Date   

Re: trouble downloading add on

Gary Metzler <gmtravel@...>
 

       
 

From: Gene New Zealand
Sent: Saturday, October 8, 2016 2:26 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] trouble downloading add on
 
hi

That is good that you got them add ons installed.

If you are interested i have put together a blindness related website with both written and audio tutorials for the nvda screen reader.

They were done through the different version of nvda starting from i think 2012 and onwards. They are for the desk top for the commands and not done for a lap top unless it has a 101 keyboard.

The blindness related material plus the tutorials can be found at http://www.accessibilitycentral.net
they are the pages that relate to the nvda screen reader.

hope this helps learning different things with nvda.

They are also done step by step from a user, so they are easy to follow.

Gene nz
On 8/10/2016 9:52 PM, Gary Metzler wrote:
Hi Gene,
 
With some trial and error I finally got the add ons installed.  Thanks for your help.
 
From: Gary Metzler
Sent: Friday, October 7, 2016 8:17 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] trouble downloading add on
 
Hi Gene,
 
I’m sorry I didn’t reply sooner.  I was hit with hurricane Mathew and had to go to my sisters house. 
I just can’t seem to get the ocr and place marker files downloaded.  I did as you suggested but, still no luck.
 
From: Gene New Zealand
Sent: Wednesday, October 5, 2016 2:58 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] trouble downloading add on
 

Hi

 

Is that from off the main add on page? that is where the add ons are but link to another page where the add on is. You will need to go to that page to get it.

 

There will be a stable version of it as well as a developers version.

 

Depending which browser you are using you could try any of the following.

 

While on the link you can use the letter K to jump down to the stable version then either press the enter key on it. It then might give you the option to open or save it. in most cases you would save it to some where easy to locate it on your pc. for example desktop. Then you would locate the add on press the enter key on it and say yes to it 2 times to install it.

 

Or the other way is while on the link, use the context key in either internet exploder or mozilla fire fox arrow down to either save target as in internet exploder or save link as in mozilla fire fox thenpress the enter key.

The dialogue box will come up so you can save the add on to your pc. Make sure you note where you are saving the add on to. for example the desk top, then locate it after it is on the desktop then press the enter key on it to install it.

say yes to it 2 times for it to be installed.

 

hope this helps.

 

Gene nz

 


On 6/10/2016 7:02 AM, Gary Metzler wrote:
Hi All,
 
I am trying to download a few add ons one is the ocr and the other is the place marker.  I go to the add on manager and tab to get add on I then go to the one I want and hit enter.  It doesn’t get downloaded.  What can I be doing wrong?  Thanks for any help.  Regards, Gary kn4ox

-- 
Check out my website for nvda tutorials and other blindness related material at http://www.accessibilitycentral.net

-- 
Check out my website for nvda tutorials and other blindness related material at http://www.accessibilitycentral.net


Re: trouble downloading add on

Arlene
 

Well that’s great! Now you can get back to business on this list.

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gary Metzler
Sent: October-08-16 12:25 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] trouble downloading add on

 

Hi Arlene,

 

Thank you for your kind words.  We didn’t get hit as hard as the news said.  All is well in my corner of the world.

 

From: Arlene

Sent: Friday, October 7, 2016 11:15 PM

Subject: Re: [nvda] trouble downloading add on

 

Oh no! Is everything okay? I seen this on my Canadian news.  I’m glad you went to your sister’s house for some time.  I know this is not a chat list. Sorry you were hit with Hurricane Matthew. 

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gary Metzler
Sent: October-07-16 5:17 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] trouble downloading add on

 

Hi Gene,

 

I’m sorry I didn’t reply sooner.  I was hit with hurricane Mathew and had to go to my sisters house. 

I just can’t seem to get the ocr and place marker files downloaded.  I did as you suggested but, still no luck.

 

From: Gene New Zealand

Sent: Wednesday, October 5, 2016 2:58 PM

Subject: Re: [nvda] trouble downloading add on

 

Hi

 

Is that from off the main add on page? that is where the add ons are but link to another page where the add on is. You will need to go to that page to get it.

 

There will be a stable version of it as well as a developers version.

 

Depending which browser you are using you could try any of the following.

 

While on the link you can use the letter K to jump down to the stable version then either press the enter key on it. It then might give you the option to open or save it. in most cases you would save it to some where easy to locate it on your pc. for example desktop. Then you would locate the add on press the enter key on it and say yes to it 2 times to install it.

 

Or the other way is while on the link, use the context key in either internet exploder or mozilla fire fox arrow down to either save target as in internet exploder or save link as in mozilla fire fox thenpress the enter key.

The dialogue box will come up so you can save the add on to your pc. Make sure you note where you are saving the add on to. for example the desk top, then locate it after it is on the desktop then press the enter key on it to install it.

say yes to it 2 times for it to be installed.

 

hope this helps.

 

Gene nz

 

 

On 6/10/2016 7:02 AM, Gary Metzler wrote:

Hi All,

 

I am trying to download a few add ons one is the ocr and the other is the place marker.  I go to the add on manager and tab to get add on I then go to the one I want and hit enter.  It doesn’t get downloaded.  What can I be doing wrong?  Thanks for any help.  Regards, Gary kn4ox

 

-- 
Check out my website for nvda tutorials and other blindness related material at http://www.accessibilitycentral.net


got locked out of my gmail account in firefox

Rosemarie Chavarria
 

Hi, everyone,


How do I find my gmail account in firefox? I got locked out. What I want to do si practice using the online gmail site. I just listened to the tutorial on gmail and it's great but now I'm locked out of my account.


Thanks for your help in advance.


Rosemarie


Re: accessibility of "Free Commander"

Kevin Cussick
 

hi, thanks for the link nothing really that I would need here thanks anyway.

On 08/10/2016 20:56, Antony Stone wrote:
Google suggested https://freecommander.com/en/summary/ to me.

Antony.

On Saturday 08 October 2016 at 21:53:20, Kevin Cussick via Groups.io wrote:

Ok, what does it offer that window's explorer doesn'? any chance of
a website I can google if not.

On 08/10/2016 17:52, Bryan Mckinnish wrote:
Hi.
Free commander is accessible.
I have it on my machine.
From what I've used of it, it seems accessible.

On 10/8/2016 12:03 PM, Dan Beaver wrote:
Hi,

Does anyone know if free commander is accessible with NVDA or not? It
sounds interesting and I'd like to try it but if it isn't accessible
then I'm not going to waste my time.

thanks.

Dan Beaver


Re: accessibility of "Free Commander"

Kevin Cussick
 

Hi, OK not really but thanks are there any things that it can do that the normal explorer built into windows does not do? I can't really think of any features but if there are you might be able to tell me? if not no problem thanks in advance.

On 08/10/2016 21:00, Carlos wrote:
Hello:

FreeCommander is a Norton Commander file manager clone.

Norton Commander was one of the first DOS file managers and is still
cloned by software developers because of its long lasting popularity!

Hope this helps you out!



On 10/8/2016 12:53 PM, Kevin Cussick via Groups.io wrote:
Ok, what does it offer that window's explorer doesn'? any chance of
a website I can google if not.

On 08/10/2016 17:52, Bryan Mckinnish wrote:
Hi.
Free commander is accessible.
I have it on my machine.
From what I've used of it, it seems accessible.

On 10/8/2016 12:03 PM, Dan Beaver wrote:
Hi,


Does anyone know if free commander is accessible with NVDA or not? It
sounds interesting and I'd like to try it but if it isn't accessible
then I'm not going to waste my time.


thanks.


Dan Beaver




.




Re: accessibility of "Free Commander"

Kevin Cussick
 

Ok, thanks will take a look.

On 08/10/2016 20:56, Antony Stone wrote:
Google suggested https://freecommander.com/en/summary/ to me.

Antony.

On Saturday 08 October 2016 at 21:53:20, Kevin Cussick via Groups.io wrote:

Ok, what does it offer that window's explorer doesn'? any chance of
a website I can google if not.

On 08/10/2016 17:52, Bryan Mckinnish wrote:
Hi.
Free commander is accessible.
I have it on my machine.
From what I've used of it, it seems accessible.

On 10/8/2016 12:03 PM, Dan Beaver wrote:
Hi,

Does anyone know if free commander is accessible with NVDA or not? It
sounds interesting and I'd like to try it but if it isn't accessible
then I'm not going to waste my time.

thanks.

Dan Beaver


Re: accessibility of "Free Commander"

Carlos
 

Hello:

FreeCommander is a Norton Commander file manager clone.

Norton Commander was one of the first DOS file managers and is still cloned by software developers because of its long lasting popularity!

Hope this helps you out!

On 10/8/2016 12:53 PM, Kevin Cussick via Groups.io wrote:
Ok, what does it offer that window's explorer doesn'? any chance of a website I can google if not.

On 08/10/2016 17:52, Bryan Mckinnish wrote:
Hi.
Free commander is accessible.
I have it on my machine.
From what I've used of it, it seems accessible.

On 10/8/2016 12:03 PM, Dan Beaver wrote:
Hi,


Does anyone know if free commander is accessible with NVDA or not? It
sounds interesting and I'd like to try it but if it isn't accessible
then I'm not going to waste my time.


thanks.


Dan Beaver




.


--
Carlos Gonzalez - Los Angeles, CA. - gmjc341961@...


Re: accessibility of "Free Commander"

Antony Stone
 

Google suggested https://freecommander.com/en/summary/ to me.

Antony.

On Saturday 08 October 2016 at 21:53:20, Kevin Cussick via Groups.io wrote:

Ok, what does it offer that window's explorer doesn'? any chance of
a website I can google if not.

On 08/10/2016 17:52, Bryan Mckinnish wrote:
Hi.
Free commander is accessible.
I have it on my machine.
From what I've used of it, it seems accessible.

On 10/8/2016 12:03 PM, Dan Beaver wrote:
Hi,

Does anyone know if free commander is accessible with NVDA or not? It
sounds interesting and I'd like to try it but if it isn't accessible
then I'm not going to waste my time.

thanks.

Dan Beaver
--
Pavlov is in the pub enjoying a pint.
The barman rings for last orders, and Pavlov jumps up exclaiming "Damn! I
forgot to feed the dog!"

Please reply to the list;
please *don't* CC me.


Re: accessibility of "Free Commander"

Kevin Cussick
 

Ok, what does it offer that window's explorer doesn'? any chance of a website I can google if not.

On 08/10/2016 17:52, Bryan Mckinnish wrote:
Hi.
Free commander is accessible.
I have it on my machine.
From what I've used of it, it seems accessible.

On 10/8/2016 12:03 PM, Dan Beaver wrote:
Hi,


Does anyone know if free commander is accessible with NVDA or not? It
sounds interesting and I'd like to try it but if it isn't accessible
then I'm not going to waste my time.


thanks.


Dan Beaver




.


Re: creating a profile

Gene
 

The instructions and the previous discussion bring up a point that should be considered, in my opinion as an added NVDA feature.  As of now, as far as I know, profiles can only be set to be changed to when a program opens.  But what about times when you want a profile to be used only when a certain part of a program is opened?  In the present example, only when a message is opened.  This may not be appropriate to be added as a means of tailoring behavior using profiles.  But however it is done, it is a part of what has been asked for in the past, a way to tailor NVDA''s behavior the way you can with JAWS or Window-eyes using frames or set files, respectively. 
 
Gene

----- Original Message -----
Sent: Saturday, October 08, 2016 1:42 PM
Subject: Re: [nvda] creating a profile

Hi


The below written stuff might give you a idea of what to do.


Except instead of the application that was used you would use the one you mentioned. So you would have to go into the program as mentioned in the first part of the tutorial and the second part you would make your changes such as use the say all command. I actually when i write this was triggered when you went into the application to do it


I would use the say all command i know on the desk top is the nvda key + the down arrow key.

Actually there is a audio tutorial on the nvda audio tutorial page on how to make a profile or 4 there as well.

The written stuff is below and may need to be tidied up.

Creating a configuration profile with NVDA

 

Has there ever been a time When you have wanted NVDA to speak formatting in a word document such as Microsoft word, but not in another document such as a HTML page on the web. Would you like NVDA to read in one voice on a webpage and another voice in a document. By setting up different configuration profiles in NVDA this can be done and customized to your liking with a profile. You will need to setup a profile for each application you want to do it to.

 

The profile will be triggered when you go into that application with your settings you had tailored for that profile. So no matter what other application you may go into when you come back to the one you had set up, when it is opened it will be automatically triggered.

 

 

If you are setting up a application profile such as Microsoft word, you will need to go into that application first. For example Microsoft Word

 

While NVDA is running, press the NVDA key + the CTRL key + the letter PThis will bring up the configuration profiles menu.

 

NVDA will default to the normal configuration profile. This is the profile or settings you have at present.

 

Next tab to the new button, then press the enter key. NVDA will say profile name. Here type in the name for that profile. For example Microsoft word with formatting. Once typed, tab once and then you will hear NVDA say use this profile for  grouping manual activation radio button checked. When you hear this arrow down until you hear NVDA say current application . For example winword radio button checked. Next tab to the ok button then press the enter key. While you are still in the application make sure it is in focus, press the NVDA key + the CTRL key + the letter P again. This will bring back up your configuration profiles menu. Locate your profile. For example Microsoft word with formatting. Next tab until you hear NVDA say triggers, then press the enter key. You will hear NVDA say . for example current application winword

Make all of your changes you want to make in that application. For example turn on all the formatting you want to hear, pick your voice you want to use and so on. You can alt/tab to the application so it is in front of you then make changes with NVDA. If you would like to change any of the reporting of formatting you want to hear go into the document formatting section in NVDA and make your changes. Do the same if you want to change synthsisers or voices and so on and tailor NVDA to your liking in that profile. Make sure you save your changes if you are happy with them with the CTRL key +the NVDA key + the letter C You might want to say your changes in steps for that profile.

 

When you are happy with the new profile you have setup, tab once and you will hear NVDA say profile combo box Microsoft word with formatting. Tab to the close button then press the enter key.  This will put you back into the configuration profiles menu in NVDA. You might hear NVDA say profile list Microsoft word with formatting editing triggered. Next tab to the close button then press the enter key. Your configuration will now be saved.

 

To set up other application pacific profiles go into what ever application it is and repeat the steps mentioned above, but setup a new profile each time for the new application.

 

Deleting out your profile

 

Press the CTRL key + NVDA key + the letter P this will bring up the configuration profiles menu in NVDA.  NVDA will land on the configuration profiles dialogue  profile list. Locate the profile you want to delete with the down or up arrow keys. For example Microsoft Word with formatting profile

 

Next tab to the delete button then press the enter key. NVDA will ask you if you want to delete  that profile. It will tell you it can not be undone. Tab to the yes button, then press the enter key.Next tab to the close button, then press the entr key and it will be gone.

For more information on Configuration profiles please see the section named Configuration profiles in the user manual.

 

When this was written it was for what most people might do.


There is also a setting so when you go into the application one of the triggers instead of the application can be the say all command. I have not used it.



 

 

  



Gene nz

On 8/10/2016 11:10 PM, Gary Metzler wrote:
Hi All,
 
Since I am new to nvda I would like to know if it is possible to create a profile for windows live mail to read the entire message upon opening it?  If so, how is this done?  Thanks for any help.Regards, Gary kn4ox

-- 
Check out my website for nvda tutorials and other blindness related material at http://www.accessibilitycentral.net


Re: creating a profile

Kenny Dog <hurrikennyandopo@...>
 

Hi


The below written stuff might give you a idea of what to do.


Except instead of the application that was used you would use the one you mentioned. So you would have to go into the program as mentioned in the first part of the tutorial and the second part you would make your changes such as use the say all command. I actually when i write this was triggered when you went into the application to do it


I would use the say all command i know on the desk top is the nvda key + the down arrow key.

Actually there is a audio tutorial on the nvda audio tutorial page on how to make a profile or 4 there as well.

The written stuff is below and may need to be tidied up.

Creating a configuration profile with NVDA

 

Has there ever been a time When you have wanted NVDA to speak formatting in a word document such as Microsoft word, but not in another document such as a HTML page on the web. Would you like NVDA to read in one voice on a webpage and another voice in a document. By setting up different configuration profiles in NVDA this can be done and customized to your liking with a profile. You will need to setup a profile for each application you want to do it to.

 

The profile will be triggered when you go into that application with your settings you had tailored for that profile. So no matter what other application you may go into when you come back to the one you had set up, when it is opened it will be automatically triggered.

 

 

If you are setting up a application profile such as Microsoft word, you will need to go into that application first. For example Microsoft Word

 

While NVDA is running, press the NVDA key + the CTRL key + the letter PThis will bring up the configuration profiles menu.

 

NVDA will default to the normal configuration profile. This is the profile or settings you have at present.

 

Next tab to the new button, then press the enter key. NVDA will say profile name. Here type in the name for that profile. For example Microsoft word with formatting. Once typed, tab once and then you will hear NVDA say use this profile for  grouping manual activation radio button checked. When you hear this arrow down until you hear NVDA say current application . For example winword radio button checked. Next tab to the ok button then press the enter key. While you are still in the application make sure it is in focus, press the NVDA key + the CTRL key + the letter P again. This will bring back up your configuration profiles menu. Locate your profile. For example Microsoft word with formatting. Next tab until you hear NVDA say triggers, then press the enter key. You will hear NVDA say . for example current application winword

Make all of your changes you want to make in that application. For example turn on all the formatting you want to hear, pick your voice you want to use and so on. You can alt/tab to the application so it is in front of you then make changes with NVDA. If you would like to change any of the reporting of formatting you want to hear go into the document formatting section in NVDA and make your changes. Do the same if you want to change synthsisers or voices and so on and tailor NVDA to your liking in that profile. Make sure you save your changes if you are happy with them with the CTRL key +the NVDA key + the letter C You might want to say your changes in steps for that profile.

 

When you are happy with the new profile you have setup, tab once and you will hear NVDA say profile combo box Microsoft word with formatting. Tab to the close button then press the enter key.  This will put you back into the configuration profiles menu in NVDA. You might hear NVDA say profile list Microsoft word with formatting editing triggered. Next tab to the close button then press the enter key. Your configuration will now be saved.

 

To set up other application pacific profiles go into what ever application it is and repeat the steps mentioned above, but setup a new profile each time for the new application.

 

Deleting out your profile

 

Press the CTRL key + NVDA key + the letter P this will bring up the configuration profiles menu in NVDA.  NVDA will land on the configuration profiles dialogue  profile list. Locate the profile you want to delete with the down or up arrow keys. For example Microsoft Word with formatting profile

 

Next tab to the delete button then press the enter key. NVDA will ask you if you want to delete  that profile. It will tell you it can not be undone. Tab to the yes button, then press the enter key.Next tab to the close button, then press the entr key and it will be gone.

For more information on Configuration profiles please see the section named Configuration profiles in the user manual.

 

When this was written it was for what most people might do.


There is also a setting so when you go into the application one of the triggers instead of the application can be the say all command. I have not used it.



 

 

  



Gene nz

On 8/10/2016 11:10 PM, Gary Metzler wrote:
Hi All,
 
Since I am new to nvda I would like to know if it is possible to create a profile for windows live mail to read the entire message upon opening it?  If so, how is this done?  Thanks for any help.Regards, Gary kn4ox

-- 
Check out my website for nvda tutorials and other blindness related material at http://www.accessibilitycentral.net


Re: adding a contact in wlm

Rosemarie Chavarria
 

Hi, Gary,


I'm glad it worked. It works like that in thunderbird.


Rosemarie




On 10/8/2016 10:06 AM, Gary Metzler wrote:
Hi Rosemary,
 
I just tried your suggestion and it worked like a charm.  I added you to my address book.  Thanks again for your help.
 
From: Rosemarie Chavarria
Sent: Saturday, October 8, 2016 12:55 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] adding a contact in wlm
 

Hi, Gary,

 

If I remember correctly, you tab to where it says "add to address book" in windows live mail and either hit enter or the space bar. This is done while the message is open.

 

Hope this helps.

 

Rosemarie

 

 


On 10/8/2016 9:51 AM, Gary Metzler wrote:
Hi All,
 
How do you add a contact from an e mail message using wlm?  Thanks for any help.Regards, Gary kn4ox



Re: trouble downloading add on

Kenny Dog <hurrikennyandopo@...>
 

hi

That is good that you got them add ons installed.

If you are interested i have put together a blindness related website with both written and audio tutorials for the nvda screen reader.

They were done through the different version of nvda starting from i think 2012 and onwards. They are for the desk top for the commands and not done for a lap top unless it has a 101 keyboard.

The blindness related material plus the tutorials can be found at http://www.accessibilitycentral.net
they are the pages that relate to the nvda screen reader.

hope this helps learning different things with nvda.

They are also done step by step from a user, so they are easy to follow.

Gene nz
On 8/10/2016 9:52 PM, Gary Metzler wrote:
Hi Gene,
 
With some trial and error I finally got the add ons installed.  Thanks for your help.
 
From: Gary Metzler
Sent: Friday, October 7, 2016 8:17 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] trouble downloading add on
 
Hi Gene,
 
I’m sorry I didn’t reply sooner.  I was hit with hurricane Mathew and had to go to my sisters house. 
I just can’t seem to get the ocr and place marker files downloaded.  I did as you suggested but, still no luck.
 
From: Gene New Zealand
Sent: Wednesday, October 5, 2016 2:58 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] trouble downloading add on
 

Hi

 

Is that from off the main add on page? that is where the add ons are but link to another page where the add on is. You will need to go to that page to get it.

 

There will be a stable version of it as well as a developers version.

 

Depending which browser you are using you could try any of the following.

 

While on the link you can use the letter K to jump down to the stable version then either press the enter key on it. It then might give you the option to open or save it. in most cases you would save it to some where easy to locate it on your pc. for example desktop. Then you would locate the add on press the enter key on it and say yes to it 2 times to install it.

 

Or the other way is while on the link, use the context key in either internet exploder or mozilla fire fox arrow down to either save target as in internet exploder or save link as in mozilla fire fox thenpress the enter key.

The dialogue box will come up so you can save the add on to your pc. Make sure you note where you are saving the add on to. for example the desk top, then locate it after it is on the desktop then press the enter key on it to install it.

say yes to it 2 times for it to be installed.

 

hope this helps.

 

Gene nz

 


On 6/10/2016 7:02 AM, Gary Metzler wrote:
Hi All,
 
I am trying to download a few add ons one is the ocr and the other is the place marker.  I go to the add on manager and tab to get add on I then go to the one I want and hit enter.  It doesn’t get downloaded.  What can I be doing wrong?  Thanks for any help.  Regards, Gary kn4ox

-- 
Check out my website for nvda tutorials and other blindness related material at http://www.accessibilitycentral.net

-- 
Check out my website for nvda tutorials and other blindness related material at http://www.accessibilitycentral.net


Re: nvda remote unofficial servers

Salva Doménech <kibayasd@...>
 

Hi.
technow.es
Madrid (Spain)

fictionfantasia.es
France (OVH's VPS)


-----Mensaje original-----
De: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] En nombre de Engin Albayrak
Enviado el: sábado, 08 de octubre de 2016 20:04
Para: nvda@nvda.groups.io
Asunto: YNT: [nvda] nvda remote unofficial servers


NVRA.ME

Iowa



IL.NVRA.ME

Illinois



TX.NVRA.ME

Texas



WA.NVRA.ME

Washington



CA.NVRA.ME

California



NY.NVRA.ME

New York



VA.NVRA.ME

Virginia



VA2.NVRA.ME

Virginia, Alternative



UK.NVRA.ME

London (Andre Louis)



UK2.NVRA.ME

London, alternative (Andre Louis)



IE.NVRA.ME

İrlanda



NL.NVRA.ME

Hollanda



HK.NVRA.ME

Hong Kong



SG.NVRA.ME

Singapur



BR.NVRA.ME

Brezilya



-----Özgün İleti-----
Kimden: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] Yerine kavein thran
Tarih: 8 Ekim 2016 Cumartesi 11:40
Kime: nvda@nvda.groups.io
Konu: Re: [nvda] nvda remote unofficial servers

this one is not working

On 4/1/16, Patrick ZAJDA <patrick@...> wrote:
Hi,

You said:
all info is under the getting in touch heading on the nvra.me
So the e-mail address is so protected against bots that I cannot
understand it ;) I'l try anyway.

Thanks.

Shaun Everiss:
all info is under the getting in touch heading on the nvra.me I found
this on the freakyfwoof twitter but its on the tidbits
topdotenterprises.com magazine also.



On 31/03/2016 11:05 p.m., Patrick ZAJDA wrote:
Hi Shaun and all,

First of all, thank you very much for this information! I didn't
know that, on which twitter did you read it?
And how this server (for the code) is affiliated to NVDARemote creators?
Last question: I set up a server, but I don't find the e-mail
address to contact, what e-mail address is it?

Thanks!

Patrick

Shaun Everiss:
Hi.
well I just read this on twitter but there are some unofficial
remote servers.
nvdaremote.com is the main server.
nvra.me is the server list there are 16 servers and could be room
for more they want to put servers world wide eventually.



--
Patrick ZAJDA




Re: YNT: [nvda] nvda remote unofficial servers

David Goldfield
 

Interesting. Who is running these servers?

David Goldfield,
Assistive Technology Specialist

Feel free to visit my Web site
WWW.DavidGoldfield.Info

On 10/8/2016 2:03 PM, Engin Albayrak wrote:
NVRA.ME

Iowa



IL.NVRA.ME

Illinois



TX.NVRA.ME

Texas



WA.NVRA.ME

Washington



CA.NVRA.ME

California



NY.NVRA.ME

New York



VA.NVRA.ME

Virginia



VA2.NVRA.ME

Virginia, Alternative



UK.NVRA.ME

London (Andre Louis)



UK2.NVRA.ME

London, alternative (Andre Louis)



IE.NVRA.ME

İrlanda



NL.NVRA.ME

Hollanda



HK.NVRA.ME

Hong Kong



SG.NVRA.ME

Singapur



BR.NVRA.ME

Brezilya



-----Özgün İleti-----
Kimden: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] Yerine kavein thran
Tarih: 8 Ekim 2016 Cumartesi 11:40
Kime: nvda@nvda.groups.io
Konu: Re: [nvda] nvda remote unofficial servers

this one is not working

On 4/1/16, Patrick ZAJDA <patrick@...> wrote:
Hi,

You said:
all info is under the getting in touch heading on the nvra.me
So the e-mail address is so protected against bots that I cannot
understand it ;) I'l try anyway.

Thanks.

Shaun Everiss:
all info is under the getting in touch heading on the nvra.me I found
this on the freakyfwoof twitter but its on the tidbits
topdotenterprises.com magazine also.



On 31/03/2016 11:05 p.m., Patrick ZAJDA wrote:
Hi Shaun and all,

First of all, thank you very much for this information! I didn't
know that, on which twitter did you read it?
And how this server (for the code) is affiliated to NVDARemote creators?
Last question: I set up a server, but I don't find the e-mail
address to contact, what e-mail address is it?

Thanks!

Patrick

Shaun Everiss:
Hi.
well I just read this on twitter but there are some unofficial
remote servers.
nvdaremote.com is the main server.
nvra.me is the server list there are 16 servers and could be room
for more they want to put servers world wide eventually.


--
Patrick ZAJDA









Re: nvda remote unofficial servers

David Mehler
 

Hello,

Possibly a stupid question, how does one set up your own NVDA remote server?

Thanks.
Dave.

On 10/8/16, Engin Albayrak <@mealbayrak> wrote:

NVRA.ME

Iowa



IL.NVRA.ME

Illinois



TX.NVRA.ME

Texas



WA.NVRA.ME

Washington



CA.NVRA.ME

California



NY.NVRA.ME

New York



VA.NVRA.ME

Virginia



VA2.NVRA.ME

Virginia, Alternative



UK.NVRA.ME

London (Andre Louis)



UK2.NVRA.ME

London, alternative (Andre Louis)



IE.NVRA.ME

İrlanda



NL.NVRA.ME

Hollanda



HK.NVRA.ME

Hong Kong



SG.NVRA.ME

Singapur



BR.NVRA.ME

Brezilya



-----Özgün İleti-----
Kimden: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] Yerine kavein
thran
Tarih: 8 Ekim 2016 Cumartesi 11:40
Kime: nvda@nvda.groups.io
Konu: Re: [nvda] nvda remote unofficial servers

this one is not working

On 4/1/16, Patrick ZAJDA <patrick@...> wrote:
Hi,

You said:
all info is under the getting in touch heading on the nvra.me
So the e-mail address is so protected against bots that I cannot
understand it ;) I'l try anyway.

Thanks.

Shaun Everiss:
all info is under the getting in touch heading on the nvra.me I found
this on the freakyfwoof twitter but its on the tidbits
topdotenterprises.com magazine also.



On 31/03/2016 11:05 p.m., Patrick ZAJDA wrote:
Hi Shaun and all,

First of all, thank you very much for this information! I didn't
know that, on which twitter did you read it?
And how this server (for the code) is affiliated to NVDARemote
creators?
Last question: I set up a server, but I don't find the e-mail
address to contact, what e-mail address is it?

Thanks!

Patrick

Shaun Everiss:
Hi.
well I just read this on twitter but there are some unofficial
remote servers.
nvdaremote.com is the main server.
nvra.me is the server list there are 16 servers and could be room
for more they want to put servers world wide eventually.



--
Patrick ZAJDA











YNT: [nvda] nvda remote unofficial servers

Engin Albayrak <mealbayrak@...>
 

NVRA.ME

Iowa



IL.NVRA.ME

Illinois



TX.NVRA.ME

Texas



WA.NVRA.ME

Washington



CA.NVRA.ME

California



NY.NVRA.ME

New York



VA.NVRA.ME

Virginia



VA2.NVRA.ME

Virginia, Alternative



UK.NVRA.ME

London (Andre Louis)



UK2.NVRA.ME

London, alternative (Andre Louis)



IE.NVRA.ME

İrlanda



NL.NVRA.ME

Hollanda



HK.NVRA.ME

Hong Kong



SG.NVRA.ME

Singapur



BR.NVRA.ME

Brezilya



-----Özgün İleti-----
Kimden: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] Yerine kavein thran
Tarih: 8 Ekim 2016 Cumartesi 11:40
Kime: nvda@nvda.groups.io
Konu: Re: [nvda] nvda remote unofficial servers

this one is not working

On 4/1/16, Patrick ZAJDA <patrick@...> wrote:
Hi,

You said:
all info is under the getting in touch heading on the nvra.me
So the e-mail address is so protected against bots that I cannot
understand it ;) I'l try anyway.

Thanks.

Shaun Everiss:
all info is under the getting in touch heading on the nvra.me I found
this on the freakyfwoof twitter but its on the tidbits
topdotenterprises.com magazine also.



On 31/03/2016 11:05 p.m., Patrick ZAJDA wrote:
Hi Shaun and all,

First of all, thank you very much for this information! I didn't
know that, on which twitter did you read it?
And how this server (for the code) is affiliated to NVDARemote creators?
Last question: I set up a server, but I don't find the e-mail
address to contact, what e-mail address is it?

Thanks!

Patrick

Shaun Everiss:
Hi.
well I just read this on twitter but there are some unofficial
remote servers.
nvdaremote.com is the main server.
nvra.me is the server list there are 16 servers and could be room
for more they want to put servers world wide eventually.



--
Patrick ZAJDA




Re: creating a profile

Gene
 

Main steps start on new lines.
Control n to open the NVDA menu. 
Down arrow to preferences and press enter.  it's a submenu. 
Down arrow to browse mode.  Press enter. Tab through the dialog. 
The setting is a check box.  If it isn't checked, press the space bar and then enter. 
 
If you change the setting and it works and you want to save the change, use the command control NVDA key c.

Gene
----- Original Message -----
Sent: Saturday, October 08, 2016 12:12 PM
Subject: Re: [nvda] creating a profile

Hi Gene,
 
Where would I find the browse mode settings?  Thanks for all your help.
 
From: Gene
Sent: Saturday, October 8, 2016 12:55 PM
Subject: Re: [nvda] creating a profile
 
I doubt this will help but In browse mode settings in NVDA, see if the setting that tells NVDA to read page automatically when page loads is checked.  It is by default but if it isn't checked, checking it may solve the problem.
 
Gene
 
From: Gary Metzler
Sent: Saturday, October 08, 2016 11:46 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] creating a profile
 
I am reading in html.
 
From: Gene
Sent: Saturday, October 8, 2016 12:15 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] creating a profile
 
I'm not sure.  I don't think you specified what e-mail program you are using.  Also, are you reading mail as plain text or as HTML. 
 
Gene
----- Original Message -----
From: Gary Metzler
Sent: Saturday, October 08, 2016 11:10 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] creating a profile
 
HI Gene,
 
When I opened this message it only read the first sentence.  Can this be changed?  Thanks,
 
From: Gene
Sent: Saturday, October 8, 2016 8:14 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] creating a profile
 
When I open an e-mail message, even though my messages are read automatically, I manually issue the read to end command before or at the moment reading starts.  I find this more efficient in starting reading faster and avoiding material I don't want read.  I have already heard the subject line.  If I tell the message to be read manually, this material is not spoken again and the message body starts to be read.  You may have to experiment to see how long to wait before issuing the command after opening a message. 
 
There are times when getting in the habit of manually issuing a command is superior to having something done automatically unless you know how to script a screen-reader to do exactly what you want it to do.  Issuing such a command will become automatic over time. 
 
Gene
 
From: Rui Fontes
Sent: Saturday, October 08, 2016 6:53 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] creating a profile
 
Sorry, but Windows Live Mail already does that...
And, a profil is only to set different configurations to an app or action...

What you want to achieve, if it is not already done, will need an
appmodule...

Rui


-----Mensagem Original-----
De: Gary Metzler
Data: 8 de outubro de 2016 11:10
Para: nvda@nvda.groups.io
Assunto: [nvda] creating a profile


Hi All,

Since I am new to nvda I would like to know if it is possible to create a
profile for windows live mail to read the entire message upon opening it?
If so, how is this done?  Thanks for any help.Regards, Gary kn4ox
 





Re: browse mode, Re: [nvda] creating a profile

Gary Metzler <gmtravel@...>
 

Hi John,

Thanks, this is very helpful.

-----Original Message-----
From: John Sanfilippo
Sent: Saturday, October 8, 2016 1:28 PM
To: nvda@nvda.groups.io
Subject: browse mode, Re: [nvda] creating a profile

NVDA n, p, b, should do it.

JS



On 10/8/16 13:21, Gary Metzler wrote:
Hi Gene,

I found the browse settings and the check box wasn’t checked. I checked
it and now the messages are read to the end. Thanks again.

*From:* Gene
*Sent:* Saturday, October 8, 2016 12:55 PM
*To:* nvda@nvda.groups.io
*Subject:* Re: [nvda] creating a profile

I doubt this will help but In browse mode settings in NVDA, see if the
setting that tells NVDA to read page automatically when page loads is
checked. It is by default but if it isn't checked, checking it may
solve the problem.

Gene

*From:* Gary Metzler
*Sent:* Saturday, October 08, 2016 11:46 AM
*To:* nvda@nvda.groups.io
*Subject:* Re: [nvda] creating a profile

I am reading in html.

*From:* Gene
*Sent:* Saturday, October 8, 2016 12:15 PM
*To:* nvda@nvda.groups.io
*Subject:* Re: [nvda] creating a profile

I'm not sure. I don't think you specified what e-mail program you are
using. Also, are you reading mail as plain text or as HTML.

Gene
----- Original Message -----
*From:* Gary Metzler
*Sent:* Saturday, October 08, 2016 11:10 AM
*To:* nvda@nvda.groups.io
*Subject:* Re: [nvda] creating a profile

HI Gene,

When I opened this message it only read the first sentence. Can this be
changed? Thanks,

*From:* Gene
*Sent:* Saturday, October 8, 2016 8:14 AM
*To:* nvda@nvda.groups.io
*Subject:* Re: [nvda] creating a profile

When I open an e-mail message, even though my messages are read
automatically, I manually issue the read to end command before or at the
moment reading starts. I find this more efficient in starting reading
faster and avoiding material I don't want read. I have already heard
the subject line. If I tell the message to be read manually, this
material is not spoken again and the message body starts to be read.
You may have to experiment to see how long to wait before issuing the
command after opening a message.

There are times when getting in the habit of manually issuing a command
is superior to having something done automatically unless you know how
to script a screen-reader to do exactly what you want it to do. Issuing
such a command will become automatic over time.

Gene

*From:* Rui Fontes
*Sent:* Saturday, October 08, 2016 6:53 AM
*To:* nvda@nvda.groups.io
*Subject:* Re: [nvda] creating a profile

Sorry, but Windows Live Mail already does that...
And, a profil is only to set different configurations to an app or action...

What you want to achieve, if it is not already done, will need an
appmodule...

Rui


-----Mensagem Original-----
De: Gary Metzler
Data: 8 de outubro de 2016 11:10
Para: nvda@nvda.groups.io
Assunto: [nvda] creating a profile


Hi All,

Since I am new to nvda I would like to know if it is possible to create a
profile for windows live mail to read the entire message upon opening it?
If so, how is this done? Thanks for any help.Regards, Gary kn4ox






Re: creating a profile

Gary Metzler <gmtravel@...>
 

Hi John,

Thanks for the info.

-----Original Message-----
From: John Sanfilippo
Sent: Saturday, October 8, 2016 1:25 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] creating a profile

Hi,

I was going to suggest the same thing: turn on SayAll in BrowseMode, and
then:

Using Thunderbird as the mail client, I found that on opening most
messages, NVDA would get super chatty, reading and rereading headings,
but, I'd just tap the up arrow and the message body would be read. Very
nice.
But this may not work in WLM., and it doesn't work with certain messages.

John S



On 10/8/16 12:55, Gene wrote:
I doubt this will help but In browse mode settings in NVDA, see if the
setting that tells NVDA to read page automatically when page loads is
checked. It is by default but if it isn't checked, checking it may
solve the problem.

Gene

*From:* Gary Metzler <mailto:gmtravel@...>
*Sent:* Saturday, October 08, 2016 11:46 AM
*To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
*Subject:* Re: [nvda] creating a profile

I am reading in html.

*From:* Gene
*Sent:* Saturday, October 8, 2016 12:15 PM
*To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
*Subject:* Re: [nvda] creating a profile

I'm not sure. I don't think you specified what e-mail program you are
using. Also, are you reading mail as plain text or as HTML.

Gene
----- Original Message -----
*From:* Gary Metzler
*Sent:* Saturday, October 08, 2016 11:10 AM
*To:* nvda@nvda.groups.io
*Subject:* Re: [nvda] creating a profile

HI Gene,

When I opened this message it only read the first sentence. Can this be
changed? Thanks,

*From:* Gene
*Sent:* Saturday, October 8, 2016 8:14 AM
*To:* nvda@nvda.groups.io
*Subject:* Re: [nvda] creating a profile

When I open an e-mail message, even though my messages are read
automatically, I manually issue the read to end command before or at the
moment reading starts. I find this more efficient in starting reading
faster and avoiding material I don't want read. I have already heard
the subject line. If I tell the message to be read manually, this
material is not spoken again and the message body starts to be read.
You may have to experiment to see how long to wait before issuing the
command after opening a message.

There are times when getting in the habit of manually issuing a command
is superior to having something done automatically unless you know how
to script a screen-reader to do exactly what you want it to do. Issuing
such a command will become automatic over time.

Gene

*From:* Rui Fontes
*Sent:* Saturday, October 08, 2016 6:53 AM
*To:* nvda@nvda.groups.io
*Subject:* Re: [nvda] creating a profile

Sorry, but Windows Live Mail already does that...
And, a profil is only to set different configurations to an app or action...

What you want to achieve, if it is not already done, will need an
appmodule...

Rui


-----Mensagem Original-----
De: Gary Metzler
Data: 8 de outubro de 2016 11:10
Para: nvda@nvda.groups.io
Assunto: [nvda] creating a profile


Hi All,

Since I am new to nvda I would like to know if it is possible to create a
profile for windows live mail to read the entire message upon opening it?
If so, how is this done? Thanks for any help.Regards, Gary kn4ox