Date   

Playing NVDA sound in a Microsoft Teams conference

Sylvie Duchateau
 

Hello,

I am trying to have NVDA speak in a Microsoft teams meeting.

I check the screen sharing setting, check the box to include audio.

But people do not hear nvda sound.

In tried different things in pressing ctrl+alt+S and choosing different sound sources.

But nothing helps.

Using another screen reader with the same sound settings works.

Do you have experienced this with teams? Have you any suggestions?

Thank you

Best

Sylvie


Re: NVDA goes silent when arrowing down the list of participants panel in Zoom

Bob Cavanaugh <cavbob1993@...>
 

I'll have to investigate that. I don't use Zoom with System Access all
that much, because most of the time I'm doing the recording, and
System Access does not find the record button when tabbing through.
I'm not sure what my friend uses when we talk on Zoom regularly, but I
know her cue to start talking is me finishing setting my timer,
meaning that System Access doesn't read the recording alert. I'll play
around with that when I attend a large meeting next.

On 11/29/20, Sky Mundell <skyt@shaw.ca> wrote:
Hello Bob. Just curious, does SA have that problem? System Access I mean?

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Bob
Cavanaugh
Sent: Sunday, November 29, 2020 6:09 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA goes silent when arrowing down the list of
participants panel in Zoom

I have this issue too. What I've found to work is to hit your up arrow when
you get to the point where it goes silent, then your down arrow again. That
helps for a brief time, then you have to repeat that process again. I agree,
kind of annoying. I'm also having two additional issues with NVDA not
reading things properly in Zoom:
1. When typing anything in Zoom and you type something wrong, NVDA does not
read what you backspace. It reads if you type things normally, but if you
try to review or correct an error, it will not read.
2. If you're in a meeting that initially isn't being recorded, then the host
starts recording, NVDA does not read the alert that tells you that the
meeting is now being recorded.

On 11/29/20, Sim Kah Yong <simkahyong@gmail.com> wrote:
Hi all,

Wish to report the above problem when using NVDA in Zoom. IN a zoom
meeting, if I wish to find out the list of participants, I will press
alt + U to call out the participants panel. I will then arrow down the
list. After severl down arrow, NVDA will stop speaking.

I am using the latest version of NVDA, Zoom enhancement app and Zoom.
This problem has been there even with the older version of NVDA and
Zoom. I am using Windows 8.1. I have tried the following with no avail:

1. Wit no apps

2. restart NVDA

3. Re-boot my computer.

Just wish to find out if any of you have similar problem and what can
be done? Perhaps this can help to improve future version of NVDA.

I have also use JAWS and this has not been a problem. Thanks all.
















NVDA and terminal

Afik Souffir <afik.souffir@...>
 



Hi,
As part of my work, i need to connect via terminal, at Strauss Group.

When loading the Terminal from my laptop, NVDA is not speak and nothing shows in Braille.

What do i have to do for this to work?

Thanks for any help
Afik Souffir


Re: Excel 365

Quentin Christensen
 

NVDA+control+c should normally save NVDA's configuration.  It's NVDA+shift+c you want to set column headers (and NVDA+shift+r to set row headers).

If it's copying text, it sounds like it's just registering control+c. Double check that your NVDA key works, and if using the numpad insert, make sure numlock is off etc.

Quentin.

On Sat, Nov 28, 2020 at 5:42 PM Robert Doc Wright godfearer <godfearer@...> wrote:
when I press nvda+ctrl+c it announces 'copy link'
 
Shouldn't I be able to use cell A1 to set both column and row headers?
*********
family Times weekly Movie times
 

go to Doc's Stream
http://stream.wrighthere.net:8000/stream.mp3
Ask Miss A to play family times on tuneIn
You can also find family times on OoTunes.
 
 

walking in VictoryI welcome all that are interested in joining our devotionals on Monday thru saturdays at 8am EST. join the devotion channel.
Also, there is a weekly bible study at 8pm EST in the Walking with Jesus channel.
 

Add the following information in your TeamTalk
host address: wiv.wrighthere.net
TCP/UDP ports: 10333
 
entry name: walking in Victory
tab twice and press space on Add/update
 



--
Quentin Christensen
Training and Support Manager


Re: NVDA goes silent when arrowing down the list of participants panel in Zoom

Gene
 

What happens if you down arrow and when speech stops, read the current line. You can also try reading the current line of the navigator object, in the desktop layout, numpad 8. I don't know the laptop layout. You may not hear anything but if this combination allows you to hear the names as you move, that may be a work around that is reasonable for now.

Gene

-----Original Message-----
From: Sky Mundell
Sent: Sunday, November 29, 2020 8:20 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA goes silent when arrowing down the list of participants panel in Zoom

Hello Bob. Just curious, does SA have that problem? System Access I mean?

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Bob Cavanaugh
Sent: Sunday, November 29, 2020 6:09 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA goes silent when arrowing down the list of participants panel in Zoom

I have this issue too. What I've found to work is to hit your up arrow when you get to the point where it goes silent, then your down arrow again. That helps for a brief time, then you have to repeat that process again. I agree, kind of annoying. I'm also having two additional issues with NVDA not reading things properly in Zoom:
1. When typing anything in Zoom and you type something wrong, NVDA does not read what you backspace. It reads if you type things normally, but if you try to review or correct an error, it will not read.
2. If you're in a meeting that initially isn't being recorded, then the host starts recording, NVDA does not read the alert that tells you that the meeting is now being recorded.

On 11/29/20, Sim Kah Yong <simkahyong@gmail.com> wrote:
Hi all,

Wish to report the above problem when using NVDA in Zoom. IN a zoom
meeting, if I wish to find out the list of participants, I will press
alt + U to call out the participants panel. I will then arrow down the
list. After severl down arrow, NVDA will stop speaking.

I am using the latest version of NVDA, Zoom enhancement app and Zoom.
This problem has been there even with the older version of NVDA and
Zoom. I am using Windows 8.1. I have tried the following with no avail:

1. Wit no apps

2. restart NVDA

3. Re-boot my computer.

Just wish to find out if any of you have similar problem and what can
be done? Perhaps this can help to improve future version of NVDA.

I have also use JAWS and this has not been a problem. Thanks all.







Re: NVDA goes silent when arrowing down the list of participants panel in Zoom

Sim Kah Yong
 

Hi, the different alerts not picking up by NVDA also Occurs with JAWS.

One solution to hear chat alerts is to open up the chat panel with Alt + H. Thanks.

On 11/30/2020 10:17 AM, Sim Kah Yong via groups.io wrote:
Hi,

Thanks for adding that into the problem of using NVDA with Zoom. I encountered those  too.

To add on, NVDA will stop to read out any alert after a while, alerts can be from chat, participants joining, leaving, or muting or unmuting. Thanks.


On 11/30/2020 10:09 AM, Bob Cavanaugh wrote:
I have this issue too. What I've found to work is to hit your up arrow
when you get to the point where it goes silent, then your down arrow
again. That helps for a brief time, then you have to repeat that
process again. I agree, kind of annoying. I'm also having two
additional issues with NVDA not reading things properly in Zoom:
1. When typing anything in Zoom and you type something wrong, NVDA
does not read what you backspace. It reads if you type things
normally, but if you try to review or correct an error, it will not
read.
2. If you're in a meeting that initially isn't being recorded, then
the host starts recording, NVDA does not read the alert that tells you
that the meeting is now being recorded.

On 11/29/20, Sim Kah Yong <simkahyong@gmail.com> wrote:
Hi all,

Wish to report the above problem when using NVDA in Zoom. IN a zoom
meeting, if I wish to find out the list of participants, I will press
alt + U to call out the participants panel. I will then arrow down the
list. After severl down arrow, NVDA will stop speaking.

I am using the latest version of NVDA, Zoom enhancement app and Zoom.
This problem has been there even with the older version of NVDA and
Zoom. I am using Windows 8.1. I have tried the following with no avail:

1.  Wit no apps

2.  restart NVDA

3.  Re-boot my computer.

Just wish to find out if any of you have similar problem and what can be
done? Perhaps this can help to improve future version of NVDA.

I have also use JAWS and this has not been a problem. Thanks all.











Re: NVDA goes silent when arrowing down the list of participants panel in Zoom

Sky Mundell
 

Hello Bob. Just curious, does SA have that problem? System Access I mean?

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Bob Cavanaugh
Sent: Sunday, November 29, 2020 6:09 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA goes silent when arrowing down the list of participants panel in Zoom

I have this issue too. What I've found to work is to hit your up arrow when you get to the point where it goes silent, then your down arrow again. That helps for a brief time, then you have to repeat that process again. I agree, kind of annoying. I'm also having two additional issues with NVDA not reading things properly in Zoom:
1. When typing anything in Zoom and you type something wrong, NVDA does not read what you backspace. It reads if you type things normally, but if you try to review or correct an error, it will not read.
2. If you're in a meeting that initially isn't being recorded, then the host starts recording, NVDA does not read the alert that tells you that the meeting is now being recorded.

On 11/29/20, Sim Kah Yong <simkahyong@gmail.com> wrote:
Hi all,

Wish to report the above problem when using NVDA in Zoom. IN a zoom
meeting, if I wish to find out the list of participants, I will press
alt + U to call out the participants panel. I will then arrow down the
list. After severl down arrow, NVDA will stop speaking.

I am using the latest version of NVDA, Zoom enhancement app and Zoom.
This problem has been there even with the older version of NVDA and
Zoom. I am using Windows 8.1. I have tried the following with no avail:

1. Wit no apps

2. restart NVDA

3. Re-boot my computer.

Just wish to find out if any of you have similar problem and what can
be done? Perhaps this can help to improve future version of NVDA.

I have also use JAWS and this has not been a problem. Thanks all.







Re: NVDA goes silent when arrowing down the list of participants panel in Zoom

Sim Kah Yong
 

Hi,

Thanks for adding that into the problem of using NVDA with Zoom. I encountered those  too.

To add on, NVDA will stop to read out any alert after a while, alerts can be from chat, participants joining, leaving, or muting or unmuting. Thanks.

On 11/30/2020 10:09 AM, Bob Cavanaugh wrote:
I have this issue too. What I've found to work is to hit your up arrow
when you get to the point where it goes silent, then your down arrow
again. That helps for a brief time, then you have to repeat that
process again. I agree, kind of annoying. I'm also having two
additional issues with NVDA not reading things properly in Zoom:
1. When typing anything in Zoom and you type something wrong, NVDA
does not read what you backspace. It reads if you type things
normally, but if you try to review or correct an error, it will not
read.
2. If you're in a meeting that initially isn't being recorded, then
the host starts recording, NVDA does not read the alert that tells you
that the meeting is now being recorded.

On 11/29/20, Sim Kah Yong <simkahyong@gmail.com> wrote:
Hi all,

Wish to report the above problem when using NVDA in Zoom. IN a zoom
meeting, if I wish to find out the list of participants, I will press
alt + U to call out the participants panel. I will then arrow down the
list. After severl down arrow, NVDA will stop speaking.

I am using the latest version of NVDA, Zoom enhancement app and Zoom.
This problem has been there even with the older version of NVDA and
Zoom. I am using Windows 8.1. I have tried the following with no avail:

1. Wit no apps

2. restart NVDA

3. Re-boot my computer.

Just wish to find out if any of you have similar problem and what can be
done? Perhaps this can help to improve future version of NVDA.

I have also use JAWS and this has not been a problem. Thanks all.








Re: NVDA goes silent when arrowing down the list of participants panel in Zoom

Bob Cavanaugh <cavbob1993@...>
 

I have this issue too. What I've found to work is to hit your up arrow
when you get to the point where it goes silent, then your down arrow
again. That helps for a brief time, then you have to repeat that
process again. I agree, kind of annoying. I'm also having two
additional issues with NVDA not reading things properly in Zoom:
1. When typing anything in Zoom and you type something wrong, NVDA
does not read what you backspace. It reads if you type things
normally, but if you try to review or correct an error, it will not
read.
2. If you're in a meeting that initially isn't being recorded, then
the host starts recording, NVDA does not read the alert that tells you
that the meeting is now being recorded.

On 11/29/20, Sim Kah Yong <simkahyong@gmail.com> wrote:
Hi all,

Wish to report the above problem when using NVDA in Zoom. IN a zoom
meeting, if I wish to find out the list of participants, I will press
alt + U to call out the participants panel. I will then arrow down the
list. After severl down arrow, NVDA will stop speaking.

I am using the latest version of NVDA, Zoom enhancement app and Zoom.
This problem has been there even with the older version of NVDA and
Zoom. I am using Windows 8.1. I have tried the following with no avail:

1. Wit no apps

2. restart NVDA

3. Re-boot my computer.

Just wish to find out if any of you have similar problem and what can be
done? Perhaps this can help to improve future version of NVDA.

I have also use JAWS and this has not been a problem. Thanks all.







Re: NVDA goes silent when arrowing down the list of participants panel in Zoom

Sim Kah Yong
 

Hi Gene

Thanks for your suggestions. I have forgotten to mention that I have also tried maximising the window to no help.  Does anyone else have any ideas? Thanks.

On 11/30/2020 6:59 AM, Gene wrote:
I don't know if this will help but did you try alt enter and then maximizing the window in the menu?  also, and I don't think this will help but you never know, have you tried pressing the full screen button?

Gene
-----Original Message----- From: Sim Kah Yong
Sent: Sunday, November 29, 2020 4:41 PM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA goes silent when arrowing down the list of participants panel in Zoom

Hi all,

Wish to report the above problem when using NVDA in Zoom. IN a zoom
meeting, if I wish to find out the list of participants, I will press
alt + U to call out the participants panel. I will then arrow down the
list. After severl down arrow, NVDA will stop speaking.

I am using the latest version of NVDA, Zoom enhancement app and Zoom.
This problem has been there even with the older version of NVDA and
Zoom. I am using Windows 8.1. I have tried the following with no avail:

1.  Wit no apps

2.  restart NVDA

3.  Re-boot my computer.

Just wish to find out if any of you have similar problem and what can be
done? Perhaps this can help to improve future version of NVDA.

I have also use JAWS and this has not been a problem. Thanks all.









Re: Input gestures dialogue section in user guide

Quentin Christensen
 

What did you have in mind?  Most sections don't have detailed examples.  I could expand on it in the Basic Training for NVDA module - currently it just gets a brief mention in the advanced section.


On Sat, Nov 28, 2020 at 5:14 PM Khalid Anwar <anwarkhalid850@...> wrote:
 I feel that the input gestures section in the user guide is not very helpful, I think there are a couple of lines in section 12 about the dialogue but not many examples of how to actually use it,  and exactly what it can be used for.
 Perhaps a video tutorial or audio podcast might be better served to explain this. 



--
Quentin Christensen
Training and Support Manager


Re: NVDA goes silent when arrowing down the list of participants panel in Zoom

Gene
 

I don't know if this will help but did you try alt enter and then maximizing the window in the menu? also, and I don't think this will help but you never know, have you tried pressing the full screen button?

Gene

-----Original Message-----
From: Sim Kah Yong
Sent: Sunday, November 29, 2020 4:41 PM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA goes silent when arrowing down the list of participants panel in Zoom

Hi all,

Wish to report the above problem when using NVDA in Zoom. IN a zoom
meeting, if I wish to find out the list of participants, I will press
alt + U to call out the participants panel. I will then arrow down the
list. After severl down arrow, NVDA will stop speaking.

I am using the latest version of NVDA, Zoom enhancement app and Zoom.
This problem has been there even with the older version of NVDA and
Zoom. I am using Windows 8.1. I have tried the following with no avail:

1. Wit no apps

2. restart NVDA

3. Re-boot my computer.

Just wish to find out if any of you have similar problem and what can be
done? Perhaps this can help to improve future version of NVDA.

I have also use JAWS and this has not been a problem. Thanks all.


NVDA goes silent when arrowing down the list of participants panel in Zoom

Sim Kah Yong
 

Hi all,

Wish to report the above problem when using NVDA in Zoom. IN a zoom meeting, if I wish to find out the list of participants, I will press alt + U to call out the participants panel. I will then arrow down the list. After severl down arrow, NVDA will stop speaking.

I am using the latest version of NVDA, Zoom enhancement app and Zoom. This problem has been there even with the older version of NVDA and Zoom. I am using Windows 8.1. I have tried the following with no avail:

1.  Wit no apps

2.  restart NVDA

3.  Re-boot my computer.

Just wish to find out if any of you have similar problem and what can be done? Perhaps this can help to improve future version of NVDA.

I have also use JAWS and this has not been a problem. Thanks all.


Re: Reading with NVDA on a Web Browser

Gene
 

You are using a JAWS command that is not available in NVDA. The commands you want to use have never been available. Ivf you want to use the keys in this way, an add-on has recently become available that will let you do this but you will not be able to review the screen or use object navigation if you have it set to emulate the read to end command in JAWS and more or less the numpad keys in JAWS.

If you just use NVDA and try to use all the JAWS commands, some will work and some will not.

You can get the add-on here:
https://addons.nvda-project.org/addons/numpadNavMode.en.html

There is nothing wrong with using the add-on, but if you don't know the basics of using NVDA screen review commands, you may have inconveniences when wanting to hear dialogs or move through them efficiently or at other times when you are working somewhere where there isn't a cursor.

Gene

-----Original Message-----
From: Dave Grossoehme
Sent: Sunday, November 29, 2020 11:30 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Reading with NVDA on a Web Browser



Thanks for the quick response. That's fine unless you are reading a long article on the web. I've changed to all the different reviews and nothing changes. I just found out the NVDA even say's bottom when pressing it in an email.

Dave




On 11/29/2020 10:05 AM, Sarah k Alawami wrote:


Why not just use the arrow keys to read by line? No need in my humble opinion to use the nvda ones. I never ever use them unless "m in screen or document review which for me is only when I have to be.

--

Sarah Alawami, owner of TFFP. . For more info go to our website.

Check out my adventures with a shadow machine.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on twitch. Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page You will also be able to buy some of my products and eBooks there.

Finally, to become a patron and help support the podcast go here

On 29 Nov 2020, at 8:59, Dave Grossoehme wrote:



Good Morning: I am using NVDA 20.3. I have tried to read with Firefox and Micro Soft Edge on a web page. When reading by line by pressing the down arrow on the four pack on a desk top computer, I can read the information. However, when pressing the NVDA key + the down arrow to read all NVDA reads the line only. However, when pressing the NVDA key bottom is spoken. I have never seen this action before. It doesn't make any difference what web page you are on. I thought it was how the page was set up, so, I went to the AFB.org page and this happened there as well. This is on Win 2004 version of windows. I am using Windows Essentials add on with NVDA. This started with Fire Fox with no add ons for NVDA. This is a fresh install of Windows.

Dave


Re: compatible gmail notifier with nvda

tim
 

Well one did and it was google desktop.
It did what he wants and even let you read them. The down fall was memory hog and was constantly indexing.
Google killed it because to easy to get access to there email servers.

On 11/28/2020 6:03 PM, Brian Vogel wrote:
It is not typical for any e-mail client, or webmail client, to provide notifications unless it is running or you are logged in.
The PC (or Mac, for that matter) behave differently, by design, than a smartphone.  You either need to have an email client running or be logged in to your Gmail (or Yahoo, or Outlook.com, or whatever webmail client) in a browser before notifications on new message arrival will be provided.
I guess it's possible that someone may have written an e-mail notifier that stays logged in to a given email account rather than expecting it to be open in the background like it typically is, but if one exists, I don't know about it.
--
Brian -Windows 10 Pro, 64-Bit, Version 20H2, Build 19042
*/If you think that you can think about a thing, inextricably attached to something else, without thinking of the thing it is attached to, then you have a legal mind./*
        ~ Thomas Reed Powell


Re: Reading with NVDA on a Web Browser

 

Hi,

Because in laptop layout, NVDA+down arrow (regular down arrow key) reads next line under review cursor. To perform say all in laptop layout, press NVDA+A.

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Dave Grossoehme
Sent: Sunday, November 29, 2020 10:08 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Reading with NVDA on a Web Browser

 

Good Day:  Thanks Joseph for the quick response.  The keyboard setting was set to laptop.  The skim reading was also turned off.  As far as the down key, it was the down key on the four pack or the down key on the arrow keys.  The question I have is why did the numpad incert key say bottom?

Dave

 

On 11/29/2020 10:54 AM, Joseph Lee wrote:

Hi,

Can you check:

  1. What is the keyboard layout set to (NVDA menu/Preferences/Settings/Keyboard)?
  2. Which down arrow key are you pressing to start say all? Don’t use Numpad down arrow (Numpad 2) for this purpose.

 

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Dave Grossoehme
Sent: Sunday, November 29, 2020 9:31 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Reading with NVDA on a Web Browser

 

Thanks for the quick response.  That's fine unless you are reading a long article on the web.  I've changed to all the different reviews and nothing changes.  I just found out the NVDA even say's bottom when pressing it in an email.

Dave

 

On 11/29/2020 10:05 AM, Sarah k Alawami wrote:

Why not just use the arrow keys to read by line? No need in my humble opinion to use the nvda ones. I never ever use them unless "m in screen or document review which for me is only when I have to be.

--

Sarah Alawami, owner of TFFP. . For more info go to our website.

Check out my adventures with a shadow machine.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on twitch. Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page You will also be able to buy some of my products and eBooks there.

Finally, to become a patron and help support the podcast go here

On 29 Nov 2020, at 8:59, Dave Grossoehme wrote:

Good Morning:  I am using NVDA 20.3.  I have tried to read with Firefox and Micro Soft Edge on a web page.  When reading by line by pressing the down arrow on the four pack on a desk top computer, I can read the information.  However, when pressing the NVDA key + the down arrow to read all NVDA reads the line only. However, when pressing the NVDA key bottom is spoken.  I have never seen this action before.  It doesn't make any difference what web page you are on.  I thought it was how the page was set up, so, I went to the AFB.org page and this happened there as well.  This is on Win 2004 version of windows.  I am using Windows Essentials add on with NVDA.  This started with Fire Fox with no add ons for NVDA.  This is a fresh install of Windows.

Dave


Re: Reading with NVDA on a Web Browser

Dave Grossoehme
 

Good Day:  Thanks Joseph for the quick response.  The keyboard setting was set to laptop.  The skim reading was also turned off.  As far as the down key, it was the down key on the four pack or the down key on the arrow keys.  The question I have is why did the numpad incert key say bottom?

Dave


On 11/29/2020 10:54 AM, Joseph Lee wrote:

Hi,

Can you check:

  1. What is the keyboard layout set to (NVDA menu/Preferences/Settings/Keyboard)?
  2. Which down arrow key are you pressing to start say all? Don’t use Numpad down arrow (Numpad 2) for this purpose.

 

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Dave Grossoehme
Sent: Sunday, November 29, 2020 9:31 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Reading with NVDA on a Web Browser

 

Thanks for the quick response.  That's fine unless you are reading a long article on the web.  I've changed to all the different reviews and nothing changes.  I just found out the NVDA even say's bottom when pressing it in an email.

Dave

 

On 11/29/2020 10:05 AM, Sarah k Alawami wrote:

Why not just use the arrow keys to read by line? No need in my humble opinion to use the nvda ones. I never ever use them unless "m in screen or document review which for me is only when I have to be.

--

Sarah Alawami, owner of TFFP. . For more info go to our website.

Check out my adventures with a shadow machine.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on twitch. Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page You will also be able to buy some of my products and eBooks there.

Finally, to become a patron and help support the podcast go here

On 29 Nov 2020, at 8:59, Dave Grossoehme wrote:

Good Morning:  I am using NVDA 20.3.  I have tried to read with Firefox and Micro Soft Edge on a web page.  When reading by line by pressing the down arrow on the four pack on a desk top computer, I can read the information.  However, when pressing the NVDA key + the down arrow to read all NVDA reads the line only. However, when pressing the NVDA key bottom is spoken.  I have never seen this action before.  It doesn't make any difference what web page you are on.  I thought it was how the page was set up, so, I went to the AFB.org page and this happened there as well.  This is on Win 2004 version of windows.  I am using Windows Essentials add on with NVDA.  This started with Fire Fox with no add ons for NVDA.  This is a fresh install of Windows.

Dave


Re: Reading with NVDA on a Web Browser

 

Hi,

Can you check:

  1. What is the keyboard layout set to (NVDA menu/Preferences/Settings/Keyboard)?
  2. Which down arrow key are you pressing to start say all? Don’t use Numpad down arrow (Numpad 2) for this purpose.

 

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Dave Grossoehme
Sent: Sunday, November 29, 2020 9:31 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Reading with NVDA on a Web Browser

 

Thanks for the quick response.  That's fine unless you are reading a long article on the web.  I've changed to all the different reviews and nothing changes.  I just found out the NVDA even say's bottom when pressing it in an email.

Dave

 

On 11/29/2020 10:05 AM, Sarah k Alawami wrote:

Why not just use the arrow keys to read by line? No need in my humble opinion to use the nvda ones. I never ever use them unless "m in screen or document review which for me is only when I have to be.

--

Sarah Alawami, owner of TFFP. . For more info go to our website.

Check out my adventures with a shadow machine.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on twitch. Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page You will also be able to buy some of my products and eBooks there.

Finally, to become a patron and help support the podcast go here

On 29 Nov 2020, at 8:59, Dave Grossoehme wrote:

Good Morning:  I am using NVDA 20.3.  I have tried to read with Firefox and Micro Soft Edge on a web page.  When reading by line by pressing the down arrow on the four pack on a desk top computer, I can read the information.  However, when pressing the NVDA key + the down arrow to read all NVDA reads the line only. However, when pressing the NVDA key bottom is spoken.  I have never seen this action before.  It doesn't make any difference what web page you are on.  I thought it was how the page was set up, so, I went to the AFB.org page and this happened there as well.  This is on Win 2004 version of windows.  I am using Windows Essentials add on with NVDA.  This started with Fire Fox with no add ons for NVDA.  This is a fresh install of Windows.

Dave


Re: Reading with NVDA on a Web Browser

Dave Grossoehme
 

Thanks for the quick response.  That's fine unless you are reading a long article on the web.  I've changed to all the different reviews and nothing changes.  I just found out the NVDA even say's bottom when pressing it in an email.

Dave


On 11/29/2020 10:05 AM, Sarah k Alawami wrote:

Why not just use the arrow keys to read by line? No need in my humble opinion to use the nvda ones. I never ever use them unless "m in screen or document review which for me is only when I have to be.

--

Sarah Alawami, owner of TFFP. . For more info go to our website.

Check out my adventures with a shadow machine.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on twitch. Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page You will also be able to buy some of my products and eBooks there.

Finally, to become a patron and help support the podcast go here

On 29 Nov 2020, at 8:59, Dave Grossoehme wrote:

Good Morning:  I am using NVDA 20.3.  I have tried to read with Firefox and Micro Soft Edge on a web page.  When reading by line by pressing the down arrow on the four pack on a desk top computer, I can read the information.  However, when pressing the NVDA key + the down arrow to read all NVDA reads the line only. However, when pressing the NVDA key bottom is spoken.  I have never seen this action before.  It doesn't make any difference what web page you are on.  I thought it was how the page was set up, so, I went to the AFB.org page and this happened there as well.  This is on Win 2004 version of windows.  I am using Windows Essentials add on with NVDA.  This started with Fire Fox with no add ons for NVDA.  This is a fresh install of Windows.

Dave


Re: Reading with NVDA on a Web Browser

Sarah k Alawami
 

Why not just use the arrow keys to read by line? No need in my humble opinion to use the nvda ones. I never ever use them unless "m in screen or document review which for me is only when I have to be.

--

Sarah Alawami, owner of TFFP. . For more info go to our website.

Check out my adventures with a shadow machine.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on twitch. Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page You will also be able to buy some of my products and eBooks there.

Finally, to become a patron and help support the podcast go here

On 29 Nov 2020, at 8:59, Dave Grossoehme wrote:

Good Morning:  I am using NVDA 20.3.  I have tried to read with Firefox and Micro Soft Edge on a web page.  When reading by line by pressing the down arrow on the four pack on a desk top computer, I can read the information.  However, when pressing the NVDA key + the down arrow to read all NVDA reads the line only. However, when pressing the NVDA key bottom is spoken.  I have never seen this action before.  It doesn't make any difference what web page you are on.  I thought it was how the page was set up, so, I went to the AFB.org page and this happened there as well.  This is on Win 2004 version of windows.  I am using Windows Essentials add on with NVDA.  This started with Fire Fox with no add ons for NVDA.  This is a fresh install of Windows.

Dave

8381 - 8400 of 87612