Date   

Re: is it possible to safe configuration profiles?

 

hi.
in the preferences and then general options, make shure that Save
configuration on exit is checked (which is checked by default)
after exiting nvda, you have all settings and configurations that you
set before.
but if you make portable version of nvda and then install it in
different computers, also you can transfer all of your preferences to
other systems.
hope that help.
thanks and God bless you.

On 8/6/16, P. Otter <pam.otter@gmail.com> wrote:
ok, but it is'nt possible to safe the profiles to import them on my
other machines?

i don't want to use a portable version on the other computers because
there are less options on a portable version.

i've allready nvda installed on the other machines.

i only want to safe the profiles.

cheers and thanks.

paul otter



Op 6-8-2016 om 16:50 schreef Salva Doménech Miguel via Groups.io:
hi.
yep, you can save a NVDA Portable Version and install the portable version
in the other computer and use the profiles.

Cheers
Salva

El 6 ago 2016, a las 16:02, P. Otter <pam.otter@gmail.com> escribió:

hello all,

is it possible to safe the made configuration profiles so that i can use
it on other computers?

i've 3 computers working. on all of them nvda is running.

on one i've made some profiles, i want to use them on the other
computers.

but when i look at program files\nvda\configuration\profiles, this map is
empty.

what can i do to find and safe it on a stick to implement it on the other
machines?

thanks in advance!

cheers

paul otter









--
Those who follow the Messenger-Prophet, the Ummi, whom they find
written down with them in the Taurat and the Injeel [who] enjoins them
good and forbids them evil, and makes lawful to them the good things
and makes unlawful to them impure things, and removes from them their
burden and the shackles which were upon them; so [as for] those who
believe in him and honor him and help him, and follow the light which
has been sent down with him, these it is that are the successful.
holy quran, chapter 7, verse 157.
best website for studying islamic book in different languages
al-islam.org


Re: new user with a question about cursors

 

hi again.
sorry for my mistake.
i ment review cursor excuse me again.
for me two items which i mentioned are checked and i dont have any
problem in this case.

On 8/6/16, Chris Mullins <cjmullins29@gmail.com> wrote:
Hi
could you check the settings of the system cursor. If you type 'cursor'
into cortana you will see where you can set blink rate and thickness. It
may have been altered to values which make it difficult for the screen
reader to track. As a guide, my settings are a blink rate of 63 and a
thickness of 10.

Cheers
Chris



-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Michael
Capelle
Sent: 6 August 2016 13:53
To: nvda@nvda.groups.io
Subject: Re: [nvda] new user with a question about cursors

i am not seeing those options.
----- Original Message -----
From: "nasrin khaksar" <nasrinkhaksar3@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Saturday, August 06, 2016 7:40 AM
Subject: Re: [nvda] new user with a question about cursors


hi.
go to nvda preferences object presentation, press enter on it and see
the first two options which are system focus and system caret.
they should be checked.
if they are uncheck, check them with space key.
God bless you!

On 8/5/16, Rosemarie Chavarria <knitqueen2007@gmail.com> wrote:
Hi, Chris,


Did you try hitting insert down-arrow to read a document? I don't know
why NVDA isn't seeing the cursor.


Rosemarie




On 8/4/2016 7:42 PM, Chris Judd wrote:
Hi all,
I’ve been using NVDA for the past 2 days now, and I love it!
I was wondering, when ever I am reading something, and I press control
home to go to the top of the document how can I get the cursors to
match where I am going? I press my up and down arrows, but they are
in the same place where I left off.
I’m sorry if this isn’t making any sense, but I’m new to NVDA, so I’m
learning.
Thanks,
Chris

--
Those who follow the Messenger-Prophet, the Ummi, whom they find
written down with them in the Taurat and the Injeel [who] enjoins them
good and forbids them evil, and makes lawful to them the good things
and makes unlawful to them impure things, and removes from them their
burden and the shackles which were upon them; so [as for] those who
believe in him and honor him and help him, and follow the light which
has been sent down with him, these it is that are the successful.
holy quran, chapter 7, verse 157.
best website for studying islamic book in different languages
al-islam.org









--
Those who follow the Messenger-Prophet, the Ummi, whom they find
written down with them in the Taurat and the Injeel [who] enjoins them
good and forbids them evil, and makes lawful to them the good things
and makes unlawful to them impure things, and removes from them their
burden and the shackles which were upon them; so [as for] those who
believe in him and honor him and help him, and follow the light which
has been sent down with him, these it is that are the successful.
holy quran, chapter 7, verse 157.
best website for studying islamic book in different languages
al-islam.org


Re: is it possible to safe configuration profiles?

P. Otter
 

ok, but it is'nt possible to safe the profiles to import them on my other machines?

i don't want to use a portable version on the other computers because there are less options on a portable version.

i've allready nvda installed on the other machines.

i only want to safe the profiles.

cheers and thanks.

paul otter



Op 6-8-2016 om 16:50 schreef Salva Doménech Miguel via Groups.io:

hi.
yep, you can save a NVDA Portable Version and install the portable version in the other computer and use the profiles.

Cheers
Salva

El 6 ago 2016, a las 16:02, P. Otter <pam.otter@gmail.com> escribió:

hello all,

is it possible to safe the made configuration profiles so that i can use it on other computers?

i've 3 computers working. on all of them nvda is running.

on one i've made some profiles, i want to use them on the other computers.

but when i look at program files\nvda\configuration\profiles, this map is empty.

what can i do to find and safe it on a stick to implement it on the other machines?

thanks in advance!

cheers

paul otter






Re: is it possible to safe configuration profiles?

Salva Doménech Miguel <kibayasd@...>
 

hi.
yep, you can save a NVDA Portable Version and install the portable version in the other computer and use the profiles.

Cheers
Salva

El 6 ago 2016, a las 16:02, P. Otter <pam.otter@gmail.com> escribió:

hello all,

is it possible to safe the made configuration profiles so that i can use it on other computers?

i've 3 computers working. on all of them nvda is running.

on one i've made some profiles, i want to use them on the other computers.

but when i look at program files\nvda\configuration\profiles, this map is empty.

what can i do to find and safe it on a stick to implement it on the other machines?

thanks in advance!

cheers

paul otter





Re: State of play with NVDA and Skype

Lino Morales
 

Desktop app for Skype works fine with NVDA master branch. Skype Preview also works fine with the new WIN 10 anniversary update.


On 8/6/2016 9:20 AM, Christopher Bartlett wrote:
I have Win 10 (latest build) and am running the most recent beta of NVDA.  What is the state of accessibility of Skype with this combo?  What if anything do I need to do to make Skype more usable?  Which Skype app works best?

Chris Bartlett


--
Christopher Bartlett


is it possible to safe configuration profiles?

P. Otter
 

hello all,

is it possible to safe the made configuration profiles so that i can use it on other computers?

i've 3 computers working. on all of them nvda is running.

on one i've made some profiles, i want to use them on the other computers.

but when i look at program files\nvda\configuration\profiles, this map is empty.

what can i do to find and safe it on a stick to implement it on the other machines?

thanks in advance!

cheers

paul otter


is it possible to safe configuration profiles?

P. Otter
 

hello all,

is it possible to safe the made configuration profiles so that i can use it on other computers?

i've 3 computers working. on all of them nvda is running.

on one i've made some profiles, i want to use them on the other computers.

but when i look at program files\nvda\configuration\profiles, this map is empty.

what can i do to find and safe it on a stick to implement it on the other machines?

thanks in advance!

cheers

paul otter


Re: State of play with NVDA and Skype

P. Otter
 

hello,

you can go into skype, there in the settings you can find as last item accessibility, there you can enable accessibility normaly it is off.

after checket, you can safe it and exit.

cheers

paul otter



Op 6-8-2016 om 15:20 schreef Christopher Bartlett:

I have Win 10 (latest build) and am running the most recent beta of NVDA.  What is the state of accessibility of Skype with this combo?  What if anything do I need to do to make Skype more usable?  Which Skype app works best?

Chris Bartlett


--
Christopher Bartlett


Re: new user with a question about cursors

Chris Mullins
 

Hi
could you check the settings of the system cursor. If you type 'cursor' into cortana you will see where you can set blink rate and thickness. It may have been altered to values which make it difficult for the screen reader to track. As a guide, my settings are a blink rate of 63 and a thickness of 10.

Cheers
Chris

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Michael Capelle
Sent: 6 August 2016 13:53
To: nvda@nvda.groups.io
Subject: Re: [nvda] new user with a question about cursors

i am not seeing those options.
----- Original Message -----
From: "nasrin khaksar" <nasrinkhaksar3@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Saturday, August 06, 2016 7:40 AM
Subject: Re: [nvda] new user with a question about cursors


hi.
go to nvda preferences object presentation, press enter on it and see
the first two options which are system focus and system caret.
they should be checked.
if they are uncheck, check them with space key.
God bless you!

On 8/5/16, Rosemarie Chavarria <knitqueen2007@gmail.com> wrote:
Hi, Chris,


Did you try hitting insert down-arrow to read a document? I don't know
why NVDA isn't seeing the cursor.


Rosemarie




On 8/4/2016 7:42 PM, Chris Judd wrote:
Hi all,
I’ve been using NVDA for the past 2 days now, and I love it!
I was wondering, when ever I am reading something, and I press control
home to go to the top of the document how can I get the cursors to
match where I am going? I press my up and down arrows, but they are
in the same place where I left off.
I’m sorry if this isn’t making any sense, but I’m new to NVDA, so I’m
learning.
Thanks,
Chris

--
Those who follow the Messenger-Prophet, the Ummi, whom they find
written down with them in the Taurat and the Injeel [who] enjoins them
good and forbids them evil, and makes lawful to them the good things
and makes unlawful to them impure things, and removes from them their
burden and the shackles which were upon them; so [as for] those who
believe in him and honor him and help him, and follow the light which
has been sent down with him, these it is that are the successful.
holy quran, chapter 7, verse 157.
best website for studying islamic book in different languages
al-islam.org


State of play with NVDA and Skype

Christopher Bartlett
 

I have Win 10 (latest build) and am running the most recent beta of NVDA.  What is the state of accessibility of Skype with this combo?  What if anything do I need to do to make Skype more usable?  Which Skype app works best?

Chris Bartlett


--
Christopher Bartlett


Re: new user with a question about cursors

Gene
 

That is not correct.  You are discussing two settings for NVDA review settings which have nothing to do with this problem.  The settings you are discussing determine whether review mode follows the system focus and the system carrot.  These settings are in the review cursor settings found in the preferences menu.  No such settings are in object presentation.  Object presentation doesn't affect how NVDA follows items. 
 
The current problem is that NVDA is not seeing the cursor when in an application.  Such commands as control home don't change where NVDA is reading when using keys such as up and down arrow keys to read.
 
Gene

----- Original Message -----
Sent: Saturday, August 06, 2016 7:40 AM
Subject: Re: [nvda] new user with a question about cursors

hi.
go to nvda preferences object presentation, press enter on it and see
the first two options which are system focus and system caret.
they should be checked.
if they are uncheck, check them with space key.
God bless you!

On 8/5/16, Rosemarie Chavarria <knitqueen2007@...> wrote:
> Hi, Chris,
>
>
> Did you try hitting insert down-arrow to read a document? I don't know
> why NVDA isn't seeing the cursor.
>
>
> Rosemarie
>
>
>
>
> On 8/4/2016 7:42 PM, Chris Judd wrote:
>> Hi all,
>> I’ve been using NVDA for the past 2 days now, and I love it!
>> I was wondering, when ever I am reading something, and I press control
>> home to go to the top of the document how can I get the cursors to
>> match where I am going?  I press my up and down arrows, but they are
>> in the same place where I left off.
>> I’m sorry if this isn’t making any sense, but I’m new to NVDA, so I’m
>> learning.
>> Thanks,
>> Chris
>>
>
>


--
Those who follow the Messenger-Prophet, the Ummi, whom they find
written down with them in the Taurat and the Injeel [who] enjoins them
good and forbids them evil, and makes lawful to them the good things
and makes unlawful to them impure things, and removes from them their
burden and the shackles which were upon them; so [as for] those who
believe in him and honor him and help him, and follow the light which
has been sent down with him, these it is that are the successful.
holy quran, chapter 7, verse 157.
best website for studying islamic book in different languages
al-islam.org




Re: new user with a question about cursors

Michael Capelle <mcapelle@...>
 

i am not seeing those options.

----- Original Message -----
From: "nasrin khaksar" <nasrinkhaksar3@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Saturday, August 06, 2016 7:40 AM
Subject: Re: [nvda] new user with a question about cursors


hi.
go to nvda preferences object presentation, press enter on it and see
the first two options which are system focus and system caret.
they should be checked.
if they are uncheck, check them with space key.
God bless you!

On 8/5/16, Rosemarie Chavarria <knitqueen2007@gmail.com> wrote:
Hi, Chris,


Did you try hitting insert down-arrow to read a document? I don't know
why NVDA isn't seeing the cursor.


Rosemarie




On 8/4/2016 7:42 PM, Chris Judd wrote:
Hi all,
I’ve been using NVDA for the past 2 days now, and I love it!
I was wondering, when ever I am reading something, and I press control
home to go to the top of the document how can I get the cursors to
match where I am going? I press my up and down arrows, but they are
in the same place where I left off.
I’m sorry if this isn’t making any sense, but I’m new to NVDA, so I’m
learning.
Thanks,
Chris

--
Those who follow the Messenger-Prophet, the Ummi, whom they find
written down with them in the Taurat and the Injeel [who] enjoins them
good and forbids them evil, and makes lawful to them the good things
and makes unlawful to them impure things, and removes from them their
burden and the shackles which were upon them; so [as for] those who
believe in him and honor him and help him, and follow the light which
has been sent down with him, these it is that are the successful.
holy quran, chapter 7, verse 157.
best website for studying islamic book in different languages
al-islam.org


Re: REVO Is Now Inaccessible!

 

hi brian.
what do you mean about ccleaner?
did you mentioned that it became inaccessible?
hi every one.
i tried geek uninstaller one time and even it removed all the
executable file of my softwares.
i mean the original installer file which i install my softwares with them!
its free and accessible and even its portable!

On 8/6/16, Melissa <melissa.j.hammitt@gmail.com> wrote:
Do you have any tips on how to use the darn thing? I can't seem to do
anything with it.

Melissa

On 8/5/16, Kevin Cussick via Groups.io
<the.big.white.shepherd=googlemail.com@groups.io> wrote:
Yes, it is a nice program I have used it for a while now. and it
gets all programs not just 32bit programs.

On 05/08/2016 08:55, Ishe Chinyoka wrote:
Thanks for suggesting Bulk Crap Uninstaller: this for me works better
than Revo Uninstaller. It is fully accessible from its panel, startup
manager and all menu items. Plus it has a bulk uninstall mode that makes
life simple.

Here is the link to its homepage: http://klocmansoftware.weebly.com/

Thanks once again,

On 5 August 2016 at 02:38, Melissa <melissa.j.hammitt@gmail.com
<mailto:melissa.j.hammitt@gmail.com>> wrote:

I didn't update, but when I read this message I went to see if it
still worked.
So far I can't get to the list of installed programs, though it
tells
me how many there are. I even tried by using the admin account.
So, unless someone has a way to use it with windows 10 and NVDA
2016.1
lemme know
I'm hesitant about using another unistall utility after using revo
for, what seems like, forever.

Melissaplease.


On 8/4/16, Kevin Cussick via Groups.io
<the.big.white.shepherd=googlemail.com@groups.io
<mailto:googlemail.com@groups.io>> wrote:
> correct spelling for the replacement app is Bulk Crap Uninstaller
if you
> google this you will find.
>
> On 04/08/2016 17:14, Carlos wrote:
>> Hello All!
>>
>> Today I was going to uninstall some software with REVO
uninstaller.
>> When the program loaded it offered to upgrade to free version
2.0.
I
>> accepted and it downloaded and installed it. Upon running the new
>> version of REVO it does not work with NVDA like the previous
version did!
>>
>> So, it seems that yet another piece of software has become
>> inaccessible to NVDA!
>>
>> What other free software uninstallers are there left to will
work
>> with NVDA?
>>
>> I really do hope that someone here will figure out how to get
this
>> new version of REVO to work and will post their findings here so
that we
>> all can make good use of this new version of REVO with NVDA!
>>
>>
>>
>
>
>
>








--
Those who follow the Messenger-Prophet, the Ummi, whom they find
written down with them in the Taurat and the Injeel [who] enjoins them
good and forbids them evil, and makes lawful to them the good things
and makes unlawful to them impure things, and removes from them their
burden and the shackles which were upon them; so [as for] those who
believe in him and honor him and help him, and follow the light which
has been sent down with him, these it is that are the successful.
holy quran, chapter 7, verse 157.
best website for studying islamic book in different languages
al-islam.org


Re: new user with a question about cursors

 

hi.
go to nvda preferences object presentation, press enter on it and see
the first two options which are system focus and system caret.
they should be checked.
if they are uncheck, check them with space key.
God bless you!

On 8/5/16, Rosemarie Chavarria <knitqueen2007@gmail.com> wrote:
Hi, Chris,


Did you try hitting insert down-arrow to read a document? I don't know
why NVDA isn't seeing the cursor.


Rosemarie




On 8/4/2016 7:42 PM, Chris Judd wrote:
Hi all,
I’ve been using NVDA for the past 2 days now, and I love it!
I was wondering, when ever I am reading something, and I press control
home to go to the top of the document how can I get the cursors to
match where I am going? I press my up and down arrows, but they are
in the same place where I left off.
I’m sorry if this isn’t making any sense, but I’m new to NVDA, so I’m
learning.
Thanks,
Chris
--
Those who follow the Messenger-Prophet, the Ummi, whom they find
written down with them in the Taurat and the Injeel [who] enjoins them
good and forbids them evil, and makes lawful to them the good things
and makes unlawful to them impure things, and removes from them their
burden and the shackles which were upon them; so [as for] those who
believe in him and honor him and help him, and follow the light which
has been sent down with him, these it is that are the successful.
holy quran, chapter 7, verse 157.
best website for studying islamic book in different languages
al-islam.org


Re: 360 Total Security and how to get rid of it?

 

hi.
i recommend you use programs and features or something like this
because i am not familiar with windows ten!
or install uninstaller programs or at least give help from a sighted person.
God bless you too.

On 8/4/16, Brian's Mail list account <bglists@blueyonder.co.uk> wrote:
Does this software have a web site that has a forum on it? I've not heard of

it, but normally, if its not some kind of malware there will be a proper
uninstaller. Unfortunately it may mean using a sighted person if the
install/uninstall has not been designed very well.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Lisa P Geibel" <lisapgeibel429@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Wednesday, August 03, 2016 5:51 PM
Subject: [nvda] 360 Total Security and how to get rid of it?


Hi,
Please, please, tell me there's a way that my husband and i can get rid of

this on our own as totally blind people? We have the latest version of
JAWS as well as the latest version of NVDA and will use whichever one will

let us do this and are using Windows 10. When my husband got an iCloud
update this program got on our computer and it now is preventing us from
updating to the latest TWBlue or using it at all. It's also slowing the
computer down somewhat too. We have and use Viper and are amazed it
allowed this on here. The program is not accessible with either JAWS or
NVDA and we've tried to remove it the normal way to remove a program with

no success. If anyone can help or knows anything about this, please email

me either privately or on list? Thanks.
--
Lisa
E-Mail: lisapgeibel429@gmail.com
Facebook: http://facebook.com/ldporter1
Twitter: http://twitter.com/LisaLisa429
Philmore box shared with hubby:
773-572-7897
God bless everyone!!!





--
Those who follow the Messenger-Prophet, the Ummi, whom they find
written down with them in the Taurat and the Injeel [who] enjoins them
good and forbids them evil, and makes lawful to them the good things
and makes unlawful to them impure things, and removes from them their
burden and the shackles which were upon them; so [as for] those who
believe in him and honor him and help him, and follow the light which
has been sent down with him, these it is that are the successful.
holy quran, chapter 7, verse 157.
best website for studying islamic book in different languages
al-islam.org


Re: Anniversary windows 10 update

Gene
 

I believe Joseph Lee who has worked closely on such issues.  I believe my own experience when I go to the site and see what the procedure is. 
 
I don't know who has been on the radio but I see no reason to believe that he is correct.  Microsoft is not offering the extension by placing an icon in the system tray of blind computer users.  I haven't seen one message, on three lists, indicating that such an icon is present. 
 
Gene
----- Original Message -----

Sent: Saturday, August 06, 2016 4:35 AM
Subject: Re: [nvda] Anniversary windows 10 update

We shall see I imagine. the fact is that this person who I will not name
here, has been on radio saying this in the UK, so who do you beliieve. No
I'd not seen any post in this list saying that you have to visit a site, but
there have been issues with mail lists before of course.
 Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Gene" <gsasner@...>
To: <nvda@nvda.groups.io>
Sent: Friday, August 05, 2016 10:43 AM
Subject: Re: [nvda] Anniversary windows 10 update


I don't know who the person who is supposed to know is but either you didn't
understand what he/she said, or the person isn't actually in the know.  A
number of days ago, information was sent to the list about going to a web
site and starting the upgrade from there.  If you go to the link provided,
you get to a site with a faq about upgrading and if you follow a link to
upgrade, you are given a program to download.  While instructions are not
given, you evidently have to manually run the program and do whatever it
wants you to do to start the upgrade.  I also am skeptical that a time limit
on using this upgrade has been imposed.  I don't recall seeing any such
thing in the FAQ and given the slow progress made on Edge accessibility, I
would doubt that one month will see a fully accessible Edge.  And if Edge
were the only issue, it's easy enough to use another browser including
Internet Explorer and from a security standpoint, it may be better to use a
nonMicrosoft browser anyway.

I see no reason to have any confidence in what this person is saying.  I do
not expect any upgrades to occur in the old way.  While I wouldn't be
surprised if Microsoft might put a nag message in the system tray urging
people to upgrade, Microsoft is not going to examine every computer that is
running automatically without the user doing anything to initiate it, to
determine if a screen-reader is present.  Think about it.  Microsoft would
have to use some sort of utility or scripts to examine every computer on
every connection to the Internet automatically to determine if a
screen-reader is present and then present the upgrade option in the system
tray on computers with screen-readers.  It's unworkable.

Unless you do what is necessary to initiate the upgrade, free upgrades are
over.

Gene
----- Original Message -----

From: Brian's Mail list account
Sent: Friday, August 05, 2016 3:16 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Anniversary windows 10 update


I was told by somebody who is supposed to know that this will still occur
for anyone who has their system set to use screenreader in the ease of use
centre for at least an extra month, due to the need for the new Edge code to
be put on those machines to make them work.
 Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Chris Shook" <chris0309@...>
To: <nvda@nvda.groups.io>
Sent: Friday, August 05, 2016 4:09 AM
Subject: Re: [nvda] Anniversary windows 10 update


> Sharni:
> I don't think you have to worry about it updating automatically anymore.
> The time for the free update ended on the twenty ninth of July. I don't
> think it will update automatically anymore.
> Chris
>
>
>







Re: NVDA remote.

Felix G.
 

Hello,
I used it in the past so I might be able to help. What is it that the help file leaves unclear for you?
Kind regards,
Felix Grützmacher

Michael Capelle <mcapelle@...> schrieb am Sa., 6. Aug. 2016 um 11:36 Uhr:

does anyone have an audio tutorial on how to use the remote add-on or a text
file?
thanks.





Re: NVDA remote.

luke scholey <lukescholey@...>
 

Hi
There is a very good help file available on nvdaremote.com website. That's how I first learnt to use the remote.
Regards,
Luke

On 6 Aug 2016, at 10:36, Michael Capelle <mcapelle@charter.net> wrote:

does anyone have an audio tutorial on how to use the remote add-on or a text file?
thanks.



how to nvda remote server install

Olcay AŞCI
 

Hi

How to install a remote server nvda? What is required?


NVDA remote.

Michael Capelle <mcapelle@...>
 

does anyone have an audio tutorial on how to use the remote add-on or a text file?
thanks.