Date   

Possible issue with bash terminal in windows 10?

Mike Sedmak
 

Has anyone else run into trouble using control+shift+V to paste copied
text into a bash linux subsystem terminal window in windows 10 after
upgrading to nvda 2019.3.1?

Note the linux subsystem uses a non-standard paste as control-v is
already used by the linux system.

Thanks,
Mike


Re: NVDA Startup Screen Options

Sarah k Alawami
 

If you hit continue as admin, can you then save the settings to the start up screen? Also what version of nvda and windows are you using?

Blessings and happy Tuesday, and hope that helps

Sarah Alawami, owner of TFFP. . For more info go to our website.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on [twitch.](http://twitch.tv/ke7zum] Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page

Finally, to become a patron and help support the podcast go here

On 10 Mar 2020, at 13:53, Hicks Steven (CORNWALL IT SERVICES) via Groups.Io wrote:

Hi friends,

 

I go in to settings in NVDA and use current settings at the start up screen as I have NVDA faster than default.

It says that it needs to be a admin logged on and I am a local admin.

It doesn’t seem to save the settings, anyone have any ideas as to what could be going on please?

 



********************************************************************************************************************

This message may contain confidential information. If you are not the intended recipient please inform the
sender that you have received the message in error before deleting it.
Please do not disclose, copy or distribute information in this e-mail or take any action in relation to its contents. To do so is strictly prohibited and may be unlawful. Thank you for your co-operation.

NHSmail is the secure email and directory service available for all NHS staff in England and Scotland. NHSmail is approved for exchanging patient data and other sensitive information with NHSmail and other accredited email services.

For more information and to find out how you can switch, https://portal.nhs.net/help/joiningnhsmail


NVDA Startup Screen Options

Hicks Steven (CORNWALL IT SERVICES)
 

Hi friends,

 

I go in to settings in NVDA and use current settings at the start up screen as I have NVDA faster than default.

It says that it needs to be a admin logged on and I am a local admin.

It doesn’t seem to save the settings, anyone have any ideas as to what could be going on please?

 



********************************************************************************************************************

This message may contain confidential information. If you are not the intended recipient please inform the
sender that you have received the message in error before deleting it.
Please do not disclose, copy or distribute information in this e-mail or take any action in relation to its contents. To do so is strictly prohibited and may be unlawful. Thank you for your co-operation.

NHSmail is the secure email and directory service available for all NHS staff in England and Scotland. NHSmail is approved for exchanging patient data and other sensitive information with NHSmail and other accredited email services.

For more information and to find out how you can switch, https://portal.nhs.net/help/joiningnhsmail


locked Re: Add-on Updater 20.03 #addonrelease

 

As this topic has hopelessly strayed from its original purpose, it's now locked.

Any conversation regarding Covid-19 and the issues surrounding it should occur on the Chat Subgroup.
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Power is being told you're not loved and not being destroyed by it.

       ~ Madonna

 

 


locked Re: Add-on Updater 20.03 #addonrelease

Mallard
 

That's why full containment has been applied here.

Teh disease is not the most serous we know, but it 's very contageous, and our National Health Services risks collapsing if too many people get ill at the same time...


Ok. This is OT, so I won't continue. But it's a big thing at the momtnt, and it's going to affect all of us, one way or another, even if we don't get the virus.

Work, shopping, schools... Every aspect of our social life is affected...


Take care, and keep safe!

Ollie

On 10/03/2020 00:12, Arlene wrote:

Yes, this corna virus is scarey. If we are not careful. It can wipe out this whole world.

Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

*From: *molly the blind tech lover <mailto:brainardmolly@...>
*Sent: *March 9, 2020 3:52 PM
*To: *nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
*Subject: *Re: [nvda] Add-on Updater 20.03 #AddonRelease

This coronavirus is scary.

*From:*nvda@nvda.groups.io <nvda@nvda.groups.io> *On Behalf Of *Joseph Lee
*Sent:* Monday, March 9, 2020 5:50 PM
*To:* nvda-addons@nvda-addons.groups.io
*Subject:* [nvda] Add-on Updater 20.03 #AddonRelease

Hello all,

First, as Coronavirus is gripping the world, please wash your hands, heed travel advisories, and check and double-check information floating around the internet.

Add-on Updater 20.03 is on its way – this important (and mandatory) add-on release will show up for all NVDA users within the next 24 hours. Changes include:

* NVDA 2019.3 or later is required.
* NVDA itself will check compatibility range, not the add-on.

As I announced a few weeks ago, with Add-on Updater 20.03, all my add-ons I’m currently maintaining have graduated to Python 3 – all my add-ons will now require NVDA 2019.3 or later. As such, once Add-on Updater 20.03 shows up, old Python 2 versions of my add-ons will be removed from community add-ons website.

Cheers,

Joseph


Re: NVDA ebooks: Is there one for Access?

Mallard
 

Hello Quentin,


Many thanks. It wasn't for myself, but for a dear friend.


I'll ask him what his issues are, and in case I'll let you know.


Many thanks for your kindness, as usual..

Ciao, take cae,

Ollie

On 10/03/2020 05:04, Quentin Christensen wrote:
Hi Ollie,

We don't have one for Access I'm afraid.  I'm working on one for PowerPoint at this stage.  Once that's complete, I'm not sure what topic we'll tackle next, but of course if there is interest in Access, we wouldn't rule it out.  Anecdotally, I've only been asked about Access a few times in recent years so it's not something everyone uses as much as they used to.

If you've got specific things you are having trouble with in Access do let us know and I or someone can have a look into it of course.

Kind regards
Quentin.

On Fri, Mar 6, 2020 at 8:50 AM Mallard <mallard@... <mailto:mallard@...>> wrote:

Hello all,


Years ago I bought an ebook to learn to use NVDA with Word.


Is there anything like it for Access?


If not, is there any other material to learn how to use Access
with nVDA?


Many thanks in advance.

Ciao,

Ollie






--
Quentin Christensen
Training and Support Manager

Web: www.nvaccess.org <http://www.nvaccess.org/>
Training: https://www.nvaccess.org/shop/
Certification: https://certification.nvaccess.org/
User group: https://nvda.groups.io/g/nvda
Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess <https://twitter.com/NVAccess>


locked Re: Add-on Updater 20.03 #addonrelease

 


Hmmm but for now we have this chunk of problem.

Stats say 2 years, and all we can do is stay away from the hotspots.

China may be on the mend so maybe in a month or 2 we can restart the echonomy, reguardless of this virus, virus or now we will need to restart trading unless we want to drop to the stoneage.

I am sure all the greenies and weed smokers would be happy if we did but not me.

Over that there is little we can do but wait for a vaxine or it to burn out and it may but a lot is unknown.

Meanwhile travel and insurance do not go hand in hand and I may have to defer my holiday to hawaii maybe.

Its just possible that when returning from a holiday I may be in quarenteen at my house for a couple weeks and while at least I can continue to work and while we can prepair for it somewhat.

Being stuck somewhere paying a large sum of cash to stay there or stuck in the middle or stuck in some government phasility somewhere back home or in between is not what I would call a picknick at all.

My aunt is going to india for 2 weeks and while its not hit there yet who knows.

She is ill prepaired if she gets stuck back home and who knows..

I am seriously thinking about simply taking local trips and forgetting about travel completely at least for this year because of this uncertain virus.

Its causing a lot of problems, not to mention the pannic.

Right now the environment is secondary at least for the moment.

Not to mention the us and new zealand are now election years its just going to make it a lot more difficult.

I do agree this virus while a small concern is not as big as it could be right now and may not get much worse but its generating as much drama as the christchurch earthquake and terror attacks would if they happened all atonce and more.

Maybe if we added the srilankon tsunami as well, and us losing cricket and rugby in the same day and maybe one of the local volcanoes blowing up maybe that would be the right analogy.

Except the majority of us are still alive except we are expecting the zombies to rize and its just stupid.

What needs to happen, is for china to clear enough for the world to restart business, singapore has contained things and so the trade hub looks free.

China is on the way to containment, europe and the east are a concern of course but with the east fighting amongst itself it could be lost.

Europe well who knows.

No one is launching nukes at eachother yet but its coming.

We will eventually run out of stuff not just small stuff but big stuff.

No one is blaming anyone yet but they will unless things start up again and soon.

Everyone is being optomistic but some drugs are running out and while there are a lot of stockpiles of somethings we will start running out sooner or later.

Not to mention that half the country has hit a droubt and parts are flodded and we are not in good shape really without imports.


On 10/03/2020 6:16 pm, André wrote:

Well, let's not forget that most people don't die from an infection with SARS-CoV-2, the so-called @corona virus@. Although precise numbers are hard to get for statistical reasons,  even the worsed numbers give a 92% survival rate.

The biggest challenge with statistics is, that most people show only light symptoms which  is why many are not even tested and thus fall out of the statistics. Taking this into account, the real lethal rate might very likely be way be below 5% according to e.g. the Robert-Koch institute, a leading center in epidemiology. It for sure is very sad for those who do die, but it also means that 95% or more survive an infection.

So I think we are pretty far from the danger to  wipe out humanity with it.  Actually, the way we treat / or rather destroy / our environment is a much bigger real threat in this respect. But is is also slower, and hence easily to ignore for the moment.


Take care,
Martin


On 3/10/2020 12:12 AM, Arlene wrote:

Yes, this corna virus is scarey. If we are not careful. It can wipe out this whole world.

 

Sent from Mail for Windows 10

 

From: molly the blind tech lover
Sent: March 9, 2020 3:52 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Add-on Updater 20.03 #AddonRelease

 

This coronavirus is scary.

  

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: Monday, March 9, 2020 5:50 PM
To: nvda-addons@nvda-addons.groups.io
Subject: [nvda] Add-on Updater 20.03 #AddonRelease

 

Hello all,

 

First, as Coronavirus is gripping the world, please wash your hands, heed travel advisories, and check and double-check information floating around the internet.

 

Add-on Updater 20.03 is on its way – this important (and mandatory) add-on release will show up for all NVDA users within the next 24 hours. Changes include:

 

  • NVDA 2019.3 or later is required.
  • NVDA itself will check compatibility range, not the add-on.

 

As I announced a few weeks ago, with Add-on Updater 20.03, all my add-ons I’m currently maintaining have graduated to Python 3 – all my add-ons will now require NVDA 2019.3 or later. As such, once Add-on Updater 20.03 shows up, old Python 2 versions of my add-ons will be removed from community add-ons website.

Cheers,

Joseph

 

--
Martin Wiemer

Grabensprung 185
12683 Berlin
Germany

Tel.: +49 178 7156676


locked Re: Add-on Updater 20.03 #addonrelease

André
 

Well, let's not forget that most people don't die from an infection with SARS-CoV-2, the so-called @corona virus@. Although precise numbers are hard to get for statistical reasons,  even the worsed numbers give a 92% survival rate.

The biggest challenge with statistics is, that most people show only light symptoms which  is why many are not even tested and thus fall out of the statistics. Taking this into account, the real lethal rate might very likely be way be below 5% according to e.g. the Robert-Koch institute, a leading center in epidemiology. It for sure is very sad for those who do die, but it also means that 95% or more survive an infection.

So I think we are pretty far from the danger to  wipe out humanity with it.  Actually, the way we treat / or rather destroy / our environment is a much bigger real threat in this respect. But is is also slower, and hence easily to ignore for the moment.


Take care,
Martin


On 3/10/2020 12:12 AM, Arlene wrote:

Yes, this corna virus is scarey. If we are not careful. It can wipe out this whole world.

 

Sent from Mail for Windows 10

 

From: molly the blind tech lover
Sent: March 9, 2020 3:52 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Add-on Updater 20.03 #AddonRelease

 

This coronavirus is scary.

  

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: Monday, March 9, 2020 5:50 PM
To: nvda-addons@nvda-addons.groups.io
Subject: [nvda] Add-on Updater 20.03 #AddonRelease

 

Hello all,

 

First, as Coronavirus is gripping the world, please wash your hands, heed travel advisories, and check and double-check information floating around the internet.

 

Add-on Updater 20.03 is on its way – this important (and mandatory) add-on release will show up for all NVDA users within the next 24 hours. Changes include:

 

  • NVDA 2019.3 or later is required.
  • NVDA itself will check compatibility range, not the add-on.

 

As I announced a few weeks ago, with Add-on Updater 20.03, all my add-ons I’m currently maintaining have graduated to Python 3 – all my add-ons will now require NVDA 2019.3 or later. As such, once Add-on Updater 20.03 shows up, old Python 2 versions of my add-ons will be removed from community add-ons website.

Cheers,

Joseph

 

--
Martin Wiemer

Grabensprung 185
12683 Berlin
Germany

Tel.: +49 178 7156676


Re: Selecting Cells in Table

Quentin Christensen
 

Hi Bhavya,

Did this used to work?  I must admit I couldn't remember - I just tried in Word (365) and the current version of Firefox with both NVDA 2019.3.1 and 2019.2.1 and while I can navigate tables with control+alt+arrows, I can't add shift to select cells.  You could create an issue for this.

Quentin.

On Fri, Mar 6, 2020 at 5:08 PM Bhavya shah <bhavya.shah125@...> wrote:
Dear all,

The current scenario is that I am on a standard table on a webpage
displayed by Firefox. I am seeking to select multiple cells of a
specific column.
1 Shift+Ctrl+Alt+arrow keys don't produce any effect.
* Shift +Ctrl+arrow keys keep selecting the subsequent cell, i.e. the
next cell in the same row as opposed to the next cell in the column.
I would appreciate any methods or tricks to accomplish what I am trying to do.

Thanks.

--
Best Regards
Bhavya Shah

Blogger at Hiking Across Horizons: https://bhavyashah125.wordpress.com/
E-mail
Address: bhavya.shah125@...
LinkedIn: https://www.linkedin.com/in/bhavyashah125/





--
Quentin Christensen
Training and Support Manager


Re: NVDA ebooks: Is there one for Access?

Quentin Christensen
 

Hi Ollie,

We don't have one for Access I'm afraid.  I'm working on one for PowerPoint at this stage.  Once that's complete, I'm not sure what topic we'll tackle next, but of course if there is interest in Access, we wouldn't rule it out.  Anecdotally, I've only been asked about Access a few times in recent years so it's not something everyone uses as much as they used to.

If you've got specific things you are having trouble with in Access do let us know and I or someone can have a look into it of course.

Kind regards
Quentin.

On Fri, Mar 6, 2020 at 8:50 AM Mallard <mallard@...> wrote:
Hello all,


Years ago I bought an ebook to learn to use NVDA with Word.


Is there anything like it for Access?


If not, is there any other material to learn how to use Access with nVDA?


Many thanks in advance.

Ciao,

Ollie






--
Quentin Christensen
Training and Support Manager


Re: New Computer- problems with NVDA response

Jackie
 

The tool I provided does all that.

On 3/9/20, Tony Ballou <cyberpro224@...> wrote:
Hi,


Well now this explains plenty, sigh. This is one of the more notorious
AV products and unfortunately not in a good way. The only real way to
uninstall this is to delete the registry key associated with McAfee.
Things may have changed in recent years.   I've successfully done it,
but I don['t recommend that anyone mess around in the registry unless
they are totally sure of what they are doing.


Tony

On 3/9/2020 5:38 PM, Kevin Cussick via Groups.Io wrote:
Hi,   I use to go out to fix computers for RNIB,   my heart sinks when
I hear about this Av Product.   if You can get a a refund and get rid
it used to be hard to remove as well. good luck.

On 08/03/2020 23:48, Brian Vogel wrote:
On Sun, Mar 8, 2020 at 05:36 PM, Anna Givens wrote:

    I just bought the subscription for McAfee, so not wanting to take it
    off. Why would I need to?

And if they give you 30 days to turn it back in, my recommendation is
that you do.  Over the last several years there have been multiple,
and sometimes repeated for a given brand, issues with 3rd party
security suites and Windows 10. Windows Defender, as implemented
under Windows 8 and 10, lands in the top tier of security suites
consistently, and is more than just adequate protection.

--

Brian *-*Windows 10 Pro, 64-Bit, Version 1909, Build 18363

*Power is being told you're not loved and not being destroyed by it.*

        ~ Madonna




--
Subscribe to a WordPress for Newbies Mailing List by sending a message to:
wp4newbs-request@... with 'subscribe' in the Subject field OR by
visiting the list page at http://www.freelists.org/list/wp4newbs
& check out my sites at www.brighter-vision.com & www.mysitesbeenhacked.com


arkose labs captcha problems, revisited

Stephen
 

Hi there.
This time, when I go to:
https://www.arkoselabs.com/technology/#ArkoseEnforce
It says there is an audio challenge, but I can't find it anywhere with my old version of firefox.
Is anyone able to test out the web page on current hardware and software to see if the audio challenge can be reached and solved?
Thanks.


Re: NVDA Installation failed

Quentin Christensen
 

We've had a look into this one and it appears the German translators have translated the string for the shortcut key to start NVDA, which actually should not have been translated.  I will chase up with the translators so it can be fixed for 2020.1.

Regards

Quentin

On Fri, Mar 6, 2020 at 8:58 PM Felix G. <constantlyvariable@...> wrote:
Hi,
this one was gone for some time but it has a way of reappearing. If
I'm not mistaken, it's a string which got translated when it shouldn't
have been.
Best,
Felix

Am Fr., 6. März 2020 um 08:36 Uhr schrieb Sandra Pilz <sandra914481@...>:
>
> Hi Kostadin,
>
> Are you sure it's the same bug? If it was and if it has been there five years, installing NVDA 2019.1 shouldn't have worked either. But I was able to install that version successfully.
>
> Regards
>
>
>
>
> Regard
>
> Sandra
>
> Von meinem iPhone gesendet
>
> Am 06.03.2020 um 07:47 schrieb Kostadin Kolev <k.kolev1985@...>:
>
> 
>
> Hello Quentin,
>
> If I'm not mistaking, this is a known bug in NVDA. I've reported this almost 5 years ago and it still occurs. Here is the bug: NVDA installation may fail with an error if system UI language and language for non-unicode programs don't match · Issue #5166.
>
> ______
> Best wishes,
> Kostadin Kolev
>
> На 6.3.2020 г. в 1:19, Quentin Christensen написа:
>
> Hi Sandra,
>
> Thanks for following up, I appreciate the clarification.
>
> Setting my system language to German, I can replicate this.  We'll look into it.
>
> Quentin.
>
> On Thu, Mar 5, 2020 at 11:10 PM Sandra Pilz <sandra914481@...> wrote:
>>
>> Hi Quentin,
>>
>>
>> You wrote:
>>
>> When you originally went to install, did you get the UAC prompt from Windows itself about installing the program?  You get that for any program you install, but sometimes it pops up and doesn't get focus so you aren't alerted to it and even visually it's not obvious.  If you don't answer Yes to the UAC prompt within about 20 seconds, it times out and denies the program from installing.
>>
>>
>> Yes, I did see it, but the UAC prompt isn't the problem, I always answer Yes using the alt Y or in my case alt+j shortcut (German windows), and the installation continues. I don't wait for 20 seconds for something to happen.
>>
>>
>> The only other thing I was thinking was if you had controlled folder access set, it will install NVDA but not create the desktop shortcut.  If that was the issue though, it wouldn't have worked any better with NVDA 2019.1 than 2019.3.
>>
>> No, I don't have controlled folder access set. I checked this when it didn't work, because I knew it could be a problem. No, it's not active.
>>
>>
>> I do think there is a problem with the installation of 2019.3 though, because a lady on the German NVDA list reported the same problem. She's a very competent computer user and I'm sure she, too, knows how to deal with UAC. Maybe it doesn't affect systems where English is the default language... And maybe it wasn't reported much, because many people using NVDA 2019.3 will have updated an older version and won't have encountered this issue, because the shortcut and start menu entries had already been created by a previous installation of an older version of NVDA...
>>
>>
>> I, however, attempted a fresh install on a new machine.
>>
>>
>> Best
>>
>>
>> Sandra
>>
>>
>> Regards
>>
>> Quentin.
>>
>> On Thu, Mar 5, 2020 at 2:43 AM Sandra Pilz <sandra914481@...> wrote:
>>>
>>> Hi Felix,
>>>
>>>
>>> Thanks for your help. Unfortunately setting the NVDA language to English
>>> didn't help. The failed installation not only faild to create the
>>> desktop shortcut, but also didn't create NVDA entries in the start menu.
>>> I installed NVDA 2019.1 first and then updated to 2019.3.1, that did the
>>> trick.
>>>
>>>
>>> Best
>>>
>>>
>>> Sandra
>>>
>>> Am 04.03.2020 um 13:22 schrieb Felix G.:
>>> > Hello Sandra,
>>> > the installation failed because NVDA was unable to create its desktop
>>> > shortcut, for reasons I cannot begin to guess. I can think of two
>>> > options:
>>> > 1. Install without creating a desktop shortcut, then create one manually.
>>> > 2. Sometimes, switching the NVDA language to English before installing
>>> > fixes this problem. If you feel comfortable doing this, it may be the
>>> > cleaner option.
>>> > Hope this helps,
>>> > Felix
>>> >
>>> > Am Mi., 4. März 2020 um 14:11 Uhr schrieb Sandra Pilz <sandra914481@...>:
>>> >> Hello,
>>> >>
>>> >>
>>> >> I'm trying to install NVDA on a new machine running Windows 10 pro 1909.
>>> >>
>>> >>
>>> >> I'm running  the installation file as administrator. I'm getting the message that installing NVDA has failed.
>>> >>
>>> >>
>>> >> Please also see the log included below.
>>> >>
>>> >>
>>> >> Does anyone know what the problem might be and how to solve it??
>>> >>
>>> >>
>>> >> Thanks.
>>> >>
>>> >>
>>> >> Cheers
>>> >>
>>> >>
>>> >> Sandra
>>> >>
>>> >>
>>> >> INFO - __main__ (13:56:46.002) - MainThread (10924):
>>> >> Starting NVDA version 2019.3.1
>>> >> INFO - core.main (13:56:46.082) - MainThread (10924):
>>> >> Config dir: C:\Users\sandr\AppData\Roaming\nvda
>>> >> INFO - config.ConfigManager._loadConfig (13:56:46.082) - MainThread (10924):
>>> >> Loading config: C:\Users\sandr\AppData\Roaming\nvda\nvda.ini
>>> >> INFO - core.main (13:56:46.122) - MainThread (10924):
>>> >> Using Windows version 10.0.18363 workstation
>>> >> INFO - core.main (13:56:46.122) - MainThread (10924):
>>> >> Using Python version 3.7.5 (tags/v3.7.5:5c02a39a0b, Oct 14 2019, 23:09:19) [MSC v.1916 32 bit (Intel)]
>>> >> INFO - core.main (13:56:46.122) - MainThread (10924):
>>> >> Using comtypes version 1.1.7
>>> >> INFO - core.main (13:56:46.122) - MainThread (10924):
>>> >> Using configobj version 5.1.0 with validate version 1.0.1
>>> >> INFO - synthDriverHandler.setSynth (13:56:46.402) - MainThread (10924):
>>> >> Loaded synthDriver oneCore
>>> >> INFO - core.main (13:56:46.402) - MainThread (10924):
>>> >> Using wx version 4.0.3 msw (phoenix) wxWidgets 3.0.5 with six version 1.12.0
>>> >> INFO - brailleInput.initialize (13:56:46.407) - MainThread (10924):
>>> >> Braille input initialized
>>> >> INFO - braille.initialize (13:56:46.407) - MainThread (10924):
>>> >> Using liblouis version 3.10.0
>>> >> INFO - braille.initialize (13:56:46.407) - MainThread (10924):
>>> >> Using pySerial version 3.4
>>> >> INFO - braille.BrailleHandler.setDisplayByName (13:56:46.412) - MainThread (10924):
>>> >> Loaded braille display driver noBraille, current display has 0 cells.
>>> >> INFO - brailleDisplayDrivers.handyTech.BrailleDisplayDriver.__init__ (13:56:46.464) - braille._BgThread (11016):
>>> >> Found Easy Braille connected via hid (\\?\hid#vid_1fe4&pid_0044#7&7f9a61d&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030})
>>> >> INFO - braille.BrailleHandler.setDisplayByName (13:56:46.472) - braille._BgThread (11016):
>>> >> Loaded braille display driver handyTech, current display has 40 cells.
>>> >> INFO - core.main (13:56:46.582) - MainThread (10924):
>>> >> Java Access Bridge support initialized
>>> >> INFO - _UIAHandler.UIAHandler.MTAThreadFunc (13:56:46.582) - _UIAHandler.UIAHandler.MTAThread (11020):
>>> >> UIAutomation: IUIAutomation6
>>> >> INFO - core.main (13:56:46.762) - MainThread (10924):
>>> >> NVDA initialized
>>> >> ERROR - RPC process 8756 (nvda_slave.exe) (13:57:05.773) - Dummy-1 (10840):
>>> >> __main__.main:
>>> >> slave error
>>> >> Traceback (most recent call last):
>>> >>    File "nvda_slave.pyw", line 47, in main
>>> >>    File "installer.pyc", line 454, in install
>>> >>    File "installer.pyc", line 261, in registerInstallation
>>> >>    File "installer.pyc", line 58, in createShortcut
>>> >>    File "comtypes\client\lazybind.pyc", line 218, in __setattr__
>>> >>    File "comtypes\automation.pyc", line 729, in _invoke
>>> >> _ctypes.COMError: (-2147352567, 'Ausnahmefehler aufgetreten.', (None, None, None, 0, None))
>>> >> ERROR - gui.installerGui.doInstall (13:57:05.793) - MainThread (10924):
>>> >> Installation failed: 1
>>> >>
>>> >>
>>> >>
>>> >
>>> >
>>>
>>>
>>>
>>
>>
>> --
>> Quentin Christensen
>> Training and Support Manager
>>
>> NVDA 2019.3 rc2 now available for testing: https://www.nvaccess.org/post/nvda-2019-3rc2-now-available-for-testing/
>>
>> Web: www.nvaccess.org
>> Training: https://www.nvaccess.org/shop/
>> Certification: https://certification.nvaccess.org/
>> User group: https://nvda.groups.io/g/nvda
>> Facebook: http://www.facebook.com/NVAccess
>> Twitter: @NVAccess
>
>
>
> --
> Quentin Christensen
> Training and Support Manager
>
> NVDA 2019.3 rc2 now available for testing: https://www.nvaccess.org/post/nvda-2019-3rc2-now-available-for-testing/
>
> Web: www.nvaccess.org
> Training: https://www.nvaccess.org/shop/
> Certification: https://certification.nvaccess.org/
> User group: https://nvda.groups.io/g/nvda
> Facebook: http://www.facebook.com/NVAccess
> Twitter: @NVAccess
>
>





--
Quentin Christensen
Training and Support Manager


Re: Windows 10 App Essentials 20.03.1 emergency hotfix #addonrelease

 

Hi,

That’s why the emergency hotfix for the add-on suppresses only a few editing function announcements, not all of them. Thankfully, a key flag for these announcements differ from one another, so it is a matter of locating things to suppress… unless I don’t feel well for a while (health is of utmost priority).

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of enes saribas
Sent: Monday, March 9, 2020 4:09 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Windows 10 App Essentials 20.03.1 emergency hotfix #AddonRelease

 

Hello Joseph,

As reported in the relevent Github issue, these notifications aren't just word deleted, but announce cut, copy, paste among others. Isn't it detremental to suppress them all? I don't think  all would be harmful, and some would be useful.

On 3/9/2020 12:28 AM, Joseph Lee wrote:

Hi all,

 

Windows 10 App Essentials 20.03.1 is now available. This quick fix release resolves a reported issue where NVDA will say “delete back word” when you press Control+Backspace when using recent Word 365 releases.

Cheers,

Joseph


locked Re: Add-on Updater 20.03 #addonrelease

Arlene
 

Yes, this corna virus is scarey. If we are not careful. It can wipe out this whole world.

 

Sent from Mail for Windows 10

 

From: molly the blind tech lover
Sent: March 9, 2020 3:52 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Add-on Updater 20.03 #AddonRelease

 

This coronavirus is scary.

  

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: Monday, March 9, 2020 5:50 PM
To: nvda-addons@nvda-addons.groups.io
Subject: [nvda] Add-on Updater 20.03 #AddonRelease

 

Hello all,

 

First, as Coronavirus is gripping the world, please wash your hands, heed travel advisories, and check and double-check information floating around the internet.

 

Add-on Updater 20.03 is on its way – this important (and mandatory) add-on release will show up for all NVDA users within the next 24 hours. Changes include:

 

  • NVDA 2019.3 or later is required.
  • NVDA itself will check compatibility range, not the add-on.

 

As I announced a few weeks ago, with Add-on Updater 20.03, all my add-ons I’m currently maintaining have graduated to Python 3 – all my add-ons will now require NVDA 2019.3 or later. As such, once Add-on Updater 20.03 shows up, old Python 2 versions of my add-ons will be removed from community add-ons website.

Cheers,

Joseph

 


Re: Windows 10 App Essentials 20.03.1 emergency hotfix #addonrelease

enes sarıbaş
 

Hello Joseph,

As reported in the relevent Github issue, these notifications aren't just word deleted, but announce cut, copy, paste among others. Isn't it detremental to suppress them all? I don't think  all would be harmful, and some would be useful.

On 3/9/2020 12:28 AM, Joseph Lee wrote:

Hi all,

 

Windows 10 App Essentials 20.03.1 is now available. This quick fix release resolves a reported issue where NVDA will say “delete back word” when you press Control+Backspace when using recent Word 365 releases.

Cheers,

Joseph


locked Re: Add-on Updater 20.03 #addonrelease

Sarah k Alawami
 

Well, being that I'm not yet updated to 19.3, still using 19.2 as the person who made winwizard compatible didn't give us a link and we have to search his twitter for it, yeah, fun times. Hopefully soon I can update as yeah I want to keep using win wizard over here.

Sarah Alawami, owner of TFFP. . For more info go to our website.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on [twitch.](http://twitch.tv/ke7zum] Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page

Finally, to become a patron and help support the podcast go here

On 9 Mar 2020, at 15:25, Mallard wrote:

Hlelo Joseph,


Many thannks.


As of tonight, the whole of Italy is locked down.


Ciao,

Ollie




On 09/03/2020 22:50, Joseph Lee wrote:

Hello all,

First, as Coronavirus is gripping the world, please wash your hands, heed travel advisories, and check and double-check information floating around the internet.

Add-on Updater 20.03 is on its way – this important (and mandatory) add-on release will show up for all NVDA users within the next 24 hours. Changes include:

* NVDA 2019.3 or later is required.
* NVDA itself will check compatibility range, not the add-on.

As I announced a few weeks ago, with Add-on Updater 20.03, all my add-ons I’m currently maintaining have graduated to Python 3 – all my add-ons will now require NVDA 2019.3 or later. As such, once Add-on Updater 20.03 shows up, old Python 2 versions of my add-ons will be removed from community add-ons website.

Cheers,

Joseph


locked Re: Add-on Updater 20.03 #addonrelease

molly the blind tech lover
 

This coronavirus is scary.

  

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: Monday, March 9, 2020 5:50 PM
To: nvda-addons@nvda-addons.groups.io
Subject: [nvda] Add-on Updater 20.03 #AddonRelease

 

Hello all,

 

First, as Coronavirus is gripping the world, please wash your hands, heed travel advisories, and check and double-check information floating around the internet.

 

Add-on Updater 20.03 is on its way – this important (and mandatory) add-on release will show up for all NVDA users within the next 24 hours. Changes include:

 

  • NVDA 2019.3 or later is required.
  • NVDA itself will check compatibility range, not the add-on.

 

As I announced a few weeks ago, with Add-on Updater 20.03, all my add-ons I’m currently maintaining have graduated to Python 3 – all my add-ons will now require NVDA 2019.3 or later. As such, once Add-on Updater 20.03 shows up, old Python 2 versions of my add-ons will be removed from community add-ons website.

Cheers,

Joseph


Re: New Computer- problems with NVDA response

Tony Ballou
 

Hi,


Well now this explains plenty, sigh. This is one of the more notorious AV products and unfortunately not in a good way. The only real way to uninstall this is to delete the registry key associated with McAfee. Things may have changed in recent years.   I've successfully done it, but I don['t recommend that anyone mess around in the registry unless they are totally sure of what they are doing.


Tony

On 3/9/2020 5:38 PM, Kevin Cussick via Groups.Io wrote:
Hi,   I use to go out to fix computers for RNIB,   my heart sinks when I hear about this Av Product.   if You can get a a refund and get rid it used to be hard to remove as well. good luck.

On 08/03/2020 23:48, Brian Vogel wrote:
On Sun, Mar 8, 2020 at 05:36 PM, Anna Givens wrote:

    I just bought the subscription for McAfee, so not wanting to take it
    off. Why would I need to?

And if they give you 30 days to turn it back in, my recommendation is that you do.  Over the last several years there have been multiple, and sometimes repeated for a given brand, issues with 3rd party security suites and Windows 10. Windows Defender, as implemented under Windows 8 and 10, lands in the top tier of security suites consistently, and is more than just adequate protection.

--

Brian *-*Windows 10 Pro, 64-Bit, Version 1909, Build 18363

*Power is being told you're not loved and not being destroyed by it.*

        ~ Madonna


locked Re: Add-on Updater 20.03 #addonrelease

Mallard
 

Hlelo Joseph,


Many thannks.


As of tonight, the whole of Italy is locked down.


Ciao,

Ollie

On 09/03/2020 22:50, Joseph Lee wrote:

Hello all,

First, as Coronavirus is gripping the world, please wash your hands, heed travel advisories, and check and double-check information floating around the internet.

Add-on Updater 20.03 is on its way – this important (and mandatory) add-on release will show up for all NVDA users within the next 24 hours. Changes include:

* NVDA 2019.3 or later is required.
* NVDA itself will check compatibility range, not the add-on.

As I announced a few weeks ago, with Add-on Updater 20.03, all my add-ons I’m currently maintaining have graduated to Python 3 – all my add-ons will now require NVDA 2019.3 or later. As such, once Add-on Updater 20.03 shows up, old Python 2 versions of my add-ons will be removed from community add-ons website.

Cheers,

Joseph