Date   

Re: NVDA and outlook questions

Chris Smart
 

microsoft may know the answer to that one.



On 2020-12-30 2:01 a.m., Arlene wrote:

Hey, speaking of outlook. If I upgrade from outlook 2010 with my outlook key. Do I have to pay for the upgrade?  I don’t care if I do. I am inquiring.  Thanks.  

 

Sent from Mail for Windows 10

 

From: Dan Miner via groups.io
Sent: December 29, 2020 10:57 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA and outlook questions

 

Your version number suggests you have some kind of subscription and Office 365 is the only recent offerings I know of.  So, if that is the case you probably just need to login to your Microsoft account (via the File menu using that account management option) and update.  I did just that about 2 weeks ago.

 

Compared to 2016, the latest Office has been working better in my experiences.  Even the calendar is becoming more and more useable.

 

 

    Dan

> On Dec 29, 2020, at 6:52 PM, Dennis L <dennisl1982@...> wrote:

>

> Does outlook 2019 work better?

>

> -----Original Message-----

> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Dan Miner via

> groups.io

> Sent: Tuesday, December 29, 2020 5:28 PM

> To: nvda@nvda.groups.io

> Subject: Re: [nvda] NVDA and outlook questions

>

> Well, if it is a 2016 based version then you likely will have the problem of

> it not reading suggestions easily.  I always had to fiddle around with it to

> get anything.  I vaguely remember using object navigation to dive into the

> enclosing frame   It I was truly needing to use that feature, I would just

> switch to JAWS 18 and it would read in a more natural way.  I would give

> recent Narrator a try and see how it fairs with that dropdown.

>

>    Dan

> -----Original Message-----

> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Dennis L

> Sent: Tuesday, December 29, 2020 8:57 AM

> To: nvda@nvda.groups.io

> Subject: Re: [nvda] NVDA and outlook questions

>

> I believe it is 2016.  This is the version number I got when I used jaws and

> got the version number.

> Microsoft Outlook Subscription Version 16.0.13426.20404 -----Original

> Message-----

> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Dan Miner via

> groups.io

> Sent: Tuesday, December 29, 2020 10:43 AM

> To: nvda@nvda.groups.io

> Subject: Re: [nvda] NVDA and outlook questions

>

> I have Outlook from Office 365 and if I recall this thread was about the To

> field and reading the type-ahead suggestion reading?  When I was using

> Outlook 2016, I had this problem of it not reading but I did a bit of

> testing again on this version.  It seems to be working fine with the type

> ahead for reading the first suggestion and changing as I progress on typing.

> Also, a simple down arrow will read the remaining suggestions.  I don't

> recall which version you have but I am wondering if that is a factor here.

>

> -----Original Message-----

> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Dennis L

> Sent: Tuesday, December 29, 2020 12:28 AM

> To: nvda@nvda.groups.io

> Subject: Re: [nvda] NVDA and outlook questions

>

> There is no outlook setting I know of where I have to adjust it for the

> screen reader to properly read other screen readers read it.  so should

> NVDA.

>

> -----Original Message-----

> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of David Griffith

> Sent: Tuesday, December 29, 2020 12:40 AM

> To: nvda@nvda.groups.io

> Subject: Re: [nvda] NVDA and outlook questions

>

>

> I think there is a setting.

> You need to go to, in Outlook to File then Options and then under Mail find

> the setting which says Automatic Name checking  and make sure that that is

> checked.

> I have this checked and if Dennis does not then this may explain the

> different behaviour.

> David G.

> -----Original Message-----

> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gene

> Sent: 29 December 2020 03:39

> To: nvda@nvda.groups.io

> Subject: Re: [nvda] NVDA and outlook questions

>

> I know of no such setting.  This is very likely another instance where you

> have to help the screen-reader in some way by using read current line as you

> type.  I don't know why Outlook is different, in the address bar in the

> browsers I use, autocomplete will read as what I type changes.

>

> Gene

> -----Original Message-----

> From: Dennis L

> Sent: Monday, December 28, 2020 7:26 PM

> To: nvda@nvda.groups.io

> Subject: Re: [nvda] NVDA and outlook questions

>

>

>

> I have the setting

>

> Automatic say on page load unchecked.  I was able to get it to read the

> first suggestion but not more suggestions.  Example if I type j and joe

> smith is first it will read that if I continue typing and type john it won’t

> read John smith can this be changed that it will continuously read the

> suggestions?

>

>

>

> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of David Griffith

> Sent: Monday, December 28, 2020 5:58 PM

> To: nvda@nvda.groups.io

> Subject: Re: [nvda] NVDA and outlook questions

>

>

>

>

>

> This is slightly odd as this is precisely hwat NVDA does for me in Outlook.

> I have just tried it and if I press K the most recent email I have typed

>

>

>

> whose name begins with K. Pressing the down arrow reveals other addresses

> beginning with K.

>

>

>

>

>

>

>

> I wonder if there is a setting in Outlook about keeping recent addresses you

> need to turn on?

>

>

>

> Having said that it is also true that this feature does not, for me at

> least,  any longer, reveal results from all your contacts. I often have to

> go into the to button and search in there to reveal all my addresses in

> contacts.

>

>

>

> David G.

>

>

>

> On 28/12/2020 21:56, Dennis L wrote:

>

>

>

> Hi, I was wondering is there a way to get NVDA to automatically read the

> suggestions that come up when you are typing the address or persons name who

> the message is to?

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

 

 

 

 

 

 


Re: NVDA and outlook questions

Arlene
 

Hey, speaking of outlook. If I upgrade from outlook 2010 with my outlook key. Do I have to pay for the upgrade?  I don’t care if I do. I am inquiring.  Thanks.  

 

Sent from Mail for Windows 10

 

From: Dan Miner via groups.io
Sent: December 29, 2020 10:57 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA and outlook questions

 

Your version number suggests you have some kind of subscription and Office 365 is the only recent offerings I know of.  So, if that is the case you probably just need to login to your Microsoft account (via the File menu using that account management option) and update.  I did just that about 2 weeks ago.

 

Compared to 2016, the latest Office has been working better in my experiences.  Even the calendar is becoming more and more useable.

 

 

    Dan

> On Dec 29, 2020, at 6:52 PM, Dennis L <dennisl1982@...> wrote:

>

> Does outlook 2019 work better?

>

> -----Original Message-----

> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Dan Miner via

> groups.io

> Sent: Tuesday, December 29, 2020 5:28 PM

> To: nvda@nvda.groups.io

> Subject: Re: [nvda] NVDA and outlook questions

>

> Well, if it is a 2016 based version then you likely will have the problem of

> it not reading suggestions easily.  I always had to fiddle around with it to

> get anything.  I vaguely remember using object navigation to dive into the

> enclosing frame   It I was truly needing to use that feature, I would just

> switch to JAWS 18 and it would read in a more natural way.  I would give

> recent Narrator a try and see how it fairs with that dropdown.

>

>    Dan

> -----Original Message-----

> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Dennis L

> Sent: Tuesday, December 29, 2020 8:57 AM

> To: nvda@nvda.groups.io

> Subject: Re: [nvda] NVDA and outlook questions

>

> I believe it is 2016.  This is the version number I got when I used jaws and

> got the version number.

> Microsoft Outlook Subscription Version 16.0.13426.20404 -----Original

> Message-----

> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Dan Miner via

> groups.io

> Sent: Tuesday, December 29, 2020 10:43 AM

> To: nvda@nvda.groups.io

> Subject: Re: [nvda] NVDA and outlook questions

>

> I have Outlook from Office 365 and if I recall this thread was about the To

> field and reading the type-ahead suggestion reading?  When I was using

> Outlook 2016, I had this problem of it not reading but I did a bit of

> testing again on this version.  It seems to be working fine with the type

> ahead for reading the first suggestion and changing as I progress on typing.

> Also, a simple down arrow will read the remaining suggestions.  I don't

> recall which version you have but I am wondering if that is a factor here.

>

> -----Original Message-----

> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Dennis L

> Sent: Tuesday, December 29, 2020 12:28 AM

> To: nvda@nvda.groups.io

> Subject: Re: [nvda] NVDA and outlook questions

>

> There is no outlook setting I know of where I have to adjust it for the

> screen reader to properly read other screen readers read it.  so should

> NVDA.

>

> -----Original Message-----

> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of David Griffith

> Sent: Tuesday, December 29, 2020 12:40 AM

> To: nvda@nvda.groups.io

> Subject: Re: [nvda] NVDA and outlook questions

>

>

> I think there is a setting.

> You need to go to, in Outlook to File then Options and then under Mail find

> the setting which says Automatic Name checking  and make sure that that is

> checked.

> I have this checked and if Dennis does not then this may explain the

> different behaviour.

> David G.

> -----Original Message-----

> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gene

> Sent: 29 December 2020 03:39

> To: nvda@nvda.groups.io

> Subject: Re: [nvda] NVDA and outlook questions

>

> I know of no such setting.  This is very likely another instance where you

> have to help the screen-reader in some way by using read current line as you

> type.  I don't know why Outlook is different, in the address bar in the

> browsers I use, autocomplete will read as what I type changes.

>

> Gene

> -----Original Message-----

> From: Dennis L

> Sent: Monday, December 28, 2020 7:26 PM

> To: nvda@nvda.groups.io

> Subject: Re: [nvda] NVDA and outlook questions

>

>

>

> I have the setting

>

> Automatic say on page load unchecked.  I was able to get it to read the

> first suggestion but not more suggestions.  Example if I type j and joe

> smith is first it will read that if I continue typing and type john it won’t

> read John smith can this be changed that it will continuously read the

> suggestions?

>

>

>

> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of David Griffith

> Sent: Monday, December 28, 2020 5:58 PM

> To: nvda@nvda.groups.io

> Subject: Re: [nvda] NVDA and outlook questions

>

>

>

>

>

> This is slightly odd as this is precisely hwat NVDA does for me in Outlook.

> I have just tried it and if I press K the most recent email I have typed

>

>

>

> whose name begins with K. Pressing the down arrow reveals other addresses

> beginning with K.

>

>

>

>

>

>

>

> I wonder if there is a setting in Outlook about keeping recent addresses you

> need to turn on?

>

>

>

> Having said that it is also true that this feature does not, for me at

> least,  any longer, reveal results from all your contacts. I often have to

> go into the to button and search in there to reveal all my addresses in

> contacts.

>

>

>

> David G.

>

>

>

> On 28/12/2020 21:56, Dennis L wrote:

>

>

>

> Hi, I was wondering is there a way to get NVDA to automatically read the

> suggestions that come up when you are typing the address or persons name who

> the message is to?

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

 

 

 

 

 

 


Re: Admin's Notes Re List Conduct, Please Read #adminnotice

Arlene
 

  Happy  New year to you all. What! Brian has vision? I didn’t know that! Nor do I care that he does.  I thought he was totally blind like most people on the list.  The reason I thought he was blind like us is because he talks in a way that most of us blind users talk wile operating our computers.  Well, all the world to him looking after this list. 

 

Sent from Mail for Windows 10

 

From: Nimer Jaber
Sent: December 29, 2020 9:52 PM
To: NVDA@nvda.groups.io
Subject: [nvda] Admin's Notes Re List Conduct, Please Read #adminnotice

 

Hello everyone,

 

Here's hoping this message finds you well, and if you celebrate the new year, then happy early New Year!

 

I want to be very clear on an issue which has risen on this list. I want to make sure my words are plain, so if you don't understand, please reach out to nvda+owner@nvda.groups.io and I will help clarify for you.

 

Brian has, and will continue to have my full support as a moderator of this list. I have not seen any reason why he should not enjoy my support, and I have not had anyone contact me to state why my support is misplaced. Notice I did not say anything about Brian's vision status, gender, race, or anything else. I said Brian, as a human being, enjoys my full support.

 

As all of us are humans, and as the world has so many issues dividing us, please, let's not allow vision, or the lack of it, dictate how we treat one another. Discrimination takes many forms, and I believe, it is no better to discriminate regarding an individual's site than it is an individual's lack of it, or an individual's skin color, ethnicity, or any other characteristic. I take this seriously, as you all should, because we have many issues going on in the world today, and I definitely believe that whether an individual has sight or not should not be one of those issues.

 

If you have a problem with Brian's responses because of the fact that he has vision, then I suggest you learn to lose your narrow-mindedness and find a more welcoming list for your ignorance. You could, of course, learn to use your email filters. Nonetheless, I will not tolerate any discrimination on this list, and will treat such transgressions severely. This may mean loss of posting privileges, or a ban altogether, something I do not do lightly.

 

I hope that the incident that happened today does not repeat itself, yet be assured that discrimination is against the NVAccess code of conduct, Groups.IO rules, this list's rules, and my personal moral code, so I hope you will all understand where I am coming from on this.

 

Thank you for your membership to this list. We are nearly at 1,500 members, all from various cultures and walks of life, all from various countries. The one thing that binds us all is our humanity. Thank you for being you, thank you for being part of this community, and thank you for your time in reading this message and your understanding of this matter. I hope we can all respect one another in the way that every human deserves.

 

--

Best,

Nimer Jaber

The message above is intended for the recipient to whom it was
addressed. If you believe that you are not the intended recipient,
please notify me via reply email and destroy all copies of this
correspondence. Action taken as a result of this email or its contents
by anyone other than the intended recipient(s) may result in civil or
criminal charges. I have checked this email and all corresponding
attachments for security threats.


Registered Linux User 529141.
http://counter.li.org/

To find out about a free, open-source, and versatile screen reader for Windows, visit nvaccess.org

You can follow @nimerjaber on Twitter for the latest technology news.

To contact me, you can reply to this email or you may call me at (970) (393-4481) and I will do my best to respond to you promptly.

 

Thank you, and have a great day!

 


Re: NVDA and outlook questions

Dan Miner
 

Your version number suggests you have some kind of subscription and Office 365 is the only recent offerings I know of. So, if that is the case you probably just need to login to your Microsoft account (via the File menu using that account management option) and update. I did just that about 2 weeks ago.

Compared to 2016, the latest Office has been working better in my experiences. Even the calendar is becoming more and more useable.


Dan

On Dec 29, 2020, at 6:52 PM, Dennis L <dennisl1982@gmail.com> wrote:

Does outlook 2019 work better?

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Dan Miner via
groups.io
Sent: Tuesday, December 29, 2020 5:28 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA and outlook questions

Well, if it is a 2016 based version then you likely will have the problem of
it not reading suggestions easily. I always had to fiddle around with it to
get anything. I vaguely remember using object navigation to dive into the
enclosing frame It I was truly needing to use that feature, I would just
switch to JAWS 18 and it would read in a more natural way. I would give
recent Narrator a try and see how it fairs with that dropdown.

Dan
-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Dennis L
Sent: Tuesday, December 29, 2020 8:57 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA and outlook questions

I believe it is 2016. This is the version number I got when I used jaws and
got the version number.
Microsoft Outlook Subscription Version 16.0.13426.20404 -----Original
Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Dan Miner via
groups.io
Sent: Tuesday, December 29, 2020 10:43 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA and outlook questions

I have Outlook from Office 365 and if I recall this thread was about the To
field and reading the type-ahead suggestion reading? When I was using
Outlook 2016, I had this problem of it not reading but I did a bit of
testing again on this version. It seems to be working fine with the type
ahead for reading the first suggestion and changing as I progress on typing.
Also, a simple down arrow will read the remaining suggestions. I don't
recall which version you have but I am wondering if that is a factor here.

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Dennis L
Sent: Tuesday, December 29, 2020 12:28 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA and outlook questions

There is no outlook setting I know of where I have to adjust it for the
screen reader to properly read other screen readers read it. so should
NVDA.

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of David Griffith
Sent: Tuesday, December 29, 2020 12:40 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA and outlook questions


I think there is a setting.
You need to go to, in Outlook to File then Options and then under Mail find
the setting which says Automatic Name checking and make sure that that is
checked.
I have this checked and if Dennis does not then this may explain the
different behaviour.
David G.
-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gene
Sent: 29 December 2020 03:39
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA and outlook questions

I know of no such setting. This is very likely another instance where you
have to help the screen-reader in some way by using read current line as you
type. I don't know why Outlook is different, in the address bar in the
browsers I use, autocomplete will read as what I type changes.

Gene
-----Original Message-----
From: Dennis L
Sent: Monday, December 28, 2020 7:26 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA and outlook questions



I have the setting

Automatic say on page load unchecked. I was able to get it to read the
first suggestion but not more suggestions. Example if I type j and joe
smith is first it will read that if I continue typing and type john it won’t
read John smith can this be changed that it will continuously read the
suggestions?



From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of David Griffith
Sent: Monday, December 28, 2020 5:58 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA and outlook questions





This is slightly odd as this is precisely hwat NVDA does for me in Outlook.
I have just tried it and if I press K the most recent email I have typed



whose name begins with K. Pressing the down arrow reveals other addresses
beginning with K.







I wonder if there is a setting in Outlook about keeping recent addresses you
need to turn on?



Having said that it is also true that this feature does not, for me at
least, any longer, reveal results from all your contacts. I often have to
go into the to button and search in there to reveal all my addresses in
contacts.



David G.



On 28/12/2020 21:56, Dennis L wrote:



Hi, I was wondering is there a way to get NVDA to automatically read the
suggestions that come up when you are typing the address or persons name who
the message is to?














































Word 2013 ribbon and NVDA 2020.3

bering.p
 

Hi Lucas.
I cannot send you  the log with this e-mail address:
lukasz.golonka@...
So I try to send it on the list.
Attached is the log.
Best regards.
   
Paul.
Le 29/12/2020 21:29, Lukasz Golonka via groups.io a écrit :

I might be able to fix this but I don't have access to any Office 2013
machine. Would you be able to provide me a log as follows:

Restart with add-ons disabled.
Set log level to debug
In NVDA's advanced settings  in the debug logging group enable MSAA
logging category - ensure that all other categories are disabled to
declutter the log.
- Try tabbing through the ribbon when it is collapsed.

Please send content of the log viewer privately to me.



Re: problems using NVDA with my new laptop

Hareth
 

Hi Betsy,
Try using the "home" and "end" buttons for top and bottom of lists.
And ctrl plus home hotkey for the top of a message and opened text
file and ctrl plus end hotkey for the bottom of it, that works for
some type of lists as well if the 1st one didn't work.
As for the laptops Numlock key mostly
you can do it with pressing the "FN" key combined with another mostly
in the numbers row, and re do it to unlock its a toggle.
The best and easy way to find it is to invoke the NVDA's key helper
mode with hitting the NVDA plus number 1 to turn it on, and test your
keys, press the same hotkey to get out of it.
Happy new year to you and your family.

On 12/29/20, Betsy Grenevitch <blindangel61@gmail.com> wrote:
I received a new laptop and my daughter thought she had exported
everything properly but a lot of the NVDA commands are not working such
as going to the top of a list of emails, going to the top of a file etc.
I am using Windows 10 and the NVDA is set to desktop layout.


I would definitely appreciate if someone could help me figure out what
is going on.


It is an Asus laptop.


Thanks.


--
Betsy Grenevitch 678-862-3876






Re: problems using NVDA with my new laptop

Andre Fisher
 
Edited

Hi.

This happens because NVDA, by default and with both keyboard layouts, uses the Numpad for object navigation, screen review and review cursor functions.

To use the Home, Page up, End, Page Down and other key capabilities of the Numpad, please download the add-on on this page. Read the instructions before you do, so you will be able to configure the settings to your liking.

https://addons.nvda-project.org/addons/numpadNavMode.en.html

Cheers.
Andre


Admin's Notes Re List Conduct, Please Read #adminnotice

Nimer Jaber
 

Hello everyone,

Here's hoping this message finds you well, and if you celebrate the new year, then happy early New Year!

I want to be very clear on an issue which has risen on this list. I want to make sure my words are plain, so if you don't understand, please reach out to nvda+owner@nvda.groups.io and I will help clarify for you.

Brian has, and will continue to have my full support as a moderator of this list. I have not seen any reason why he should not enjoy my support, and I have not had anyone contact me to state why my support is misplaced. Notice I did not say anything about Brian's vision status, gender, race, or anything else. I said Brian, as a human being, enjoys my full support.

As all of us are humans, and as the world has so many issues dividing us, please, let's not allow vision, or the lack of it, dictate how we treat one another. Discrimination takes many forms, and I believe, it is no better to discriminate regarding an individual's site than it is an individual's lack of it, or an individual's skin color, ethnicity, or any other characteristic. I take this seriously, as you all should, because we have many issues going on in the world today, and I definitely believe that whether an individual has sight or not should not be one of those issues.

If you have a problem with Brian's responses because of the fact that he has vision, then I suggest you learn to lose your narrow-mindedness and find a more welcoming list for your ignorance. You could, of course, learn to use your email filters. Nonetheless, I will not tolerate any discrimination on this list, and will treat such transgressions severely. This may mean loss of posting privileges, or a ban altogether, something I do not do lightly.

I hope that the incident that happened today does not repeat itself, yet be assured that discrimination is against the NVAccess code of conduct, Groups.IO rules, this list's rules, and my personal moral code, so I hope you will all understand where I am coming from on this.

Thank you for your membership to this list. We are nearly at 1,500 members, all from various cultures and walks of life, all from various countries. The one thing that binds us all is our humanity. Thank you for being you, thank you for being part of this community, and thank you for your time in reading this message and your understanding of this matter. I hope we can all respect one another in the way that every human deserves.

--
Best,

Nimer Jaber

The message above is intended for the recipient to whom it was
addressed. If you believe that you are not the intended recipient,
please notify me via reply email and destroy all copies of this
correspondence. Action taken as a result of this email or its contents
by anyone other than the intended recipient(s) may result in civil or
criminal charges. I have checked this email and all corresponding
attachments for security threats.

Registered Linux User 529141.
http://counter.li.org/

To find out about a free, open-source, and versatile screen reader for Windows, visit nvaccess.org

You can follow @nimerjaber on Twitter for the latest technology news.

To contact me, you can reply to this email or you may call me at (970) (393-4481) and I will do my best to respond to you promptly.

Thank you, and have a great day!


Re: problems using NVDA with my new laptop

George McCoy
 

On my desktop computer, NVDA returns to screen review when restarted, evan if the configuration is saved with object review turned on.

On 12/29/2020 7:50 PM, Gene wrote:
I don't think I've checked.  I'll check and report.  My view is that the mode should automatically be changed to object review when you leave the window you are in but, though I've presented that view on the list before, there seems to be little or no interest in the change.

I can recall times when I've used review mode, forgotten to switch, gone on to do something else, and then I later realized that I was getting unexpected results because I hadn't switched back to object review mode.  I susp;ect that happens to a lot of people and they don't make the connection.

If I close  NVDA and reopen it, I am placed back in object review mode.  As another interesting point, when I apply the saved configuration command while in screen review mode, NVDA key r, I remain in screen-review mode.
Gene
-----Original Message----- From: Brian Vogel
Sent: Tuesday, December 29, 2020 7:09 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] problems using NVDA with my new laptop

On Tue, Dec 29, 2020 at 07:52 PM, Gene wrote:
Issue the command numpad insert numpad 1 until you hear no previous review mode.  If you changed review modes at some point, you may well have unexpected results.-
Gene, you may know, but does the last used review mode "stick" if you exit NVDA and start it again?  I honestly have no idea, but would have presumed that will switch it back to what's typical if you've never changed it, period.


Re: DVD ripper that works with NVDA?

Ian Blackburn
 

yes VLC will be able to play the ISO of the dvd once loaded

have fun

Ian

On 30/12/2020 1:43 pm, George McCoy wrote:

Thanks, Brian.  I'll give it a try with VLC first.


On 12/29/2020 2:15 PM, Brian Vogel wrote:
On Tue, Dec 29, 2020 at 02:16 PM, George McCoy wrote:
No, I mean .iso images of dvd disks that I want to mount and then rip in windows 10.
-
George,

             I saw your longer reply as well.  Do you actually need to rip them?  I would think that once you mount this sort of ISO as a virtual DVD you should be able to play it directly from that virtual DVD directory.  But what I cannot remember is what "the beginning of DVD content" is named file-wise.

             One of the huge advantages in newer versions of Windows is that you can mount ISO files as virtual media and have Windows "play with it" as though it were that media itself.  If push comes to shove, I'd try mounting one, then opening the media player of your choosing, and trying to play that drive that's really not a drive but that Windows has set up as though it were upon mounting.

              Yours is an unusual situation, but it may be easier to resolve by doing little to nothing.  It will take some playing to see.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

[Regarding the Supreme Court refusing to hear the case brought by Texas to overturn the votes certified by 4 states:Pleased with the SCOTUS ruling, but also immediately slightly terrified of where this crazy train goes next.  We should know by now there’s a bottomless supply of crazy.

        ~ Brendan Buck, former adviser to Speakers of the House Paul Ryan and John Boehner 

 


Re: DVD ripper that works with NVDA?

George McCoy
 

Thanks, Brian.  I'll give it a try with VLC first.


On 12/29/2020 2:15 PM, Brian Vogel wrote:
On Tue, Dec 29, 2020 at 02:16 PM, George McCoy wrote:
No, I mean .iso images of dvd disks that I want to mount and then rip in windows 10.
-
George,

             I saw your longer reply as well.  Do you actually need to rip them?  I would think that once you mount this sort of ISO as a virtual DVD you should be able to play it directly from that virtual DVD directory.  But what I cannot remember is what "the beginning of DVD content" is named file-wise.

             One of the huge advantages in newer versions of Windows is that you can mount ISO files as virtual media and have Windows "play with it" as though it were that media itself.  If push comes to shove, I'd try mounting one, then opening the media player of your choosing, and trying to play that drive that's really not a drive but that Windows has set up as though it were upon mounting.

              Yours is an unusual situation, but it may be easier to resolve by doing little to nothing.  It will take some playing to see.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

[Regarding the Supreme Court refusing to hear the case brought by Texas to overturn the votes certified by 4 states:Pleased with the SCOTUS ruling, but also immediately slightly terrified of where this crazy train goes next.  We should know by now there’s a bottomless supply of crazy.

        ~ Brendan Buck, former adviser to Speakers of the House Paul Ryan and John Boehner 

 


Re: problems using NVDA with my new laptop

Gene
 

I don't know if this will help and if the numpad isn't working as expected, you'll still have the problem, but if you open an e-mail you should be able to read it using the standard arrow keys and the read to end command. You can read it with the numpad if it is working as expected as well, but if it isn't, reading the e-mail as you would any document will work.

Gene

-----Original Message-----
From: Betsy Grenevitch
Sent: Tuesday, December 29, 2020 8:56 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] problems using NVDA with my new laptop

Thank you for trying. At least now I have figured out a way around to
get a couple of my most used commands to work. With my memory issues, it
takes me a lot longer now to learn new things and I have to write down
all of the steps.


Thank you for those who have given suggestions.

On 12/29/2020 9:50 PM, Gene wrote:
I don't know the variations of how numpads work on laptops. Perhaps your numpad requires some other key to be used in conjunction with it to get it to work as a numpaed usually does. But those with more knowledge of the subject may have suggestions. Yes, I'm talking about just pressing something like numpad 7 or 8 by itself.

Gene
-----Original Message----- From: Betsy Grenevitch
Sent: Tuesday, December 29, 2020 8:23 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] problems using NVDA with my new laptop



Gene, I have used numpad very little until getting this laptop. I assume you mean just pushing the numpad 7 by itself when nomlock is off, right? If that is the case it does not do anything if it can be used in an email as that is where I tried it. When I push any of those three numbers it just says clipboard. If you would like for me to write you privately, please let me know.







On 12/29/2020 7:52 PM, Gene wrote:


it might help clarify things if we knew the answer to the following question:

When you use numpad commands by themselves, do they work correctly? In other words, does numpad 8 read the current line of the object you are on? Does numpad 7 move to the previous line and numpad 9 move to the next line?





I also did a bit of experimentation and if a current or near current version of NVDA is being used, it doesn't matter, for what we are discussing, if laptop or desktop mode is being used. it may for other commands, but the numpad review commands such as shift 7, 8, and 9, work in both modes. Before continuing with any experimentation, do the following to make completely sure you are working in the correct screen-review mode:

Issue the command numpad insert numpad 1 until you hear no previous review mode. If you changed review modes at some point, you may well have unexpected results.





Gene


On 12/29/2020 6:16 PM, Brian Vogel wrote:
On Tue, Dec 29, 2020 at 06:40 PM, Nevzat Adil wrote:
Since you are using a laptop NVDA should be on laptop keyboard layout.-
I'm sorry, but that's incorrect and, in actuality, very seldom the case or necessary. If you have a laptop that has a number pad as part of its built in keyboard NVDA installs using desktop keyboard layout because it can since all the keys are there.

I only have folks use laptop layout if they are already familiar with it and prefer it, or if they have a laptop that does not have a number pad as part of its built in keyboard. That is the minority of laptops produced today.
--
Betsy Grenevitch 678-862-3876


Re: problems using NVDA with my new laptop

Betsy Grenevitch
 

Thank you for trying. At least now I have figured out a way around to get a couple of my most used commands to work. With my memory issues, it takes me a lot longer now to learn new things and I have to write down all of the steps.


Thank you for those who have given suggestions.

On 12/29/2020 9:50 PM, Gene wrote:
I don't know the variations of how numpads work on laptops.  Perhaps your numpad requires some other key to be used in conjunction with it to get it to work as a numpaed usually does.  But those with more knowledge of the subject may have suggestions.  Yes, I'm talking about just pressing something like numpad 7 or 8 by itself.

Gene
-----Original Message----- From: Betsy Grenevitch
Sent: Tuesday, December 29, 2020 8:23 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] problems using NVDA with my new laptop



Gene, I have used numpad very little until getting this laptop. I assume you mean just pushing the numpad 7 by itself when nomlock is off, right? If that is the case it does not do anything if it can be used in an email as that is where I tried it. When I push any of those three numbers it just says clipboard. If you would like for me to write you privately, please let me know.







On 12/29/2020 7:52 PM, Gene wrote:


it might help clarify things if we knew the answer to the following question:

When you use numpad commands by themselves, do they work correctly?  In other words, does numpad 8 read the current line of the object you are on? Does numpad 7 move to the previous line and numpad 9 move to the next line?





I also did a bit of experimentation and if a current or near current version of NVDA is being used, it doesn't matter, for what we are discussing, if laptop or desktop mode is being used.  it may for other commands, but the numpad review commands such as shift 7, 8, and 9, work in both modes. Before continuing with any experimentation, do the following to make completely sure you are working in the correct screen-review mode:

Issue the command numpad insert numpad 1 until you hear no previous review mode.  If you changed review modes at some point, you may well have unexpected results.





Gene


On 12/29/2020 6:16 PM, Brian Vogel wrote:
On Tue, Dec 29, 2020 at 06:40 PM, Nevzat Adil wrote:
Since you are using a laptop NVDA should be on laptop keyboard layout.-
I'm sorry, but that's incorrect and, in actuality, very seldom the case or necessary.  If you have a laptop that has a number pad as part of its built in keyboard NVDA installs using desktop keyboard layout because it can since all the keys are there.

I only have folks use laptop layout if they are already familiar with it and prefer it, or if they have a laptop that does not have a number pad as part of its built in keyboard.  That is the minority of laptops produced today.
--
Betsy Grenevitch 678-862-3876


Re: problems using NVDA with my new laptop

Gene
 

I don't know the variations of how numpads work on laptops. Perhaps your numpad requires some other key to be used in conjunction with it to get it to work as a numpaed usually does. But those with more knowledge of the subject may have suggestions. Yes, I'm talking about just pressing something like numpad 7 or 8 by itself.

Gene

-----Original Message-----
From: Betsy Grenevitch
Sent: Tuesday, December 29, 2020 8:23 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] problems using NVDA with my new laptop



Gene, I have used numpad very little until getting this laptop. I assume you mean just pushing the numpad 7 by itself when nomlock is off, right? If that is the case it does not do anything if it can be used in an email as that is where I tried it. When I push any of those three numbers it just says clipboard. If you would like for me to write you privately, please let me know.







On 12/29/2020 7:52 PM, Gene wrote:


it might help clarify things if we knew the answer to the following question:

When you use numpad commands by themselves, do they work correctly? In other words, does numpad 8 read the current line of the object you are on? Does numpad 7 move to the previous line and numpad 9 move to the next line?





I also did a bit of experimentation and if a current or near current version of NVDA is being used, it doesn't matter, for what we are discussing, if laptop or desktop mode is being used. it may for other commands, but the numpad review commands such as shift 7, 8, and 9, work in both modes. Before continuing with any experimentation, do the following to make completely sure you are working in the correct screen-review mode:

Issue the command numpad insert numpad 1 until you hear no previous review mode. If you changed review modes at some point, you may well have unexpected results.





Gene


On 12/29/2020 6:16 PM, Brian Vogel wrote:
On Tue, Dec 29, 2020 at 06:40 PM, Nevzat Adil wrote:
Since you are using a laptop NVDA should be on laptop keyboard layout.-
I'm sorry, but that's incorrect and, in actuality, very seldom the case or necessary. If you have a laptop that has a number pad as part of its built in keyboard NVDA installs using desktop keyboard layout because it can since all the keys are there.

I only have folks use laptop layout if they are already familiar with it and prefer it, or if they have a laptop that does not have a number pad as part of its built in keyboard. That is the minority of laptops produced today.
--


Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042

[Regarding the Supreme Court refusing to hear the case brought by Texas to overturn the votes certified by 4 states:] Pleased with the SCOTUS ruling, but also immediately slightly terrified of where this crazy train goes next. We should know by now there’s a bottomless supply of crazy.

~ Brendan Buck, former adviser to Speakers of the House Paul Ryan and John Boehner




--
Betsy Grenevitch 678-862-3876


Re: problems using NVDA with my new laptop

Betsy Grenevitch
 

Gene, I have used numpad very little until getting this laptop. I assume you mean just pushing the numpad 7 by itself when nomlock is off, right? If that is the case it does not do anything if it can be used in an email as that is where I tried it. When I push any of those three numbers it just says clipboard. If you would like for me to write you privately, please let me know.



On 12/29/2020 7:52 PM, Gene wrote:

it might help clarify things if we knew the answer to the following question:

When you use numpad commands by themselves, do they work correctly?  In other words, does numpad 8 read the current line of the object you are on?  Does numpad 7 move to the previous line and numpad 9 move to the next line? 


I also did a bit of experimentation and if a current or near current version of NVDA is being used, it doesn't matter, for what we are discussing, if laptop or desktop mode is being used.  it may for other commands, but the numpad review commands such as shift 7, 8, and 9, work in both modes.  Before continuing with any experimentation, do the following to make completely sure you are working in the correct screen-review mode:

Issue the command numpad insert numpad 1 until you hear no previous review mode.  If you changed review modes at some point, you may well have unexpected results.


Gene

On 12/29/2020 6:16 PM, Brian Vogel wrote:
On Tue, Dec 29, 2020 at 06:40 PM, Nevzat Adil wrote:
Since you are using a laptop NVDA should be on laptop keyboard layout.
-
I'm sorry, but that's incorrect and, in actuality, very seldom the case or necessary.  If you have a laptop that has a number pad as part of its built in keyboard NVDA installs using desktop keyboard layout because it can since all the keys are there.

I only have folks use laptop layout if they are already familiar with it and prefer it, or if they have a laptop that does not have a number pad as part of its built in keyboard.  That is the minority of laptops produced today.
--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

[Regarding the Supreme Court refusing to hear the case brought by Texas to overturn the votes certified by 4 states:Pleased with the SCOTUS ruling, but also immediately slightly terrified of where this crazy train goes next.  We should know by now there’s a bottomless supply of crazy.

        ~ Brendan Buck, former adviser to Speakers of the House Paul Ryan and John Boehner 

 

--
Betsy Grenevitch 678-862-3876


Re: DVD ripper that works with NVDA?

tim
 

Simple, You send it to a vertual dvd and then ripe the audio track from it.
A lot have ben doing that for dsv tracks for over ten years or more.

On 12/29/2020 2:12 PM, Brian Vogel wrote:
On Tue, Dec 29, 2020 at 02:07 PM, tim wrote:
Or, he just wants to ripe the audio track from a dvd iso file.
Not everything is a sighted world.
-
Well, Tim, then please explain how one rips from an ISO.  I have never heard a single instance of the term "rip" being used where the ISO file is the media being ripped from.
In addition, this has absolutely nothing whatsoever with sighted versus blind, but speaking clearly, so I'd appreciate a bit of respect and consideration.  Asking for clarification is not disrespectful, nor was it done disrespectfully.  And when you play the stupid "blind vs sighted" card when it has nothing to do with any thing it is you that looks bad.
--
Brian -Windows 10 Pro, 64-Bit, Version 20H2, Build 19042
[Regarding the Supreme Court refusing to hear the case brought by Texas to overturn the votes certified by 4 states:] /Pleased with the SCOTUS ruling, but also immediately slightly terrified of where this crazy train goes next.  We should know by now there’s a bottomless supply of crazy./
        ~ Brendan Buck, /former adviser to Speakers of the House Paul Ryan and John Boehner/


Re: NVDA and outlook questions

Dennis L <dennisl1982@...>
 

Does outlook 2019 work better?

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Dan Miner via groups.io
Sent: Tuesday, December 29, 2020 5:28 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA and outlook questions

Well, if it is a 2016 based version then you likely will have the problem of it not reading suggestions easily. I always had to fiddle around with it to get anything. I vaguely remember using object navigation to dive into the enclosing frame It I was truly needing to use that feature, I would just switch to JAWS 18 and it would read in a more natural way. I would give recent Narrator a try and see how it fairs with that dropdown.

Dan
-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Dennis L
Sent: Tuesday, December 29, 2020 8:57 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA and outlook questions

I believe it is 2016. This is the version number I got when I used jaws and got the version number.
Microsoft Outlook Subscription Version 16.0.13426.20404 -----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Dan Miner via groups.io
Sent: Tuesday, December 29, 2020 10:43 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA and outlook questions

I have Outlook from Office 365 and if I recall this thread was about the To field and reading the type-ahead suggestion reading? When I was using Outlook 2016, I had this problem of it not reading but I did a bit of testing again on this version. It seems to be working fine with the type ahead for reading the first suggestion and changing as I progress on typing. Also, a simple down arrow will read the remaining suggestions. I don't recall which version you have but I am wondering if that is a factor here.

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Dennis L
Sent: Tuesday, December 29, 2020 12:28 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA and outlook questions

There is no outlook setting I know of where I have to adjust it for the screen reader to properly read other screen readers read it. so should NVDA.

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of David Griffith
Sent: Tuesday, December 29, 2020 12:40 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA and outlook questions


I think there is a setting.
You need to go to, in Outlook to File then Options and then under Mail find the setting which says Automatic Name checking and make sure that that is checked.
I have this checked and if Dennis does not then this may explain the different behaviour.
David G.
-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gene
Sent: 29 December 2020 03:39
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA and outlook questions

I know of no such setting. This is very likely another instance where you have to help the screen-reader in some way by using read current line as you type. I don't know why Outlook is different, in the address bar in the browsers I use, autocomplete will read as what I type changes.

Gene
-----Original Message-----
From: Dennis L
Sent: Monday, December 28, 2020 7:26 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA and outlook questions



I have the setting

Automatic say on page load unchecked. I was able to get it to read the first suggestion but not more suggestions. Example if I type j and joe smith is first it will read that if I continue typing and type john it won’t read John smith can this be changed that it will continuously read the suggestions?



From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of David Griffith
Sent: Monday, December 28, 2020 5:58 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA and outlook questions





This is slightly odd as this is precisely hwat NVDA does for me in Outlook.
I have just tried it and if I press K the most recent email I have typed



whose name begins with K. Pressing the down arrow reveals other addresses beginning with K.







I wonder if there is a setting in Outlook about keeping recent addresses you need to turn on?



Having said that it is also true that this feature does not, for me at least, any longer, reveal results from all your contacts. I often have to go into the to button and search in there to reveal all my addresses in contacts.



David G.



On 28/12/2020 21:56, Dennis L wrote:



Hi, I was wondering is there a way to get NVDA to automatically read the suggestions that come up when you are typing the address or persons name who the message is to?


Re: problems using NVDA with my new laptop

Gene
 

I don't think I've checked. I'll check and report. My view is that the mode should automatically be changed to object review when you leave the window you are in but, though I've presented that view on the list before, there seems to be little or no interest in the change.

I can recall times when I've used review mode, forgotten to switch, gone on to do something else, and then I later realized that I was getting unexpected results because I hadn't switched back to object review mode. I susp;ect that happens to a lot of people and they don't make the connection.

If I close NVDA and reopen it, I am placed back in object review mode. As another interesting point, when I apply the saved configuration command while in screen review mode, NVDA key r, I remain in screen-review mode.
Gene

-----Original Message-----
From: Brian Vogel
Sent: Tuesday, December 29, 2020 7:09 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] problems using NVDA with my new laptop

On Tue, Dec 29, 2020 at 07:52 PM, Gene wrote:
Issue the command numpad insert numpad 1 until you hear no previous review mode. If you changed review modes at some point, you may well have unexpected results.-
Gene, you may know, but does the last used review mode "stick" if you exit NVDA and start it again? I honestly have no idea, but would have presumed that will switch it back to what's typical if you've never changed it, period.
--


Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042

[Regarding the Supreme Court refusing to hear the case brought by Texas to overturn the votes certified by 4 states:] Pleased with the SCOTUS ruling, but also immediately slightly terrified of where this crazy train goes next. We should know by now there’s a bottomless supply of crazy.

~ Brendan Buck, former adviser to Speakers of the House Paul Ryan and John Boehner


Re: problems using NVDA with my new laptop

 

On Tue, Dec 29, 2020 at 07:52 PM, Gene wrote:
Issue the command numpad insert numpad 1 until you hear no previous review mode.  If you changed review modes at some point, you may well have unexpected results.
-
Gene, you may know, but does the last used review mode "stick" if you exit NVDA and start it again?  I honestly have no idea, but would have presumed that will switch it back to what's typical if you've never changed it, period.
--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

[Regarding the Supreme Court refusing to hear the case brought by Texas to overturn the votes certified by 4 states:Pleased with the SCOTUS ruling, but also immediately slightly terrified of where this crazy train goes next.  We should know by now there’s a bottomless supply of crazy.

        ~ Brendan Buck, former adviser to Speakers of the House Paul Ryan and John Boehner 

 


Re: problems using NVDA with my new laptop

Gene
 

it might help clarify things if we knew the answer to the following question:

When you use numpad commands by themselves, do they work correctly?  In other words, does numpad 8 read the current line of the object you are on?  Does numpad 7 move to the previous line and numpad 9 move to the next line? 


I also did a bit of experimentation and if a current or near current version of NVDA is being used, it doesn't matter, for what we are discussing, if laptop or desktop mode is being used.  it may for other commands, but the numpad review commands such as shift 7, 8, and 9, work in both modes.  Before continuing with any experimentation, do the following to make completely sure you are working in the correct screen-review mode:

Issue the command numpad insert numpad 1 until you hear no previous review mode.  If you changed review modes at some point, you may well have unexpected results.


Gene

On 12/29/2020 6:16 PM, Brian Vogel wrote:
On Tue, Dec 29, 2020 at 06:40 PM, Nevzat Adil wrote:
Since you are using a laptop NVDA should be on laptop keyboard layout.
-
I'm sorry, but that's incorrect and, in actuality, very seldom the case or necessary.  If you have a laptop that has a number pad as part of its built in keyboard NVDA installs using desktop keyboard layout because it can since all the keys are there.

I only have folks use laptop layout if they are already familiar with it and prefer it, or if they have a laptop that does not have a number pad as part of its built in keyboard.  That is the minority of laptops produced today.
--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

[Regarding the Supreme Court refusing to hear the case brought by Texas to overturn the votes certified by 4 states:Pleased with the SCOTUS ruling, but also immediately slightly terrified of where this crazy train goes next.  We should know by now there’s a bottomless supply of crazy.

        ~ Brendan Buck, former adviser to Speakers of the House Paul Ryan and John Boehner 

 

6401 - 6420 of 86439