Date   

Re: NVDA Web Browser Problem

Gene New Zealand <hurrikennyandopo@...>
 

Come to think of it as well when i had maths player when it first came
out after i uninstalled it i got a problem like that. at the time the
only fix was to reinstall the maths player again then things went back
to normal. Not sure if the bug has been fixed in a update to it as i did
not reinstall it after that as it is some thing i may not use.


Gene nz

On 24/02/2017 10:29 AM, Louis Maher wrote:
Thank you Gene.

I now remember this discussion in the past. I believe the problem came from
removing MathPlayer which I have done in the past few months.

I tried the procedure listed below, and the problem persists in Firefox and
Internet Explorer.

Perhaps I will try Edge.

Thanks for your help.



Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher@...

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene New
Zealand
Sent: Thursday, February 23, 2017 1:44 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA Web Browser Problem

Hi Louis


I had some thing similar a while ago. it happened in mozilla thunder bird as
well as in mozilla fire fox.


When you went into mozilla fire fox even if you tabbed tried using arrow
keys single letter navigation keys etc it would also say unknown. Plus
the menus up the top would not work.


usually if the menus did not show you could use the f11 key to bring
them back but not in this case. So would get unknown in both programs.


it seemed some how some settings in mozilla fire fox had got corrupted

I can not remember if it happened in other programs i think they were
the only ones.


The way i was able to fix it was



I uninstalled mozilla fire fox from the add/remove programs section in
windows it might be called some thing else in other versions of windows.
it can be found under the control panel section.


When it has been done then Press the windows key + letter R to bring up
the run dialogue, then type in the following %appdata% then press the
enter key.


it will give you a list of folders and you will need to find the one for
mozilla

it will need to be deleted all together.


.


please note it will delete all of your settings then reinstall mozilla
fire fox, it then fixed the problem.

I also did the same as you did with nvda i uninstalled it from add
remove section and also did the other by pressing the Windows key +
letter R then typing in %appdata% then pressing the enter key, locating
the nvda folder and deleting it out then reinstalling nvda.
it was not NVDA that caused it but the other mozilla setting that i removed.

All has been good for months.

it may or may not be the same problem.

I thought about putting how to do this up on my website under the
trouble shooting section for nvda but only have heard it happen now and
again.

Gene nz

On 24/02/2017 7:48 AM, Louis Maher wrote:
Folks,

Several weeks ago, my NVDA (version 16.4) was unable to access Firefox
(51.?). When I opened a webpage, the arrow keys just said unknown when I
used them. I uninstalled NVDA and Firefox and re-installed both. I am
now
on NVDA 17.1), and I have the same issue.

Any suggestions would be appreciated.



Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher@...




--
<b>Check out the new location of my accessibility central website for NVDA tutorials, NVDA road tested programs, and other eyesight related topics.
http://www.accessibilitycentral.net/ If you would like to keep up to date with whats being updated on our website, you can also follow us on facebook by visiting
the following link https://en-gb.facebook.com/people/AccessibilityCentral-Net/100009727930216
Also, check out which New Zealand libraries have the NVDA screen reader available by visiting the following link http://www.aotearoapeoplesnetwork.org/content/partner-libraries


Re: LibreOffice again

Kevin Cussick
 

agreed, I hope it gets some love soon.

On 23/02/2017 11:27, Michel Such wrote:
+1!

Michel SUCH

michel.such@...
Skype : michel.such
Twitter : @SuchMichel

Le 23/02/2017 à 12:06, Walmir Schultz via Groups.Io a écrit :
Hi,

A new version of NVDA.

Many fixes and enhancements related to Excel and Word.

But...

And LibreOffice?

When will it get some attention?

All "annoyances", to not say plain incompatibilities, are still there.

Very sad!






Re: NVDA Web Browser Problem

Louis Maher <ljmaher@...>
 

Thanks Alexander.


Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher@...

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Alexander Masic
Sent: Thursday, February 23, 2017 3:15 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA Web Browser Problem

Personaly i feel myproblems using jaws together with Thunderbird is mutch
bigger then NVDA and thunderbird. Of course the blank row is a little
iritating. and something wich the devs should do something about.
But in genaral NVDA and thunderbird is far better then Jaws.




Den 2017-02-23 kl. 21:56, skrev Louis Maher:
Hi Gene,

jaws is working well.


Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher@...

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Gene New Zealand
Sent: Thursday, February 23, 2017 1:47 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA Web Browser Problem

Are you getting the same result with the jaws?


Gene nz



On 24/02/2017 8:41 AM, Louis Maher wrote:
Hi Arlene,

JAWS is my primary screen reader, and I do not have any issues with
it. I am trying to learn NVDA.


Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher@...

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Arlene
Sent: Thursday, February 23, 2017 1:31 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA Web Browser Problem

Hi, Do you have another back up screen reader to rectify your problem?
If you do, then try your back up screen reader and see if you have
that same problem! If NVDA is your primary screen reader you are in
trouble.
-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Louis Maher
Sent: February-23-17 10:49 AM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA Web Browser Problem

Folks,

Several weeks ago, my NVDA (version 16.4) was unable to access
Firefox (51.?). When I opened a webpage, the arrow keys just said
unknown when I used them. I uninstalled NVDA and Firefox and
re-installed both. I am now on NVDA 17.1), and I have the same issue.

Any suggestions would be appreciated.



Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher@...










--
<b>Check out the new location of my accessibility central website for
NVDA tutorials, NVDA road tested programs, and other eyesight related
topics.
http://www.accessibilitycentral.net/ If you would like to keep up to
date with whats being updated on our website, you can also follow us
on facebook by visiting the following link
https://en-gb.facebook.com/people/AccessibilityCentral-Net/10000972793
0216 Also, check out which New Zealand libraries have the NVDA screen
reader available by visiting the following link
http://www.aotearoapeoplesnetwork.org/content/partner-libraries







Re: NVDA Web Browser Problem

Louis Maher <ljmaher@...>
 

Thanks Gene.  I will look into this.

 

 

Regards

Louis Maher

Phone: 713-444-7838

E-mail: ljmaher@...

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Thursday, February 23, 2017 3:14 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA Web Browser Problem

 

Before uninstalling and reinstalling programs, try registering dll files in a procedure that has been discussed here before.  I don't know the procedure but it doesn't involve manually editing the registry.  It is a procedure to register one or more dll files.  If these files for some reason become unregistered, behavior such as you are describing will be seen.  The procedure involves typing and executing a command at the DOS prompt.  List members who have used it or know more about it will, I expect, discuss the matter further.  Uninstalling Firefox and NVDA may not solve the problem.  If it is the unregistered DLL files problem, it won't and considerable time and effort will have been wasted.  Registering the files is a quick and easy procedure.

 

Gene

----- Original Message -----

Sent: Thursday, February 23, 2017 2:56 PM

Subject: Re: [nvda] NVDA Web Browser Problem

 

Hi Gene,

jaws is working well.


Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher@...

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene New
Zealand
Sent: Thursday, February 23, 2017 1:47 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA Web Browser Problem

Are you getting the same result with the jaws?


Gene nz



On 24/02/2017 8:41 AM, Louis Maher wrote:
> Hi Arlene,
>
> JAWS is my primary screen reader, and I do not have any issues with
> it.  I am trying to learn NVDA.
>
>
> Regards
> Louis Maher
> Phone: 713-444-7838
> E-mail: ljmaher@...
>
> -----Original Message-----
> From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
> Arlene
> Sent: Thursday, February 23, 2017 1:31 PM
> To: nvda@nvda.groups.io
> Subject: Re: [nvda] NVDA Web Browser Problem
>
> Hi, Do you have another back up screen reader to rectify your problem?
> If you do, then try your back up screen reader and see if you have
> that same problem!  If NVDA is your primary screen reader you are in
trouble.
>
> -----Original Message-----
> From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
> Louis Maher
> Sent: February-23-17 10:49 AM
> To: nvda@nvda.groups.io
> Subject: [nvda] NVDA Web Browser Problem
>
> Folks,
>
> Several weeks ago, my NVDA (version 16.4) was unable to access Firefox
> (51.?).  When I opened a webpage, the arrow keys just said unknown
> when I used them.  I uninstalled NVDA and Firefox and re-installed
> both.  I am now on NVDA 17.1), and I have the same issue.
>
> Any suggestions would be appreciated.
>
>
>
> Regards
> Louis Maher
> Phone: 713-444-7838
> E-mail: ljmaher@...
>
>
>
>
>
>
>
>
>
>
>

--
<b>Check out the new location of my accessibility central website for NVDA
tutorials, NVDA road tested programs, and other eyesight related topics.
http://www.accessibilitycentral.net/ If you would like to keep up to date
with whats being updated on our website, you can also follow us on facebook
by visiting the following link
https://en-gb.facebook.com/people/AccessibilityCentral-Net/100009727930216
Also, check out which New Zealand libraries have the NVDA screen reader
available by visiting the following link
http://www.aotearoapeoplesnetwork.org/content/partner-libraries






Re: NVDA Web Browser Problem

Louis Maher <ljmaher@...>
 

Thank you Gene.

I now remember this discussion in the past. I believe the problem came from
removing MathPlayer which I have done in the past few months.

I tried the procedure listed below, and the problem persists in Firefox and
Internet Explorer.

Perhaps I will try Edge.

Thanks for your help.



Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher@...

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene New
Zealand
Sent: Thursday, February 23, 2017 1:44 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA Web Browser Problem

Hi Louis


I had some thing similar a while ago. it happened in mozilla thunder bird as
well as in mozilla fire fox.


When you went into mozilla fire fox even if you tabbed tried using arrow
keys single letter navigation keys etc it would also say unknown. Plus
the menus up the top would not work.


usually if the menus did not show you could use the f11 key to bring
them back but not in this case. So would get unknown in both programs.


it seemed some how some settings in mozilla fire fox had got corrupted

I can not remember if it happened in other programs i think they were
the only ones.


The way i was able to fix it was



I uninstalled mozilla fire fox from the add/remove programs section in
windows it might be called some thing else in other versions of windows.
it can be found under the control panel section.


When it has been done then Press the windows key + letter R to bring up
the run dialogue, then type in the following %appdata% then press the
enter key.


it will give you a list of folders and you will need to find the one for
mozilla

it will need to be deleted all together.


.


please note it will delete all of your settings then reinstall mozilla
fire fox, it then fixed the problem.

I also did the same as you did with nvda i uninstalled it from add
remove section and also did the other by pressing the Windows key +
letter R then typing in %appdata% then pressing the enter key, locating
the nvda folder and deleting it out then reinstalling nvda.
it was not NVDA that caused it but the other mozilla setting that i removed.

All has been good for months.

it may or may not be the same problem.

I thought about putting how to do this up on my website under the
trouble shooting section for nvda but only have heard it happen now and
again.

Gene nz

On 24/02/2017 7:48 AM, Louis Maher wrote:
Folks,

Several weeks ago, my NVDA (version 16.4) was unable to access Firefox
(51.?). When I opened a webpage, the arrow keys just said unknown when I
used them. I uninstalled NVDA and Firefox and re-installed both. I am
now
on NVDA 17.1), and I have the same issue.

Any suggestions would be appreciated.



Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher@...




--
<b>Check out the new location of my accessibility central website for NVDA
tutorials, NVDA road tested programs, and other eyesight related topics.
http://www.accessibilitycentral.net/ If you would like to keep up to date
with whats being updated on our website, you can also follow us on facebook
by visiting
the following link
https://en-gb.facebook.com/people/AccessibilityCentral-Net/100009727930216
Also, check out which New Zealand libraries have the NVDA screen reader
available by visiting the following link
http://www.aotearoapeoplesnetwork.org/content/partner-libraries


Re: NVDA Web Browser Problem

Alexander Masic
 

Personaly i feel myproblems using jaws together with Thunderbird is mutch bigger then NVDA and thunderbird. Of course the blank row is a little iritating. and something wich the devs should do something about. But in genaral NVDA and thunderbird is far better then Jaws.




Den 2017-02-23 kl. 21:56, skrev Louis Maher:

Hi Gene,

jaws is working well.


Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher@...

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene New
Zealand
Sent: Thursday, February 23, 2017 1:47 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA Web Browser Problem

Are you getting the same result with the jaws?


Gene nz



On 24/02/2017 8:41 AM, Louis Maher wrote:
Hi Arlene,

JAWS is my primary screen reader, and I do not have any issues with
it. I am trying to learn NVDA.


Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher@...

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Arlene
Sent: Thursday, February 23, 2017 1:31 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA Web Browser Problem

Hi, Do you have another back up screen reader to rectify your problem?
If you do, then try your back up screen reader and see if you have
that same problem! If NVDA is your primary screen reader you are in
trouble.
-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Louis Maher
Sent: February-23-17 10:49 AM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA Web Browser Problem

Folks,

Several weeks ago, my NVDA (version 16.4) was unable to access Firefox
(51.?). When I opened a webpage, the arrow keys just said unknown
when I used them. I uninstalled NVDA and Firefox and re-installed
both. I am now on NVDA 17.1), and I have the same issue.

Any suggestions would be appreciated.



Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher@...










--
<b>Check out the new location of my accessibility central website for NVDA
tutorials, NVDA road tested programs, and other eyesight related topics.
http://www.accessibilitycentral.net/ If you would like to keep up to date
with whats being updated on our website, you can also follow us on facebook
by visiting the following link
https://en-gb.facebook.com/people/AccessibilityCentral-Net/100009727930216
Also, check out which New Zealand libraries have the NVDA screen reader
available by visiting the following link
http://www.aotearoapeoplesnetwork.org/content/partner-libraries






Re: NVDA Web Browser Problem

Gene
 

Before uninstalling and reinstalling programs, try registering dll files in a procedure that has been discussed here before.  I don't know the procedure but it doesn't involve manually editing the registry.  It is a procedure to register one or more dll files.  If these files for some reason become unregistered, behavior such as you are describing will be seen.  The procedure involves typing and executing a command at the DOS prompt.  List members who have used it or know more about it will, I expect, discuss the matter further.  Uninstalling Firefox and NVDA may not solve the problem.  If it is the unregistered DLL files problem, it won't and considerable time and effort will have been wasted.  Registering the files is a quick and easy procedure.
 
Gene

----- Original Message -----
Sent: Thursday, February 23, 2017 2:56 PM
Subject: Re: [nvda] NVDA Web Browser Problem

Hi Gene,

jaws is working well.


Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher@...

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene New
Zealand
Sent: Thursday, February 23, 2017 1:47 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA Web Browser Problem

Are you getting the same result with the jaws?


Gene nz



On 24/02/2017 8:41 AM, Louis Maher wrote:
> Hi Arlene,
>
> JAWS is my primary screen reader, and I do not have any issues with
> it.  I am trying to learn NVDA.
>
>
> Regards
> Louis Maher
> Phone: 713-444-7838
> E-mail: ljmaher@...
>
> -----Original Message-----
> From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
> Arlene
> Sent: Thursday, February 23, 2017 1:31 PM
> To: nvda@nvda.groups.io
> Subject: Re: [nvda] NVDA Web Browser Problem
>
> Hi, Do you have another back up screen reader to rectify your problem?
> If you do, then try your back up screen reader and see if you have
> that same problem!  If NVDA is your primary screen reader you are in
trouble.
>
> -----Original Message-----
> From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
> Louis Maher
> Sent: February-23-17 10:49 AM
> To: nvda@nvda.groups.io
> Subject: [nvda] NVDA Web Browser Problem
>
> Folks,
>
> Several weeks ago, my NVDA (version 16.4) was unable to access Firefox
> (51.?).  When I opened a webpage, the arrow keys just said unknown
> when I used them.  I uninstalled NVDA and Firefox and re-installed
> both.  I am now on NVDA 17.1), and I have the same issue.
>
> Any suggestions would be appreciated.
>
>
>
> Regards
> Louis Maher
> Phone: 713-444-7838
> E-mail: ljmaher@...
>
>
>
>
>
>
>
>
>
>
>

--
<b>Check out the new location of my accessibility central website for NVDA
tutorials, NVDA road tested programs, and other eyesight related topics.
http://www.accessibilitycentral.net/ If you would like to keep up to date
with whats being updated on our website, you can also follow us on facebook
by visiting the following link
https://en-gb.facebook.com/people/AccessibilityCentral-Net/100009727930216
Also, check out which New Zealand libraries have the NVDA screen reader
available by visiting the following link
http://www.aotearoapeoplesnetwork.org/content/partner-libraries







Re: NVDA Web Browser Problem

Louis Maher <ljmaher@...>
 

Hi Gene,

jaws is working well.


Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher@...

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene New
Zealand
Sent: Thursday, February 23, 2017 1:47 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA Web Browser Problem

Are you getting the same result with the jaws?


Gene nz



On 24/02/2017 8:41 AM, Louis Maher wrote:
Hi Arlene,

JAWS is my primary screen reader, and I do not have any issues with
it. I am trying to learn NVDA.


Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher@...

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Arlene
Sent: Thursday, February 23, 2017 1:31 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA Web Browser Problem

Hi, Do you have another back up screen reader to rectify your problem?
If you do, then try your back up screen reader and see if you have
that same problem! If NVDA is your primary screen reader you are in
trouble.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Louis Maher
Sent: February-23-17 10:49 AM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA Web Browser Problem

Folks,

Several weeks ago, my NVDA (version 16.4) was unable to access Firefox
(51.?). When I opened a webpage, the arrow keys just said unknown
when I used them. I uninstalled NVDA and Firefox and re-installed
both. I am now on NVDA 17.1), and I have the same issue.

Any suggestions would be appreciated.



Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher@...










--
<b>Check out the new location of my accessibility central website for NVDA
tutorials, NVDA road tested programs, and other eyesight related topics.
http://www.accessibilitycentral.net/ If you would like to keep up to date
with whats being updated on our website, you can also follow us on facebook
by visiting the following link
https://en-gb.facebook.com/people/AccessibilityCentral-Net/100009727930216
Also, check out which New Zealand libraries have the NVDA screen reader
available by visiting the following link
http://www.aotearoapeoplesnetwork.org/content/partner-libraries


Re: NVDA reporting tables in windows explorer

Andre Fisher
 

Well, what you can try is disabling table announcement in NVDA's
document formatting settings. Note that this would be the default
behaviour unless you create a new profile for the explorer
application. Press Ctrl+NVDA+P, then go to New profile, followed by
choosing current application (explorer) in the radio buttons. Then
make the changes to document formatting afterwards.

On 2/23/17, erik burggraaf <erik@...> wrote:
Hi all,

On this new windows seven machine I set up with NVDA, most but not all
folders in windows explorer are reporting to be laid out in tables by NVDA.

NVDA is reporting row and column positions of folders and files. Not all
folders are doing this, but I applied all the settings of a folder that
wasn't to all folders and that didn't fix the behavior. Any ideas as to
changes I might make to the views so that they become standard list views?

Thanks,

Erik

Sent with AquaMail for Android
http://www.aqua-mail.com






Re: two issues

Sam Bushman
 

Interesting, I just fixed the menu not speaking problem. For some reason an
nvidia control panel waqs up. I finally got rid of that and the speech came
back.
Thanks,
Sam


Sam Bushman
LibertyRoundTable.com
801-756-9133

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene New
Zealand
Sent: Thursday, February 23, 2017 1:39 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] two issues

Hi


There are 2 commands the first is for a desk top pc and the second is for a
lap top.


Say all
NVDA+downArrow
NVDA+a
Starts reading from the current position of the system caret, moving it
along as it goes


Gene nz



On 24/02/2017 9:26 AM, Sam Bushman wrote:
NVDA speaks when I am not trying to view the menus. On all other pc's when
I
press the down arrow it works great but, on this machine it doesn't speak
when we try to arrow trough the menus in nvda.


Sam Bushman
LibertyRoundTable.com
801-756-9133

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
New
Zealand
Sent: Thursday, February 23, 2017 1:18 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] two issues

Hi Sam


if you do a say all use the nvda key + down arrow key it will read the
whole
message and you will not hear blank lines where they are. you only hear
them
if you do it a line at a time by using the down arrow key each time.


I find it useful hearing them when writing up stuff.

The command was for a desk top pc.


the second question that you asked if NVDA is talking when you bring up
the
preferences menu, just use the down arrow key and it will speak the first
item on the menu and where ever you go to in the menus with the arrow
keys.


Or is it some thing else like nvda not speaking at all on the pc?


Gene nz




On 24/02/2017 8:53 AM, Sam Bushman wrote:
Hi All,

I have two main issues with NVDA that are causing me trouble.

1. When I read email in outlook 2016 office 365 I get tons of blank
lines in the email. Is there a way to get rid of them?

Second: I have a machine with NVDA 17.1 on it, when I bring up the
NVDA menus they don't speak. Any ideas what I need to resolve?

Thanks so much for any input.

Sam




--
<b>Check out the new location of my accessibility central website for NVDA
tutorials, NVDA road tested programs, and other eyesight related topics.
http://www.accessibilitycentral.net/ If you would like to keep up to date
with whats being updated on our website, you can also follow us on
facebook
by visiting the following link
https://en-gb.facebook.com/people/AccessibilityCentral-Net/100009727930216
Also, check out which New Zealand libraries have the NVDA screen reader
available by visiting the following link
http://www.aotearoapeoplesnetwork.org/content/partner-libraries






--
<b>Check out the new location of my accessibility central website for NVDA
tutorials, NVDA road tested programs, and other eyesight related topics.
http://www.accessibilitycentral.net/ If you would like to keep up to date
with whats being updated on our website, you can also follow us on facebook
by visiting
the following link
https://en-gb.facebook.com/people/AccessibilityCentral-Net/100009727930216
Also, check out which New Zealand libraries have the NVDA screen reader
available by visiting the following link
http://www.aotearoapeoplesnetwork.org/content/partner-libraries


Re: two issues

Gene New Zealand <hurrikennyandopo@...>
 

is the menus in focus for nvda if not you might be able to see them but
doesn not mean nvda is focused on them. There may be another windows
open that it is looking at.


some times using the alt key + tab key once or two times will do the trick.


Gene nz

On 24/02/2017 9:26 AM, Sam Bushman wrote:
NVDA speaks when I am not trying to view the menus. On all other pc's when I
press the down arrow it works great but, on this machine it doesn't speak
when we try to arrow trough the menus in nvda.


Sam Bushman
LibertyRoundTable.com
801-756-9133

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene New
Zealand
Sent: Thursday, February 23, 2017 1:18 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] two issues

Hi Sam


if you do a say all use the nvda key + down arrow key it will read the whole
message and you will not hear blank lines where they are. you only hear them
if you do it a line at a time by using the down arrow key each time.


I find it useful hearing them when writing up stuff.

The command was for a desk top pc.


the second question that you asked if NVDA is talking when you bring up the
preferences menu, just use the down arrow key and it will speak the first
item on the menu and where ever you go to in the menus with the arrow keys.


Or is it some thing else like nvda not speaking at all on the pc?


Gene nz




On 24/02/2017 8:53 AM, Sam Bushman wrote:
Hi All,

I have two main issues with NVDA that are causing me trouble.

1. When I read email in outlook 2016 office 365 I get tons of blank
lines in the email. Is there a way to get rid of them?

Second: I have a machine with NVDA 17.1 on it, when I bring up the
NVDA menus they don't speak. Any ideas what I need to resolve?

Thanks so much for any input.

Sam




--
<b>Check out the new location of my accessibility central website for NVDA
tutorials, NVDA road tested programs, and other eyesight related topics.
http://www.accessibilitycentral.net/ If you would like to keep up to date
with whats being updated on our website, you can also follow us on facebook
by visiting the following link
https://en-gb.facebook.com/people/AccessibilityCentral-Net/100009727930216
Also, check out which New Zealand libraries have the NVDA screen reader
available by visiting the following link
http://www.aotearoapeoplesnetwork.org/content/partner-libraries






--
<b>Check out the new location of my accessibility central website for NVDA tutorials, NVDA road tested programs, and other eyesight related topics.
http://www.accessibilitycentral.net/ If you would like to keep up to date with whats being updated on our website, you can also follow us on facebook by visiting
the following link https://en-gb.facebook.com/people/AccessibilityCentral-Net/100009727930216
Also, check out which New Zealand libraries have the NVDA screen reader available by visiting the following link http://www.aotearoapeoplesnetwork.org/content/partner-libraries


Re: two issues

Gene New Zealand <hurrikennyandopo@...>
 

Hi


There are 2 commands the first is for a desk top pc and the second is
for a lap top.


Say all
NVDA+downArrow
NVDA+a
Starts reading from the current position of the system caret, moving it
along as it goes


Gene nz

On 24/02/2017 9:26 AM, Sam Bushman wrote:
NVDA speaks when I am not trying to view the menus. On all other pc's when I
press the down arrow it works great but, on this machine it doesn't speak
when we try to arrow trough the menus in nvda.


Sam Bushman
LibertyRoundTable.com
801-756-9133

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene New
Zealand
Sent: Thursday, February 23, 2017 1:18 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] two issues

Hi Sam


if you do a say all use the nvda key + down arrow key it will read the whole
message and you will not hear blank lines where they are. you only hear them
if you do it a line at a time by using the down arrow key each time.


I find it useful hearing them when writing up stuff.

The command was for a desk top pc.


the second question that you asked if NVDA is talking when you bring up the
preferences menu, just use the down arrow key and it will speak the first
item on the menu and where ever you go to in the menus with the arrow keys.


Or is it some thing else like nvda not speaking at all on the pc?


Gene nz




On 24/02/2017 8:53 AM, Sam Bushman wrote:
Hi All,

I have two main issues with NVDA that are causing me trouble.

1. When I read email in outlook 2016 office 365 I get tons of blank
lines in the email. Is there a way to get rid of them?

Second: I have a machine with NVDA 17.1 on it, when I bring up the
NVDA menus they don't speak. Any ideas what I need to resolve?

Thanks so much for any input.

Sam




--
<b>Check out the new location of my accessibility central website for NVDA
tutorials, NVDA road tested programs, and other eyesight related topics.
http://www.accessibilitycentral.net/ If you would like to keep up to date
with whats being updated on our website, you can also follow us on facebook
by visiting the following link
https://en-gb.facebook.com/people/AccessibilityCentral-Net/100009727930216
Also, check out which New Zealand libraries have the NVDA screen reader
available by visiting the following link
http://www.aotearoapeoplesnetwork.org/content/partner-libraries






--
<b>Check out the new location of my accessibility central website for NVDA tutorials, NVDA road tested programs, and other eyesight related topics.
http://www.accessibilitycentral.net/ If you would like to keep up to date with whats being updated on our website, you can also follow us on facebook by visiting
the following link https://en-gb.facebook.com/people/AccessibilityCentral-Net/100009727930216
Also, check out which New Zealand libraries have the NVDA screen reader available by visiting the following link http://www.aotearoapeoplesnetwork.org/content/partner-libraries


TheBlaze Daily PM

Sam Bushman
 

Hi All,

 

Below is an example of a message with lots of blank lines with tables etc.

When I press NVDA-down arrow it doesn’t ready the complete message.

Any help would be most appreciated.

 

Thanks,

Sam

 

 

From: TheBlaze Daily PM [mailto:mailer@...]
Sent: Thursday, February 23, 2017 1:05 PM
To: sb1@...
Subject: TheBlaze Daily PM

 

GOP senator won’t vote to repeal Obamacare Medicaid expansion. Also: Sean Hannity apologizes after sharing ‘inaccurate article’ calling McCain a ‘war criminal’

TheBlaze

Having trouble viewing this email? Click here

Join TheBlaze, earn rewards and change the world!

Hi, TheBlaze Fan! Here are today’s top stories…

 

 

Designed with pride in Dallas by

TheBlaze

© 2017 TheBlaze Inc. All Rights Reserved.

TheBlaze
6301 Riverside Dr, Building 1
Irving, TX 75039

Manage your email preferences


Re: two issues

Sam Bushman
 

NVDA speaks when I am not trying to view the menus. On all other pc's when I
press the down arrow it works great but, on this machine it doesn't speak
when we try to arrow trough the menus in nvda.


Sam Bushman
LibertyRoundTable.com
801-756-9133

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene New
Zealand
Sent: Thursday, February 23, 2017 1:18 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] two issues

Hi Sam


if you do a say all use the nvda key + down arrow key it will read the whole
message and you will not hear blank lines where they are. you only hear them
if you do it a line at a time by using the down arrow key each time.


I find it useful hearing them when writing up stuff.

The command was for a desk top pc.


the second question that you asked if NVDA is talking when you bring up the
preferences menu, just use the down arrow key and it will speak the first
item on the menu and where ever you go to in the menus with the arrow keys.


Or is it some thing else like nvda not speaking at all on the pc?


Gene nz




On 24/02/2017 8:53 AM, Sam Bushman wrote:
Hi All,

I have two main issues with NVDA that are causing me trouble.

1. When I read email in outlook 2016 office 365 I get tons of blank
lines in the email. Is there a way to get rid of them?

Second: I have a machine with NVDA 17.1 on it, when I bring up the
NVDA menus they don't speak. Any ideas what I need to resolve?

Thanks so much for any input.

Sam




--
<b>Check out the new location of my accessibility central website for NVDA
tutorials, NVDA road tested programs, and other eyesight related topics.
http://www.accessibilitycentral.net/ If you would like to keep up to date
with whats being updated on our website, you can also follow us on facebook
by visiting the following link
https://en-gb.facebook.com/people/AccessibilityCentral-Net/100009727930216
Also, check out which New Zealand libraries have the NVDA screen reader
available by visiting the following link
http://www.aotearoapeoplesnetwork.org/content/partner-libraries


Re: two issues

Gene New Zealand <hurrikennyandopo@...>
 

Hi Sam


if you do a say all use the nvda key + down arrow key it will read the
whole message and you will not hear blank lines where they are. you only
hear them if you do it a line at a time by using the down arrow key each
time.


I find it useful hearing them when writing up stuff.

The command was for a desk top pc.


the second question that you asked if NVDA is talking when you bring up
the preferences menu, just use the down arrow key and it will speak the
first item on the menu and where ever you go to in the menus with the
arrow keys.


Or is it some thing else like nvda not speaking at all on the pc?


Gene nz

On 24/02/2017 8:53 AM, Sam Bushman wrote:
Hi All,

I have two main issues with NVDA that are causing me trouble.

1. When I read email in outlook 2016 office 365 I get tons of blank lines
in the email. Is there a way to get rid of them?

Second: I have a machine with NVDA 17.1 on it, when I bring up the NVDA
menus they don't speak. Any ideas what I need to resolve?

Thanks so much for any input.

Sam




--
<b>Check out the new location of my accessibility central website for NVDA tutorials, NVDA road tested programs, and other eyesight related topics.
http://www.accessibilitycentral.net/ If you would like to keep up to date with whats being updated on our website, you can also follow us on facebook by visiting
the following link https://en-gb.facebook.com/people/AccessibilityCentral-Net/100009727930216
Also, check out which New Zealand libraries have the NVDA screen reader available by visiting the following link http://www.aotearoapeoplesnetwork.org/content/partner-libraries


Re: two issues

Gene
 

Are you reading messages by down arrowing through them?  That's really cumbersome and inefficient..  I know of no skip blank lines feature in NVDA.  If you use read to end, you won't hear blank lines spoken as blank.  You will just hear messages read just as any documents in other programs. 
 
Genee

----- Original Message -----
Sent: Thursday, February 23, 2017 1:53 PM
Subject: [nvda] two issues

Hi All,

I have two main issues with NVDA that are causing me trouble.

1.  When I read email in outlook 2016 office 365 I get tons of blank lines
in the email. Is there a way to get rid of them?

Second: I have a machine with NVDA 17.1 on it, when I bring up the NVDA
menus they don't speak. Any ideas what I need to resolve?

Thanks so much for any input.

Sam





two issues

Sam Bushman
 

Hi All,

I have two main issues with NVDA that are causing me trouble.

1. When I read email in outlook 2016 office 365 I get tons of blank lines
in the email. Is there a way to get rid of them?

Second: I have a machine with NVDA 17.1 on it, when I bring up the NVDA
menus they don't speak. Any ideas what I need to resolve?

Thanks so much for any input.

Sam


Re: NVDA Web Browser Problem

Gene New Zealand <hurrikennyandopo@...>
 

Are you getting the same result with the jaws?


Gene nz

On 24/02/2017 8:41 AM, Louis Maher wrote:
Hi Arlene,

JAWS is my primary screen reader, and I do not have any issues with it. I
am trying to learn NVDA.


Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher@...

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Arlene
Sent: Thursday, February 23, 2017 1:31 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA Web Browser Problem

Hi, Do you have another back up screen reader to rectify your problem? If
you do, then try your back up screen reader and see if you have that same
problem! If NVDA is your primary screen reader you are in trouble.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Louis
Maher
Sent: February-23-17 10:49 AM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA Web Browser Problem

Folks,

Several weeks ago, my NVDA (version 16.4) was unable to access Firefox
(51.?). When I opened a webpage, the arrow keys just said unknown when I
used them. I uninstalled NVDA and Firefox and re-installed both. I am now
on NVDA 17.1), and I have the same issue.

Any suggestions would be appreciated.



Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher@...










--
<b>Check out the new location of my accessibility central website for NVDA tutorials, NVDA road tested programs, and other eyesight related topics.
http://www.accessibilitycentral.net/ If you would like to keep up to date with whats being updated on our website, you can also follow us on facebook by visiting
the following link https://en-gb.facebook.com/people/AccessibilityCentral-Net/100009727930216
Also, check out which New Zealand libraries have the NVDA screen reader available by visiting the following link http://www.aotearoapeoplesnetwork.org/content/partner-libraries


Re: NVDA Web Browser Problem

Gene New Zealand <hurrikennyandopo@...>
 

Hi Louis


I had some thing similar a while ago. it happened in mozilla thunder
bird as well as in mozilla fire fox.


When you went into mozilla fire fox even if you tabbed tried using arrow
keys single letter navigation keys etc it would also say unknown. Plus
the menus up the top would not work.


usually if the menus did not show you could use the f11 key to bring
them back but not in this case. So would get unknown in both programs.


it seemed some how some settings in mozilla fire fox had got corrupted

I can not remember if it happened in other programs i think they were
the only ones.


The way i was able to fix it was



I uninstalled mozilla fire fox from the add/remove programs section in
windows it might be called some thing else in other versions of windows.
it can be found under the control panel section.


When it has been done then Press the windows key + letter R to bring up
the run dialogue, then type in the following %appdata% then press the
enter key.


it will give you a list of folders and you will need to find the one for
mozilla

it will need to be deleted all together.


.


please note it will delete all of your settings then reinstall mozilla
fire fox, it then fixed the problem.

I also did the same as you did with nvda i uninstalled it from add
remove section and also did the other by pressing the Windows key +
letter R then typing in %appdata% then pressing the enter key, locating
the nvda folder and deleting it out then reinstalling nvda.
it was not NVDA that caused it but the other mozilla setting that i removed.

All has been good for months.

it may or may not be the same problem.

I thought about putting how to do this up on my website under the
trouble shooting section for nvda but only have heard it happen now and
again.

Gene nz

On 24/02/2017 7:48 AM, Louis Maher wrote:
Folks,

Several weeks ago, my NVDA (version 16.4) was unable to access Firefox
(51.?). When I opened a webpage, the arrow keys just said unknown when I
used them. I uninstalled NVDA and Firefox and re-installed both. I am now
on NVDA 17.1), and I have the same issue.

Any suggestions would be appreciated.



Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher@...




--
<b>Check out the new location of my accessibility central website for NVDA tutorials, NVDA road tested programs, and other eyesight related topics.
http://www.accessibilitycentral.net/ If you would like to keep up to date with whats being updated on our website, you can also follow us on facebook by visiting
the following link https://en-gb.facebook.com/people/AccessibilityCentral-Net/100009727930216
Also, check out which New Zealand libraries have the NVDA screen reader available by visiting the following link http://www.aotearoapeoplesnetwork.org/content/partner-libraries


Re: NVDA Web Browser Problem

Louis Maher <ljmaher@...>
 

Hi Arlene,

JAWS is my primary screen reader, and I do not have any issues with it. I
am trying to learn NVDA.


Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher@...

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Arlene
Sent: Thursday, February 23, 2017 1:31 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA Web Browser Problem

Hi, Do you have another back up screen reader to rectify your problem? If
you do, then try your back up screen reader and see if you have that same
problem! If NVDA is your primary screen reader you are in trouble.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Louis
Maher
Sent: February-23-17 10:49 AM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA Web Browser Problem

Folks,

Several weeks ago, my NVDA (version 16.4) was unable to access Firefox
(51.?). When I opened a webpage, the arrow keys just said unknown when I
used them. I uninstalled NVDA and Firefox and re-installed both. I am now
on NVDA 17.1), and I have the same issue.

Any suggestions would be appreciated.



Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher@...