Date   

Re: Editing excel

Christo Vorster
 

Hi

 

On our machines, windows 10, office 2010 and  NVDA 2016.3, f2 still work perfectly. It seems to me that Office 365 might be the problem.

 

I must stress, I am NOT a boffin on all the software, this is just a guess.

 

Regards

 

Bhristo Vorster (Worcester, South Africa)

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Ketan Kothari
Sent: Friday, 04 November 2016 3:56 AM
To: nvda@nvda.groups.io
Subject: [nvda] Editing excel

 

            Hi friends,

 

 

I am using office 365 and don’t know how to edit any excel cell.  In earlier times with JAWS f2 used to help.  Can any one please guide?

 

Thank you.

 

Ketan


Re: NVDA "All things for all people!"

Christo Vorster
 

Hi Carlos and list

I couldn't agree more.

I, for one, wishes that I could have the functionality of JAWS when using Duxbury 11.1 and 11.2. But I realise that I do things that the braille fundis simply forbid. I edit my "brf" files. I understand that the developers of NVDA probably have not taken much time to make NVDA completely functional in Duxbury and therefore I accept the fact.

For the rest, I genuinely salute our developers.

Thanks a million, and keep up the good work.

Regards

Christo Vorster (Worcester, South Africa)

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Carlos
Sent: Friday, 04 November 2016 2:53 PM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA "All things for all people!"

Hello All:

As I read all the various wish list post here on the list I wish to remind all of our users on this list that NVDA is a project maintained by a handful of developers and not some big software company like the other screen readers which need not be mentioned at this time.

There are many of you that at times complain about NVDA being too slow on your older machines. Do you have an understanding that the bigger NVDA gets filled with all of your requested features the bigger it will get and the slower it will become!

For a while now it has been mentioned on this list that users should be able to have access to more than one screen reader. Even if it is a demo version because some programs will work better with other screen readers than with NVDA!

And finally, if you want NVDA to work with older Windows Operating Systems you need to be realistic in your expectations as far as how many new features can be added to NVDA that can be supported by older Windows Operating Systems?

In conclusion: Be grateful for what you have with NVDA! And be more considerate of the Gentlemen who so willingly/lovingly give of their time to make NVDA possible for all of us to use!!!



--
Carlos Gonzalez - Los Angeles, CA. - gmjc341961@gmail.com


Re: hidden files and folders

Jacob Kruger
 

Depending on your operating system? the next step is something else you can try.


If under something like windows XP, or windows 7, try invoking view menu in said same folder, arrow up to folder options, and, ctrl+tab over to view page, tab over to the treeview, and, arrow down to look for hidden files and, folders, and, under it, hit the space bar on the option to view hidden files and folders, then tab over to ok button, and, hit space on it.


You will probably want to undo that afterwards, since it can, at times offer you a whole bunch of files and folders you aren't interested in viewing, but, it might help.


The command prompt option also depends on your operating system somewhat - don't enter into the folder, but, highlight it from windows/file explorer, invoke context menu, either using the specific key on your keyboard, or using the key combo of shift+F10, and, look for a menu item relating to opening a command prompt there, and hit enter.

Then, as long as the command prompt shows the correct path - something like c:\myFolderWhereICopiedFiles> - depending on where you copied the files, then the following command will turn off hidden attribute on all files - but, not sure if you need to be a system administrator for it to work:

attrib -h *.*


And, then, to leave the command line console, just type in exit, and hit enter, but, like keep saying this can all be slightly different depending on operating system version.


Stay well


Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."
On 2016-11-09 5:04 AM, Marisane Moruthanyana wrote:

Hi man

 

I tried the first step, that of entering the folder and invoking the context sensitive menu with the application key but to no avail.

 

You are getting too technical with the second step.

 

How to activate a command line prompt?

 

Help.

 

Marissane

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Jacob Kruger
Sent: 08 November 2016 11:04 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] hidden files and folders

 

One small thing you can try first is to enter the folder under windows/file explorer, but, before doing anything else, invoke context menu, arrow up to view sub-menu, open it, and make sure list is the selected item/option.

 

Think that should work on most versions of windows, or if it's an older one, then invoke the view menu, and, again, look for list.

 

Besides that, you might otherwise need to use a command line prompt to turn off hidden attribute, etc. on those files if they're there.

 

Stay well

 

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."

On 2016-11-08 10:41 PM, Marisane Moruthanyana wrote:

Evening guys

 

I hope you are all well from wherever you are.

 

I am stuck and confused.

 

I use nvda as my screen reader.

 

I copied files and folders from a sd card (8 gb)

 

I am sure that they are there, because I can play them with vlc or winamp by pressing the application key and choose the application by which I want them to play.

 

However, when I open the folder in which I expect them  to be located, I cannot find them.

 

I only find them by searching for them with windows.

 

What is happening?

 

Why the folder empty though files / folders are seemingly there?

 

How to activate the windows explorer for me to see the files / folders the normal way?

 

Your help is appreciated in advance.

 

Marisane

 



Re: strange NVDA problems

Gene
 

If NVDA was installed, it creates a short cut on the desktop and as I recall, it also creates a short cut command, control alt n to run NVDA.  While you might want NVDA to run at boot up, it is not necessary to have it run automatically to start it yourself.  and in addition, you should know how to run it yourself because at times you need to restart it.  This can usually be done, as I understand it, by using the short cut command even when NVDA is already running.
 
Gene

Sent: Tuesday, November 08, 2016 6:24 PM
Subject: [nvda] strange NVDA problems

A friend loaded NVDA on an old vista computer I was given.  NVDA won't
let me check the box about automaticly starting NVDA when windows
start.  I do't know if vista is the problem.  I'm also not sure if I
have a 32 or 2=62 bit.  To use the coputer, I have to have my friend get
it started for me.  I'm ot sure what the problem is.


Melissa




Re: strange NVDA problems

Jacob Kruger
 

Melissa, did they install it under program files, or as a portable version?


If portable, then you might need to add a start menu shortcut under the start folder, but, I have no experience with vista.


Besides that, think either hitting windows key + U, possibly followed a couple of seconds later, might bring up vista's rendtion of MS narrator, whereas just the first keystroke did it under XP, but, like said, have no experience with vista.


Stay well


Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."

On 2016-11-09 2:24 AM, Melissa Galbraith wrote:
A friend loaded NVDA on an old vista computer I was given. NVDA won't let me check the box about automaticly starting NVDA when windows start. I do't know if vista is the problem. I'm also not sure if I have a 32 or 2=62 bit. To use the coputer, I have to have my friend get it started for me. I'm ot sure what the problem is.


Melissa





Re: hidden files and folders

Marisane Moruthanyana
 

Hi man

 

I tried the first step, that of entering the folder and invoking the context sensitive menu with the application key but to no avail.

 

You are getting too technical with the second step.

 

How to activate a command line prompt?

 

Help.

 

Marissane

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Jacob Kruger
Sent: 08 November 2016 11:04 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] hidden files and folders

 

One small thing you can try first is to enter the folder under windows/file explorer, but, before doing anything else, invoke context menu, arrow up to view sub-menu, open it, and make sure list is the selected item/option.

 

Think that should work on most versions of windows, or if it's an older one, then invoke the view menu, and, again, look for list.

 

Besides that, you might otherwise need to use a command line prompt to turn off hidden attribute, etc. on those files if they're there.

 

Stay well

 

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."

On 2016-11-08 10:41 PM, Marisane Moruthanyana wrote:

Evening guys

 

I hope you are all well from wherever you are.

 

I am stuck and confused.

 

I use nvda as my screen reader.

 

I copied files and folders from a sd card (8 gb)

 

I am sure that they are there, because I can play them with vlc or winamp by pressing the application key and choose the application by which I want them to play.

 

However, when I open the folder in which I expect them  to be located, I cannot find them.

 

I only find them by searching for them with windows.

 

What is happening?

 

Why the folder empty though files / folders are seemingly there?

 

How to activate the windows explorer for me to see the files / folders the normal way?

 

Your help is appreciated in advance.

 

Marisane

 


Re: strange NVDA problems

Gene New Zealand <hurrikennyandopo@...>
 

Hi


Did he actually install the installer version of NVDA? if that is the
case when it was first put on to the pc there was a option that would
let him pick the capslock key as a modifier key and also have nvda start
at startup when windows starts.

If he skipped that screen he if the installer version was used also
check it under the general settings in nvda.


I am guessing he might of used the installer version of nvda and the
option is not there. if it was he couldive checked it with the spacebar.

If the installer version is installed you should also see a shortcut on
the desktop and also a menu under the all programs/all apps section
depending on which operating system, i think you mentioned vista. not
sure what it is called there.

I guess also if he did install the portable version he may not have
asigned a shortcut to start up the portable copy of nvda.

Any how if this is the case when nvda is running use the nvda key + the
letter N to bring up the preferences of nvda.
Arrow down to tools, then right to view log.
Next arrow down to install nvda then press the enter key. it is a matter
of following the directions until nvda is fully installed.

It should then also put a menu under the all programs section as well as
a shortcut on the desktop if there is none there.

hope this helps.

Gene nz

On 9/11/2016 1:24 PM, Melissa Galbraith wrote:
A friend loaded NVDA on an old vista computer I was given. NVDA won't
let me check the box about automaticly starting NVDA when windows
start. I do't know if vista is the problem. I'm also not sure if I
have a 32 or 2=62 bit. To use the coputer, I have to have my friend
get it started for me. I'm ot sure what the problem is.


Melissa




ANOTHER STRANGE THING

Melissa Galbraith <wvflutist@...>
 

i MAY HAVE ADDRESSED THIS IN PREVIOUS EMAILS BUT CAN'T REMEMBER. wHEN i USE nvda ON MY VISA COMPUTER THE COMMANDS THAT USE A HARD INSERT KEY INSTEAD OF CAPS, i CAN USE THE COMMANDS. i HAVE MY LAPTOP SET UP AS LAPTOP FORMAT AND USE CAPS LOCKS, BUT IT DOESN'T DO THE COMMANDS. i'M USING THE CORRECT COMMANDS FOR WHAT i WANT, BUT T DOESN'T WORK. aNY SUGGESTIONS?


mELISSA


strange NVDA problems

Melissa Galbraith <wvflutist@...>
 

A friend loaded NVDA on an old vista computer I was given. NVDA won't let me check the box about automaticly starting NVDA when windows start. I do't know if vista is the problem. I'm also not sure if I have a 32 or 2=62 bit. To use the coputer, I have to have my friend get it started for me. I'm ot sure what the problem is.


Melissa


Re: hidden files and folders

Jacob Kruger
 

One small thing you can try first is to enter the folder under windows/file explorer, but, before doing anything else, invoke context menu, arrow up to view sub-menu, open it, and make sure list is the selected item/option.


Think that should work on most versions of windows, or if it's an older one, then invoke the view menu, and, again, look for list.


Besides that, you might otherwise need to use a command line prompt to turn off hidden attribute, etc. on those files if they're there.


Stay well


Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."
On 2016-11-08 10:41 PM, Marisane Moruthanyana wrote:

Evening guys

 

I hope you are all well from wherever you are.

 

I am stuck and confused.

 

I use nvda as my screen reader.

 

I copied files and folders from a sd card (8 gb)

 

I am sure that they are there, because I can play them with vlc or winamp by pressing the application key and choose the application by which I want them to play.

 

However, when I open the folder in which I expect them  to be located, I cannot find them.

 

I only find them by searching for them with windows.

 

What is happening?

 

Why the folder empty though files / folders are seemingly there?

 

How to activate the windows explorer for me to see the files / folders the normal way?

 

Your help is appreciated in advance.

 

Marisane



Re: cloning hard drives with NVDA

Gene New Zealand <hurrikennyandopo@...>
 

Hi


Off the following link off this page, there is info on windows PE and a
link to the downloads page etc.


You can jump down by headings to the windows PE section and there is a
link to where the downloads etc is. They are for windows 7 and 10 both
32 bit and 64 bit.

There is no audio tutorial, that I know has been done so far apart from
a very old one for windows 7.


the link to this page is
http://www.accessibilitycentral.net/nvda%20tutorials%20for%20other%20programs.html


it is just above the netflix section.


hope it helps.


Gene nz

On 9/11/2016 9:39 AM, Hicks Steven (CORNWALL IT SERVICES) wrote:
That is really useful, do you have a link for the windows PE download and does that have NVDA and start talking after it has booted up?


-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Jeremy
Sent: Tuesday, November 8, 2016 7:51 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] cloning hard drives with NVDA

You can't make a clone of a larger hard drive and fit it into a smaller one, rather, you need to shrink the partition that contains the stuff you wish to mirror down to a size that fits inside the new hd and then regrow the partition, once you've cloned it. Shrink the NTFS partition inside windows, make an image of it using the free version of ActivAT inside the talking PE, write the created image to the new disk, also using ActivAT and attempt to boot back into windows again. If you are able to boot into windows, regrow the partition to fit the new disk again. Once you've regrown the partition to fit the SSD, make an image of it, once again using ActivAT, so you don't have to go through the process if you decide to restore the image, later on.
The PE should also contain the tools necessary to fix any issues with the MBR, but you may not need them. Out of all the different options that I looked into, to try and do the same thing, clonezilla and whatever else, this was the easiest.



On 11/7/2016 8:50 PM, Josh Kennedy wrote:
I just got a new computer. I installed macrium reflect. NVDA, and the
OCR addon. I have a 240gig regular hard drive in this laptop. The
drive only has about 25gb of stuff including the operating system.
When I try cloning the larger 250gig drive to the smaller 120gig ssd
it says not enough space. How do I fix this? Or will I just have to
put in the new ssd and do a clean install?


Josh








********************************************************************************************************************

This message may contain confidential information. If you are not the intended recipient please inform the
sender that you have received the message in error before deleting it.
Please do not disclose, copy or distribute information in this e-mail or take any action in reliance on its contents:
to do so is strictly prohibited and may be unlawful.

Thank you for your co-operation.

NHSmail is the secure email and directory service available for all NHS staff in England and Scotland
NHSmail is approved for exchanging patient data and other sensitive information with NHSmail and GSi recipients
NHSmail provides an email address for your career in the NHS and can be accessed anywhere
For more information and to find out how you can switch, visit www.nhsdigital.nhs.uk/nhsmail

********************************************************************************************************************



hidden files and folders

Marisane Moruthanyana
 

Evening guys

 

I hope you are all well from wherever you are.

 

I am stuck and confused.

 

I use nvda as my screen reader.

 

I copied files and folders from a sd card (8 gb)

 

I am sure that they are there, because I can play them with vlc or winamp by pressing the application key and choose the application by which I want them to play.

 

However, when I open the folder in which I expect them  to be located, I cannot find them.

 

I only find them by searching for them with windows.

 

What is happening?

 

Why the folder empty though files / folders are seemingly there?

 

How to activate the windows explorer for me to see the files / folders the normal way?

 

Your help is appreciated in advance.

 

Marisane


Re: cloning hard drives with NVDA

Hicks Steven (CORNWALL IT SERVICES)
 

That is really useful, do you have a link for the windows PE download and does that have NVDA and start talking after it has booted up?

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Jeremy
Sent: Tuesday, November 8, 2016 7:51 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] cloning hard drives with NVDA

You can't make a clone of a larger hard drive and fit it into a smaller one, rather, you need to shrink the partition that contains the stuff you wish to mirror down to a size that fits inside the new hd and then regrow the partition, once you've cloned it. Shrink the NTFS partition inside windows, make an image of it using the free version of ActivAT inside the talking PE, write the created image to the new disk, also using ActivAT and attempt to boot back into windows again. If you are able to boot into windows, regrow the partition to fit the new disk again. Once you've regrown the partition to fit the SSD, make an image of it, once again using ActivAT, so you don't have to go through the process if you decide to restore the image, later on.
The PE should also contain the tools necessary to fix any issues with the MBR, but you may not need them. Out of all the different options that I looked into, to try and do the same thing, clonezilla and whatever else, this was the easiest.



On 11/7/2016 8:50 PM, Josh Kennedy wrote:
I just got a new computer. I installed macrium reflect. NVDA, and the
OCR addon. I have a 240gig regular hard drive in this laptop. The
drive only has about 25gb of stuff including the operating system.
When I try cloning the larger 250gig drive to the smaller 120gig ssd
it says not enough space. How do I fix this? Or will I just have to
put in the new ssd and do a clean install?


Josh









********************************************************************************************************************

This message may contain confidential information. If you are not the intended recipient please inform the
sender that you have received the message in error before deleting it.
Please do not disclose, copy or distribute information in this e-mail or take any action in reliance on its contents:
to do so is strictly prohibited and may be unlawful.

Thank you for your co-operation.

NHSmail is the secure email and directory service available for all NHS staff in England and Scotland
NHSmail is approved for exchanging patient data and other sensitive information with NHSmail and GSi recipients
NHSmail provides an email address for your career in the NHS and can be accessed anywhere
For more information and to find out how you can switch, visit www.nhsdigital.nhs.uk/nhsmail

********************************************************************************************************************


Re: Off Topic: Requests to join Linked In networks from list members

Sharni-Lee Ward
 

The only reason I took it seriously was because I recognised the names.
I thought those people had intentionally sent them to me. I'll ignore
them in future and hopefully they'll just go away...

On 8/11/2016 8:16 PM, Brian's Mail list account wrote:
I have blocked those addresses. I treat these as spam as most probably
are just that and fake in any case.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message ----- From: "Arlene" <nedster66@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Tuesday, November 08, 2016 3:28 AM
Subject: Re: [nvda] Off Topic: Requests to join Linked In networks
from list members


Yes, I got a few. They soon stopped. I don’t get them anymore.



From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Rosemarie Chavarria
Sent: November-07-16 2:15 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Off Topic: Requests to join Linked In networks
from list members



I delete messages likethat too. I have no interest in joining
linked-in or any other social n



etwork.

On 11/7/2016 1:21 PM, Arlene wrote:

Hi, I got those too. But I just hit the delete key. I have no reason
to join linked in. Some time ago I got two people wanting me to join
their linked in. But I just ignored it.



From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: November-07-16 1:04 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Off Topic: Requests to join Linked In networks
from list members



Ignore it. I get such invitations from time to time. Linked In may
do something like look at a new member's address book when they
subscribe. Or if they don't, and the person has asked you to join,
just ignore it. All it means is that they got your address from your
list mail and asked you to join. they may not even know it is
occurring if Linked In does this with new members. The Internet world
is full of such nonsense. Just ignore all such messages. Don't
respond in any way. It's a waste of time.



Gene

----- original Message -----

From: Sharni-Lee Ward <mailto:sharni-lee.ward@hotmail.com>

Sent: Monday, November 07, 2016 2:36 PM

To: nvda@nvda.groups.io

Subject: [nvda] Off Topic: Requests to join Linked In networks from
list members




I don't usually send off-topic posts to the list and I apologise, but
two people from this list, Volly Nelson and Alex Stone, have sent me
requests to join their network on Linkedin, and I don't have an account
with said site and no reason to make one. I don't understand why I'm
receiving these emails but I would like them to stop.












Re: cloning hard drives with NVDA

Jeremy <icu8it2@...>
 

You can't make a clone of a larger hard drive and fit it into a smaller one, rather, you need to shrink the partition that contains the stuff you wish to mirror down to a size that fits inside the new hd and then regrow the partition, once you've cloned it. Shrink the NTFS partition inside windows, make an image of it using the free version of ActivAT inside the talking PE, write the created image to the new disk, also using ActivAT and attempt to boot back into windows again. If you are able to boot into windows, regrow the partition to fit the new disk again. Once you've regrown the partition to fit the SSD, make an image of it, once again using ActivAT, so you don't have to go through the process if you decide to restore the image, later on.
The PE should also contain the tools necessary to fix any issues with the MBR, but you may not need them. Out of all the different options that I looked into, to try and do the same thing, clonezilla and whatever else, this was the easiest.

On 11/7/2016 8:50 PM, Josh Kennedy wrote:
I just got a new computer. I installed macrium reflect. NVDA, and the OCR addon. I have a 240gig regular hard drive in this laptop. The drive only has about 25gb of stuff including the operating system. When I try cloning the larger 250gig drive to the smaller 120gig ssd it says not enough space. How do I fix this? Or will I just have to put in the new ssd and do a clean install?


Josh




Re: Alert

 

Here is the link to the website sending me the ad about Password management:
http://www.advancedpasswordmanager.com/adb/1/?utm_source=adbffapm&;utm_campaign=adbffapm&pxl=ADB1178_ADB1156_ADB624
It sounds a legitimate enterprise, but I'd like to hear your opinion.
Nevzt Adil

On 11/8/16, Nevzat Adil <nevzatadil@gmail.com> wrote:
The alert is asking me to download their so-called advanced password
management. I did alt+a and accessed the mesage and closed it. Let's
see if it comes back again. Thank you all for your responses.

On 11/8/16, Brian's Mail list account <bglists@blueyonder.co.uk> wrote:
Alt/a I think on Firefox.
However one needs to know exactly what is giving you the alert in the
first

place. Lots of programs give dire warnings for no good reason and some
are
in fact ad ware which has sneaked through in an add on to firefox or
firewall.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Nevzat Adil" <nevzatadil@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Monday, November 07, 2016 9:35 PM
Subject: [nvda] Alert


Hello everyone,
Recently I began receiving an alert saying my identity is at riesk and
that I should download an advanced password management to safeguard my
identity. With Internet Explorer I used to do alt+n to deal with such
notifications. but with Firefox I have no idea.
I use Windows 10 with Firefox and NVDA.
Has any of you received such alerts recently and if you have
how did you deal with it?
Your response will be appreciated.
Nevzat Adil








Re: Off Topic: Requests to join Linked In networks from list members

enes sarıbaş
 

hi,

linkedin automaticly sends out these messages. I assure you that these people probably did not send these out on purpose.

On 11/7/2016 11:36 PM, Sharni-Lee Ward wrote:
I don't usually send off-topic posts to the list and I apologise, but
two people from this list, Volly Nelson and Alex Stone, have sent me
requests to join their network on Linkedin, and I don't have an account
with said site and no reason to make one. I don't understand why I'm
receiving these emails but I would like them to stop.



Re: Alert

 

The alert is asking me to download their so-called advanced password
management. I did alt+a and accessed the mesage and closed it. Let's
see if it comes back again. Thank you all for your responses.

On 11/8/16, Brian's Mail list account <bglists@blueyonder.co.uk> wrote:
Alt/a I think on Firefox.
However one needs to know exactly what is giving you the alert in the first

place. Lots of programs give dire warnings for no good reason and some are
in fact ad ware which has sneaked through in an add on to firefox or
firewall.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Nevzat Adil" <nevzatadil@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Monday, November 07, 2016 9:35 PM
Subject: [nvda] Alert


Hello everyone,
Recently I began receiving an alert saying my identity is at riesk and
that I should download an advanced password management to safeguard my
identity. With Internet Explorer I used to do alt+n to deal with such
notifications. but with Firefox I have no idea.
I use Windows 10 with Firefox and NVDA.
Has any of you received such alerts recently and if you have
how did you deal with it?
Your response will be appreciated.
Nevzat Adil






vocalizer with nvda — is it still alive?

mrdin8877@...
 

hi, 
does nvda uses vocalizer 2 point 2 or still version 1? and if it is still in version 1, will the synthesizer be updated? last i check at the vocalizer-nvda dot com, it was copyright 2013.  3 years had past since then. also, i don't like the codefactory version because, it will take quite sometime for nvda to launch because it is checking for the licencing or something on the internet. and, the codefactory doesn't has compact voices i think. sorry if this has been asked and thanks!.



amir.


NVDA on groups.io

NVDA is developed by NV Access in collaboration with the community.
Get NVDA from: http://www.nvaccess.org/
Your continued donations help keep NVDA development going strong. Donate at:
http://www.nvaccess.org/donate
Other links:
Come talk with other NVDA users on irc.blufudge.net #NVDA
Get NVDA add-ons at:
http://addons.nvda-project.org/
NVDA on Facebook:
http://www.facebook.com/group.php?gid=8601265515
Get SkypeTalking for NVDA:
http://skypetalking.googlecode.com/

Groups.io Links:

You receive all messages sent to this group.

View/Reply Online (#10245)
View All Messages In Topic (2)
Reply To Sender
Reply To Group
Mute This Topic
New Topic
Change Your Subscription

Group Home
Contact Group Owner

Terms Of Service

Unsubscribe From This Group

_._,_._,_


Re: Alert

Brian's Mail list account <bglists@...>
 

Alt/a I think on Firefox.
However one needs to know exactly what is giving you the alert in the first place. Lots of programs give dire warnings for no good reason and some are in fact ad ware which has sneaked through in an add on to firefox or firewall.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Nevzat Adil" <nevzatadil@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Monday, November 07, 2016 9:35 PM
Subject: [nvda] Alert


Hello everyone,
Recently I began receiving an alert saying my identity is at riesk and
that I should download an advanced password management to safeguard my
identity. With Internet Explorer I used to do alt+n to deal with such
notifications. but with Firefox I have no idea.
I use Windows 10 with Firefox and NVDA.
Has any of you received such alerts recently and if you have
how did you deal with it?
Your response will be appreciated.
Nevzat Adil