Greetings,
Please is there a way to set up in Windows 10 the old "computer" icon on the desktop to be able to quickly access all drives?
Very much appreciated
Blessings
Pascal

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Chris Mullins
Sent: Tuesday, May 24, 2016 7:45 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] how to set nvda auto read

Once you have set autoread  going, you can use  the shift key like a pause button.  Press it to stop the speech, press it again to resume speech  from where you left off.

Cheers
Chris

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of aikeo koomanivong
Sent: 24 May 2016 09:21
To: nvda@nvda.groups.io
Subject: [nvda] how to set nvda auto read

When I using the internet after Firefox or internet explorer full loading the screen reader will auto read when I press control keyboard it’s stop reading but when I want it auto read  again I don’t know how to do it If you have the best way please share with me Regards keo

mk,

         When I get to the first message in the Inbox NVDA announces "Table," followed by the subject of the first subject.  If I hit NVDA+NumPad 4 NVDA announces "No Previous."  If I follow that with NVDA+Numpad 2 it says, "No Object Inside."

          I've tried all of the Object Navigation Commands when sitting on that first message in the inbox and none seems to move me to anywhere near to the column headings for the respective fields shown beneath them in the inbox, so I'm still stymied.

Brian
-- 

Never underestimate the difficulty of changing false beliefs by facts. 

   ~ Henry Rosovsky

    

Well on another disturbing note, if you are subscribed to applemusic
and well it runs out or you make it go away itunes will happily delete
all music in your music folder or on your computer.
So yeah apple doesn't care about pc users much these days.



On 24/05/2016 8:45 a.m., Arlene wrote:

You know, If Apple is giving PC users I Tunes they should keep it
accessible for all screen readers! Do you think it's truly meant for
Apple computers and I devices? If that's the case, they shouldn't
release it to windows computers. If they do they should make it
accessable for all apple and windows computers. I think it's
craziness to have it released to windows being accessable then
suddenly not. Do you think with ten I tunes is not good or is it for
all. Like windows 7 and ten? Or, is it because I Tunes had been
updated and it's the way it is?

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Chris Shook
Sent: May-23-16 10:07 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA and Itunes 12.4.0.119

Hi Ingrid,
You aren't the only one having trouble with iTunes. NVDA nor JAWS is
working well with it at the moment. Do you have any other screen
readers?
Chris






.

Depending on your keyboard layout, NVDA+down arrow desktop or NVDA+A
laptop.
On 5/24/2016 1:21 AM, aikeo koomanivong wrote:

When I using the internet after Firefox or internet explorer full
loading the screen reader will auto read when I press control keyboard
it’s stop reading but when I want it auto read again I don’t know how
to do it
If you have the best way please share with me
Regards
keo

When I using the internet after Firefox or internet explorer full
loading the screen reader will auto read when I press control keyboard
it’s stop reading but when I want it auto read again I don’t know how
to do it
If you have the best way please share with me
Regards
keo

Hello,

Virtual Audio Cable can be found at:
http://software.muzychenko.net/eng/vac.htm

I use it on a regular basis and will try my best to answer questions.

Basically, the software manages objects called cables. A cable has the property of acting as both playback and recording device, and anything that's played back through it immediately becomes recordable from it. In addition there is the concept of a repeater which records from a device and repeats the data via playback to another device, such as from the microphone to one of the cables, or from one of the cables to your speakers.

Hope this helps.
Kind regards,

Felix Grützmacher

Christopher-Mark Gilland <clgilland07@...> schrieb am Di., 24. Mai 2016 um 06:26 Uhr:

There's a program that'll do exactly this very thing.  It's called Virtual
Audio Cable.  I dont' know much about it, but I did use it back in the days.
I remember it being accessible, though kind of a pain in the behaunkis to
set up.  Once done though, it was then pretty easy to use.  And, let me make
it clear.  I never said that the setup process wasn't accessible.  I simply
said it was kind of confusing, and a little bit annoying.
---
Christopher Gilland
JAWS Certified, 2016.
Training Instructor.

clgilland07@...
Phone: (704) 256-8010.
----- Original Message -----
From: "Mr. Wong Chi Wai, William" <cwwong.pro@...>
To: <nvda@nvda.groups.io>
Sent: Monday, May 23, 2016 11:44 PM
Subject: [nvda] Asking about any software that can pass audio signal from
one software to another and is accessible with NVDA


> Hi
> I learn that there is something like audiohighjack or soundflower that is
> Mac software which can act as a middleman to pass audio signal from one
> application to another. I am not sure if there is any accessible software
> that can be find on Windows which have the same or similar function.
>
> Any advice are welcome
>
>
>
>

There's a program that'll do exactly this very thing.  It's called Virtual
Audio Cable.  I dont' know much about it, but I did use it back in the days.
I remember it being accessible, though kind of a pain in the behaunkis to
set up.  Once done though, it was then pretty easy to use.  And, let me make
it clear.  I never said that the setup process wasn't accessible.  I simply
said it was kind of confusing, and a little bit annoying.
---
Christopher Gilland
JAWS Certified, 2016.
Training Instructor.

clgilland07@...
Phone: (704) 256-8010.
----- Original Message -----
From: "Mr. Wong Chi Wai, William" <cwwong.pro@...>
To: <nvda@nvda.groups.io>
Sent: Monday, May 23, 2016 11:44 PM
Subject: [nvda] Asking about any software that can pass audio signal from
one software to another and is accessible with NVDA


> Hi
> I learn that there is something like audiohighjack or soundflower that is
> Mac software which can act as a middleman to pass audio signal from one
> application to another. I am not sure if there is any accessible software
> that can be find on Windows which have the same or similar function.
>
> Any advice are welcome
>
>
>
>

mk,

         When I get to the first message in the Inbox NVDA announces "Table," followed by the subject of the first subject.  If I hit NVDA+NumPad 4 NVDA announces "No Previous."  If I follow that with NVDA+Numpad 2 it says, "No Object Inside."

          I've tried all of the Object Navigation Commands when sitting on that first message in the inbox and none seems to move me to anywhere near to the column headings for the respective fields shown beneath them in the inbox, so I'm still stymied.

Brian
-- 

Never underestimate the difficulty of changing false beliefs by facts. 

   ~ Henry Rosovsky

    

Hey all,
Just to let you know, I did send Apple support an email. I'll let you know if or when I get a response.
Chris

I've tried it using xp and Jaws 11. I don't know if it was me or if it was I
tunes itself. It didn't work well for me. I uninstalled it. I haven't tried
it since. I'm now on jaws 14 and the latest version of NVDA.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Christopher-Mark Gilland
Sent: May-23-16 8:28 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA and Itunes 12.4.0.119

I wasn't directing my message specifically at you. I apologize if you took
it that way. there have been a lot of people though it seems tonight who
have stated it was crap, or that it wasn't good, or was terrible, or
whatever.

The point I was trying to convey was, if you don't like it, then let Apple
know you don't. Plain and simple.

No hard feelings intended.
---
Christopher Gilland
JAWS Certified, 2016.
Training Instructor.

clgilland07@gmail.com
Phone: (704) 256-8010.
----- Original Message -----
From: "Chris Shook" <chris0309@samobile.net>
To: <nvda@nvda.groups.io>
Sent: Monday, May 23, 2016 11:23 PM
Subject: Re: [nvda] NVDA and Itunes 12.4.0.119

I can't speak for everyone, but I have not said in any post that iTunes is
crap. Is it annoying that it's broken again, yes. However, I do think it
will be fixed, eventually.

Hi
I learn that there is something like audiohighjack or soundflower that is Mac software which can act as a middleman to pass audio signal from one application to another. I am not sure if there is any accessible software that can be find on Windows which have the same or similar function.

Any advice are welcome

None taken. I didn't think you wre. The point I was trying to make is that while a lot of people have said iTunes is crap. There are those of us that still find it useful.
Sorry about the last post. You are right. One of us should have sent Apple an email days ago instead of waiting on someone else to do it.