1. nvda@nvda.groups.io
   Date   
Re: tubi add on?

JM Casey
 

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Ame
Sent: June 7, 2020 8:20 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] tubi add on?

 

I’m using Chrome and have been for a long time..  What I can’t figure out is why it stopped automatically playing all of a sudden.  It’s been about a month.  I’ll surf the site and see what I can find about changes and how to do what with various browsers.
Re: need help with NVDARemote

Sarah k Alawami
 

I use a made up key. Let's say I wanted my key to be sarahsucks123. I could type that in. Or if I wanted the key to be nvda13, I just type that in, it can be letters and numbers.

hope that helps a bit.

Sarah Alawami, owner of TFFP. . For more info go to our website.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on [twitch.](http://twitch.tv/ke7zum] Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page You will also be able to buy some of my products and eBooks there.

Finally, to become a patron and help support the podcast go here

On 7 Jun 2020, at 16:59, Jackie wrote:

I don't know. When I used the key generator, it generated 7 or 8
numbers. I personally use something the client can relate to, ie, a
pet's name, etc.

On 6/7/20, Dean Martineau topdot@... wrote:

Jackie, this is what I was doing to no avail. I was using a simple key of
three numbers. Could this be the problem?

-----Original Message-----
From: nvda@nvda.groups.io nvda@nvda.groups.io On Behalf Of Jackie
Sent: Sunday, June 7, 2020 6:27 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] need help with NVDARemote

Dean, let's ensure a couple things.
1) Is the app actually installed? Press NVDA+n, then t & up arrow 1.
Does it say remote? If not, then the remote app isn't installed.)
2) Now try connecting. Once the connect option is chosen ensure that
client is selected & you're controlling the machine, & your trainee
has selected
to allow control from another machine.
3) Make certain you both have typed the same key in the key part of
the dialog. That means same case, whole 9yd. Then press ok.

f11 allows you to control the machine. Pressing it again lets you
access your own machine.

On 6/7/20, Tyler Spivey tspivey@... wrote:

Yes. What are you trying?

On 6/7/2020 2:52 PM, Dean Martineau wrote:

Good afternoon. It seems I could benefit from some handholding to use
NVDARemote. Both I and the trainee run the latest versions of NVDA and
the add-on. I can’t seem to connect to her. Is nvdaremote.com a valid
server? Clearly I’m missing something, probably very elementary, here.

Dean

--
Subscribe to a WordPress for Newbies Mailing List by sending a message to:
wp4newbs-request@... with 'subscribe' in the Subject field OR by
visiting the list page at http://www.freelists.org/list/wp4newbs
& check out my sites at www.brightstarsweb.com & www.mysitesbeenhacked.com

--
Subscribe to a WordPress for Newbies Mailing List by sending a message to:
wp4newbs-request@... with 'subscribe' in the Subject field OR by
visiting the list page at http://www.freelists.org/list/wp4newbs
& check out my sites at www.brightstarsweb.com & www.mysitesbeenhacked.com
How to hide rows with certain text value in Excel

Cristóbal
 

Hello list,

So, I’m having a bit of  a brain cramp here and need a refresher.

I periodically receive an excel spreadsheet (Office 2016) with hundreds of rows of data for my interpreting business. I have to select which assignments I can cover. There are a myriad of languages and services in this spreadsheet throughout the state of California. As I mainly cover Spanish language assignments, filtering by that language is easy enough, but within that language, there is another criteria in another cell specifying the type of interpretation service requested. Legal, Medical, standard, etc. So, I don’t really cover legal interpretation

And this is where I’m stuck. I’d like to be able to hide the appointments/rows where the requested service is “In Court Certified,” but can’t find where to do it. I’ve poked around online and there are some step-by-step instructions, but either I can’t follow the sequence or they involve macros. I’m not against using macros per say even though I’m not too familiar with them, but I figure there has to be a way to simply hide the rows I’m not interested in seeing and condensing the spreadsheet.

These appointments are pretty much first come first serve, so being able to better filter out the superfluous ones would be a huge help to my productivity instead of sifting through one by one to see if it’s legal or not.

I’m mainly a Jaws user, but I suppose this sort of inquiry can apply to Jaws or NVDA.

Any input would be appreciated.

Thanks,

Cristóbal

 
Re: tubi add on?

Ame
 

I’m using Chrome and have been for a long time..  What I can’t figure out is why it stopped automatically playing all of a sudden.  It’s been about a month.  I’ll surf the site and see what I can find about changes and how to do what with various browsers.
Re: need help with NVDARemote

Jackie
 

I don't know. When I used the key generator, it generated 7 or 8
numbers. I personally use something the client can relate to, ie, a
pet's name, etc.

On 6/7/20, Dean Martineau <topdot@gmail.com> wrote:
Jackie, this is what I was doing to no avail. I was using a simple key of
three numbers. Could this be the problem?



-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Jackie
Sent: Sunday, June 7, 2020 6:27 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] need help with NVDARemote

Dean, let's ensure a couple things.
1) Is the app actually installed? Press NVDA+n, then t & up arrow 1.
Does it say remote? If not, then the remote app isn't installed.)
2) Now try connecting. Once the connect option is chosen ensure that
client is selected & you're controlling the machine, & your trainee
has selected
to allow control from another machine.
3) Make certain you both have typed the same key in the key part of
the dialog. That means same case, whole 9yd. Then press ok.

f11 allows you to control the machine. Pressing it again lets you
access your own machine.

On 6/7/20, Tyler Spivey <tspivey@pcdesk.net> wrote:
Yes. What are you trying?

On 6/7/2020 2:52 PM, Dean Martineau wrote:
Good afternoon. It seems I could benefit from some handholding to use
NVDARemote. Both I and the trainee run the latest versions of NVDA and
the add-on. I can’t seem to connect to her. Is nvdaremote.com a valid
server? Clearly I’m missing something, probably very elementary, here.



Dean






--
Subscribe to a WordPress for Newbies Mailing List by sending a message to:
wp4newbs-request@freelists.org with 'subscribe' in the Subject field OR by
visiting the list page at http://www.freelists.org/list/wp4newbs
& check out my sites at www.brightstarsweb.com & www.mysitesbeenhacked.com






--
Subscribe to a WordPress for Newbies Mailing List by sending a message to:
wp4newbs-request@freelists.org with 'subscribe' in the Subject field OR by
visiting the list page at http://www.freelists.org/list/wp4newbs
& check out my sites at www.brightstarsweb.com & www.mysitesbeenhacked.com
Re: need help with NVDARemote

Dean Martineau <topdot@...>
 

Jackie, this is what I was doing to no avail. I was using a simple key of three numbers. Could this be the problem?

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Jackie
Sent: Sunday, June 7, 2020 6:27 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] need help with NVDARemote

Dean, let's ensure a couple things.
1) Is the app actually installed? Press NVDA+n, then t & up arrow 1.
Does it say remote? If not, then the remote app isn't installed.)
2) Now try connecting. Once the connect option is chosen ensure that
client is selected & you're controlling the machine, & your trainee
has selected
to allow control from another machine.
3) Make certain you both have typed the same key in the key part of
the dialog. That means same case, whole 9yd. Then press ok.

f11 allows you to control the machine. Pressing it again lets you
access your own machine.

On 6/7/20, Tyler Spivey <tspivey@pcdesk.net> wrote:
Yes. What are you trying?

On 6/7/2020 2:52 PM, Dean Martineau wrote:
Good afternoon. It seems I could benefit from some handholding to use
NVDARemote. Both I and the trainee run the latest versions of NVDA and
the add-on. I can’t seem to connect to her. Is nvdaremote.com a valid
server? Clearly I’m missing something, probably very elementary, here.



Dean






--
Subscribe to a WordPress for Newbies Mailing List by sending a message to:
wp4newbs-request@freelists.org with 'subscribe' in the Subject field OR by
visiting the list page at http://www.freelists.org/list/wp4newbs
& check out my sites at www.brightstarsweb.com & www.mysitesbeenhacked.com
Re: need help with NVDARemote

Jackie
 

Dean, let's ensure a couple things.
1) Is the app actually installed? Press NVDA+n, then t & up arrow 1.
Does it say remote? If not, then the remote app isn't installed.)
2) Now try connecting. Once the connect option is chosen ensure that
client is selected & you're controlling the machine, & your trainee
has selected
to allow control from another machine.
3) Make certain you both have typed the same key in the key part of
the dialog. That means same case, whole 9yd. Then press ok.

f11 allows you to control the machine. Pressing it again lets you
access your own machine.

On 6/7/20, Tyler Spivey <tspivey@pcdesk.net> wrote:
Yes. What are you trying?

On 6/7/2020 2:52 PM, Dean Martineau wrote:
Good afternoon. It seems I could benefit from some handholding to use
NVDARemote. Both I and the trainee run the latest versions of NVDA and
the add-on. I can’t seem to connect to her. Is nvdaremote.com a valid
server?  Clearly I’m missing something, probably very elementary, here.



Dean





--
Subscribe to a WordPress for Newbies Mailing List by sending a message to:
wp4newbs-request@freelists.org with 'subscribe' in the Subject field OR by
visiting the list page at http://www.freelists.org/list/wp4newbs
& check out my sites at www.brightstarsweb.com & www.mysitesbeenhacked.com
Re: tubi add on?

hurrikennyandopo ...
 

Hi Which browser are you using? In the tutorial there is a section of different ways in playing the videos. some will automatically just start and with some other browsers it starts a different way.


The page it comes off is http://accessibilitycentral.net/nvda%20tutorials%20for%20other%20programs.html

The subject line that you jump down to by headings is using tubi tv with nvda but has a little on mobile devices with the app. they are more accessible with talk back and have been told voice over and on my samsung tv it works with voice guide. some qwerks but I can live with that.


They are probably more accessible than the web part but if a few people asked them to add short cuts to the player and label  some of the buttons etc a lot of visually impaired people will be happy.



On the link given to where the tutorial can be found there i is a section on starting the movie/show with a browser.


hope it helps.


Gene nz


On 8/06/2020 9:57 am, Ame wrote:

Oh I know.  It’s neat.  Trouble is, whe nI use it on the computer, I click on things, look for clickable graphics and so forth and it never plays for me.  That’s my problem.  I can’t make it start playing.  I’ve even made sure java and flash and anything else that might pose a problem are activated and ready to go.
Re: need help with NVDARemote

Tyler Spivey
 

Yes. What are you trying?

On 6/7/2020 2:52 PM, Dean Martineau wrote:
Good afternoon. It seems I could benefit from some handholding to use
NVDARemote. Both I and the trainee run the latest versions of NVDA and
the add-on. I can’t seem to connect to her. Is nvdaremote.com a valid
server?  Clearly I’m missing something, probably very elementary, here.

 

Dean

 
need help with NVDARemote

Dean Martineau <topdot@...>
 

Good afternoon. It seems I could benefit from some handholding to use NVDARemote. Both I and the trainee run the latest versions of NVDA and the add-on. I can’t seem to connect to her. Is nvdaremote.com a valid server?  Clearly I’m missing something, probably very elementary, here.

 

Dean

 
Re: tubi add on?

Ame
 

Oh I know.  It’s neat.  Trouble is, whe nI use it on the computer, I click on things, look for clickable graphics and so forth and it never plays for me.  That’s my problem.  I can’t make it start playing.  I’ve even made sure java and flash and anything else that might pose a problem are activated and ready to go.
Re: my normal mode suddenly changes to text review mode

David Goldfield
 

Hello. I think that we may need some additional information as there are things you have written that I honestly am not following.


NVDA does have what is called a screen review mode. However, this affects only how the numeric keypad is used for reading text but this mode does not affect standard arrow key navigation. I am also not aware of an insert-backspace command.

Could you please be a bit more specific in what you are experiencing?

In other words what exactly happens when you open a document and you try to navigate through it? Please provide the exact steps you are taking, along with specific keystrokes you are using. Are you using the number pad or the standard arrow keys for navigation?

What exactly is happening when you try to navigate through a document and what are you expecting NVDA to do that it is not doing?

David Goldfield,
Blindness Assistive Technology Specialist
JAWS Certified, 2019

WWW.DavidGoldfield.org

On 6/7/2020 12:09 PM, Aschalew Byness wrote:
Hi friends
Sometimes, when I read a document in Word or Notepad, I find myself in
text review mode. Hence, I can’t edit or navigate with system carret.
I cann’t even get back to normal mode by pressing insert+back space.
why does it become like that? What is the solution?
Re: NVDA and Audacity recordings

Hettie
 

Thanks Paul, just installed it.


Hettie


On 2020/06/06 12:28 pm, bering.p wrote:
Hi.
About the add-on for Audacity:
The current add-on repository link is :
https://github.com/paulber19/audacityAccessEnhancementNVDAAddon

And the link to download the current add-on version conpatible with nvda 2020.1 is:
v1.4.4

Best regards.
Paul.
Le 04/06/2020 16:37, Brian Vogel a écrit :
Hettie,

            Hello and welcome to the NVDA Group.   Specific questions on how to use Audacity itself are not on-topic for the main NVDA Group.  I will give the e-mail addresses for our Chat Subgroup, where they are appropriate, in a few moments.  I wanted to make sure you had membership established in the NVDA Group since you must have that before you can join the Chat Subgroup.

             I know we have (or have had, the group always has some flux) members who are active Audacity users.  There also appears to be an unofficial NVDA add-on for Audacity (https://github.com/paulber007/AudacityNVDAAddon)  but it does not appear to be under active support and would not be compatible with the current version of NVDA.

             I thought there was a group on Groups.io for blind users of Audacity, but I can't find it.  I'm almost certain one exists, so I'll allow someone else to point you in its direction.

             Should you wish to ask specific questions about using Audacity itself.  That should be done on our Chat Subgroup.  Here is the vital information for that:

 
 
To receive a message containing the group description, and a list of these commands:  chat+help@nvda.groups.io
 
To stop receiving messages via email (you may still read messages on the Web):  chat+nomail@nvda.groups.io
This can also be used to put a vacation stop on group messages, then use one of the addresses below to resume delivery in the format of your choice.
 
To receive each group messages individually:  chat+single@nvda.groups.io
This is the default delivery unless you send a message to one of the addresses that follows.
 
To receive group messages in an HTML formatted digest:  chat+fulldigest@nvda.groups.io
 
To receive group messages in a plain text digest:  chat+digest@nvda.groups.io
 
To receive a daily summary instead of individual messages:  chat+summary@nvda.groups.io
 
To receive only special messages:  chat+special@nvda.groups.io
  
To contact the group owner(s):  chat+owner@nvda.groups.io
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Science has become just another voice in the room; it has lost its platform.  Now, you simply declare your own truth.

      ~ Dr. Paul A. Offit, in New York Times article, How Anti-Vaccine Sentiment Took Hold in the United States, September 23, 2019

 

 



Virus-free. www.avg.com

Re: my normal mode suddenly changes to text review mode

Tyler Spivey
 

Try NVDA+space.

On 6/7/2020 9:09 AM, Aschalew Byness wrote:
Hi friends
Sometimes, when I read a document in Word or Notepad, I find myself in
text review mode. Hence, I can’t edit or navigate with system carret.
I cann’t even get back to normal mode by pressing insert+back space.
why does it become like that? What is the solution?
my normal mode suddenly changes to text review mode

Aschalew Byness
 

Hi friends
Sometimes, when I read a document in Word or Notepad, I find myself in
text review mode. Hence, I can’t edit or navigate with system carret.
I cann’t even get back to normal mode by pressing insert+back space.
why does it become like that? What is the solution?
Re: brltty

Angelo Sonnesso
 

What Braille display are you using?



73 N2DYN Angelo

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Jason White via groups.io
Sent: Sunday, June 7, 2020 11:51 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] brltty

If it were a Linux system, I might be in a position to help, but
unfortunately I'm not familiar with Windows serial port handling or
whether BRLTTY supports it.

I would suggest asking on the BRLTTY list. You'll probably have to
specify the name of the serial device and the BRLTTY braille driver on
the command line or in the brltty.conf configuration file.

On 6/6/20 10:57 AM, Joe Paton wrote:
Hi,
would somebody be able to help me configure brltty to work with an
external braille display connected via a p c i serial card running
windows 10 and n v d a latest version
on the box?
I've looked on the brltty homepage site, and i became pathetically
confused.
Thanks.

or direct me to an understandable resource for an old brain to
cope with.

Thanks.
Re: sends the contents of the clipboard to the remote machine

Chris Mullins
 

Hi Rui

That is good to know but I think it rases an issue.  I appreciate that text should be able to pass both ways within the remote connection but having a Push option on each end blurs the distinction between the controlling and controlled computers.  The user of the controlled computer is able to use the push command and compromise the clipboard of the controlling computer, which should not be so.  Could the “push clipboard” entry on the Remote Menu be replaced by  “Push clipbord to remote” and “Pull clipboard from remote” entries which are greyed out on a machine if it is connected as a controlled computer.  When the controlling user uses the Pull command, it could execute the “push” related code on the controlled computer, so would utilise existing routines but functionality would be where it should be, with the Controlling machine.         

 

I am a big fan of the Remote Support feature of NVDA but I don’t find the associated Help text very helpful.

 

Cheers

Chris

From: Rui Fontes
Sent: 07 June 2020 15:06
To: nvda@nvda.groups.io
Subject: Re: [nvda] sends the contents of the clipboard to the remote machine

 

It works in both directions...

 

I have used it several times...

 

Rui Fontes

NVDA portuguese team

 

Às 15:02 de 07/06/2020, Chris Mullins escreveu:

Hi

In the help guide of the Remote Support add-on it states:

“The Push clipboard option in the remote menu allows you to push text from your clipboard. when activated, any text on the clipboard will be pushed to the other machines.”

What it doesn’t say is whether this command can be executed on both the controlling and controlled computers in the remote session.  When I have been the controlling user in a remote session I have used the Push Clipboard command to enable me to populate a text file previously created on the controlled machine but I have never done it the other way around as Luke describes below.    

 

Cheers

Chris

    

From: Luke Davis
Sent: 07 June 2020 05:14
To: nvda@nvda.groups.io
Subject: Re: [nvda] sends the contents of the clipboard to the remote machine

 

On Sat, 6 Jun 2020, Kevin Cussick via groups.io wrote:

 

> Hi,   this only works with text right?   You can not copy a file from local

> machine and send it to the remote machine?

 

I have not tried it with graphical content or other formatted type text or data.

I have transferred word documents this way, by opening them on the remote,

selecting all, copying, sending it to the control, and pasting into another word

document on my local machine.

 

A pain, but it works.

 

And if there is a MIME encoder (or UU Encoder) on the remote, any file could be

losslessly converted to text and moved this way.  But that is a lot of effort.

 

Luke

 

 

 

 

 
Re: brltty

Jason White
 

If it were a Linux system, I might be in a position to help, but unfortunately I'm not familiar with Windows serial port handling or whether BRLTTY supports it.

I would suggest asking on the BRLTTY list. You'll probably have to specify the name of the serial device and the BRLTTY braille driver on the command line or in the brltty.conf configuration file.

On 6/6/20 10:57 AM, Joe Paton wrote:
Hi,
would somebody be able to help me configure brltty to work with an
external braille display connected via a p c i serial card running
windows 10 and n v d a latest version
on the box?
I've looked on the brltty homepage site, and i became pathetically
confused.
Thanks.

or direct me to an understandable resource for an old brain to
cope with.

Thanks.
Re: sends the contents of the clipboard to the remote machine

Rui Fontes
 

It works in both directions...


I have used it several times...


Rui Fontes

NVDA portuguese team


Às 15:02 de 07/06/2020, Chris Mullins escreveu:

Hi

In the help guide of the Remote Support add-on it states:

“The Push clipboard option in the remote menu allows you to push text from your clipboard. when activated, any text on the clipboard will be pushed to the other machines.”

What it doesn’t say is whether this command can be executed on both the controlling and controlled computers in the remote session.  When I have been the controlling user in a remote session I have used the Push Clipboard command to enable me to populate a text file previously created on the controlled machine but I have never done it the other way around as Luke describes below.    

 

Cheers

Chris

    

From: Luke Davis
Sent: 07 June 2020 05:14
To: nvda@nvda.groups.io
Subject: Re: [nvda] sends the contents of the clipboard to the remote machine

 

On Sat, 6 Jun 2020, Kevin Cussick via groups.io wrote:

 

> Hi,   this only works with text right?   You can not copy a file from local

> machine and send it to the remote machine?

 

I have not tried it with graphical content or other formatted type text or data.

I have transferred word documents this way, by opening them on the remote,

selecting all, copying, sending it to the control, and pasting into another word

document on my local machine.

 

A pain, but it works.

 

And if there is a MIME encoder (or UU Encoder) on the remote, any file could be

losslessly converted to text and moved this way.  But that is a lot of effort.

 

Luke

 

 

 

 
Re: sends the contents of the clipboard to the remote machine

Chris Mullins
 

Hi

In the help guide of the Remote Support add-on it states:

“The Push clipboard option in the remote menu allows you to push text from your clipboard. when activated, any text on the clipboard will be pushed to the other machines.”

What it doesn’t say is whether this command can be executed on both the controlling and controlled computers in the remote session.  When I have been the controlling user in a remote session I have used the Push Clipboard command to enable me to populate a text file previously created on the controlled machine but I have never done it the other way around as Luke describes below.    

 

Cheers

Chris

    

From: Luke Davis
Sent: 07 June 2020 05:14
To: nvda@nvda.groups.io
Subject: Re: [nvda] sends the contents of the clipboard to the remote machine

 

On Sat, 6 Jun 2020, Kevin Cussick via groups.io wrote:

 

> Hi,   this only works with text right?   You can not copy a file from local

> machine and send it to the remote machine?

 

I have not tried it with graphical content or other formatted type text or data.

I have transferred word documents this way, by opening them on the remote,

selecting all, copying, sending it to the control, and pasting into another word

document on my local machine.

 

A pain, but it works.

 

And if there is a MIME encoder (or UU Encoder) on the remote, any file could be

losslessly converted to text and moved this way.  But that is a lot of effort.

 

Luke

 

 

 

 
6621 - 6640 of 81008  
More
Home Messages Hashtags Subgroups About Features Pricing Updates Terms Help Twitter