Date   

Re: accessible email clients with NVDA

 

If anyone is thinking about trying klause mail, yes, it has keyboard commands, but is not accessible with NVDA.


Re: accessible email clients with NVDA

 

On Sun, Jan 22, 2017 at 12:39 am, Brian's Mail list account wrote:
I just don't like Live mail, its too messy and keeps on losing its mail.

While your first assertion is unquestionably correct for you, your second one is just your opinion and the third one has never - I repeat - never - happened in my experience.  I've had a lot of clients who use WLM and have it running alongside Outlook 2010, Thunderbird, and Opera Mail, the last of which is an accessibility nightmare not to mention barely customizable, much like the Windows 10 mail app.
--
Brian

    If you think that you can think about a thing, inextricably attached to something else, without thinking of the thing it is attached to, then you have a legal mind.

        ~ Thomas Reed Powell



Re: Some questions about eSpeak-ng and MBrola

 

hi.
i tried also the method that you mentioned and could not use embrola
voice to try it.
about espeak ng, i downloaded the msi version and could not use it!
i dont know its usage and how to use it!
i installed it and says not valid windows 32!
but i am sure that i downloaded the x86 version.

On 1/22/17, Christo de Klerk <christodeklerk@...> wrote:
Hello all

I have been using MBrola with the old eSpeak for many years and would
like to get it going under eSpeak-ng now I am using NVDA as my screen
reader. I have looked at the eSpeak-ng documentation and I think I have
copied all the necessary MBrola files into their correct places, but I
can't get MBrola activated under NVDA. I select espeak-ng as my
synthesiser, then I go to Voice preferences and I see mb-en1 listed
there, in the list of voices, but it is the usual eSpeak-ng en voice
that keeps talking. How do I get mb-en1 to talk?

Then another question. MBrola tools has this confirmation dialog that
keeps popping up every first time it is run after a reboot. Has anyone
found a way to get that out of the way? It causes havoc, as it pops up
before there is any speech.

I see there is now a Windows installation of eSpeak-ng. Would it upset
the old installation of eSpeak at all if one were to install eSpeak-ng?
I don't want to break anything that ain't broke.

I see the eSpeak-ng documentation is in a .md format. What does one use
to read .md files?

Sorry for all the questions, but I am new to espeak-ng and would like to
get a grip on it. I have worked with the old eSpeak and have done
dictionary development for many years.

Kind regards

Christo




--
we have not sent you but as a mercy to the creation.
holy quran, chapter 21, verse 107.
in the very authentic narration is:
imam hosein is the beacon of light and the ark of salvation.
best website for studying islamic book in different languages
al-islam.org


Re: espeak

Wagner Soares Da Silva
 

It also did not work here on a W7 Ultimate 32 BIT.
I've reported the problem to Reece, developer of Espeak NG.
Who wants to contribute with Espeak NG, just read the note below for
Access the Espeak NG list.

*

Dear ESpeak-NG users, developers, and other beneficiaries,
At the outset, let me sincerely thank Reece for appointing me as a
moderator of this Groups.io based next generation mailing list for
official discussion regarding the ESpeak-NG speech synthesizer. Also,
I would like to express my gratitude towards everyone who joint the
e-mail list via invites sent out on different forums, direct invites,
word-of-mail (not mouth :D) and also for those who have begun
contributing by spreading the word about this project and its
community, and by participating in it.
Following are some fundamental statistics that highlight the current
status of this group:
Member Count: 11
Group Owner: Reece H. Dunn
Group Moderator: Bhavya Shah (Me)
Integrations: Github (https://github.com/espeak-ng/espeak-ng)

Also, following are integral e-mail addresses to perform various
activities on the group:
To Post: espeak-ng@groups.io
To Subscribe: espeak-ng+subscribe@groups.io
To Unsubscribe: espeak-ng+unsubscribe@groups.io
To Contact The Group Owner: espeak-ng+owner@groups.io

At the moment, we have no special hashtags in use (apart from Github),
no dedicated subgroups (due to lack of their requirement) and no Wiki
material (due to their inexistence). However, our vision for this
group must extend beyond not only encompassing this in ESpeak-NG's
next generation e-group, but also having a prolific and proactive
community of users and developers in constant communication and
interaction via this list. ESpeak-NG powers the speech synthesis of
two popular screen readers by default - NVDA for Windows and Orca for
Linux - which in turn fuel computer access for tens of thousands of
visually impaired individuals across the globe. Let us recognize the
significance of this open source project, and accordingly strive to
mobilize its users, developers and other beneficiaries as part of this
e-mail platform.
Please do spread the word about this mailing list and ask your fellow
ESpeak users to join the list by sending a blank mail to
espeak-ng+subscribe@groups.io And send a blank reply to the
confirmation prompt subsequently received.
In conclusion, I hope to dutifully serve as a moderator of this
mailing list in a just manner, and I shall try to the best of my
abilities to assist Reece in ensuring smooth functioning of this
e-group, in constant anticipation of your continued collaboration.

Best Regards,
Bhavya Shah

P.S. Due to Groups.io policies, the first post of every group member
will require approval from a group administrator. All messages from
that e-mail will be delivered directly thereafter.

--
Best Regards
Bhavya Shah

Avid Enthusiast and User of the Free NVDA Screen Reader (www.nvaccess.org)

Contacting Me
E-mail Address: bhavya.shah125@...
Follow me on Twitter @BhavyaShah125 or www.twitter.com/BhavyaShah125
Mobile Number: +91 7506221750


Accessible IRC clients

Sukil Etxenike <sukiletxe@...>
 

Hi,

Does anyone know of an IRC client that is accessible with NVDA and notifies the user of incoming messages on all channels? I know that Thunderbird doesn't do that when the window is focused, and that Instantbird does it but is somewhat cluttered and really old. Also, chatzilla seems to do a good job, but sound doesn't seem to work.

Any corrections / alternatives?

Thanks!

Sukil


Re: accessible email clients with NVDA

 

Because JAWS is the only screen reader that will work with it, silly. NVDA can't get past the adding mail accounts. One can make it work by switching from JAWS TO NVDA, but why bother? They do not care aout accessibility issues, in my opinion.


On 1/22/2017 2:44 AM, Brian's Mail list account wrote:
What has this to do with nvda?
As far as I know  that software you mention is mega messy access wise. I tried it some time ago and the folk making it seemed not to be interested in its issues with screenreaders.
Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message ----- From: "Robert Kingett" <kingettr@...>
To: <nvda@nvda.groups.io>
Sent: Saturday, January 21, 2017 9:24 PM
Subject: Re: [nvda] accessible email clients with NVDA


I managed to add my email account with JAWS and OE classic and noticed that OE classic does not have automatic IMAP support. I disabled POP on my gmail anyway, but OE classic, the most recent one, kept trying to connect to the POP server, so, basically, if anyone is using OE classic and the jaws scripts for it you may need to put IMAP information in later unless I am a ditsy and I am missing something obvious. :)









Some questions about eSpeak-ng and MBrola

Christo de Klerk
 

Hello all

I have been using MBrola with the old eSpeak for many years and would like to get it going under eSpeak-ng now I am using NVDA as my screen reader. I have looked at the eSpeak-ng documentation and I think I have copied all the necessary MBrola files into their correct places, but I can't get MBrola activated under NVDA. I select espeak-ng as my synthesiser, then I go to Voice preferences and I see mb-en1 listed there, in the list of voices, but it is the usual eSpeak-ng en voice that keeps talking. How do I get mb-en1 to talk?

Then another question. MBrola tools has this confirmation dialog that keeps popping up every first time it is run after a reboot. Has anyone found a way to get that out of the way? It causes havoc, as it pops up before there is any speech.

I see there is now a Windows installation of eSpeak-ng. Would it upset the old installation of eSpeak at all if one were to install eSpeak-ng? I don't want to break anything that ain't broke.

I see the eSpeak-ng documentation is in a .md format. What does one use to read .md files?

Sorry for all the questions, but I am new to espeak-ng and would like to get a grip on it. I have worked with the old eSpeak and have done dictionary development for many years.

Kind regards

Christo


Re: outlook express question

Gene
 

I haven't used JAWS or Outlook express for years.  Perhaps JAWS does announce this and I don't recall.  As you say, NVDA doesn't and NVDA isn't user definable in ways that you can change this behavior.  It would require something like a command in a script to cause this behavior.
 
Gene
----- original Message -----

From: Dennis L
Sent: Sunday, January 22, 2017 5:20 AM
Subject: Re: [nvda] outlook express question

Jaws does I wonder if that is a function of the scripts.  It did work when I tried the command a second time.

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Sunday, January 22, 2017 6:02 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] outlook express question

 

I've never seen Outlook Express announce the number of unread messages with any screen-reader just by moving from folder to folder.  I don't know if the status line tells you the information when you stop at a folder or if you need to move to the message list.  that means that I don't know if a screen-reader could be made to announce the information automatically when you move from one folder to the next.

 

Gene

----- Original Message -----

From: Dennis L

Sent: Sunday, January 22, 2017 12:27 AM

Subject: Re: [nvda] outlook express question

 

In other words if I’m on the folder for example

Nvda 2 unread or something like that.

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Sunday, January 22, 2017 1:07 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] outlook express question

 

I've never seen such information spoken when using Outlook Express without reading the status line. 

 

Gene

----- Original Message -----

From: Dennis L

Sent: Saturday, January 21, 2017 11:09 PM

Subject: Re: [nvda] outlook express question

 

You have to be in the folder to get the info is there any way to get the info without being in the folder??

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Sunday, January 22, 2017 12:07 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] outlook express question

 

Use read status line.  You don't have to be in the folders list.  You can be in the message list as I recall.  I haven't used Outlook Express for many years but as I recall, you will hear how many messages are in the list and how many are read and unread.  But if my memory is not quite correct, you will still hear what you want, that is the number of unread messages.  Read status line in NVDA is NVDA key end.  That is for the desktop layout.  I don't know the laptop layout command.

 

Gene

----- Original Message -----

From: Dennis L

Sent: Saturday, January 21, 2017 10:52 PM

Subject: [nvda] outlook express question

 

Hi, when using NVDA if you tab to your folders NVDA doesn’t say NVDA 5 unread messages is there any way to get it to automatically speak this info??


Re: accessible email clients with NVDA

Gene
 

Regarding Outlook Express losing mail, I'm not sure to what extent this happens when saving mail in most folders.  it happens enough to be a real potential problem when people save what I have called ridiculous amounts of mail in the inbox.  I should clarify that that is what I meant, though I have seen a number of people who have had corrupted deleted messages folders over the years.  But what the percentage of users is that has this problem is something I don't know. 
 
Gene
----- Original Message -----

From: Gene
Sent: Sunday, January 22, 2017 5:21 AM
Subject: Re: [nvda] accessible email clients with NVDA

Messy?  Why?  Because you don't like ribbons?  That's your opinion of ribbons, if that is the case and is not a proper factual description of the program.  I don't lose mail in Windows Live Mail except if the program crashes.  I mostly use the old menu version of the program but I do use the new ribbon version when I am on vacation.  That means I haven't used it much but to the extent that I have, something like a total of three weeks, I've only lost messages when the program crashes and because it very seldom does in my case, it seldom loses mail. I've read a little about the program in reviews and I haven't seen this allegation about losing mail elsewhere. 
 
I have seen the crashing problem discussed that I have discussed before.  Without more efvidence, I will assume that your discussion of losing mail is not a serious problem unless the user has the crashing problem.
 
And Outlook Express is notorious for losing mail if people save ridiculous numbers of messages in the program, which many people do.
Gene 
----- Original Message -----
Sent: Sunday, January 22, 2017 2:39 AM
Subject: Re: [nvda] accessible email clients with NVDA

I just don't like Live mail, its too messy and keeps on losing its mail.
 OE is still pretty good. Its probably more secure than one might think in
most circumstances. I'd not run a company with it, and Outlook of course is
only available as part of Office and microsoft cannot leave it alone. Its
far too bloated and tries to do things most just do not need.

Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Brian Vogel" <britechguy@...>
To: <nvda@nvda.groups.io>
Sent: Saturday, January 21, 2017 6:32 PM
Subject: Re: [nvda] accessible email clients with NVDA


On Sat, Jan 21, 2017 at 09:55 am, James AUSTIN wrote:

>
> I find Thunderbird to be very stable.

As do the millions of other users. It's one of the more popular email
clients out there, and accessible, too.

Outlook, at least up through the 2013 version, is also accessible as is
Windows Live Mail 2012, but official support just terminated for the latter.
WLM 2012 should be just fine for a while for POP and IMAP e-mail access
methods. It will certainly hit the tech press when it begins it's transition
to "a block of security Swiss cheese" that Outlook Express became long ago.
--
*Brian*

If you think that you can think about a thing, inextricably attached to
something else, without thinking of the thing it is attached to, then you
have a legal mind.

~ Thomas Reed Powell




Re: outlook express question

Gene
 

I'm quite sure you won't be able to do this. 
 
Gene

----- Original Message -----
From: Dennis L
Sent: Sunday, January 22, 2017 2:48 AM
Subject: Re: [nvda] outlook express question

I don't know about NVDA with jaws it does can you or someone else mess
around and see if you can get it to please?  I'm not very familiar with
NVDA.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Brian's
Mail list account
Sent: Sunday, January 22, 2017 3:47 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] outlook express question

I don't think it ever did, did it?
 I think you can do it with one of the navigation modes.
 Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Dennis L" <dennisl1982@...>
To: <nvda@nvda.groups.io>
Sent: Sunday, January 22, 2017 4:52 AM
Subject: [nvda] outlook express question


> Hi, when using NVDA if you tab to your folders NVDA doesn't say NVDA 5
> unread messages is there any way to get it to automatically speak this
> info??
>
>






Re: outlook express question

Dennis L <dennisl1982@...>
 

Jaws does I wonder if that is a function of the scripts.  It did work when I tried the command a second time.

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Sunday, January 22, 2017 6:02 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] outlook express question

 

I've never seen Outlook Express announce the number of unread messages with any screen-reader just by moving from folder to folder.  I don't know if the status line tells you the information when you stop at a folder or if you need to move to the message list.  that means that I don't know if a screen-reader could be made to announce the information automatically when you move from one folder to the next.

 

Gene

----- Original Message -----

From: Dennis L

Sent: Sunday, January 22, 2017 12:27 AM

Subject: Re: [nvda] outlook express question

 

In other words if I’m on the folder for example

Nvda 2 unread or something like that.

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Sunday, January 22, 2017 1:07 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] outlook express question

 

I've never seen such information spoken when using Outlook Express without reading the status line. 

 

Gene

----- Original Message -----

From: Dennis L

Sent: Saturday, January 21, 2017 11:09 PM

Subject: Re: [nvda] outlook express question

 

You have to be in the folder to get the info is there any way to get the info without being in the folder??

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Sunday, January 22, 2017 12:07 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] outlook express question

 

Use read status line.  You don't have to be in the folders list.  You can be in the message list as I recall.  I haven't used Outlook Express for many years but as I recall, you will hear how many messages are in the list and how many are read and unread.  But if my memory is not quite correct, you will still hear what you want, that is the number of unread messages.  Read status line in NVDA is NVDA key end.  That is for the desktop layout.  I don't know the laptop layout command.

 

Gene

----- Original Message -----

From: Dennis L

Sent: Saturday, January 21, 2017 10:52 PM

Subject: [nvda] outlook express question

 

Hi, when using NVDA if you tab to your folders NVDA doesn’t say NVDA 5 unread messages is there any way to get it to automatically speak this info??


Re: accessible email clients with NVDA

Gene
 

Messy?  Why?  Because you don't like ribbons?  That's your opinion of ribbons, if that is the case and is not a proper factual description of the program.  I don't lose mail in Windows Live Mail except if the program crashes.  I mostly use the old menu version of the program but I do use the new ribbon version when I am on vacation.  That means I haven't used it much but to the extent that I have, something like a total of three weeks, I've only lost messages when the program crashes and because it very seldom does in my case, it seldom loses mail. I've read a little about the program in reviews and I haven't seen this allegation about losing mail elsewhere. 
 
I have seen the crashing problem discussed that I have discussed before.  Without more efvidence, I will assume that your discussion of losing mail is not a serious problem unless the user has the crashing problem.
 
And Outlook Express is notorious for losing mail if people save ridiculous numbers of messages in the program, which many people do.
Gene 

----- Original Message -----
Sent: Sunday, January 22, 2017 2:39 AM
Subject: Re: [nvda] accessible email clients with NVDA

I just don't like Live mail, its too messy and keeps on losing its mail.
 OE is still pretty good. Its probably more secure than one might think in
most circumstances. I'd not run a company with it, and Outlook of course is
only available as part of Office and microsoft cannot leave it alone. Its
far too bloated and tries to do things most just do not need.

Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Brian Vogel" <britechguy@...>
To: <nvda@nvda.groups.io>
Sent: Saturday, January 21, 2017 6:32 PM
Subject: Re: [nvda] accessible email clients with NVDA


On Sat, Jan 21, 2017 at 09:55 am, James AUSTIN wrote:

>
> I find Thunderbird to be very stable.

As do the millions of other users. It's one of the more popular email
clients out there, and accessible, too.

Outlook, at least up through the 2013 version, is also accessible as is
Windows Live Mail 2012, but official support just terminated for the latter.
WLM 2012 should be just fine for a while for POP and IMAP e-mail access
methods. It will certainly hit the tech press when it begins it's transition
to "a block of security Swiss cheese" that Outlook Express became long ago.
--
*Brian*

If you think that you can think about a thing, inextricably attached to
something else, without thinking of the thing it is attached to, then you
have a legal mind.

~ Thomas Reed Powell




Re: there are people who want also outlook express.

Gene
 

I don't know why you say that Live Mail is bug ridden.  I said recently that some people have crashing problems with it but many people don't and use the program without problems. 
 
As far as Outlook Express is concerned, on another list I follow, some people have had problems with it and the problems persisted regardless of what they did to solve them.  I don't recall what they are now but I'm saying that if the program works well for you, fine.  If not, you may not be able to get it to work as it should. 
 
Gene
----- Original Message -----

Sent: Sunday, January 22, 2017 2:32 AM
Subject: Re: [nvda] there are people who want also outlook express.

Its not a crack as such. All it is is a bundle of display routines etc, to
trick a copy of Outlook express into thinking its still on xp when its on 7
or 10. It works fine There are some issues though that also affected it
before, namely if you use the preview pane, it can loose its messages and
need to be restarted. Just like in xp. this was an nvda hooking in bug and
still is one supposes. It would be wrong to alter the program, probably
illegal as well, as it is not public domain though it is so ubiquitous I
doubt anyone  who has  had a computer for a few years does not have it.
 I use it and am happy to donate the money  to get the latest versions of
the trick routines.
 Its nothing that has not been done before and as OE was always given for
free, nobody gets hurt.
 I fear I have to give this warning though. It was originally designed for
windows 7, and although it will work on 10, when a new build of windows
installs it will be broken as Microsoft sees it as an old bit of left over
software and bungs it in the old system folders it keeps for a bit when you
do the update, so you need to make sure you have all things backed up before
you let Windows 10 use its creators update or whatever its going to be
called.

Unfortunately, having looked at the email client on 10, its all a bit basic
and live mail is still bug ridden, Tbird needs a whole lot of learning for
its shortcut keys, so people who want to use a client I think are badly
served by the current bunch of software. All too many assume email is now
only used on smart phones or online interfaces which is not my experience.
 Brian.
PS you get three keys with your donation. So don't hack it to leave the
person who has obviously put a lot of work into this without a small amount
of money, and it is small and he is also very helpful.
 PPs, cannot think of anything else!

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "P. Otter" <pam.otter@...>
To: <nvda@nvda.groups.io>
Sent: Saturday, January 21, 2017 4:41 PM
Subject: [nvda] there are people who want also outlook express.


hello, here i have outlook express 6.17 that is the newest or may i say the
last one with a crack included.
the crack runs automaticaly after installing and after you have selected
your language.
and for dennis, i've send you accedentally the wrong version, it was an
older one.
put it away and use this one.
because other people asking for a version of outlook express i geve it as
public link.
https://drive.google.com/file/d/0B9sGXgJHSn61T01yY0Y2RktOaE0/view?usp=sharing
cheers
paul otter




Re: outlook express question

Gene
 

I've never seen Outlook Express announce the number of unread messages with any screen-reader just by moving from folder to folder.  I don't know if the status line tells you the information when you stop at a folder or if you need to move to the message list.  that means that I don't know if a screen-reader could be made to announce the information automatically when you move from one folder to the next.
 
Gene

----- Original Message -----
From: Dennis L
Sent: Sunday, January 22, 2017 12:27 AM
Subject: Re: [nvda] outlook express question

In other words if I’m on the folder for example

Nvda 2 unread or something like that.

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Sunday, January 22, 2017 1:07 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] outlook express question

 

I've never seen such information spoken when using Outlook Express without reading the status line. 

 

Gene

----- Original Message -----

From: Dennis L

Sent: Saturday, January 21, 2017 11:09 PM

Subject: Re: [nvda] outlook express question

 

You have to be in the folder to get the info is there any way to get the info without being in the folder??

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Sunday, January 22, 2017 12:07 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] outlook express question

 

Use read status line.  You don't have to be in the folders list.  You can be in the message list as I recall.  I haven't used Outlook Express for many years but as I recall, you will hear how many messages are in the list and how many are read and unread.  But if my memory is not quite correct, you will still hear what you want, that is the number of unread messages.  Read status line in NVDA is NVDA key end.  That is for the desktop layout.  I don't know the laptop layout command.

 

Gene

----- Original Message -----

From: Dennis L

Sent: Saturday, January 21, 2017 10:52 PM

Subject: [nvda] outlook express question

 

Hi, when using NVDA if you tab to your folders NVDA doesn’t say NVDA 5 unread messages is there any way to get it to automatically speak this info??


Re: espeak

 

i downloaded the x86 version and installed it.
when i try to open it, nvda says its not a valid windows 32 bit.
whats the problem?
i realy appreciate if someone guide me with the questions which i asked.

On 1/22/17, nasrin khaksar <nasrinkhaksar3@...> wrote:
and also whats the advantages and usage of espeak ng?
if i download it, where can i use it and how?

On 1/22/17, nasrin khaksar <nasrinkhaksar3@...> wrote:
when is the time for releaseing of version 1.49 for sapi5 version of
windows?
its become extremely great if its supports different kind of documents
for converting them into audio and also specially saving them as mp3
beside wave!

On 1/22/17, Brian's Mail list account <bglists@...> wrote:
The improve latency might be the answer here for some sound drivers
perhaps?
Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: ""* Wagner Soares Da Silva *" <wagner.ss123@...>
To: <nvda@nvda.groups.io>
Sent: Sunday, January 22, 2017 7:43 AM
Subject: Re: [nvda] espeak


Hello, I received the content below the Espeak NG list.

Hi all,

I have released eSpeak NG 1.49.1, which is available at
https://github.com/espeak-ng/espeak-ng/releases/tag/1.49.1.

What's New:

* Vim syntax support for rule files.
* Replace ieee80.c with the implementation at
http://www.realitypixels.com/turk/opensource/ToFromIEEE.c.txt (
http://www.realitypixels.com/turk/opensource/ToFromIEEE.c.txt ) for
Debian
open source license


compliance.
* Documentation updates.
* Emscripten support.
* Merged the Android port into the main espeak-ng codebase.
* Extend --compile-phoneme to support specifying the source directory
for
phoneme files.
* Support using any directory as the data home, not just espeak-ng-data
.
* Don't install the default voice: use en as the default voice.

*NOTE:* The merger of the Android code is currently experimental. It is
missing support for recognising Unicode characters.

bug fixes:

* Fix .Lnn rule groups to allow groups above 62.
* Fix reporting the eSpeak NG version in the --version string and
Windows
installer.
* Fix a crash when calling LoadDictionary when using clang.
* Threading fixes and Mac OSX portability for the fifo and event code.
* Fixes for running the spect code on big-endian architectures.
* Fix determining the voice directory when installing the 32-bit Windows
binaries on a 64-bit Windows system.
* Fix a regression with the saved parameter logic.
* Reduce the default buffer length to 60mS to improve latency.
* Don't override buffer length when using espeak-ng for audio.
* Fix detecting doubled consonants when using Unicode characters.
* Fix speaking 1,,2 , etc. in languages that use , as a decimal
separator.

updated languages:

* af (Afrikaans) -- Christo de Klerk
* en (English) -- Valdis Vitolins
* fa (Farsi/Persian) -- Shadyar Khodayari
* it (Italian) -- chrislm
* ky (Krygyz) -- JRMeyer
* lv (Latvian) -- Valdis Vitolins
* tr (Turkish) -- Valdis Vitolins

new languages:

* ar (Arabic) -- Taha Zerrouki
* jp (Japanese) -- Reece Dunn (NOTE: Hiragana and Karakana only.)

Kind regards,
Reece


Grande Abraço, Wagner.

P. S.: VOCÊ ESTÁ RECEBENDO UM E-MAIL DE UMA PESSOA CEGA.
ISTO É INCLUSÃO DIGITAL!
QUANDO ENVIAR UM ARQUIVO GRÁFICO, (POR EXEMPLO, UMA FOTO), DESCREVA-A NO
CORPO DA MENSAGEM.
UMA SOCIEDADE INCLUSIVA É AQUELA QUE RECONHECE, RESPEITA E VALORIZA A
DIVERSIDADE HUMANA.

"Deixe tudo que tiver que fazer para amanhã. Talvez você não precise
mais".

Autor desconhecido.
.

-----Mensagem original-----
De: "nasrin khaksar" <nasrinkhaksar3@...>
Para: nvda@nvda.groups.io
Data: Domingo, 22 de Janeiro de 2017 10:11
Assunto: Re: [nvda] espeak

hi.
does realy espeak ng 1.49 exists?
i heard of it, but i could not find it and i use the eespeak ng which
is bundled with nvda which is 1.48.15 until now.
is it realy possible to download espeak sapi5 version of espeak ng now?
if so, when can i download it to test?
is it stable or not?
does it contain all the voices in espeak ng?

On 1/22/17, "* Wagner Soares Da Silva * <wagner.ss123@...> wrote:
I'm having this bug but it's with version 1.49.1 of Espeak NG that was
Released yesterday, version for Windows.



Grande Abraço, Wagner.

P. S.: VOCÊ ESTÁ RECEBENDO UM E-MAIL DE UMA PESSOA CEGA.
ISTO É INCLUSÃO DIGITAL!
QUANDO ENVIAR UM ARQUIVO GRÁFICO, (POR EXEMPLO, UMA FOTO), DESCREVA-A
NO
CORPO DA MENSAGEM.
UMA SOCIEDADE INCLUSIVA É AQUELA QUE RECONHECE, RESPEITA E VALORIZA A
DIVERSIDADE HUMANA.

"Deixe tudo que tiver que fazer para amanhã. Talvez você não precise
mais".> Autor desconhecido.
.

-----Mensagem original-----
De: "Scott VanDeWalle" <scottvandewalle2@...>
Para: nvda@nvda.groups.io
Data: Sabado, 21 de Janeiro de 2017 23:31
Assunto: [nvda] espeak

Hi all.
I am curious to know if this is a bug.
I hope so, it is frustrating.

I'm using esEpak ng with nvda and windows 10.
I'm also using an asus laptop.
When I start reading in any way, usually, the first part of the letter
will
be uninteligable to me, and sometime even the whole word.
For example, when I press home to go to the top of this message to
proof
read it, instead of hi I heard i.
I checked audio ducking and it is totally turned off.
As you can imagine, this is also very frustrating when typing too even
with
key echo turned on.
Could someone look into it?
If so, thank you so so very much.

Have a nice day.

Scott




--
we have not sent you but as a mercy to the creation.
holy quran, chapter 21, verse 107.
in the very authentic narration is:
imam hosein is the beacon of light and the ark of salvation.
best website for studying islamic book in different languages
al-islam.org









--
we have not sent you but as a mercy to the creation.
holy quran, chapter 21, verse 107.
in the very authentic narration is:
imam hosein is the beacon of light and the ark of salvation.
best website for studying islamic book in different languages
al-islam.org




--
we have not sent you but as a mercy to the creation.
holy quran, chapter 21, verse 107.
in the very authentic narration is:
imam hosein is the beacon of light and the ark of salvation.
best website for studying islamic book in different languages
al-islam.org



--
we have not sent you but as a mercy to the creation.
holy quran, chapter 21, verse 107.
in the very authentic narration is:
imam hosein is the beacon of light and the ark of salvation.
best website for studying islamic book in different languages
al-islam.org


Re: espeak

 

and also whats the advantages and usage of espeak ng?
if i download it, where can i use it and how?

On 1/22/17, nasrin khaksar <nasrinkhaksar3@...> wrote:
when is the time for releaseing of version 1.49 for sapi5 version of
windows?
its become extremely great if its supports different kind of documents
for converting them into audio and also specially saving them as mp3
beside wave!

On 1/22/17, Brian's Mail list account <bglists@...> wrote:
The improve latency might be the answer here for some sound drivers
perhaps?
Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: ""* Wagner Soares Da Silva *" <wagner.ss123@...>
To: <nvda@nvda.groups.io>
Sent: Sunday, January 22, 2017 7:43 AM
Subject: Re: [nvda] espeak


Hello, I received the content below the Espeak NG list.

Hi all,

I have released eSpeak NG 1.49.1, which is available at
https://github.com/espeak-ng/espeak-ng/releases/tag/1.49.1.

What's New:

* Vim syntax support for rule files.
* Replace ieee80.c with the implementation at
http://www.realitypixels.com/turk/opensource/ToFromIEEE.c.txt (
http://www.realitypixels.com/turk/opensource/ToFromIEEE.c.txt ) for
Debian
open source license


compliance.
* Documentation updates.
* Emscripten support.
* Merged the Android port into the main espeak-ng codebase.
* Extend --compile-phoneme to support specifying the source directory for
phoneme files.
* Support using any directory as the data home, not just espeak-ng-data .
* Don't install the default voice: use en as the default voice.

*NOTE:* The merger of the Android code is currently experimental. It is
missing support for recognising Unicode characters.

bug fixes:

* Fix .Lnn rule groups to allow groups above 62.
* Fix reporting the eSpeak NG version in the --version string and Windows
installer.
* Fix a crash when calling LoadDictionary when using clang.
* Threading fixes and Mac OSX portability for the fifo and event code.
* Fixes for running the spect code on big-endian architectures.
* Fix determining the voice directory when installing the 32-bit Windows
binaries on a 64-bit Windows system.
* Fix a regression with the saved parameter logic.
* Reduce the default buffer length to 60mS to improve latency.
* Don't override buffer length when using espeak-ng for audio.
* Fix detecting doubled consonants when using Unicode characters.
* Fix speaking 1,,2 , etc. in languages that use , as a decimal
separator.

updated languages:

* af (Afrikaans) -- Christo de Klerk
* en (English) -- Valdis Vitolins
* fa (Farsi/Persian) -- Shadyar Khodayari
* it (Italian) -- chrislm
* ky (Krygyz) -- JRMeyer
* lv (Latvian) -- Valdis Vitolins
* tr (Turkish) -- Valdis Vitolins

new languages:

* ar (Arabic) -- Taha Zerrouki
* jp (Japanese) -- Reece Dunn (NOTE: Hiragana and Karakana only.)

Kind regards,
Reece


Grande Abraço, Wagner.

P. S.: VOCÊ ESTÁ RECEBENDO UM E-MAIL DE UMA PESSOA CEGA.
ISTO É INCLUSÃO DIGITAL!
QUANDO ENVIAR UM ARQUIVO GRÁFICO, (POR EXEMPLO, UMA FOTO), DESCREVA-A NO
CORPO DA MENSAGEM.
UMA SOCIEDADE INCLUSIVA É AQUELA QUE RECONHECE, RESPEITA E VALORIZA A
DIVERSIDADE HUMANA.

"Deixe tudo que tiver que fazer para amanhã. Talvez você não precise
mais".

Autor desconhecido.
.

-----Mensagem original-----
De: "nasrin khaksar" <nasrinkhaksar3@...>
Para: nvda@nvda.groups.io
Data: Domingo, 22 de Janeiro de 2017 10:11
Assunto: Re: [nvda] espeak

hi.
does realy espeak ng 1.49 exists?
i heard of it, but i could not find it and i use the eespeak ng which
is bundled with nvda which is 1.48.15 until now.
is it realy possible to download espeak sapi5 version of espeak ng now?
if so, when can i download it to test?
is it stable or not?
does it contain all the voices in espeak ng?

On 1/22/17, "* Wagner Soares Da Silva * <wagner.ss123@...> wrote:
I'm having this bug but it's with version 1.49.1 of Espeak NG that was
Released yesterday, version for Windows.



Grande Abraço, Wagner.

P. S.: VOCÊ ESTÁ RECEBENDO UM E-MAIL DE UMA PESSOA CEGA.
ISTO É INCLUSÃO DIGITAL!
QUANDO ENVIAR UM ARQUIVO GRÁFICO, (POR EXEMPLO, UMA FOTO), DESCREVA-A NO
CORPO DA MENSAGEM.
UMA SOCIEDADE INCLUSIVA É AQUELA QUE RECONHECE, RESPEITA E VALORIZA A
DIVERSIDADE HUMANA.

"Deixe tudo que tiver que fazer para amanhã. Talvez você não precise
mais".> Autor desconhecido.
.

-----Mensagem original-----
De: "Scott VanDeWalle" <scottvandewalle2@...>
Para: nvda@nvda.groups.io
Data: Sabado, 21 de Janeiro de 2017 23:31
Assunto: [nvda] espeak

Hi all.
I am curious to know if this is a bug.
I hope so, it is frustrating.

I'm using esEpak ng with nvda and windows 10.
I'm also using an asus laptop.
When I start reading in any way, usually, the first part of the letter
will
be uninteligable to me, and sometime even the whole word.
For example, when I press home to go to the top of this message to proof
read it, instead of hi I heard i.
I checked audio ducking and it is totally turned off.
As you can imagine, this is also very frustrating when typing too even
with
key echo turned on.
Could someone look into it?
If so, thank you so so very much.

Have a nice day.

Scott




--
we have not sent you but as a mercy to the creation.
holy quran, chapter 21, verse 107.
in the very authentic narration is:
imam hosein is the beacon of light and the ark of salvation.
best website for studying islamic book in different languages
al-islam.org









--
we have not sent you but as a mercy to the creation.
holy quran, chapter 21, verse 107.
in the very authentic narration is:
imam hosein is the beacon of light and the ark of salvation.
best website for studying islamic book in different languages
al-islam.org



--
we have not sent you but as a mercy to the creation.
holy quran, chapter 21, verse 107.
in the very authentic narration is:
imam hosein is the beacon of light and the ark of salvation.
best website for studying islamic book in different languages
al-islam.org


Re: nuance vocolizer voice

Gary Metzler <gmtravel@...>
 

Hi Rui,

I just bought vocolizer but I can't log in. I got the e mail with my code. I tried to recover my password but with no luck. Can you please help. Thanks,

-----Original Message-----
From: Rui Fontes
Sent: Saturday, January 21, 2017 7:20 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] nuance vocolizer voice

Hello!

www.vocalizer-nvda.com

Rui Fontes
Tiflotecnia, Lda.


-----Mensagem Original-----
De: Gary Metzler
Data: 21 de janeiro de 2017 20:09
Para: nvda@nvda.groups.io
Assunto: [nvda] nuance vocolizer voice


Hi All,

Where can I get the nuance vocolizer voice? Thanks for any help.Regards,
Gary kn4ox


Re: espeak

 

when is the time for releaseing of version 1.49 for sapi5 version of windows?
its become extremely great if its supports different kind of documents
for converting them into audio and also specially saving them as mp3
beside wave!

On 1/22/17, Brian's Mail list account <bglists@...> wrote:
The improve latency might be the answer here for some sound drivers
perhaps?
Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: ""* Wagner Soares Da Silva *" <wagner.ss123@...>
To: <nvda@nvda.groups.io>
Sent: Sunday, January 22, 2017 7:43 AM
Subject: Re: [nvda] espeak


Hello, I received the content below the Espeak NG list.

Hi all,

I have released eSpeak NG 1.49.1, which is available at
https://github.com/espeak-ng/espeak-ng/releases/tag/1.49.1.

What's New:

* Vim syntax support for rule files.
* Replace ieee80.c with the implementation at
http://www.realitypixels.com/turk/opensource/ToFromIEEE.c.txt (
http://www.realitypixels.com/turk/opensource/ToFromIEEE.c.txt ) for Debian
open source license


compliance.
* Documentation updates.
* Emscripten support.
* Merged the Android port into the main espeak-ng codebase.
* Extend --compile-phoneme to support specifying the source directory for
phoneme files.
* Support using any directory as the data home, not just espeak-ng-data .
* Don't install the default voice: use en as the default voice.

*NOTE:* The merger of the Android code is currently experimental. It is
missing support for recognising Unicode characters.

bug fixes:

* Fix .Lnn rule groups to allow groups above 62.
* Fix reporting the eSpeak NG version in the --version string and Windows
installer.
* Fix a crash when calling LoadDictionary when using clang.
* Threading fixes and Mac OSX portability for the fifo and event code.
* Fixes for running the spect code on big-endian architectures.
* Fix determining the voice directory when installing the 32-bit Windows
binaries on a 64-bit Windows system.
* Fix a regression with the saved parameter logic.
* Reduce the default buffer length to 60mS to improve latency.
* Don't override buffer length when using espeak-ng for audio.
* Fix detecting doubled consonants when using Unicode characters.
* Fix speaking 1,,2 , etc. in languages that use , as a decimal separator.

updated languages:

* af (Afrikaans) -- Christo de Klerk
* en (English) -- Valdis Vitolins
* fa (Farsi/Persian) -- Shadyar Khodayari
* it (Italian) -- chrislm
* ky (Krygyz) -- JRMeyer
* lv (Latvian) -- Valdis Vitolins
* tr (Turkish) -- Valdis Vitolins

new languages:

* ar (Arabic) -- Taha Zerrouki
* jp (Japanese) -- Reece Dunn (NOTE: Hiragana and Karakana only.)

Kind regards,
Reece


Grande Abraço, Wagner.

P. S.: VOCÊ ESTÁ RECEBENDO UM E-MAIL DE UMA PESSOA CEGA.
ISTO É INCLUSÃO DIGITAL!
QUANDO ENVIAR UM ARQUIVO GRÁFICO, (POR EXEMPLO, UMA FOTO), DESCREVA-A NO
CORPO DA MENSAGEM.
UMA SOCIEDADE INCLUSIVA É AQUELA QUE RECONHECE, RESPEITA E VALORIZA A
DIVERSIDADE HUMANA.

"Deixe tudo que tiver que fazer para amanhã. Talvez você não precise mais".

Autor desconhecido.
.

-----Mensagem original-----
De: "nasrin khaksar" <nasrinkhaksar3@...>
Para: nvda@nvda.groups.io
Data: Domingo, 22 de Janeiro de 2017 10:11
Assunto: Re: [nvda] espeak

hi.
does realy espeak ng 1.49 exists?
i heard of it, but i could not find it and i use the eespeak ng which
is bundled with nvda which is 1.48.15 until now.
is it realy possible to download espeak sapi5 version of espeak ng now?
if so, when can i download it to test?
is it stable or not?
does it contain all the voices in espeak ng?

On 1/22/17, "* Wagner Soares Da Silva * <wagner.ss123@...> wrote:
I'm having this bug but it's with version 1.49.1 of Espeak NG that was
Released yesterday, version for Windows.



Grande Abraço, Wagner.

P. S.: VOCÊ ESTÁ RECEBENDO UM E-MAIL DE UMA PESSOA CEGA.
ISTO É INCLUSÃO DIGITAL!
QUANDO ENVIAR UM ARQUIVO GRÁFICO, (POR EXEMPLO, UMA FOTO), DESCREVA-A NO
CORPO DA MENSAGEM.
UMA SOCIEDADE INCLUSIVA É AQUELA QUE RECONHECE, RESPEITA E VALORIZA A
DIVERSIDADE HUMANA.

"Deixe tudo que tiver que fazer para amanhã. Talvez você não precise
mais".> Autor desconhecido.
.

-----Mensagem original-----
De: "Scott VanDeWalle" <scottvandewalle2@...>
Para: nvda@nvda.groups.io
Data: Sabado, 21 de Janeiro de 2017 23:31
Assunto: [nvda] espeak

Hi all.
I am curious to know if this is a bug.
I hope so, it is frustrating.

I'm using esEpak ng with nvda and windows 10.
I'm also using an asus laptop.
When I start reading in any way, usually, the first part of the letter
will
be uninteligable to me, and sometime even the whole word.
For example, when I press home to go to the top of this message to proof
read it, instead of hi I heard i.
I checked audio ducking and it is totally turned off.
As you can imagine, this is also very frustrating when typing too even
with
key echo turned on.
Could someone look into it?
If so, thank you so so very much.

Have a nice day.

Scott




--
we have not sent you but as a mercy to the creation.
holy quran, chapter 21, verse 107.
in the very authentic narration is:
imam hosein is the beacon of light and the ark of salvation.
best website for studying islamic book in different languages
al-islam.org








--
we have not sent you but as a mercy to the creation.
holy quran, chapter 21, verse 107.
in the very authentic narration is:
imam hosein is the beacon of light and the ark of salvation.
best website for studying islamic book in different languages
al-islam.org


Re: Remote question

 

Thanks for your reply. Will try and give featback
---------------
Dang Manh Cuong
The Assistive technology specialist
Sao Mai Vocational and assistive center for the blind
391 Lac Long Quan, ward 5, Dst 11, HCMC, Vietnam
Tel: +84862573309
E-mail: vanphong@...; congnghe@...
Facebook: https://www.facebook.com/SaoMaiCenter
Website: http://www.trungtamsaomai.org; http://www.saomaicenter.org

Mobile / Zalo: +84 902-572-300
E-mail: @cuongdang; cuong@...
Yahoo! ID: manhcuong0312
Skype name: dangmanhcuong
facebook: http://facebook.com/dangmanhcuong
Twitter: @ManhCuongTech

----- Original Message -----
From: "Tyler Spivey" <tspivey@...>
To: <nvda@nvda.groups.io>
Sent: Friday, January 20, 2017 11:39 PM
Subject: Re: [nvda] Remote question


On the machine being controlled, go to the NVDA menu, Preferences, Keyboard settings, then check Handle keys from other applications.
On 1/20/2017 6:23 AM, Dang Manh Cuong wrote:
To all listers
I use NVDA remote to connect to my friend's computer, but when
connected, I can't use nvda commands for controling his computer. Please
help me how to fix it. Using NvDA remote 1.2, and the latest version of
NVDA.
Any help would be appreciated.
Cuong
---------------
Dang Manh Cuong
The Assistive technology specialist
Sao Mai Vocational and assistive center for the blind
391 Lac Long Quan, ward 5, Dst 11, HCMC, Vietnam
Tel: +84862573309
E-mail: vanphong@...
<mailto:vanphong@...>; congnghe@...
<mailto:congnghe@...>
Facebook: https://www.facebook.com/SaoMaiCenter
Website: http://www.trungtamsaomai.org; http://www.saomaicenter.org

Mobile / Zalo: +84 902-572-300
E-mail: @cuongdang <mailto:@cuongdang>;
cuong@... <mailto:cuong@...>
Yahoo! ID: manhcuong0312
Skype name: dangmanhcuong
facebook: http://facebook.com/dangmanhcuong
Twitter: @ManhCuongTech


Re: espeak

Brian's Mail list account <bglists@...>
 

The improve latency might be the answer here for some sound drivers perhaps?
Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: ""* Wagner Soares Da Silva *" <wagner.ss123@...>
To: <nvda@nvda.groups.io>
Sent: Sunday, January 22, 2017 7:43 AM
Subject: Re: [nvda] espeak


Hello, I received the content below the Espeak NG list.

Hi all,

I have released eSpeak NG 1.49.1, which is available at https://github.com/espeak-ng/espeak-ng/releases/tag/1.49.1.

What's New:

* Vim syntax support for rule files.
* Replace ieee80.c with the implementation at http://www.realitypixels.com/turk/opensource/ToFromIEEE.c.txt ( http://www.realitypixels.com/turk/opensource/ToFromIEEE.c.txt ) for Debian open source license


compliance.
* Documentation updates.
* Emscripten support.
* Merged the Android port into the main espeak-ng codebase.
* Extend --compile-phoneme to support specifying the source directory for phoneme files.
* Support using any directory as the data home, not just espeak-ng-data .
* Don't install the default voice: use en as the default voice.

*NOTE:* The merger of the Android code is currently experimental. It is
missing support for recognising Unicode characters.

bug fixes:

* Fix .Lnn rule groups to allow groups above 62.
* Fix reporting the eSpeak NG version in the --version string and Windows installer.
* Fix a crash when calling LoadDictionary when using clang.
* Threading fixes and Mac OSX portability for the fifo and event code.
* Fixes for running the spect code on big-endian architectures.
* Fix determining the voice directory when installing the 32-bit Windows binaries on a 64-bit Windows system.
* Fix a regression with the saved parameter logic.
* Reduce the default buffer length to 60mS to improve latency.
* Don't override buffer length when using espeak-ng for audio.
* Fix detecting doubled consonants when using Unicode characters.
* Fix speaking 1,,2 , etc. in languages that use , as a decimal separator.

updated languages:

* af (Afrikaans) -- Christo de Klerk
* en (English) -- Valdis Vitolins
* fa (Farsi/Persian) -- Shadyar Khodayari
* it (Italian) -- chrislm
* ky (Krygyz) -- JRMeyer
* lv (Latvian) -- Valdis Vitolins
* tr (Turkish) -- Valdis Vitolins

new languages:

* ar (Arabic) -- Taha Zerrouki
* jp (Japanese) -- Reece Dunn (NOTE: Hiragana and Karakana only.)

Kind regards,
Reece


Grande Abraço, Wagner.

P. S.: VOCÊ ESTÁ RECEBENDO UM E-MAIL DE UMA PESSOA CEGA.
ISTO É INCLUSÃO DIGITAL!
QUANDO ENVIAR UM ARQUIVO GRÁFICO, (POR EXEMPLO, UMA FOTO), DESCREVA-A NO CORPO DA MENSAGEM.
UMA SOCIEDADE INCLUSIVA É AQUELA QUE RECONHECE, RESPEITA E VALORIZA A DIVERSIDADE HUMANA.

"Deixe tudo que tiver que fazer para amanhã. Talvez você não precise mais". Autor desconhecido.
.

-----Mensagem original-----
De: "nasrin khaksar" <nasrinkhaksar3@...>
Para: nvda@nvda.groups.io
Data: Domingo, 22 de Janeiro de 2017 10:11
Assunto: Re: [nvda] espeak

hi.
does realy espeak ng 1.49 exists?
i heard of it, but i could not find it and i use the eespeak ng which
is bundled with nvda which is 1.48.15 until now.
is it realy possible to download espeak sapi5 version of espeak ng now?
if so, when can i download it to test?
is it stable or not?
does it contain all the voices in espeak ng?

On 1/22/17, "* Wagner Soares Da Silva * <wagner.ss123@...> wrote:
I'm having this bug but it's with version 1.49.1 of Espeak NG that was
Released yesterday, version for Windows.



Grande Abraço, Wagner.

P. S.: VOCÊ ESTÁ RECEBENDO UM E-MAIL DE UMA PESSOA CEGA.
ISTO É INCLUSÃO DIGITAL!
QUANDO ENVIAR UM ARQUIVO GRÁFICO, (POR EXEMPLO, UMA FOTO), DESCREVA-A NO
CORPO DA MENSAGEM.
UMA SOCIEDADE INCLUSIVA É AQUELA QUE RECONHECE, RESPEITA E VALORIZA A
DIVERSIDADE HUMANA.

"Deixe tudo que tiver que fazer para amanhã. Talvez você não precise mais".> Autor desconhecido.
.

-----Mensagem original-----
De: "Scott VanDeWalle" <scottvandewalle2@...>
Para: nvda@nvda.groups.io
Data: Sabado, 21 de Janeiro de 2017 23:31
Assunto: [nvda] espeak

Hi all.
I am curious to know if this is a bug.
I hope so, it is frustrating.

I'm using esEpak ng with nvda and windows 10.
I'm also using an asus laptop.
When I start reading in any way, usually, the first part of the letter will
be uninteligable to me, and sometime even the whole word.
For example, when I press home to go to the top of this message to proof
read it, instead of hi I heard i.
I checked audio ducking and it is totally turned off.
As you can imagine, this is also very frustrating when typing too even with
key echo turned on.
Could someone look into it?
If so, thank you so so very much.

Have a nice day.

Scott




--
we have not sent you but as a mercy to the creation.
holy quran, chapter 21, verse 107.
in the very authentic narration is:
imam hosein is the beacon of light and the ark of salvation.
best website for studying islamic book in different languages
al-islam.org