Date   

Re: NVDA 2017.1 is out!

Mário Navarro
 

   


Wow, thank you to all the people who work on this wonderful screen reader.
This is phenomenal!

cheers.


Às 05:22 de 22/02/2017, Joseph Lee escreveu:

Hi,


For Windows 10 users: I advise you to upgrade to 2017.1 or later, as it lays the foundation to support upcoming Creators Update.

Cheers,

Joseph

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Kwork
Sent: Tuesday, February 21, 2017 9:13 PM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA 2017.1 is out!

 

Here's the link for the announcement:

 

 

Enjoy.

 

Travis



Re: nvda announcing clipboard functions and other keystrokes

Tyler Spivey
 

Here's how to fix this, and hopefully have it wait until something has been copied.
* Write an addon which binds control x and control c. When you press one of these keys, It sets a flag.
* Have the addon create a window and call AddClipboardFormatListener. When responding to WM_CLIPBOARDUPDATE, it should speak cut or copied depending on what was pressed.

On 2/21/2017 8:45 PM, Kwork wrote:
Thank you Gene from NZ. While I'd still like things to be different, this is
a good check to make sure something's been copied or cut to the clipboard.
Travis
----- Original Message -----
From: "Gene New Zealand" <hurrikennyandopo@outlook.co.nz>
To: <nvda@nvda.groups.io>
Sent: Tuesday, February 21, 2017 7:37 PM
Subject: Re: [nvda] nvda announcing clipboard functions and other keystrokes


When ever i do a copy and pastei always use a extra step which is using
the nvda key + letter C and it will tell me if there is text there or not.


My self i do not need to know or hear it say copy or paste. it is just a
matter of when i do do a copy i put in that extra step.


The same idea if you use the nvda key + f9 key to start a mark and then
the nvda key + f10 to say it has been copied i can confirm with the
extra step if needed.


Gene nz



On 22/02/2017 11:38 AM, Kwork wrote:
I used that add-on for a short while. The problem I found was that it
wasn't
reliable. There were times that I'd use it, hear the announcement, only to
find that the action hadn't been true to the announcement. The add-on
seems
to verify the keystroke, but doesn't wait to do so till after the action
itself has been verified. This is one small area where Jaws is still
ahead.
Travis
----- Original Message -----
From: "David Griffith" <daj.griffith@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Tuesday, February 21, 2017 6:00 AM
Subject: Re: [nvda] nvda announcing clipboard functions and other
keystrokes


There is an addon which makes these announcements available.


It is called Fake Clipboard announce or something like that.

You should able to find it on the addons repositary.



David Griffith

On 21/02/2017 12:32, erik burggraaf wrote:

Hi, I have to figure this out and don't have an nvda machine to poke
around on. It never used to bother me that NVDA doesn't announce cut,
copy, paste, in particular, and other functions accessible using
windows standard keys, but I've got a friend who is a new user of NVDA
and he needs some more feedback from keystrokes, particularly these
clipboard functions. Is there a setting to enable speaking for these
keys, or do I need to install an add-on for this?

Thanks,

Erik

Sent with AquaMail for Android
http://www.aqua-mail.com









Re: NVDA 2017.1 is out!

 

Hi,


For Windows 10 users: I advise you to upgrade to 2017.1 or later, as it lays the foundation to support upcoming Creators Update.

Cheers,

Joseph

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Kwork
Sent: Tuesday, February 21, 2017 9:13 PM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA 2017.1 is out!

 

Here's the link for the announcement:

 

 

Enjoy.

 

Travis


NVDA 2017.1 is out!

Kwork
 

Here's the link for the announcement:
 
 
Enjoy.
 
Travis


Re: nvda announcing clipboard functions and other keystrokes

Kwork
 

Thank you Gene from NZ. While I'd still like things to be different, this is
a good check to make sure something's been copied or cut to the clipboard.
Travis

----- Original Message -----
From: "Gene New Zealand" <hurrikennyandopo@outlook.co.nz>
To: <nvda@nvda.groups.io>
Sent: Tuesday, February 21, 2017 7:37 PM
Subject: Re: [nvda] nvda announcing clipboard functions and other keystrokes


When ever i do a copy and pastei always use a extra step which is using
the nvda key + letter C and it will tell me if there is text there or not.


My self i do not need to know or hear it say copy or paste. it is just a
matter of when i do do a copy i put in that extra step.


The same idea if you use the nvda key + f9 key to start a mark and then
the nvda key + f10 to say it has been copied i can confirm with the
extra step if needed.


Gene nz



On 22/02/2017 11:38 AM, Kwork wrote:
I used that add-on for a short while. The problem I found was that it
wasn't
reliable. There were times that I'd use it, hear the announcement, only to
find that the action hadn't been true to the announcement. The add-on
seems
to verify the keystroke, but doesn't wait to do so till after the action
itself has been verified. This is one small area where Jaws is still
ahead.
Travis
----- Original Message -----
From: "David Griffith" <daj.griffith@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Tuesday, February 21, 2017 6:00 AM
Subject: Re: [nvda] nvda announcing clipboard functions and other
keystrokes


There is an addon which makes these announcements available.


It is called Fake Clipboard announce or something like that.

You should able to find it on the addons repositary.



David Griffith

On 21/02/2017 12:32, erik burggraaf wrote:

Hi, I have to figure this out and don't have an nvda machine to poke
around on. It never used to bother me that NVDA doesn't announce cut,
copy, paste, in particular, and other functions accessible using
windows standard keys, but I've got a friend who is a new user of NVDA
and he needs some more feedback from keystrokes, particularly these
clipboard functions. Is there a setting to enable speaking for these
keys, or do I need to install an add-on for this?

Thanks,

Erik

Sent with AquaMail for Android
http://www.aqua-mail.com








--
<b>Check out the new location of my accessibility central website for NVDA
tutorials, NVDA road tested programs, and other eyesight related topics.
http://www.accessibilitycentral.net/ If you would like to keep up to date
with whats being updated on our website, you can also follow us on facebook
by visiting
the following link
https://en-gb.facebook.com/people/AccessibilityCentral-Net/100009727930216
Also, check out which New Zealand libraries have the NVDA screen reader
available by visiting the following link
http://www.aotearoapeoplesnetwork.org/content/partner-libraries


Re: nvda announcing clipboard functions and other keystrokes

Gene New Zealand <hurrikennyandopo@...>
 

When ever i do a copy and pastei always use a extra step which is using
the nvda key + letter C and it will tell me if there is text there or not.


My self i do not need to know or hear it say copy or paste. it is just a
matter of when i do do a copy i put in that extra step.


The same idea if you use the nvda key + f9 key to start a mark and then
the nvda key + f10 to say it has been copied i can confirm with the
extra step if needed.


Gene nz

On 22/02/2017 11:38 AM, Kwork wrote:
I used that add-on for a short while. The problem I found was that it wasn't
reliable. There were times that I'd use it, hear the announcement, only to
find that the action hadn't been true to the announcement. The add-on seems
to verify the keystroke, but doesn't wait to do so till after the action
itself has been verified. This is one small area where Jaws is still ahead.
Travis
----- Original Message -----
From: "David Griffith" <daj.griffith@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Tuesday, February 21, 2017 6:00 AM
Subject: Re: [nvda] nvda announcing clipboard functions and other keystrokes


There is an addon which makes these announcements available.


It is called Fake Clipboard announce or something like that.

You should able to find it on the addons repositary.



David Griffith

On 21/02/2017 12:32, erik burggraaf wrote:

Hi, I have to figure this out and don't have an nvda machine to poke
around on. It never used to bother me that NVDA doesn't announce cut,
copy, paste, in particular, and other functions accessible using
windows standard keys, but I've got a friend who is a new user of NVDA
and he needs some more feedback from keystrokes, particularly these
clipboard functions. Is there a setting to enable speaking for these
keys, or do I need to install an add-on for this?

Thanks,

Erik

Sent with AquaMail for Android
http://www.aqua-mail.com








--
<b>Check out the new location of my accessibility central website for NVDA tutorials, NVDA road tested programs, and other eyesight related topics.
http://www.accessibilitycentral.net/ If you would like to keep up to date with whats being updated on our website, you can also follow us on facebook by visiting
the following link https://en-gb.facebook.com/people/AccessibilityCentral-Net/100009727930216
Also, check out which New Zealand libraries have the NVDA screen reader available by visiting the following link http://www.aotearoapeoplesnetwork.org/content/partner-libraries


Re: editing new macros in Word 2010 to 2016

Pranav Lal
 

Hi Cearbhall,

Hit alt+f11 to activate the VBA editor. You then need to hunt for the right
module where your macro is. Hit ctrl+r to get to a list of modules. This is a
treeview so poke around until you find your macro. Once you do it, you use
standard text editing keystrokes. The only thing that fails with NVDA is
detecting code completion. I have been meaning to file an issue about this.

The VBA editor is similar to the visual basic 6 editor in visual studio
vversion 6 I think.
Pranav


Re: nvda announcing clipboard functions and other keystrokes

john s
 

As I understand it, the addon isn't at fault.  The only thing the addon does is tell you that the keys were pressed.   It isn't intended to tell you that the action was done.


earlier, Kwork, wrote:

From what I've been told, Window Eyes also waits for the action, and doesn't rely solely on the key press.
Travis
----- Original Message -----
From: Gene
To: nvda@nvda.groups.io
Sent: Tuesday, February 21, 2017 7:03 AM
Subject: Re: [nvda] nvda announcing clipboard functions and other keystrokes

That isn't how most screen-readers work.  I used to try to encourage that this feature be properly implemented by advocating for it here but I've given up.  JAWS knows when a copy or paste has been actually done and doesn't report it otherwise.  So does System Access.  I don't recall what Window-eyes does but since both JAWS and System
Acceess can do it, I would think it would be within reason to have NVDA do it.
 
Gene
----- Original Message -----
From: erik burggraaf
Sent: Tuesday, February 21, 2017 7:58 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] nvda announcing clipboard functions and other keystrokes

I could be wrong, but I'm pretty sure the bad is of the way that all screen
readers or at least most of them work.

Sent with AquaMail for Android
http://www.aqua-mail.com


On February 21, 2017 8:12:32 AM "Chris Mullins" <cjmullins29@...> wrote:

> Please note the add-on Announces the keypress only, not that the function
> has actually worked properly.
>
> Cheers
> Chris
>
> -----Original Message-----
> From: nvda@nvda.groups.io [ mailto:nvda@nvda.groups.io] On Behalf Of David
> Griffith
> Sent: 21 February 2017 13:01
> To: nvda@nvda.groups.io
> Subject: Re: [nvda] nvda announcing clipboard functions and other keystrokes
>
> There is an addon which makes these announcements available.
>
>
> It is called Fake Clipboard announce or something like that.
>
> You should able to find it on the addons repositary.
>
>
>
> David Griffith
>
> On 21/02/2017 12:32, erik burggraaf wrote:
>
>> Hi, I have to figure this out and don't have an nvda machine to poke
>> around on.  It never used to bother me that NVDA doesn't announce cut,
>> copy, paste, in particular, and other functions accessible using
>> windows standard keys, but I've got a friend who is a new user of NVDA
>> and he needs some more feedback from keystrokes, particularly these
>> clipboard functions. Is there a setting to enable speaking for these
>> keys, or do I need to install an add-on for this?
>>
>> Thanks,
>>
>> Erik
>>
>> Sent with AquaMail for Android
>> http://www.aqua-mail.com
>>
>>
>>
>>
>>
>
>
>
>
>
>
>




Re: Does firefox work with windows ten?

Gene
 

It's a firefox setting.  it has nothing to do with Windows.  therefore, it will work in all versions of Windows you can run Firefox on.  But as has been said, these settings are available in the add ons dialog when working with the Flash plugin.  the method being discussed is just another way of changing the settings.
 
Gene

----- Original Message -----
From: Arlene
Sent: Tuesday, February 21, 2017 4:59 PM
Subject: Re: [nvda] Does firefox work with windows ten?

Does this work for all windows computers? Including 7?

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of nasrin khaksar
Sent: February-21-17 9:43 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Does firefox work with windows ten?

hi again.
for security reasons and avoide system infected by malicious flash content,type about:config in addresss press enter twice.
in the search box peist plugin.state.flash press enter on it.
delete its number which is 2 by default.
type 1 instead of 2 and press enter to work.
because 2 means its activate by default.
but when you change it in to 1, it asks from users whether open flash content or not.
when its not loaded automaticly, it helps you to increase your security very much.
hope that helps and God bless you!

On 2/21/17, Arlene <nedster66@...> wrote:
> Oh okay, This sighted person watches the Young and the Restless on
> this one site using firefox.
>
> -----Original Message-----
> From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
> Shaun Everiss
> Sent: February-20-17 10:39 PM
> To: nvda@nvda.groups.io
> Subject: Re: [nvda] Does firefox work with windows ten?
>
> Flash crashes a lot on firefox but firefox, google and others are
> actively discouraging insecure flash though I still have it on systems
> because it is still used.
> Most sites like youtube use html5 now which is the new standard and
> which firefox supports.
>
>
>
> On 21/02/2017 7:23 p.m., Simon Jaeger wrote:
>> Hi,
>> Firstly, Firefox is actively being developed for Windows so I'm not
>> sure why anyone would think it doesn't work with Windows 10. I run it
>> myself and it's as stable here as it was on Windows xp. The issue
>> seems to involve Adobe Flash specifically, so it's a little more
>> complicated than just asking if Firefox works. I personally don't
>> have Flash and don't have any intention of installing it. I have seen
>> it crash in many places for many years, and there have always been
>> problems between Flash and Firefox as far back as the XP days. So
>> Firefox may work fine, and Adobe Flash may work perfectly for some
>> websites, but I'm not sure what to suggest if your friend is hell
>> bent on using Firefox for this particular site. I can tell you that
>> it probably has very little to do with Firefox, and may not even be
>> related to Windows 10. Sometimes, we just have to conclude that
>> certain sites and browsers don't get along. Google Chrome is pretty
> awesome if the friend doesn't like IE.
>>
>> Simon
>>
>> On 2017-02-20 21:56, Arlene wrote:
>>>
>>> Hi list: Arlene here! I have a sighted friend who's determined to
>>> make fire fox work with her win ten computer. She will not listen to
>>> me when I tell her it does not work. This is spasifically for
>>> Canadians to try this site with win ten and firefox.
>>>
>>> www.globaltv.com <http://www.globaltv.com>
>>>
>>> And watches the young nd the restless, she gets a message stating
>>> that adobe flash player has crashed. Does anyone know if fire fox is
>>> compatible with windows ten? thanks.
>>>
>>>
>>
>>
>
>
>
>
>
>
>


--
we have not sent you but as a mercy to the creation.
holy quran, chapter 21, verse 107.
in the very authentic narration is:
imam hosein is the beacon of light and the ark of salvation.
best website for studying islamic book in different languages al-islam.org







Re: nvda announcing clipboard functions and other keystrokes

Kwork
 

From what I've been told, Window Eyes also waits for the action, and doesn't rely solely on the key press.
Travis

----- Original Message -----
From: Gene
Sent: Tuesday, February 21, 2017 7:03 AM
Subject: Re: [nvda] nvda announcing clipboard functions and other keystrokes

That isn't how most screen-readers work.  I used to try to encourage that this feature be properly implemented by advocating for it here but I've given up.  JAWS knows when a copy or paste has been actually done and doesn't report it otherwise.  So does System Access.  I don't recall what Window-eyes does but since both JAWS and System
Acceess can do it, I would think it would be within reason to have NVDA do it.
 
Gene
----- Original Message -----
Sent: Tuesday, February 21, 2017 7:58 AM
Subject: Re: [nvda] nvda announcing clipboard functions and other keystrokes

I could be wrong, but I'm pretty sure the bad is of the way that all screen
readers or at least most of them work.

Sent with AquaMail for Android
http://www.aqua-mail.com


On February 21, 2017 8:12:32 AM "Chris Mullins" <cjmullins29@...> wrote:

> Please note the add-on Announces the keypress only, not that the function
> has actually worked properly.
>
> Cheers
> Chris
>
> -----Original Message-----
> From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of David
> Griffith
> Sent: 21 February 2017 13:01
> To: nvda@nvda.groups.io
> Subject: Re: [nvda] nvda announcing clipboard functions and other keystrokes
>
> There is an addon which makes these announcements available.
>
>
> It is called Fake Clipboard announce or something like that.
>
> You should able to find it on the addons repositary.
>
>
>
> David Griffith
>
> On 21/02/2017 12:32, erik burggraaf wrote:
>
>> Hi, I have to figure this out and don't have an nvda machine to poke
>> around on.  It never used to bother me that NVDA doesn't announce cut,
>> copy, paste, in particular, and other functions accessible using
>> windows standard keys, but I've got a friend who is a new user of NVDA
>> and he needs some more feedback from keystrokes, particularly these
>> clipboard functions. Is there a setting to enable speaking for these
>> keys, or do I need to install an add-on for this?
>>
>> Thanks,
>>
>> Erik
>>
>> Sent with AquaMail for Android
>> http://www.aqua-mail.com
>>
>>
>>
>>
>>
>
>
>
>
>
>
>





Re: Does firefox work with windows ten?

Arlene
 

Does this work for all windows computers? Including 7?

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of nasrin khaksar
Sent: February-21-17 9:43 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Does firefox work with windows ten?

hi again.
for security reasons and avoide system infected by malicious flash content,type about:config in addresss press enter twice.
in the search box peist plugin.state.flash press enter on it.
delete its number which is 2 by default.
type 1 instead of 2 and press enter to work.
because 2 means its activate by default.
but when you change it in to 1, it asks from users whether open flash content or not.
when its not loaded automaticly, it helps you to increase your security very much.
hope that helps and God bless you!

On 2/21/17, Arlene <nedster66@gmail.com> wrote:
Oh okay, This sighted person watches the Young and the Restless on
this one site using firefox.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Shaun Everiss
Sent: February-20-17 10:39 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Does firefox work with windows ten?

Flash crashes a lot on firefox but firefox, google and others are
actively discouraging insecure flash though I still have it on systems
because it is still used.
Most sites like youtube use html5 now which is the new standard and
which firefox supports.



On 21/02/2017 7:23 p.m., Simon Jaeger wrote:
Hi,
Firstly, Firefox is actively being developed for Windows so I'm not
sure why anyone would think it doesn't work with Windows 10. I run it
myself and it's as stable here as it was on Windows xp. The issue
seems to involve Adobe Flash specifically, so it's a little more
complicated than just asking if Firefox works. I personally don't
have Flash and don't have any intention of installing it. I have seen
it crash in many places for many years, and there have always been
problems between Flash and Firefox as far back as the XP days. So
Firefox may work fine, and Adobe Flash may work perfectly for some
websites, but I'm not sure what to suggest if your friend is hell
bent on using Firefox for this particular site. I can tell you that
it probably has very little to do with Firefox, and may not even be
related to Windows 10. Sometimes, we just have to conclude that
certain sites and browsers don't get along. Google Chrome is pretty
awesome if the friend doesn't like IE.

Simon

On 2017-02-20 21:56, Arlene wrote:

Hi list: Arlene here! I have a sighted friend who's determined to
make fire fox work with her win ten computer. She will not listen to
me when I tell her it does not work. This is spasifically for
Canadians to try this site with win ten and firefox.

www.globaltv.com <http://www.globaltv.com>

And watches the young nd the restless, she gets a message stating
that adobe flash player has crashed. Does anyone know if fire fox is
compatible with windows ten? thanks.







--
we have not sent you but as a mercy to the creation.
holy quran, chapter 21, verse 107.
in the very authentic narration is:
imam hosein is the beacon of light and the ark of salvation.
best website for studying islamic book in different languages al-islam.org


Re: nvda announcing clipboard functions and other keystrokes

Kwork
 

I used that add-on for a short while. The problem I found was that it wasn't
reliable. There were times that I'd use it, hear the announcement, only to
find that the action hadn't been true to the announcement. The add-on seems
to verify the keystroke, but doesn't wait to do so till after the action
itself has been verified. This is one small area where Jaws is still ahead.
Travis

----- Original Message -----
From: "David Griffith" <daj.griffith@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Tuesday, February 21, 2017 6:00 AM
Subject: Re: [nvda] nvda announcing clipboard functions and other keystrokes


There is an addon which makes these announcements available.


It is called Fake Clipboard announce or something like that.

You should able to find it on the addons repositary.



David Griffith

On 21/02/2017 12:32, erik burggraaf wrote:

Hi, I have to figure this out and don't have an nvda machine to poke
around on. It never used to bother me that NVDA doesn't announce cut,
copy, paste, in particular, and other functions accessible using
windows standard keys, but I've got a friend who is a new user of NVDA
and he needs some more feedback from keystrokes, particularly these
clipboard functions. Is there a setting to enable speaking for these
keys, or do I need to install an add-on for this?

Thanks,

Erik

Sent with AquaMail for Android
http://www.aqua-mail.com





Re: Reporting information about visual formattings of Web sites

Jacques <lists4js@...>
 

When checking format information of styles defined in CSS, when in your
browser, make sure you are on document layout when pressing NVDA+f. I refer
to a message I sent to this list a few days ago, asking that when in a
virtual rendered window, such as in browsers, that document review is
triggered by default when selecting text with NVDA+F9 and F10, as well as
when checking format information with NVDA+F.

Checking format info when screen review or object review is active reports
the wrong information.

The extent to which the below message is correct, is that all Windows screen
readers will report information in a top to bottom layout. This, for
example, does not give a true reflection of screen layout. A typical example
is the navigation bar which could be placed on the left side of the screen,
regardless of where one is on the page, at least, visually. According to
sscreen readers the navigation bar is always at the top. The best way to
determine actual screen layout is with a tablet, moving your finger across
the screen to see where elements are placed.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Brian
Moore
Sent: Tuesday, February 21, 2017 9:12 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Reporting information about visual formattings of Web
sites

Hi. this won't help with info in css. As far as I know, every screen
reader basically ignores css stuff.


Brian.

Contact me on skype: brian.moore
follow me on twitter:
http://www.twitter.com/bmoore123

On 02/21/2017 2:08 PM, Luke Scholey wrote:
Hi
Not sure how well it will work, but in the Preferences menu of NVDA, there
is an item labelled document formatting. In this dialogue box are checkboxes
relating to how much detail you want spoken when reading the document or
webpage. Is this similar to what you are looking for?
Hope that helped.
Regards
Luke

On 21 Feb 2017, at 20:05, Nika Tsiklauri <ntsiklauri2@gmail.com> wrote:

Hi all! I am trying to access the information related to css, such as
position of the image on the web site, if there's background image on the
page and etc. Does anyone know how to do it? I am trying to press insert+f
but it sometimes says, No formatting information. Any kind of help would be
appreciated.

Thanks in advance.




Re: Reporting information about visual formattings of Web sites

Nika Tsiklauri
 

Thanks Luke and brian.

Luke, it at some point worked for me.

Brian, I think it ignores all the divs such as if I have div displayed in center and then I have another one in that div. Such information couldn't be displayed as I was trying that.

On 21.02.2017 22:11, Brian Moore wrote:
Hi. this won't help with info in css. As far as I know, every screen reader basically ignores css stuff.


Brian.

Contact me on skype: brian.moore
follow me on twitter:
http://www.twitter.com/bmoore123

On 02/21/2017 2:08 PM, Luke Scholey wrote:
Hi
Not sure how well it will work, but in the Preferences menu of NVDA, there is an item labelled document formatting. In this dialogue box are checkboxes relating to how much detail you want spoken when reading the document or webpage. Is this similar to what you are looking for?
Hope that helped.
Regards
Luke

On 21 Feb 2017, at 20:05, Nika Tsiklauri <ntsiklauri2@gmail.com> wrote:

Hi all! I am trying to access the information related to css, such as position of the image on the web site, if there's background image on the page and etc. Does anyone know how to do it? I am trying to press insert+f but it sometimes says, No formatting information. Any kind of help would be appreciated.

Thanks in advance.





Re: Reporting information about visual formattings of Web sites

Brian Moore
 

Hi. this won't help with info in css. As far as I know, every screen reader basically ignores css stuff.


Brian.

Contact me on skype: brian.moore
follow me on twitter:
http://www.twitter.com/bmoore123

On 02/21/2017 2:08 PM, Luke Scholey wrote:
Hi
Not sure how well it will work, but in the Preferences menu of NVDA, there is an item labelled document formatting. In this dialogue box are checkboxes relating to how much detail you want spoken when reading the document or webpage. Is this similar to what you are looking for?
Hope that helped.
Regards
Luke

On 21 Feb 2017, at 20:05, Nika Tsiklauri <ntsiklauri2@gmail.com> wrote:

Hi all! I am trying to access the information related to css, such as position of the image on the web site, if there's background image on the page and etc. Does anyone know how to do it? I am trying to press insert+f but it sometimes says, No formatting information. Any kind of help would be appreciated.

Thanks in advance.




Re: NVDA tutorials posted to Accessibilitycentral.net

Gene New Zealand <hurrikennyandopo@...>
 

Hi


I just tried it and both links took me to those 2 pages where the
tutorials went to. Maybe in your email client it may be set to text for
viewing instead of html. If this is the case you will have to highlight
the link then copy and paste it into your browser. If in the emails it
is set to html the link should work and take you to those pages then it
is a matter of jumping down by headings to those sections as they have
been named in the email.


there is also another link in the email that takes you to the main
website at http://www.accessibilitycentral.net which is at the bottom of
the emails that are sent out by me and also on the nvda list.


Gene nz

On 22/02/2017 4:36 AM, Cristóbal wrote:
Your links are coming up blank for me.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene New Zealand
Sent: Tuesday, February 21, 2017 1:32 AM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA tutorials posted to Accessibilitycentral.net

Hi guys

Recently updated:
The following tutorials have been added to accessibilitycentral.net

Recently updated: Creating a basic filter in Mozilla Thunderbird (both a
written and audio tutorial on the Accessible email client Mozilla
Thunderbird page)
http://accessibilitycentral.net/accessible%20email%20client%20mozilla%20thunderbird.html

How to install NVDA to your computer using Narrator from the NVaccess
website (both a written and audio tutorial on the NVDA audio tutorials
page). http://accessibilitycentral.net/nvda%20audio%20tutorials.html

I will add more tutorials to this thread as they are written up.

Gene NZ

--
<b>Check out the new location of my accessibility central website for NVDA tutorials, NVDA road tested programs, and other eyesight related topics.
http://www.accessibilitycentral.net/ If you would like to keep up to date with whats being updated on our website, you can also follow us on facebook by visiting
the following link https://en-gb.facebook.com/people/AccessibilityCentral-Net/100009727930216
Also, check out which New Zealand libraries have the NVDA screen reader available by visiting the following link http://www.aotearoapeoplesnetwork.org/content/partner-libraries


Re: Reporting information about visual formattings of Web sites

Luke Scholey <lukescholey@...>
 

Hi
Not sure how well it will work, but in the Preferences menu of NVDA, there is an item labelled document formatting. In this dialogue box are checkboxes relating to how much detail you want spoken when reading the document or webpage. Is this similar to what you are looking for?
Hope that helped.
Regards
Luke

On 21 Feb 2017, at 20:05, Nika Tsiklauri <ntsiklauri2@gmail.com> wrote:

Hi all! I am trying to access the information related to css, such as position of the image on the web site, if there's background image on the page and etc. Does anyone know how to do it? I am trying to press insert+f but it sometimes says, No formatting information. Any kind of help would be appreciated.

Thanks in advance.




Re: NVDA tutorials posted to Accessibilitycentral.net

Luke Scholey <lukescholey@...>
 

And for me, could you check your web address please?
Luke

On 21 Feb 2017, at 15:36, Cristóbal <crismunoz54@gmail.com> wrote:

Your links are coming up blank for me.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene New Zealand
Sent: Tuesday, February 21, 2017 1:32 AM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA tutorials posted to Accessibilitycentral.net

Hi guys

Recently updated:
The following tutorials have been added to accessibilitycentral.net

Recently updated: Creating a basic filter in Mozilla Thunderbird (both a
written and audio tutorial on the Accessible email client Mozilla
Thunderbird page)
http://accessibilitycentral.net/accessible%20email%20client%20mozilla%20thunderbird.html

How to install NVDA to your computer using Narrator from the NVaccess
website (both a written and audio tutorial on the NVDA audio tutorials
page). http://accessibilitycentral.net/nvda%20audio%20tutorials.html

I will add more tutorials to this thread as they are written up.

Gene NZ


--

<b>Check out the new location of my accessibility central website for
NVDA tutorials, NVDA road tested programs, and other eyesight related
topics.
http://www.accessibilitycentral.net/ If you would like to keep up to
date with whats being updated on our website, you can also follow us on
facebook by visiting
the following link
https://en-gb.facebook.com/people/AccessibilityCentral-Net/100009727930216
Also, check out which New Zealand libraries have the NVDA screen reader
available by visiting the following link
http://www.aotearoapeoplesnetwork.org/content/partner-libraries








Reporting information about visual formattings of Web sites

Nika Tsiklauri
 

Hi all! I am trying to access the information related to css, such as position of the image on the web site, if there's background image on the page and etc. Does anyone know how to do it? I am trying to press insert+f but it sometimes says, No formatting information. Any kind of help would be appreciated.

Thanks in advance.


Re: Does firefox work with windows ten?

Brian's Mail list account <bglists@...>
 

Most modern copies of firefox allw you to run not run or ask to run on most content processing add ons now, as part of the add on manager dialogue.


Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "nasrin khaksar" <nasrinkhaksar3@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Tuesday, February 21, 2017 5:42 PM
Subject: Re: [nvda] Does firefox work with windows ten?


hi again.
for security reasons and avoide system infected by malicious flash
content,type about:config in addresss press enter twice.
in the search box peist plugin.state.flash
press enter on it.
delete its number which is 2 by default.
type 1 instead of 2 and press enter to work.
because 2 means its activate by default.
but when you change it in to 1, it asks from users whether open flash
content or not.
when its not loaded automaticly, it helps you to increase your
security very much.
hope that helps and God bless you!

On 2/21/17, Arlene <nedster66@gmail.com> wrote:
Oh okay, This sighted person watches the Young and the Restless on this one
site using firefox.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Shaun
Everiss
Sent: February-20-17 10:39 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Does firefox work with windows ten?

Flash crashes a lot on firefox but firefox, google and others are actively
discouraging insecure flash though I still have it on systems because it is
still used.
Most sites like youtube use html5 now which is the new standard and which
firefox supports.



On 21/02/2017 7:23 p.m., Simon Jaeger wrote:
Hi,
Firstly, Firefox is actively being developed for Windows so I'm not
sure why anyone would think it doesn't work with Windows 10. I run it
myself and it's as stable here as it was on Windows xp. The issue
seems to involve Adobe Flash specifically, so it's a little more
complicated than just asking if Firefox works. I personally don't have
Flash and don't have any intention of installing it. I have seen it
crash in many places for many years, and there have always been
problems between Flash and Firefox as far back as the XP days. So
Firefox may work fine, and Adobe Flash may work perfectly for some
websites, but I'm not sure what to suggest if your friend is hell bent
on using Firefox for this particular site. I can tell you that it
probably has very little to do with Firefox, and may not even be
related to Windows 10. Sometimes, we just have to conclude that
certain sites and browsers don't get along. Google Chrome is pretty
awesome if the friend doesn't like IE.

Simon

On 2017-02-20 21:56, Arlene wrote:

Hi list: Arlene here! I have a sighted friend who's determined to
make fire fox work with her win ten computer. She will not listen to
me when I tell her it does not work. This is spasifically for
Canadians to try this site with win ten and firefox.

www.globaltv.com <http://www.globaltv.com>

And watches the young nd the restless, she gets a message stating
that adobe flash player has crashed. Does anyone know if fire fox is
compatible with windows ten? thanks.







--
we have not sent you but as a mercy to the creation.
holy quran, chapter 21, verse 107.
in the very authentic narration is:
imam hosein is the beacon of light and the ark of salvation.
best website for studying islamic book in different languages
al-islam.org