Date   

Re: problem with thunderbird and NVDA

Rosemarie Chavarria
 

Hi, Roger,

I do have typed characters turned on so I don't know why this is happening. I'm using outlook to reply to this message.

Rosemarie

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Roger Stewart
Sent: Saturday, June 25, 2016 8:35 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] problem with thunderbird and NVDA

Very strange. I'm replying to you using Thunderbird and all my keystrokes are speaking as I type. Do you have speak typed characters turned on? That's about the only thing I can think of. Try nvda key plus number row 2 and check that this is turned on. Hope this fixes it but that's all I can think of. It's working fine here.

Roger









On 6/25/2016 10:29 PM, Rosemarie Chavarria wrote:
Hi, Robert,


I don't have any add-ons installed. I tried restarting the email
program and that didn't help either. NVDA isn't speaking the letters
out as I'm typing this. I don't know what else to do except go back to
outlook. I like thunderbird better because messages are read out
automatically.

r

osemarie




On 6/25/2016 5:30 PM, Robert Mendoza wrote:
I don't think that nvda causes of the problem. I may ask if you have
installed addons for your Thunderbird. And, secondly did you try to
restart the email client program just to have a fine tune. Typically,
this steps of basic troubleshooting will somehow solved your problem.
Then, let us know what happened after checking.

Robert Mendoza



On 6/26/2016 12:56 AM, Rosemarie Chavarria wrote:
Hi, everyone,


I'm trying thunderbird again but here's the problem I'm having with
it. It's not working too well now with NVDA like it did before. Now
I have to alt tab to get back to the inbox after writing a message
or replying. NVDA crashes with it. What could be going on?


Thanks for your help in advance.


Rosemarie











Re: problem with thunderbird and NVDA

Roger Stewart
 

Very strange. I'm replying to you using Thunderbird and all my keystrokes are speaking as I type. Do you have speak typed characters turned on? That's about the only thing I can think of. Try nvda key plus number row 2 and check that this is turned on. Hope this fixes it but that's all I can think of. It's working fine here.

Roger

On 6/25/2016 10:29 PM, Rosemarie Chavarria wrote:
Hi, Robert,


I don't have any add-ons installed. I tried restarting the email program and that didn't help either. NVDA isn't speaking the letters out as I'm typing this. I don't know what else to do except go back to outlook. I like thunderbird better because messages are read out automatically.

r

osemarie




On 6/25/2016 5:30 PM, Robert Mendoza wrote:
I don't think that nvda causes of the problem. I may ask if you have installed addons for your Thunderbird. And, secondly did you try to restart the email client program just to have a fine tune. Typically, this steps of basic troubleshooting will somehow solved your problem. Then, let us know what happened after checking.

Robert Mendoza



On 6/26/2016 12:56 AM, Rosemarie Chavarria wrote:
Hi, everyone,


I'm trying thunderbird again but here's the problem I'm having with it. It's not working too well now with NVDA like it did before. Now I have to alt tab to get back to the inbox after writing a message or replying. NVDA crashes with it. What could be going on?


Thanks for your help in advance.


Rosemarie










Re: problem with thunderbird and NVDA

Rosemarie Chavarria
 

Hi, Robert,


I don't have any add-ons installed. I tried restarting the email program and that didn't help either. NVDA isn't speaking the letters out as I'm typing this. I don't know what else to do except go back to outlook. I like thunderbird better because messages are read out automatically.

r

osemarie

On 6/25/2016 5:30 PM, Robert Mendoza wrote:
I don't think that nvda causes of the problem. I may ask if you have installed addons for your Thunderbird. And, secondly did you try to restart the email client program just to have a fine tune. Typically, this steps of basic troubleshooting will somehow solved your problem. Then, let us know what happened after checking.

Robert Mendoza



On 6/26/2016 12:56 AM, Rosemarie Chavarria wrote:
Hi, everyone,


I'm trying thunderbird again but here's the problem I'm having with it. It's not working too well now with NVDA like it did before. Now I have to alt tab to get back to the inbox after writing a message or replying. NVDA crashes with it. What could be going on?


Thanks for your help in advance.


Rosemarie







Re: problem with thunderbird and NVDA

Robert Mendoza
 

I don't think that nvda causes of the problem. I may ask if you have installed addons for your Thunderbird. And, secondly did you try to restart the email client program just to have a fine tune. Typically, this steps of basic troubleshooting will somehow solved your problem. Then, let us know what happened after checking.

Robert Mendoza

On 6/26/2016 12:56 AM, Rosemarie Chavarria wrote:
Hi, everyone,


I'm trying thunderbird again but here's the problem I'm having with it. It's not working too well now with NVDA like it did before. Now I have to alt tab to get back to the inbox after writing a message or replying. NVDA crashes with it. What could be going on?


Thanks for your help in advance.


Rosemarie





Re: problem with thunderbird and NVDA

Ben J. Bloomgren
 

'I'll add another witness account to this in saying that I'm not seeing any of this, be it in Jaws or NVDA.


Ben

On 6/25/2016 9:56, Rosemarie Chavarria wrote:
Hi, everyone,


I'm trying thunderbird again but here's the problem I'm having with it. It's not working too well now with NVDA like it did before. Now I have to alt tab to get back to the inbox after writing a message or replying. NVDA crashes with it. What could be going on?


Thanks for your help in advance.


Rosemarie





Re: problem with thunderbird and NVDA

Kenny Dog <hurrikennyandopo@...>
 

Hi


I do not see any problems like that either. Maybe it could be opening in
a new tab or it might be the page layout I guess you really would have
to see what it is doing.


I am using thunderbird with windows 10 and it is going good for me no
problems here.


A while ago I did put together a page that may help you with
thunderbird. it can be found at
http://www.accessibilitycentral.net/accessible%20email%20client%20mozilla%20thunderbird.html


They are pretty much the settings I use here as well as a few others.

Now and again I have either helped sus out what is happening using the
remote support add on if they have it on there machine or over the
phone, but this is more in my own country.
That way at times you can hear what is going on.

Gene nz

On 26/06/2016 4:56 AM, Rosemarie Chavarria wrote:
Hi, everyone,


I'm trying thunderbird again but here's the problem I'm having with
it. It's not working too well now with NVDA like it did before. Now I
have to alt tab to get back to the inbox after writing a message or
replying. NVDA crashes with it. What could be going on?


Thanks for your help in advance.


Rosemarie





--
Check out my website for nvda tutorials and other blindness related material at http://www.accessibilitycentral.net


Re: problem with thunderbird and NVDA

Kenny Dog <hurrikennyandopo@...>
 

Hi


I do not see any problems like that either. Maybe it could be opening in
a new tab or it might be the page layout I guess you really would have
to see what it is doing.


I am using thunderbird with windows 10 and it is going good for me no
problems here.


A while ago I did put together a page that may help you with
thunderbird. it can be found at
http://www.accessibilitycentral.net/accessible%20email%20client%20mozilla%20thunderbird.html


They are pretty much the settings I use here as well as a few others.

Now and again I have either helped sus out what is happening using the
remote support add on if they have it on there machine or over the
phone, but this is more in my own country.
That way at times you can hear what is going on.

Gene nz

On 26/06/2016 4:56 AM, Rosemarie Chavarria wrote:
Hi, everyone,


I'm trying thunderbird again but here's the problem I'm having with
it. It's not working too well now with NVDA like it did before. Now I
have to alt tab to get back to the inbox after writing a message or
replying. NVDA crashes with it. What could be going on?


Thanks for your help in advance.


Rosemarie





--
Check out my website for nvda tutorials and other blindness related material at http://www.accessibilitycentral.net


Re: gom player with nvda

Jacob Kruger
 


Thanks, but, yes, I often enough use ninite for various bits of bulk software installation...<smile>
 
Just seemed like other person was looking for a more direct, gom player download link.
 
Stay well

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, acceptance is versatile"

----- Original Message -----
From: Rémy Ruiz
Sent: 26 June, 2016 12:04 AM
Subject: Re: [nvda] gom player with nvda

Hi Jacob,

To download GOM since:
www.ninite.com.
Search in this page the word:
GOM
Video Player 2.3.3.5254
check the checkbox
GOM
Video Player 2.3.3.5254

Press b, " allowing to fall on the button named
get your ninite".
Enter.

Save your file...

Overview
1. Download
Your installer will begin downloading shortly. If it didn't start you can retry the download.
https://ninite.com/gom/ninite.exe
2. Run
Just run the Ninite .exe and relax. Ninite's automation will install the apps in the background and without any toolbars or junk.
File name:
Ninite GOM Installer.exe
Enjoy!

Cheers since France.

Rémy


Le 25/06/2016 à 20:53, Jacob Kruger a écrit :
Can't get hold of a direct link for setup file from their website, but, this page offers starting the download from them directly:

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, acceptance is versatile"
----- Original Message -----
From: Rémy Ruiz
Sent: 25 June, 2016 8:42 PM
Subject: Re: [nvda] gom player with nvda

Hi,

Please, Do you have un direct link for
gom player to download since:

www.ninite.com

Thanks again.

Cheers since France.

Rémy


Le 25/06/2016 à 19:29, Jacob Kruger a écrit :
Have thus far used it for all well-known/common audio formats, and most video formats as well - it will download necessary codec packs if/when it requires them.

Stay well

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, acceptance is versatile"

----- Original Message ----- From: "Lino Morales" <linomorales001@...>
To: <nvda@nvda.groups.io>
Sent: 25 June, 2016 6:07 PM
Subject: Re: [nvda] gom player with nvda


What file types does GOM Player support?


On 6/25/2016 12:40 AM, Jacob Kruger wrote:
I use it a lot of the time - whole interface can be handled via context menu, and keystrokes, so, yes, works fine with NVDA.

Stay well

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, acceptance is versatile"

----- Original Message ----- From: "Bobby" <bvinton@...>
To: <nvda@nvda.groups.io>
Sent: 25 June, 2016 2:37 AM
Subject: [nvda] gom player with nvda


Hay I found this media player called gom player.  I was wondering if it works with nvda.  I found it on www.ninite.com.  Please let me know





















Re: gom player with nvda

Rémy Ruiz
 

Hi Jacob,

To download GOM since:
www.ninite.com.
Search in this page the word:
GOM
Video Player 2.3.3.5254
check the checkbox
GOM
Video Player 2.3.3.5254

Press b, " allowing to fall on the button named
get your ninite".
Enter.

Save your file...

Overview
1. Download
Your installer will begin downloading shortly. If it didn't start you can retry the download.
https://ninite.com/gom/ninite.exe
2. Run
Just run the Ninite .exe and relax. Ninite's automation will install the apps in the background and without any toolbars or junk.
File name:
Ninite GOM Installer.exe
Enjoy!

Cheers since France.

Rémy


Le 25/06/2016 à 20:53, Jacob Kruger a écrit :

Can't get hold of a direct link for setup file from their website, but, this page offers starting the download from them directly:

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, acceptance is versatile"
----- Original Message -----
From: Rémy Ruiz
Sent: 25 June, 2016 8:42 PM
Subject: Re: [nvda] gom player with nvda

Hi,

Please, Do you have un direct link for
gom player to download since:

www.ninite.com

Thanks again.

Cheers since France.

Rémy


Le 25/06/2016 à 19:29, Jacob Kruger a écrit :
Have thus far used it for all well-known/common audio formats, and most video formats as well - it will download necessary codec packs if/when it requires them.

Stay well

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, acceptance is versatile"

----- Original Message ----- From: "Lino Morales" <linomorales001@...>
To: <nvda@nvda.groups.io>
Sent: 25 June, 2016 6:07 PM
Subject: Re: [nvda] gom player with nvda


What file types does GOM Player support?


On 6/25/2016 12:40 AM, Jacob Kruger wrote:
I use it a lot of the time - whole interface can be handled via context menu, and keystrokes, so, yes, works fine with NVDA.

Stay well

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, acceptance is versatile"

----- Original Message ----- From: "Bobby" <bvinton@...>
To: <nvda@nvda.groups.io>
Sent: 25 June, 2016 2:37 AM
Subject: [nvda] gom player with nvda


Hay I found this media player called gom player.  I was wondering if it works with nvda.  I found it on www.ninite.com.  Please let me know





















Your First NVDA App Module: session 1 posted, next session to be held on July 2nd at 11 AM Pacific (18:00 UTC)

 

Hi everyone,

 

The recording for today’s app module course session is now up:

http://www.nvda-kr.org/files/nvdaAppMod1.mp3

 

Also, next week’s session (scripts, input and output) will be held on July 2, 2016 at 11 AM Pacific (18:00 UTC) at NVDACon Korea TeamTalk server. Hope to see you then, and enjoy the recording.

Cheers,

Joseph


Re: nvda and simbles

Roger Stewart
 

Speaking of symbols, can anyone give me the settings of punctuation levels that were used before nvda 2015.4? I want to set mine back to that so I can use some as my level. I've fixed a few obvious ones and things are much better but I'd like to have it set the way I'm used to hearing it.

Thanks.

Roger

On 6/25/2016 2:53 PM, Chris Mullins wrote:
Hi
Although Jacob's suggestion will work, there is a specific section in NVDA for this process which also includes the context in which the symbol appears. Below is the help text from the manual. It's a sub-section of the Preferences option in the NVDA menu.

9.1.14. Punctuation/symbol pronunciation
This dialog allows you to change the way punctuation and other symbols are pronounced, as well as the symbol level at which they are spoken.
The language for which symbol pronunciation is being edited will be shown in the dialog's title. Note that this dialog respects the "Trust voice's language for processing symbols and characters" option found in the Voice Settings dialog; i.e. it uses the voice language rather than the NVDA global language setting when this option is enabled.
To change a symbol, first select it in the Symbols list.
• The Replacement field allows you to change the text that should be spoken in place of this symbol.
• Using the Level field, you can adjust the lowest symbol level at which this symbol should be spoken.
• The Send actual symbol to synthesizer field specifies when the symbol itself (in contrast to its replacement) should be sent to the synthesizer. This is useful if the symbol causes the synthesizer to pause or change the inflection of the voice. For example, a comma causes the synthesizer to pause. There are three options:
• never: Never send the actual symbol to the synthesizer.
• always: Always send the actual symbol to the synthesizer.
• only below symbols' level: Send the actual symbol only if the configured speech symbol level is lower than the level set for this symbol. For example, you might use this so that a symbol will have its replacement spoken at higher levels without pausing, while still being indicated with a pause at lower levels.
You can add new symbols by pressing the Add button. In the dialog that appears, enter the symbol and press the OK button. Then, change the fields for the new symbol as you would for other symbols.
You can remove a symbol you previously added by pressing the Remove button.
When you are finished, press the OK button to save your changes or the Cancel button to discard them.


CCheers
Chris
-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Bobby
Sent: 25 June 2016 18:59
To: nvda@nvda.groups.io
Subject: [nvda] nvda and simbles

I don't know how to make my nvda say period or exclaim. I don't like when I am typing and I hear tick or bang for exclaim help







Re: problem with thunderbird and NVDA

Dan Beaver
 

Hi Rosemarie,


I am using NVDA and Thunderbird. I am using the latest TB and the latest mainstream version of NVDA under windows 10.


I am experiencing none of the issues you mentioned. I can compose an email and when I hit either send or just close it out it goes back to the mail box I was using.

I am also not seeing the crashes you are.


What version of windows and NVDA are you using?


Dan Beaver

On 6/25/2016 12:56 PM, Rosemarie Chavarria wrote:
Hi, everyone,


I'm trying thunderbird again but here's the problem I'm having with it. It's not working too well now with NVDA like it did before. Now I have to alt tab to get back to the inbox after writing a message or replying. NVDA crashes with it. What could be going on?


Thanks for your help in advance.


Rosemarie






Re: nvda and simbles

Jacob Kruger
 

Chris, let me apologise, since, you're 100% right - hadnd't even paid atttention to the next context menu item under speech dictionaries...<smile>

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, acceptance is versatile"

----- Original Message -----
From: "Chris Mullins" <cjmullins29@gmail.com>
To: <nvda@nvda.groups.io>
Sent: 25 June, 2016 9:53 PM
Subject: Re: [nvda] nvda and simbles


Hi
Although Jacob's suggestion will work, there is a specific section in NVDA for this process which also includes the context in which the symbol appears. Below is the help text from the manual. It's a sub-section of the Preferences option in the NVDA menu.

9.1.14. Punctuation/symbol pronunciation
This dialog allows you to change the way punctuation and other symbols are pronounced, as well as the symbol level at which they are spoken.
The language for which symbol pronunciation is being edited will be shown in the dialog's title. Note that this dialog respects the "Trust voice's language for processing symbols and characters" option found in the Voice Settings dialog; i.e. it uses the voice language rather than the NVDA global language setting when this option is enabled.
To change a symbol, first select it in the Symbols list.
• The Replacement field allows you to change the text that should be spoken in place of this symbol.
• Using the Level field, you can adjust the lowest symbol level at which this symbol should be spoken.
• The Send actual symbol to synthesizer field specifies when the symbol itself (in contrast to its replacement) should be sent to the synthesizer. This is useful if the symbol causes the synthesizer to pause or change the inflection of the voice. For example, a comma causes the synthesizer to pause. There are three options:
• never: Never send the actual symbol to the synthesizer.
• always: Always send the actual symbol to the synthesizer.
• only below symbols' level: Send the actual symbol only if the configured speech symbol level is lower than the level set for this symbol. For example, you might use this so that a symbol will have its replacement spoken at higher levels without pausing, while still being indicated with a pause at lower levels.
You can add new symbols by pressing the Add button. In the dialog that appears, enter the symbol and press the OK button. Then, change the fields for the new symbol as you would for other symbols.
You can remove a symbol you previously added by pressing the Remove button.
When you are finished, press the OK button to save your changes or the Cancel button to discard them.


CCheers
Chris
-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Bobby
Sent: 25 June 2016 18:59
To: nvda@nvda.groups.io
Subject: [nvda] nvda and simbles

I don't know how to make my nvda say period or exclaim. I don't like when I am typing and I hear tick or bang for exclaim help


Re: nvda and simbles

Chris Mullins
 

Hi
Although Jacob's suggestion will work, there is a specific section in NVDA for this process which also includes the context in which the symbol appears. Below is the help text from the manual. It's a sub-section of the Preferences option in the NVDA menu.

9.1.14. Punctuation/symbol pronunciation
This dialog allows you to change the way punctuation and other symbols are pronounced, as well as the symbol level at which they are spoken.
The language for which symbol pronunciation is being edited will be shown in the dialog's title. Note that this dialog respects the "Trust voice's language for processing symbols and characters" option found in the Voice Settings dialog; i.e. it uses the voice language rather than the NVDA global language setting when this option is enabled.
To change a symbol, first select it in the Symbols list.
• The Replacement field allows you to change the text that should be spoken in place of this symbol.
• Using the Level field, you can adjust the lowest symbol level at which this symbol should be spoken.
• The Send actual symbol to synthesizer field specifies when the symbol itself (in contrast to its replacement) should be sent to the synthesizer. This is useful if the symbol causes the synthesizer to pause or change the inflection of the voice. For example, a comma causes the synthesizer to pause. There are three options:
• never: Never send the actual symbol to the synthesizer.
• always: Always send the actual symbol to the synthesizer.
• only below symbols' level: Send the actual symbol only if the configured speech symbol level is lower than the level set for this symbol. For example, you might use this so that a symbol will have its replacement spoken at higher levels without pausing, while still being indicated with a pause at lower levels.
You can add new symbols by pressing the Add button. In the dialog that appears, enter the symbol and press the OK button. Then, change the fields for the new symbol as you would for other symbols.
You can remove a symbol you previously added by pressing the Remove button.
When you are finished, press the OK button to save your changes or the Cancel button to discard them.


CCheers
Chris

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Bobby
Sent: 25 June 2016 18:59
To: nvda@nvda.groups.io
Subject: [nvda] nvda and simbles

I don't know how to make my nvda say period or exclaim. I don't like when I am typing and I hear tick or bang for exclaim help


Re: gom player with nvda

Rémy Ruiz
 

Hi Matt Turner,

Thankyou very much!

Cheers since France.

Rémy


Le 25/06/2016 à 21:26, Matt Turner a écrit :

Here's a download link.

http://jaws-users.com/programs/Audio/Gomplayerensetup.exe

On 6/25/2016 2:53 PM, Jacob Kruger wrote:
Can't get hold of a direct link for setup file from their website, but, this page offers starting the download from them directly:

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, acceptance is versatile"
----- Original Message -----
From: Rémy Ruiz
Sent: 25 June, 2016 8:42 PM
Subject: Re: [nvda] gom player with nvda

Hi,

Please, Do you have un direct link for
gom player to download since:

www.ninite.com

Thanks again.

Cheers since France.

Rémy


Le 25/06/2016 à 19:29, Jacob Kruger a écrit :
Have thus far used it for all well-known/common audio formats, and most video formats as well - it will download necessary codec packs if/when it requires them.

Stay well

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, acceptance is versatile"

----- Original Message ----- From: "Lino Morales" <linomorales001@...>
To: <nvda@nvda.groups.io>
Sent: 25 June, 2016 6:07 PM
Subject: Re: [nvda] gom player with nvda


What file types does GOM Player support?


On 6/25/2016 12:40 AM, Jacob Kruger wrote:
I use it a lot of the time - whole interface can be handled via context menu, and keystrokes, so, yes, works fine with NVDA.

Stay well

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, acceptance is versatile"

----- Original Message ----- From: "Bobby" <bvinton@...>
To: <nvda@nvda.groups.io>
Sent: 25 June, 2016 2:37 AM
Subject: [nvda] gom player with nvda


Hay I found this media player called gom player.  I was wondering if it works with nvda.  I found it on www.ninite.com.  Please let me know






















Re: gom player with nvda

Matt Turner
 

On 6/25/2016 2:53 PM, Jacob Kruger wrote:
Can't get hold of a direct link for setup file from their website, but, this page offers starting the download from them directly:

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, acceptance is versatile"
----- Original Message -----
From: Rémy Ruiz
Sent: 25 June, 2016 8:42 PM
Subject: Re: [nvda] gom player with nvda

Hi,

Please, Do you have un direct link for
gom player to download since:

www.ninite.com

Thanks again.

Cheers since France.

Rémy


Le 25/06/2016 à 19:29, Jacob Kruger a écrit :
Have thus far used it for all well-known/common audio formats, and most video formats as well - it will download necessary codec packs if/when it requires them.

Stay well

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, acceptance is versatile"

----- Original Message ----- From: "Lino Morales" <linomorales001@...>
To: <nvda@nvda.groups.io>
Sent: 25 June, 2016 6:07 PM
Subject: Re: [nvda] gom player with nvda


What file types does GOM Player support?


On 6/25/2016 12:40 AM, Jacob Kruger wrote:
I use it a lot of the time - whole interface can be handled via context menu, and keystrokes, so, yes, works fine with NVDA.

Stay well

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, acceptance is versatile"

----- Original Message ----- From: "Bobby" <bvinton@...>
To: <nvda@nvda.groups.io>
Sent: 25 June, 2016 2:37 AM
Subject: [nvda] gom player with nvda


Hay I found this media player called gom player.  I was wondering if it works with nvda.  I found it on www.ninite.com.  Please let me know





















Re: nvda and simbles

Bobby <bvinton@...>
 

Well you got it. That is what I was looking for.

On 6/25/2016 2:47 PM, Jacob Kruger wrote:
I just tested adding an entry to the default dictionary with the pattern being just the ! symbol, and the replacement being the word exclaim, and it then started reading out what I think you're looking for to me, when had punctuation level set to all, but anyway..?

Stay well

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, acceptance is versatile"

----- Original Message ----- From: "Bobby" <bvinton@optonline.net>
To: <nvda@nvda.groups.io>
Sent: 25 June, 2016 7:59 PM
Subject: [nvda] nvda and simbles


I don't know how to make my nvda say period or exclaim. I don't like when I am typing and I hear tick or bang for exclaim help







Re: gom player with nvda

Jacob Kruger
 


Can't get hold of a direct link for setup file from their website, but, this page offers starting the download from them directly:

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, acceptance is versatile"

----- Original Message -----
From: Rémy Ruiz
Sent: 25 June, 2016 8:42 PM
Subject: Re: [nvda] gom player with nvda

Hi,

Please, Do you have un direct link for
gom player to download since:

www.ninite.com

Thanks again.

Cheers since France.

Rémy


Le 25/06/2016 à 19:29, Jacob Kruger a écrit :
Have thus far used it for all well-known/common audio formats, and most video formats as well - it will download necessary codec packs if/when it requires them.

Stay well

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, acceptance is versatile"

----- Original Message ----- From: "Lino Morales" <linomorales001@...>
To: <nvda@nvda.groups.io>
Sent: 25 June, 2016 6:07 PM
Subject: Re: [nvda] gom player with nvda


What file types does GOM Player support?


On 6/25/2016 12:40 AM, Jacob Kruger wrote:
I use it a lot of the time - whole interface can be handled via context menu, and keystrokes, so, yes, works fine with NVDA.

Stay well

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, acceptance is versatile"

----- Original Message ----- From: "Bobby" <bvinton@...>
To: <nvda@nvda.groups.io>
Sent: 25 June, 2016 2:37 AM
Subject: [nvda] gom player with nvda


Hay I found this media player called gom player.  I was wondering if it works with nvda.  I found it on www.ninite.com.  Please let me know




















Re: nvda and simbles

Jacob Kruger
 

I just tested adding an entry to the default dictionary with the pattern being just the ! symbol, and the replacement being the word exclaim, and it then started reading out what I think you're looking for to me, when had punctuation level set to all, but anyway..?

Stay well

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, acceptance is versatile"

----- Original Message -----
From: "Bobby" <bvinton@optonline.net>
To: <nvda@nvda.groups.io>
Sent: 25 June, 2016 7:59 PM
Subject: [nvda] nvda and simbles


I don't know how to make my nvda say period or exclaim. I don't like when I am typing and I hear tick or bang for exclaim help




Re: gom player with nvda

Rémy Ruiz
 

Hi,

Please, Do you have un direct link for
gom player to download since:

www.ninite.com

Thanks again.

Cheers since France.

Rémy


Le 25/06/2016 à 19:29, Jacob Kruger a écrit :

Have thus far used it for all well-known/common audio formats, and most video formats as well - it will download necessary codec packs if/when it requires them.

Stay well

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, acceptance is versatile"

----- Original Message ----- From: "Lino Morales" <linomorales001@...>
To: <nvda@nvda.groups.io>
Sent: 25 June, 2016 6:07 PM
Subject: Re: [nvda] gom player with nvda


What file types does GOM Player support?


On 6/25/2016 12:40 AM, Jacob Kruger wrote:
I use it a lot of the time - whole interface can be handled via context menu, and keystrokes, so, yes, works fine with NVDA.

Stay well

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, acceptance is versatile"

----- Original Message ----- From: "Bobby" <bvinton@...>
To: <nvda@nvda.groups.io>
Sent: 25 June, 2016 2:37 AM
Subject: [nvda] gom player with nvda


Hay I found this media player called gom player.  I was wondering if it works with nvda.  I found it on www.ninite.com.  Please let me know