Date   

Re: Accessible imaging Software with NVDA?

 

Hello,
I am dealing with Windows computers.
I would love to know about the talking PE.
Are you able to image your own programs or just do a fresh Windows install?
Are you able to mount the image on a new computer that has never started up yet?
Thanks,

On Thu, Sep 15, 2016 at 10:59 AM, Jeremy <icu8it2@...> wrote:
Mostly depends on if you want to do the imaging from within Linux or Windows. In Windows, I'd use the talking PE and not the one from Brian ssmart, there's one that's updated more often

If you want to make the image from within a Linux environment, you could use clonezilla, which can be found in the latest versions of the Talking arch live system.

I don't have the link for either here on hand, but I can get both of them, if you are interested. The talking PE is the one that's updated by a guy, Carlos, over on the techtalk list. I can personally vouch for the PE for making images of my windows systems, as that's what I use and it works extreamly well.
Hope that helps. :)
Take care.
Brandon Keith Biggs wrote:
Hello,
Does anyone know of any accessible imaging software (preferably free) that will allow me to backup all my installed programs and files, preferably customize them, then allow me to install the image on a new computer with similar hardware?
I have been asked to setup around 50 computers with the exact same programs and file structure and then maintain them.
I know of all kinds of imaging programs:
Macrium Reflect
Acronis True Image
Symantec Ghost Solution Suite
AOMEI Backupper
Image for Windows
O&O DiskImage Professional
Paragon Backup (The one Microsoft uses in their stores and one I would like to use)
StorageCraft ShadowProtect Desktop
Cobian Backup

And the list goes on...

So what have people used? Also, would it be possible to install the image with NVDA?
I see there is Winstaller, but it doesn't look like a traditional imaging program, so I don't know if it allows installing images on similar hardware which is critical here.
Thanks,

Brandon Keith Biggs <http://brandonkeithbiggs.com/>







Re: Accessible imaging Software with NVDA?

jeremy <icu8it2@...>
 

Mostly depends on if you want to do the imaging from within Linux or Windows. In Windows, I'd use the talking PE and not the one from Brian ssmart, there's one that's updated more often

If you want to make the image from within a Linux environment, you could use clonezilla, which can be found in the latest versions of the Talking arch live system.

I don't have the link for either here on hand, but I can get both of them, if you are interested. The talking PE is the one that's updated by a guy, Carlos, over on the techtalk list. I can personally vouch for the PE for making images of my windows systems, as that's what I use and it works extreamly well.
Hope that helps. :)
Take care.
Brandon Keith Biggs wrote:

Hello,
Does anyone know of any accessible imaging software (preferably free) that will allow me to backup all my installed programs and files, preferably customize them, then allow me to install the image on a new computer with similar hardware?
I have been asked to setup around 50 computers with the exact same programs and file structure and then maintain them.
I know of all kinds of imaging programs:
Macrium Reflect
Acronis True Image
Symantec Ghost Solution Suite
AOMEI Backupper
Image for Windows
O&O DiskImage Professional
Paragon Backup (The one Microsoft uses in their stores and one I would like to use)
StorageCraft ShadowProtect Desktop
Cobian Backup

And the list goes on...

So what have people used? Also, would it be possible to install the image with NVDA?
I see there is Winstaller, but it doesn't look like a traditional imaging program, so I don't know if it allows installing images on similar hardware which is critical here.
Thanks,

Brandon Keith Biggs <http://brandonkeithbiggs.com/>


Re: microsoft word 2-16 and outlook 2016:

Pranav Lal
 

Hi Sean,

Yes, I have tried repairing office without success. I have access to the pst file so that is not a problem. I have too many message rules and a lot of archived e-mail to just switch.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Shaun Everiss
Sent: Thursday, September 15, 2016 6:50 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] microsoft word 2-16 and outlook 2016:

Hmmm.
Whenever I have switched last I simply resubbed my email lists and such, on email addresses.
On my tb I did a straight export from eudora and it worked.
If you find your .pst file which is usually in documents\outlook files or %appdata%\office\outlook or something like that you should in theory be able to import your mail and contacts at least.
I don't use other features of outlook though, does outlook crash with other readers, ie jaws?
I had outlook do bad things not syncing devices and being bad last week with dad's iphone and his main system mail.
After repairing the icloud system, I had to end up deleting his entire profiles, recreating it again, using his allready imported datafile on his system then subbing everything again again.
Have you tried to reinstall or repair office?



On 15/09/2016 12:39 p.m., Pranav Lal wrote:
Sean,

What e-mail client do you suggest? I have looked at thunderbird but cannot use it because importing from outlook is broken. I need to do a lot of formatting of documents such as using styles so cannot switch to alternative office applications because as far as I know they lack the underlying infrastructure to communicate fully with NVDA.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Shaun Everiss
Sent: Wednesday, September 14, 2016 12:29 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] microsoft word 2-16 and outlook 2016:

I would use something other than ms outlook.
Unless it can be fixed.
I abandond ms office ages ago.
In fact I think if I ever hit the need for office that I will either use old office xp which I legally own or one of the free office installs.
I do know that office 2007 or 2010 will work and with the features I use I don't need the cloud office apps and so won't run into a problem.
Since I do have jarte though its about all I will need.
If libreoffice works well or openoffice that is then I will probably use that.
True, if someone offers me office whatever the latest is and its funded for my business then hmmm.
Maybe I will use jaws because thats what people do for office and just use nvda for my personal use but I'd really like to use nvda for as much as I can.
Technically I could use my other comercial readers but since nvda needs to be used on a lot of things well.
I have got used to the ribbon in office and the shortcuts and it works as it should as long as I know the various code sequences.



On 14/09/2016 5:34 p.m., Pranav Lal wrote:
Hi Paul,

I have indeed resorted to writing my replies in Notepad and pasting
them into Outlook. However, It is one more step and what if I have to
quote parts of a message? More formatting issues for one thing when I
transfer data between programs. So yes, there are workarounds but
this situation must be addressed.

On 9/14/16, Paul Benson <paul.benson@guidemail.co.uk> wrote:
Hello Pranav and all,

Thoroughly annoying when the half-composed message is lost. Perhaps
a plan B is available? Compose the reply message in Notepad or
similar and only open up Outlook to copy the completed reply from
clipboard into the required location. This also allows simple regular updates while composing.

Paul Benson.

-----Original Message-----
From: Pranav Lal - Email Address: pranav.lal@gmail.com Sent On:
14/09/2016 02:09 Sent To: nvda@nvda.groups.io - Email Address:
nvda@nvda.groups.io
Subject: Re: [nvda] microsoft word 2-16 and outlook 2016:

Kenny,



Outlook 2016 works with NVDA but there is one issue which renders it
almost unusable. At least on my computer, when composing a message
or replying to a message, NVDA locks up randomly. The only way to
recover is to reboot the computer. I have raised tickets about this
problem.



Pranav

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Kenny Peyattt jr.
Sent: Sunday, September 11, 2016 10:46 AM
To: nvda@nvda.groups.io
Subject: [nvda] microsoft word 2-16 and outlook 2016:



Hi how well does outlook and Microsoft word 2016 work with nvda? I
am planning on upgrading to office 2016 soon, and I was wondering
how accessible Microsoft outlook 2016 is.

Kenny Peyattt jr.













Final reminder: NVDACon U.S. to take place on the 16th and 17th!

derek riemer
 

Dear NVDA community:

The North American regional conference for NVDA will take place tomorrow night and Saturday, online over teamtalk. Anyone and everyone is welcome, whether you're an avid NVDA user, or whether you have little or no experience with the free open source NVDA screen reader. This conference will include the following sessions:

* How NVDA is used by universities to test for web accessibility issues.

* a panel from three fine NVDA users using NVDA in various work and school settings,

* an open forum where you can talk to other NVDA users,

* A question and answer session where you can ask NVDA experts how to achieve things with Microsoft office,

* and last but not least: The keynote from the Lighthouse for the blind of San Fransisco!

Please visit our website, and check out what we have to offer! If you need help setting up the teamtalk client, Feel free to email us+owner@nvdacon.groups.io or for a quicker response, post an email to the NVDA users support list.
Our website is live at http://us-con.nvda-community.org/
I and the rest of the planning committee hope to see you there!
--

Derek Riemer

  • Department of computer science, third year undergraduate student.
  • Proud user of the NVDA screen reader.
  • Open source enthusiast.
  • Member of Bridge Cu
  • Avid skiier.

Websites:
Honors portfolio
Awesome little hand built weather app!

email me at derek.riemer@...
Phone: (303) 906-2194


Re: Accessible imaging Software with NVDA?

 

Hello,
You mean license key for DRM protected software?
I would install the non activated software and activate it manually if needed. Otherwise the keys would be for as many devices as I have.
Most programs, like NVDA, are free.
I found a great utility for installing software:
https://ninite.com/accessible
Thanks,

On Thu, Sep 15, 2016 at 8:41 AM, Brian's Mail list account <bglists@...> wrote:
Is there not an implication if any of the software has only, say three installs per key?
Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message ----- From: "Brandon Keith Biggs" <brandonkeithbiggs@...>
To: <nvda@nvda.groups.io>
Sent: Thursday, September 15, 2016 11:08 AM
Subject: [nvda] Accessible imaging Software with NVDA?


Hello,
Does anyone know of any accessible imaging software (preferably free) that
will allow me to backup all my installed programs and files, preferably
customize them, then allow me to install the image on a new computer with
similar hardware?
I have been asked to setup around 50 computers with the exact same programs
and file structure and then maintain them.
I know of all kinds of imaging programs:
Macrium Reflect
Acronis True Image
Symantec Ghost Solution Suite
AOMEI Backupper
Image for Windows
O&O DiskImage Professional
Paragon Backup (The one Microsoft uses in their stores and one I would like
to use)
StorageCraft ShadowProtect Desktop
Cobian Backup

And the list goes on...

So what have people used? Also, would it be possible to install the image
with NVDA?
I see there is Winstaller, but it doesn't look like a traditional imaging
program, so I don't know if it allows installing images on similar hardware
which is critical here.
Thanks,

Brandon Keith Biggs <http://brandonkeithbiggs.com/>







Re: OpenOffice?

 

It hasn't needed that for quite some time, if I recall. I know Libreoffice doesn't need it.






On 9/15/2016 12:22 PM, Dan Beaver wrote:
Does OpenOffice not need Java accessbridge now?


It used to and I found it less than reliable.


Thanks.


Dan Beaver






OpenOffice?

Dan Beaver
 

Does OpenOffice not need Java accessbridge now?


It used to and I found it less than reliable.


Thanks.


Dan Beaver


Re: Alternative to LibreOffice

Rosemarie Chavarria
 

Hi, Michael,


How do you get a document to read in open office? In the past I used to hit control down-arrow to read by paragraphs.


Thanks.


Rosemarie

On 9/15/2016 9:16 AM, Michael Capelle wrote:
openoffice is very good, it totally works
----- Original Message ----- From: "Rosemarie Chavarria" <knitqueen2007@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Thursday, September 15, 2016 11:09 AM
Subject: Re: [nvda] Alternative to LibreOffice


I tried libre office and didn't like it. I'm thinking of tryingopen office again.



On 9/15/2016 8:47 AM, Michael Capelle wrote:
i use openoffice with no problems.

-----Original Message----- From: Walmir Schultz via Groups.io
Sent: Thursday, September 15, 2016 10:40 AM
To: nvda@nvda.groups.io
Subject: [nvda] Alternative to LibreOffice

Hi,


While using a LibreOffice Calc spreadsheet NVDA repeatedly stop talking.
Pressing ALT+TAB, shows that it works normally with other open applications.

To "turn it on" again, is necessary to restart NVDA.

It is a very annoying situation that occurs every few minutes.

So, I am quitting with LibreOffice (there are other problems, too) and
I'd like an indication of other free software to replace LibreOffice.


Best regards,


Walmir.









Re: Alternative to LibreOffice

Michael Capelle <mcapelle@...>
 

openoffice is very good, it totally works

----- Original Message -----
From: "Rosemarie Chavarria" <knitqueen2007@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Thursday, September 15, 2016 11:09 AM
Subject: Re: [nvda] Alternative to LibreOffice


I tried libre office and didn't like it. I'm thinking of tryingopen office again.



On 9/15/2016 8:47 AM, Michael Capelle wrote:
i use openoffice with no problems.

-----Original Message----- From: Walmir Schultz via Groups.io
Sent: Thursday, September 15, 2016 10:40 AM
To: nvda@nvda.groups.io
Subject: [nvda] Alternative to LibreOffice

Hi,


While using a LibreOffice Calc spreadsheet NVDA repeatedly stop talking.
Pressing ALT+TAB, shows that it works normally with other open applications.

To "turn it on" again, is necessary to restart NVDA.

It is a very annoying situation that occurs every few minutes.

So, I am quitting with LibreOffice (there are other problems, too) and
I'd like an indication of other free software to replace LibreOffice.


Best regards,


Walmir.







Re: Alternative to LibreOffice

Rosemarie Chavarria
 

I think open office is better.

On 9/15/2016 8:40 AM, Walmir Schultz via Groups.io wrote:
Hi,


While using a LibreOffice Calc spreadsheet NVDA repeatedly stop talking. Pressing ALT+TAB, shows that it works normally with other open applications.

To "turn it on" again, is necessary to restart NVDA.

It is a very annoying situation that occurs every few minutes.

So, I am quitting with LibreOffice (there are other problems, too) and I'd like an indication of other free software to replace LibreOffice.


Best regards,


Walmir.



Re: Alternative to LibreOffice

Rosemarie Chavarria
 

I tried libre office and didn't like it. I'm thinking of tryingopen office again.

On 9/15/2016 8:47 AM, Michael Capelle wrote:
i use openoffice with no problems.

-----Original Message----- From: Walmir Schultz via Groups.io
Sent: Thursday, September 15, 2016 10:40 AM
To: nvda@nvda.groups.io
Subject: [nvda] Alternative to LibreOffice

Hi,


While using a LibreOffice Calc spreadsheet NVDA repeatedly stop talking.
Pressing ALT+TAB, shows that it works normally with other open applications.

To "turn it on" again, is necessary to restart NVDA.

It is a very annoying situation that occurs every few minutes.

So, I am quitting with LibreOffice (there are other problems, too) and
I'd like an indication of other free software to replace LibreOffice.


Best regards,


Walmir.






Re: Alternative to LibreOffice

Dan Beaver
 

Hi,


I had the same issue but then I discovered that when NVDA stops talking if you press f2 and then press it again the issue goes away for that LibreOffice Calc session.


Pressing f2 places calc in an edit mode on whatever cell is in focus. Pressing it again takes it out of edit mode.


I hope this will help you.


Dan Beaver

On 9/15/2016 11:40 AM, Walmir Schultz via Groups.io wrote:
Hi,


While using a LibreOffice Calc spreadsheet NVDA repeatedly stop talking. Pressing ALT+TAB, shows that it works normally with other open applications.

To "turn it on" again, is necessary to restart NVDA.

It is a very annoying situation that occurs every few minutes.

So, I am quitting with LibreOffice (there are other problems, too) and I'd like an indication of other free software to replace LibreOffice.


Best regards,


Walmir.




Re: Alternative to LibreOffice

Michael Capelle <mcapelle@...>
 

i use openoffice with no problems.

-----Original Message-----
From: Walmir Schultz via Groups.io
Sent: Thursday, September 15, 2016 10:40 AM
To: nvda@nvda.groups.io
Subject: [nvda] Alternative to LibreOffice

Hi,


While using a LibreOffice Calc spreadsheet NVDA repeatedly stop talking.
Pressing ALT+TAB, shows that it works normally with other open applications.

To "turn it on" again, is necessary to restart NVDA.

It is a very annoying situation that occurs every few minutes.

So, I am quitting with LibreOffice (there are other problems, too) and
I'd like an indication of other free software to replace LibreOffice.


Best regards,


Walmir.


Re: Accessible imaging Software with NVDA?

Brian's Mail list account BY <bglists@...>
 

Is there not an implication if any of the software has only, say three installs per key?
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Brandon Keith Biggs" <brandonkeithbiggs@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Thursday, September 15, 2016 11:08 AM
Subject: [nvda] Accessible imaging Software with NVDA?


Hello,
Does anyone know of any accessible imaging software (preferably free) that
will allow me to backup all my installed programs and files, preferably
customize them, then allow me to install the image on a new computer with
similar hardware?
I have been asked to setup around 50 computers with the exact same programs
and file structure and then maintain them.
I know of all kinds of imaging programs:
Macrium Reflect
Acronis True Image
Symantec Ghost Solution Suite
AOMEI Backupper
Image for Windows
O&O DiskImage Professional
Paragon Backup (The one Microsoft uses in their stores and one I would like
to use)
StorageCraft ShadowProtect Desktop
Cobian Backup

And the list goes on...

So what have people used? Also, would it be possible to install the image
with NVDA?
I see there is Winstaller, but it doesn't look like a traditional imaging
program, so I don't know if it allows installing images on similar hardware
which is critical here.
Thanks,

Brandon Keith Biggs <http://brandonkeithbiggs.com/>


Alternative to LibreOffice

Walmir Schultz <wsautodidata@...>
 

Hi,


While using a LibreOffice Calc spreadsheet NVDA repeatedly stop talking. Pressing ALT+TAB, shows that it works normally with other open applications.

To "turn it on" again, is necessary to restart NVDA.

It is a very annoying situation that occurs every few minutes.

So, I am quitting with LibreOffice (there are other problems, too) and I'd like an indication of other free software to replace LibreOffice.


Best regards,


Walmir.


Re: OCR software

Bhavya shah
 

Hi Aravind,
The Omnipage and JAWS OCR equivalent for NVDA is its own Tessarac
based OCR add-on available from the community portal website at
http://addons.nvda-project.org/addons/ocr.en.html
Let us know in case you or others encounter difficulties while using the same.
Thanks.

On 9/15/16, Lenron <lenron93@gmail.com> wrote:
what are the commands for the cloud OCR and how well does it work?

On 9/14/16, Aravind R <aravind.andhrabank@gmail.com> wrote:
jaws has a nice ocr with document OCR facility which works nicely with
image pdf also.
does NVDA has such OCR features?

On 9/15/16, Robert Kingett <kingettspeaks@gmail.com> wrote:
I was not able to tell if the cloud OCR is a new one, either. A Google
search turns up the old one on the website and I have not tried the
other
suggestion.

--
nothing is difficult unless you make it appear so.

r. aravind,

Assistant manager
Department of sales
bank of baroda retail loan factory, Chennai.
mobile no: +91 9940369593, 9710945613.
email id : aravind_069@yahoo.com, aravind.andhrabank@gmail.com.




--
Lenron Brown
Cell: 985-271-2832
Skype: ron.brown762



--
Warm Regards
Bhavya Shah
Using NVDA (Non Visual Desktop Access) free and open source screen
reader for Microsoft Windows
To download a copy of the free screen reader NVDA, please visit
http://www.nvaccess.org/
Using Google Talkback on Motorolla G second generation Lollipop 5.0.2
Reach me through the following means:
Mobile: +91 7506221750
E-mail id: bhavya.shah125@gmail.com
Skype id : bhavya.09


Re: OCR software

Lenron
 

what are the commands for the cloud OCR and how well does it work?

On 9/14/16, Aravind R <aravind.andhrabank@gmail.com> wrote:
jaws has a nice ocr with document OCR facility which works nicely with
image pdf also.
does NVDA has such OCR features?

On 9/15/16, Robert Kingett <kingettspeaks@gmail.com> wrote:
I was not able to tell if the cloud OCR is a new one, either. A Google
search turns up the old one on the website and I have not tried the other
suggestion.

--
nothing is difficult unless you make it appear so.

r. aravind,

Assistant manager
Department of sales
bank of baroda retail loan factory, Chennai.
mobile no: +91 9940369593, 9710945613.
email id : aravind_069@yahoo.com, aravind.andhrabank@gmail.com.



--
Lenron Brown
Cell: 985-271-2832
Skype: ron.brown762


Re: Accessible imaging Software with NVDA?

 

Well if you can get a windows talking pe I am sure someone will tell you where the heck to get that its somewhere on briansmart.com, well if you go to runtime.org or search for drive image xml you can happily make an image of whatever and back it up to a drive.
You need the module to add to your boot p image or simply have as a portable on hand.
You will need speech to actually run the image and restore the entire thing.
One thing though, I am assuming all these units have the same key or different keys.
Once you restore that machine I am unsure if the image will be activated or not.
I am unsure if by restoring you will invalidate your current key, yes you can change it but I am unsure how it works.
You may want to have the net turned off from all machines till you put in the right keys.
What I have tended to do with programs at least is have everything with switches in a batch script, run that as admin etc.
Before I did the remote and service thing, I had a small bit of software setup on the system that logged all keypresses and things the user did.
If a certain file or files existed in a certain location, then it would access a dropbox share and run the files I set in them.
I never got it fully working though.
I never got round to completely automating the files though.
My plan was to somehow have it such that I could upload to the share all I needed, and then have something check for files run them, email me and then quit but it never happened because I couldn't find a way to handle it.
Now days I'd probably get one of the ransomware packages set something to run, then when the user started the system get a message saying the system was unusable and that it was going to update mode then it would do its thing, report back and say it was uptodate.
It would mean I had control of things and all I'd have to do was upload the right files to the dropbox share.
But it never got that far.
I am still searching for a way to do it, including logging certain events, crashes, problems, and have an option where if a user had a problem they could write it down somehow and get the right info and get it mailed to me then I could go fixing it remotely but I never got that far and I am no programmer.

On 15/09/2016 10:08 p.m., Brandon Keith Biggs wrote:
Hello,
Does anyone know of any accessible imaging software (preferably free) that
will allow me to backup all my installed programs and files, preferably
customize them, then allow me to install the image on a new computer with
similar hardware?
I have been asked to setup around 50 computers with the exact same programs
and file structure and then maintain them.
I know of all kinds of imaging programs:
Macrium Reflect
Acronis True Image
Symantec Ghost Solution Suite
AOMEI Backupper
Image for Windows
O&O DiskImage Professional
Paragon Backup (The one Microsoft uses in their stores and one I would like
to use)
StorageCraft ShadowProtect Desktop
Cobian Backup

And the list goes on...

So what have people used? Also, would it be possible to install the image
with NVDA?
I see there is Winstaller, but it doesn't look like a traditional imaging
program, so I don't know if it allows installing images on similar hardware
which is critical here.
Thanks,

Brandon Keith Biggs <http://brandonkeithbiggs.com/>


Accessible imaging Software with NVDA?

 

Hello,
Does anyone know of any accessible imaging software (preferably free) that will allow me to backup all my installed programs and files, preferably customize them, then allow me to install the image on a new computer with similar hardware?
I have been asked to setup around 50 computers with the exact same programs and file structure and then maintain them.
I know of all kinds of imaging programs:
Macrium Reflect
Acronis True Image
Symantec Ghost Solution Suite
AOMEI Backupper
Image for Windows
O&O DiskImage Professional
Paragon Backup (The one Microsoft uses in their stores and one I would like to use)
StorageCraft ShadowProtect Desktop
Cobian Backup

And the list goes on...

So what have people used? Also, would it be possible to install the image with NVDA?
I see there is Winstaller, but it doesn't look like a traditional imaging program, so I don't know if it allows installing images on similar hardware which is critical here.
Thanks,


Re: Notepad plus plus installer?

 

if you explore the repository there is a rc for 7.0 that is the latest if you really want the last version called fixcrash2.
But yeah.

On 15/09/2016 7:06 p.m., nasrin khaksar wrote:
hi.
you can download from the developer website directly.
here is the link.

https://notepad-plus-plus.org/repository/6.x/6.9.2/npp.6.9.2.Installer.exe

its the last version until now.
God bless you.

On 9/15/16, Salva Doménech Miguel via Groups.io
<kibayasd=yahoo.com@groups.io> wrote:
Hi.
You can find it in ninite.
Cheers

El 14/09/2016 a las 22:27, Robert Kingett escribió:
​Hi all, I am looking for the windows setup file for notepad++ but
cannot find it on the website. I plan to use it to blog with markdown
and I was hoping someone would have the windows setup file? If so
could someone dropbox it to me? If anyone has any other blogging
ideas, let me know. I use a combination of Libreoffice and posting by
email.