the arrow keys to
>>> do this.
>>>
>>>
>>> Then close it the screen i mean.
>>>
>>>
>>> You will notice now in nvda he will be speaking quicker.
>>>
>>>
>>> Gene nz
>>>
>>>
>>>
>>> On 04/09/2017 08:58, Don H wrote:
>>>> Having used Window Eyes for some 20 years with decaccess32 as my syn
>>>> I have been using the access
>>>>
>>>> 32 syn with NVDA.  I have tried the One Core  David voice but find
>>>> it has some lag as compared to the access32 syn.  Of course David
>>>> sounds more natural and Access32 is more robotic sounding. Is there
>>>> a way to change how the one core voices perform?
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>> --
>>> Image NVDA certified expert
>>> Check out my website for NVDA tutorials and other blindness related
>>> material at http://www.accessibilitycentral.net Regardless of where
>>> you are in New Zealand if you are near one of the APNK sites you can
>>> use a copy of the NVDA screen reader on one of their computers. To
>>> find out which locations (or location) is near to you please visit
>>> http://www.aotearoapeoplesnetwork.org/content/partner-libraries
>>> (Aotearoa People's Network Kaharoa). To find an NVDA certified expert
>>> near you, please visit the following link
>>> https://certification.nvaccess.org/. The certification page contains
>>> the official list of NVDA certified individuals from around the
>>> world, who have sat and successfully passed the NVDA expert exam.
>>
>>
>
>
>
>
>


--
for if you persavear. you will conker never fear. try try try again






--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


-- 
73,
Darren Tomblin(KC9JJJ)


Re: email and nvda

 

Well you can have different profiles and accounts though it has come to my attention that with all the issues in office of late that for all its cracked up to be ms is using a vary slow and clunky cloud engine and it doesn't work so well.

Thunderbird, firefox, etc use the chrome engine which uses the chromium engine which is well fast.

The only thing that is no good is lightning but windows calendar app is fine for that.

On 5/09/2017 4:13 a.m., Gene wrote:
As far as I know, Thunderbird doesn't have identities. Also, it is my impression that identities are considered obsolete and aren't generally used in what are considered modern e-mail programs. Windows Live Mail doesn't use them, I doubt Thunderbird does, I've never seen any evidence that it does, and we'll see what others say about other programs.

Gene
----- Original Message -----

From: Brian's Mail list account via Groups.Io
Sent: Monday, September 04, 2017 4:33 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] email and nvda


Can you open several folders and leave them open and just go between them?
Also how can one do identities on Tbird, to make it work like Outlook
express so you know which email account is replying to an email.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Travis Siegel" <tsiegel@softcon.com>
To: <nvda@nvda.groups.io>
Sent: Monday, September 04, 2017 5:10 AM
Subject: Re: [nvda] email and nvda


thunderbird works a treat. It's a bit slow at times (especially if you
have thousands and thousands of messages), but otherwise, it works just
fine with NVDA, and I've been using it for just about a year now without
any major problems.



On 9/3/2017 10:20 PM, slery wrote:
I am looking for a new email program (obviously needs to work with NVDA).

Must haves: work with gmail, work with multiple email accounts, open
multiple folders at the same time

Thanks for any help. Outlook keeps crashing every time I try to open a
second folder (or even just switch to a different folder within the
same window).

Cindy




Re: NVDA and Windows older versions

 

I don't mind a voice system.

But yeah the days when the command interface was king, where we were responsible for our own actions.

Where when you screwed up you screwed up and that was final.

Now you don't have to screw up to screw up, you can do something wrong and have a nice brick, but you didn't know what you did.

A reformat will make your brick work a good reformat makes it work.

But you don't know and will never know what you did unless you catch yourself doing it.

I do like the level I have now and I do like voice but if you want to well do as you used to do you have to really want to its not in front of you now.

I am happy I was born when the old systems still stand.

I have users which can't opperate without voice or in fact can't dream of using a normal old style system.

Then I have family that while they may use a tablet every day need a mouse for everything.

On 5/09/2017 4:10 a.m., Brian's Mail list account via Groups.Io wrote:
I'm not so much scared of it, and maybe this is a discussion for another place, but what is actually going on is fragmentation. The voice control and dictation systems are in danger of making users dumb down, and those of us who want to do more than normal stuff are being written out of the script, IE them blindies can now use they voice to do internet shopping etc, why should they need accessible apps?
If you get my drift. its the old Disabled are inconvenient thing all over again, of course it never really went away, its just not been possible before to hive us off with our own system.
Sad if it does go this way.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message ----- From: "Shaun Everiss" <sm.everiss@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Monday, September 04, 2017 11:20 AM
Subject: Re: [nvda] NVDA and Windows older versions


What really scares me is that ms lost the battle for action centre on antivirus notifications.

I agree you can bypass things however in an accessibility viewpoint laws asside now ms has lost its basically opened the door for people to put in their own notifications or inaccessible changes and all they need to prove is that it mucks up how things should work.

I know this may be a bit dumb especially with how we progressed but back in the day expensive that it was we had our software and equipment and the sighted had our's.

We progressed up and up till win10 and now I am not sure.

Look at symbian, look at win7 look at win xp 98 and lower, look at dos.

It used to be simple for us, and while I know going back really isn't an option with all the changes going on with tech and the sighted winning, a bit of me is screaming give up and go back to the way it used to be before you get something that will never work.

Its not rational I know that but as all these new things go on getting inaccessible and up and down and such that part is getting louder and louder.

I used to be ready for the future, now I am scared of it.




On 4/09/2017 8:59 p.m., Brian's Mail list account via Groups.Io wrote:
I know I read it, but to be honest. its a concept issue. Some of use find the logic hard to actually get into our motor memory, whereas the old sort of menus worked as each was obviously the same from the logic point of view. but I'm not going to start a ribbon vs other ideas thread of annoyance here. Far more worrying are these badly named universal apps where it seems almost anything goes from no menu bars to some and with buttons dumped any old place for no good reason on the screen. Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message ----- From: "Gene" <gsasner@ripco.com>
To: <nvda@nvda.groups.io>
Sent: Sunday, September 03, 2017 6:32 PM
Subject: Re: [nvda] NVDA and Windows older versions


Regardless of all the doom and gloom you hear all over about ribbons, th3ey are nothing more than a different and perfectly logical way of organizing programs. Here is a tutorial I wrote to provide instruction in learning ribbons. it appears below my signature.

Gene

I'll provide a brief tutorial based on what I wrote years ago of how to work with ribbons.

I've added a little to it here.

I don't know how the organization of Windows has changed in Windows 10 but this description should allow you to look through the Windows ribbons, or any other ribbons, and see how things are organized.

First, I'll discuss a structure found in later versions of Windows that you need to know about-- the split button.
One thing you will see as you look around ribbons and in other places in Windows are split buttons. A split button often allows you to see more options than just the default action. Let's take an example.
Let's say you come across a split button that says shut down Windows. If you press enter on that button, Windows will shut down. That is the default action. Split buttons often show more options if you either right arrow while on the button or down arrow. As an example, if you are on the shut down split button, you can right arrow and a list of options will open. the items in the list include sleep, hibernate, restart, and others. You up or down arrow through the list or use the short cut commands you hear announced as you move through the list. the letter shortcuts often take actions without pressing enter so be careful when using them, just as you are in menus.

So, let's review. You find a split button that says shut down. If you press enter, the computer will shut down. If you right arrow, other options may be displayed. Or if you down arrow, other options may be displayed. A split button won't work with both methods. One method, either right arrowing or down arrowing will do so if it can be done with the button. Try both methods if you don't know which one might work. If you are on a tool bar which extends across the screen from left to right, down arrowing will open additional options. If you think about this, it makes sense. If you are in a menu, down arrowing will move you to the next item in the menu. So you right arrow on the split button to cause it to display more options. In a tool bar that extends across the screen from left to right, right arrowing will move you to the next item in the tool bar. So you down arrow when on the split button to cause it to display more options. But some tool bars run up and down the screen, as menus do. And at times, you may not be sure which way a structure extends on screen. So, as I said, if you are not sure or don't know, try both methods of causing the split button to display more options. Often, one of them will work. If you open the options a split button offers and don't want to work with them, arrow in the opposite direction to move out of them. For example, if you right arrowed to open more options, left arrow.
Some split buttons don't do anything when you right arrow or down arrow. In that case, open them with alt down arrow. Then tab through the additional options. I've almost never worked in this way with split buttons but if you want to close a split button, try alt up arrow if you've used alt down arrow to open it.

Now, to ribbons themselves.

Regarding ribbons, much of the complaining about them is not warranted if you understand how they work and how to use short cut commands effectively and efficiently. and I would strongly recommend against using the JAWS virtual menus, no matter what the JAWS training material says about ribbons being difficult to use. the training material is just plain wrong and using virtual menus, you will be unnecessarily dependent on one screen-reader. There are other disadvantages to using them which I won't go into here.

Try looking at ribbons and doing what is described below in wordpad. Everyone with Windows 7 has Wordpad on their machine. Wordpad provides a good environment to look at and practice working with ribbons.

The essence of working with ribbons is this:
Press alt to move to the upper ribbon.
You will probably be on an item that says home tab. Items on the upper ribbon are announced as tabs such as home tab, view tab, etc.
To see what ribbons are available, right or left arrow repeatedly to move through the ribbons. Move in one
direction to move through all of them, just as you would to move through all the menus.

For this demonstration, just so we are all doing the same thing, move with the right arrow. When you get back to where you started, you can keep right arrowing to move through the items again, if you wish. You can move through all the items as many times as you want. Or you can move with the left arrow whenever you want to move in the opposite direction.

Stop on view. Then start tabbing. You will move through all items in what is called the lower ribbon that are in the view ribbon.

In other words you tab to see the items in a ribbon once you move to it. Tab moves you forward through the items, shift tab moves you backword.
So tab and shift tab are used instead of up and down arrow.

Many items in the lower ribbon are buttons. Use either the space bar or enter to activate the button. You may find a button that opens a menu and if you press enter or the space bar, you will then be in a menu.

Each time you move to an item, you will hear the short cut command to work with that item.
But JAWS has a bug and you often won't. To hear the short cut, use the command JAWS key tab. If you are using the default JAWS key, it is either insert.

Try tabbing to an item in a Wordpad ribbon and using the command insert tab. You will hear some extraneous information. The last thing you will hear is the short cut sequence. You can repeat the information by repeating the command as often as you want.

Let's look at an item which is usually called the application menu. Return to the main program window in wordpad by closing the ribbons. You can either press escape repeatedly, if necessary, or you can press alt once. Now, open the ribbons again with alt.
Start right arrowing until you get to the application menu.
You will hear application menu and then something like button drop down grid. Never mind drop down grid. It's a description you don't have to worry about. The important things are that you are on a button and at the application menu. Press enter or the space bar to activate the button. Activating the button opens the menu. Start down arrowing. you will hear all the short cut commands necessary to open an item or take an action. When you got to the menu item, you heard alt f. When you open the menu and move through it, you will hear all the letters announced. for example, if you down arrow to save as, you will hear alt f a. that means that, when you are in the main program window, you open the menu as you always did, alt f, then type a. Alt f opens the menau and a then opens save as. Ribbon programs have one menu and you should look through it. Many important and common commands and interfaces such as options may be there. By options, I mean the kind of options interface you used to find in the tools menu.

Now the we have seen the menu, let's look at the ribbons structure some more.
To review, and add more information, as you have seen, you can move to the ribbon interface with alt. Then right and left arrow, just as you would move from menu to menu.
You can also move to a ribbon using alt and a letter. So, alt h takes you to the home ribbon. Alt v takes you to the view ribbon, etc. Once you are on the ribbon you want to work with, tab to move forward through the items in a ribbon. Shift tab to move back through the items. So tab and shift tab are used instead of up and down arrow.
Ribbons are divided into categories which you will hear announced as you tab. for example, in an e-mail program, a ribbon may have a category named respond. You may hear this announced as respond tool bar. As you tab, you will hear commands such as reply and forward in the respond category. When you hear a category announced, don't tab until you hear everything spoken. You will miss the first command in the category if you do. I'm talking about working with an unfamiliar ribbon.
there are often many more commands and items in a ribbon than in a menu. So memorize command sequences for items you know you will use regularly.
As I said, there are different categories in ribbons to help organize items. You can quickly jump from category to category in a ribbon to help you see if there is a category you want to look through.
Move to a ribbon in Wordpad. For example, alt h for hhome or alt v for view.
Then repeatedly issue the command control right arrow to move forward from category to category and control left arrow to move back. When you get to a category you want to hear the items in, start tabbing. Of course, you can shift tab to move back.

Open a ribbon in Wordpad and tab through it to see how it is organized by moving through it.
Then use control right arrow to move by category and tab to see what is in a category.

Commands such as control o, control n, control s, control r, etc. are mostly retained in programs
that use ribbons, though you won't hear them announced. If you don't already know them, you'll have to find them in ways such as by looking at a list of keyboard commands for the program. Such lists are often available in the help for the program. If you already know the commands from having used an older version of the program, most or perhaps even all of the commands you know will work.







.


Re: NVDA and Windows older versions

 

Well to be honest who knows even when adobe and others put the basic standards in its a hit and miss thing.

And sadly its what is holding us blind people back.

I shouldn't be thinking windows xp is better or dos is better, or my old blindy product has been better.

But I am.

And to be honest I doubt vary much that we can actually make companies change at all we are just to small.

They have to want to from office to security companies,etc.

I still use a lot of 32 bit desktop apps.

But I am a home user.

I don't need ms office or business software I have a budget antivirus program, a scanner and video conversion suite which did cost a lot and a midrange audio editer come cd ripper as well as a audio decoder for dvds.

I have a few games, and then the rest is opensource or freeware,.

I don't need much in the way of accessible software, most of my stuff is simple.

We can't even get the simple stuff sometimes to work let alone the universals.

One thing I'd like to see is some sort of blindy spaciffic windows shell or something that just works without all the bells on it.

On 5/09/2017 3:24 a.m., Joseph Lee wrote:
Hi,
As I noted on Win10 forum (not here) numerous times, the level of accessibility of universal apps depends on willingness from vendors to take accessibility seriously and commit to it. In other words, what matters now is attitudes, not just aptitude. Microsoft is a prime example of what happens when a company takes accessibility seriously, whereas Facebook is not (I myself have given up on accessibility of Facebook universal app; sending numerous advisories and attempts at talking to FB to take accessibility seriously didn't work). But attitudes from vendors is just part of the picture: attitudes from screen reader vendors is also important, as VFO customers are finding out the hard way these days, just as NVDA users did two years ago when support for Edge and universal apps was in infancy. As this month happens to be the second anniversary of Windows 10 App Essentials, I'll reaffirm my vow that, as long as Windows 10 ecosystem and universal apps live, I'll continue to provide new versions of this add-on (the next stable version is scheduled for tomorrow and it supports changes made to Windows Store in August via release preview ring).
By the way, apart from one or two issues, NVDA 2017.3 is ready for Windows 10 Fall Creators Update (the issues are inability to navigate emoji panel with synthesizers other than OneCore and not being able to adjust speech rate for this synthesizer just yet, both of which require using newer Windows SDK versions).
Cheers,
Joseph

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Lino Morales
Sent: Monday, September 4, 2017 4:36 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA and Windows older versions

Speaking of UWP apps Joseph needs to circulate his awesome post on making them accessible in WIN 10. We haven't made any progress in my opinion in the blindness coummity contacting MS. Facebook and FB Messenger being the 2 that once were.


On 9/4/2017 4:59 AM, Brian's Mail list account via Groups.Io wrote:
I know I read it, but to be honest. its a concept issue. Some of use
find the logic hard to actually get into our motor memory, whereas the
old sort of menus worked as each was obviously the same from the logic
point of view. but I'm not going to start a ribbon vs other ideas
thread of annoyance here. Far more worrying are these badly named
universal apps where it seems almost anything goes from no menu bars
to some and with buttons dumped any old place for no good reason on
the screen. Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message ----- From: "Gene" <gsasner@ripco.com>
To: <nvda@nvda.groups.io>
Sent: Sunday, September 03, 2017 6:32 PM
Subject: Re: [nvda] NVDA and Windows older versions


Regardless of all the doom and gloom you hear all over about ribbons,
th3ey are nothing more than a different and perfectly logical way of
organizing programs. Here is a tutorial I wrote to provide
instruction in learning ribbons. it appears below my signature.

Gene

I'll provide a brief tutorial based on what I wrote years ago of how
to work with ribbons.

I've added a little to it here.

I don't know how the organization of Windows has changed in Windows 10
but this description should allow you to look through the Windows
ribbons, or any other ribbons, and see how things are organized.

First, I'll discuss a structure found in later versions of Windows
that you need to know about-- the split button.
One thing you will see as you look around ribbons and in other places
in Windows are split buttons. A split button often allows you to see
more options than just the default action. Let's take an example.
Let's say you come across a split button that says shut down Windows.
If you press enter on that button, Windows will shut down. That is
the default action. Split buttons often show more options if you
either right arrow while on the button or down arrow. As an example,
if you are on the shut down split button, you can right arrow and a
list of options will open. the items in the list include sleep,
hibernate, restart, and others. You up or down arrow through the list
or use the short cut commands you hear announced as you move through
the list. the letter shortcuts often take actions without pressing
enter so be careful when using them, just as you are in menus.

So, let's review. You find a split button that says shut down. If you
press enter, the computer will shut down. If you right arrow, other
options may be displayed. Or if you down arrow, other options may be
displayed. A split button won't work with both methods. One method,
either right arrowing or down arrowing will do so if it can be done
with the button. Try both methods if you don't know which one might
work. If you are on a tool bar which extends across the screen from
left to right, down arrowing will open additional options. If you
think about this, it makes sense. If you are in a menu, down arrowing
will move you to the next item in the menu. So you right arrow on the
split button to cause it to display more options. In a tool bar that
extends across the screen from left to right, right arrowing will move
you to the next item in the tool bar. So you down arrow when on the
split button to cause it to display more options. But some tool bars
run up and down the screen, as menus do. And at times, you may not be
sure which way a structure extends on screen. So, as I said, if you
are not sure or don't know, try both methods of causing the split
button to display more options. Often, one of them will work. If you
open the options a split button offers and don't want to work with
them, arrow in the opposite direction to move out of them. For
example, if you right arrowed to open more options, left arrow.
Some split buttons don't do anything when you right arrow or down
arrow. In that case, open them with alt down arrow. Then tab through
the additional options. I've almost never worked in this way with
split buttons but if you want to close a split button, try alt up
arrow if you've used alt down arrow to open it.

Now, to ribbons themselves.

Regarding ribbons, much of the complaining about them is not warranted
if you understand how they work and how to use short cut commands
effectively and efficiently. and I would strongly recommend against
using the JAWS virtual menus, no matter what the JAWS training
material says about ribbons being difficult to use. the training
material is just plain wrong and using virtual menus, you will be
unnecessarily dependent on one screen-reader. There are other
disadvantages to using them which I won't go into here.

Try looking at ribbons and doing what is described below in wordpad.
Everyone with Windows 7 has Wordpad on their machine. Wordpad provides
a good environment to look at and practice working with ribbons.

The essence of working with ribbons is this:
Press alt to move to the upper ribbon.
You will probably be on an item that says home tab. Items on the upper
ribbon are announced as tabs such as home tab, view tab, etc.
To see what ribbons are available, right or left arrow repeatedly to
move through the ribbons. Move in one direction to move through all
of them, just as you would to move through all the menus.

For this demonstration, just so we are all doing the same thing, move
with the right arrow. When you get back to where you started, you can
keep right arrowing to move through the items again, if you wish. You
can move through all the items as many times as you want. Or you can
move with the left arrow whenever you want to move in the opposite
direction.

Stop on view. Then start tabbing. You will move through all items in
what is called the lower ribbon that are in the view ribbon.

In other words you tab to see the items in a ribbon once you move to
it. Tab moves you forward through the items, shift tab moves you
backword.
So tab and shift tab are used instead of up and down arrow.

Many items in the lower ribbon are buttons. Use either the space bar
or enter to activate the button. You may find a button that opens a
menu and if you press enter or the space bar, you will then be in a menu.

Each time you move to an item, you will hear the short cut command to
work with that item.
But JAWS has a bug and you often won't. To hear the short cut, use
the command JAWS key tab. If you are using the default JAWS key, it
is either insert.

Try tabbing to an item in a Wordpad ribbon and using the command
insert tab. You will hear some extraneous information. The last thing
you will hear is the short cut sequence. You can repeat the
information by repeating the command as often as you want.

Let's look at an item which is usually called the application menu.
Return to the main program window in wordpad by closing the ribbons.
You can either press escape repeatedly, if necessary, or you can press
alt once. Now, open the ribbons again with alt.
Start right arrowing until you get to the application menu.
You will hear application menu and then something like button drop
down grid. Never mind drop down grid. It's a description you don't
have to worry about. The important things are that you are on a
button and at the application menu. Press enter or the space bar to
activate the button. Activating the button opens the menu. Start down
arrowing. you will hear all the short cut commands necessary to open
an item or take an action. When you got to the menu item, you heard
alt f. When you open the menu and move through it, you will hear all
the letters announced. for example, if you down arrow to save as, you
will hear alt f a. that means that, when you are in the main program
window, you open the menu as you always did, alt f, then type a. Alt
f opens the menau and a then opens save as. Ribbon programs have one
menu and you should look through it. Many important and common
commands and interfaces such as options may be there. By options, I
mean the kind of options interface you used to find in the tools menu.

Now the we have seen the menu, let's look at the ribbons structure
some more.
To review, and add more information, as you have seen, you can move to
the ribbon interface with alt. Then right and left arrow, just as you
would move from menu to menu.
You can also move to a ribbon using alt and a letter. So, alt h takes
you to the home ribbon. Alt v takes you to the view ribbon, etc.
Once you are on the ribbon you want to work with, tab to move forward
through the items in a ribbon. Shift tab to move back through the
items. So tab and shift tab are used instead of up and down arrow.
Ribbons are divided into categories which you will hear announced as
you tab. for example, in an e-mail program, a ribbon may have a
category named respond. You may hear this announced as respond tool
bar. As you tab, you will hear commands such as reply and forward in
the respond category. When you hear a category announced, don't tab
until you hear everything spoken. You will miss the first command in
the category if you do. I'm talking about working with an unfamiliar
ribbon.
there are often many more commands and items in a ribbon than in a
menu. So memorize command sequences for items you know you will use
regularly.
As I said, there are different categories in ribbons to help organize
items. You can quickly jump from category to category in a ribbon to
help you see if there is a category you want to look through.
Move to a ribbon in Wordpad. For example, alt h for hhome or alt v
for view.
Then repeatedly issue the command control right arrow to move forward
from category to category and control left arrow to move back. When
you get to a category you want to hear the items in, start tabbing.
Of course, you can shift tab to move back.

Open a ribbon in Wordpad and tab through it to see how it is organized
by moving through it.
Then use control right arrow to move by category and tab to see what
is in a category.

Commands such as control o, control n, control s, control r, etc. are
mostly retained in programs that use ribbons, though you won't hear
them announced. If you don't already know them, you'll have to find
them in ways such as by looking at a list of keyboard commands for the
program. Such lists are often available in the help for the program.
If you already know the commands from having used an older version of
the program, most or perhaps even all of the commands you know will
work.







.


Re: one core voices

Rosemarie Chavarria
 

You can't get one-core voices unless you're on windows 10.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of mr. Chikodinaka Nickarandidum Oguledo
Sent: Monday, September 4, 2017 7:49 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] one core voices

how do I get 1cor voices what is the key comboNation

On 9/4/17, Lubos Pintes <lubos.pintes@gmail.com> wrote:
This is a known bug and could be fixed in NVDA master.


Dňa 4. 9. 2017 o 0:20 Don H napísal(a):

I can increase the rate within ghe NVDA voice setings. I guess the
lag I am talking about is when you are at the desktop and use single
letter navagation there is a lag before you get the voicing of the
icon you are moving to. For example at the desktop I hit the letter
n and it moves me to the NVDA icon but the David one core voice takes
longer to say NVDA versus how long it takes Access32 to say NVDA.


On 9/3/2017 5:02 PM, Gene New Zealand wrote:

Hi don


At present you can not ajust the speed through the settings in nvda
to speed up the windows one core voices. from what i have read there
is a update from windows which will fix this if i read it correct.


there is a work around for the moment which works.


In windows 10 in the search box i typed text to speech and then it
came up with some results.

it cam up with the following result Change text-to-speech settings,
System settings of which i pressed the enter key on.


When the next screen came up it defaults to my one core voice i
chose. Tab to the rate and change it there just use the arrow keys
to do this.


Then close it the screen i mean.


You will notice now in nvda he will be speaking quicker.


Gene nz



On 04/09/2017 08:58, Don H wrote:
Having used Window Eyes for some 20 years with decaccess32 as my
syn I have been using the access

32 syn with NVDA. I have tried the One Core David voice but find
it has some lag as compared to the access32 syn. Of course David
sounds more natural and Access32 is more robotic sounding. Is there
a way to change how the one core voices perform?





--
Image NVDA certified expert
Check out my website for NVDA tutorials and other blindness related
material at http://www.accessibilitycentral.net Regardless of where
you are in New Zealand if you are near one of the APNK sites you can
use a copy of the NVDA screen reader on one of their computers. To
find out which locations (or location) is near to you please visit
http://www.aotearoapeoplesnetwork.org/content/partner-libraries
(Aotearoa People's Network Kaharoa). To find an NVDA certified
expert near you, please visit the following link
https://certification.nvaccess.org/. The certification page contains
the official list of NVDA certified individuals from around the
world, who have sat and successfully passed the NVDA expert exam.




--
for if you persavear. you will conker never fear. try try try again


Re: email and nvda

 

I can confirm the same issue, outlook doesn't seem to want to read the first top level of messages but it will read messages once opened, the window is maximised, and I have the latest office update.

Also if you try to get at folders office may or may not become unresponsive.

For me its not a big issue as I don't use it its my dad's however its a pain when checking, and using narator produces the same results so its probably an office issue but who knows.

On 4/09/2017 11:24 p.m., Lino Morales wrote:
Mozilla Thunderbird is great. If you want less bells and whistles the built in Mail app in Windows 10 should work for you. What version of MS Office are you running? What screen reader do you use? Maybe Office needs to be uninstalled then reinstalled again.


On 9/3/2017 10:20 PM, slery wrote:

I am looking for a new email program (obviously needs to work with NVDA).

Must haves: work with gmail, work with multiple email accounts, open multiple folders at the same time

Thanks for any help. Outlook keeps crashing every time I try to open a second folder (or even just switch to a different folder within the same window).

Cindy


Re: one core voices

Quentin Christensen
 

OneCore voices are only available in Windows 10.  If you have Windows 10 then you can add new voices by:
1. Press the WINDOWS key to open the start menu
2. Start typing "Region and language".
3. When "Region and language settings" come up as a system settings option, press ENTER.
4. On this screen, you can add new languages, and for languages you already have installed, you can add a speech pack (if not already installed) - tab to the first language, arrow through the languages you have installed, press ENTER on one, tab to "Options" and enter on that to go into its options).



On Tue, Sep 5, 2017 at 12:49 PM, mr. Chikodinaka Nickarandidum Oguledo <ochikodinaka@...> wrote:
how do I get 1cor voices what is the key comboNation

On 9/4/17, Lubos Pintes <lubos.pintes@...> wrote:
> This is a known bug and could be fixed in NVDA master.
>
>
> Dňa 4. 9. 2017 o 0:20 Don H napísal(a):
>>
>> I can increase the rate within ghe NVDA voice setings.  I guess the
>> lag I am talking about is when you are at the desktop and use single
>> letter navagation there is a lag before you get the voicing of the
>> icon you are moving to.  For example at the desktop I hit the letter n
>> and it moves me to the NVDA icon but the David one core voice takes
>> longer to say NVDA versus how long it takes Access32 to say NVDA.
>>
>>
>> On 9/3/2017 5:02 PM, Gene New Zealand wrote:
>>>
>>> Hi don
>>>
>>>
>>> At present you can not ajust the speed through the settings in nvda
>>> to speed up the windows one core voices. from what i have read there
>>> is a update from windows which will fix this if i read it correct.
>>>
>>>
>>> there is a work around for the moment which works.
>>>
>>>
>>> In windows 10 in the search box i typed text to speech and then it
>>> came up with some results.
>>>
>>> it cam up with the following result Change text-to-speech settings,
>>> System settings of which i pressed the enter key on.
>>>
>>>
>>> When the next screen came up it defaults to my one core voice i
>>> chose. Tab to the rate and change it there just use the arrow keys to
>>> do this.
>>>
>>>
>>> Then close it the screen i mean.
>>>
>>>
>>> You will notice now in nvda he will be speaking quicker.
>>>
>>>
>>> Gene nz
>>>
>>>
>>>
>>> On 04/09/2017 08:58, Don H wrote:
>>>> Having used Window Eyes for some 20 years with decaccess32 as my syn
>>>> I have been using the access
>>>>
>>>> 32 syn with NVDA.  I have tried the One Core  David voice but find
>>>> it has some lag as compared to the access32 syn.  Of course David
>>>> sounds more natural and Access32 is more robotic sounding. Is there
>>>> a way to change how the one core voices perform?
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>> --
>>> Image NVDA certified expert
>>> Check out my website for NVDA tutorials and other blindness related
>>> material at http://www.accessibilitycentral.net Regardless of where
>>> you are in New Zealand if you are near one of the APNK sites you can
>>> use a copy of the NVDA screen reader on one of their computers. To
>>> find out which locations (or location) is near to you please visit
>>> http://www.aotearoapeoplesnetwork.org/content/partner-libraries
>>> (Aotearoa People's Network Kaharoa). To find an NVDA certified expert
>>> near you, please visit the following link
>>> https://certification.nvaccess.org/. The certification page contains
>>> the official list of NVDA certified individuals from around the
>>> world, who have sat and successfully passed the NVDA expert exam.
>>
>>
>
>
>
>
>


--
for if you persavear. you will conker never fear. try try try again






--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


Re: Help With Eloquence

mr. Chikodinaka Nickarandidum Oguledo
 

witch voices are free or witch I need money

On 9/4/17, Shaun Everiss <sm.everiss@gmail.com> wrote:
I havn't looked and if they are old they may not work but I have traced
round for things like winlame and to be honest what I thought was dead
did have an update and is still about.




On 4/09/2017 9:23 a.m., Christopher-Mark Gilland wrote:
What about the old Mbrela voices? I wonder if those things are still
around?
---
Christopher Gilland
Co-founder of Genuine Safe Haven Ministries

http://www.gshministry.org
(980) 500-9575
----- Original Message -----
From: Shaun Everiss
To: nvda@nvda.groups.io
Sent: Sunday, September 03, 2017 5:05 PM
Subject: Re: [nvda] Help With Eloquence


Free voices.

Well you are restricted to the following.

1. the nvda extra voices page has festival, and pico and a few other
things.

2. the speachhub project I think its speachhup.org but I forget thats
got a few.

Thirdly the ms voices, sapi4 are free they are round ms site.

4. While not exactly free if you email enablerehab@gmail.com and get
the dectalk sapi voices and just pay a couple bucks or whatever you
can
spare you will get some voices the volumes are not that great but
well.

Ofcause the other way I'd go is if you can get some cash, watch out
for
voice pack sales, I got the inoetics voices for a sale early on.

The voices at atguys.com are in packs to.

There is flite if you can find it, its worse than espeak but its
about.




On 4/09/2017 3:44 a.m., mr. Chikodinaka Nickarandidum Oguledo wrote:
> any free sites for voices? I don't have any money
>
> On 9/3/17, Antony Stone <antony.stone@nvda.open.source.it> wrote:
>> Have you looked at any of the following sites?
>>
>> https://github.com/nvaccess/nvda/wiki/ExtraVoices
>>
>>
https://www.nvaccess.org/post/high-quality-voices-available-for-nvda/
>>
>> http://www.acapela-nvda.com/
>>
>> I found them all using a Google search for "NVDA voices".
>>
>> Antony.
>>
>> On Sunday 03 September 2017 at 16:55:46, mr. Chikodinaka
Nickarandidum
>> Oguledo
>> wrote:
>>
>>> any voices for free I am now using espeak bilt by NVDA y e speak
np
>>> nop no ivonna or hi tech voices. I will not say there name. I will
not
>>> brack the code. but I hat ihate I hate e speak
>>>
>>> On 9/3/17, Don H <lmddh50@adams.net> wrote:
>>>> go here to get the voices for NVDA.
>>>>
>>>>
http://www.atguys.com/store/index.php?main_page=index&cPath=20&zenid=85ea
>>>> 007d48eb24d89f88d60f78838cbd
>>>>
>>>> On 9/3/2017 9:39 AM, mr. Chikodinaka Nickarandidum Oguledo wrote:
>>>>> if I want it both for free where do I go &if I need to pay how
much
>>>>> are there both caust
>>>>>
>>>>> On 9/3/17, mk360 <mk.seventhson@gmail.com> wrote:
>>>>>> How you can understand clearly what he is saying? It's not
entirely
>>>>>> clear to me so far... ;)
>>>>>> I'm sorry, but I had to say it.
>>>>>>
>>>>>> El 03/09/2017 a las 10:57, Gene escribió:
>>>>>>> you have repeatedly said that the trial has run out and that
you
>>>>>>> want
>>>>>>> the voices forever. Whether you realize it or not, you are
asking
>>>>>>> to
>>>>>>> get the ssoftware illegally. If the owners of the software
wanted
>>>>>>> you
>>>>>>> to have it for free, they wouldn't charge anything and the
software
>>>>>>> wouldn't time out. Now that I have explained this, I will hold
you
>>>>>>> strictly responsible for not requesting illegal software.
>>>>>>> Gene
>>>>>>> ----- Original Message -----
>>>>>>> *From:* mr. Chikodinaka Nickarandidum Oguledo
>>>>>>> <mailto:ochikodinaka@gmail.com>
>>>>>>> *Sent:* Sunday, September 03, 2017 8:51 AM
>>>>>>> *To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
>>>>>>> *Subject:* Re: [nvda] Help With Eloquence
>>>>>>>
>>>>>>> I am not trying2brake the law. that's is y I need the email
address
>>>>>>> to
>>>>>>> the lady hoos needs the help with voices
>>>>>>>
>>>>>>> On 9/3/17, Gene <gsasner@ripco.com <mailto:gsasner@ripco.com>>
>>>>>>> wrote:
>>>>>>>> Well you can't get them for free legally and if you keep up
this
>>>>>>> nonsense,
>>>>>>>
>>>>>>>> requesting free illegal software on list, I will put you on
>>>>>>>> moderated
>>>>>>>> status. You have been told specifically by me, a list
moderator,
>>>>>>>> and
>>>>>>>> perhaps by other members in other messages that it is not
allowed
>>>>>>>> to
>>>>>>> discuss
>>>>>>>
>>>>>>>> illegal software on list. If you don't follow this rule, you
will
>>>>>>>> be
>>>>>>>> moderated for at least one week, probably two or three. You
have
>>>>>>>> been clearly told not to discuss illegal software on list and
you
>>>>>>>> blatantly ignore that request.
>>>>>>>>
>>>>>>>> Gene, Moderator
>>>>>>>> ----- Original Message -----
>>>>>>>> From: mr. Chikodinaka Nickarandidum Oguledo
>>>>>>>> Sent: Sunday, September 03, 2017 8:28 AM
>>>>>>>> To: nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
>>>>>>>> Subject: Re: [nvda] Help With Eloquence
>>>>>>>>
>>>>>>>>
>>>>>>>> y? do u need to pay for vocilizly and eti jaws?eleiqwence I
need
>>>>>>>> them
>>>>>>>> both for free and for ever
>>>>>>>>
>>>>>>>> On 9/3/17, Antony Stone <antony.stone@nvda.open.source.it
>>>>>>> <mailto:antony.stone@nvda.open.source.it>> wrote:
>>>>>>>>> Read the email you are replying to.
>>>>>>>>>
>>>>>>>>> It contains the email address you are asking for.
>>>>>>>>>
>>>>>>>>> In fact it contains it twice.
>>>>>>>>>
>>>>>>>>> Antony.
>>>>>>>>>
>>>>>>>>> On Sunday 03 September 2017 at 15:02:09, mr. Chikodinaka
>>>>>>>>> Nickarandidum
>>>>>>>>> Oguledo
>>>>>>>>>
>>>>>>>>> wrote:
>>>>>>>>>> off list I need your emailAddress so we can gist off list
about
>>>>>>>>>> eliqwence and vocializer
>>>>>>>>>>
>>>>>>>>>> On 9/3/17, Antony Stone wrote:
>>>>>>>>>>> He wrote his email address in the message you just replied
to.
>>>>>>>>>>>
>>>>>>>>>>> Antony.
>>>>>>>>>>>
>>>>>>>>>>> On Sunday 03 September 2017 at 14:37:58, mr. Chikodinaka
>>>>>>> Nickarandidum
>>>>>>>
>>>>>>>>>>> Oguledo wrote:
>>>>>>>>>>>> please please please
>>>>>>>>>>>> I need your email address please so we we we can gist
about
>>>>>>> vocalizer
>>>>>>>
>>>>>>>>>>>> &e t I eleqwence off off this list
>>>>>>>>>>>> my free trial expired I wont to keep it for ever
>>>>>>>>>>>>
>>>>>>>>>>>> On 9/2/17, Ben J. Bloomgren wrote:
>>>>>>>>>>>>> Yes, those voices come with a free trial.
>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Sep 2, 2017, at 05:29, chris judge
>>>>>>> <chrisjudge1967@gmail.com <mailto:chrisjudge1967@gmail.com>>
>>>>>>>
>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi, Write me off list re eloquence.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Chrisjudge1967@gmail.com
<mailto:Chrisjudge1967@gmail.com>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>>>> From: nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
>>>>>>> [mailto:nvda@nvda.groups.io] On Behalf
>>>>>>>
>>>>>>>>>>>>>> Of
>>>>>>>>>>>>>> mr.
>>>>>>>>>>>>>> Chikodinaka Nickarandidum Oguledo
>>>>>>>>>>>>>> Sent: August 28, 2017 2:12 PM
>>>>>>>>>>>>>> To: nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
>>>>>>>>>>>>>> Subject: Re: [nvda] Help With Eloquence
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> is there a free tom or somethah for nvda not payed
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On 8/28/17, Sarah k Alawami <marrie12@gmail.com
>>>>>>> <mailto:marrie12@gmail.com>> wrote:
>>>>>>>>>>>>>>> Which one is the $59 one that donates a part of the
cost
>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>> nvda?
>>>>>>>>>>>>>>> I think I got the price wrong but this company donates
a
>>>>>>> part of
>>>>>>>
>>>>>>>>>>>>>>> the cost of eloquence to the nvda company. I should add
I
>>>>>>>>>>>>>>> did
>>>>>>>>>>>>>>> google for it but by now lost the link in my over 200
>>>>>>>>>>>>>>> thousand
>>>>>>>>>>>>>>> history items I've
>>>>>>>>>>>>>>> kept for about 7 years.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Take care all.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Aug 27, 2017, at 5:23 PM, Rosemarie Chavarria
>>>>>>>>>>>>>>>> <knitqueen2007@gmail.com
<mailto:knitqueen2007@gmail.com>>
>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> You have to pay for that one. You can't get it
illegally.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>>>>>> From: nvda@nvda.groups.io
<mailto:nvda@nvda.groups.io>
>>>>>>> [mailto:nvda@nvda.groups.io] On Behalf
>>>>>>>
>>>>>>>>>>>>>>>> Of
>>>>>>>>>>>>>>>> mr. Chikodinaka Nickarandidum Oguledo
>>>>>>>>>>>>>>>> Sent: Sunday, August 27, 2017 3:00 PM
>>>>>>>>>>>>>>>> To: nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
>>>>>>>>>>>>>>>> Subject: Re: [nvda] Help With Eloquence
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> yes I did. but I need the add on to eliqwence for
NVDA
>>>>>>>>>>>>>>>> everything
>>>>>>>>>>>>>>>> is readey
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On 8/27/17, Rosemarie Chavarria
<knitqueen2007@gmail.com
>>>>>>> <mailto:knitqueen2007@gmail.com>>
>>>>>>>
>>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>> You can't use the jaws eloquence voice because it's
tied
>>>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>>>> Jaws.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>>>>>>> From: nvda@nvda.groups.io
<mailto:nvda@nvda.groups.io>
>>>>>>> [mailto:nvda@nvda.groups.io] On
>>>>>>>
>>>>>>>>>>>>>>>>> Behalf
>>>>>>>>>>>>>>>>> Of mr.
>>>>>>>>>>>>>>>>> Chikodinaka Nickarandidum Oguledo
>>>>>>>>>>>>>>>>> Sent: Sunday, August 27, 2017 5:01 AM
>>>>>>>>>>>>>>>>> To: nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
>>>>>>>>>>>>>>>>> Subject: Re: [nvda] Help With Eloquence
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I need the link 2the jaws add on for NVDA hq please
or
>>>>>>>>>>>>>>>>> large
>>>>>>>>>>>>>>>>> voices/addpns for nvda NVDA is my favorit favorit
>>>>>>>>>>>>>>>>> creenreader
>>>>>>>>>>>>>>>>> in
>>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>>> world
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> On 8/27/17, mattias <mjonsson1986@gmail.com
>>>>>>> <mailto:mjonsson1986@gmail.com>> wrote:
>>>>>>>>>>>>>>>>>> Open nvda menu insert+n
>>>>>>>>>>>>>>>>>> 2 times down Arrow
>>>>>>>>>>>>>>>>>> There is a submenu called codefactory There should
it be
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Skickades från E-post för Windows 10
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Från: Gene
>>>>>>>>>>>>>>>>>> Skickat: den 27 augusti 2017 09:54
>>>>>>>>>>>>>>>>>> Till: nvda@nvda.groups.io
<mailto:nvda@nvda.groups.io>
>>>>>>>>>>>>>>>>>> Ämne: Re: [nvda] Help With Eloquence
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> please don't leave the group when you don't want to
get
>>>>>>>>>>>>>>>>>> mail
>>>>>>>>>>>>>>>>>> from
>>>>>>>>>>>>>>>>>> it. Every time you unsubscribe, when you subscribe
and
>>>>>>> send a
>>>>>>>
>>>>>>>>>>>>>>>>>> message, the first message you send has to be
approved.
>>>>>>> Every
>>>>>>>
>>>>>>>>>>>>>>>>>> new member has to have his first message approved.
This
>>>>>>> is a
>>>>>>>
>>>>>>>>>>>>>>>>>> setting list administrators can't change. It is a
>>>>>>> setting set
>>>>>>>
>>>>>>>>>>>>>>>>>> by the entire list serve administrator.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Please go nomail so that every time you want to
start
>>>>>>>>>>>>>>>>>> receiving
>>>>>>>>>>>>>>>>>> mail and discuss something, the first message you
send
>>>>>>> doesn't
>>>>>>>
>>>>>>>>>>>>>>>>>> have
>>>>>>>>>>>>>>>>>> to be approved.
>>>>>>>>>>>>>>>>>> While messages are generally approved quickly or
>>>>>>>>>>>>>>>>>> reasonbly
>>>>>>>>>>>>>>>>>> promptly, you may wait many hours perhaps six or
eight if
>>>>>>>>>>>>>>>>>> neeither the owner or I look at the list because we
are
>>>>>>>>>>>>>>>>>> busy
>>>>>>>>>>>>>>>>>> or
>>>>>>>>>>>>>>>>>> sleeping. To go nomail, send a blank message to
>>>>>>>>>>>>>>>>>> nvda+nomail@nvda.groups.io
>>>>>>> <mailto:nvda+nomail@nvda.groups.io>
>>>>>>>
>>>>>>>>>>>>>>>>>> To resume receiving mail as individual messages,
send a
>>>>>>>>>>>>>>>>>> message
>>>>>>>>>>>>>>>>>> to nvda+single@nvda.groups.io
>>>>>>> <mailto:nvda+single@nvda.groups.io>
>>>>>>>
>>>>>>>>>>>>>>>>>> That will resume single delivery if you have gone
nomail.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Regarding your problem, did you shut down NVDA and
run it
>>>>>>>>>>>>>>>>>> again
>>>>>>>>>>>>>>>>>> after installing the add on?
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Also, do you know about the SAPI5 Eloquence from, as
I
>>>>>>> recall
>>>>>>>
>>>>>>>>>>>>>>>>>> Code Factory?
>>>>>>>>>>>>>>>>>> The eloquence in the add on you are trying has lots
of
>>>>>>>>>>>>>>>>>> annoying
>>>>>>>>>>>>>>>>>> artifacts.
>>>>>>>>>>>>>>>>>> The SAPI 5 Eloquence sounds as it should. You can
get a
>>>>>>> demo
>>>>>>>
>>>>>>>>>>>>>>>>>> of
>>>>>>>>>>>>>>>>>> that version as well. If you have problems finding
it,
>>>>>>> asking
>>>>>>>
>>>>>>>>>>>>>>>>>> here
>>>>>>>>>>>>>>>>>> should get you the information.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Gene
>>>>>>>>>>>>>>>>>> ----- Original Message -----
>>>>>>>>>>>>>>>>>> From: Ibrahim Ajayi
>>>>>>>>>>>>>>>>>> Sent: Saturday, August 26, 2017 9:27 PM
>>>>>>>>>>>>>>>>>> To: nvda@nvda.groups.io
<mailto:nvda@nvda.groups.io>
>>>>>>>>>>>>>>>>>> Subject: [nvda] Help With Eloquence
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Hi good people:
>>>>>>>>>>>>>>>>>> I've just installed a copy of codefactory elequence
>>>>>>> expressive
>>>>>>>
>>>>>>>>>>>>>>>>>> ad
>>>>>>>>>>>>>>>>>> on for NVDA, and I am starting with the trial
version.
>>>>>>>>>>>>>>>>>> The program has been properly installed, and I've
gone
>>>>>>> through
>>>>>>>
>>>>>>>>>>>>>>>>>> the settings. But I cannot find the program in the
>>>>>>>>>>>>>>>>>> synthesiser
>>>>>>>>>>>>>>>>>> sub-menu of NVDA.
>>>>>>>>>>>>>>>>>> Please can anyone help me understand what could have
gone
>>>>>>>>>>>>>>>>>> wrong,
>>>>>>>>>>>>>>>>>> or
>>>>>>>>>>>>>>>>>> what I didn't do properly?
>>>>>>>>>>>>>>>>>> Regards.
>>>>>>>>>>>>>>>>>> I am Ibrahim Ajayi from Nigeria.
>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>> for if you persavear. you will conker never fear. try
try
>>>>>>>>>>>>>>>>> try
>>>>>>>>>>>>>>>>> again
>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>> for if you persavear. you will conker never fear. try
try
>>>>>>>>>>>>>>>> try
>>>>>>>>>>>>>>>> again
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>> for if you persavear. you will conker never fear. try
try try
>>>>>>>>>>>>>> again
>>>>>>>>>>> --
>>>>>>>>>>> It is also possible that putting the birds in a laboratory
>>>>>>>>>>> setting
>>>>>>>>>>> inadvertently renders them relatively incompetent.
>>>>>>>>>>>
>>>>>>>>>>> - Daniel C Dennett
>>>>>>>>>>>
>>>>>>>>>>> Please
reply
>>>>>>> to the
>>>>>>>
>>>>>>>>>>> list;
>>>>>>>>>>>
>>>>>>>>>>> please
>>>>>>>>>>> *don't*
>>>>>>>>>>> CC
>>>>>>>>>>>
>>>>>>>>>>> me.
>>>>>>>>> --
>>>>>>>>> If the human brain were so simple that we could understand
it,
>>>>>>>>> we'd be so simple that we couldn't.
>>>>>>>>>
>>>>>>>>> Please
reply
>>>>>>>>> to
>>>>>>>>>
>>>>>>>>> the
>>>>>>>>> list;
>>>>>>>>> please *don't*
>>>>>>>>> CC
>>>>>>>>> me.
>>>>>>>> --
>>>>>>>> for if you persavear. you will conker never fear. try try try
again
>>>>>>> --
>>>>>>> for if you persavear. you will conker never fear. try try try
again
>>
>>
>>
>







--
for if you persavear. you will conker never fear. try try try again


Re: one core voices

mr. Chikodinaka Nickarandidum Oguledo
 

how do I get 1cor voices what is the key comboNation

On 9/4/17, Lubos Pintes <lubos.pintes@gmail.com> wrote:
This is a known bug and could be fixed in NVDA master.


Dňa 4. 9. 2017 o 0:20 Don H napísal(a):

I can increase the rate within ghe NVDA voice setings.  I guess the
lag I am talking about is when you are at the desktop and use single
letter navagation there is a lag before you get the voicing of the
icon you are moving to.  For example at the desktop I hit the letter n
and it moves me to the NVDA icon but the David one core voice takes
longer to say NVDA versus how long it takes Access32 to say NVDA.


On 9/3/2017 5:02 PM, Gene New Zealand wrote:

Hi don


At present you can not ajust the speed through the settings in nvda
to speed up the windows one core voices. from what i have read there
is a update from windows which will fix this if i read it correct.


there is a work around for the moment which works.


In windows 10 in the search box i typed text to speech and then it
came up with some results.

it cam up with the following result Change text-to-speech settings,
System settings of which i pressed the enter key on.


When the next screen came up it defaults to my one core voice i
chose. Tab to the rate and change it there just use the arrow keys to
do this.


Then close it the screen i mean.


You will notice now in nvda he will be speaking quicker.


Gene nz



On 04/09/2017 08:58, Don H wrote:
Having used Window Eyes for some 20 years with decaccess32 as my syn
I have been using the access

32 syn with NVDA.  I have tried the One Core  David voice but find
it has some lag as compared to the access32 syn.  Of course David
sounds more natural and Access32 is more robotic sounding. Is there
a way to change how the one core voices perform?





--
Image NVDA certified expert
Check out my website for NVDA tutorials and other blindness related
material at http://www.accessibilitycentral.net Regardless of where
you are in New Zealand if you are near one of the APNK sites you can
use a copy of the NVDA screen reader on one of their computers. To
find out which locations (or location) is near to you please visit
http://www.aotearoapeoplesnetwork.org/content/partner-libraries
(Aotearoa People's Network Kaharoa). To find an NVDA certified expert
near you, please visit the following link
https://certification.nvaccess.org/. The certification page contains
the official list of NVDA certified individuals from around the
world, who have sat and successfully passed the NVDA expert exam.



--
for if you persavear. you will conker never fear. try try try again


Re: getting messages to automatically read in outlook when using NVDA

Gene
 

I meant what I said, that I read mail as plain text because it is safer.  I don't know if reading mail as html exposes the user to much risk but plain text is safer.
 
Gene

----- Original Message -----
Sent: Monday, September 04, 2017 8:50 PM
Subject: Re: [nvda] getting messages to automatically read in outlook when using NVDA

Gene,

Did you mean to write “I read mail in HTML as it is the safe way to read mail?”

Thanks

Blessings

Pascal

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Monday, September 4, 2017 4:45 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] getting messages to automatically read in outlook when using NVDA

 

Are you reading mail as plain text or as HTML?  NVDA has a feature called automatic read on page load.  It is in the browse mode settings.  But it is checked by default.  I don't read mail as HTML because that is the safest way to read it.  No malicious code can run.  But I just found out today from a message from someone, I believe on another List, that Thunderbird has an HTML setting that shows mail as HTML but doesn't allow any code to run. 

 

I don't know what program you are using, but, as I've said before, there are times when simply getting in the habit of executing a command can save you time and trouble.  When I do a search on an Internet page, I issue the read current line command after I do the search to avoid reading of extraneous text.  After a little while, it's second nature.  I read mail in plain text in my e-mail program.  I've been using the read to end command after I move to a new message for years.  It's second nature. 

 

Screen-readers take a way of displaying information that isn't intended for use with screen-readers and makes the information accessible.  At times, something isn't going to work perfectly.  Computer operating systems aren't made by blind people and screen-readers work remarkably well with them.  Take it or leave it, my advice, based on nineteen or twenty years of experience with Windows is that you will save a lot of trouble if you adopt such procedures when they are minimal, as I've been describing and not spend time and trouble being a perfectionist about how this or this minor problem should work in a perfect world.

 

Gene

----- Original Message -----

From: Casey

Sent: Monday, September 04, 2017 3:21 PM

Subject: Re: [nvda] getting messages to automatically read in outlook when using NVDA

 

Hi sorry about that.
When I am using Jaws and delete the message I am currently reading.
It will open the next one and read it right away.
Now when I use NVDA and delete the message that I am reading.
And it will open the next one but I have to hit the NVDA key and down arrow
then it will read the message.
So I hope that clears that up.
How do I make NVDA do what Jaws does when reading and deleting A message and
moving on to the next message and having it read it?




-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Antony
Stone
Sent: Monday, September 04, 2017 8:49 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] getting messages to automatically read in outlook when
using NVDA

I'm not quite sure what the problem is here.  You say that with JAWS:

"I can open a message and then read it and hit control delete and I will go
on
to the next message".

I assume you mean it's deleted the first message as well.

Then you say that with NVDA:

"I can do this it will delete the message that I just read, but then it will

open the next one"

You then say you have to use NVDA-down to actually read that message.

Maybe it's just because of the different wording you've used, but what's the

difference between JAWS, which "goes on to the next message", and NVDA,
which
"deletes the message you just read and then opens the next one"?

To me these things sound the same.


Antony.

On Monday 04 September 2017 at 15:39:23, Casey wrote:

> Hi when I am using Jaws and the latest version of outlook.
>
> I can open A message and then read it and hit control delete and I will go
> on to the next message.
>
> Now if I use NVDA I can do this it will delete the message that I just
> read.
>
> But then it will open the next on and I will have to use the NVDA key and
> down arrow to read the next message.
>
> Can you get an add on that will fix that or is that just the way things
> work with that screen reader?

--
Most people have more than the average number of legs.

                                                   Please reply to the list;
                                                         please *don't* CC
me.