Date   

Re: Slow NVDA responses in ribbons

Brian's Mail list account <bglists@...>
 

I'm just wondering if it has ever worked fast in nvda. If yes then something has obviously changed.
I have experienced issues with amd machines running 10 in the past, but 12 megs of memory should be OK as long as it is all the same and in the recommended sockets. Some machines don't like mixed up memory.

Two cores in my experience can be jerky on 10 and since I do not have a later word than 2007 its hard to say more in this respect.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Gene" <gsasner@ripco.com>
To: <nvda@nvda.groups.io>
Sent: Saturday, January 28, 2017 4:16 PM
Subject: Re: [nvda] Slow NVDA responses in ribbons


I don't know what might be causing the problem nor how to find out. Since you do get a response but a slow one, I don't know if logs might contain any useful information. Others with more technical knowledge might be able to advise about that.

I don't recall what has been recommended in terms of earlier versions of NVDA to try but you may not have gone back far enough. Again, others will have to comment on that. Also, I don't recall if using an earlier version was supposed to address a performance problem like this.

Do these kinds of problems only occur with Office programs? You have only written about problems regarding Office but I don't want to assume that no other programs have such problems.
Gene
----- Original Message -----

From: Greg Rhodes
Sent: Saturday, January 28, 2017 9:58 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Slow NVDA responses in ribbons


I have tried the Window-Eyes for Office screen reader and Microsoft's Narrator. Both of them give me quick auditory feedback when I hit Alt to get into the ribbon and navigate within ribbon tabs and ribbon elements.

Sent from my iPhone

On Jan 28, 2017, at 9:46 AM, Gene <gsasner@ripco.com> wrote:


Also, you haven't indicated if you have done anything to determine whether the problem is caused by NVDA at all. In such cases, testing should be done with another screen-reader, such as with a JAWS demo to compare performance. Do you know how Word runs with another screen-reader?

Gene
----- Original Message -----

From: Brian Vogel
Sent: Saturday, January 28, 2017 9:00 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Slow NVDA responses in ribbons


Greg,

Have you tried using the portable version of NVDA just to see if it behaves any differently than the installed version?

I have never experienced the problem you describe and my gut is telling me it's more likely something that's gone wonky with the Office installation than with NVDA. You might also consider running a repair on Office to see if that fixes anything.

I have Office 2010 and have not experienced what you describe as happening with it or other versions of Office when working with clients who have NVDA.
--
Brian


If you think that you can think about a thing, inextricably attached to something else, without thinking of the thing it is attached to, then you have a legal mind.

~ Thomas Reed Powell


Re: Slow NVDA responses in ribbons

Chris
 

You could try another synth or voice see if that improves things or try reset to default settings then try if that improves things as you may have enabled an setting which uses a lot of resources

The only other thing maybe to completely uninstall nvda along with is profile

 

               


Re: Slow NVDA responses in ribbons

Brian's Mail list account <bglists@...>
 

Funnily enough even the old 2002 version of office runs well under 10, as long as you don't mind its strange resolution, and I don't cos I'm not using a monotor!
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Brian Vogel" <britechguy@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Saturday, January 28, 2017 3:00 PM
Subject: Re: [nvda] Slow NVDA responses in ribbons


Greg,

Have you tried using the portable version of NVDA just to see if it behaves any differently than the installed version?

I have never experienced the problem you describe and my gut is telling me it's more likely something that's gone wonky with the Office installation than with NVDA. You might also consider running a repair on Office to see if that fixes anything.

I have Office 2010 and have not experienced what you describe as happening with it or other versions of Office when working with clients who have NVDA.
--
*Brian*

If you think that you can think about a thing, inextricably attached to something else, without thinking of the thing it is attached to, then you have a legal mind.

~ Thomas Reed Powell


Re: Slow NVDA responses in ribbons

Brian's Mail list account <bglists@...>
 

No not seen anything like this. I still feel something else is happening in your machine eating processor or other resources.

The previous version of nvda is 2016.3. the issues are the year followed by a number, the first of which is the major one and any second one might be a bug fix. there are usually four a year.
If anything I find the latest one fastest of all on windows 10, but one thing I have to say, AMD chipset machines seem to be slower than Intel ones with the same given ram for some reason.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Greg Rhodes" <gkrhodes@suddenlink.net>
To: <nvda@nvda.groups.io>
Sent: Saturday, January 28, 2017 1:40 PM
Subject: [nvda] Slow NVDA responses in ribbons


I’ve written before about having sluggish NVDA feedback when navigating ribbons in MS Word and MS Excel. I’m running the Windows 10 Anniversary and had been using Office 2010. When I press the Alt key to go to the ribbon or when I arrow between ribbon tabs, I frequently have a 4 to 10 second delay before I get NVDA auditory feedback saying where I am. I thought this might be an Office 2010/NVDA compatibility issue so I upgraded to Office 2016. I’m still having the same problem. I have my PC’s Power setting on high. I 'experienced the problem with the latest version of NVDA. Someone suggested I try an earlier version so I uninstalled the latest version and installed the prior version (I believe it was 8.3). No improvement.

I really would like to use and support NVDA but can’t do it unless I can get quicker auditory feedback when navigating in the ribbon. Also have frequent issues with NVDA going silent. As I recall, I can Alt/Tab out and back into the document I’m working on and NVDA will start talking again.

Any thoughts or suggestions? Are other people having these issues? Thanks.


Re: Slow NVDA responses in ribbons

Brian's Mail list account <bglists@...>
 

Even on xp 2007 is pretty fast on menus on a single core Pent 4, so a bit at a loss.
could there be something else going on that you are unaware of. Lets see, virus scans, backups, downloading updates, etc, something like that. In which case I'd expect more than menus to be affected. What sort of resolution do you have and is the video an on board one that uses ram from the system.
The ram being low makes stuff use virtual memory otherwise known as the hard drive and if its quite slow, fragmented or almost full this effect gets worse.
How long does a first opening of firefox take?
This slows down a lot if things are busy. Look at processor usage with the resource monitor add on for nvda or just open task manager and have a poke around.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Ralf Kefferpuetz" <ralf.kefferpuetz@elra-consulting.de>
To: <nvda@nvda.groups.io>
Sent: Saturday, January 28, 2017 1:54 PM
Subject: Re: [nvda] Slow NVDA responses in ribbons


Hello,

I’m running NVDA 2016/4 with Office 2016 and can’t see any sluggish behavior when navigating the ribbons in Excel or Word. It is all superfast for me.



Cheers,

Ralf



From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Greg Rhodes
Sent: Samstag, 28. Januar 2017 14:41
To: nvda@nvda.groups.io
Subject: [nvda] Slow NVDA responses in ribbons



I’ve written before about having sluggish NVDA feedback when navigating ribbons in MS Word and MS Excel. I’m running the Windows 10 Anniversary and had been using Office 2010. When I press the Alt key to go to the ribbon or when I arrow between ribbon tabs, I frequently have a 4 to 10 second delay before I get NVDA auditory feedback saying where I am. I thought this might be an Office 2010/NVDA compatibility issue so I upgraded to Office 2016. I’m still having the same problem. I have my PC’s Power setting on high. I 'experienced the problem with the latest version of NVDA. Someone suggested I try an earlier version so I uninstalled the latest version and installed the prior version (I believe it was 8.3). No improvement.



I really would like to use and support NVDA but can’t do it unless I can get quicker auditory feedback when navigating in the ribbon. Also have frequent issues with NVDA going silent. As I recall, I can Alt/Tab out and back into the document I’m working on and NVDA will start talking again.



Any thoughts or suggestions? Are other people having these issues? Thanks.


Re: Problem

Brian's Mail list account <bglists@...>
 

On the other hand of course, normally hard wired normal 23.5mm headphones physically cut out the speakers when plugged in. The problem could be that they are in fact usb headphones and for some reason the system is getting confused about the sound output device. I've no idea which version of Windows this might be, but I've had this thing happen on windows 7 between the internal sound and a sound box in a usb connector. What happens I soon discovered was that the usb box has to always go into the socket it went into when it installed its drivers or it sometimes loses the memory of what is going on and puts it out through the internal device.

Probably really naff drivers.
However if it is the actual hardware analogue lets call them headphones it might be that the socket they plug into is damaged or intermittent or just plain dirty. In a case like that the cost of getting it taken apart and fixed will be way over what the machine is probably worth I'd say. So I'd definitely get some usb headphones for that problem.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Gene" <gsasner@ripco.com>
To: <nvda@nvda.groups.io>
Sent: Friday, January 27, 2017 6:26 PM
Subject: Re: [nvda] Problem


You may have to solve the problem by using a cheap USB sound card or by using USB headphones.

Gene
----- Original Message -----

From: Sakina
Sent: Friday, January 27, 2017 12:14 PM
To: nvda@nvda.groups.io
Subject: [nvda] Problem


Hello friends,



A friend has given me his old laptop which he does not use any more. I am happy using it as it has got word 2007 instead of 2003 which I had. I use the ordinary head phones inorder not to disturb any one around me.

Works well but all of a sudden the sound stops coming out of the headphone and the sound comes from the laptop itself.

I do not know why that is happening as the headphones are still attached .

I shut the laptop down and restart all over again. Then again it would do the same thing as above after half an hour or so. I prefer to listen through ear phones only all the time and wish to cure this problem.

Please I will gratefully receive any advise. Please also I am not very technically minded and the guidance in simple way will be very helpful.

Thank you all and with best wishes

Sakina




--------------------------------------------------------------------------------
This email has been checked for viruses by Avast antivirus software.
www.avast.com


Re: Slow NVDA responses in ribbons

Gene
 

I don't know what might be causing the problem nor how to find out.  Since you do get a response but a slow one, I don't know if logs might contain any useful information.  Others with more technical knowledge might be able to advise about that. 
 
I don't recall what has been recommended in terms of earlier versions of NVDA to try but you may not have gone back far enough.  Again, others will have to comment on that.  Also, I don't recall if using an earlier version was supposed to address a performance problem like this. 
 
Do these kinds of problems only occur with Office programs?  You have only written about problems regarding Office but I don't want to assume that no other programs have such problems.
Gene

----- Original Message -----
Sent: Saturday, January 28, 2017 9:58 AM
Subject: Re: [nvda] Slow NVDA responses in ribbons

I have tried  the Window-Eyes for Office screen reader and Microsoft's Narrator. Both of them give me quick auditory feedback when I hit Alt to get into the ribbon and navigate within ribbon tabs and ribbon elements.

Sent from my iPhone

On Jan 28, 2017, at 9:46 AM, Gene <gsasner@...> wrote:

Also, you haven't indicated if you have done anything to determine whether the problem is caused by NVDA at all.  In such cases, testing should be done with another screen-reader, such as with a JAWS demo to compare performance. Do you know how Word runs with another screen-reader? 
 
Gene
----- Original Message -----
Sent: Saturday, January 28, 2017 9:00 AM
Subject: Re: [nvda] Slow NVDA responses in ribbons

Greg,

          Have you tried using the portable version of NVDA just to see if it behaves any differently than the installed version?

          I have never experienced the problem you describe and my gut is telling me it's more likely something that's gone wonky with the Office installation than with NVDA.  You might also consider running a repair on Office to see if that fixes anything.

          I have Office 2010 and have not experienced what you describe as happening with it or other versions of Office when working with clients who have NVDA.
--
Brian

    If you think that you can think about a thing, inextricably attached to something else, without thinking of the thing it is attached to, then you have a legal mind.

        ~ Thomas Reed Powell



Re: Slow NVDA responses in ribbons

 

Hi,

Can you try running NVDA with add-ons disabled? To do this, press NVDA+Q to bring up exit NVDA dialog, then choose “Restart with add-ons disabled” and press ENTER. If this does not resolve issues, chances are that it’s got to do with something deeper than just NVDA.

Cheers,

Joseph

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Greg Rhodes
Sent: Saturday, January 28, 2017 7:59 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Slow NVDA responses in ribbons

 

I have tried  the Window-Eyes for Office screen reader and Microsoft's Narrator. Both of them give me quick auditory feedback when I hit Alt to get into the ribbon and navigate within ribbon tabs and ribbon elements.

Sent from my iPhone


On Jan 28, 2017, at 9:46 AM, Gene <gsasner@...> wrote:

Also, you haven't indicated if you have done anything to determine whether the problem is caused by NVDA at all.  In such cases, testing should be done with another screen-reader, such as with a JAWS demo to compare performance. Do you know how Word runs with another screen-reader? 

 

Gene

----- Original Message -----

Sent: Saturday, January 28, 2017 9:00 AM

Subject: Re: [nvda] Slow NVDA responses in ribbons

 

Greg,

          Have you tried using the portable version of NVDA just to see if it behaves any differently than the installed version?

          I have never experienced the problem you describe and my gut is telling me it's more likely something that's gone wonky with the Office installation than with NVDA.  You might also consider running a repair on Office to see if that fixes anything.

          I have Office 2010 and have not experienced what you describe as happening with it or other versions of Office when working with clients who have NVDA.
--
Brian

    If you think that you can think about a thing, inextricably attached to something else, without thinking of the thing it is attached to, then you have a legal mind.

        ~ Thomas Reed Powell

 


Re: Slow NVDA responses in ribbons

Greg Rhodes
 

I have tried  the Window-Eyes for Office screen reader and Microsoft's Narrator. Both of them give me quick auditory feedback when I hit Alt to get into the ribbon and navigate within ribbon tabs and ribbon elements.

Sent from my iPhone

On Jan 28, 2017, at 9:46 AM, Gene <gsasner@...> wrote:

Also, you haven't indicated if you have done anything to determine whether the problem is caused by NVDA at all.  In such cases, testing should be done with another screen-reader, such as with a JAWS demo to compare performance. Do you know how Word runs with another screen-reader? 
 
Gene
----- Original Message -----
Sent: Saturday, January 28, 2017 9:00 AM
Subject: Re: [nvda] Slow NVDA responses in ribbons

Greg,

          Have you tried using the portable version of NVDA just to see if it behaves any differently than the installed version?

          I have never experienced the problem you describe and my gut is telling me it's more likely something that's gone wonky with the Office installation than with NVDA.  You might also consider running a repair on Office to see if that fixes anything.

          I have Office 2010 and have not experienced what you describe as happening with it or other versions of Office when working with clients who have NVDA.
--
Brian

    If you think that you can think about a thing, inextricably attached to something else, without thinking of the thing it is attached to, then you have a legal mind.

        ~ Thomas Reed Powell



Re: Slow NVDA responses in ribbons

Gene
 

Also, you haven't indicated if you have done anything to determine whether the problem is caused by NVDA at all.  In such cases, testing should be done with another screen-reader, such as with a JAWS demo to compare performance. Do you know how Word runs with another screen-reader? 
 
Gene

----- Original Message -----
Sent: Saturday, January 28, 2017 9:00 AM
Subject: Re: [nvda] Slow NVDA responses in ribbons

Greg,

          Have you tried using the portable version of NVDA just to see if it behaves any differently than the installed version?

          I have never experienced the problem you describe and my gut is telling me it's more likely something that's gone wonky with the Office installation than with NVDA.  You might also consider running a repair on Office to see if that fixes anything.

          I have Office 2010 and have not experienced what you describe as happening with it or other versions of Office when working with clients who have NVDA.
--
Brian

    If you think that you can think about a thing, inextricably attached to something else, without thinking of the thing it is attached to, then you have a legal mind.

        ~ Thomas Reed Powell



Re: Problem

 

Related to Gene's suggestion, if you happen to already own Bluetooth headphones or speakers you could also buy a USB bluetooth adapter and use those, or buy both if you prefer a non-corded option.
--
Brian

    If you think that you can think about a thing, inextricably attached to something else, without thinking of the thing it is attached to, then you have a legal mind.

        ~ Thomas Reed Powell



Re: Slow NVDA responses in ribbons

 

Greg,

          Have you tried using the portable version of NVDA just to see if it behaves any differently than the installed version?

          I have never experienced the problem you describe and my gut is telling me it's more likely something that's gone wonky with the Office installation than with NVDA.  You might also consider running a repair on Office to see if that fixes anything.

          I have Office 2010 and have not experienced what you describe as happening with it or other versions of Office when working with clients who have NVDA.
--
Brian

    If you think that you can think about a thing, inextricably attached to something else, without thinking of the thing it is attached to, then you have a legal mind.

        ~ Thomas Reed Powell



Re: Slow NVDA responses in ribbons

Greg Rhodes
 

Sorry, should have checked the NVDA release. I had installed the 2016.4 and went back to 2016.3 to see if that would resolve the slow response issue. Didn't help. My PC is an HP Pavillion (about 3 years old). It had 4 GB RAM but I added 8 GB so it has 12 GB RAM. It has an AMD A6-5200 processor. I'm guessing it is a dual core but would need to check further to confirm. Thanks.

-----Original Message-----
From: Antony Stone
Sent: Saturday, January 28, 2017 7:52 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Slow NVDA responses in ribbons

What was it that you downgraded to version 8.3?

There is no version of NVDA named 8.3, and Office 2010 and Office 2016 are, well,
versions 2010 and 2016 (unless there's some hidden version number I'm not
aware of, like Windows XP was actually version "NT 5" and Windows Vista was
actually version "NT 6"?).

Also, knowing a bit more about your PC might help to diagnose the problem -
how many CPU cores? How much RAM?


Antony.

On Saturday 28 January 2017 at 14:40:41, Greg Rhodes wrote:

I’ve written before about having sluggish NVDA feedback when navigating
ribbons in MS Word and MS Excel. I’m running the Windows 10 Anniversary
and had been using Office 2010. When I press the Alt key to go to the
ribbon or when I arrow between ribbon tabs, I frequently have a 4 to 10
second delay before I get NVDA auditory feedback saying where I am. I
thought this might be an Office 2010/NVDA compatibility issue so I
upgraded to Office 2016. I’m still having the same problem. I have my PC’s
Power setting on high. I 'experienced the problem with the latest version
of NVDA. Someone suggested I try an earlier version so I uninstalled the
latest version and installed the prior version (I believe it was 8.3). No
improvement.

I really would like to use and support NVDA but can’t do it unless I can
get quicker auditory feedback when navigating in the ribbon. Also have
frequent issues with NVDA going silent. As I recall, I can Alt/Tab out and
back into the document I’m working on and NVDA will start talking again.

Any thoughts or suggestions? Are other people having these issues? Thanks.
--
These clients are often infected by viruses or other malware and need to be
fixed. If not, the user at that client needs to be fixed...

- Henrik Nordstrom, on Squid users' mailing list

Please reply to the list;
please *don't* CC me.


Re: Slow NVDA responses in ribbons

Ralf Kefferpuetz
 

Hello,

I’m running NVDA 2016/4 with Office 2016 and can’t see any sluggish behavior when navigating the ribbons in Excel or Word. It is all superfast for me.

 

Cheers,

  Ralf

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Greg Rhodes
Sent: Samstag, 28. Januar 2017 14:41
To: nvda@nvda.groups.io
Subject: [nvda] Slow NVDA responses in ribbons

 

I’ve written before about having sluggish NVDA feedback when navigating ribbons in MS Word and MS Excel. I’m running the Windows 10 Anniversary and had been using Office 2010. When I press the Alt key to go to the ribbon or when I arrow between ribbon tabs, I frequently have a 4 to 10 second delay before I get NVDA auditory feedback saying where I am. I thought this might be an Office 2010/NVDA compatibility issue so I upgraded to Office 2016. I’m still having the same problem. I have my PC’s Power setting on high. I 'experienced the problem with the latest version of NVDA. Someone suggested I try an earlier version so I uninstalled the latest version and installed the prior version (I believe it was 8.3). No improvement.

 

I really would like to use and support NVDA but can’t do it unless I can get quicker auditory feedback when navigating in the ribbon. Also have frequent issues with NVDA going silent. As I recall, I can Alt/Tab out and back into the document I’m working on and NVDA will start talking again.

 

Any thoughts or suggestions? Are other people having these issues? Thanks.


Re: Slow NVDA responses in ribbons

Antony Stone
 

What was it that you downgraded to version 8.3?

There is no version of NVDA named 8.3, and Office 2010 and Office 2016 are, well,
versions 2010 and 2016 (unless there's some hidden version number I'm not
aware of, like Windows XP was actually version "NT 5" and Windows Vista was
actually version "NT 6"?).

Also, knowing a bit more about your PC might help to diagnose the problem -
how many CPU cores? How much RAM?


Antony.

On Saturday 28 January 2017 at 14:40:41, Greg Rhodes wrote:

I’ve written before about having sluggish NVDA feedback when navigating
ribbons in MS Word and MS Excel. I’m running the Windows 10 Anniversary
and had been using Office 2010. When I press the Alt key to go to the
ribbon or when I arrow between ribbon tabs, I frequently have a 4 to 10
second delay before I get NVDA auditory feedback saying where I am. I
thought this might be an Office 2010/NVDA compatibility issue so I
upgraded to Office 2016. I’m still having the same problem. I have my PC’s
Power setting on high. I 'experienced the problem with the latest version
of NVDA. Someone suggested I try an earlier version so I uninstalled the
latest version and installed the prior version (I believe it was 8.3). No
improvement.

I really would like to use and support NVDA but can’t do it unless I can
get quicker auditory feedback when navigating in the ribbon. Also have
frequent issues with NVDA going silent. As I recall, I can Alt/Tab out and
back into the document I’m working on and NVDA will start talking again.

Any thoughts or suggestions? Are other people having these issues? Thanks.
--
These clients are often infected by viruses or other malware and need to be
fixed. If not, the user at that client needs to be fixed...

- Henrik Nordstrom, on Squid users' mailing list

Please reply to the list;
please *don't* CC me.


Slow NVDA responses in ribbons

Greg Rhodes
 

I’ve written before about having sluggish NVDA feedback when navigating ribbons in MS Word and MS Excel. I’m running the Windows 10 Anniversary and had been using Office 2010. When I press the Alt key to go to the ribbon or when I arrow between ribbon tabs, I frequently have a 4 to 10 second delay before I get NVDA auditory feedback saying where I am. I thought this might be an Office 2010/NVDA compatibility issue so I upgraded to Office 2016. I’m still having the same problem. I have my PC’s Power setting on high. I 'experienced the problem with the latest version of NVDA. Someone suggested I try an earlier version so I uninstalled the latest version and installed the prior version (I believe it was 8.3). No improvement.
 
I really would like to use and support NVDA but can’t do it unless I can get quicker auditory feedback when navigating in the ribbon. Also have frequent issues with NVDA going silent. As I recall, I can Alt/Tab out and back into the document I’m working on and NVDA will start talking again.
 
Any thoughts or suggestions? Are other people having these issues? Thanks.


Re: Keep up with NV Access through "In-Process", our new blog

Quentin Christensen
 

Hi Ben,

Yes that looks like it should work!  Week 2 and we've already fallen a week behind in it - although we usually have our weekly meeting on a Thursday and the contents for In Process comes out of that meeting.  This week Thursday was a public holiday for Australia Day, but we'll be back next week!

Regards

Quentin.

On Sat, Jan 28, 2017 at 5:55 PM, Ben J. Bloomgren <bbloomgren@...> wrote:

Hello, quentin,


I saw a feed called In Process category feed. The RSS address is http://www.nvaccess.org/category/in-process/feed/


Is this a good feed to use to keep in touch with In Process?


Ben


On 1/26/2017 22:48, Gene New Zealand wrote:

Hi Quentin

Thanks for letting me know that. What I might do then, is leave the link to the podcast page, remove my how to make Libre Office and Open Office accessible page (since both of these are now accessible), and add in a link to the new In Process page to all the NVDA related pages!

Regards,

Gene NZ


On 21/01/2017 4:42 PM, Quentin Christensen wrote:
Hi everyone,

Thanks for all the positive feedback on the new blog!  Thanks also Bhavya for sharing the announcement a bit wider too.

Hank, did you want the address for the In-Process blog?  It's here: http://www.nvaccess.org/category/in-process/

The main NV Access website is unchanged, it's still http://www.nvaccess.org/

Gene, re the podcast, we've talked about reviving that, but started the blog back up again first.

Kind regards

Quentin.

On Fri, Jan 20, 2017 at 8:42 PM, nasrin khaksar <nasrinkhaksar3@...> wrote:
hi quentin.
i realy appreciate the link.
i studied it and it was very great.
specially, for me because i realy wish that know whats new in newer
version of nvda prior to its release!
thanks extremely for your great work and God bless you.

On 1/20/17, Gene New Zealand <hurrikennyandopo@...z> wrote:
> Hi Quentin.
>
>
> I just read the first post that was sent to the list. it is good to see the
> blog part come back, they used to do it along time ago. I enjoyed reading
> what was happening. A quick question will the podcast side of it come back?
> I just looked and the last official one was a year ago with some of the
> community doing them for others to see what was in each release
>
>
> if the podcast part is not to come back I will redirect the links from the
> podcast page to the blog that will be coming out from now on.
>
> That will be on my pages that have nvda tutorials on them.
>
>
> It will be good so more people know about the blog.
>
>
> Gene nz
>
>
> .
>
> On 20/01/2017 6:31 PM, Quentin Christensen wrote:
> Hi everyone,
>
> NV Access has a new blog called "In-Process".  We will keep you up to date
> with the week to week happenings from the organisation, staff and of course,
> NVDA.
>
> The first post of In-Process is online now:
> http://www.nvaccess.org/category/in-process/
>
> Kind regards
>
> Quentin.
>
> --
> Quentin Christensen
> Training Material Developer
> Basic Training for NVDA & Microsoft Word with NVDA E-Books now available:
> http://www.nvaccess.org/shop/
>
> Ph +61 7 3149 3306<tel:%2B61%207%203149%203306>
> www.nvaccess.org<http://www.nvaccess.org/>
> Facebook: http://www.facebook.com/NVAccess
> Twitter: @NVAccess
>
>
>
> --
> <b>Check out the new location of my accessibility central website for NVDA
> tutorials, NVDA road tested programs, and other eyesight related topics.
> http://www.accessibilitycentral.net/ If you would like to keep up to date
> with whats being updated on our website, you can also follow us on facebook
> by visiting
> the following link
> https://en-gb.facebook.com/people/AccessibilityCentral-Net/100009727930216
> Also, check out which New Zealand libraries have the NVDA screen reader
> available by visiting the following link
> http://www.aotearoapeoplesnetwork.org/content/partner-libraries
>


--
we have not sent you but as a mercy to the creation.
holy quran, chapter 21, verse 107.
in the very authentic narration is:
imam hosein is the beacon of light and the ark of salvation.
best website for studying islamic book in different languages
al-islam.org






--
Quentin Christensen
Training Material Developer
Basic Training for NVDA & Microsoft Word with NVDA E-Books now available: http://www.nvaccess.org/shop/

www.nvaccess.org 
Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


-- 
<b>Check out the new location of my accessibility central website for NVDA tutorials, NVDA road tested programs, and other eyesight related topics.
http://www.accessibilitycentral.net/ If you would like to keep up to date with whats being updated on our website, you can also follow us on facebook by visiting
the following link https://en-gb.facebook.com/people/AccessibilityCentral-Net/100009727930216
Also, check out which New Zealand libraries have the NVDA screen reader available by visiting the following link http://www.aotearoapeoplesnetwork.org/content/partner-libraries




--
Quentin Christensen
Training Material Developer
Basic Training for NVDA & Microsoft Word with NVDA E-Books now available: http://www.nvaccess.org/shop/

www.nvaccess.org 
Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


Re: Keep up with NV Access through "In-Process", our new blog

Ben J. Bloomgren
 

Hello, quentin,


I saw a feed called In Process category feed. The RSS address is http://www.nvaccess.org/category/in-process/feed/


Is this a good feed to use to keep in touch with In Process?


Ben


On 1/26/2017 22:48, Gene New Zealand wrote:

Hi Quentin

Thanks for letting me know that. What I might do then, is leave the link to the podcast page, remove my how to make Libre Office and Open Office accessible page (since both of these are now accessible), and add in a link to the new In Process page to all the NVDA related pages!

Regards,

Gene NZ


On 21/01/2017 4:42 PM, Quentin Christensen wrote:
Hi everyone,

Thanks for all the positive feedback on the new blog!  Thanks also Bhavya for sharing the announcement a bit wider too.

Hank, did you want the address for the In-Process blog?  It's here: http://www.nvaccess.org/category/in-process/

The main NV Access website is unchanged, it's still http://www.nvaccess.org/

Gene, re the podcast, we've talked about reviving that, but started the blog back up again first.

Kind regards

Quentin.

On Fri, Jan 20, 2017 at 8:42 PM, nasrin khaksar <nasrinkhaksar3@...> wrote:
hi quentin.
i realy appreciate the link.
i studied it and it was very great.
specially, for me because i realy wish that know whats new in newer
version of nvda prior to its release!
thanks extremely for your great work and God bless you.

On 1/20/17, Gene New Zealand <hurrikennyandopo@....nz> wrote:
> Hi Quentin.
>
>
> I just read the first post that was sent to the list. it is good to see the
> blog part come back, they used to do it along time ago. I enjoyed reading
> what was happening. A quick question will the podcast side of it come back?
> I just looked and the last official one was a year ago with some of the
> community doing them for others to see what was in each release
>
>
> if the podcast part is not to come back I will redirect the links from the
> podcast page to the blog that will be coming out from now on.
>
> That will be on my pages that have nvda tutorials on them.
>
>
> It will be good so more people know about the blog.
>
>
> Gene nz
>
>
> .
>
> On 20/01/2017 6:31 PM, Quentin Christensen wrote:
> Hi everyone,
>
> NV Access has a new blog called "In-Process".  We will keep you up to date
> with the week to week happenings from the organisation, staff and of course,
> NVDA.
>
> The first post of In-Process is online now:
> http://www.nvaccess.org/category/in-process/
>
> Kind regards
>
> Quentin.
>
> --
> Quentin Christensen
> Training Material Developer
> Basic Training for NVDA & Microsoft Word with NVDA E-Books now available:
> http://www.nvaccess.org/shop/
>
> Ph +61 7 3149 3306<tel:%2B61%207%203149%203306>
> www.nvaccess.org<http://www.nvaccess.org/>
> Facebook: http://www.facebook.com/NVAccess
> Twitter: @NVAccess
>
>
>
> --
> <b>Check out the new location of my accessibility central website for NVDA
> tutorials, NVDA road tested programs, and other eyesight related topics.
> http://www.accessibilitycentral.net/ If you would like to keep up to date
> with whats being updated on our website, you can also follow us on facebook
> by visiting
> the following link
> https://en-gb.facebook.com/people/AccessibilityCentral-Net/100009727930216
> Also, check out which New Zealand libraries have the NVDA screen reader
> available by visiting the following link
> http://www.aotearoapeoplesnetwork.org/content/partner-libraries
>


--
we have not sent you but as a mercy to the creation.
holy quran, chapter 21, verse 107.
in the very authentic narration is:
imam hosein is the beacon of light and the ark of salvation.
best website for studying islamic book in different languages
al-islam.org






--
Quentin Christensen
Training Material Developer
Basic Training for NVDA & Microsoft Word with NVDA E-Books now available: http://www.nvaccess.org/shop/

www.nvaccess.org 
Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


-- 
<b>Check out the new location of my accessibility central website for NVDA tutorials, NVDA road tested programs, and other eyesight related topics.
http://www.accessibilitycentral.net/ If you would like to keep up to date with whats being updated on our website, you can also follow us on facebook by visiting
the following link https://en-gb.facebook.com/people/AccessibilityCentral-Net/100009727930216
Also, check out which New Zealand libraries have the NVDA screen reader available by visiting the following link http://www.aotearoapeoplesnetwork.org/content/partner-libraries


Re: Problem

Gene
 

You may have to solve the problem by using a cheap USB sound card or by using USB headphones. 
 
Gene

----- Original Message -----
From: Sakina
Sent: Friday, January 27, 2017 12:14 PM
Subject: [nvda] Problem

Hello friends,

 

A friend has given me his old laptop which he does not use any more. I am happy using it as it has got word 2007 instead of 2003 which I had. I use the ordinary head phones inorder not to disturb any one around me.

Works well but all of a sudden the sound stops coming out of the headphone and the sound comes from the laptop itself.

I do not know why that is happening as the headphones are still attached .

I shut the laptop down and restart all over again. Then again it would do the same thing as above after half an hour or so.   I prefer to listen through ear phones only all the time and wish to cure this problem.

Please I will gratefully receive any advise. Please also I am not very technically minded and the guidance in simple way will be very helpful.

Thank you all and with best wishes

Sakina




Avast logo

This email has been checked for viruses by Avast antivirus software.
www.avast.com



Problem

Sakina
 

Hello friends,

 

A friend has given me his old laptop which he does not use any more. I am happy using it as it has got word 2007 instead of 2003 which I had. I use the ordinary head phones inorder not to disturb any one around me.

Works well but all of a sudden the sound stops coming out of the headphone and the sound comes from the laptop itself.

I do not know why that is happening as the headphones are still attached .

I shut the laptop down and restart all over again. Then again it would do the same thing as above after half an hour or so.   I prefer to listen through ear phones only all the time and wish to cure this problem.

Please I will gratefully receive any advise. Please also I am not very technically minded and the guidance in simple way will be very helpful.

Thank you all and with best wishes

Sakina




Avast logo

This email has been checked for viruses by Avast antivirus software.
www.avast.com