Date   

Re: A question on outlook 2016

Brian's Mail list account <bglists@...>
 

Some companies use Outlook due to it allowing diary entries almost automatically from specially format d emails etc.
brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Gene" <gsasner@ripco.com>
To: <nvda@nvda.groups.io>
Sent: Sunday, November 13, 2016 1:31 AM
Subject: Re: [nvda] A question on outlook 2016


You can, according to what I remember, use screen review commands to see the misspelled word when using the spell checker in Microsoft Word. Again, as I recall, you can't when using Outlook 2016. Is there any particular reason you want to use Outlook for e-mail? There are other clients that don't have this problem.

Gene


From: William Sallander
Sent: Saturday, November 12, 2016 6:42 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] A question on outlook 2016


I have gone and used the arrow key to go through the document/message. When I got to a misspelled word, I did use the context menu and it worked just fine.

I will be trying out the spell check function when I go and use word. If I have to arrow down through the document, I hope I don't have a lot of pages to go over since that will be a tedious process.

We'll see what happens.



From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Saturday, November 12, 2016 7:01 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] A question on outlook 2016



The question is how to hear the misspelled word when running the spell checker, not while typing. I'm not know if using the screen review commands can read this word. I seem to recall this being discussed before and it was determined that the Outlook 2016 spell checker can't be used to identify the misspelled word. I may be wrong but I have a pretty strong memory that that proved to be the case when more than one person experimented with the program.



However, if you have misspelled words flagged while typing, as you suggest, how would you then get a replacement without running the spell checker? Can you use the context menu while on the misspelled word?



Gene

----- Original Message -----

From: Rosemarie Chavarria

Sent: Saturday, November 12, 2016 5:35 PM

To: nvda@nvda.groups.io

Subject: Re: [nvda] A question on outlook 2016



Hi, William,



Hit insert control D to go to document formatting. Tab to the box that says "report spelling errors" and check it with the space bar. Then tab to the ok button and hit the space bar. To save the configuration,, hit insert control C. That will save your setting.



Hope this helps.



Rosemarie



On 11/12/2016 3:08 PM, William Sallander wrote:

Hello everybody:

I've just started playing with NVDA on a Windows 10 machine. So far everything has been going along just fine.

I use Outlook 2016 and NVDA seems to work just fine. However, I've noticed that when I want to do some spell checking, I press the F7 key to start the spell correction.

NVDA will tell me that there is a spelling error, but I don't know how to have it tell me what word is wrong.

The only way I can try and figure it out is to go to the suggestions list and try to figure it out from there.

IS THERE A KEY Stroke I can perform to get NVDA to tell me what word is wrong? Where in the documentation is or are these key strokes mentioned?


Re: NVDA unable to focus when I launch word 2016

Brian's Mail list account <bglists@...>
 

Is this a launch with a new document, ie empty, or from pointing at the document and loading it that way, or does this make no difference. Is this an installed nvda or a portable, and what is the synth in use?
I have had this happen on older versions of word too, but rarely. I found that doing a reboot of nvda, made it work, but took some seconds to close the old copy as if it had hung. Might be worth getting the nvdaold.log and seeing what is going on when it stops working. I have certainly found that task manager makes it suddenly talk again but most of the log entries I see are core frozen in stack and not very helpful. I have a sneaky suspicion that files made on other versions of word do sometimes make this occur.
Not used 2016 myself as several people I know have had problems with it with various screenreaders before now. Outlook and Word mostly.

I still prefer 2003, but when forced 2010 is not bad.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Pranav Lal" <pranav.lal@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Saturday, November 12, 2016 7:33 PM
Subject: [nvda] NVDA unable to focus when I launch word 2016


Hi all,

When I launch word 2016, NVDA freezes and says nothing. I have to quit word
using the task manager. I have tried with narrator and word has started as
expected. The task manager shows word running. I have tried with all add-ons
disabled without success.

OS=windows 10 64bit
What should I do next?



Re: strange NVDA problems

Brian's Mail list account <bglists@...>
 

No its usb, but its el cheapo and sometimes doubles letters or leaves them out, particularly spaces.

I have a very good Dell one which I normally use and that seems not to suffer this wey.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Arlene" <nedster66@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Saturday, November 12, 2016 6:11 PM
Subject: Re: [nvda] strange NVDA problems


Hey there: is your keyboard wireless? Does it need new batteries? Or is it usb and going?

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Brian's Mail list account
Sent: November-12-16 3:28 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] strange NVDA problems

I think this keyboard is going downhill hope you understood my last message!
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Brian's Mail list account" <bglists@blueyonder.co.uk>
To: <nvda@nvda.groups.io>
Sent: Thursday, November 10, 2016 9:00 AM
Subject: Re: [nvda] strange NVDA problems


What happens if you do right alt and n
Usually when desktop ittems won't launch, one of two issues tend to cause
it. There is an invisible open window over the top of the desktop say from
a program thatruns at start up, or Explorer itself is screwed up. This
latter effect is more rare, but can happen if a program like an inti virus
has stalled part way through hooking in to the system.
Other than that if it is not working on the ordinary mouse driven stems
then its not nvda.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Melissa Galbraith" <wvflutist@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Thursday, November 10, 2016 2:28 AM
Subject: Re: [nvda] strange NVDA problems


Yes. I know about the short cut, and it is on my desk top, but it
won't work. My friend tried clicking on some things on desktop, but it
just wouldn't open anything.


On 11/8/2016 11:27 PM, Gene wrote:
If NVDA was installed, it creates a short cut on the desktop and as I
recall, it also creates a short cut command, control alt n to run
NVDA. While you might want NVDA to run at boot up, it is not
necessary to have it run automatically to start it yourself. and in
addition, you should know how to run it yourself because at times you
need to restart it. This can usually be done, as I understand it, by
using the short cut command even when NVDA is already running.
Gene

*From:* Melissa Galbraith <mailto:wvflutist@gmail.com>
*Sent:* Tuesday, November 08, 2016 6:24 PM
*To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
*Subject:* [nvda] strange NVDA problems

A friend loaded NVDA on an old vista computer I was given. NVDA won't
let me check the box about automaticly starting NVDA when windows
start. I do't know if vista is the problem. I'm also not sure if I
have a 32 or 2=62 bit. To use the coputer, I have to have my friend get
it started for me. I'm ot sure what the problem is.


Melissa






Re: NVDA unable to focus when I launch word 2016

Pranav Lal
 

I now have log dumps of what happens when I try to get focus to word 2016.
ERROR - eventHandler.executeEvent (11:49:10):
error executing event: gainFocus on
<NVDAObjects.Dynamic_IAccessibleWordDocumentWindowNVDAObject object at
0x04F59E90> with extra args of {}
Traceback (most recent call last):
File "eventHandler.pyo", line 143, in executeEvent
File "eventHandler.pyo", line 91, in __init__
File "eventHandler.pyo", line 98, in next
File
"C:\Users\user\AppData\Roaming\nvda\addons\remote\globalPlugins\remoteClient\__i
nit__.py", line 338, in event_gainFocus
File "eventHandler.pyo", line 98, in next
File
"C:\Users\user\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easy
TableNavigator.py", line 75, in event_gainFocus
File
"C:\Users\user\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easy
TableNavigator.py", line 64, in tableNavAvailable
File
"C:\Users\user\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easy
TableNavigator.py", line 26, in _MSWordTableNavAvailable
File "NVDAObjects\__init__.pyo", line 958, in makeTextInfo
File "NVDAObjects\window\winword.pyo", line 526, in __init__
AttributeError: 'NoneType' object has no attribute 'range'
ERROR - eventHandler.executeEvent (11:49:10):
error executing event: caret on
<NVDAObjects.Dynamic_IAccessibleWordDocumentWindowNVDAObject object at
0x04F59E90> with extra args of {}
Traceback (most recent call last):
File "eventHandler.pyo", line 143, in executeEvent
File "eventHandler.pyo", line 91, in __init__
File "eventHandler.pyo", line 98, in next
File "NVDAObjects\IAccessible\__init__.pyo", line 1280, in event_caret
File "NVDAObjects\window\winword.pyo", line 1036, in event_caret
File "NVDAObjects\__init__.pyo", line 958, in makeTextInfo
File "NVDAObjects\window\winword.pyo", line 524, in __init__
AttributeError: 'NoneType' object has no attribute 'range'
INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:49:10):
Using Eloquence version 6.1.0.0
INFO - synthDriverHandler.setSynth (11:49:10):
Loaded synthDriver eloquence
IO - speech.speak (11:50:02):
Speaking [LangChangeCommand ('en_US'), u'Desktop list']
IO - speech.speak (11:50:02):
Speaking [LangChangeCommand ('en_US'), u'This PC 1 of 4']
IO - inputCore.InputManager.executeGesture (11:50:03):
Input: kb(desktop):windows+r
IO - speech.speak (11:50:03):
Speaking [LangChangeCommand ('en_US'), u'Run dialog Type the name of a
program, folder, document, or Internet resource, and Windows will open it for
you.']
IO - speech.speak (11:50:03):
Speaking [LangChangeCommand ('en_US'), u'Open: combo box collapsed']
IO - speech.speak (11:50:03):
Speaking [LangChangeCommand ('en_US'), u'edit Alt+o']
IO - speech.speak (11:50:03):
Speaking [LangChangeCommand ('en_US'), u'blank']
IO - inputCore.InputManager.executeGesture (11:50:03):
Input: kb(desktop):w
IO - speech._speakSpellingGen (11:50:03):
Speaking character u'w'
DEBUG - queueHandler.registerGeneratorObject (11:50:03):
Adding generator 13
DEBUG - queueHandler.pumpAll (11:50:03):
generator 13 finished
IO - inputCore.InputManager.executeGesture (11:50:04):
Input: kb(desktop):i
IO - speech._speakSpellingGen (11:50:04):
Speaking character u'i'
DEBUG - queueHandler.registerGeneratorObject (11:50:04):
Adding generator 14
DEBUG - queueHandler.pumpAll (11:50:04):
generator 14 finished
IO - inputCore.InputManager.executeGesture (11:50:04):
Input: kb(desktop):n
IO - speech._speakSpellingGen (11:50:04):
Speaking character u'n'
DEBUG - queueHandler.registerGeneratorObject (11:50:04):
Adding generator 15
DEBUG - queueHandler.pumpAll (11:50:04):
generator 15 finished
IO - inputCore.InputManager.executeGesture (11:50:04):
Input: kb(desktop):w
IO - speech._speakSpellingGen (11:50:04):
Speaking character u'w'
DEBUG - queueHandler.registerGeneratorObject (11:50:04):
Adding generator 16
DEBUG - queueHandler.pumpAll (11:50:04):
generator 16 finished
IO - inputCore.InputManager.executeGesture (11:50:04):
Input: kb(desktop):o
IO - speech._speakSpellingGen (11:50:04):
Speaking character u'o'
DEBUG - queueHandler.registerGeneratorObject (11:50:04):
Adding generator 17
DEBUG - queueHandler.pumpAll (11:50:04):
generator 17 finished
IO - inputCore.InputManager.executeGesture (11:50:04):
Input: kb(desktop):r
IO - speech._speakSpellingGen (11:50:04):
Speaking character u'r'
DEBUG - queueHandler.registerGeneratorObject (11:50:04):
Adding generator 18
DEBUG - queueHandler.pumpAll (11:50:04):
generator 18 finished
IO - inputCore.InputManager.executeGesture (11:50:04):
Input: kb(desktop):d
IO - speech._speakSpellingGen (11:50:04):
Speaking character u'd'
DEBUG - queueHandler.registerGeneratorObject (11:50:04):
Adding generator 19
DEBUG - queueHandler.pumpAll (11:50:04):
generator 19 finished
IO - inputCore.InputManager.executeGesture (11:50:04):
Input: kb(desktop):enter
IO - speech.speak (11:50:04):
Speaking [LangChangeCommand ('en_US'), u'Desktop list']
IO - speech.speak (11:50:04):
Speaking [LangChangeCommand ('en_US'), u'This PC 1 of 4']
DEBUGWARNING - RPC process 14256 (WINWORD.EXE) (11:50:05):
Thread 10272, build\x86\remote\ia2Support.cpp, installIA2Support, 86:
Error registering class object, code -2147221008

INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:05):
Using Eloquence version 6.1.0.0
DEBUG - speechDictHandler.SpeechDict.load (11:50:05):
Loading speech dictionary
'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American
English.dic'...
DEBUG - speechDictHandler.SpeechDict.load (11:50:05):
file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American
English.dic' not found.
INFO - synthDriverHandler.setSynth (11:50:05):
Loaded synthDriver eloquence
IO - speech.speak (11:50:05):
Speaking [LangChangeCommand ('en_US'), u'Opening - Word']
IO - speech.speak (11:50:05):
Speaking [LangChangeCommand ('en_US'), u'Document1 - Word']
IO - speech.speak (11:50:05):
Speaking [LangChangeCommand ('en_US'), u'Document1']
IO - speech.speak (11:50:05):
Speaking [LangChangeCommand ('en_US'), u'Microsoft Word Document edit multi
line']
IO - speech.speak (11:50:05):
Speaking [LangChangeCommand ('en_US'), u'blank']
IO - inputCore.InputManager.executeGesture (11:50:21):
Input: kb(desktop):alt+tab
INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:21):
Using Eloquence version 6.1.0.0
DEBUG - speechDictHandler.SpeechDict.load (11:50:21):
Loading speech dictionary
'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American
English.dic'...
DEBUG - speechDictHandler.SpeechDict.load (11:50:21):
file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American
English.dic' not found.
INFO - synthDriverHandler.setSynth (11:50:21):
Loaded synthDriver eloquence
IO - speech.speak (11:50:21):
Speaking [LangChangeCommand ('en_US'), u'Document1 - Word']
INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:21):
Using Eloquence version 6.1.0.0
DEBUG - speechDictHandler.SpeechDict.load (11:50:21):
Loading speech dictionary
'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American
English.dic'...
DEBUG - speechDictHandler.SpeechDict.load (11:50:21):
file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American
English.dic' not found.
INFO - synthDriverHandler.setSynth (11:50:21):
Loaded synthDriver eloquence
IO - speech.speak (11:50:21):
Speaking [LangChangeCommand ('en_US'), u'Document1 - Word']
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:21):
oleacc.AccessibleObjectFromEvent with window 263746, objectID 5 and childID 0:
[Error -2147467259] Unspecified error
IO - speech.speak (11:50:21):
Speaking [LangChangeCommand ('en_US'), u'Document1']
IO - speech.speak (11:50:21):
Speaking [LangChangeCommand ('en_US'), u'Microsoft Word Document edit multi
line']
IO - speech.speak (11:50:21):
Speaking [LangChangeCommand ('en_US'), u'blank']
IO - inputCore.InputManager.executeGesture (11:50:22):
Input: kb(desktop):t
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:22):
oleacc.AccessibleObjectFromEvent with window 263746, objectID 45 and childID 0:
[Error -2147467259] Unspecified error
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:22):
oleacc.AccessibleObjectFromEvent with window 263746, objectID 47 and childID 0:
[Error -2147467259] Unspecified error
IO - speech._speakSpellingGen (11:50:22):
Speaking character u't'
DEBUG - queueHandler.registerGeneratorObject (11:50:22):
Adding generator 20
DEBUG - queueHandler.pumpAll (11:50:22):
generator 20 finished
IO - inputCore.InputManager.executeGesture (11:50:23):
Input: kb(desktop):rightArrow
IO - speech._speakSpellingGen (11:50:23):
Speaking character u'line feed'
DEBUG - queueHandler.registerGeneratorObject (11:50:23):
Adding generator 21
DEBUG - queueHandler.pumpAll (11:50:23):
generator 21 finished
IO - inputCore.InputManager.executeGesture (11:50:23):
Input: kb(desktop):upArrow
IO - speech.speak (11:50:23):
Speaking [LangChangeCommand ('en_US'), u't']
IO - inputCore.InputManager.executeGesture (11:50:23):
Input: kb(desktop):a
IO - speech._speakSpellingGen (11:50:24):
Speaking character u'a'
DEBUG - queueHandler.registerGeneratorObject (11:50:24):
Adding generator 22
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:24):
oleacc.AccessibleObjectFromEvent with window 263746, objectID 83 and childID 0:
[Error -2147467259] Unspecified error
DEBUG - queueHandler.pumpAll (11:50:24):
generator 22 finished
IO - inputCore.InputManager.executeGesture (11:50:24):
Input: kb(desktop):t
IO - speech._speakSpellingGen (11:50:24):
Speaking character u't'
DEBUG - queueHandler.registerGeneratorObject (11:50:24):
Adding generator 23
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:24):
oleacc.AccessibleObjectFromEvent with window 263746, objectID 86 and childID 0:
[Error -2147467259] Unspecified error
DEBUG - queueHandler.pumpAll (11:50:24):
generator 23 finished
IO - inputCore.InputManager.executeGesture (11:50:24):
Input: kb(desktop):e
IO - speech._speakSpellingGen (11:50:24):
Speaking character u'e'
DEBUG - queueHandler.registerGeneratorObject (11:50:24):
Adding generator 24
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:24):
oleacc.AccessibleObjectFromEvent with window 263746, objectID 89 and childID 0:
[Error -2147467259] Unspecified error
DEBUG - queueHandler.pumpAll (11:50:24):
generator 24 finished
IO - inputCore.InputManager.executeGesture (11:50:24):
Input: kb(desktop):s
IO - speech._speakSpellingGen (11:50:24):
Speaking character u's'
DEBUG - queueHandler.registerGeneratorObject (11:50:24):
Adding generator 25
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:24):
oleacc.AccessibleObjectFromEvent with window 263746, objectID 92 and childID 0:
[Error -2147467259] Unspecified error
DEBUG - queueHandler.pumpAll (11:50:24):
generator 25 finished
IO - inputCore.InputManager.executeGesture (11:50:24):
Input: kb(desktop):t
IO - speech._speakSpellingGen (11:50:24):
Speaking character u't'
DEBUG - queueHandler.registerGeneratorObject (11:50:24):
Adding generator 26
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:24):
oleacc.AccessibleObjectFromEvent with window 263746, objectID 95 and childID 0:
[Error -2147467259] Unspecified error
DEBUG - queueHandler.pumpAll (11:50:24):
generator 26 finished
IO - inputCore.InputManager.executeGesture (11:50:26):
Input: kb(desktop):alt+tab
INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:26):
Using Eloquence version 6.1.0.0
DEBUG - speechDictHandler.SpeechDict.load (11:50:26):
Loading speech dictionary
'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American
English.dic'...
DEBUG - speechDictHandler.SpeechDict.load (11:50:26):
file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American
English.dic' not found.
INFO - synthDriverHandler.setSynth (11:50:26):
Loaded synthDriver eloquence
IO - speech.speak (11:50:26):
Speaking [LangChangeCommand ('en_US'), u'Document1 - Word']
INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:26):
Using Eloquence version 6.1.0.0
DEBUG - speechDictHandler.SpeechDict.load (11:50:26):
Loading speech dictionary
'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American
English.dic'...
DEBUG - speechDictHandler.SpeechDict.load (11:50:26):
file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American
English.dic' not found.
INFO - synthDriverHandler.setSynth (11:50:26):
Loaded synthDriver eloquence
IO - speech.speak (11:50:26):
Speaking [LangChangeCommand ('en_US'), u'Document1 - Word']
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:26):
oleacc.AccessibleObjectFromEvent with window 263746, objectID 96 and childID 0:
[Error -2147467259] Unspecified error
IO - speech.speak (11:50:26):
Speaking [LangChangeCommand ('en_US'), u'Document1']
IO - speech.speak (11:50:26):
Speaking [LangChangeCommand ('en_US'), u'Microsoft Word Document edit multi
line']
IO - speech.speak (11:50:26):
Speaking [LangChangeCommand ('en_US'), u'tatest']
IO - inputCore.InputManager.executeGesture (11:50:28):
Input: kb(desktop):alt+space
IO - speech.speak (11:50:28):
Speaking [LangChangeCommand ('en_US'), u'Restore r 1 of 7']
IO - inputCore.InputManager.executeGesture (11:50:28):
Input: kb(desktop):x
IO - speech._speakSpellingGen (11:50:28):
Speaking character u'x'
DEBUG - queueHandler.registerGeneratorObject (11:50:28):
Adding generator 27
DEBUG - queueHandler.pumpAll (11:50:28):
generator 27 finished
IO - speech.speak (11:50:28):
Speaking [LangChangeCommand ('en_US'), u'Document1 - Word']
IO - speech.speak (11:50:28):
Speaking [LangChangeCommand ('en_US'), u'Document1']
IO - speech.speak (11:50:28):
Speaking [LangChangeCommand ('en_US'), u'Microsoft Word Document edit multi
line']
IO - speech.speak (11:50:28):
Speaking [LangChangeCommand ('en_US'), u'tatest']
IO - inputCore.InputManager.executeGesture (11:50:29):
Input: kb(desktop):alt+tab
INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:29):
Using Eloquence version 6.1.0.0
DEBUG - speechDictHandler.SpeechDict.load (11:50:29):
Loading speech dictionary
'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American
English.dic'...
DEBUG - speechDictHandler.SpeechDict.load (11:50:29):
file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American
English.dic' not found.
INFO - synthDriverHandler.setSynth (11:50:29):
Loaded synthDriver eloquence
IO - speech.speak (11:50:29):
Speaking [LangChangeCommand ('en_US'), u'Document1 - Word']
INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:29):
Using Eloquence version 6.1.0.0
DEBUG - speechDictHandler.SpeechDict.load (11:50:29):
Loading speech dictionary
'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American
English.dic'...
DEBUG - speechDictHandler.SpeechDict.load (11:50:29):
file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American
English.dic' not found.
INFO - synthDriverHandler.setSynth (11:50:29):
Loaded synthDriver eloquence
IO - speech.speak (11:50:29):
Speaking [LangChangeCommand ('en_US'), u'Document1 - Word']
DEBUGWARNING - IAccessibleHandler.accessibleObjectFromEvent (11:50:29):
oleacc.AccessibleObjectFromEvent with window 263746, objectID 162 and childID 0:
[Error -2147467259] Unspecified error
IO - speech.speak (11:50:29):
Speaking [LangChangeCommand ('en_US'), u'Document1']
IO - speech.speak (11:50:29):
Speaking [LangChangeCommand ('en_US'), u'Microsoft Word Document edit multi
line']
IO - speech.speak (11:50:29):
Speaking [LangChangeCommand ('en_US'), u'tatest']
IO - inputCore.InputManager.executeGesture (11:50:33):
Input: kb(desktop):windows+m
INFO - external:synthDrivers.eloquence.SynthDriver.__init__ (11:50:34):
Using Eloquence version 6.1.0.0
DEBUG - speechDictHandler.SpeechDict.load (11:50:34):
Loading speech dictionary
'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American
English.dic'...
DEBUG - speechDictHandler.SpeechDict.load (11:50:34):
file 'C:\Users\user\AppData\Roaming\nvda\speechDicts\eloquence-American
English.dic' not found.
INFO - synthDriverHandler.setSynth (11:50:34):
Loaded synthDriver eloquence
IO - speech.speak (11:50:34):
Speaking [LangChangeCommand ('en_US'), u'Desktop list']
IO - speech.speak (11:50:34):
Speaking [LangChangeCommand ('en_US'), u'This PC 1 of 4']
IO - inputCore.InputManager.executeGesture (11:50:34):
Input: kb(desktop):NVDA+n
IO - speech.speak (11:50:34):
Speaking [LangChangeCommand ('en_US'), u'NVDA menu']
IO - inputCore.InputManager.executeGesture (11:50:35):
Input: kb(desktop):upArrow
IO - speech.speak (11:50:35):
Speaking [LangChangeCommand ('en_US'), u'Exit x 13 of 13']
IO - inputCore.InputManager.executeGesture (11:50:35):
Input: kb(desktop):upArrow
IO - speech.speak (11:50:35):
Speaking [LangChangeCommand ('en_US'), u'Donate d 11 of 13']
IO - inputCore.InputManager.executeGesture (11:50:36):
Input: kb(desktop):upArrow
IO - speech.speak (11:50:36):
Speaking [LangChangeCommand ('en_US'), u'Save configuration s 9 of 13']
IO - inputCore.InputManager.executeGesture (11:50:36):
Input: kb(desktop):upArrow
IO - speech.speak (11:50:36):
Speaking [LangChangeCommand ('en_US'), u'Reset configuration to factory defaults
r 8 of 13']
IO - inputCore.InputManager.executeGesture (11:50:36):
Input: kb(desktop):upArrow
IO - speech.speak (11:50:36):
Speaking [LangChangeCommand ('en_US'), u'Revert to saved configuration r 7 of
13']
IO - inputCore.InputManager.executeGesture (11:50:37):
Input: kb(desktop):upArrow
IO - speech.speak (11:50:37):
Speaking [LangChangeCommand ('en_US'), u'Configuration profiles... c 6 of 13']
IO - inputCore.InputManager.executeGesture (11:50:37):
Input: kb(desktop):upArrow
IO - speech.speak (11:50:37):
Speaking [LangChangeCommand ('en_US'), u'Help subMenu h']
IO - inputCore.InputManager.executeGesture (11:50:38):
Input: kb(desktop):upArrow
IO - speech.speak (11:50:38):
Speaking [LangChangeCommand ('en_US'), u'Vocalizer subMenu v']
IO - inputCore.InputManager.executeGesture (11:50:38):
Input: kb(desktop):upArrow
IO - speech.speak (11:50:38):
Speaking [LangChangeCommand ('en_US'), u'Tools subMenu t']
IO - inputCore.InputManager.executeGesture (11:50:38):
Input: kb(desktop):rightArrow
IO - speech.speak (11:50:38):
Speaking [LangChangeCommand ('en_US'), u'View log v 1 of 7']
IO - inputCore.InputManager.executeGesture (11:50:39):
Input: kb(desktop):enter

-----Original Message-----
From: Pranav Lal [mailto:pranav.lal@gmail.com]
Sent: Sunday, November 13, 2016 1:03 AM
To: 'nvda@nvda.groups.io' <nvda@nvda.groups.io>
Subject: NVDA unable to focus when I launch word 2016

Hi all,

When I launch word 2016, NVDA freezes and says nothing. I have to quit word
using the task manager. I have tried with narrator and word has started as
expected. The task manager shows word running. I have tried with all add-ons
disabled without success.

OS=windows 10 64bit
What should I do next?


Re: A question on outlook 2016

Rosemarie Chavarria
 

I really like thunderbird too. The only thing I don't know how to do is create message rules or filters with it yet.



tt

On 11/12/2016 9:38 PM, Shaun Everiss wrote:
I use thunderbird, it works well and has a web interface it hardly crashes.
It uses the firefox/ chrome engine and it just works.
My issue with outlook 2016 is that it will happily lock nvda while viewing the inbox table especially with large messages or for unknown reasons.
Thunderbird just works, but on the other hand its the only client still in development that I can use right now.
If you don't care about security and want to see if it works with you, eudora 7.0 the last comercial version of eudora before it went opensource works a bit of hit and miss with nvda but will work with other things.
Thunderbird works with nvda but I am not sure about others.
I havn't needed to bother with anything else now I use thunderbird.
If you have issues with thunderbird you can try eudora ose, this is not developed anymore in fact its insecure as it uses the 3.x thunderbird engine and stopped development a year after it came on stream.
Thunderbird is like firefox, it could be outlook like but out of the box comes with a callendar app called lightning which you can turn off and mail
You can optionally add everything from add blockers through to search engines, chat services, callendars and the like but its simple out the box.
Add the modules you want.



On 13/11/2016 2:37 p.m., Sam Bushman wrote:
What is the best client for email? I use outlook 2016 currently but would
love better solutions.

Thanks,

Sam





From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Saturday, November 12, 2016 6:32 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] A question on outlook 2016



You can, according to what I remember, use screen review commands to see the
misspelled word when using the spell checker in Microsoft Word. Again, as I
recall, you can't when using Outlook 2016. Is there any particular reason
you want to use Outlook for e-mail? There are other clients that don't have
this problem.



Gene



From: William Sallander <mailto:wsallander@gmail.com>

Sent: Saturday, November 12, 2016 6:42 PM

To: nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>

Subject: Re: [nvda] A question on outlook 2016



I have gone and used the arrow key to go through the document/message. When
I got to a misspelled word, I did use the context menu and it worked just
fine.

I will be trying out the spell check function when I go and use word. If I
have to arrow down through the document, I hope I don't have a lot of pages
to go over since that will be a tedious process.

We'll see what happens.



From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Saturday, November 12, 2016 7:01 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] A question on outlook 2016



The question is how to hear the misspelled word when running the spell
checker, not while typing. I'm not know if using the screen review commands
can read this word. I seem to recall this being discussed before and it was
determined that the Outlook 2016 spell checker can't be used to identify the
misspelled word. I may be wrong but I have a pretty strong memory that that
proved to be the case when more than one person experimented with the
program.



However, if you have misspelled words flagged while typing, as you suggest,
how would you then get a replacement without running the spell checker? Can
you use the context menu while on the misspelled word?



Gene

----- Original Message -----

From: Rosemarie Chavarria <mailto:knitqueen2007@gmail.com>

Sent: Saturday, November 12, 2016 5:35 PM

To: nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>

Subject: Re: [nvda] A question on outlook 2016



Hi, William,



Hit insert control D to go to document formatting. Tab to the box that says
"report spelling errors" and check it with the space bar. Then tab to the ok
button and hit the space bar. To save the configuration,, hit insert control
C. That will save your setting.



Hope this helps.



Rosemarie



On 11/12/2016 3:08 PM, William Sallander wrote:

Hello everybody:

I've just started playing with NVDA on a Windows 10 machine. So far
everything has been going along just fine.

I use Outlook 2016 and NVDA seems to work just fine. However, I've noticed
that when I want to do some spell checking, I press the F7 key to start the
spell correction.

NVDA will tell me that there is a spelling error, but I don't know how to
have it tell me what word is wrong.

The only way I can try and figure it out is to go to the suggestions list
and try to figure it out from there.

IS THERE A KEY Stroke I can perform to get NVDA to tell me what word is
wrong? Where in the documentation is or are these key strokes mentioned?








Re: A question on outlook 2016

 

I use thunderbird, it works well and has a web interface it hardly crashes.
It uses the firefox/ chrome engine and it just works.
My issue with outlook 2016 is that it will happily lock nvda while viewing the inbox table especially with large messages or for unknown reasons.
Thunderbird just works, but on the other hand its the only client still in development that I can use right now.
If you don't care about security and want to see if it works with you, eudora 7.0 the last comercial version of eudora before it went opensource works a bit of hit and miss with nvda but will work with other things.
Thunderbird works with nvda but I am not sure about others.
I havn't needed to bother with anything else now I use thunderbird.
If you have issues with thunderbird you can try eudora ose, this is not developed anymore in fact its insecure as it uses the 3.x thunderbird engine and stopped development a year after it came on stream.
Thunderbird is like firefox, it could be outlook like but out of the box comes with a callendar app called lightning which you can turn off and mail
You can optionally add everything from add blockers through to search engines, chat services, callendars and the like but its simple out the box.
Add the modules you want.

On 13/11/2016 2:37 p.m., Sam Bushman wrote:
What is the best client for email? I use outlook 2016 currently but would
love better solutions.

Thanks,

Sam





From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Saturday, November 12, 2016 6:32 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] A question on outlook 2016



You can, according to what I remember, use screen review commands to see the
misspelled word when using the spell checker in Microsoft Word. Again, as I
recall, you can't when using Outlook 2016. Is there any particular reason
you want to use Outlook for e-mail? There are other clients that don't have
this problem.



Gene



From: William Sallander <mailto:wsallander@gmail.com>

Sent: Saturday, November 12, 2016 6:42 PM

To: nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>

Subject: Re: [nvda] A question on outlook 2016



I have gone and used the arrow key to go through the document/message. When
I got to a misspelled word, I did use the context menu and it worked just
fine.

I will be trying out the spell check function when I go and use word. If I
have to arrow down through the document, I hope I don't have a lot of pages
to go over since that will be a tedious process.

We'll see what happens.



From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Saturday, November 12, 2016 7:01 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] A question on outlook 2016



The question is how to hear the misspelled word when running the spell
checker, not while typing. I'm not know if using the screen review commands
can read this word. I seem to recall this being discussed before and it was
determined that the Outlook 2016 spell checker can't be used to identify the
misspelled word. I may be wrong but I have a pretty strong memory that that
proved to be the case when more than one person experimented with the
program.



However, if you have misspelled words flagged while typing, as you suggest,
how would you then get a replacement without running the spell checker? Can
you use the context menu while on the misspelled word?



Gene

----- Original Message -----

From: Rosemarie Chavarria <mailto:knitqueen2007@gmail.com>

Sent: Saturday, November 12, 2016 5:35 PM

To: nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>

Subject: Re: [nvda] A question on outlook 2016



Hi, William,



Hit insert control D to go to document formatting. Tab to the box that says
"report spelling errors" and check it with the space bar. Then tab to the ok
button and hit the space bar. To save the configuration,, hit insert control
C. That will save your setting.



Hope this helps.



Rosemarie



On 11/12/2016 3:08 PM, William Sallander wrote:

Hello everybody:

I've just started playing with NVDA on a Windows 10 machine. So far
everything has been going along just fine.

I use Outlook 2016 and NVDA seems to work just fine. However, I've noticed
that when I want to do some spell checking, I press the F7 key to start the
spell correction.

NVDA will tell me that there is a spelling error, but I don't know how to
have it tell me what word is wrong.

The only way I can try and figure it out is to go to the suggestions list
and try to figure it out from there.

IS THERE A KEY Stroke I can perform to get NVDA to tell me what word is
wrong? Where in the documentation is or are these key strokes mentioned?








Audio Themes bug.

majno
 

Hello. i don't know where report it, so i'll leave it here.

There is a bug with sounds in Audio Themes. the sounds are laggy.

El 12-Nov-16 a las 9:54 PM, Pranav Lal escribió:
What version of powerpoint are you using? You find the slide sorter in the view ribbon. The usual view is normal. You need to change the view to slide sorter.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Paulius
Sent: Sunday, November 13, 2016 2:24 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] How to delete a slide from powerPoint document?

OK, where can I find the slide sorter?

2016-11-12 20:48 GMT+02:00, Pranav Lal <pranav.lal@gmail.com>:
Go to the slide sorter, scroll to the slide you want and hit the
delete key when you reach the slide you want to delete.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Paulius
Sent: Saturday, November 12, 2016 6:17 PM
To: nvda@nvda.groups.io
Subject: [nvda] How to delete a slide from powerPoint document?

Hello! I'd like to ask how is it possible to delete a slide from the
PowerPoint document? Thanks...
Sincerely,
Paulius Leveris









Re: A question on outlook 2016

Gene
 

I don't know if there is a best e-mail client.  Popular ones are Windows Live Mail and Thunderbird.  The newer Windows Live Mail uses ribbons, if you don't want ribbons.  the older version uses menus but someone will have to provide it for you.  I have a full installable old version but Microsoft isn't providing it any longer.  I think on this list someone recently said that the old version doesn't run in Windows 10 but I don't know if that's true. 
 
If you want to make message rules in your e-mail program and use (IMAP, Thunderbird lets you make rules and Windows Live Mail doesn't.  Windows Live Mail is slightly more accessible in that you can arrange the order of fields and which fields are displayed from the keyboard.  Thunderbird requires using amouse or the screen-reader's mouse function and drag and drop. 
 
Gene

----- Original Message -----
Sent: Saturday, November 12, 2016 7:37 PM
Subject: Re: [nvda] A question on outlook 2016

What is the best client for email? I use outlook 2016 currently but would love better solutions.

Thanks,

Sam

 

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Saturday, November 12, 2016 6:32 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] A question on outlook 2016

 

You can, according to what I remember, use screen review commands to see the misspelled word when using the spell checker in Microsoft Word.  Again, as I recall, you can't when using Outlook 2016.  Is there any particular reason you want to use Outlook for e-mail?  There are other clients that don't have this problem.

 

Gene

 

Sent: Saturday, November 12, 2016 6:42 PM

Subject: Re: [nvda] A question on outlook 2016

 

I have gone and used the arrow key to go through the document/message. When I got to a misspelled word, I did use the context menu and it worked just fine.

I will be trying out the spell check function when I go and use word. If I have to arrow down through the document, I hope I don’t have a lot of pages to go over since that will be a tedious process.

We’ll see what happens.

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Saturday, November 12, 2016 7:01 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] A question on outlook 2016

 

The question is how to hear the misspelled word when running the spell checker, not while typing.  I'm not know if using the screen review commands can read this word.  I seem to recall this being discussed before and it was determined that the Outlook 2016 spell checker can't be used to identify the misspelled word.  I may be wrong but I have a pretty strong memory that that proved to be the case when more than one person experimented with the program.

 

However, if you have misspelled words flagged while typing, as you suggest, how would you then get a replacement without running the spell checker?  Can you use the context menu while on the misspelled word?

 

Gene

----- Original Message -----

Sent: Saturday, November 12, 2016 5:35 PM

Subject: Re: [nvda] A question on outlook 2016

 

Hi, William,

 

Hit insert control D to go to document formatting. Tab to the box that says "report spelling errors" and check it with the space bar. Then tab to the ok button and hit the space bar. To save the configuration,, hit insert control C. That will save your setting.

 

Hope this helps.

 

Rosemarie

 

On 11/12/2016 3:08 PM, William Sallander wrote:

Hello everybody:

I’ve just started playing with NVDA on a Windows 10 machine. So far everything has been going along just fine.

I use Outlook 2016 and NVDA seems to work just fine. However, I’ve noticed that when I want to do some spell checking, I press the F7 key to start the spell correction.

NVDA will tell me that there is a spelling error, but I don’t know how to have it tell me what word is wrong.

The only way I can try and figure it out is to go to the suggestions list and try to figure it out from there.

IS THERE A KEY Stroke I can perform to get NVDA to tell me what word is wrong? Where in the documentation is or are these key strokes mentioned?

 

 


Re: How to delete a slide from powerPoint document?

Pranav Lal
 

What version of powerpoint are you using? You find the slide sorter in the view ribbon. The usual view is normal. You need to change the view to slide sorter.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Paulius
Sent: Sunday, November 13, 2016 2:24 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] How to delete a slide from powerPoint document?

OK, where can I find the slide sorter?

2016-11-12 20:48 GMT+02:00, Pranav Lal <pranav.lal@gmail.com>:
Go to the slide sorter, scroll to the slide you want and hit the
delete key when you reach the slide you want to delete.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Paulius
Sent: Saturday, November 12, 2016 6:17 PM
To: nvda@nvda.groups.io
Subject: [nvda] How to delete a slide from powerPoint document?

Hello! I'd like to ask how is it possible to delete a slide from the
PowerPoint document? Thanks...
Sincerely,
Paulius Leveris







Re: A question on outlook 2016

Rosemarie Chavarria
 

Hi, Sam,


I'm using mozilla thunderbird. It works great with     NVDA.


Rosemarie




On 11/12/2016 5:37 PM, Sam Bushman wrote:

What is the best client for email? I use outlook 2016 currently but would love better solutions.

Thanks,

Sam

 

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Saturday, November 12, 2016 6:32 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] A question on outlook 2016

 

You can, according to what I remember, use screen review commands to see the misspelled word when using the spell checker in Microsoft Word.  Again, as I recall, you can't when using Outlook 2016.  Is there any particular reason you want to use Outlook for e-mail?  There are other clients that don't have this problem.

 

Gene

 

Sent: Saturday, November 12, 2016 6:42 PM

Subject: Re: [nvda] A question on outlook 2016

 

I have gone and used the arrow key to go through the document/message. When I got to a misspelled word, I did use the context menu and it worked just fine.

I will be trying out the spell check function when I go and use word. If I have to arrow down through the document, I hope I don’t have a lot of pages to go over since that will be a tedious process.

We’ll see what happens.

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Saturday, November 12, 2016 7:01 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] A question on outlook 2016

 

The question is how to hear the misspelled word when running the spell checker, not while typing.  I'm not know if using the screen review commands can read this word.  I seem to recall this being discussed before and it was determined that the Outlook 2016 spell checker can't be used to identify the misspelled word.  I may be wrong but I have a pretty strong memory that that proved to be the case when more than one person experimented with the program.

 

However, if you have misspelled words flagged while typing, as you suggest, how would you then get a replacement without running the spell checker?  Can you use the context menu while on the misspelled word?

 

Gene

----- Original Message -----

Sent: Saturday, November 12, 2016 5:35 PM

Subject: Re: [nvda] A question on outlook 2016

 

Hi, William,

 

Hit insert control D to go to document formatting. Tab to the box that says "report spelling errors" and check it with the space bar. Then tab to the ok button and hit the space bar. To save the configuration,, hit insert control C. That will save your setting.

 

Hope this helps.

 

Rosemarie

 

On 11/12/2016 3:08 PM, William Sallander wrote:

Hello everybody:

I’ve just started playing with NVDA on a Windows 10 machine. So far everything has been going along just fine.

I use Outlook 2016 and NVDA seems to work just fine. However, I’ve noticed that when I want to do some spell checking, I press the F7 key to start the spell correction.

NVDA will tell me that there is a spelling error, but I don’t know how to have it tell me what word is wrong.

The only way I can try and figure it out is to go to the suggestions list and try to figure it out from there.

IS THERE A KEY Stroke I can perform to get NVDA to tell me what word is wrong? Where in the documentation is or are these key strokes mentioned?

 

 



Re: A question on outlook 2016

Sam Bushman
 

What is the best client for email? I use outlook 2016 currently but would love better solutions.

Thanks,

Sam

 

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Saturday, November 12, 2016 6:32 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] A question on outlook 2016

 

You can, according to what I remember, use screen review commands to see the misspelled word when using the spell checker in Microsoft Word.  Again, as I recall, you can't when using Outlook 2016.  Is there any particular reason you want to use Outlook for e-mail?  There are other clients that don't have this problem.

 

Gene

 

Sent: Saturday, November 12, 2016 6:42 PM

Subject: Re: [nvda] A question on outlook 2016

 

I have gone and used the arrow key to go through the document/message. When I got to a misspelled word, I did use the context menu and it worked just fine.

I will be trying out the spell check function when I go and use word. If I have to arrow down through the document, I hope I don’t have a lot of pages to go over since that will be a tedious process.

We’ll see what happens.

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Saturday, November 12, 2016 7:01 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] A question on outlook 2016

 

The question is how to hear the misspelled word when running the spell checker, not while typing.  I'm not know if using the screen review commands can read this word.  I seem to recall this being discussed before and it was determined that the Outlook 2016 spell checker can't be used to identify the misspelled word.  I may be wrong but I have a pretty strong memory that that proved to be the case when more than one person experimented with the program.

 

However, if you have misspelled words flagged while typing, as you suggest, how would you then get a replacement without running the spell checker?  Can you use the context menu while on the misspelled word?

 

Gene

----- Original Message -----

Sent: Saturday, November 12, 2016 5:35 PM

Subject: Re: [nvda] A question on outlook 2016

 

Hi, William,

 

Hit insert control D to go to document formatting. Tab to the box that says "report spelling errors" and check it with the space bar. Then tab to the ok button and hit the space bar. To save the configuration,, hit insert control C. That will save your setting.

 

Hope this helps.

 

Rosemarie

 

On 11/12/2016 3:08 PM, William Sallander wrote:

Hello everybody:

I’ve just started playing with NVDA on a Windows 10 machine. So far everything has been going along just fine.

I use Outlook 2016 and NVDA seems to work just fine. However, I’ve noticed that when I want to do some spell checking, I press the F7 key to start the spell correction.

NVDA will tell me that there is a spelling error, but I don’t know how to have it tell me what word is wrong.

The only way I can try and figure it out is to go to the suggestions list and try to figure it out from there.

IS THERE A KEY Stroke I can perform to get NVDA to tell me what word is wrong? Where in the documentation is or are these key strokes mentioned?

 

 


Re: A question on outlook 2016

Gene
 

You can, according to what I remember, use screen review commands to see the misspelled word when using the spell checker in Microsoft Word.  Again, as I recall, you can't when using Outlook 2016.  Is there any particular reason you want to use Outlook for e-mail?  There are other clients that don't have this problem.
 
Gene

Sent: Saturday, November 12, 2016 6:42 PM
Subject: Re: [nvda] A question on outlook 2016

I have gone and used the arrow key to go through the document/message. When I got to a misspelled word, I did use the context menu and it worked just fine.

I will be trying out the spell check function when I go and use word. If I have to arrow down through the document, I hope I don’t have a lot of pages to go over since that will be a tedious process.

We’ll see what happens.

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Saturday, November 12, 2016 7:01 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] A question on outlook 2016

 

The question is how to hear the misspelled word when running the spell checker, not while typing.  I'm not know if using the screen review commands can read this word.  I seem to recall this being discussed before and it was determined that the Outlook 2016 spell checker can't be used to identify the misspelled word.  I may be wrong but I have a pretty strong memory that that proved to be the case when more than one person experimented with the program.

 

However, if you have misspelled words flagged while typing, as you suggest, how would you then get a replacement without running the spell checker?  Can you use the context menu while on the misspelled word?

 

Gene

----- Original Message -----

Sent: Saturday, November 12, 2016 5:35 PM

Subject: Re: [nvda] A question on outlook 2016

 

Hi, William,

 

Hit insert control D to go to document formatting. Tab to the box that says "report spelling errors" and check it with the space bar. Then tab to the ok button and hit the space bar. To save the configuration,, hit insert control C. That will save your setting.

 

Hope this helps.

 

Rosemarie

 

On 11/12/2016 3:08 PM, William Sallander wrote:

Hello everybody:

I’ve just started playing with NVDA on a Windows 10 machine. So far everything has been going along just fine.

I use Outlook 2016 and NVDA seems to work just fine. However, I’ve noticed that when I want to do some spell checking, I press the F7 key to start the spell correction.

NVDA will tell me that there is a spelling error, but I don’t know how to have it tell me what word is wrong.

The only way I can try and figure it out is to go to the suggestions list and try to figure it out from there.

IS THERE A KEY Stroke I can perform to get NVDA to tell me what word is wrong? Where in the documentation is or are these key strokes mentioned?

 

 


Re: A question on outlook 2016

William Sallander <wsallander@...>
 

I have gone and used the arrow key to go through the document/message. When I got to a misspelled word, I did use the context menu and it worked just fine.

I will be trying out the spell check function when I go and use word. If I have to arrow down through the document, I hope I don’t have a lot of pages to go over since that will be a tedious process.

We’ll see what happens.

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Saturday, November 12, 2016 7:01 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] A question on outlook 2016

 

The question is how to hear the misspelled word when running the spell checker, not while typing.  I'm not know if using the screen review commands can read this word.  I seem to recall this being discussed before and it was determined that the Outlook 2016 spell checker can't be used to identify the misspelled word.  I may be wrong but I have a pretty strong memory that that proved to be the case when more than one person experimented with the program.

 

However, if you have misspelled words flagged while typing, as you suggest, how would you then get a replacement without running the spell checker?  Can you use the context menu while on the misspelled word?

 

Gene

----- Original Message -----

Sent: Saturday, November 12, 2016 5:35 PM

Subject: Re: [nvda] A question on outlook 2016

 

Hi, William,

 

Hit insert control D to go to document formatting. Tab to the box that says "report spelling errors" and check it with the space bar. Then tab to the ok button and hit the space bar. To save the configuration,, hit insert control C. That will save your setting.

 

Hope this helps.

 

Rosemarie

 

On 11/12/2016 3:08 PM, William Sallander wrote:

Hello everybody:

I’ve just started playing with NVDA on a Windows 10 machine. So far everything has been going along just fine.

I use Outlook 2016 and NVDA seems to work just fine. However, I’ve noticed that when I want to do some spell checking, I press the F7 key to start the spell correction.

NVDA will tell me that there is a spelling error, but I don’t know how to have it tell me what word is wrong.

The only way I can try and figure it out is to go to the suggestions list and try to figure it out from there.

IS THERE A KEY Stroke I can perform to get NVDA to tell me what word is wrong? Where in the documentation is or are these key strokes mentioned?

 

 


Re: A question on outlook 2016

Gene
 

The question is how to hear the misspelled word when running the spell checker, not while typing.  I'm not know if using the screen review commands can read this word.  I seem to recall this being discussed before and it was determined that the Outlook 2016 spell checker can't be used to identify the misspelled word.  I may be wrong but I have a pretty strong memory that that proved to be the case when more than one person experimented with the program.
 
However, if you have misspelled words flagged while typing, as you suggest, how would you then get a replacement without running the spell checker?  Can you use the context menu while on the misspelled word?
 
Gene

----- Original Message -----
Sent: Saturday, November 12, 2016 5:35 PM
Subject: Re: [nvda] A question on outlook 2016

Hi, William,


Hit insert control D to go to document formatting. Tab to the box that says "report spelling errors" and check it with the space bar. Then tab to the ok button and hit the space bar. To save the configuration,, hit insert control C. That will save your setting.


Hope this helps.


Rosemarie


On 11/12/2016 3:08 PM, William Sallander wrote:

Hello everybody:

I’ve just started playing with NVDA on a Windows 10 machine. So far everything has been going along just fine.

I use Outlook 2016 and NVDA seems to work just fine. However, I’ve noticed that when I want to do some spell checking, I press the F7 key to start the spell correction.

NVDA will tell me that there is a spelling error, but I don’t know how to have it tell me what word is wrong.

The only way I can try and figure it out is to go to the suggestions list and try to figure it out from there.

IS THERE A KEY Stroke I can perform to get NVDA to tell me what word is wrong? Where in the documentation is or are these key strokes mentioned?

 



Re: A question on outlook 2016

Rosemarie Chavarria
 

Hi, William,


Hit insert control D to go to document formatting. Tab to the box that says "report spelling errors" and check it with the space bar. Then tab to the ok button and hit the space bar. To save the configuration,, hit insert control C. That will save your setting.


Hope this helps.


Rosemarie


On 11/12/2016 3:08 PM, William Sallander wrote:

Hello everybody:

I’ve just started playing with NVDA on a Windows 10 machine. So far everything has been going along just fine.

I use Outlook 2016 and NVDA seems to work just fine. However, I’ve noticed that when I want to do some spell checking, I press the F7 key to start the spell correction.

NVDA will tell me that there is a spelling error, but I don’t know how to have it tell me what word is wrong.

The only way I can try and figure it out is to go to the suggestions list and try to figure it out from there.

IS THERE A KEY Stroke I can perform to get NVDA to tell me what word is wrong? Where in the documentation is or are these key strokes mentioned?

 



A question on outlook 2016

William Sallander <wsallander@...>
 

Hello everybody:

I’ve just started playing with NVDA on a Windows 10 machine. So far everything has been going along just fine.

I use Outlook 2016 and NVDA seems to work just fine. However, I’ve noticed that when I want to do some spell checking, I press the F7 key to start the spell correction.

NVDA will tell me that there is a spelling error, but I don’t know how to have it tell me what word is wrong.

The only way I can try and figure it out is to go to the suggestions list and try to figure it out from there.

IS THERE A KEY Stroke I can perform to get NVDA to tell me what word is wrong? Where in the documentation is or are these key strokes mentioned?

 


Re: How to delete a slide from powerPoint document?

 

OK, where can I find the slide sorter?

2016-11-12 20:48 GMT+02:00, Pranav Lal <pranav.lal@gmail.com>:

Go to the slide sorter, scroll to the slide you want and hit the delete key
when you reach the slide you want to delete.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Paulius
Sent: Saturday, November 12, 2016 6:17 PM
To: nvda@nvda.groups.io
Subject: [nvda] How to delete a slide from powerPoint document?

Hello! I'd like to ask how is it possible to delete a slide from the
PowerPoint document? Thanks...
Sincerely,
Paulius Leveris







NVDA unable to focus when I launch word 2016

Pranav Lal
 

Hi all,

When I launch word 2016, NVDA freezes and says nothing. I have to quit word
using the task manager. I have tried with narrator and word has started as
expected. The task manager shows word running. I have tried with all add-ons
disabled without success.

OS=windows 10 64bit
What should I do next?


Re: How to delete a slide from powerPoint document?

Pranav Lal
 

Go to the slide sorter, scroll to the slide you want and hit the delete key when you reach the slide you want to delete.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Paulius
Sent: Saturday, November 12, 2016 6:17 PM
To: nvda@nvda.groups.io
Subject: [nvda] How to delete a slide from powerPoint document?

Hello! I'd like to ask how is it possible to delete a slide from the PowerPoint document? Thanks...
Sincerely,
Paulius Leveris


Re: strange NVDA problems

Arlene
 

Hey there: is your keyboard wireless? Does it need new batteries? Or is it usb and going?

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Brian's Mail list account
Sent: November-12-16 3:28 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] strange NVDA problems

I think this keyboard is going downhill hope you understood my last message!
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Brian's Mail list account" <bglists@blueyonder.co.uk>
To: <nvda@nvda.groups.io>
Sent: Thursday, November 10, 2016 9:00 AM
Subject: Re: [nvda] strange NVDA problems


What happens if you do right alt and n
Usually when desktop ittems won't launch, one of two issues tend to cause
it. There is an invisible open window over the top of the desktop say from
a program thatruns at start up, or Explorer itself is screwed up. This
latter effect is more rare, but can happen if a program like an inti virus
has stalled part way through hooking in to the system.
Other than that if it is not working on the ordinary mouse driven stems
then its not nvda.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Melissa Galbraith" <wvflutist@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Thursday, November 10, 2016 2:28 AM
Subject: Re: [nvda] strange NVDA problems


Yes. I know about the short cut, and it is on my desk top, but it
won't work. My friend tried clicking on some things on desktop, but it
just wouldn't open anything.


On 11/8/2016 11:27 PM, Gene wrote:
If NVDA was installed, it creates a short cut on the desktop and as I
recall, it also creates a short cut command, control alt n to run
NVDA. While you might want NVDA to run at boot up, it is not
necessary to have it run automatically to start it yourself. and in
addition, you should know how to run it yourself because at times you
need to restart it. This can usually be done, as I understand it, by
using the short cut command even when NVDA is already running.
Gene

*From:* Melissa Galbraith <mailto:wvflutist@gmail.com>
*Sent:* Tuesday, November 08, 2016 6:24 PM
*To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
*Subject:* [nvda] strange NVDA problems

A friend loaded NVDA on an old vista computer I was given. NVDA won't
let me check the box about automaticly starting NVDA when windows
start. I do't know if vista is the problem. I'm also not sure if I
have a 32 or 2=62 bit. To use the coputer, I have to have my friend get
it started for me. I'm ot sure what the problem is.


Melissa