Date   

Re: very good news about audio conversion soft ware

David Moore
 

I want to let you know that I use unchecky to download many programs. Like someone said, it is not 100 percent at not downloading something you do not want, so you should still check to see if all of the check boxes are unchecked to make sure that you do not download something else besides the program you want. However, Unchecky has automatically unchecked the check boxes for other downloads every single time for me. Unchecky really helps. I would not be without it, because it has stopped so many toolbars and other stuff from downloading with my desired download. I would greatly recommend it. Take care, all.

-----Original Message-----
From: Георги Ламбов
Sent: Wednesday, May 4, 2016 6:30 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] very good news about audio conversion soft ware

Here are some links for downloading Unchesky:


https://unchecky.com/

download.cnet.com/Unchecky/3000-2084_4-760...

www.downloadcrew.com/article/31648-unchecky

www.pcadvisor.co.uk › ... › Unchecky 0.4.3

unchecky.soft32.com › ... › Privacy Software

www.chip.de › Downloads › Windows-Tools
На 4.5.2016 г. в 12:18 ч., David Moore написа:
There is a program called unchecky that will allow you to install any software without any adds, or any unwanted software getting downloaded with what you want. Free Make might download and install better if you install the unchecky software. Just do a Google search for unchecky. Take care.


-----Original Message----- From: Ben J. Bloomgren
Sent: Wednesday, May 4, 2016 3:23 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] very good news about audio conversion soft ware

How do you issue that command? Do you put it after the extension or before it?

Ben

On May 4, 2016, at 00:16, Shaun Everiss <sm.everiss@gmail.com> wrote:

freemake does have opencandy in it though you will have to do a /nocandy on the installer so it does not load with adds.



On 4/05/2016 5:55 p.m., David Moore wrote:
Hi,
If you want to convert a file into different formats. Free Make video converter is your ticket. It is free and very accessible.
www.freemake.com/free_video_converter 1.. Cached
2.. Similar

Freemake Video Converter converts video between 500+ formats and gadgets free! Convert to MP4, MP3, AVI, MKV, iPhone, Android. ... Freemake Video Converter supports all popular and rare formats: MP4, AVI, MKV, WMV, MP3, DVD, 3GP, SWF, FLV, HD, MOV, RM, QT, Divx, Xvid, TS, MTS, Fraps .
Also, There is a website where you can upload your file and have it converted into many different formats:
www.convertfiles.com
There are two great options for you. Free make is very powerful, and the convertfiles web site is good as well. I wish you the best.

From: Bobby
Sent: Tuesday, May 3, 2016 9:25 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] very good news about audio conversion soft ware

no I don't mean rip I mean converting audio that I record or down load from the internet. I don't know whare or how to add files to convert.




On 5/3/2016 9:04 PM, Robert Mendoza wrote:

Once the Windows media player opens pressed the Control plus 3 to change it to suggestion view panel. Then, right-click and arrow down to select the More Option. Tab till you reach tab panel that says Rip Music. then, select the preferred settings or conversion to rip your music into different format like mp3, wma, and so on.


Robert MendozaOn 5/4/2016 8:25 AM, Bobby wrote:

Well I just learned some thing new. I never you could convert audio windows media player I only new you can rip with it. Can you please tell me ware the convert option is on windows media player because I can't find that option at all.


On 5/3/2016 7:16 PM, Patrick Le Baudour wrote:

Hum, if it's for converting into mp3 or wma, windows media player does it, no need for anything else... and having never used iTunes, i have no idea of what it can or can't do, I thought it was mainly for buying music from apple.

-- Patrick
Le 03/05/2016 à 23:14, Christopher-Mark Gilland a écrit :

Goodness gracious, yall! Why not just use ITunes to rip for crying out
loud! Is it mainly because ITunes doesn't support the formats you all
wanna rip into? If so, then OK, point taken, but otherwise... really?
---
Christopher Gilland






---
Този имейл е проверен за вируси от Avast.
https://www.avast.com/antivirus


Re: how to tell NVDA to read series of number in single digits.

David Moore
 

Here is the best way to have single digits read. When you are on the number, press num pad five twice to spell the word, but this time, it will say each digit of the number. That is it.

-----Original Message-----
From: Chris Mullins
Sent: Wednesday, May 4, 2016 11:00 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] how to tell NVDA to read series of number in single digits.

This works fine on ordinary numbers but ruins the speaking of currency amounts, so there is a trade off.

Cheers
Chris

-----Original Message-----
From: Ejaz Shah [mailto:eashah67@gmail.com]
Sent: 04 May 2016 14:13
To: nvda@nvda.groups.io
Subject: Re: [nvda] how to tell NVDA to read series of number in single digits.

The following speech dictionary entry should do this:
Pattern: (\d)(?=\d)
Replacement: \1
Type: Regular Expression

Note that there is a blank space after the 1.

On 5/4/2016 6:30 AM, nasrin khaksar wrote:
hello.
nvda most times for me the digits completely and sometimes reads single digits.
but i heard that settings this, is a capability of commercial screen readers.
thanks for asking and allah bless you.
please inform me if you found a solution.

On 5/4/16, Ali Abdalkadir <abdalkadir41@gmail.com> wrote:
Hello guys,

Does any of you know how to make NVDA read a series of numbers in
single digits?



Best regards,

Ali


Re: NVDA GENERAL,

Jacob Kruger
 

I came across a mini, fold-up USB keyboard at the one local flea-market - sort of informal shopping venue, with lots of little small stalls ranging across quite a wide range of target-markets, but, issue was that it would only fold out to roundabout 15cm wide, which wouldn't really be suitable for touch typing as such...<smile>

I generally just make sure I know the layout of the laptop's own keyboard - especially the insert key - just in case, and take it from there.

Stay well

Jacob Kruger
Blind Biker
Skype: BlindZA
"Roger Wilco wants to welcome you...to the space janitor's closet..."

On 2016-05-04 10:33 PM, Mallard wrote:
I have a usb numpad, which was part of a kit I got as a Christmas
present. I use that on my netbook, and keep the layout set to desktop too.

It's incredibly handy to have just a small keypad rather than a large,
full-size keyboard when I travel...


But I wouldn't know where those thingies are to be found.

Ciao,

Ollie





Il 04/05/2016 18:21, Jacob Kruger ha scritto:
I always plug external USB keyboards into my laptops - 99% of the time
anyway.

Thus, always keep screen readers set to desktop mode.

Stay well

Jacob Kruger
Blind Biker
Skype: BlindZA
"Roger Wilco wants to welcome you...to the space janitor's closet..."

On 2016-05-04 4:22 PM, Mallard wrote:
Hello William,


No idea. I generally use a desktop and, when I use my netbook, I use the
built-in keyboard - no external keyboards of sorts.


I wouldn't think a bluetooth keyboard should a problem though.


What do you mean when you say that no shortcuts seem to work? Could you
provide some examples?

Ciao,

Ollie





Il 04/05/2016 14:42, willmac@lantic.net ha scritto:
Hi Ollie,

Thank you for your response. I am using a laptop but am using a
wireless logitech full keyboards.

Is this a problem? Would usb keyboard be any diffent?

Regards,

William

------ Original Message ------
From: "Mallard" <mallard@kimabe.eu>
To: nvda@nvda.groups.io
Sent: 04/05/2016 13:49:54
Subject: Re: [nvda] NVDA GENERAL,
Hello William,


I'm definitely not an NVDA proficient user, but your last sentence
made me think.


Are you using a laptop, by any chance?


If so, you should set your keyboard layout to "Laptop"

(NVDA Menu - Keyboard settings), and then follow the list of commands
and keyboard shortcuts for laptops, rather than the one for desktops.


hth,

Ollie





Il 04/05/2016 11:45, willmac@lantic.net ha scritto:
Hi All,
I am new to this group and must apologise at the outset for my
ignorance if I am not following tghe correct Protocol.
I am partially sight impaired and the deteriation seems to be more
rapid at he moment which has resulted in my looking for
a program which will assist me to operate my computer.
I recently installed NVDA and it seem to just what I need.
However, I seem to have difficulty in mastering even the basics and
am wondering if I can get some assistance. (Skype???)
Very few of the shortcut keys seem to work for me.
Any suggestions would be most appreciated.
Regards,
William















Re: NVDA GENERAL,

Mallard
 

I have a usb numpad, which was part of a kit I got as a Christmas present. I use that on my netbook, and keep the layout set to desktop too.

It's incredibly handy to have just a small keypad rather than a large, full-size keyboard when I travel...


But I wouldn't know where those thingies are to be found.

Ciao,

Ollie

Il 04/05/2016 18:21, Jacob Kruger ha scritto:
I always plug external USB keyboards into my laptops - 99% of the time anyway.

Thus, always keep screen readers set to desktop mode.

Stay well

Jacob Kruger
Blind Biker
Skype: BlindZA
"Roger Wilco wants to welcome you...to the space janitor's closet..."

On 2016-05-04 4:22 PM, Mallard wrote:
Hello William,


No idea. I generally use a desktop and, when I use my netbook, I use the
built-in keyboard - no external keyboards of sorts.


I wouldn't think a bluetooth keyboard should a problem though.


What do you mean when you say that no shortcuts seem to work? Could you
provide some examples?

Ciao,

Ollie





Il 04/05/2016 14:42, willmac@lantic.net ha scritto:
Hi Ollie,

Thank you for your response. I am using a laptop but am using a
wireless logitech full keyboards.

Is this a problem? Would usb keyboard be any diffent?

Regards,

William

------ Original Message ------
From: "Mallard" <mallard@kimabe.eu>
To: nvda@nvda.groups.io
Sent: 04/05/2016 13:49:54
Subject: Re: [nvda] NVDA GENERAL,
Hello William,


I'm definitely not an NVDA proficient user, but your last sentence
made me think.


Are you using a laptop, by any chance?


If so, you should set your keyboard layout to "Laptop"

(NVDA Menu - Keyboard settings), and then follow the list of commands
and keyboard shortcuts for laptops, rather than the one for desktops.


hth,

Ollie





Il 04/05/2016 11:45, willmac@lantic.net ha scritto:
Hi All,
I am new to this group and must apologise at the outset for my
ignorance if I am not following tghe correct Protocol.
I am partially sight impaired and the deteriation seems to be more
rapid at he moment which has resulted in my looking for
a program which will assist me to operate my computer.
I recently installed NVDA and it seem to just what I need.
However, I seem to have difficulty in mastering even the basics and
am wondering if I can get some assistance. (Skype???)
Very few of the shortcut keys seem to work for me.
Any suggestions would be most appreciated.
Regards,
William











2 things

Tony James <megatronjames@...>
 

Hi, I was just wondering two things. First, is it possible to move by large chunks of text like paragraphs with nvda? Second, is it possible to insert place markers into documents like you can with Jaws? Thx

Tony JAmes, untouched and alive!


Re: voices again

Kevin Huber
 

Hi:

Is it possible to get a dectalk voice for NVDA, and if so, where would
I get it and how would I install it?
Kevin Huber

On 5/3/16, Isaac <bigikemusic@gmail.com> wrote:
So, if I bought the codefactory voices will I never be able to use the
tiflatechnia voices again with out uninstalling the codefactory ones?


Re: very good news about audio conversion soft ware

Gene
 

I should alter what I said.  I should say that, in reading the messages quoted under yours, I didn't have any problems reading the first two or three.  I didn't read further.  According to Ron's message, others appear to have problems reading one of these messages in their original form.  Unless the problem is solved, what happens if you issue the reply command and try to read the message?
 
Gene

----- Original Message -----
Sent: Wednesday, May 04, 2016 12:21 PM
Subject: Re: [nvda] very good news about audio conversion soft ware

Hi Rosemarie,

I hear that oddity with his messages too.  What is happening is that the spaces between words are some sort of unrecognizable character--unrecognizable to screen readers and certain synthesizers I would guess.  I think it may be because he is sending his messages from an IPhone or other IOS device.  It is interpreting his spaces between words as some sort of character.

On 5/4/2016 12:58 PM, Rosemarie Chavarria wrote:
Hi, David,


This message sounds so strange--like it's in a foreign language.


Rosemarie




On 5/4/2016 2:18 AM, David Moore wrote:
There is a program called unchecky that will allow you to install any software without any adds, or any unwanted software getting downloaded with what you want. Free Make might download and install better if you install the unchecky software. Just do a Google search for unchecky. Take care.


-----Original Message----- From: Ben J. Bloomgren
Sent: Wednesday, May 4, 2016 3:23 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] very good news about audio conversion soft ware

How do you issue that command? Do you put it after the extension or before it?

Ben

On May 4, 2016, at 00:16, Shaun Everiss <sm.everiss@...> wrote:

freemake does have opencandy in it though you will have to do a /nocandy on the installer so it does not load with adds.



On 4/05/2016 5:55 p.m., David Moore wrote:
Hi,
If you want to convert a file into different formats. Free Make video converter is your ticket. It is free and very accessible.
www.freemake.com/free_video_converter 1.. Cached
 2.. Similar

Freemake Video Converter converts video between 500+ formats and gadgets free! Convert to MP4, MP3, AVI, MKV, iPhone, Android. ... Freemake Video Converter supports all popular and rare formats: MP4, AVI, MKV, WMV, MP3, DVD, 3GP, SWF, FLV, HD, MOV, RM, QT, Divx, Xvid, TS, MTS, Fraps .
Also, There is a website where you can upload your file and have it converted into many different formats:
www.convertfiles.com
There are two great options for you. Free make is very powerful, and the convertfiles web site is good as well. I wish you the best.

From: Bobby
Sent: Tuesday, May 3, 2016 9:25 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] very good news about audio conversion soft ware

no I don't mean rip I mean converting audio that I record or down load from the internet.  I don't know whare or how to add files to convert.




On 5/3/2016 9:04 PM, Robert Mendoza wrote:

 Once the Windows media player opens pressed the Control plus 3 to change it to suggestion view panel. Then, right-click and arrow down to select the More Option. Tab till you reach tab panel that says Rip Music. then, select the preferred settings or conversion to rip your music into different format like mp3, wma, and so on.


Robert MendozaOn 5/4/2016 8:25 AM, Bobby wrote:

   Well I just learned some thing new.  I never you could convert audio windows media player I only new you can rip with it.  Can you please tell me ware the convert option is on windows media player because I can't find that option at all.


   On 5/3/2016 7:16 PM, Patrick Le Baudour wrote:

     Hum, if it's for converting into mp3 or wma, windows media player does it, no need for anything else... and having never used iTunes, i have no idea of what  it can or can't do,  I thought it was mainly for buying music from apple.

     -- Patrick
     Le 03/05/2016 à 23:14, Christopher-Mark Gilland a écrit :

       Goodness gracious, yall!  Why not just use ITunes to rip for crying out
       loud!  Is it mainly because ITunes doesn't support the formats you all
       wanna rip into?  If so, then OK, point taken, but otherwise... really?
       ---
       Christopher Gilland















--
They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"


Re: very good news about audio conversion soft ware

Gene
 

I'm not sure why you are having a problem reading the message.  It's fine here and I would expect in general that people read it without difficulty.
 
Gene

Sent: Wednesday, May 04, 2016 11:58 AM
Subject: Re: [nvda] very good news about audio conversion soft ware

Hi, David,


This message sounds so strange--like it's in a foreign language.


Rosemarie




On 5/4/2016 2:18 AM, David Moore wrote:
> There is a program called unchecky that will allow you to install any
> software without any adds, or any unwanted software getting downloaded
> with what you want. Free Make might download and install better if you
> install the unchecky software. Just do a Google search for unchecky.
> Take care.
>
>
> -----Original Message----- From: Ben J. Bloomgren
> Sent: Wednesday, May 4, 2016 3:23 AM
> To: nvda@nvda.groups.io
> Subject: Re: [nvda] very good news about audio conversion soft ware
>
> How do you issue that command? Do you put it after the extension or
> before it?
>
> Ben
>
>> On May 4, 2016, at 00:16, Shaun Everiss <sm.everiss@...> wrote:
>>
>> freemake does have opencandy in it though you will have to do a
>> /nocandy on the installer so it does not load with adds.
>>
>>
>>
>>> On 4/05/2016 5:55 p.m., David Moore wrote:
>>> Hi,
>>> If you want to convert a file into different formats. Free Make
>>> video converter is your ticket. It is free and very accessible.
>>> www.freemake.com/free_video_converter 1.. Cached
>>>  2.. Similar
>>>
>>> Freemake Video Converter converts video between 500+ formats and
>>> gadgets free! Convert to MP4, MP3, AVI, MKV, iPhone, Android. ...
>>> Freemake Video Converter supports all popular and rare formats: MP4,
>>> AVI, MKV, WMV, MP3, DVD, 3GP, SWF, FLV, HD, MOV, RM, QT, Divx, Xvid,
>>> TS, MTS, Fraps .
>>> Also, There is a website where you can upload your file and have it
>>> converted into many different formats:
>>> www.convertfiles.com
>>> There are two great options for you. Free make is very powerful, and
>>> the convertfiles web site is good as well. I wish you the best.
>>>
>>> From: Bobby
>>> Sent: Tuesday, May 3, 2016 9:25 PM
>>> To: nvda@nvda.groups.io
>>> Subject: Re: [nvda] very good news about audio conversion soft ware
>>>
>>> no I don't mean rip I mean converting audio that I record or down
>>> load from the internet.  I don't know whare or how to add files to
>>> convert.
>>>
>>>
>>>
>>>
>>> On 5/3/2016 9:04 PM, Robert Mendoza wrote:
>>>
>>>  Once the Windows media player opens pressed the Control plus 3 to
>>> change it to suggestion view panel. Then, right-click and arrow down
>>> to select the More Option. Tab till you reach tab panel that says
>>> Rip Music. then, select the preferred settings or conversion to rip
>>> your music into different format like mp3, wma, and so on.
>>>
>>>
>>> Robert MendozaOn 5/4/2016 8:25 AM, Bobby wrote:
>>>
>>>    Well I just learned some thing new.  I never you could convert
>>> audio windows media player I only new you can rip with it.  Can you
>>> please tell me ware the convert option is on windows media player
>>> because I can't find that option at all.
>>>
>>>
>>>    On 5/3/2016 7:16 PM, Patrick Le Baudour wrote:
>>>
>>>      Hum, if it's for converting into mp3 or wma, windows media
>>> player does it, no need for anything else... and having never used
>>> iTunes, i have no idea of what  it can or can't do,  I thought it
>>> was mainly for buying music from apple.
>>>
>>>      -- Patrick
>>>      Le 03/05/2016 à 23:14, Christopher-Mark Gilland a écrit :
>>>
>>>        Goodness gracious, yall!  Why not just use ITunes to rip for
>>> crying out
>>>        loud!  Is it mainly because ITunes doesn't support the
>>> formats you all
>>>        wanna rip into?  If so, then OK, point taken, but
>>> otherwise... really?
>>>        ---
>>>        Christopher Gilland
>>
>>
>>
>
>
>
>
>
>




Re: AudioScreen add-on is no longer working

Jacob Kruger
 

Thanks.

Not too much of an issue, but, would just have liked to have known what could have caused the issue, so that can avoid it in future...<smile>

Stay well

Jacob Kruger
Blind Biker
Skype: BlindZA
"Roger Wilco wants to welcome you...to the space janitor's closet..."

On 2016-05-04 7:58 PM, Arlene wrote:
Oh that's good. I'm glad it's all working for you! Sorry you had to start from scratch!

-----Original Message-----
From: Jacob Kruger [mailto:jacob@blindza.co.za]
Sent: May-04-16 10:42 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] AudioScreen add-on is no longer working

Ok, trashed old installation, including deleting old user profile app
data, and reinstalled from scratch, and all seems to be working again now.

Jacob Kruger
Blind Biker
Skype: BlindZA
"Roger Wilco wants to welcome you...to the space janitor's closet..."

On 2016-05-04 2:27 PM, Jacob Kruger wrote:
Not sure exactly when this happened, and therefore can't figure out why,
but, while the AudioScreen NVDA add-on is still installed, and was
initially working, when I activated it, using NVDA-key + ctrl + A, or
changed it's operational mode, using NVDA-key + alt + A, etc., it now
does nothing, makes no sounds, doesn't give me any feedback, etc.

Even it's other relevant key combinations don't seem to do anything, and
have tried uninstalling it, reinstalling, etc. etc., and doesn't seem to
make any difference.

As in, NVDA-key + alt + A does also not reflect any changes, any spoken
notification, etc.

Any thoughts/suggestions?

Or should I just try trashing NVDA's installation, and reinstall it from
scratch, since under my prior portable copy of NVDA, it does still work
as expected, but, since I specifically like the audio ducking feature of
an installation of NVDA, I want to stick to actual installation under
program files, etc.

TIA

Jacob Kruger
Blind Biker
Skype: BlindZA
"Roger Wilco wants to welcome you...to the space janitor's closet..."










Re: AudioScreen add-on is no longer working

Arlene
 

Oh that's good. I'm glad it's all working for you! Sorry you had to start from scratch!

-----Original Message-----
From: Jacob Kruger [mailto:jacob@blindza.co.za]
Sent: May-04-16 10:42 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] AudioScreen add-on is no longer working

Ok, trashed old installation, including deleting old user profile app
data, and reinstalled from scratch, and all seems to be working again now.

Jacob Kruger
Blind Biker
Skype: BlindZA
"Roger Wilco wants to welcome you...to the space janitor's closet..."

On 2016-05-04 2:27 PM, Jacob Kruger wrote:
Not sure exactly when this happened, and therefore can't figure out why,
but, while the AudioScreen NVDA add-on is still installed, and was
initially working, when I activated it, using NVDA-key + ctrl + A, or
changed it's operational mode, using NVDA-key + alt + A, etc., it now
does nothing, makes no sounds, doesn't give me any feedback, etc.

Even it's other relevant key combinations don't seem to do anything, and
have tried uninstalling it, reinstalling, etc. etc., and doesn't seem to
make any difference.

As in, NVDA-key + alt + A does also not reflect any changes, any spoken
notification, etc.

Any thoughts/suggestions?

Or should I just try trashing NVDA's installation, and reinstall it from
scratch, since under my prior portable copy of NVDA, it does still work
as expected, but, since I specifically like the audio ducking feature of
an installation of NVDA, I want to stick to actual installation under
program files, etc.

TIA

Jacob Kruger
Blind Biker
Skype: BlindZA
"Roger Wilco wants to welcome you...to the space janitor's closet..."





Re: NVDA remote addon

Rui Fontes
 

Hello!

For me, one good thing to add is a keystroke to copy a text to clipboard
and, simultaneously, send it to the other machine...
By instance, Windows+Ctrl+C...

Rui


-----Mensagem Original-----
De: Andre Fisher
Data: quarta-feira, 4 de maio de 2016 18:36
Para: nvda@nvda.groups.io
Assunto: Re: [nvda] NVDA remote addon

Hello tyler.
Will there be further development of this add-on? It has been quiet
for months now.

On 5/4/16, Peter Beasley <pjbeasley23@gmail.com> wrote:
Thanks! Got it ok now
.
-----Original Message-----
From: Tyler Spivey
Sent: Wednesday, May 04, 2016 12:52 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA remote addon

It's on nvdaremote.com. If you can't find it there, please go to the top
of the page and tell me what you hear, the first few lines or so.

On 5/4/2016 4:26 AM, Peter Beasley wrote:
don't seem to be able to find the download link for this addon.







Re: AudioScreen add-on is no longer working

Jacob Kruger
 

Ok, trashed old installation, including deleting old user profile app data, and reinstalled from scratch, and all seems to be working again now.

Jacob Kruger
Blind Biker
Skype: BlindZA
"Roger Wilco wants to welcome you...to the space janitor's closet..."

On 2016-05-04 2:27 PM, Jacob Kruger wrote:
Not sure exactly when this happened, and therefore can't figure out why,
but, while the AudioScreen NVDA add-on is still installed, and was
initially working, when I activated it, using NVDA-key + ctrl + A, or
changed it's operational mode, using NVDA-key + alt + A, etc., it now
does nothing, makes no sounds, doesn't give me any feedback, etc.

Even it's other relevant key combinations don't seem to do anything, and
have tried uninstalling it, reinstalling, etc. etc., and doesn't seem to
make any difference.

As in, NVDA-key + alt + A does also not reflect any changes, any spoken
notification, etc.

Any thoughts/suggestions?

Or should I just try trashing NVDA's installation, and reinstall it from
scratch, since under my prior portable copy of NVDA, it does still work
as expected, but, since I specifically like the audio ducking feature of
an installation of NVDA, I want to stick to actual installation under
program files, etc.

TIA

Jacob Kruger
Blind Biker
Skype: BlindZA
"Roger Wilco wants to welcome you...to the space janitor's closet..."




Re: NVDA remote addon

Andre Fisher
 

Hello tyler.
Will there be further development of this add-on? It has been quiet
for months now.

On 5/4/16, Peter Beasley <pjbeasley23@gmail.com> wrote:
Thanks! Got it ok now
.
-----Original Message-----
From: Tyler Spivey
Sent: Wednesday, May 04, 2016 12:52 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA remote addon

It's on nvdaremote.com. If you can't find it there, please go to the top
of the page and tell me what you hear, the first few lines or so.

On 5/4/2016 4:26 AM, Peter Beasley wrote:
don’t seem to be able to find the download link for this addon.







Re: very good news about audio conversion soft ware

Ron Canazzi
 

Hi Rosemarie,

I hear that oddity with his messages too.  What is happening is that the spaces between words are some sort of unrecognizable character--unrecognizable to screen readers and certain synthesizers I would guess.  I think it may be because he is sending his messages from an IPhone or other IOS device.  It is interpreting his spaces between words as some sort of character.

On 5/4/2016 12:58 PM, Rosemarie Chavarria wrote:
Hi, David,


This message sounds so strange--like it's in a foreign language.


Rosemarie




On 5/4/2016 2:18 AM, David Moore wrote:
There is a program called unchecky that will allow you to install any software without any adds, or any unwanted software getting downloaded with what you want. Free Make might download and install better if you install the unchecky software. Just do a Google search for unchecky. Take care.


-----Original Message----- From: Ben J. Bloomgren
Sent: Wednesday, May 4, 2016 3:23 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] very good news about audio conversion soft ware

How do you issue that command? Do you put it after the extension or before it?

Ben

On May 4, 2016, at 00:16, Shaun Everiss <sm.everiss@...> wrote:

freemake does have opencandy in it though you will have to do a /nocandy on the installer so it does not load with adds.



On 4/05/2016 5:55 p.m., David Moore wrote:
Hi,
If you want to convert a file into different formats. Free Make video converter is your ticket. It is free and very accessible.
www.freemake.com/free_video_converter 1.. Cached
 2.. Similar

Freemake Video Converter converts video between 500+ formats and gadgets free! Convert to MP4, MP3, AVI, MKV, iPhone, Android. ... Freemake Video Converter supports all popular and rare formats: MP4, AVI, MKV, WMV, MP3, DVD, 3GP, SWF, FLV, HD, MOV, RM, QT, Divx, Xvid, TS, MTS, Fraps .
Also, There is a website where you can upload your file and have it converted into many different formats:
www.convertfiles.com
There are two great options for you. Free make is very powerful, and the convertfiles web site is good as well. I wish you the best.

From: Bobby
Sent: Tuesday, May 3, 2016 9:25 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] very good news about audio conversion soft ware

no I don't mean rip I mean converting audio that I record or down load from the internet.  I don't know whare or how to add files to convert.




On 5/3/2016 9:04 PM, Robert Mendoza wrote:

 Once the Windows media player opens pressed the Control plus 3 to change it to suggestion view panel. Then, right-click and arrow down to select the More Option. Tab till you reach tab panel that says Rip Music. then, select the preferred settings or conversion to rip your music into different format like mp3, wma, and so on.


Robert MendozaOn 5/4/2016 8:25 AM, Bobby wrote:

   Well I just learned some thing new.  I never you could convert audio windows media player I only new you can rip with it.  Can you please tell me ware the convert option is on windows media player because I can't find that option at all.


   On 5/3/2016 7:16 PM, Patrick Le Baudour wrote:

     Hum, if it's for converting into mp3 or wma, windows media player does it, no need for anything else... and having never used iTunes, i have no idea of what  it can or can't do,  I thought it was mainly for buying music from apple.

     -- Patrick
     Le 03/05/2016 à 23:14, Christopher-Mark Gilland a écrit :

       Goodness gracious, yall!  Why not just use ITunes to rip for crying out
       loud!  Is it mainly because ITunes doesn't support the formats you all
       wanna rip into?  If so, then OK, point taken, but otherwise... really?
       ---
       Christopher Gilland















--
They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"


Re: very good news about audio conversion soft ware

Rosemarie Chavarria
 

Hi, David,


This message sounds so strange--like it's in a foreign language.


Rosemarie

On 5/4/2016 2:18 AM, David Moore wrote:
There is a program called unchecky that will allow you to install any software without any adds, or any unwanted software getting downloaded with what you want. Free Make might download and install better if you install the unchecky software. Just do a Google search for unchecky. Take care.


-----Original Message----- From: Ben J. Bloomgren
Sent: Wednesday, May 4, 2016 3:23 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] very good news about audio conversion soft ware

How do you issue that command? Do you put it after the extension or before it?

Ben

On May 4, 2016, at 00:16, Shaun Everiss <sm.everiss@gmail.com> wrote:

freemake does have opencandy in it though you will have to do a /nocandy on the installer so it does not load with adds.



On 4/05/2016 5:55 p.m., David Moore wrote:
Hi,
If you want to convert a file into different formats. Free Make video converter is your ticket. It is free and very accessible.
www.freemake.com/free_video_converter 1.. Cached
2.. Similar

Freemake Video Converter converts video between 500+ formats and gadgets free! Convert to MP4, MP3, AVI, MKV, iPhone, Android. ... Freemake Video Converter supports all popular and rare formats: MP4, AVI, MKV, WMV, MP3, DVD, 3GP, SWF, FLV, HD, MOV, RM, QT, Divx, Xvid, TS, MTS, Fraps .
Also, There is a website where you can upload your file and have it converted into many different formats:
www.convertfiles.com
There are two great options for you. Free make is very powerful, and the convertfiles web site is good as well. I wish you the best.

From: Bobby
Sent: Tuesday, May 3, 2016 9:25 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] very good news about audio conversion soft ware

no I don't mean rip I mean converting audio that I record or down load from the internet. I don't know whare or how to add files to convert.




On 5/3/2016 9:04 PM, Robert Mendoza wrote:

Once the Windows media player opens pressed the Control plus 3 to change it to suggestion view panel. Then, right-click and arrow down to select the More Option. Tab till you reach tab panel that says Rip Music. then, select the preferred settings or conversion to rip your music into different format like mp3, wma, and so on.


Robert MendozaOn 5/4/2016 8:25 AM, Bobby wrote:

Well I just learned some thing new. I never you could convert audio windows media player I only new you can rip with it. Can you please tell me ware the convert option is on windows media player because I can't find that option at all.


On 5/3/2016 7:16 PM, Patrick Le Baudour wrote:

Hum, if it's for converting into mp3 or wma, windows media player does it, no need for anything else... and having never used iTunes, i have no idea of what it can or can't do, I thought it was mainly for buying music from apple.

-- Patrick
Le 03/05/2016 à 23:14, Christopher-Mark Gilland a écrit :

Goodness gracious, yall! Why not just use ITunes to rip for crying out
loud! Is it mainly because ITunes doesn't support the formats you all
wanna rip into? If so, then OK, point taken, but otherwise... really?
---
Christopher Gilland





Re: NVDA GENERAL,

Jacob Kruger
 

I always plug external USB keyboards into my laptops - 99% of the time anyway.

Thus, always keep screen readers set to desktop mode.

Stay well

Jacob Kruger
Blind Biker
Skype: BlindZA
"Roger Wilco wants to welcome you...to the space janitor's closet..."

On 2016-05-04 4:22 PM, Mallard wrote:
Hello William,


No idea. I generally use a desktop and, when I use my netbook, I use the
built-in keyboard - no external keyboards of sorts.


I wouldn't think a bluetooth keyboard should a problem though.


What do you mean when you say that no shortcuts seem to work? Could you
provide some examples?

Ciao,

Ollie





Il 04/05/2016 14:42, willmac@lantic.net ha scritto:
Hi Ollie,

Thank you for your response. I am using a laptop but am using a
wireless logitech full keyboards.

Is this a problem? Would usb keyboard be any diffent?

Regards,

William

------ Original Message ------
From: "Mallard" <mallard@kimabe.eu>
To: nvda@nvda.groups.io
Sent: 04/05/2016 13:49:54
Subject: Re: [nvda] NVDA GENERAL,
Hello William,


I'm definitely not an NVDA proficient user, but your last sentence
made me think.


Are you using a laptop, by any chance?


If so, you should set your keyboard layout to "Laptop"

(NVDA Menu - Keyboard settings), and then follow the list of commands
and keyboard shortcuts for laptops, rather than the one for desktops.


hth,

Ollie





Il 04/05/2016 11:45, willmac@lantic.net ha scritto:
Hi All,
I am new to this group and must apologise at the outset for my
ignorance if I am not following tghe correct Protocol.
I am partially sight impaired and the deteriation seems to be more
rapid at he moment which has resulted in my looking for
a program which will assist me to operate my computer.
I recently installed NVDA and it seem to just what I need.
However, I seem to have difficulty in mastering even the basics and
am wondering if I can get some assistance. (Skype???)
Very few of the shortcut keys seem to work for me.
Any suggestions would be most appreciated.
Regards,
William









Re: Putting Basic Training for NVDA manual on to DAISY player

Albert Ruel
 

If the E-PUB file for the NVDA tutorial was placed in the text folder perhaps the VR Stream will be able to read it.

Thx, Albert

Sent from my iPhone

On May 4, 2016, at 12:14 AM, Lindy <lulu58@...> wrote:

Hello list

I paid for and downloaded Basic Training for NVDA.Zip file and have been working through it.It recommends that the epub file should be put on to a DAISY book player so that one can listen to it and work through the activities on your PC. Unfortunately, I have been unable to do this with my second generation VR stream. When I unzip the file and arrow down to the epub file, it states that this is encrypted. Is this why it does not register on the VR stream’s $VR dtb folder when I try to paste it in with either JAWS or NVDA? I have not dealt with encrypted files before and would appreciate some advice/help.

kind regards

Lindy

 


Re: how to tell NVDA to read series of number in single digits.

Chris Mullins
 

This works fine on ordinary numbers but ruins the speaking of currency amounts, so there is a trade off.

Cheers
Chris

-----Original Message-----
From: Ejaz Shah [mailto:eashah67@gmail.com]
Sent: 04 May 2016 14:13
To: nvda@nvda.groups.io
Subject: Re: [nvda] how to tell NVDA to read series of number in single digits.

The following speech dictionary entry should do this:
Pattern: (\d)(?=\d)
Replacement: \1
Type: Regular Expression

Note that there is a blank space after the 1.

On 5/4/2016 6:30 AM, nasrin khaksar wrote:
hello.
nvda most times for me the digits completely and sometimes reads single digits.
but i heard that settings this, is a capability of commercial screen readers.
thanks for asking and allah bless you.
please inform me if you found a solution.

On 5/4/16, Ali Abdalkadir <abdalkadir41@gmail.com> wrote:
Hello guys,

Does any of you know how to make NVDA read a series of numbers in
single digits?



Best regards,

Ali


Re: NVDA GENERAL,

Mallard
 

Hello William,


No idea. I generally use a desktop and, when I use my netbook, I use the built-in keyboard - no external keyboards of sorts.


I wouldn't think a bluetooth keyboard should a problem though.


What do you mean when you say that no shortcuts seem to work? Could you provide some examples?

Ciao,

Ollie

Il 04/05/2016 14:42, willmac@lantic.net ha scritto:
Hi Ollie,

Thank you for your response. I am using a laptop but am using a wireless logitech full keyboards.

Is this a problem? Would usb keyboard be any diffent?

Regards,

William

------ Original Message ------
From: "Mallard" <mallard@kimabe.eu>
To: nvda@nvda.groups.io
Sent: 04/05/2016 13:49:54
Subject: Re: [nvda] NVDA GENERAL,
Hello William,


I'm definitely not an NVDA proficient user, but your last sentence made me think.


Are you using a laptop, by any chance?


If so, you should set your keyboard layout to "Laptop"

(NVDA Menu - Keyboard settings), and then follow the list of commands and keyboard shortcuts for laptops, rather than the one for desktops.


hth,

Ollie





Il 04/05/2016 11:45, willmac@lantic.net ha scritto:
Hi All,
I am new to this group and must apologise at the outset for my ignorance if I am not following tghe correct Protocol.
I am partially sight impaired and the deteriation seems to be more rapid at he moment which has resulted in my looking for
a program which will assist me to operate my computer.
I recently installed NVDA and it seem to just what I need.
However, I seem to have difficulty in mastering even the basics and am wondering if I can get some assistance. (Skype???)
Very few of the shortcut keys seem to work for me.
Any suggestions would be most appreciated.
Regards,
William





Re: NVDA remote addon

Peter Beasley
 

Thanks! Got it ok now
.

-----Original Message-----
From: Tyler Spivey
Sent: Wednesday, May 04, 2016 12:52 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA remote addon

It's on nvdaremote.com. If you can't find it there, please go to the top
of the page and tell me what you hear, the first few lines or so.

On 5/4/2016 4:26 AM, Peter Beasley wrote:
don’t seem to be able to find the download link for this addon.