Date   

Re: Exchanging Acapela activation keys how's it done?

Quentin Christensen
 

I don't know - but just replying to suggest (particularly as you want to do it by the end of the month) that it might be worth contacting Acapela directly to ask. I expect you could probably use the acapela-nvda-mobilization@... address they setup to get the extended trial in the first place.

Quentin.

On Fri, Jun 26, 2020 at 2:58 AM Gerardo Corripio <gera1027@...> wrote:

What would the process involve, and can it be done before the 1st of july in which the 3-monthsAcapela NVDA voices stop working,deactivating the 3-month license, and put in thedefinite one that was purchased?

 

                                                                                              Enviado desde Correo para Windows 10

 



--
Quentin Christensen
Training and Support Manager


Exchanging Acapela activation keys how's it done?

Gerardo Corripio
 

What would the process involve, and can it be done before the 1st of july in which the 3-monthsAcapela NVDA voices stop working,deactivating the 3-month license, and put in thedefinite one that was purchased?

 

                                                                                              Enviado desde Correo para Windows 10

 


Re: Fixed Vocalizer-Expressive driver for NVDA 2019.3.1 and later

luke scholey
 

I’ve been looking for a trial version as well. I’ve already tried emailing but no response. Does anyone know how to try this before buying?

Great that the error was fixed quickly
Luke

On 25 Jun 2020, at 15:23, Bob Jutzi <jutzi@windstream.net> wrote:

I would be interested in a demo; however, after installing the current
driver along with a voice, I'm getting a notice that my demo has expired.

On 6/25/2020 10:07 AM, Rui Fontes wrote:
Hello!

We were alerted to an error when typing or spelling in the
Vocalizer-Expressive 3.1.1 driver.

As far as we know, it only affects hebrew and arabic languages...


After some investigation we found the error and have already corrected
it.

The new driver version is at:
https://www.tiflotecnia.net/Instal/vocalizer_expressive_driver-3.1.2.nvda-addon


Best regards,

Customer support
Tiflotecnia, Lda.





Re: nvda add-on for internet download manager

 

Download multiple URL's means exactly that. Batch up a list of downloads that are not contained within a playlist.


Re: Fixed Vocalizer-Expressive driver for NVDA 2019.3.1 and later

Bob Jutzi
 

I would be interested in a demo; however, after installing the current
driver along with a voice, I'm getting a notice that my demo has expired.

On 6/25/2020 10:07 AM, Rui Fontes wrote:
Hello!

We were alerted to an error when typing or spelling in the
Vocalizer-Expressive 3.1.1 driver.

As far as we know, it only affects hebrew and arabic languages...


After some investigation we found the error and have already corrected
it.

The new driver version is at:
https://www.tiflotecnia.net/Instal/vocalizer_expressive_driver-3.1.2.nvda-addon


Best regards,

Customer support
Tiflotecnia, Lda.



Fixed Vocalizer-Expressive driver for NVDA 2019.3.1 and later

Rui Fontes
 

Hello!

We were alerted to an error when typing or spelling in the Vocalizer-Expressive 3.1.1 driver.

As far as we know, it only affects hebrew and arabic languages...


After some investigation we found the error and have already corrected it.

The new driver version is at:
https://www.tiflotecnia.net/Instal/vocalizer_expressive_driver-3.1.2.nvda-addon

Best regards,

Customer support
Tiflotecnia, Lda.


Re: nvda ocr

Sam Taylor
 

Your system focus remains where it was; just continue to use your arrow keys. It's not like JAWS where it's necessary to change back to your original cursor.



On 25/06/2020 10:00 pm, Aschalew Byness wrote:
thank you; but if position the navigator object with nvda+down or up
arrow, what keystroke should I then press to get back to the system
focus?

On 6/25/20, Sam Taylor via groups.io <samtaylor9@...> wrote:
numpad 7 or numpad 9 on a desktop, NVDA up arrow or NVDA down arrow if
using laptop layout.

You may also benefit from reading sections 5.4 and 5.5 of the user
manual concerning object navigation and reviewing text.


On 25/06/2020 9:20 pm, Aschalew Byness wrote:

If I want to ocr a book, how do I position the navigater object? I
mean, what key should I press first before I press nvda+r?

On 6/25/20, Sam Taylor via groups.io <samtaylor9@...> wrote:
NVDA's OCR recognises the current navigator object, not the system
focus. So make sure that you position the navigator object first at the
place you think the OCR should occur, before pressing NVDA+R.

On 25/06/2020 7:51 pm, Aschalew Byness wrote:

The image is a scanned document. I open this scanned document with
Adobe reader. When I open it, nvda says: “Alert: Empty page  page
This page appears to be empty. It may contain a scanned image that
needs OCR or it may be part of a malformed document.” After getting
this message, I press insert +r. nvda says: ‘recognizing. Result
document.” After that, if I press insert +r, nvda says: ‘already in a
content recognition result’. If I arrow then, it reads: ‘blank”.

On 6/25/20, Aschalew Byness via groups.io
<gakidan.ashagre235@...> wrote:
yeah, I am using windows 10 2004 version. when I try to recognize an
image by pressing insert + r, there is nothing shown or heard. no bip
sound, no spoken outcome whether it is recognizing. even when I press
arrow keys, it simply says 'blank'. then How do I know whether it has
started recognizing. How do I know whether it has finished
recognising?

On 6/25/20, zahra <nasrinkhaksar3@...> wrote:
hello.
do you use windows ten?
if so, windows ten has internal ocr functionality that nvda
developers
added support for it since nvda version 2017.3.
if you use any other windows version that has not internal ocr
capability, you should install ocr addon.

On 6/25/20, Aschalew Byness <gakidan.ashagre235@...> wrote:
Hi lovely guys
I always try to have nvda recognize image or scanned documents with
insert+r. I don't get any result though. but, in jaws, when I press
insert + space, o, c, I hear a kind of bip sound to let me know that
the recognition is in process. it also lets me know when it finishes
recognizing the document. I don't get the same in nvda although I
press insert +r. it is dead silence. does this nvda OCR recognition
really work.




--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali






            









Re: nvda ocr

Gene
 

You can't OCR extended material with NVDA. You may be able to OCR something like one image or one page of an image at a time, but not entire documents.

Gene

-----Original Message-----
From: Aschalew Byness
Sent: Thursday, June 25, 2020 6:20 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] nvda ocr

If I want to ocr a book, how do I position the navigater object? I
mean, what key should I press first before I press nvda+r?

On 6/25/20, Sam Taylor via groups.io <samtaylor9=me.com@groups.io> wrote:
NVDA's OCR recognises the current navigator object, not the system
focus. So make sure that you position the navigator object first at the
place you think the OCR should occur, before pressing NVDA+R.

On 25/06/2020 7:51 pm, Aschalew Byness wrote:

The image is a scanned document. I open this scanned document with
Adobe reader. When I open it, nvda says: “Alert: Empty page page
This page appears to be empty. It may contain a scanned image that
needs OCR or it may be part of a malformed document.” After getting
this message, I press insert +r. nvda says: ‘recognizing. Result
document.” After that, if I press insert +r, nvda says: ‘already in a
content recognition result’. If I arrow then, it reads: ‘blank”.

On 6/25/20, Aschalew Byness via groups.io
<gakidan.ashagre235=gmail.com@groups.io> wrote:
yeah, I am using windows 10 2004 version. when I try to recognize an
image by pressing insert + r, there is nothing shown or heard. no bip
sound, no spoken outcome whether it is recognizing. even when I press
arrow keys, it simply says 'blank'. then How do I know whether it has
started recognizing. How do I know whether it has finished
recognising?

On 6/25/20, zahra <nasrinkhaksar3@gmail.com> wrote:
hello.
do you use windows ten?
if so, windows ten has internal ocr functionality that nvda developers
added support for it since nvda version 2017.3.
if you use any other windows version that has not internal ocr
capability, you should install ocr addon.

On 6/25/20, Aschalew Byness <gakidan.ashagre235@gmail.com> wrote:
Hi lovely guys
I always try to have nvda recognize image or scanned documents with
insert+r. I don't get any result though. but, in jaws, when I press
insert + space, o, c, I hear a kind of bip sound to let me know that
the recognition is in process. it also lets me know when it finishes
recognizing the document. I don't get the same in nvda although I
press insert +r. it is dead silence. does this nvda OCR recognition
really work.



--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali







Re: nvda ocr

Aschalew Byness
 

thank you; but if position the navigator object with nvda+down or up
arrow, what keystroke should I then press to get back to the system
focus?

On 6/25/20, Sam Taylor via groups.io <samtaylor9=me.com@groups.io> wrote:
numpad 7 or numpad 9 on a desktop, NVDA up arrow or NVDA down arrow if
using laptop layout.

You may also benefit from reading sections 5.4 and 5.5 of the user
manual concerning object navigation and reviewing text.


On 25/06/2020 9:20 pm, Aschalew Byness wrote:

If I want to ocr a book, how do I position the navigater object? I
mean, what key should I press first before I press nvda+r?

On 6/25/20, Sam Taylor via groups.io <samtaylor9=me.com@groups.io> wrote:
NVDA's OCR recognises the current navigator object, not the system
focus. So make sure that you position the navigator object first at the
place you think the OCR should occur, before pressing NVDA+R.

On 25/06/2020 7:51 pm, Aschalew Byness wrote:

The image is a scanned document. I open this scanned document with
Adobe reader. When I open it, nvda says: “Alert: Empty page page
This page appears to be empty. It may contain a scanned image that
needs OCR or it may be part of a malformed document.” After getting
this message, I press insert +r. nvda says: ‘recognizing. Result
document.” After that, if I press insert +r, nvda says: ‘already in a
content recognition result’. If I arrow then, it reads: ‘blank”.

On 6/25/20, Aschalew Byness via groups.io
<gakidan.ashagre235=gmail.com@groups.io> wrote:
yeah, I am using windows 10 2004 version. when I try to recognize an
image by pressing insert + r, there is nothing shown or heard. no bip
sound, no spoken outcome whether it is recognizing. even when I press
arrow keys, it simply says 'blank'. then How do I know whether it has
started recognizing. How do I know whether it has finished
recognising?

On 6/25/20, zahra <nasrinkhaksar3@gmail.com> wrote:
hello.
do you use windows ten?
if so, windows ten has internal ocr functionality that nvda
developers
added support for it since nvda version 2017.3.
if you use any other windows version that has not internal ocr
capability, you should install ocr addon.

On 6/25/20, Aschalew Byness <gakidan.ashagre235@gmail.com> wrote:
Hi lovely guys
I always try to have nvda recognize image or scanned documents with
insert+r. I don't get any result though. but, in jaws, when I press
insert + space, o, c, I hear a kind of bip sound to let me know that
the recognition is in process. it also lets me know when it finishes
recognizing the document. I don't get the same in nvda although I
press insert +r. it is dead silence. does this nvda OCR recognition
really work.



--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali







Re: nvda ocr

Sam Taylor
 

numpad 7 or numpad 9 on a desktop, NVDA up arrow or NVDA down arrow if using laptop layout.

You may also benefit from reading sections 5.4 and 5.5 of the user manual concerning object navigation and reviewing text.


On 25/06/2020 9:20 pm, Aschalew Byness wrote:

If I want to ocr a book, how do I position the navigater object? I
mean, what key should I press first before I press nvda+r?

On 6/25/20, Sam Taylor via groups.io <samtaylor9@...> wrote:
NVDA's OCR recognises the current navigator object, not the system
focus. So make sure that you position the navigator object first at the
place you think the OCR should occur, before pressing NVDA+R.

On 25/06/2020 7:51 pm, Aschalew Byness wrote:

The image is a scanned document. I open this scanned document with
Adobe reader. When I open it, nvda says: “Alert: Empty page  page
This page appears to be empty. It may contain a scanned image that
needs OCR or it may be part of a malformed document.” After getting
this message, I press insert +r. nvda says: ‘recognizing. Result
document.” After that, if I press insert +r, nvda says: ‘already in a
content recognition result’. If I arrow then, it reads: ‘blank”.

On 6/25/20, Aschalew Byness via groups.io
<gakidan.ashagre235@...> wrote:
yeah, I am using windows 10 2004 version. when I try to recognize an
image by pressing insert + r, there is nothing shown or heard. no bip
sound, no spoken outcome whether it is recognizing. even when I press
arrow keys, it simply says 'blank'. then How do I know whether it has
started recognizing. How do I know whether it has finished
recognising?

On 6/25/20, zahra <nasrinkhaksar3@...> wrote:
hello.
do you use windows ten?
if so, windows ten has internal ocr functionality that nvda developers
added support for it since nvda version 2017.3.
if you use any other windows version that has not internal ocr
capability, you should install ocr addon.

On 6/25/20, Aschalew Byness <gakidan.ashagre235@...> wrote:
Hi lovely guys
I always try to have nvda recognize image or scanned documents with
insert+r. I don't get any result though. but, in jaws, when I press
insert + space, o, c, I hear a kind of bip sound to let me know that
the recognition is in process. it also lets me know when it finishes
recognizing the document. I don't get the same in nvda although I
press insert +r. it is dead silence. does this nvda OCR recognition
really work.




--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali













Re: nvda ocr

Aschalew Byness
 

If I want to ocr a book, how do I position the navigater object? I
mean, what key should I press first before I press nvda+r?

On 6/25/20, Sam Taylor via groups.io <samtaylor9=me.com@groups.io> wrote:
NVDA's OCR recognises the current navigator object, not the system
focus. So make sure that you position the navigator object first at the
place you think the OCR should occur, before pressing NVDA+R.

On 25/06/2020 7:51 pm, Aschalew Byness wrote:

The image is a scanned document. I open this scanned document with
Adobe reader. When I open it, nvda says: “Alert: Empty page page
This page appears to be empty. It may contain a scanned image that
needs OCR or it may be part of a malformed document.” After getting
this message, I press insert +r. nvda says: ‘recognizing. Result
document.” After that, if I press insert +r, nvda says: ‘already in a
content recognition result’. If I arrow then, it reads: ‘blank”.

On 6/25/20, Aschalew Byness via groups.io
<gakidan.ashagre235=gmail.com@groups.io> wrote:
yeah, I am using windows 10 2004 version. when I try to recognize an
image by pressing insert + r, there is nothing shown or heard. no bip
sound, no spoken outcome whether it is recognizing. even when I press
arrow keys, it simply says 'blank'. then How do I know whether it has
started recognizing. How do I know whether it has finished
recognising?

On 6/25/20, zahra <nasrinkhaksar3@gmail.com> wrote:
hello.
do you use windows ten?
if so, windows ten has internal ocr functionality that nvda developers
added support for it since nvda version 2017.3.
if you use any other windows version that has not internal ocr
capability, you should install ocr addon.

On 6/25/20, Aschalew Byness <gakidan.ashagre235@gmail.com> wrote:
Hi lovely guys
I always try to have nvda recognize image or scanned documents with
insert+r. I don't get any result though. but, in jaws, when I press
insert + space, o, c, I hear a kind of bip sound to let me know that
the recognition is in process. it also lets me know when it finishes
recognizing the document. I don't get the same in nvda although I
press insert +r. it is dead silence. does this nvda OCR recognition
really work.



--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali







Re: nvda ocr

Sam Taylor
 

NVDA's OCR recognises the current navigator object, not the system focus. So make sure that you position the navigator object first at the place you think the OCR should occur, before pressing NVDA+R.

On 25/06/2020 7:51 pm, Aschalew Byness wrote:

The image is a scanned document. I open this scanned document with
Adobe reader. When I open it, nvda says: “Alert: Empty page  page
This page appears to be empty. It may contain a scanned image that
needs OCR or it may be part of a malformed document.” After getting
this message, I press insert +r. nvda says: ‘recognizing. Result
document.” After that, if I press insert +r, nvda says: ‘already in a
content recognition result’. If I arrow then, it reads: ‘blank”.

On 6/25/20, Aschalew Byness via groups.io
<gakidan.ashagre235@...> wrote:
yeah, I am using windows 10 2004 version. when I try to recognize an
image by pressing insert + r, there is nothing shown or heard. no bip
sound, no spoken outcome whether it is recognizing. even when I press
arrow keys, it simply says 'blank'. then How do I know whether it has
started recognizing. How do I know whether it has finished
recognising?

On 6/25/20, zahra <nasrinkhaksar3@...> wrote:
hello.
do you use windows ten?
if so, windows ten has internal ocr functionality that nvda developers
added support for it since nvda version 2017.3.
if you use any other windows version that has not internal ocr
capability, you should install ocr addon.

On 6/25/20, Aschalew Byness <gakidan.ashagre235@...> wrote:
Hi lovely guys
I always try to have nvda recognize image or scanned documents with
insert+r. I don't get any result though. but, in jaws, when I press
insert + space, o, c, I hear a kind of bip sound to let me know that
the recognition is in process. it also lets me know when it finishes
recognizing the document. I don't get the same in nvda although I
press insert +r. it is dead silence. does this nvda OCR recognition
really work.





--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali










Re: nvda ocr

Aschalew Byness
 

The image is a scanned document. I open this scanned document with
Adobe reader. When I open it, nvda says: “Alert: Empty page page
This page appears to be empty. It may contain a scanned image that
needs OCR or it may be part of a malformed document.” After getting
this message, I press insert +r. nvda says: ‘recognizing. Result
document.” After that, if I press insert +r, nvda says: ‘already in a
content recognition result’. If I arrow then, it reads: ‘blank”.

On 6/25/20, Aschalew Byness via groups.io
<gakidan.ashagre235=gmail.com@groups.io> wrote:
yeah, I am using windows 10 2004 version. when I try to recognize an
image by pressing insert + r, there is nothing shown or heard. no bip
sound, no spoken outcome whether it is recognizing. even when I press
arrow keys, it simply says 'blank'. then How do I know whether it has
started recognizing. How do I know whether it has finished
recognising?

On 6/25/20, zahra <nasrinkhaksar3@gmail.com> wrote:
hello.
do you use windows ten?
if so, windows ten has internal ocr functionality that nvda developers
added support for it since nvda version 2017.3.
if you use any other windows version that has not internal ocr
capability, you should install ocr addon.

On 6/25/20, Aschalew Byness <gakidan.ashagre235@gmail.com> wrote:
Hi lovely guys
I always try to have nvda recognize image or scanned documents with
insert+r. I don't get any result though. but, in jaws, when I press
insert + space, o, c, I hear a kind of bip sound to let me know that
the recognition is in process. it also lets me know when it finishes
recognizing the document. I don't get the same in nvda although I
press insert +r. it is dead silence. does this nvda OCR recognition
really work.




--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali






Re: nvda ocr

Ralf Kefferpuetz
 

For me under Win10 2004 and before NVDA-R says Recognizing And then Result document
Make sure the object containing the content you want to be OCR'ed is in focus.

Cheers,
Ralf

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Aschalew Byness
Sent: Donnerstag, 25. Juni 2020 11:12
To: nvda@nvda.groups.io
Subject: Re: [nvda] nvda ocr

yeah, I am using windows 10 2004 version. when I try to recognize an image by pressing insert + r, there is nothing shown or heard. no bip sound, no spoken outcome whether it is recognizing. even when I press arrow keys, it simply says 'blank'. then How do I know whether it has started recognizing. How do I know whether it has finished recognising?

On 6/25/20, zahra <nasrinkhaksar3@gmail.com> wrote:
hello.
do you use windows ten?
if so, windows ten has internal ocr functionality that nvda developers
added support for it since nvda version 2017.3.
if you use any other windows version that has not internal ocr
capability, you should install ocr addon.

On 6/25/20, Aschalew Byness <gakidan.ashagre235@gmail.com> wrote:
Hi lovely guys
I always try to have nvda recognize image or scanned documents with
insert+r. I don't get any result though. but, in jaws, when I press
insert + space, o, c, I hear a kind of bip sound to let me know that
the recognition is in process. it also lets me know when it finishes
recognizing the document. I don't get the same in nvda although I
press insert +r. it is dead silence. does this nvda OCR recognition
really work.




--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali




Re: nvda ocr

Luke Davis
 

Can you please provide some more information about how you are giving the image to NVDA?

How do you get the image?
What program are you in when you try to perform the OCR?
What is NVDA saying, right before you press insert+r?

Luke

On Thu, 25 Jun 2020, Aschalew Byness wrote:

Hi lovely guys
I always try to have nvda recognize image or scanned documents with
insert+r. I don't get any result though. but, in jaws, when I press
insert + space, o, c, I hear a kind of bip sound to let me know that
the recognition is in process. it also lets me know when it finishes
recognizing the document. I don't get the same in nvda although I
press insert +r. it is dead silence. does this nvda OCR recognition
really work.



Figured out what was causing the error sound when invoking the select synth dialogue under NVDA 2020.2 beta versions

Jacob Kruger
 

I had the NV speech player add-on installed, and, now, when ran through disabling all non-essential add-ons, and then re-enabling them one at a time, this was the one that immediately started causing NVDA's error sound to occur when I hit NVDA + ctrl + S to bring up the select synthesizer dialogue.


When I then re-visited the following add-ons page, and, re-downloaded it, and, re-installed it, it didn't seem to be causing the issue anymore:

https://addons.nvda-project.org/addons/nvSpeechPlayer.en.html


So, not sure if had an older version installed, or something else, but, just mentioning this here, in case.


Jacob Kruger
Blind Biker
Skype: BlindZA
"...resistance is futile...but, acceptance is versatile..."


Re: nvda ocr

Aschalew Byness
 

yeah, I am using windows 10 2004 version. when I try to recognize an
image by pressing insert + r, there is nothing shown or heard. no bip
sound, no spoken outcome whether it is recognizing. even when I press
arrow keys, it simply says 'blank'. then How do I know whether it has
started recognizing. How do I know whether it has finished
recognising?

On 6/25/20, zahra <nasrinkhaksar3@gmail.com> wrote:
hello.
do you use windows ten?
if so, windows ten has internal ocr functionality that nvda developers
added support for it since nvda version 2017.3.
if you use any other windows version that has not internal ocr
capability, you should install ocr addon.

On 6/25/20, Aschalew Byness <gakidan.ashagre235@gmail.com> wrote:
Hi lovely guys
I always try to have nvda recognize image or scanned documents with
insert+r. I don't get any result though. but, in jaws, when I press
insert + space, o, c, I hear a kind of bip sound to let me know that
the recognition is in process. it also lets me know when it finishes
recognizing the document. I don't get the same in nvda although I
press insert +r. it is dead silence. does this nvda OCR recognition
really work.




--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali




Re: nvda ocr

 

hello.
do you use windows ten?
if so, windows ten has internal ocr functionality that nvda developers
added support for it since nvda version 2017.3.
if you use any other windows version that has not internal ocr
capability, you should install ocr addon.

On 6/25/20, Aschalew Byness <gakidan.ashagre235@gmail.com> wrote:
Hi lovely guys
I always try to have nvda recognize image or scanned documents with
insert+r. I don't get any result though. but, in jaws, when I press
insert + space, o, c, I hear a kind of bip sound to let me know that
the recognition is in process. it also lets me know when it finishes
recognizing the document. I don't get the same in nvda although I
press insert +r. it is dead silence. does this nvda OCR recognition
really work.



--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali


nvda ocr

Aschalew Byness
 

Hi lovely guys
I always try to have nvda recognize image or scanned documents with
insert+r. I don't get any result though. but, in jaws, when I press
insert + space, o, c, I hear a kind of bip sound to let me know that
the recognition is in process. it also lets me know when it finishes
recognizing the document. I don't get the same in nvda although I
press insert +r. it is dead silence. does this nvda OCR recognition
really work.


In-Process is out and announcing the Big Beta Bug Bash!

Quentin Christensen
 

Hi everyone,

In This week's In-Process, the Big Beta Bug Bash (with shop vouchers!), details of NVDA 2020.2beta2, password managers to try and news of a new accessible card game! https://www.nvaccess.org/post/in-process-25th-june-2020/

Quentin.
--
Quentin Christensen
Training and Support Manager

5981 - 6000 of 80832