Date   

NVDA and outlook questions

Dennis L <dennisl1982@...>
 

Hi, I was wondering is there a way to get NVDA to automatically read the suggestions that come up when you are typing the address or persons name who the message is to?


Re: two questions regarding nvda

Rui Fontes
 

Gene, Louis is right if you use Windows 10 and have activated this feature.


Rui Fontes


Às 21:29 de 28/12/2020, Gene escreveu:

Every time you use control c, the previous item on the clipboard is removed and replaced by the new one.  You can't copy multiple items to the clipboard as you describe.

I'll look at the what's new section in the NVDA beta to see if this ability has been added.  At this time, I don't remember if you need an NVDA add-on to do this or if the ability has been added to the screen-reader.

Gene
-----Original Message----- From: Louis Maher
Sent: Monday, December 28, 2020 3:21 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] two questions regarding nvda



Hello Mike,



Regarding the clipboard:



Windows commands handle this situation.

If you want to put three things on the clipboard, select the first item, hit control + c.  Go to the second item, select it, and hit control + c.  Again select the third item and hit control + c.



Now go to where you want to paste item 1, hit windows + v.  This will give you a list of the things you have copied to the clipboard.  Arrow up and down the list until you find item one. Hit enter.



Again move to the second and third spots, Up and down arrow to you find items 2 and 3, and hit enter for each.

hit windows + v, then enter.









Regards

Louis Maher

Phone: 713-444-7838

E-mail ljmaher03@outlook.com







From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of mike mcglashon
Sent: Monday, December 28, 2020 2:48 PM
To: nvda@nvda.groups.io
Subject: [nvda] two questions regarding nvda





Hi guys:



I have two questions regarding nvda:

First,

Is there a “append to clipboard” command in nvda the way there is in jaws, “insert+windows+c” command?



Second,

I see that when I am in word, and I encounter a table, nvda does not say “entering table” or “exiting table” like jaws does;

Is there a way to turn this on?

(by the way, this also happens within webpages as well).



Please advise as you like.



Mike M.



Mike mcglashon

Email: Michael.mcglashon@comcast.net

Ph: 618 783 9331













Re: two questions regarding nvda

Gene
 

To add text to the clipboard, you need an add-on. it is Clip Contents Designer. You can get it here:
https://addons.nvda-project.org/addons/clipContentsDesigner.en.html

Gene

-----Original Message-----
From: Gene via groups.io
Sent: Monday, December 28, 2020 3:29 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] two questions regarding nvda

Every time you use control c, the previous item on the clipboard is removed
and replaced by the new one. You can't copy multiple items to the clipboard
as you describe.

I'll look at the what's new section in the NVDA beta to see if this ability
has been added. At this time, I don't remember if you need an NVDA add-on
to do this or if the ability has been added to the screen-reader.

Gene
-----Original Message-----
From: Louis Maher
Sent: Monday, December 28, 2020 3:21 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] two questions regarding nvda



Hello Mike,



Regarding the clipboard:



Windows commands handle this situation.

If you want to put three things on the clipboard, select the first item, hit
control + c. Go to the second item, select it, and hit control + c. Again
select the third item and hit control + c.



Now go to where you want to paste item 1, hit windows + v. This will give
you a list of the things you have copied to the clipboard. Arrow up and
down the list until you find item one. Hit enter.



Again move to the second and third spots, Up and down arrow to you find
items 2 and 3, and hit enter for each.

hit windows + v, then enter.









Regards

Louis Maher

Phone: 713-444-7838

E-mail ljmaher03@outlook.com







From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of mike mcglashon
Sent: Monday, December 28, 2020 2:48 PM
To: nvda@nvda.groups.io
Subject: [nvda] two questions regarding nvda





Hi guys:



I have two questions regarding nvda:

First,

Is there a “append to clipboard” command in nvda the way there is in jaws,
“insert+windows+c” command?



Second,

I see that when I am in word, and I encounter a table, nvda does not say
“entering table” or “exiting table” like jaws does;

Is there a way to turn this on?

(by the way, this also happens within webpages as well).



Please advise as you like.



Mike M.



Mike mcglashon

Email: Michael.mcglashon@comcast.net

Ph: 618 783 9331


Re: two questions regarding nvda

Gene
 

Every time you use control c, the previous item on the clipboard is removed and replaced by the new one. You can't copy multiple items to the clipboard as you describe.

I'll look at the what's new section in the NVDA beta to see if this ability has been added. At this time, I don't remember if you need an NVDA add-on to do this or if the ability has been added to the screen-reader.

Gene

-----Original Message-----
From: Louis Maher
Sent: Monday, December 28, 2020 3:21 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] two questions regarding nvda



Hello Mike,



Regarding the clipboard:



Windows commands handle this situation.

If you want to put three things on the clipboard, select the first item, hit control + c. Go to the second item, select it, and hit control + c. Again select the third item and hit control + c.



Now go to where you want to paste item 1, hit windows + v. This will give you a list of the things you have copied to the clipboard. Arrow up and down the list until you find item one. Hit enter.



Again move to the second and third spots, Up and down arrow to you find items 2 and 3, and hit enter for each.

hit windows + v, then enter.









Regards

Louis Maher

Phone: 713-444-7838

E-mail ljmaher03@outlook.com







From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of mike mcglashon
Sent: Monday, December 28, 2020 2:48 PM
To: nvda@nvda.groups.io
Subject: [nvda] two questions regarding nvda





Hi guys:



I have two questions regarding nvda:

First,

Is there a “append to clipboard” command in nvda the way there is in jaws, “insert+windows+c” command?



Second,

I see that when I am in word, and I encounter a table, nvda does not say “entering table” or “exiting table” like jaws does;

Is there a way to turn this on?

(by the way, this also happens within webpages as well).



Please advise as you like.



Mike M.



Mike mcglashon

Email: Michael.mcglashon@comcast.net

Ph: 618 783 9331


Re: two questions regarding nvda

Louis Maher
 

Hello Mike,

 

Regarding the clipboard:

 

Windows commands handle this situation. 

If you want to put three things on the clipboard, select the first item, hit control + c.  Go to the second item, select it, and hit control + c.  Again select the third item and hit control + c.

 

Now go to where you want to paste item 1, hit windows + v.  This will give you a list of the things you have copied to the clipboard.  Arrow up and down the list until you find item one.  Hit enter.

 

Again move to the second and third spots, Up and down arrow to you find items 2 and 3, and hit enter for each.

hit windows + v, then enter.

 

 

 

Regards

Louis Maher

Phone: 713-444-7838

E-mail ljmaher03@...

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of mike mcglashon
Sent: Monday, December 28, 2020 2:48 PM
To: nvda@nvda.groups.io
Subject: [nvda] two questions regarding nvda

 

Hi guys:

 

I have two questions regarding nvda:

First,

Is there a “append to clipboard” command in nvda the way there is in jaws, “insert+windows+c” command?

 

Second,

I see that when I am in word, and I encounter a table, nvda does not say “entering table” or “exiting table” like jaws does;

Is there a way to turn this on?

(by the way, this also happens within webpages as well).

 

Please advise as you like.

 

Mike M.

 

Mike mcglashon

Email: Michael.mcglashon@...

Ph: 618 783 9331

 


two questions regarding nvda

mike mcglashon
 

Hi guys:

 

I have two questions regarding nvda:

First,

Is there a “append to clipboard” command in nvda the way there is in jaws, “insert+windows+c” command?

 

Second,

I see that when I am in word, and I encounter a table, nvda does not say “entering table” or “exiting table” like jaws does;

Is there a way to turn this on?

(by the way, this also happens within webpages as well).

 

Please advise as you like.

 

Mike M.

 

Mike mcglashon

Email: Michael.mcglashon@...

Ph: 618 783 9331

 


Re: How to turn off NVDA

Chris Mullins
 

Hi

After pressing Insert+q, ensure the combo box in the Exit NVDA dialog is set to “Exit” and not to one of the restart options before yu press the OK button.

 

Cheers

Chris

 

From: Food Posse
Sent: 28 December 2020 18:23
To: nvda@nvda.groups.io
Subject: [nvda] How to turn off NVDA

 

Can anyone help to fully turn off NVDA?

 

We are trying to set up a new computer for a friend and installed NVDA.

We are not familiar with screen readers so we launched NVDA to test it

for her.  Then we tried to quit NVDA with insert + Q then OK, but NVDA

continued to run. No matter what we tried to quit, NVDA continued to

run. We finally went to the task manager to end task to stop NVDA. But

then NVDA automatically came back on whenever we installed or launched a

new program. We tried searching online for help but the Insert + Q or

Exit was the only option offered. But that option does not work for us.

 

When we turned Narrator on and off, it stayed off until we selected to

activate it.  Is there a similar setting or way to turn off NVDA and for

it to stay off until we select to turn it on?  Thank you for any help

the group can offer.

 

 

 

 

 

 


DVD ripper that works with NVDA?

George McCoy
 

I have some dvd .iso files that I need to rip.


Thanks,

George


Re: How to turn off NVDA

Sarah k Alawami
 

Correct. I have the run time set to start up when the log on screen appearas, so the behavior actually makes sense.

--

Sarah Alawami, owner of TFFP. . For more info go to our website.

Check out my adventures with a shadow machine.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on twitch. Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page You will also be able to buy some of my products and eBooks there.

Finally, to become a patron and help support the podcast go here

On 28 Dec 2020, at 12:05, Gene wrote:

I suspect the reason NVDA automatically comes on when set to run at the login screen when the secure desktop comes up may be that NVDA loads another version of itself to run when the secure desktop opens. My guess is that there is a relation between this and the setting to automatically run at the login screen. Perhaps one of the developers will discuss the matter.

Gene
-----Original Message----- From: Brian Vogel
Sent: Monday, December 28, 2020 2:00 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] How to turn off NVDA

On Mon, Dec 28, 2020 at 02:21 PM, Bob Cavanaugh wrote:
Actually, this isn't always the case. If the option to use NVDA on the
log-on screen is checked, it annoyingly pops up on every screen that
requires administrative action, and stays there until you shut it off.-
This is news to me, and good information to have. Most of the folks I've worked with who are using NVDA have their systems set up to log them straight in to their desktops on system (re)start, so they're not using that setting.

Several don't even have any screen reader turn on initially by default, as they will choose one based on what it is they're about to work with first if one screen reader works with that software better than the other.

Other than what you document above, which I've never seen because that setting was not set, I have not encountered NVDA doing a self-restart once explicitly exited from.

There are a number of possibilities here, but if the situation you described is known to not have been set up, I still strongly recommend an uninstall and reinstall to see if that clears things up, and paying particular attention to the dialogs when installing so the way you want NVDA to behave is actually set up correctly.

--


Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042

[Regarding the Supreme Court refusing to hear the case brought by Texas to overturn the votes certified by 4 states:] Pleased with the SCOTUS ruling, but also immediately slightly terrified of where this crazy train goes next. We should know by now there’s a bottomless supply of crazy.

~ Brendan Buck, former adviser to Speakers of the House Paul Ryan and John Boehner








Re: How to turn off NVDA

Gene
 

I suspect the reason NVDA automatically comes on when set to run at the login screen when the secure desktop comes up may be that NVDA loads another version of itself to run when the secure desktop opens. My guess is that there is a relation between this and the setting to automatically run at the login screen. Perhaps one of the developers will discuss the matter.

Gene

-----Original Message-----
From: Brian Vogel
Sent: Monday, December 28, 2020 2:00 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] How to turn off NVDA

On Mon, Dec 28, 2020 at 02:21 PM, Bob Cavanaugh wrote:
Actually, this isn't always the case. If the option to use NVDA on the
log-on screen is checked, it annoyingly pops up on every screen that
requires administrative action, and stays there until you shut it off.-
This is news to me, and good information to have. Most of the folks I've worked with who are using NVDA have their systems set up to log them straight in to their desktops on system (re)start, so they're not using that setting.

Several don't even have any screen reader turn on initially by default, as they will choose one based on what it is they're about to work with first if one screen reader works with that software better than the other.

Other than what you document above, which I've never seen because that setting was not set, I have not encountered NVDA doing a self-restart once explicitly exited from.

There are a number of possibilities here, but if the situation you described is known to not have been set up, I still strongly recommend an uninstall and reinstall to see if that clears things up, and paying particular attention to the dialogs when installing so the way you want NVDA to behave is actually set up correctly.

--


Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042

[Regarding the Supreme Court refusing to hear the case brought by Texas to overturn the votes certified by 4 states:] Pleased with the SCOTUS ruling, but also immediately slightly terrified of where this crazy train goes next. We should know by now there’s a bottomless supply of crazy.

~ Brendan Buck, former adviser to Speakers of the House Paul Ryan and John Boehner


Re: How to turn off NVDA

 

On Mon, Dec 28, 2020 at 02:21 PM, Bob Cavanaugh wrote:
Actually, this isn't always the case. If the option to use NVDA on the
log-on screen is checked, it annoyingly pops up on every screen that
requires administrative action, and stays there until you shut it off.
-
This is news to me, and good information to have.  Most of the folks I've worked with who are using NVDA have their systems set up to log them straight in to their desktops on system (re)start, so they're not using that setting.

Several don't even have any screen reader turn on initially by default, as they will choose one based on what it is they're about to work with first if one screen reader works with that software better than the other.

Other than what you document above, which I've never seen because that setting was not set, I have not encountered NVDA doing a self-restart once explicitly exited from.

There are a number of possibilities here, but if the situation you described is known to not have been set up, I still strongly recommend an uninstall and reinstall to see if that clears things up, and paying particular attention to the dialogs when installing so the way you want NVDA to behave is actually set up correctly.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

[Regarding the Supreme Court refusing to hear the case brought by Texas to overturn the votes certified by 4 states:Pleased with the SCOTUS ruling, but also immediately slightly terrified of where this crazy train goes next.  We should know by now there’s a bottomless supply of crazy.

        ~ Brendan Buck, former adviser to Speakers of the House Paul Ryan and John Boehner 

 


Re: How to turn off NVDA

Gene
 

Quit is the default option. You don't have to select anything.

Gene

-----Original Message-----
From: Bob Cavanaugh
Sent: Monday, December 28, 2020 1:21 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] How to turn off NVDA

Actually, this isn't always the case. If the option to use NVDA on the
log-on screen is checked, it annoyingly pops up on every screen that
requires administrative action, and stays there until you shut it off.
In my message about System Access, this is another situation where I
would run into problems, as I'd typically be running System Access
when I needed to perform some kind of administrative task, and NVDA
would pop up and get in the way. As for insert+Q not working, is the
quit option selected when you click okay? That dialog has several
options, the others of which escape me at the moment as I turn that
off after I install NVDA.

On 12/28/20, Brian Vogel <britechguy@gmail.com> wrote:
NVDA should not, ever, "self-restart" after having been manually turned off
by the end user. The fact that it is doing so suggests that something went
wrong with the install of the program. I would uninstall it, restart the
machine, then reinstall it to see if the behavior goes away.

The only time it should auto-start is if you were to choose the option to
"Start with Windows" while installing, and even then, if you use NVDA+Q
(INS+Q in the desktop keyboard layout) to exit NVDA it should not
self-restart afterward.

--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042

[ Regarding the Supreme Court refusing to hear the case brought by Texas to
overturn the votes certified by 4 states: ] Pleased with the SCOTUS ruling,
but also immediately slightly terrified of where this crazy train goes
next. We should know by now there’s a bottomless supply of crazy.

~ Brendan Buck, former adviser to Speakers of the House Paul Ryan and John
Boehner






Re: How to turn off NVDA

Bob Cavanaugh <cavbob1993@...>
 

Actually, this isn't always the case. If the option to use NVDA on the
log-on screen is checked, it annoyingly pops up on every screen that
requires administrative action, and stays there until you shut it off.
In my message about System Access, this is another situation where I
would run into problems, as I'd typically be running System Access
when I needed to perform some kind of administrative task, and NVDA
would pop up and get in the way. As for insert+Q not working, is the
quit option selected when you click okay? That dialog has several
options, the others of which escape me at the moment as I turn that
off after I install NVDA.

On 12/28/20, Brian Vogel <britechguy@gmail.com> wrote:
NVDA should not, ever, "self-restart" after having been manually turned off
by the end user. The fact that it is doing so suggests that something went
wrong with the install of the program. I would uninstall it, restart the
machine, then reinstall it to see if the behavior goes away.

The only time it should auto-start is if you were to choose the option to
"Start with Windows" while installing, and even then, if you use NVDA+Q
(INS+Q in the desktop keyboard layout) to exit NVDA it should not
self-restart afterward.

--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042

[ Regarding the Supreme Court refusing to hear the case brought by Texas to
overturn the votes certified by 4 states: ] Pleased with the SCOTUS ruling,
but also immediately slightly terrified of where this crazy train goes
next. We should know by now there’s a bottomless supply of crazy.

~ Brendan Buck, former adviser to Speakers of the House Paul Ryan and John
Boehner






Re: How to turn off NVDA

Gene
 

The insert key is checked by default. also, the initial message indicates that the dialog opens and they use it to try to close the program. NVDA is either not shutting down correctlyy or not at all.

I suspect that what is happening is that it is crashing instead of shutting down and if it crashes, it might restart because it is designed to automatically restart after a crash.

Attempting a reinstallation may correct the problem but if it doesn't, the task manager can be used to close the program and do no harm to it.

Gene

-----Original Message-----
From: Chris via groups.io
Sent: Monday, December 28, 2020 12:50 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] How to turn off NVDA



I suspect that the option to start nvda after signin is checked

Go to nvda preferences > settings > general and uncheck the option to start nvda after signin



also make sure that the insert key has been checked to use as a modifier key

under keyboard options for nvda





From: Food Posse
Sent: 28 December 2020 18:23
To: nvda@nvda.groups.io
Subject: [nvda] How to turn off NVDA





Can anyone help to fully turn off NVDA?



We are trying to set up a new computer for a friend and installed NVDA.

We are not familiar with screen readers so we launched NVDA to test it

for her. Then we tried to quit NVDA with insert + Q then OK, but NVDA

continued to run. No matter what we tried to quit, NVDA continued to

run. We finally went to the task manager to end task to stop NVDA. But

then NVDA automatically came back on whenever we installed or launched a

new program. We tried searching online for help but the Insert + Q or

Exit was the only option offered. But that option does not work for us.



When we turned Narrator on and off, it stayed off until we selected to

activate it. Is there a similar setting or way to turn off NVDA and for

it to stay off until we select to turn it on? Thank you for any help

the group can offer.


Re: How to turn off NVDA

Chris
 

I suspect that the option to start nvda after signin is checked

Go to nvda preferences > settings > general and uncheck the option to start nvda after signin

 

also make sure that the insert key has been checked to use as a modifier key

under keyboard options for nvda

 

From: Food Posse
Sent: 28 December 2020 18:23
To: nvda@nvda.groups.io
Subject: [nvda] How to turn off NVDA

 

Can anyone help to fully turn off NVDA?

 

We are trying to set up a new computer for a friend and installed NVDA.

We are not familiar with screen readers so we launched NVDA to test it

for her.  Then we tried to quit NVDA with insert + Q then OK, but NVDA

continued to run. No matter what we tried to quit, NVDA continued to

run. We finally went to the task manager to end task to stop NVDA. But

then NVDA automatically came back on whenever we installed or launched a

new program. We tried searching online for help but the Insert + Q or

Exit was the only option offered. But that option does not work for us.

 

When we turned Narrator on and off, it stayed off until we selected to

activate it.  Is there a similar setting or way to turn off NVDA and for

it to stay off until we select to turn it on?  Thank you for any help

the group can offer.

 

 

 

 

 

 


Re: How to turn off NVDA

 

NVDA should not, ever, "self-restart" after having been manually turned off by the end user.  The fact that it is doing so suggests that something went wrong with the install of the program.  I would uninstall it, restart the machine, then reinstall it to see if the behavior goes away.

The only time it should auto-start is if you were to choose the option to "Start with Windows" while installing, and even then, if you use NVDA+Q (INS+Q in the desktop keyboard layout) to exit NVDA it should not self-restart afterward.

--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

[Regarding the Supreme Court refusing to hear the case brought by Texas to overturn the votes certified by 4 states:Pleased with the SCOTUS ruling, but also immediately slightly terrified of where this crazy train goes next.  We should know by now there’s a bottomless supply of crazy.

        ~ Brendan Buck, former adviser to Speakers of the House Paul Ryan and John Boehner 

 


How to turn off NVDA

Food Posse <allaboutfoodandfun@...>
 

Can anyone help to fully turn off NVDA?

We are trying to set up a new computer for a friend and installed NVDA. We are not familiar with screen readers so we launched NVDA to test it for her.  Then we tried to quit NVDA with insert + Q then OK, but NVDA continued to run. No matter what we tried to quit, NVDA continued to run. We finally went to the task manager to end task to stop NVDA. But then NVDA automatically came back on whenever we installed or launched a new program. We tried searching online for help but the Insert + Q or Exit was the only option offered. But that option does not work for us.

When we turned Narrator on and off, it stayed off until we selected to activate it.  Is there a similar setting or way to turn off NVDA and for it to stay off until we select to turn it on?  Thank you for any help the group can offer.


Re: NVDA remote access via an android app, narwhal

Suhas Dharwad
 

Hi,

Interesting app
I’ll surely give this a try.

Thanks.


Suhas
Sent from Thunderbird

“Things can turn out differently, Apollo.
That's the nice thing about being human.
We only have one life, but we can choose what kind of story it's going to be.”
Rick Riordan

On 12/28/2020 17:04, Jacob Kruger wrote:

Hope this isn't OT, but, not sure if many users are aware of an android app called narwhal, which allows you remote access to a PC with both NVDA and the NVDARemote add-on installed:

https://nvdaremote.com/


The app on the playstore is here:

https://play.google.com/store/apps/details?id=im.vortex.narwall


Either way, since I have an additional machine here that am working with besides my primary development machine, I had installed both the same version of NVDA on it, along with the add-on, and, configured it to automatically set itself as a remote control target on startup, since don't want to have to switch between their two keyboards too often, and, thought would give this android software a try as well, for the first time.


I hooked up a full USB keyboard to my android handset via an OTG adapter, and, honestly, it worked pretty well overall, with the only issue being that it seemed to keep the numlock key locked, so had to work with either caps-lock or the additional insert key above the cursor arrow keys as NVDA key, and, couldn't make use of the object navigation keystrokes on the numpad itself, so, might want to then work with laptop layout, or something.


But, was quite impressed either way since, while it didn't stream any other audio from the PC to my phone, it provided NVDA's spoken output to me via talkback's voice, with only a very slight lag.


And, this meant I could otherwise pretty much make full use of the PC, the software on it, do web searches, read the results, etc. etc.


Stay well


Jacob Kruger
Blind Biker
Skype: BlindZA
"...resistance is futile...but, acceptance is versatile..."


Re: clickables

Gene
 

I sent this message to the wrong llist.

Gene

-----Original Message-----
From: Gene via groups.io
Sent: Monday, December 28, 2020 5:47 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] clickables

this site gives links to read four approved Catholic Bibles. You may want
to ask which version is used in your class and if the instructor cares which
version you use.
https://mycatholic.life/bible/

Gene
-----Original Message-----
From: Gene
Sent: Monday, December 28, 2020 5:36 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] clickables

Press enter on them just as you do for links. I'm not sure if NVDA reads
something as clickable at times when it isn't but that is what you do on a
properly clickable control.

Gene
-----Original Message-----
From: Robert Doc Wright godfearer
Sent: Monday, December 28, 2020 4:07 AM
To: nvda@nvda.groups.io
Subject: [nvda] clickables


How do I interact with clickables?
*********
family Times weekly Movie times



go to Doc's Stream
http://stream.wrighthere.net:8000/stream.mp3
Ask Miss A to play family times on tuneIn
You can also find family times on OoTunes.

Get the stream guide:
http://www.wrighthere.net/FamilyTimes/playingnow.html
********


walking in VictoryI welcome all that are interested in joining our
devotionals on Monday thru saturdays at 8am EST. join the devotion channel.
Also, there is a weekly bible study at 8pm EST in the Walking with Jesus
channel.


Add the following information in your TeamTalk
host address: wiv.wrighthere.net
TCP/UDP ports: 10333

entry name: walking in Victory
tab twice and press space on Add/update

or
https://www.dropbox.com/s/zfa8s6ragw0yltb/WalkingInVictory.tt?dl=1


Re: clickables

Gene
 

this site gives links to read four approved Catholic Bibles. You may want to ask which version is used in your class and if the instructor cares which version you use.
https://mycatholic.life/bible/

Gene

-----Original Message-----
From: Gene
Sent: Monday, December 28, 2020 5:36 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] clickables

Press enter on them just as you do for links. I'm not sure if NVDA reads
something as clickable at times when it isn't but that is what you do on a
properly clickable control.

Gene
-----Original Message-----
From: Robert Doc Wright godfearer
Sent: Monday, December 28, 2020 4:07 AM
To: nvda@nvda.groups.io
Subject: [nvda] clickables


How do I interact with clickables?
*********
family Times weekly Movie times



go to Doc's Stream
http://stream.wrighthere.net:8000/stream.mp3
Ask Miss A to play family times on tuneIn
You can also find family times on OoTunes.

Get the stream guide:
http://www.wrighthere.net/FamilyTimes/playingnow.html
********


walking in VictoryI welcome all that are interested in joining our
devotionals on Monday thru saturdays at 8am EST. join the devotion channel.
Also, there is a weekly bible study at 8pm EST in the Walking with Jesus
channel.


Add the following information in your TeamTalk
host address: wiv.wrighthere.net
TCP/UDP ports: 10333

entry name: walking in Victory
tab twice and press space on Add/update

or
https://www.dropbox.com/s/zfa8s6ragw0yltb/WalkingInVictory.tt?dl=1

6481 - 6500 of 86438