Date   

Re: antivirus / i use a v g

 

Sophos Home can be a good option. My latest runs proved it to be accessible with NVDA. It's web-based control panel, might not be the best in the world in terms of accessibility, but at least I can turn stuff on and off.


Re: NVDA with which anti-virus

Gene
 

Windows Defender is almost identical to MSEE.  It is a renamed and hardly altered program for Windows 10.  It has the same contraversey as does MSEE about its effectiveness.
 
Gene

Sent: Saturday, July 02, 2016 6:12 PM
Subject: Re: [nvda] NVDA with which anti-virus

Hi, Joe,

I used to use MSE when I was running windows 7. Now that I have windows 10,
I use windows defender.

Hope this helps.

Rosemarie



-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Joe
Paton
Sent: Saturday, July 02, 2016 2:08 PM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA with which anti-virus

Hello,

Which anti-virus is most accessible with nvda, running windows 7 64-bit?

I've have serious access issues with eset's nod32, so much so, that where
there an infultration, nvda would be unable to assist.

So what do folks use please?

Thanks.

p.s. if you've seen a similar post before, My mistake because I didn't see
my post so suspect these are not getting through.

Joe








Re: antivirus / i use a v g

Gene
 

How do all the people who say it works fine for me know.  You don't know if you only scan with the program you are using.  Saying it works fine for me means nothing.  I could install the worst antimalware program in existence and, if it is accessible, I could scan my system regularly.  No matter how poor a job it did, if it indicates that my machine is free of malware, I could then write that it does a good job.  This is classic circular reasoning.  The only way to know if a program is protecting you reasonably well, aside from reading reliable reviews, is to have something you know is good scan your computer such as an on line scanner or more than one.  Such comments as MSEe works fine for me are meaningless unless we know what they are based on.  MSEE is considered by many knowledgeable computer advisors to be a substandard program.  Is it good enough to protect people from the threats they are likely to run into?  I don't know but if you are considering using it, you should know that it scores very low in detection tests, or it did last I saw anything about this six months or a year ago.  those interested can check to see what the current situation is.  I doubt it's changed much.  . 
 
You cannot make an informed decision based on comments such as it works well for me.  What does that mean and how are people determining that it works well for them. 
 
The Essett online scanner was quite reasonably accessible when I tried it awhile ago.  I don't know what the current state of the program is.  People are discussing various programs and no one, to my recollection is giving any meaningful evaluations of how the programs work such as from properly done reviews or based on what their program finds compared to on line scanners and malware bytes. 
 
Without such discussions, you may be able to get a good idea of the quality of various programs users consider accessible enough to use by doing searches for reviews of specific names of programs.  For example, if AVG is said to work well and be accessible by a user, do a Google search for AVG review.  Look at what reputable sites say.  If you don't know what sites are reputable, asking here may get you information.  the information from these sorts of list discussions may help you know which programs are accessible.  But such list discussions, in my experience, seldom give any or hardly any information about the quality of such programs that can be evaluated in a meaningful way. 
 
Gene

----- Original Message -----
Sent: Saturday, July 02, 2016 5:51 PM
Subject: Re: [nvda] antivirus / i use a v g

I also use MSE.  It works fine for me.  I'm not sure if I will have to
use a different program once Windows 10 is installed.


Pauline



On 7/1/2016 1:41 PM, Arlene wrote:
> Hi, I use mse it works fine for me. I did use avg and it got very
> inaccisable.
>
> -----Original Message-----
> From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Angela
> Delicata
> Sent: July-01-16 10:18 AM
> To: nvda@nvda.groups.io
> Subject: Re: [nvda] antivirus / i use a v g
>
> AVG is the worst I have ever used.
>
>
> Il 01/07/2016 19:11, Richard Kuzma via Groups.io ha scritto:
>
>> I use avg and it works pretty good for me
>>
>>
>
> ---
> Questa e-mail è stata controllata per individuare virus con Avast antivirus.
> https://www.avast.com/antivirus
>
>
>
>
>
>
>
>




Your First NVDA App Module: session 2 archived, session 3 will be held on July 16, 2016

 

Hi everyone,

 

The second session from Your First NVDA App Module course (scripts, input and output) has been archived:

http://www.nvda-kr.org/files/nvdaAppMod2.mp3

 

The next session of the course (objects, object hierarchy and traversal) will be held on July 16, 2016 at 11 AM Pacific (18:00 UTC) at NVDA Korea TeamTalk server. Hope to meet many of you then.

Cheers,

Joseph


Re: antivirus / i use a v g

Arlene
 

Hi, You can use it or defender. You have to run one or the other. Cause they
both are the same. So, if you do end up with tem. Just use defender.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Pauline
Smith
Sent: July-02-16 3:51 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] antivirus / i use a v g

I also use MSE. It works fine for me. I'm not sure if I will have to
use a different program once Windows 10 is installed.


Pauline



On 7/1/2016 1:41 PM, Arlene wrote:
Hi, I use mse it works fine for me. I did use avg and it got very
inaccisable.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Angela
Delicata
Sent: July-01-16 10:18 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] antivirus / i use a v g

AVG is the worst I have ever used.


Il 01/07/2016 19:11, Richard Kuzma via Groups.io ha scritto:

I use avg and it works pretty good for me

---
Questa e-mail è stata controllata per individuare virus con Avast
antivirus.
https://www.avast.com/antivirus








Re: NVDA with which anti-virus

Arlene
 

I use mse. It's like defender. I'm using 7.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Rosemarie Chavarria
Sent: July-02-16 4:12 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA with which anti-virus

Hi, Joe,

I used to use MSE when I was running windows 7. Now that I have windows 10,
I use windows defender.

Hope this helps.

Rosemarie



-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Joe
Paton
Sent: Saturday, July 02, 2016 2:08 PM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA with which anti-virus

Hello,

Which anti-virus is most accessible with nvda, running windows 7 64-bit?

I've have serious access issues with eset's nod32, so much so, that where
there an infultration, nvda would be unable to assist.

So what do folks use please?

Thanks.

p.s. if you've seen a similar post before, My mistake because I didn't see
my post so suspect these are not getting through.

Joe


Re: NVDA with which anti-virus

Rosemarie Chavarria
 

Hi, Joe,

I used to use MSE when I was running windows 7. Now that I have windows 10,
I use windows defender.

Hope this helps.

Rosemarie

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Joe
Paton
Sent: Saturday, July 02, 2016 2:08 PM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA with which anti-virus

Hello,

Which anti-virus is most accessible with nvda, running windows 7 64-bit?

I've have serious access issues with eset's nod32, so much so, that where
there an infultration, nvda would be unable to assist.

So what do folks use please?

Thanks.

p.s. if you've seen a similar post before, My mistake because I didn't see
my post so suspect these are not getting through.

Joe


Re: antivirus / i use a v g

Pauline Smith
 

I also use MSE. It works fine for me. I'm not sure if I will have to use a different program once Windows 10 is installed.


Pauline

On 7/1/2016 1:41 PM, Arlene wrote:
Hi, I use mse it works fine for me. I did use avg and it got very
inaccisable.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Angela
Delicata
Sent: July-01-16 10:18 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] antivirus / i use a v g

AVG is the worst I have ever used.


Il 01/07/2016 19:11, Richard Kuzma via Groups.io ha scritto:

I use avg and it works pretty good for me

---
Questa e-mail è stata controllata per individuare virus con Avast antivirus.
https://www.avast.com/antivirus







Re: how to find out what's new since I last update the next snapshot

Sukil Etxenike <sukiletxe@...>
 

Hi,

You can go to <https://github.com/nvaccess/nvda/commits/master> for the master branch and <https://github.com/nvaccess/nvda/commits/next> for the next branch. Then, search for the number after the comma in your version. In your case, next-13306,69e86e83, you will need to search for 69e86e83. Then, go up from that point in the page and you'll see the changes.

Hope this helps,

Sukil

El 01/07/2016 a las 4:23, Stephen escribió:
Hi there.
I would like to get a list of what's changed since (NVDA)
Version: next-13306,69e86e83
before downloading the latest next snapshot. Is there an easy way of doing this?
Thanks.



NVDA with which anti-virus

Joe Paton
 

Hello,

Which anti-virus is most accessible with nvda, running windows 7 64-bit?

I've have serious access issues with eset's nod32, so much so, that where there
an infultration, nvda would be unable to assist.

So what do folks use please?

Thanks.

p.s. if you've seen a similar post before, My mistake because I didn't see my
post so suspect these are not getting through.

Joe


Re: a quick question about a refreshabraille 18 display

Sukil Etxenike <sukiletxe@...>
 

Hi,

I don't have a Braille display at hand now, but I suspect you can configure it via the input gestures dialog, in the Preferences submenu, in the NVDA menu.

Regares,

Sukil

El 30/06/2016 a las 22:32, brandon escribió:
Hello all,
This is just a quick question does anyone know how to make a refreshabraille 18 have a backspace key?
I know you can do enter but you cannot do a backspace command with this display is there a work around for this?
Thanks in advance,
Brandon,
Reed


Re: Tiflotecnia vocalizer update

Aidan <aidan.smarttalk@...>
 

Well, my biggest problem with teflotecnia version is that they don't
even have kate in there UK voices but they then ask so much? Glad I
got the CodeFactory one instead as it have Kate.

On 02/07/2016, Greg Wocher <gwocher@gwocher.com> wrote:
Hello,,

Go to:

http://harposoftware.com/en/english-usa/202-Nathan-Nuance-Voice.html


At this website you can download a trial version. Once the trial is up
it does cost $45 for the voice. They have all kinds of other voices as
well.


Regards,

Greg WOcher



On 7/2/2016 2:02 PM, Arianna Sepulveda wrote:
Greg, how have you been trialing a SAPI version of this voice?


Thanks,
Ari

On Jul 2, 2016, at 8:19 AM, Greg Wocher <gwocher@gwocher.com> wrote:

Hello,

I thought there was suppose to be an update to the Tiflotecnia vocalizer
last month in June. Did this happen? I was also wondering if the Nathan
voice is one of the new ones added? I have been trialing a Sapi version
of it and I really like it.


Regards,

Greg Wocher






--
Facebook: m.facebook.com/aidan.maher92
Skype: andries4451
Twitter: smarttalk7
Audioboo: www.audioboo.com/DjSpotlight


Re: opening links within a message

Arlene
 

Well, if they wanted you in general who has windows ten. Then they should
finish it!

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Shaun
Everiss
Sent: July-02-16 5:08 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] opening links within a message

Well ms didn't want internet exploder and I aggree with them.
THe problem is the edge system was never finnished and since they keep
working with it and the new uia library who knows.
I wouldn't be surprised if everyone ditches all that and uses their own
drivers again.



On 2/07/2016 9:26 p.m., Brian's Mail list account wrote:
I wonder if there is some way to uninstall it. I doubt it as just a few
of the applets in windows seem to use its code to display things very
badly in most cases!
To be honest I simply do not understand why we needed yet another
browser at all.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message ----- From: "Arlene" <nedster66@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Saturday, July 02, 2016 1:22 AM
Subject: Re: [nvda] opening links within a message


Oh that edge! I hope one day it will stop taking over! I hope
Microsoft will
provide a solution to have any browser take over as you choose. Not Edge
trying to take over. There has to be a work around to have any
browser be
default without Edge trying to take over.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Pascal
Lambert
Sent: July-01-16 2:50 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] opening links within a message

Strange but it still happens! Edge wants to take over!
Blessings
Pascal

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Jacob
Kruger
Sent: Friday, July 1, 2016 6:30 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] opening links within a message

Happens to me as well, at times, and seems like edge keeps on trying
to take
back control of protocol types, etc.

As in, while, maybe an htttp link will still open with either firefox, or
chrome, depending on which I have set as default browser, but, then an
https
link will open in edge, etc. etc.

Haven't found a way to stop this from happening consistently as of
yet, but
anyway.

Stay well

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."

----- Original Message -----
From: "Arlene" <nedster66@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Friday, July 1, 2016 7:43 PM
Subject: Re: [nvda] opening links within a message


That is strange. If you have firefox set as your browser then it
should be
it. Not edge.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Pascal
Lambert
Sent: July-01-16 7:45 AM
To: nvda@nvda.groups.io
Subject: [nvda] opening links within a message

Hi,
I have the browser set to Firefox. However when I click on a link
within
an
email message, it is opened with MSFT Edge. This does not happen all
the
time.
Any idea?
Thanks and blessings
Pascal

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Jacob
Kruger
Sent: Friday, July 1, 2016 10:55 AM
To: nvda@nvda.groups.io
Subject: Re: Windows logon screen: was [nvda] Problem with Secure
Desktop

Windows key + Enter should, hopefully, get narrator to start talking,
and,
it should be able to read some of the logon screen to you, but, only
really
allows you to navigate using tab, and arrow keys.

Good luck

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."

----- Original Message -----
From: "John J. Boyer" <john.boyer@abilitiessoft.org>
To: <nvda@nvda.groups.io>
Sent: Friday, July 1, 2016 2:22 PM
Subject: Re: Windows logon screen: was [nvda] Problem with Secure
Desktop


I followed the instructions in the mesage below to copy the current
configuration to the Windows logon screen. However, i missed the
checkbox to have NVDA work at that screen. Now after making some
changes, including setting Windows to never slep, it boots directly
into
the logon dialogue and says Configuring Windows. That is the NVDA
mesage, but it won't do anything more. Is there a way to get past this
dialogue and proceed to a normal boot?

Thanks,
John

On Mon, Jun 27, 2016 at 10:36:32PM -0700, Tyler Spivey wrote:
Secure desktop is the desktop for things like UAC screens, and the
Windows logon screen.

This uses a completely different NVDA profile, with a separate
speech/braille config. By default it's set to espeak.

My first guess is your machine is going to sleep, and it's asking for
your password when it wakes up. You can turn off sleep in the power
options.

If you want to copy the current configuration to the secure
desktop, so
it uses the same speech/braille settings as the logged in NVDA, you
can
do that.
* Press ctrl+NVDA+G, to open the NVDA General settings.
* Press the button that says Use currently saved settings on the logon
and other secure screens (requires administrator privileges).
* If the secure desktop appears during this process, it's probably an
UAC
prompt. Press alt y.
If you want NVDA to work at the logon screen, the General settings
dialog
has a checkbox for that as well.

On 6/27/2016 9:54 PM, John J. Boyer wrote:
If I don't do anything on my machine for a while it goes to Secure
Desktop, whatever that is, and NVDA is not working. The only way
I > can
get out of it is to shut down the machine and turn it back on. Does
anyone know what Secure Desktop is and how to get rid of it?

Thanks,
John

--
John J. Boyer; President,
AbilitiesSoft, Inc.
Email: john.boyer@abilitiessoft.org
Website: http://www.abilitiessoft.org
Status: 501(C)(3) Nonprofit
Location: Madison, Wisconsin USA
Mission: To develop softwares and provide STEM services for people with
disabilities which are available at no cost.


























.


Re: Tiflotecnia vocalizer update

Greg Wocher
 

Hello,,

Go to:

http://harposoftware.com/en/english-usa/202-Nathan-Nuance-Voice.html


At this website you can download a trial version. Once the trial is up it does cost $45 for the voice. They have all kinds of other voices as well.


Regards,

Greg WOcher

On 7/2/2016 2:02 PM, Arianna Sepulveda wrote:
Greg, how have you been trialing a SAPI version of this voice?


Thanks,
Ari

On Jul 2, 2016, at 8:19 AM, Greg Wocher <gwocher@gwocher.com> wrote:

Hello,

I thought there was suppose to be an update to the Tiflotecnia vocalizer last month in June. Did this happen? I was also wondering if the Nathan voice is one of the new ones added? I have been trialing a Sapi version of it and I really like it.


Regards,

Greg Wocher




Re: Tiflotecnia vocalizer update

Arianna Sepulveda
 

Greg, how have you been trialing a SAPI version of this voice?


Thanks,
Ari

On Jul 2, 2016, at 8:19 AM, Greg Wocher <gwocher@gwocher.com> wrote:

Hello,

I thought there was suppose to be an update to the Tiflotecnia vocalizer last month in June. Did this happen? I was also wondering if the Nathan voice is one of the new ones added? I have been trialing a Sapi version of it and I really like it.


Regards,

Greg Wocher




Re: A couple of NVDA questions

Arlene
 

Hi, I can answer the anti virus question. MSE works. I'm using windows 7 64
bit with the latest version of NVDA and jaws 14.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Joe
Paton
Sent: July-02-16 7:00 AM
To: nvda@nvda.groups.io
Subject: [nvda] A couple of NVDA questions

Good Saturday afternoon to you.

couple of questions if I may, first, is there a preferred resolution which
optimises performance of N V D A on windows 7 64-bit?

second, which anti-virus is most accessible for Use with nvda?

It is a concern to me that we may need to consider access to a programme,
rather
thatn if that programme is the best solution for the task in hand. But
there we are, tht's what it is. Something that regular computer users don't
have to
consider, a balance between accessibility and overall functionality.

Thanks.

Joe


Re: opening links within a message

Arlene
 

Well then, I guess it depends on your system! Right?

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Peter
Beasley
Sent: July-02-16 10:11 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] opening links within a message

There is one particular site I have this problem with so what I do is to
forward the e-mail to myself and when I open the forwarded message it works
just fine.

-----Original Message-----
From: Arlene
Sent: Saturday, July 02, 2016 5:38 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] opening links within a message

Oh that's weird. with older versions of windows you were able to pick your
browser and it stayed.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Brian's
Mail list account
Sent: July-02-16 2:20 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] opening links within a message

Most of the time I see this is when opening a link, say to a pdf file even
though pdf is set to adobe reader it still puts up edge on some links but
not all of them.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Pascal Lambert" <casablanca_31@hotmail.com>
To: <nvda@nvda.groups.io>
Sent: Friday, July 01, 2016 10:49 PM
Subject: Re: [nvda] opening links within a message


Strange but it still happens! Edge wants to take over!
Blessings
Pascal

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Jacob
Kruger
Sent: Friday, July 1, 2016 6:30 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] opening links within a message

Happens to me as well, at times, and seems like edge keeps on trying to
take
back control of protocol types, etc.

As in, while, maybe an htttp link will still open with either firefox, or
chrome, depending on which I have set as default browser, but, then an
https
link will open in edge, etc. etc.

Haven't found a way to stop this from happening consistently as of yet,
but
anyway.

Stay well

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."

----- Original Message -----
From: "Arlene" <nedster66@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Friday, July 1, 2016 7:43 PM
Subject: Re: [nvda] opening links within a message


That is strange. If you have firefox set as your browser then it should
be
it. Not edge.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Pascal
Lambert
Sent: July-01-16 7:45 AM
To: nvda@nvda.groups.io
Subject: [nvda] opening links within a message

Hi,
I have the browser set to Firefox. However when I click on a link within
an
email message, it is opened with MSFT Edge. This does not happen all the
time.
Any idea?
Thanks and blessings
Pascal

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Jacob
Kruger
Sent: Friday, July 1, 2016 10:55 AM
To: nvda@nvda.groups.io
Subject: Re: Windows logon screen: was [nvda] Problem with Secure Desktop

Windows key + Enter should, hopefully, get narrator to start talking,
and,
it should be able to read some of the logon screen to you, but, only
really
allows you to navigate using tab, and arrow keys.

Good luck

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."

----- Original Message -----
From: "John J. Boyer" <john.boyer@abilitiessoft.org>
To: <nvda@nvda.groups.io>
Sent: Friday, July 1, 2016 2:22 PM
Subject: Re: Windows logon screen: was [nvda] Problem with Secure Desktop


I followed the instructions in the mesage below to copy the current
configuration to the Windows logon screen. However, i missed the
checkbox to have NVDA work at that screen. Now after making some
changes, including setting Windows to never slep, it boots directly into
the logon dialogue and says Configuring Windows. That is the NVDA
mesage, but it won't do anything more. Is there a way to get past this
dialogue and proceed to a normal boot?

Thanks,
John

On Mon, Jun 27, 2016 at 10:36:32PM -0700, Tyler Spivey wrote:
Secure desktop is the desktop for things like UAC screens, and the
Windows logon screen.

This uses a completely different NVDA profile, with a separate
speech/braille config. By default it's set to espeak.

My first guess is your machine is going to sleep, and it's asking for
your password when it wakes up. You can turn off sleep in the power
options.

If you want to copy the current configuration to the secure desktop, so
it uses the same speech/braille settings as the logged in NVDA, you can
do that.
* Press ctrl+NVDA+G, to open the NVDA General settings.
* Press the button that says Use currently saved settings on the logon
and other secure screens (requires administrator privileges).
* If the secure desktop appears during this process, it's probably an
UAC
prompt. Press alt y.
If you want NVDA to work at the logon screen, the General settings
dialog
has a checkbox for that as well.

On 6/27/2016 9:54 PM, John J. Boyer wrote:
If I don't do anything on my machine for a while it goes to Secure
Desktop, whatever that is, and NVDA is not working. The only way I
can
get out of it is to shut down the machine and turn it back on. Does
anyone know what Secure Desktop is and how to get rid of it?

Thanks,
John

--
John J. Boyer; President,
AbilitiesSoft, Inc.
Email: john.boyer@abilitiessoft.org
Website: http://www.abilitiessoft.org
Status: 501(C)(3) Nonprofit
Location: Madison, Wisconsin USA
Mission: To develop softwares and provide STEM services for people with
disabilities which are available at no cost.





















Re: opening links within a message

Peter Beasley
 

There is one particular site I have this problem with so what I do is to forward the e-mail to myself and when I open the forwarded message it works just fine.

-----Original Message-----
From: Arlene
Sent: Saturday, July 02, 2016 5:38 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] opening links within a message

Oh that's weird. with older versions of windows you were able to pick your
browser and it stayed.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Brian's
Mail list account
Sent: July-02-16 2:20 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] opening links within a message

Most of the time I see this is when opening a link, say to a pdf file even
though pdf is set to adobe reader it still puts up edge on some links but
not all of them.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Pascal Lambert" <casablanca_31@hotmail.com>
To: <nvda@nvda.groups.io>
Sent: Friday, July 01, 2016 10:49 PM
Subject: Re: [nvda] opening links within a message


Strange but it still happens! Edge wants to take over!
Blessings
Pascal

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Jacob
Kruger
Sent: Friday, July 1, 2016 6:30 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] opening links within a message

Happens to me as well, at times, and seems like edge keeps on trying to
take
back control of protocol types, etc.

As in, while, maybe an htttp link will still open with either firefox, or
chrome, depending on which I have set as default browser, but, then an
https
link will open in edge, etc. etc.

Haven't found a way to stop this from happening consistently as of yet,
but
anyway.

Stay well

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."

----- Original Message -----
From: "Arlene" <nedster66@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Friday, July 1, 2016 7:43 PM
Subject: Re: [nvda] opening links within a message


That is strange. If you have firefox set as your browser then it should
be
it. Not edge.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Pascal
Lambert
Sent: July-01-16 7:45 AM
To: nvda@nvda.groups.io
Subject: [nvda] opening links within a message

Hi,
I have the browser set to Firefox. However when I click on a link within
an
email message, it is opened with MSFT Edge. This does not happen all the
time.
Any idea?
Thanks and blessings
Pascal

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Jacob
Kruger
Sent: Friday, July 1, 2016 10:55 AM
To: nvda@nvda.groups.io
Subject: Re: Windows logon screen: was [nvda] Problem with Secure Desktop

Windows key + Enter should, hopefully, get narrator to start talking,
and,
it should be able to read some of the logon screen to you, but, only
really
allows you to navigate using tab, and arrow keys.

Good luck

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."

----- Original Message -----
From: "John J. Boyer" <john.boyer@abilitiessoft.org>
To: <nvda@nvda.groups.io>
Sent: Friday, July 1, 2016 2:22 PM
Subject: Re: Windows logon screen: was [nvda] Problem with Secure Desktop


I followed the instructions in the mesage below to copy the current
configuration to the Windows logon screen. However, i missed the
checkbox to have NVDA work at that screen. Now after making some
changes, including setting Windows to never slep, it boots directly into
the logon dialogue and says Configuring Windows. That is the NVDA
mesage, but it won't do anything more. Is there a way to get past this
dialogue and proceed to a normal boot?

Thanks,
John

On Mon, Jun 27, 2016 at 10:36:32PM -0700, Tyler Spivey wrote:
Secure desktop is the desktop for things like UAC screens, and the
Windows logon screen.

This uses a completely different NVDA profile, with a separate
speech/braille config. By default it's set to espeak.

My first guess is your machine is going to sleep, and it's asking for
your password when it wakes up. You can turn off sleep in the power
options.

If you want to copy the current configuration to the secure desktop, so
it uses the same speech/braille settings as the logged in NVDA, you can
do that.
* Press ctrl+NVDA+G, to open the NVDA General settings.
* Press the button that says Use currently saved settings on the logon
and other secure screens (requires administrator privileges).
* If the secure desktop appears during this process, it's probably an
UAC
prompt. Press alt y.
If you want NVDA to work at the logon screen, the General settings
dialog
has a checkbox for that as well.

On 6/27/2016 9:54 PM, John J. Boyer wrote:
If I don't do anything on my machine for a while it goes to Secure
Desktop, whatever that is, and NVDA is not working. The only way I
can
get out of it is to shut down the machine and turn it back on. Does
anyone know what Secure Desktop is and how to get rid of it?

Thanks,
John

--
John J. Boyer; President,
AbilitiesSoft, Inc.
Email: john.boyer@abilitiessoft.org
Website: http://www.abilitiessoft.org
Status: 501(C)(3) Nonprofit
Location: Madison, Wisconsin USA
Mission: To develop softwares and provide STEM services for people with
disabilities which are available at no cost.





















Re: opening links within a message

Arlene
 

I don't either. I guess Edge is like IE

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Brian's
Mail list account
Sent: July-02-16 2:26 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] opening links within a message

I wonder if there is some way to uninstall it. I doubt it as just a few of
the applets in windows seem to use its code to display things very badly in
most cases!
To be honest I simply do not understand why we needed yet another browser
at all.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Arlene" <nedster66@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Saturday, July 02, 2016 1:22 AM
Subject: Re: [nvda] opening links within a message


Oh that edge! I hope one day it will stop taking over! I hope Microsoft
will
provide a solution to have any browser take over as you choose. Not Edge
trying to take over. There has to be a work around to have any browser be
default without Edge trying to take over.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Pascal
Lambert
Sent: July-01-16 2:50 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] opening links within a message

Strange but it still happens! Edge wants to take over!
Blessings
Pascal

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Jacob
Kruger
Sent: Friday, July 1, 2016 6:30 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] opening links within a message

Happens to me as well, at times, and seems like edge keeps on trying to
take
back control of protocol types, etc.

As in, while, maybe an htttp link will still open with either firefox, or
chrome, depending on which I have set as default browser, but, then an
https
link will open in edge, etc. etc.

Haven't found a way to stop this from happening consistently as of yet,
but
anyway.

Stay well

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."

----- Original Message -----
From: "Arlene" <nedster66@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Friday, July 1, 2016 7:43 PM
Subject: Re: [nvda] opening links within a message


That is strange. If you have firefox set as your browser then it should
be
it. Not edge.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Pascal
Lambert
Sent: July-01-16 7:45 AM
To: nvda@nvda.groups.io
Subject: [nvda] opening links within a message

Hi,
I have the browser set to Firefox. However when I click on a link within
an
email message, it is opened with MSFT Edge. This does not happen all the
time.
Any idea?
Thanks and blessings
Pascal

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Jacob
Kruger
Sent: Friday, July 1, 2016 10:55 AM
To: nvda@nvda.groups.io
Subject: Re: Windows logon screen: was [nvda] Problem with Secure Desktop

Windows key + Enter should, hopefully, get narrator to start talking,
and,
it should be able to read some of the logon screen to you, but, only
really
allows you to navigate using tab, and arrow keys.

Good luck

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."

----- Original Message -----
From: "John J. Boyer" <john.boyer@abilitiessoft.org>
To: <nvda@nvda.groups.io>
Sent: Friday, July 1, 2016 2:22 PM
Subject: Re: Windows logon screen: was [nvda] Problem with Secure Desktop


I followed the instructions in the mesage below to copy the current
configuration to the Windows logon screen. However, i missed the
checkbox to have NVDA work at that screen. Now after making some
changes, including setting Windows to never slep, it boots directly into
the logon dialogue and says Configuring Windows. That is the NVDA
mesage, but it won't do anything more. Is there a way to get past this
dialogue and proceed to a normal boot?

Thanks,
John

On Mon, Jun 27, 2016 at 10:36:32PM -0700, Tyler Spivey wrote:
Secure desktop is the desktop for things like UAC screens, and the
Windows logon screen.

This uses a completely different NVDA profile, with a separate
speech/braille config. By default it's set to espeak.

My first guess is your machine is going to sleep, and it's asking for
your password when it wakes up. You can turn off sleep in the power
options.

If you want to copy the current configuration to the secure desktop, so
it uses the same speech/braille settings as the logged in NVDA, you can
do that.
* Press ctrl+NVDA+G, to open the NVDA General settings.
* Press the button that says Use currently saved settings on the logon
and other secure screens (requires administrator privileges).
* If the secure desktop appears during this process, it's probably an
UAC
prompt. Press alt y.
If you want NVDA to work at the logon screen, the General settings
dialog
has a checkbox for that as well.

On 6/27/2016 9:54 PM, John J. Boyer wrote:
If I don't do anything on my machine for a while it goes to Secure
Desktop, whatever that is, and NVDA is not working. The only way I
can
get out of it is to shut down the machine and turn it back on. Does
anyone know what Secure Desktop is and how to get rid of it?

Thanks,
John

--
John J. Boyer; President,
AbilitiesSoft, Inc.
Email: john.boyer@abilitiessoft.org
Website: http://www.abilitiessoft.org
Status: 501(C)(3) Nonprofit
Location: Madison, Wisconsin USA
Mission: To develop softwares and provide STEM services for people with
disabilities which are available at no cost.
























Re: opening links within a message

Arlene
 

Oh that's weird. with older versions of windows you were able to pick your
browser and it stayed.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Brian's
Mail list account
Sent: July-02-16 2:20 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] opening links within a message

Most of the time I see this is when opening a link, say to a pdf file even
though pdf is set to adobe reader it still puts up edge on some links but
not all of them.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Pascal Lambert" <casablanca_31@hotmail.com>
To: <nvda@nvda.groups.io>
Sent: Friday, July 01, 2016 10:49 PM
Subject: Re: [nvda] opening links within a message


Strange but it still happens! Edge wants to take over!
Blessings
Pascal

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Jacob
Kruger
Sent: Friday, July 1, 2016 6:30 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] opening links within a message

Happens to me as well, at times, and seems like edge keeps on trying to
take
back control of protocol types, etc.

As in, while, maybe an htttp link will still open with either firefox, or
chrome, depending on which I have set as default browser, but, then an
https
link will open in edge, etc. etc.

Haven't found a way to stop this from happening consistently as of yet,
but
anyway.

Stay well

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."

----- Original Message -----
From: "Arlene" <nedster66@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Friday, July 1, 2016 7:43 PM
Subject: Re: [nvda] opening links within a message


That is strange. If you have firefox set as your browser then it should
be
it. Not edge.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Pascal
Lambert
Sent: July-01-16 7:45 AM
To: nvda@nvda.groups.io
Subject: [nvda] opening links within a message

Hi,
I have the browser set to Firefox. However when I click on a link within
an
email message, it is opened with MSFT Edge. This does not happen all the
time.
Any idea?
Thanks and blessings
Pascal

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Jacob
Kruger
Sent: Friday, July 1, 2016 10:55 AM
To: nvda@nvda.groups.io
Subject: Re: Windows logon screen: was [nvda] Problem with Secure Desktop

Windows key + Enter should, hopefully, get narrator to start talking,
and,
it should be able to read some of the logon screen to you, but, only
really
allows you to navigate using tab, and arrow keys.

Good luck

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."

----- Original Message -----
From: "John J. Boyer" <john.boyer@abilitiessoft.org>
To: <nvda@nvda.groups.io>
Sent: Friday, July 1, 2016 2:22 PM
Subject: Re: Windows logon screen: was [nvda] Problem with Secure Desktop


I followed the instructions in the mesage below to copy the current
configuration to the Windows logon screen. However, i missed the
checkbox to have NVDA work at that screen. Now after making some
changes, including setting Windows to never slep, it boots directly into
the logon dialogue and says Configuring Windows. That is the NVDA
mesage, but it won't do anything more. Is there a way to get past this
dialogue and proceed to a normal boot?

Thanks,
John

On Mon, Jun 27, 2016 at 10:36:32PM -0700, Tyler Spivey wrote:
Secure desktop is the desktop for things like UAC screens, and the
Windows logon screen.

This uses a completely different NVDA profile, with a separate
speech/braille config. By default it's set to espeak.

My first guess is your machine is going to sleep, and it's asking for
your password when it wakes up. You can turn off sleep in the power
options.

If you want to copy the current configuration to the secure desktop, so
it uses the same speech/braille settings as the logged in NVDA, you can
do that.
* Press ctrl+NVDA+G, to open the NVDA General settings.
* Press the button that says Use currently saved settings on the logon
and other secure screens (requires administrator privileges).
* If the secure desktop appears during this process, it's probably an
UAC
prompt. Press alt y.
If you want NVDA to work at the logon screen, the General settings
dialog
has a checkbox for that as well.

On 6/27/2016 9:54 PM, John J. Boyer wrote:
If I don't do anything on my machine for a while it goes to Secure
Desktop, whatever that is, and NVDA is not working. The only way I
can
get out of it is to shut down the machine and turn it back on. Does
anyone know what Secure Desktop is and how to get rid of it?

Thanks,
John

--
John J. Boyer; President,
AbilitiesSoft, Inc.
Email: john.boyer@abilitiessoft.org
Website: http://www.abilitiessoft.org
Status: 501(C)(3) Nonprofit
Location: Madison, Wisconsin USA
Mission: To develop softwares and provide STEM services for people with
disabilities which are available at no cost.