Date   

Re: NVDA remote

Webmaster Deweer <webmaster_deweer@...>
 

Hello,

Very simple!

-        On the computer that will be remotely controlled:

1.    Open de NVDA Menu (NVDA+N)

2.    Go to Extra > Remote Access > Connect…

3.    First thing to do, set the radiobutton on client

4.    Press TAB and set it to Let be controlled this computer (or anything like this)

5.    Type in the textbox www.nvdaremote.com

6.    In the last textbox type a key, or press the button to generate one for you

-        On the computer that controls the other pc

1.    Do the same steps as above this from 1 to 3

2.    Press TAB and set the radiobutton on Control another computer

3.    Press tab and type in the textbox www.nvdaremote.com

4.    Press tab and type the same key as set in the pc that’ll be controlled!

-        Press on both computers on OK / Connect

You’ll hear a beep and the computers are connected. From the pc that conrols the other machine, press F11 to send your keyboardcommands to the other pc and press F11 again to stop sending the keys.

 

To disconnect go to the NVDA Menu (Ins+N) > Extra > Remote access > Disconnect

You’ll hear some beeps again!

 

Is that clear for you?

 

Best regards, Jordy

 

 

 

Van: Supanut Leepaisomboon [mailto:supanut2000@...]
Verzonden: donderdag 28 april 2016 15:46
Aan: nvda@nvda.groups.io
Onderwerp: [nvda] NVDA remote

 

Hi,

So, I installed the remote add on, but I'm clueless on how to get started using it, mainly configuring the host name and key, and how to allow a computer to be controlled.

How do I configure the add on to enable remote functionality?


NVDA remote

 

Hi,

So, I installed the remote add on, but I'm clueless on how to get started using it, mainly configuring the host name and key, and how to allow a computer to be controlled.

How do I configure the add on to enable remote functionality?


Re: NVDA skype group

Leo Bado <leobado1970@...>
 

that would be awsome!

El 28/04/2016 a las 06:24 a.m., Angela Delicata via Groups.io escribió:
Why not creating a WhatsApp group?
Thank you.
Angela from Italy


Il 28/04/2016 12:55, Kevin Cussick via Groups.io ha scritto:
I could not seem to join I opened the url in ff and I think I hit the
join button, got a message saying if your not getting anything
happening click the web link I did and it seemed to join me but I don't
see anything in my skype contacts thanks in advance for any advice given.

On 27/04/2016 23:50, laura cornwell wrote:
Hey there, to all on thislist we have a skype group createdfor people
who just wants to talk about NVDA or who needs help withNVDAhears a link
that you can use to joine Brandon Cross:
https://join.skype.com/yuhmuyVSlmRT




---
Questa e-mail è stata controllata per individuare virus con Avast antivirus.
https://www.avast.com/antivirus


--
“If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music he hears, however measured or far away.”
― Henry David Thoreau


Re: NVDA skype group

Angela Delicata
 

Why not creating a WhatsApp group?
Thank you.
Angela from Italy


Il 28/04/2016 12:55, Kevin Cussick via Groups.io ha scritto:
I could not seem to join I opened the url in ff and I think I hit the
join button, got a message saying if your not getting anything
happening click the web link I did and it seemed to join me but I don't
see anything in my skype contacts thanks in advance for any advice given.

On 27/04/2016 23:50, laura cornwell wrote:
Hey there, to all on thislist we have a skype group createdfor people
who just wants to talk about NVDA or who needs help withNVDAhears a link
that you can use to joine Brandon Cross:
https://join.skype.com/yuhmuyVSlmRT



---
Questa e-mail è stata controllata per individuare virus con Avast antivirus.
https://www.avast.com/antivirus


Re: NVDA skype group

Kevin Cussick
 

I could not seem to join I opened the url in ff and I think I hit the join button, got a message saying if your not getting anything happening click the web link I did and it seemed to join me but I don't see anything in my skype contacts thanks in advance for any advice given.

On 27/04/2016 23:50, laura cornwell wrote:
Hey there, to all on thislist we have a skype group createdfor people
who just wants to talk about NVDA or who needs help withNVDAhears a link
that you can use to joine Brandon Cross:
https://join.skype.com/yuhmuyVSlmRT



Re: duplicate messages

Brian's Mail list account BY <bglists@...>
 

Well, as I say, it sounds like its Google mail. If you look at the list email does it seem that its actually coming from you not the list?
Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "slery" <slerythema@...>
To: <nvda@nvda.groups.io>
Sent: Thursday, April 28, 2016 7:09 AM
Subject: Re: [nvda] duplicate messages


I am using AquaMail on my android phone and outlook 2013 on my desktop.


-----Original Message-----
From: Brian's Mail list account [mailto:bglists@...]
Sent: Wednesday, April 27, 2016 6:14 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] duplicate messages

I guess a look at the message source might give a reason. its hard to advise without seeing the messages. it has to be something in the email software being used to receive messages or we would all have the problem.
Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "slery" <slerythema@...>
To: <nvda@nvda.groups.io>
Sent: Tuesday, April 26, 2016 5:25 PM
Subject: Re: [nvda] duplicate messages


Dexter Not Duplicate threat it is the exact same message twice but it does
not happen on every single message but almost every other message that I
get a duplicate from the same person with the same message

Sent with AquaMail for Android
http://www.aqua-mail.com


On April 25, 2016 11:26:59 PM "Robert Mendoza" <lowvisiontek@...>
wrote:

I would assume that she is receiving multiple messages with one subject
line. But, again it really depend on the others users how they responded
, instead of using one email thread. to avoid cluttering into inbox. Or,
I would say that the said email recipients has this type of norms is
being setup.

Robert Mendoza

On 4/26/2016 11:08 AM, Brian Vogel wrote:

Cindy,

Can you be more specific with regard to which messages and
topics? I had been seeing quite a few on this group, and started a
thread dedicated to some of the reasons they might be occurring
<https://nvda.groups.io/g/nvda/thread/likely_reasons_for/1067760?p=,,,50,0,0,0:RecentPostDate%2FSticky,,,50,2,0,1067760>,
but that has died down quite a bit since it was at it's peak a about 5
or 6 days ago. I haven't seen any over the last several days.

*/Brian/*
--
*The demagogue is one who preaches doctrines he knows to be untrue to
men he knows to be idiots.*
~ /H.L. Mencken/



Important (reply offlist please): NVDACon International 2016/Tenth Anniversary Edition: second half, invitation to attend keynote presentation

 

Ladies and gentlemen,

 

This is Joseph Lee, the chair of the NVDA tenth anniversary planning committee. I’d like to give you some status report on happenings at NVDACon 2016 and to cordially invite you to join us for the second half of this conference.

 

So far, the conference attendees had a chance to meet authors of their favorite add-ons, learned how awareness of NVDA makes a difference in workplaces, got a sneak preview of Dictation Bridge and more. We also heard from people such as Sean Randall, Dave Williams and others, as well as to chat with Fernando and mark, the developers of F123 Access, as well as to get a glimpse of what’s involved when writing NVDA add-ons.

 

But the conference doesn’t stop there: the second half is just a few hours away, and the second part starts with an introductory session on NVDA for those using other screen readers. Following that, we’ll have an exciting session on NVDA’s support for math, get a chance to learn about braille support and get a chance to talk to the gentlemen behind NVDA’s inception and history (Michael Curran and James Teh) as part of the keynote presentation.

 

For more information on this conference, as well as learn how to join us and listen to past conference sessions (including ones hosted last weekend such as F123 Access and Dictation Bridge), please visit http://www.nvda-kr.org/en/nvdacon.php.

 

Of these sessions, I’d like to cordially invite you to attend the keynote session, to be held on April 30, 2016 at 00:00 UTC (5 PM Pacific on the 29th, 8 PM Eastern and elsewhere).

 

If you have any questions about this conference, please write to me directly at joseph.lee22590@.... Hope to see many of you at the second half of NVDACon, especially the keynote session.

 

P.S. I’ll leave you with a promo on NVDA as a movement:

http://www.nvda-kr.org/files/NVDASR%20movement%20promo.mp3

 

Thanks.

Cheers,

Joseph


Re: duplicate messages

slery <slerythema@...>
 

I am using AquaMail on my android phone and outlook 2013 on my desktop.

-----Original Message-----
From: Brian's Mail list account [mailto:bglists@...]
Sent: Wednesday, April 27, 2016 6:14 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] duplicate messages

I guess a look at the message source might give a reason. its hard to advise without seeing the messages. it has to be something in the email software being used to receive messages or we would all have the problem.
Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "slery" <slerythema@...>
To: <nvda@nvda.groups.io>
Sent: Tuesday, April 26, 2016 5:25 PM
Subject: Re: [nvda] duplicate messages


Dexter Not Duplicate threat it is the exact same message twice but it does
not happen on every single message but almost every other message that I
get a duplicate from the same person with the same message

Sent with AquaMail for Android
http://www.aqua-mail.com


On April 25, 2016 11:26:59 PM "Robert Mendoza" <lowvisiontek@...>
wrote:

I would assume that she is receiving multiple messages with one subject
line. But, again it really depend on the others users how they responded
, instead of using one email thread. to avoid cluttering into inbox. Or,
I would say that the said email recipients has this type of norms is
being setup.

Robert Mendoza

On 4/26/2016 11:08 AM, Brian Vogel wrote:

Cindy,

Can you be more specific with regard to which messages and
topics? I had been seeing quite a few on this group, and started a
thread dedicated to some of the reasons they might be occurring
<https://nvda.groups.io/g/nvda/thread/likely_reasons_for/1067760?p=,,,50,0,0,0:RecentPostDate%2FSticky,,,50,2,0,1067760>,
but that has died down quite a bit since it was at it's peak a about 5
or 6 days ago. I haven't seen any over the last several days.

*/Brian/*
--
*The demagogue is one who preaches doctrines he knows to be untrue to
men he knows to be idiots.*
~ /H.L. Mencken/



Re: NVDA skype group

 

Ok I have joined the skype group.
well now we have one of those to its good to expand our communications.
We should add this group with all our other community groups for nvda, win10 and its subs etc to the community pages under lists or groups or something I don't know but we should add all these things somewhere.

On 28/04/2016 11:54 a.m., Brandon Cross wrote:
We've got some early members, nice to see and welcome to them.

On 4/27/2016 7:02 PM, Brandon Cross wrote:
Indeed, this is the case, I am the creator of said group.

The intention is for those in need of help to get that help from those
who choose to volunteer. Mainly you, the users who need help we are
willing and ready to help.

The group is a jumping off point, I would imagine most situations
requiring voice calls and that can be done as well. can also be
used if you'd like to get help over that rather than skype call.

The rules are simple, just be respectful to one another and don't
troll or spam. There are two mods and if you want to know who is who
you can type /getmembers in the chat to find out. If one of us asks
you to desist from a behavior, please do so immediately. We don't wish
to resort to bans, kicks or anything of the like, let's all be
civilized. OK good that's out of the way.

If you'd like to jjoin the group, the link is :
https://join.skype.com/yuhmuyVSlmRT

Thanks and hope to see some new members.
-Brandon Cross

On 4/27/2016 6:50 PM, laura cornwell wrote:
Hey there, to all on thislist we have a skype group createdfor people
who just wants to talk about NVDA or who needs help withNVDAhears a
link that you can use to joine Brandon Cross:
https://join.skype.com/yuhmuyVSlmRT








Re: NVDA skype group

Brandon Cross <bcross3286@...>
 

We've got some early members, nice to see and welcome to them.

On 4/27/2016 7:02 PM, Brandon Cross wrote:
Indeed, this is the case, I am the creator of said group.

The intention is for those in need of help to get that help from those who choose to volunteer. Mainly you, the users who need help we are willing and ready to help.

The group is a jumping off point, I would imagine most situations requiring voice calls and that can be done as well. can also be used if you'd like to get help over that rather than skype call.

The rules are simple, just be respectful to one another and don't troll or spam. There are two mods and if you want to know who is who you can type /getmembers in the chat to find out. If one of us asks you to desist from a behavior, please do so immediately. We don't wish to resort to bans, kicks or anything of the like, let's all be civilized. OK good that's out of the way.

If you'd like to jjoin the group, the link is : https://join.skype.com/yuhmuyVSlmRT

Thanks and hope to see some new members.
-Brandon Cross

On 4/27/2016 6:50 PM, laura cornwell wrote:
Hey there, to all on thislist we have a skype group createdfor people who just wants to talk about NVDA or who needs help withNVDAhears a link that you can use to joine Brandon Cross: https://join.skype.com/yuhmuyVSlmRT





Re: NVDA skype group

Brandon Cross <bcross3286@...>
 

Indeed, this is the case, I am the creator of said group.

The intention is for those in need of help to get that help from those who choose to volunteer. Mainly you, the users who need help we are willing and ready to help.

The group is a jumping off point, I would imagine most situations requiring voice calls and that can be done as well. can also be used if you'd like to get help over that rather than skype call.

The rules are simple, just be respectful to one another and don't troll or spam. There are two mods and if you want to know who is who you can type /getmembers in the chat to find out. If one of us asks you to desist from a behavior, please do so immediately. We don't wish to resort to bans, kicks or anything of the like, let's all be civilized. OK good that's out of the way.

If you'd like to jjoin the group, the link is : https://join.skype.com/yuhmuyVSlmRT

Thanks and hope to see some new members.
-Brandon Cross

On 4/27/2016 6:50 PM, laura cornwell wrote:
Hey there, to all on thislist we have a skype group createdfor people who just wants to talk about NVDA or who needs help withNVDAhears a link that you can use to joine Brandon Cross: https://join.skype.com/yuhmuyVSlmRT



NVDA skype group

lauracornwell <lauracornwell1@...>
 

Hey there, to all on thislist we have a skype group createdfor people who just wants to talk about NVDA or who needs help withNVDAhears a link that you can use to joine Brandon Cross: https://join.skype.com/yuhmuyVSlmRT


Re: NVA ignoring aria-hidden in IE 11 and Edge

Gene
 

I was pointing this out because you may be reading messages out of sequence in general and that may cause you annoyance and make threads unnecessarily difficult to follow.
 
Gene

----- Original Message -----
From: Arlene
Sent: Wednesday, April 27, 2016 1:06 PM
Subject: Re: [nvda] NVA ignoring aria-hidden in IE 11 and Edge

Yeah, I read thenewest first. Sorry about that.

 

From: Gene [mailto:gsasner@...]
Sent: April-27-16 10:49 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVA ignoring aria-hidden in IE 11 and Edge

 

Do you read messages from newest to oldest?  If sso, you will answer messages out of sequence and not read them in logical order.  I'm asking because you appear to have read my second message first. 

 

Gene

----- Original Message -----

From: Arlene

Sent: Wednesday, April 27, 2016 12:33 PM

Subject: Re: [nvda] NVA ignoring aria-hidden in IE 11 and Edge

 

Well, I thought so. Cause I know ten has a few bugs here and there.

 

From: Gene [mailto:gsasner@...]
Sent: April-27-16 10:27 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVA ignoring aria-hidden in IE 11 and Edge

 

yes, since Edge is not available in any earlier versions of Windows.

 

Gene

----- Original Message -----

From: Arlene

Sent: Wednesday, April 27, 2016 12:19 PM

Subject: Re: [nvda] NVA ignoring aria-hidden in IE 11 and Edge

 

Hi, is this for windows ten?

 

From: grady.mcghee@... [mailto:grady.mcghee@...]
Sent: April-27-16 4:36 AM
To: nvda@nvda.groups.io
Subject: [nvda] NVA ignoring aria-hidden in IE 11 and Edge

 

It appears to be isolated when NVDA is using IE or Edge as I am not having this in Chrome.

 

Here is my code for our HTML5 video player:

 

            <video id="view-video" controls>

                <source src="#" type="#">

                <span aria-hidden="true">Your browser does not support the video tag.</span>

            </video>

 

Despite putting a <span> with an aria-hidden=”true”, NVDA will still read “Your browser does not support the video tag.” while the video is loading.  Once the video is loaded, it will play.  For some reason when using IE, NVDA will not ignore that text.  It does not read it when using Chrome nor does VoiceOver read it. Is this an old bug that didn;t get fully fixed. I remember an issue aria-hidden in NVDA 2014 but thought is was fixed in 2015.


Re: Changing from espeak?

Chris Shook <chris0309@...>
 

Brian,
Which Espeak voice do you prefer?
Thanks
Chris


Re: Changing from espeak?

Brian's Mail list account BY <bglists@...>
 

Yes indeed, I think there are almost as meny Espeak lovers as haters. and as has been said many times, the voice one usees is very very personal. Just listen to the range on some of the cool blind tech podcasts to hear this.

My position however is that the current default for new users seems to be not really that good. I'd aim for one with a deeper less sing song delivery myself, but then I'm UK English and that may well not be valid elsewhere.
Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Gene" <gsasner@...>
To: <nvda@nvda.groups.io>
Sent: Wednesday, April 27, 2016 5:50 PM
Subject: Re: [nvda] Changing from espeak?


No one said E-Speak would no longer be used. List members were simply expressing their opinions concerning E-Speak and whether it should be used..

Gene


From: Sharni-Lee Ward
Sent: Wednesday, April 27, 2016 11:20 AM
To: nvda@nvda.groups.io
Subject: [nvda] Changing from espeak?


I've been out of the loop for a bit due to emails piling up and then
Outlook being a pain (which eventually led to me getting Thunderbird
just so I could access my emails). So, what's this about NVDA switching
from espeak to something else? I love espeak! Certainly a great deal
better than most synths I've heard, even the ones based on human voices!
The inflection is wonderful and I'm so used to it...will I have to redo
all my speech dictionaries? Will my ProTalker addon that I got so I
could learn Japanese again still work with this alteration? I don't
understand...


Re: NVA ignoring aria-hidden in IE 11 and Edge

Arlene
 

Yeah, I read thenewest first. Sorry about that.

 

From: Gene [mailto:gsasner@...]
Sent: April-27-16 10:49 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVA ignoring aria-hidden in IE 11 and Edge

 

Do you read messages from newest to oldest?  If sso, you will answer messages out of sequence and not read them in logical order.  I'm asking because you appear to have read my second message first. 

 

Gene

----- Original Message -----

From: Arlene

Sent: Wednesday, April 27, 2016 12:33 PM

Subject: Re: [nvda] NVA ignoring aria-hidden in IE 11 and Edge

 

Well, I thought so. Cause I know ten has a few bugs here and there.

 

From: Gene [mailto:gsasner@...]
Sent: April-27-16 10:27 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVA ignoring aria-hidden in IE 11 and Edge

 

yes, since Edge is not available in any earlier versions of Windows.

 

Gene

----- Original Message -----

From: Arlene

Sent: Wednesday, April 27, 2016 12:19 PM

Subject: Re: [nvda] NVA ignoring aria-hidden in IE 11 and Edge

 

Hi, is this for windows ten?

 

From: grady.mcghee@... [mailto:grady.mcghee@...]
Sent: April-27-16 4:36 AM
To: nvda@nvda.groups.io
Subject: [nvda] NVA ignoring aria-hidden in IE 11 and Edge

 

It appears to be isolated when NVDA is using IE or Edge as I am not having this in Chrome.

 

Here is my code for our HTML5 video player:

 

            <video id="view-video" controls>

                <source src="#" type="#">

                <span aria-hidden="true">Your browser does not support the video tag.</span>

            </video>

 

Despite putting a <span> with an aria-hidden=”true”, NVDA will still read “Your browser does not support the video tag.” while the video is loading.  Once the video is loaded, it will play.  For some reason when using IE, NVDA will not ignore that text.  It does not read it when using Chrome nor does VoiceOver read it. Is this an old bug that didn;t get fully fixed. I remember an issue aria-hidden in NVDA 2014 but thought is was fixed in 2015.


Re: NVA ignoring aria-hidden in IE 11 and Edge

Gene
 

Do you read messages from newest to oldest?  If sso, you will answer messages out of sequence and not read them in logical order.  I'm asking because you appear to have read my second message first. 
 
Gene

----- Original Message -----
From: Arlene
Sent: Wednesday, April 27, 2016 12:33 PM
Subject: Re: [nvda] NVA ignoring aria-hidden in IE 11 and Edge

Well, I thought so. Cause I know ten has a few bugs here and there.

 

From: Gene [mailto:gsasner@...]
Sent: April-27-16 10:27 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVA ignoring aria-hidden in IE 11 and Edge

 

yes, since Edge is not available in any earlier versions of Windows.

 

Gene

----- Original Message -----

From: Arlene

Sent: Wednesday, April 27, 2016 12:19 PM

Subject: Re: [nvda] NVA ignoring aria-hidden in IE 11 and Edge

 

Hi, is this for windows ten?

 

From: grady.mcghee@... [mailto:grady.mcghee@...]
Sent: April-27-16 4:36 AM
To: nvda@nvda.groups.io
Subject: [nvda] NVA ignoring aria-hidden in IE 11 and Edge

 

It appears to be isolated when NVDA is using IE or Edge as I am not having this in Chrome.

 

Here is my code for our HTML5 video player:

 

            <video id="view-video" controls>

                <source src="#" type="#">

                <span aria-hidden="true">Your browser does not support the video tag.</span>

            </video>

 

Despite putting a <span> with an aria-hidden=”true”, NVDA will still read “Your browser does not support the video tag.” while the video is loading.  Once the video is loaded, it will play.  For some reason when using IE, NVDA will not ignore that text.  It does not read it when using Chrome nor does VoiceOver read it. Is this an old bug that didn;t get fully fixed. I remember an issue aria-hidden in NVDA 2014 but thought is was fixed in 2015.


Re: NVA ignoring aria-hidden in IE 11 and Edge

Gene
 

I didn't ask what version of Windows you are using.  I responded to your question about whether the reported problem was found in Windows 10 and I gave my guess about the versions of Windows it will be found in.. 
 
Gene

----- Original Message -----
From: Arlene
Sent: Wednesday, April 27, 2016 12:33 PM
Subject: Re: [nvda] NVA ignoring aria-hidden in IE 11 and Edge

Yes, I’m using windows 7.

 

From: Gene [mailto:gsasner@...]
Sent: April-27-16 10:30 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVA ignoring aria-hidden in IE 11 and Edge

 

I should have said that I would expect that this is in Windows 10 because Edge is not available in earlier versions of Windows.  It appears now that the problem may exist in Internet Explorer regardless of version of Windows. 

However, this has evidently not been tested in Windows 8.

 

Gene

Sent: Wednesday, April 27, 2016 12:21 PM

Subject: Re: [nvda] NVA ignoring aria-hidden in IE 11 and Edge

 

It was tested on Windows 7 at work and Widows 10 at home on computer.
 

 

 

On 04/27/16, Arlene<NEDSTER66@GMAIL.com></NEDSTER66@ wrote:

 

Hi, is this for windows ten?

 

From: grady.mcghee@... [mailto:grady.mcghee@...]
Sent: April-27-16 4:36 AM
To: nvda@nvda.groups.io
Subject: [nvda] NVA ignoring aria-hidden in IE 11 and Edge

 

It appears to be isolated when NVDA is using IE or Edge as I am not having this in Chrome.

 

Here is my code for our HTML5 video player:

 

            <video id="view-video" controls>

                src="#" type="#">

                aria-hidden="true">Your browser does not support the video tag.

            </video>

 

Despite putting a with an aria-hidden=”true”, NVDA will still read “Your browser does not support the video tag.” while the video is loading.  Once the video is loaded, it will play.  For some reason when using IE, NVDA will not ignore that text.  It does not read it when using Chrome nor does VoiceOver read it. Is this an old bug that didn;t get fully fixed. I remember an issue aria-hidden in NVDA 2014 but thought is was fixed in 2015.


Re: NVA ignoring aria-hidden in IE 11 and Edge

Arlene
 

Well, I thought so. Cause I know ten has a few bugs here and there.

 

From: Gene [mailto:gsasner@...]
Sent: April-27-16 10:27 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVA ignoring aria-hidden in IE 11 and Edge

 

yes, since Edge is not available in any earlier versions of Windows.

 

Gene

----- Original Message -----

From: Arlene

Sent: Wednesday, April 27, 2016 12:19 PM

Subject: Re: [nvda] NVA ignoring aria-hidden in IE 11 and Edge

 

Hi, is this for windows ten?

 

From: grady.mcghee@... [mailto:grady.mcghee@...]
Sent: April-27-16 4:36 AM
To: nvda@nvda.groups.io
Subject: [nvda] NVA ignoring aria-hidden in IE 11 and Edge

 

It appears to be isolated when NVDA is using IE or Edge as I am not having this in Chrome.

 

Here is my code for our HTML5 video player:

 

            <video id="view-video" controls>

                <source src="#" type="#">

                <span aria-hidden="true">Your browser does not support the video tag.</span>

            </video>

 

Despite putting a <span> with an aria-hidden=”true”, NVDA will still read “Your browser does not support the video tag.” while the video is loading.  Once the video is loaded, it will play.  For some reason when using IE, NVDA will not ignore that text.  It does not read it when using Chrome nor does VoiceOver read it. Is this an old bug that didn;t get fully fixed. I remember an issue aria-hidden in NVDA 2014 but thought is was fixed in 2015.


Re: NVA ignoring aria-hidden in IE 11 and Edge

Arlene
 

Yes, I’m using windows 7.

 

From: Gene [mailto:gsasner@...]
Sent: April-27-16 10:30 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVA ignoring aria-hidden in IE 11 and Edge

 

I should have said that I would expect that this is in Windows 10 because Edge is not available in earlier versions of Windows.  It appears now that the problem may exist in Internet Explorer regardless of version of Windows. 

However, this has evidently not been tested in Windows 8.

 

Gene

Sent: Wednesday, April 27, 2016 12:21 PM

Subject: Re: [nvda] NVA ignoring aria-hidden in IE 11 and Edge

 

It was tested on Windows 7 at work and Widows 10 at home on computer.
 

 

 

On 04/27/16, Arlene<NEDSTER66@GMAIL.com></NEDSTER66@ wrote:

 

Hi, is this for windows ten?

 

From: grady.mcghee@... [mailto:grady.mcghee@...]
Sent: April-27-16 4:36 AM
To: nvda@nvda.groups.io
Subject: [nvda] NVA ignoring aria-hidden in IE 11 and Edge

 

It appears to be isolated when NVDA is using IE or Edge as I am not having this in Chrome.

 

Here is my code for our HTML5 video player:

 

            <video id="view-video" controls>

                src="#" type="#">

                aria-hidden="true">Your browser does not support the video tag.

            </video>

 

Despite putting a with an aria-hidden=”true”, NVDA will still read “Your browser does not support the video tag.” while the video is loading.  Once the video is loaded, it will play.  For some reason when using IE, NVDA will not ignore that text.  It does not read it when using Chrome nor does VoiceOver read it. Is this an old bug that didn;t get fully fixed. I remember an issue aria-hidden in NVDA 2014 but thought is was fixed in 2015.