Date   

Re: about balabolka and nvda.

Robert Mendoza
 

In addition, to ensure you copied the correct text or number you can press the nvda plus C. And, nvda will report if your copied text is done correctly before pasting it to text editor. hope this helps.

Robert Mendoza

On 3/21/2016 11:13 AM, Gene New Zealand wrote:
Hi Moti

The way I usually read them is with the review text command in NVDA

On the numeric keypad, I will use the number one for previous character, the number 2 for current character and the number 3 for next character or in your case numbers. I am using a desktop pc and have the numeric keypad so this can be done.

Depending what it is in as well you might even be able to do it with the left and right arrow keys.

I think also some of the paid synths will do it, but i find the review text commands do the trick for me plus i can copy them if needed.

Gene nz



On 21-Mar-16 8:20 AM, nasrin khaksar wrote:
i tried it and when i peisted my document the part which i selected my
selections were not peisted.

On 3/20/16, nasrin khaksar <nasrinkhaksar3@gmail.com> wrote:
hi geen and ron.
your suggestion for using f9 and f10 is great and i have been forgotten it.
thanks extremely for your help and god bless you.

On 3/20/16, Gene New Zealand <hurrikennyandopo@outlook.co.nz> wrote:
Hi

Is it the whole document you want to copy? If so once it is in balabulka
and showing, if you just want to copy the text, and you want the whole
document, use the ctrl key + the letter A. This will select the whole
document. You can then use the ctrl key + the letter C to copy it to
another document. Then it is a matter of pasing it in the new document
with the CTRL key and the letter V

NVDA was reading what was copied into bulkbuka and i could use the CTRL
keys + the left or right arrow key to go word by word and also the say
all command.

As you mentioned I could not hear NVDA say when I was selecting text
using the shift key. I am not sure if it is because I am on windows 10
doing it.

If you only want certain parts out of it, you could use the F9 key to
start a mark oto mark where you want NVDA to copy from then go to the
end of the area where you want nVDA to stop the mark which is at the end
of the stuff you want. The NVDA key + the letter C will speak what is in
the clipboard, once the F10 key has copied it there.

You can also use the text review or is it the review text commands. They
are the ones on the numeric keypad.

The section in the user manual is 5.5. Reviewing Text
That section will give you all the keys you can use. This part of the
manual is useful fo rread only stuff where it can not be copied the
normal way.

hope this helps.

Gene nz


On 21-Mar-16 1:54 AM, nasrin khaksar wrote:
my problem is with selection and for this reason i dont know which
line or word i am selecting, shurely i cant copy peist my desires.

On 3/20/16, nasrin khaksar <nasrinkhaksar3@gmail.com> wrote:
hi.
thanks for your answer.
i have problem with selection.
in text editor like notepad, akelpad, wordpad i can press shift with
down arrow key and nvda say selection.
when i press control shift right i can select word and nvda reads my
selection.
but unfortunately in balabolka does not say any of my selections and i
cant understand what do i do.

On 3/20/16, Ron Canazzi <aa2vm@roadrunner.com> wrote:
Hi Group,

I have just opened a PDF file in Balabolka and I have had no problems
with reading, navigation or copy/paste.

I have used it in the past to convert lengthy text files and other
formats such as PDF, EPub and HTML to synthesized speech using the
Microsoft default voice of choice. I have the new legal Eloquence
SAPI
5 version which does a great job of interacting with the software. On
older slower computers: XP and early Windows 7, I did have a problem
with the program crashing when I tried converting lengthy text and
other
format files to speech. On my newer Windows 8.1 8 core with 16 GB
RAM,
I have no such issues.

Just what types of problems are you people having with the interface?

On 3/20/2016 5:46 AM, Kostadin Kolev wrote:
Hello,

Working with text from within Balabolka is not screen reader
friendly.
At least not when using NVDA.
But you can open a file (e.g. PDF) in Balabolka, select the whole
text
content with Control+A and copy it to the clipboard with Control+C.
Note however, that NVDA will not report that you have selected any
text. Then you can paste the copied text in some accessible text
editor like Notepad, AkelPad, Notepad++, etc. and work with it from
there.
Alternatively, after opening the file in Balabolka, you can save it
to
plain text file (*.txt) from menu File -> Save as in Balabolka and
choose "Text File" from the "Save as type" combo box in the "Save as"
dialog. Then you can opened the saved plain text (*.txt) file in any
accessible plain text editor (Notepad, AkelPad, Notepad++, etc.) and
work with it from there.
Note however, that Balabolka's text extraction methods don't preserve
some formating information, including the page breaks and the pages
get merged in one large file with in some cases no distinction
between
pages. In most cases however, there is at least one blank line
between
pages, so you'll be able to distinct them from one another.
Even with all those suggestions for workarounds however, I strongly
suggest you to firstly try to open the PDF files in Acrobat Reader DC
and work with the text from within it, before trying any other PDF
viewer like Balabolka. Acrobat Reader DC is free and can be
downloaded
from Adobe's website. You can copy text from PDF files from Acrobat
Reader DC, unless the PDF file in question is protected in a way that
prevents text copying to work at all. But in such a case, I doubt
that
you be able to extract/copy text from such a PDF file even with
another PDF viewer like Balabolka for example.

______
Best wishes,
Kostadin Kolev

На 20.3.2016 г. в 10:52, nasrin khaksar написа:
hi every one.
i realy appreciate you if someone help me to learn how to use
balabolka, select words lines pages and copy and peist my selection.
i need working with pdf documents and now the only solution for me
is
balabolka.
because sumatra is not accessible until now.
thanks so much and god bless you.

On 3/19/16, Brian's Mail list account <bglists@blueyonder.co.uk>
wrote:
I've had little luck with this software either, so don't think its
just
you.

I suspect there is probably a distinct version which we have to
use,
but I
do not know which it is and where to get it!
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "nasrin khaksar" <nasrinkhaksar3@gmail.com>
To: <nvda@groups.io>
Sent: Saturday, March 19, 2016 4:02 AM
Subject: [nvda] about balabolka and nvda.


hi every one.
i use balabolka and tried many versions of it.
but unfortunately i cant use it by nvda easily.
for example: when i want to select one character, one word, one
line
and press shift left and right, shift control left and right,
shift
up
and shift down nvda does not announce anything and i cant
understand
what do i am doing.
who can teach me to solve this problem?
thanks for your help and god bless you.

--
Those who follow the Messenger-Prophet, the Ummi, whom they find
written down with them in the Taurat and the Injeel [who] enjoins
them
good and forbids them evil, and makes lawful to them the good
things
and makes unlawful to them impure things, and removes from them
their
burden and the shackles which were upon them; so [as for] those
who
believe in him and honor him and help him, and follow the light
which
has been sent down with him, these it is that are the successful.
holy quran, chapter 7, verse 157.
best website for studying islamic book in different languages
al-islam.org





--
Those who follow the Messenger-Prophet, the Ummi, whom they find
written down with them in the Taurat and the Injeel [who] enjoins them
good and forbids them evil, and makes lawful to them the good things
and makes unlawful to them impure things, and removes from them their
burden and the shackles which were upon them; so [as for] those who
believe in him and honor him and help him, and follow the light which
has been sent down with him, these it is that are the successful.
holy quran, chapter 7, verse 157.
best website for studying islamic book in different languages
al-islam.org
--
Check out my website for nvda tutorials and other blindness related
material
at http://www.accessibilitycentral.net




--
Those who follow the Messenger-Prophet, the Ummi, whom they find
written down with them in the Taurat and the Injeel [who] enjoins them
good and forbids them evil, and makes lawful to them the good things
and makes unlawful to them impure things, and removes from them their
burden and the shackles which were upon them; so [as for] those who
believe in him and honor him and help him, and follow the light which
has been sent down with him, these it is that are the successful.
holy quran, chapter 7, verse 157.
best website for studying islamic book in different languages
al-islam.org




Re: about balabolka and nvda.

Gene NZ <hurrikennyandopo@...>
 

Hi Moti

The way I usually read them is with the review text command in NVDA

On the numeric keypad, I will use the number one for previous character, the number 2 for current character and the number 3 for next character or in your case numbers. I am using a desktop pc and have the numeric keypad so this can be done.

Depending what it is in as well you might even be able to do it with the left and right arrow keys.

I think also some of the paid synths will do it, but i find the review text commands do the trick for me plus i can copy them if needed.

Gene nz

On 21-Mar-16 8:20 AM, nasrin khaksar wrote:
i tried it and when i peisted my document the part which i selected my
selections were not peisted.

On 3/20/16, nasrin khaksar <nasrinkhaksar3@gmail.com> wrote:
hi geen and ron.
your suggestion for using f9 and f10 is great and i have been forgotten it.
thanks extremely for your help and god bless you.

On 3/20/16, Gene New Zealand <hurrikennyandopo@outlook.co.nz> wrote:
Hi

Is it the whole document you want to copy? If so once it is in balabulka
and showing, if you just want to copy the text, and you want the whole
document, use the ctrl key + the letter A. This will select the whole
document. You can then use the ctrl key + the letter C to copy it to
another document. Then it is a matter of pasing it in the new document
with the CTRL key and the letter V

NVDA was reading what was copied into bulkbuka and i could use the CTRL
keys + the left or right arrow key to go word by word and also the say
all command.

As you mentioned I could not hear NVDA say when I was selecting text
using the shift key. I am not sure if it is because I am on windows 10
doing it.

If you only want certain parts out of it, you could use the F9 key to
start a mark oto mark where you want NVDA to copy from then go to the
end of the area where you want nVDA to stop the mark which is at the end
of the stuff you want. The NVDA key + the letter C will speak what is in
the clipboard, once the F10 key has copied it there.

You can also use the text review or is it the review text commands. They
are the ones on the numeric keypad.

The section in the user manual is 5.5. Reviewing Text
That section will give you all the keys you can use. This part of the
manual is useful fo rread only stuff where it can not be copied the
normal way.

hope this helps.

Gene nz


On 21-Mar-16 1:54 AM, nasrin khaksar wrote:
my problem is with selection and for this reason i dont know which
line or word i am selecting, shurely i cant copy peist my desires.

On 3/20/16, nasrin khaksar <nasrinkhaksar3@gmail.com> wrote:
hi.
thanks for your answer.
i have problem with selection.
in text editor like notepad, akelpad, wordpad i can press shift with
down arrow key and nvda say selection.
when i press control shift right i can select word and nvda reads my
selection.
but unfortunately in balabolka does not say any of my selections and i
cant understand what do i do.

On 3/20/16, Ron Canazzi <aa2vm@roadrunner.com> wrote:
Hi Group,

I have just opened a PDF file in Balabolka and I have had no problems
with reading, navigation or copy/paste.

I have used it in the past to convert lengthy text files and other
formats such as PDF, EPub and HTML to synthesized speech using the
Microsoft default voice of choice. I have the new legal Eloquence
SAPI
5 version which does a great job of interacting with the software. On
older slower computers: XP and early Windows 7, I did have a problem
with the program crashing when I tried converting lengthy text and
other
format files to speech. On my newer Windows 8.1 8 core with 16 GB
RAM,
I have no such issues.

Just what types of problems are you people having with the interface?

On 3/20/2016 5:46 AM, Kostadin Kolev wrote:
Hello,

Working with text from within Balabolka is not screen reader
friendly.
At least not when using NVDA.
But you can open a file (e.g. PDF) in Balabolka, select the whole
text
content with Control+A and copy it to the clipboard with Control+C.
Note however, that NVDA will not report that you have selected any
text. Then you can paste the copied text in some accessible text
editor like Notepad, AkelPad, Notepad++, etc. and work with it from
there.
Alternatively, after opening the file in Balabolka, you can save it
to
plain text file (*.txt) from menu File -> Save as in Balabolka and
choose "Text File" from the "Save as type" combo box in the "Save as"
dialog. Then you can opened the saved plain text (*.txt) file in any
accessible plain text editor (Notepad, AkelPad, Notepad++, etc.) and
work with it from there.
Note however, that Balabolka's text extraction methods don't preserve
some formating information, including the page breaks and the pages
get merged in one large file with in some cases no distinction
between
pages. In most cases however, there is at least one blank line
between
pages, so you'll be able to distinct them from one another.
Even with all those suggestions for workarounds however, I strongly
suggest you to firstly try to open the PDF files in Acrobat Reader DC
and work with the text from within it, before trying any other PDF
viewer like Balabolka. Acrobat Reader DC is free and can be
downloaded
from Adobe's website. You can copy text from PDF files from Acrobat
Reader DC, unless the PDF file in question is protected in a way that
prevents text copying to work at all. But in such a case, I doubt
that
you be able to extract/copy text from such a PDF file even with
another PDF viewer like Balabolka for example.

______
Best wishes,
Kostadin Kolev

На 20.3.2016 г. в 10:52, nasrin khaksar написа:
hi every one.
i realy appreciate you if someone help me to learn how to use
balabolka, select words lines pages and copy and peist my selection.
i need working with pdf documents and now the only solution for me
is
balabolka.
because sumatra is not accessible until now.
thanks so much and god bless you.

On 3/19/16, Brian's Mail list account <bglists@blueyonder.co.uk>
wrote:
I've had little luck with this software either, so don't think its
just
you.

I suspect there is probably a distinct version which we have to
use,
but I
do not know which it is and where to get it!
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "nasrin khaksar" <nasrinkhaksar3@gmail.com>
To: <nvda@groups.io>
Sent: Saturday, March 19, 2016 4:02 AM
Subject: [nvda] about balabolka and nvda.


hi every one.
i use balabolka and tried many versions of it.
but unfortunately i cant use it by nvda easily.
for example: when i want to select one character, one word, one
line
and press shift left and right, shift control left and right,
shift
up
and shift down nvda does not announce anything and i cant
understand
what do i am doing.
who can teach me to solve this problem?
thanks for your help and god bless you.

--
Those who follow the Messenger-Prophet, the Ummi, whom they find
written down with them in the Taurat and the Injeel [who] enjoins
them
good and forbids them evil, and makes lawful to them the good
things
and makes unlawful to them impure things, and removes from them
their
burden and the shackles which were upon them; so [as for] those
who
believe in him and honor him and help him, and follow the light
which
has been sent down with him, these it is that are the successful.
holy quran, chapter 7, verse 157.
best website for studying islamic book in different languages
al-islam.org





--
Those who follow the Messenger-Prophet, the Ummi, whom they find
written down with them in the Taurat and the Injeel [who] enjoins them
good and forbids them evil, and makes lawful to them the good things
and makes unlawful to them impure things, and removes from them their
burden and the shackles which were upon them; so [as for] those who
believe in him and honor him and help him, and follow the light which
has been sent down with him, these it is that are the successful.
holy quran, chapter 7, verse 157.
best website for studying islamic book in different languages
al-islam.org
--
Check out my website for nvda tutorials and other blindness related
material
at http://www.accessibilitycentral.net




--
Those who follow the Messenger-Prophet, the Ummi, whom they find
written down with them in the Taurat and the Injeel [who] enjoins them
good and forbids them evil, and makes lawful to them the good things
and makes unlawful to them impure things, and removes from them their
burden and the shackles which were upon them; so [as for] those who
believe in him and honor him and help him, and follow the light which
has been sent down with him, these it is that are the successful.
holy quran, chapter 7, verse 157.
best website for studying islamic book in different languages
al-islam.org



--
Check out my website for nvda tutorials and other blindness related material at http://www.accessibilitycentral.net


Spellcheck in MS Word 2016 does not work

 

Hello,
I have noticed that the spellcheck in ms word 2016 does not tell me the name of the word it is trying to fix. It also does not tell me the sentance it goes in.
Does anyone know how I can get it to work again?
Thank you,


Re: Embedded objects and applications to writing in Google Chrome

Gene
 

I can't tell what or how you want something checked.  this list probably doesn't accept attachments, if you are trying to send one.  Your message has no explanation of what you want tested or how. 
 
Gene

----- Original Message -----
From: Marco Oros
Sent: Sunday, March 20, 2016 5:26 PM
Subject: Re: [nvda] Embedded objects and applications to writing in Google Chrome

OK, I've send this thing to check, with this embedded objects.



Re: Embedded objects and applications to writing in Google Chrome

Marco Oros
 

OK, I've send this thing to check, with this embedded objects.


Re: Embedded objects and applications to writing in Google Chrome

Gene
 

I'm not sure what you are saying.  Chrome is supposed to update itself. 
 
Gene

----- Original Message -----
From: Marco Oros
Sent: Sunday, March 20, 2016 4:34 PM
Subject: Re: [nvda] Embedded objects and applications to writing in Google Chrome

And also, maybe It doesn't work, because I didn't update a Google chrome
or no?



Re: confused about all of the screen reader voices out there

Chris Shook <chris0309@...>
 

I have Vocalizer for JAWS and I've looked at the vocalizer from CodeFactory. There doesn't sem to be any difference.
However, the Elequence voice for CodeFactory is choppy and not as clear. If your going to buy the CodeFactory for the Vocalizer voices, go for it, but if your going to buy it for elequence, might be best to stick with the Sapi product.
Hope this helps.
Chris


Re: Embedded objects and applications to writing in Google Chrome

Marco Oros
 

OK!
It will be better to send one page with embedded objects.
Ofcourse, due to the Firefox and NVDA problems with embedded objects, It doesn't work and I can't press those objects in Google chrome, only in Internet explorer.
http://metalsounds.fr/en/zenko/108-zenko-9-notes-harmony-support-ring-bag-sticks.html


Re: Embedded objects and applications to writing in Google Chrome

Kevin Chao
 

How can I observe this issue you describe? Where do I go and what do I press?

On Sun, Mar 20, 2016 at 2:34 PM Marco Oros <marco.oros93@...> wrote:
And also, maybe It doesn't work, because I didn't update a Google chrome
or no?




Re: Embedded objects and applications to writing in Google Chrome

Marco Oros
 

And also, maybe It doesn't work, because I didn't update a Google chrome or no?


Re: Touchscreens?

William Brandes
 

hi. i have three windows 8.1 tablets.

a dell venu pro, hp stream 7" and winbook 7" (which has a full-size usb port)

first, i would install the classic shell start menu emulator.

second, if needed, get a dongle to use a full-size usb keyboard.

third, use a bluetooth keyboard if you wish; i do for portability.

but, will need the full size keyboard to enable the bluetooth.

in my humble opinion, just forget touch with the windows tablet and
nvda. the screenreader works great with keyboard and that is fine with
me.

i am writing this email with my winbook 7 with full-size usb keyboard.

just sayin' ... william


Re: Touchscreens?

valiant8086
 

Hi.

With mouse coordinate tones turned on, do you have mouse noises when you move your finger around the screen?? Some devices use a touch pad device on the touch screen and have a driver that makes it somewhat function like a touch screen but it isn't but a pointing device, so accessibility layer for touch doesn't necessarily work well.

Try Narrator, hold in its windows key and press volume up. Have narrator closed before you do else only one screen reader can have access to accessibility. This could also explain your trouble with NVDA would you be having narrator running when you start NVDA somehow? If so NVDA can't have access to the accessibility layer.




Cheers, Aaron Spears, general Partner - Valiant Galaxy Associates Developing "very good audiogames" for the blind community http://valiantGalaxy.com Sent with Thunderbird 38.5.0 portable

On 3/20/2016 11:56 AM, rob wrote:
Hi folks

Today, I received a linx 8, windows tablet. Running windows 8.1, after getting set up with some sighted assistance to install NVDA. and before anyone says it, reading the user guide, I find myself completely lost and baffled as to how one goes about using a touchscreen with nvda.

All of the gestures mentioned in the guide, such as, two finger double tap to open the nvda menu, three finger tap to change touch modes, flicking from left to right, up/down. double tapping, fail to register. I get some information when putting my finger on a random part of the screen, or sliding around, but nothing worth mentioning.

Am I missing something, or is it just very buggy?
also, I'm using nvda 16.1

Regards

Rob


Re: about balabolka and nvda.

 

i tried it and when i peisted my document the part which i selected my
selections were not peisted.

On 3/20/16, nasrin khaksar <nasrinkhaksar3@gmail.com> wrote:
hi geen and ron.
your suggestion for using f9 and f10 is great and i have been forgotten it.
thanks extremely for your help and god bless you.

On 3/20/16, Gene New Zealand <hurrikennyandopo@outlook.co.nz> wrote:
Hi

Is it the whole document you want to copy? If so once it is in balabulka
and showing, if you just want to copy the text, and you want the whole
document, use the ctrl key + the letter A. This will select the whole
document. You can then use the ctrl key + the letter C to copy it to
another document. Then it is a matter of pasing it in the new document
with the CTRL key and the letter V

NVDA was reading what was copied into bulkbuka and i could use the CTRL
keys + the left or right arrow key to go word by word and also the say
all command.

As you mentioned I could not hear NVDA say when I was selecting text
using the shift key. I am not sure if it is because I am on windows 10
doing it.

If you only want certain parts out of it, you could use the F9 key to
start a mark oto mark where you want NVDA to copy from then go to the
end of the area where you want nVDA to stop the mark which is at the end
of the stuff you want. The NVDA key + the letter C will speak what is in
the clipboard, once the F10 key has copied it there.

You can also use the text review or is it the review text commands. They
are the ones on the numeric keypad.

The section in the user manual is 5.5. Reviewing Text
That section will give you all the keys you can use. This part of the
manual is useful fo rread only stuff where it can not be copied the
normal way.

hope this helps.

Gene nz


On 21-Mar-16 1:54 AM, nasrin khaksar wrote:
my problem is with selection and for this reason i dont know which
line or word i am selecting, shurely i cant copy peist my desires.

On 3/20/16, nasrin khaksar <nasrinkhaksar3@gmail.com> wrote:
hi.
thanks for your answer.
i have problem with selection.
in text editor like notepad, akelpad, wordpad i can press shift with
down arrow key and nvda say selection.
when i press control shift right i can select word and nvda reads my
selection.
but unfortunately in balabolka does not say any of my selections and i
cant understand what do i do.

On 3/20/16, Ron Canazzi <aa2vm@roadrunner.com> wrote:
Hi Group,

I have just opened a PDF file in Balabolka and I have had no problems
with reading, navigation or copy/paste.

I have used it in the past to convert lengthy text files and other
formats such as PDF, EPub and HTML to synthesized speech using the
Microsoft default voice of choice. I have the new legal Eloquence
SAPI
5 version which does a great job of interacting with the software. On
older slower computers: XP and early Windows 7, I did have a problem
with the program crashing when I tried converting lengthy text and
other
format files to speech. On my newer Windows 8.1 8 core with 16 GB
RAM,
I have no such issues.

Just what types of problems are you people having with the interface?

On 3/20/2016 5:46 AM, Kostadin Kolev wrote:
Hello,

Working with text from within Balabolka is not screen reader
friendly.
At least not when using NVDA.
But you can open a file (e.g. PDF) in Balabolka, select the whole
text
content with Control+A and copy it to the clipboard with Control+C.
Note however, that NVDA will not report that you have selected any
text. Then you can paste the copied text in some accessible text
editor like Notepad, AkelPad, Notepad++, etc. and work with it from
there.
Alternatively, after opening the file in Balabolka, you can save it
to
plain text file (*.txt) from menu File -> Save as in Balabolka and
choose "Text File" from the "Save as type" combo box in the "Save as"
dialog. Then you can opened the saved plain text (*.txt) file in any
accessible plain text editor (Notepad, AkelPad, Notepad++, etc.) and
work with it from there.
Note however, that Balabolka's text extraction methods don't preserve
some formating information, including the page breaks and the pages
get merged in one large file with in some cases no distinction
between
pages. In most cases however, there is at least one blank line
between
pages, so you'll be able to distinct them from one another.
Even with all those suggestions for workarounds however, I strongly
suggest you to firstly try to open the PDF files in Acrobat Reader DC
and work with the text from within it, before trying any other PDF
viewer like Balabolka. Acrobat Reader DC is free and can be
downloaded
from Adobe's website. You can copy text from PDF files from Acrobat
Reader DC, unless the PDF file in question is protected in a way that
prevents text copying to work at all. But in such a case, I doubt
that
you be able to extract/copy text from such a PDF file even with
another PDF viewer like Balabolka for example.

______
Best wishes,
Kostadin Kolev

На 20.3.2016 г. в 10:52, nasrin khaksar написа:
hi every one.
i realy appreciate you if someone help me to learn how to use
balabolka, select words lines pages and copy and peist my selection.
i need working with pdf documents and now the only solution for me
is
balabolka.
because sumatra is not accessible until now.
thanks so much and god bless you.

On 3/19/16, Brian's Mail list account <bglists@blueyonder.co.uk>
wrote:
I've had little luck with this software either, so don't think its
just
you.

I suspect there is probably a distinct version which we have to
use,
but I
do not know which it is and where to get it!
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "nasrin khaksar" <nasrinkhaksar3@gmail.com>
To: <nvda@groups.io>
Sent: Saturday, March 19, 2016 4:02 AM
Subject: [nvda] about balabolka and nvda.


hi every one.
i use balabolka and tried many versions of it.
but unfortunately i cant use it by nvda easily.
for example: when i want to select one character, one word, one
line
and press shift left and right, shift control left and right,
shift
up
and shift down nvda does not announce anything and i cant
understand
what do i am doing.
who can teach me to solve this problem?
thanks for your help and god bless you.

--
Those who follow the Messenger-Prophet, the Ummi, whom they find
written down with them in the Taurat and the Injeel [who] enjoins
them
good and forbids them evil, and makes lawful to them the good
things
and makes unlawful to them impure things, and removes from them
their
burden and the shackles which were upon them; so [as for] those
who
believe in him and honor him and help him, and follow the light
which
has been sent down with him, these it is that are the successful.
holy quran, chapter 7, verse 157.
best website for studying islamic book in different languages
al-islam.org








--
Those who follow the Messenger-Prophet, the Ummi, whom they find
written down with them in the Taurat and the Injeel [who] enjoins them
good and forbids them evil, and makes lawful to them the good things
and makes unlawful to them impure things, and removes from them their
burden and the shackles which were upon them; so [as for] those who
believe in him and honor him and help him, and follow the light which
has been sent down with him, these it is that are the successful.
holy quran, chapter 7, verse 157.
best website for studying islamic book in different languages
al-islam.org
--
Check out my website for nvda tutorials and other blindness related
material
at http://www.accessibilitycentral.net





--
Those who follow the Messenger-Prophet, the Ummi, whom they find
written down with them in the Taurat and the Injeel [who] enjoins them
good and forbids them evil, and makes lawful to them the good things
and makes unlawful to them impure things, and removes from them their
burden and the shackles which were upon them; so [as for] those who
believe in him and honor him and help him, and follow the light which
has been sent down with him, these it is that are the successful.
holy quran, chapter 7, verse 157.
best website for studying islamic book in different languages
al-islam.org



--
Those who follow the Messenger-Prophet, the Ummi, whom they find
written down with them in the Taurat and the Injeel [who] enjoins them
good and forbids them evil, and makes lawful to them the good things
and makes unlawful to them impure things, and removes from them their
burden and the shackles which were upon them; so [as for] those who
believe in him and honor him and help him, and follow the light which
has been sent down with him, these it is that are the successful.
holy quran, chapter 7, verse 157.
best website for studying islamic book in different languages
al-islam.org


Re: about balabolka and nvda.

 

hi geen and ron.
your suggestion for using f9 and f10 is great and i have been forgotten it.
thanks extremely for your help and god bless you.

On 3/20/16, Gene New Zealand <hurrikennyandopo@outlook.co.nz> wrote:
Hi

Is it the whole document you want to copy? If so once it is in balabulka
and showing, if you just want to copy the text, and you want the whole
document, use the ctrl key + the letter A. This will select the whole
document. You can then use the ctrl key + the letter C to copy it to
another document. Then it is a matter of pasing it in the new document
with the CTRL key and the letter V

NVDA was reading what was copied into bulkbuka and i could use the CTRL
keys + the left or right arrow key to go word by word and also the say
all command.

As you mentioned I could not hear NVDA say when I was selecting text
using the shift key. I am not sure if it is because I am on windows 10
doing it.

If you only want certain parts out of it, you could use the F9 key to
start a mark oto mark where you want NVDA to copy from then go to the
end of the area where you want nVDA to stop the mark which is at the end
of the stuff you want. The NVDA key + the letter C will speak what is in
the clipboard, once the F10 key has copied it there.

You can also use the text review or is it the review text commands. They
are the ones on the numeric keypad.

The section in the user manual is 5.5. Reviewing Text
That section will give you all the keys you can use. This part of the
manual is useful fo rread only stuff where it can not be copied the
normal way.

hope this helps.

Gene nz


On 21-Mar-16 1:54 AM, nasrin khaksar wrote:
my problem is with selection and for this reason i dont know which
line or word i am selecting, shurely i cant copy peist my desires.

On 3/20/16, nasrin khaksar <nasrinkhaksar3@gmail.com> wrote:
hi.
thanks for your answer.
i have problem with selection.
in text editor like notepad, akelpad, wordpad i can press shift with
down arrow key and nvda say selection.
when i press control shift right i can select word and nvda reads my
selection.
but unfortunately in balabolka does not say any of my selections and i
cant understand what do i do.

On 3/20/16, Ron Canazzi <aa2vm@roadrunner.com> wrote:
Hi Group,

I have just opened a PDF file in Balabolka and I have had no problems
with reading, navigation or copy/paste.

I have used it in the past to convert lengthy text files and other
formats such as PDF, EPub and HTML to synthesized speech using the
Microsoft default voice of choice. I have the new legal Eloquence SAPI
5 version which does a great job of interacting with the software. On
older slower computers: XP and early Windows 7, I did have a problem
with the program crashing when I tried converting lengthy text and
other
format files to speech. On my newer Windows 8.1 8 core with 16 GB RAM,
I have no such issues.

Just what types of problems are you people having with the interface?

On 3/20/2016 5:46 AM, Kostadin Kolev wrote:
Hello,

Working with text from within Balabolka is not screen reader friendly.
At least not when using NVDA.
But you can open a file (e.g. PDF) in Balabolka, select the whole text
content with Control+A and copy it to the clipboard with Control+C.
Note however, that NVDA will not report that you have selected any
text. Then you can paste the copied text in some accessible text
editor like Notepad, AkelPad, Notepad++, etc. and work with it from
there.
Alternatively, after opening the file in Balabolka, you can save it to
plain text file (*.txt) from menu File -> Save as in Balabolka and
choose "Text File" from the "Save as type" combo box in the "Save as"
dialog. Then you can opened the saved plain text (*.txt) file in any
accessible plain text editor (Notepad, AkelPad, Notepad++, etc.) and
work with it from there.
Note however, that Balabolka's text extraction methods don't preserve
some formating information, including the page breaks and the pages
get merged in one large file with in some cases no distinction between
pages. In most cases however, there is at least one blank line between
pages, so you'll be able to distinct them from one another.
Even with all those suggestions for workarounds however, I strongly
suggest you to firstly try to open the PDF files in Acrobat Reader DC
and work with the text from within it, before trying any other PDF
viewer like Balabolka. Acrobat Reader DC is free and can be downloaded
from Adobe's website. You can copy text from PDF files from Acrobat
Reader DC, unless the PDF file in question is protected in a way that
prevents text copying to work at all. But in such a case, I doubt that
you be able to extract/copy text from such a PDF file even with
another PDF viewer like Balabolka for example.

______
Best wishes,
Kostadin Kolev

На 20.3.2016 г. в 10:52, nasrin khaksar написа:
hi every one.
i realy appreciate you if someone help me to learn how to use
balabolka, select words lines pages and copy and peist my selection.
i need working with pdf documents and now the only solution for me is
balabolka.
because sumatra is not accessible until now.
thanks so much and god bless you.

On 3/19/16, Brian's Mail list account <bglists@blueyonder.co.uk>
wrote:
I've had little luck with this software either, so don't think its
just
you.

I suspect there is probably a distinct version which we have to use,
but I
do not know which it is and where to get it!
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "nasrin khaksar" <nasrinkhaksar3@gmail.com>
To: <nvda@groups.io>
Sent: Saturday, March 19, 2016 4:02 AM
Subject: [nvda] about balabolka and nvda.


hi every one.
i use balabolka and tried many versions of it.
but unfortunately i cant use it by nvda easily.
for example: when i want to select one character, one word, one
line
and press shift left and right, shift control left and right, shift
up
and shift down nvda does not announce anything and i cant
understand
what do i am doing.
who can teach me to solve this problem?
thanks for your help and god bless you.

--
Those who follow the Messenger-Prophet, the Ummi, whom they find
written down with them in the Taurat and the Injeel [who] enjoins
them
good and forbids them evil, and makes lawful to them the good
things
and makes unlawful to them impure things, and removes from them
their
burden and the shackles which were upon them; so [as for] those who
believe in him and honor him and help him, and follow the light
which
has been sent down with him, these it is that are the successful.
holy quran, chapter 7, verse 157.
best website for studying islamic book in different languages
al-islam.org








--
Those who follow the Messenger-Prophet, the Ummi, whom they find
written down with them in the Taurat and the Injeel [who] enjoins them
good and forbids them evil, and makes lawful to them the good things
and makes unlawful to them impure things, and removes from them their
burden and the shackles which were upon them; so [as for] those who
believe in him and honor him and help him, and follow the light which
has been sent down with him, these it is that are the successful.
holy quran, chapter 7, verse 157.
best website for studying islamic book in different languages
al-islam.org
--
Check out my website for nvda tutorials and other blindness related material
at http://www.accessibilitycentral.net




--
Those who follow the Messenger-Prophet, the Ummi, whom they find
written down with them in the Taurat and the Injeel [who] enjoins them
good and forbids them evil, and makes lawful to them the good things
and makes unlawful to them impure things, and removes from them their
burden and the shackles which were upon them; so [as for] those who
believe in him and honor him and help him, and follow the light which
has been sent down with him, these it is that are the successful.
holy quran, chapter 7, verse 157.
best website for studying islamic book in different languages
al-islam.org


Re: is there any option with NVDA to READ SINGLE DIGITS AND NOT A GROOUP OF DIGITS

Gene NZ <hurrikennyandopo@...>
 

Hi Moti

The way I usually read them is with the review text command in NVDA

On the numeric keypad, I will use the number one for previous character, the number 2 for current character and the number 3 for next character or in your case numbers. I am using a desktop pc and have the numeric keypad so this can be done.

Depending what it is in as well you might even be able to do it with the left and right arrow keys.

I think also some of the paid synths will do it, but i find the review text commands do the trick for me plus i can copy them if needed.

Gene nz


On 21-Mar-16 7:04 AM, Moty Azrad wrote:
Dear all,
 
The subject line explains well my question and if yes, how can I do it and which changes must be done to enable this feature?
 
Moti
 



Moti Azrad Musician & Piano tuner
motiaz@...
azrad_moty@...
motia@...
https://www.facebook.com/moti.azrad
ISRAEL   

-- 
Check out my website for nvda tutorials and other blindness related material at http://www.accessibilitycentral.net


Re: is there any option with NVDA to READ SINGLE DIGITS AND NOT A GROOUP OF DIGITS

Tyler Spivey
 

Please learn regular expressions.
Add a new dictionary entry.
match: (\d)
replace: \1
(note there's a trailing space at the end)
type: Regular expression

On 3/20/2016 11:04 AM, Moty Azrad wrote:
Dear all,

The subject line explains well my question and if yes, how can I do it
and which changes must be done to enable this feature?

Moti




Moti Azrad Musician & Piano tuner
motiaz@gmail.com
azrad_moty@hotmail.com
motia@013.net
https://www.facebook.com/moti.azrad
ISRAEL


Goldwave tutorials

Bhavya shah
 

Dear all,
As holidays are going on, I was thinking about something to learn that
is productive.
Audio editing and Goldwave had been in the back of my mind since long,
and now that some folks from my country has requested me to create an
NVDA tutorial on add-ons in Hindi, I finally want to ask you all for
Goldwave help.
I have Goldwave version 5.5.5 here, with the latest stable version of
the Goldwave NVDA add-on on an NVDA 2016.1 copy here.
I have absolutely no clue what to do next, and some documentation
reading here and there seems to be not of much help.
Thus, I would like to ask if there are any audio tutorials or
practical demonstrations on working with Goldwave using NVDA, basic
stuff like cutting, mixing, a little bit of audio effects, so that I
have a grasp of how audio editing with a screen reader works, and I
can possibly learn the advanced bits from elsewhere myself. It would
be sincerely appreciated if if you could point me towards resources
related resources that can help me learn NVDA with Goldwave, or if
someone is willing to just go through a little bit via Skype (my Id is
bhavya.09) or something, that would be wonderful too.
I would appreciate any assistance.
Thanks.

--
Warm Regards
Bhavya Shah
Using NVDA (Non Visual Desktop Access) free and open source screen
reader for Microsoft Windows
To download a copy of the free screen reader NVDA, please visit
http://www.nvaccess.org/
Using Google Talkback on Motorolla G second generation Lollipop 5.0.2
Reach me through the following means:
Mobile: +91 7506221750
E-mail id: bhavya.shah125@gmail.com
Skype id : bhavya.09


Re: about balabolka and nvda.

Gene NZ <hurrikennyandopo@...>
 

Hi

Is it the whole document you want to copy? If so once it is in balabulka and showing, if you just want to copy the text, and you want the whole document, use the ctrl key + the letter A. This will select the whole document. You can then use the ctrl key + the letter C to copy it to another document. Then it is a matter of pasing it in the new document with the CTRL key and the letter V

NVDA was reading what was copied into bulkbuka and i could use the CTRL keys + the left or right arrow key to go word by word and also the say all command.

As you mentioned I could not hear NVDA say when I was selecting text using the shift key. I am not sure if it is because I am on windows 10 doing it.

If you only want certain parts out of it, you could use the F9 key to start a mark oto mark where you want NVDA to copy from then go to the end of the area where you want nVDA to stop the mark which is at the end of the stuff you want. The NVDA key + the letter C will speak what is in the clipboard, once the F10 key has copied it there.

You can also use the text review or is it the review text commands. They are the ones on the numeric keypad.

The section in the user manual is 5.5. Reviewing Text
That section will give you all the keys you can use. This part of the manual is useful fo rread only stuff where it can not be copied the normal way.

hope this helps.

Gene nz

On 21-Mar-16 1:54 AM, nasrin khaksar wrote:
my problem is with selection and for this reason i dont know which
line or word i am selecting, shurely i cant copy peist my desires.

On 3/20/16, nasrin khaksar <nasrinkhaksar3@gmail.com> wrote:
hi.
thanks for your answer.
i have problem with selection.
in text editor like notepad, akelpad, wordpad i can press shift with
down arrow key and nvda say selection.
when i press control shift right i can select word and nvda reads my
selection.
but unfortunately in balabolka does not say any of my selections and i
cant understand what do i do.

On 3/20/16, Ron Canazzi <aa2vm@roadrunner.com> wrote:
Hi Group,

I have just opened a PDF file in Balabolka and I have had no problems
with reading, navigation or copy/paste.

I have used it in the past to convert lengthy text files and other
formats such as PDF, EPub and HTML to synthesized speech using the
Microsoft default voice of choice. I have the new legal Eloquence SAPI
5 version which does a great job of interacting with the software. On
older slower computers: XP and early Windows 7, I did have a problem
with the program crashing when I tried converting lengthy text and other
format files to speech. On my newer Windows 8.1 8 core with 16 GB RAM,
I have no such issues.

Just what types of problems are you people having with the interface?

On 3/20/2016 5:46 AM, Kostadin Kolev wrote:
Hello,

Working with text from within Balabolka is not screen reader friendly.
At least not when using NVDA.
But you can open a file (e.g. PDF) in Balabolka, select the whole text
content with Control+A and copy it to the clipboard with Control+C.
Note however, that NVDA will not report that you have selected any
text. Then you can paste the copied text in some accessible text
editor like Notepad, AkelPad, Notepad++, etc. and work with it from
there.
Alternatively, after opening the file in Balabolka, you can save it to
plain text file (*.txt) from menu File -> Save as in Balabolka and
choose "Text File" from the "Save as type" combo box in the "Save as"
dialog. Then you can opened the saved plain text (*.txt) file in any
accessible plain text editor (Notepad, AkelPad, Notepad++, etc.) and
work with it from there.
Note however, that Balabolka's text extraction methods don't preserve
some formating information, including the page breaks and the pages
get merged in one large file with in some cases no distinction between
pages. In most cases however, there is at least one blank line between
pages, so you'll be able to distinct them from one another.
Even with all those suggestions for workarounds however, I strongly
suggest you to firstly try to open the PDF files in Acrobat Reader DC
and work with the text from within it, before trying any other PDF
viewer like Balabolka. Acrobat Reader DC is free and can be downloaded
from Adobe's website. You can copy text from PDF files from Acrobat
Reader DC, unless the PDF file in question is protected in a way that
prevents text copying to work at all. But in such a case, I doubt that
you be able to extract/copy text from such a PDF file even with
another PDF viewer like Balabolka for example.

______
Best wishes,
Kostadin Kolev

На 20.3.2016 г. в 10:52, nasrin khaksar написа:
hi every one.
i realy appreciate you if someone help me to learn how to use
balabolka, select words lines pages and copy and peist my selection.
i need working with pdf documents and now the only solution for me is
balabolka.
because sumatra is not accessible until now.
thanks so much and god bless you.

On 3/19/16, Brian's Mail list account <bglists@blueyonder.co.uk> wrote:
I've had little luck with this software either, so don't think its
just
you.

I suspect there is probably a distinct version which we have to use,
but I
do not know which it is and where to get it!
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "nasrin khaksar" <nasrinkhaksar3@gmail.com>
To: <nvda@groups.io>
Sent: Saturday, March 19, 2016 4:02 AM
Subject: [nvda] about balabolka and nvda.


hi every one.
i use balabolka and tried many versions of it.
but unfortunately i cant use it by nvda easily.
for example: when i want to select one character, one word, one line
and press shift left and right, shift control left and right, shift
up
and shift down nvda does not announce anything and i cant understand
what do i am doing.
who can teach me to solve this problem?
thanks for your help and god bless you.

--
Those who follow the Messenger-Prophet, the Ummi, whom they find
written down with them in the Taurat and the Injeel [who] enjoins
them
good and forbids them evil, and makes lawful to them the good things
and makes unlawful to them impure things, and removes from them their
burden and the shackles which were upon them; so [as for] those who
believe in him and honor him and help him, and follow the light which
has been sent down with him, these it is that are the successful.
holy quran, chapter 7, verse 157.
best website for studying islamic book in different languages
al-islam.org








--
Those who follow the Messenger-Prophet, the Ummi, whom they find
written down with them in the Taurat and the Injeel [who] enjoins them
good and forbids them evil, and makes lawful to them the good things
and makes unlawful to them impure things, and removes from them their
burden and the shackles which were upon them; so [as for] those who
believe in him and honor him and help him, and follow the light which
has been sent down with him, these it is that are the successful.
holy quran, chapter 7, verse 157.
best website for studying islamic book in different languages
al-islam.org
--
Check out my website for nvda tutorials and other blindness related material at http://www.accessibilitycentral.net


Re: audio ducking question

Patrick Le Baudour
 

Hello,

Your question seems clear enough to me, but so far i couldn't find anything to modify the attenuation factor. There is a windows option for ducking with phone calls (80% or 50%, not much of a choice), but nothing in nvda, narrator or as general setting that looks like that.
From what i've read so far, it cannot be controlled by nvda, it is handled by windows only.

-- Patrick

Le 20/03/2016 05:26, Hank Smith, and Seeing-eye dog Iona a écrit :
how do I tell it how much to duck the audio down for? when listening to
winamp it ducks the audio but it ducks it really low. I am sorry if
this isn't making any sense.
if it is not please let me know and I can try to explain my question a
bit better.
thanks
Hank



is there any option with NVDA to READ SINGLE DIGITS AND NOT A GROOUP OF DIGITS

Moti Azrad
 

Dear all,
 
The subject line explains well my question and if yes, how can I do it and which changes must be done to enable this feature?
 
Moti
 



Moti Azrad Musician & Piano tuner
motiaz@...
azrad_moty@...
motia@...
https://www.facebook.com/moti.azrad
ISRAEL