Date   

Re: special characters and punctuation feedback while typing in v2019.3.1

Martin Thomas Swaton
 

Hi Rui,



Are you talking when writing in a browser, in Skype and so on?

it does not matter where - right now I write in thunderbird, I also tryed firefox and Notebad.

It is a global behaviour

best,

Martin



Rui Fontes


Às 11:00 de 12/02/2020, Martin Thomas Swaton escreveu:
Hi,


I searched for this problem, but could not find a topic on it ... so if this already was asked, I am sorry...


Since the update the feedback of special characters and punctuation while typing has changed when you set the feedback to "words" and disable "characters".


normally special characters and punctuation was spoken emedeately on their keypress together with any other characters, that have been typed before.


example of old behaviour:

type: a.

feedback: a dot


new behavour:

type: a.

feedback: a


this is very problematic as you now do not get any feedback on typed special characters and punctuation. Try to type a smiley, you won't hear it. just silence.


Tried that with eloquence and espeak. So the speech/voice does not matter.


Hope this can be fixed

and additionally I would suggest to add a option/choice to choose wether special characters (and numbers) should be spoken emedeately on their keypress or together with other characters as whole words. So users could decide, which they prefer, as there where discussions in the past about that.


but right now it would be important to get back any feedback for theese special characters and punctuation.


cheers

Martin






Re: special characters and punctuation feedback while typing in v2019.3.1

Martin Thomas Swaton
 

Hi again,


the reboot did not change anything - as expected.


@Ralf I had 2019.2 (do not know which one exactly) installed on this computer (and still have it on my notebook) and there it works as expected.

   when I get back home, I can look at the version of nvda where it worked last.


cheers

Martin




Am 12.02.2020 um 13:04 schrieb Ralf Kefferpuetz:

Hi Quentin,

I understood Martin that he discovers that with typed chars off and typed words on. And that can beconfirmed at my end, but it was the same under 2019.2.1

 

Cheers,

  Ralf

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Quentin Christensen
Sent: Mittwoch, 12. Februar 2020 12:43
To: nvda@nvda.groups.io
Subject: Re: [nvda] special characters and punctuation feedback while typing in v2019.3.1

 

Hi Martin,

 

Have you restarted the computer since you updated NVDA?  I just tried type a. with speak typed characters on, and NVDA read "A dot" just as you expected.  I don't have Eloquence, but it worked the same with eSpeak and with Windows OneCore voices.

 

Occasionally you get random bugs (such as this) after installing or updating the software but before restarting the computer.  Restarting the computer shuts everything down and loads again from scratch so usually fixes up these random on-off issues.

 

Also double check that you have speak typed characters on as well :)

 

Kind regards

 

Quentin.

 

On Wed, Feb 12, 2020 at 10:00 PM Martin Thomas Swaton <list@...> wrote:

Hi,


I searched for this problem, but could not find a topic on it ... so if
this already was asked, I am sorry...


Since the update the feedback of special characters and punctuation
while typing has changed when you set the feedback to "words" and
disable "characters".


normally special characters and punctuation was spoken emedeately on
their keypress together with any other characters, that have been typed
before.


example of old behaviour:

type: a.

feedback: a dot


new behavour:

type: a.

feedback: a


this is very problematic as you now do not get any feedback on typed
special characters and punctuation. Try to type a smiley, you won't hear
it. just silence.


Tried that with eloquence and espeak. So the speech/voice does not matter.


Hope this can be fixed

and additionally I would suggest to add a option/choice to choose wether
special characters (and numbers) should be spoken emedeately on their
keypress or together with other characters as whole words. So users
could decide, which they prefer, as there where discussions in the past
about that.


but right now it would be important to get back any feedback for theese
special characters and punctuation.


cheers

Martin






 

--

Quentin Christensen
Training and Support Manager

 

 


Re: special characters and punctuation feedback while typing in v2019.3.1

Martin Thomas Swaton
 

Hi,


as I tryed to state, I want typed characters set to off! :-)

But still one has to get feedback on typed characters in word mode - they cannot be ignored, they have to be spoken as words then.

If someone wants spoken words feedback, it does not mean, that he does not care about which characters he typed ;-) ...as this smiley for example. I now did not hear if it was typed or not. I also do not get feedback about the "," and "." ...this is defenitely not how someone can write, even in speak-words mode.


I will restart the computer, but would be very surprised if that changes something ...

cheers

Martin


Am 12.02.2020 um 12:43 schrieb Quentin Christensen:

Hi Martin,

Have you restarted the computer since you updated NVDA?  I just tried type a. with speak typed characters on, and NVDA read "A dot" just as you expected.  I don't have Eloquence, but it worked the same with eSpeak and with Windows OneCore voices.

Occasionally you get random bugs (such as this) after installing or updating the software but before restarting the computer.  Restarting the computer shuts everything down and loads again from scratch so usually fixes up these random on-off issues.

Also double check that you have speak typed characters on as well :)

Kind regards

Quentin.

On Wed, Feb 12, 2020 at 10:00 PM Martin Thomas Swaton <list@...> wrote:
Hi,


I searched for this problem, but could not find a topic on it ... so if
this already was asked, I am sorry...


Since the update the feedback of special characters and punctuation
while typing has changed when you set the feedback to "words" and
disable "characters".


normally special characters and punctuation was spoken emedeately on
their keypress together with any other characters, that have been typed
before.


example of old behaviour:

type: a.

feedback: a dot


new behavour:

type: a.

feedback: a


this is very problematic as you now do not get any feedback on typed
special characters and punctuation. Try to type a smiley, you won't hear
it. just silence.


Tried that with eloquence and espeak. So the speech/voice does not matter.


Hope this can be fixed

and additionally I would suggest to add a option/choice to choose wether
special characters (and numbers) should be spoken emedeately on their
keypress or together with other characters as whole words. So users
could decide, which they prefer, as there where discussions in the past
about that.


but right now it would be important to get back any feedback for theese
special characters and punctuation.


cheers

Martin








--
Quentin Christensen
Training and Support Manager



Re: special characters and punctuation feedback while typing in v2019.3.1

Ralf Kefferpuetz
 

Hi Quentin,

I understood Martin that he discovers that with typed chars off and typed words on. And that can beconfirmed at my end, but it was the same under 2019.2.1

 

Cheers,

  Ralf

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Quentin Christensen
Sent: Mittwoch, 12. Februar 2020 12:43
To: nvda@nvda.groups.io
Subject: Re: [nvda] special characters and punctuation feedback while typing in v2019.3.1

 

Hi Martin,

 

Have you restarted the computer since you updated NVDA?  I just tried type a. with speak typed characters on, and NVDA read "A dot" just as you expected.  I don't have Eloquence, but it worked the same with eSpeak and with Windows OneCore voices.

 

Occasionally you get random bugs (such as this) after installing or updating the software but before restarting the computer.  Restarting the computer shuts everything down and loads again from scratch so usually fixes up these random on-off issues.

 

Also double check that you have speak typed characters on as well :)

 

Kind regards

 

Quentin.

 

On Wed, Feb 12, 2020 at 10:00 PM Martin Thomas Swaton <list@...> wrote:

Hi,


I searched for this problem, but could not find a topic on it ... so if
this already was asked, I am sorry...


Since the update the feedback of special characters and punctuation
while typing has changed when you set the feedback to "words" and
disable "characters".


normally special characters and punctuation was spoken emedeately on
their keypress together with any other characters, that have been typed
before.


example of old behaviour:

type: a.

feedback: a dot


new behavour:

type: a.

feedback: a


this is very problematic as you now do not get any feedback on typed
special characters and punctuation. Try to type a smiley, you won't hear
it. just silence.


Tried that with eloquence and espeak. So the speech/voice does not matter.


Hope this can be fixed

and additionally I would suggest to add a option/choice to choose wether
special characters (and numbers) should be spoken emedeately on their
keypress or together with other characters as whole words. So users
could decide, which they prefer, as there where discussions in the past
about that.


but right now it would be important to get back any feedback for theese
special characters and punctuation.


cheers

Martin






 

--

Quentin Christensen
Training and Support Manager

 

 


Re: nvda 2019.3 vocalizer, and remote support

Rui Fontes
 

Hello!


Go to the following folder:

%appdata%\vocalizer-for-nvda

and delete the activation.dat file.


Restart NVDA and you will be able to activate again...


Best regards,

 

Costumer support

Tiflotecnia, Lda.


Às 01:57 de 12/02/2020, nutkittirat@... escreveu:

Hello Rui, I have try to remove the activation but it doesn't work. Now I can't do anything with my activation, I can't check activation count or delete it and I can't change my credential from the menu too. I tried to remove the driver and reinstall it but it just doesn't work.


Re: special characters and punctuation feedback while typing in v2019.3.1

Quentin Christensen
 

Hi Martin,

Have you restarted the computer since you updated NVDA?  I just tried type a. with speak typed characters on, and NVDA read "A dot" just as you expected.  I don't have Eloquence, but it worked the same with eSpeak and with Windows OneCore voices.

Occasionally you get random bugs (such as this) after installing or updating the software but before restarting the computer.  Restarting the computer shuts everything down and loads again from scratch so usually fixes up these random on-off issues.

Also double check that you have speak typed characters on as well :)

Kind regards

Quentin.

On Wed, Feb 12, 2020 at 10:00 PM Martin Thomas Swaton <list@...> wrote:
Hi,


I searched for this problem, but could not find a topic on it ... so if
this already was asked, I am sorry...


Since the update the feedback of special characters and punctuation
while typing has changed when you set the feedback to "words" and
disable "characters".


normally special characters and punctuation was spoken emedeately on
their keypress together with any other characters, that have been typed
before.


example of old behaviour:

type: a.

feedback: a dot


new behavour:

type: a.

feedback: a


this is very problematic as you now do not get any feedback on typed
special characters and punctuation. Try to type a smiley, you won't hear
it. just silence.


Tried that with eloquence and espeak. So the speech/voice does not matter.


Hope this can be fixed

and additionally I would suggest to add a option/choice to choose wether
special characters (and numbers) should be spoken emedeately on their
keypress or together with other characters as whole words. So users
could decide, which they prefer, as there where discussions in the past
about that.


but right now it would be important to get back any feedback for theese
special characters and punctuation.


cheers

Martin








--
Quentin Christensen
Training and Support Manager



Re: Latest update with a lot of addons not working.

Josh Kennedy
 

Yes just buy eloquence because the paid version works much better and gets updated right away. You can buy it from www.atguys.com for around $65. 


Re: nvda 2019.3 vocalizer, and remote support

Rui Fontes
 

It must do it with the old driver...

If the new driver couldn't remove the activation, the only way is deleting the files in %appdata%\vocalizer-for-nvda.

We will increase the remaining activations upon notification by the user, or dealer, of that fact...


Best regards,

Rui Fontes

Tiflotecnia, Lda.


Às 09:26 de 12/02/2020, Simone Dal Maso escreveu:

Rui, an important question:
if a user install the new driver, is it possible to deactivate the old license from the new driver?

Il 12/02/2020 02:05, Rui Fontes ha scritto:
Hello!


The activation is removed through the NVDA/Vocalizer Expressive menu.

It will take some hours to be available again, and you will receive an e-mail notifying you that the activation is again available...


Best regards,

Rui Fontes

Tiflotecnia, Lda.



Às 04:23 de 11/02/2020, Ibrahim Abedrabbo escreveu:
Sorry Rui,
I downloaded the vocalizer add on you recommended in your link and re-downloaded the voices I need and installed all of them, but it did not help. This time I did not get a message that they are not compatible, but I got no speech at all. How do I remove the installation activation of the vocalizer so that I can reuse it?  I do not want to lose one activation trying and failing.
I now reinstalled NVDA 2019.2 and everything is working normal.
Where can I find the instruction on how to remove the activation and restore it in another installation?

Regards,
Ibrahim

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Rui Fontes
Sent: Monday, February 10, 2020 4:48 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] nvda 2019.3 vocalizer, and remote support

Hello!

You can get a NVDA 2019.3.1 compatible version at:
https://www.tiflotecnia.net/Instal/vocalizer_expressive_driver-3.1.0.nvda-addon

It still have one or two problems, but we are taking care of them...

Best regards,
Costumer support
Tiflotecnia, Lda.

Às 13:26 de 10/02/2020, David Mehler escreveu:
Hello,

I just updated to nvda 2019.3 and a bunch of my addons which wouldn't
update just broke/disabled. One of them is my nuance vocalizer drivers
and synth. I'm not seeing anything on addons.nvda-project.org on this.
Another is nvda remote support. Does this addon have a 2019.3
compatible version? I just checked addons.nvda-project.org and stable
looks like it isn't, actually i'm not seeing a download for that at
all.

Suggestions welcome.

Thanks.
Dave.









Numbers as digits being used a bit oddly in combination with certain specific number implementations - 11th, for example

Jacob Kruger
 

My primary TTS engine with NVDA has, for quite a while, been eSpeak-NG.


Anyway, partly due to being a programmer, I specifically prefer to stick
to having all numbers spoken out as digits, and, thus do have the
default speech dictionary entry for that, making use of a regular
expression match, but, for example, while this works fine with all
stand-alone numbers, it acts a bit odd, at times, when a number is
combined with something like a suffix, like th.


For example:

11th

is being pronounced to me as one therth


22nd gets read out as 2 second.


And, 11 on it's own would just get read out to me as one one, with 22
being read as two two, but, seems like there's something in one of the
hidden/built-in dictionaries that specifically tries to react to a
suffix like th or nd?


Now this would be fine if it was only applying this to a single digit
number - 1st, or 2nd, but, it seems like the combination of the numbers
as digits regular expression, along with this other factor is making it
sound odd to me at times?


Anyway, not too sure what would fix this perfectly all round, but, if
can track down the cause, then will try playing around with it a bit?


Jacob Kruger
Blind Biker
Skype: BlindZA
"...resistance is futile...but, acceptance is versatile..."


Re: special characters and punctuation feedback while typing in v2019.3.1

Rui Fontes
 

Hello!


Are you talking when writing in a browser, in Skype and so on?


Rui Fontes


Às 11:00 de 12/02/2020, Martin Thomas Swaton escreveu:

Hi,


I searched for this problem, but could not find a topic on it ... so if this already was asked, I am sorry...


Since the update the feedback of special characters and punctuation while typing has changed when you set the feedback to "words" and disable "characters".


normally special characters and punctuation was spoken emedeately on their keypress together with any other characters, that have been typed before.


example of old behaviour:

type: a.

feedback: a dot


new behavour:

type: a.

feedback: a


this is very problematic as you now do not get any feedback on typed special characters and punctuation. Try to type a smiley, you won't hear it. just silence.


Tried that with eloquence and espeak. So the speech/voice does not matter.


Hope this can be fixed

and additionally I would suggest to add a option/choice to choose wether special characters (and numbers) should be spoken emedeately on their keypress or together with other characters as whole words. So users could decide, which they prefer, as there where discussions in the past about that.


but right now it would be important to get back any feedback for theese special characters and punctuation.


cheers

Martin





special characters and punctuation feedback while typing in v2019.3.1

Martin Thomas Swaton
 

Hi,


I searched for this problem, but could not find a topic on it ... so if this already was asked, I am sorry...


Since the update the feedback of special characters and punctuation while typing has changed when you set the feedback to "words" and disable "characters".


normally special characters and punctuation was spoken emedeately on their keypress together with any other characters, that have been typed before.


example of old behaviour:

type: a.

feedback: a dot


new behavour:

type: a.

feedback: a


this is very problematic as you now do not get any feedback on typed special characters and punctuation. Try to type a smiley, you won't hear it. just silence.


Tried that with eloquence and espeak. So the speech/voice does not matter.


Hope this can be fixed

and additionally I would suggest to add a option/choice to choose wether special characters (and numbers) should be spoken emedeately on their keypress or together with other characters as whole words. So users could decide, which they prefer, as there where discussions in the past about that.


but right now it would be important to get back any feedback for theese special characters and punctuation.


cheers

Martin


Re: nvda 2019.3 vocalizer, and remote support

Simone Dal Maso
 

Rui, an important question:
if a user install the new driver, is it possible to deactivate the old license from the new driver?

Il 12/02/2020 02:05, Rui Fontes ha scritto:
Hello!
The activation is removed through the NVDA/Vocalizer Expressive menu.
It will take some hours to be available again, and you will receive an e-mail notifying you that the activation is again available...
Best regards,
Rui Fontes
Tiflotecnia, Lda.
Às 04:23 de 11/02/2020, Ibrahim Abedrabbo escreveu:
Sorry Rui,
I downloaded the vocalizer add on you recommended in your link and re-downloaded the voices I need and installed all of them, but it did not help. This time I did not get a message that they are not compatible, but I got no speech at all. How do I remove the installation activation of the vocalizer so that I can reuse it?  I do not want to lose one activation trying and failing.
I now reinstalled NVDA 2019.2 and everything is working normal.
Where can I find the instruction on how to remove the activation and restore it in another installation?

Regards,
Ibrahim

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Rui Fontes
Sent: Monday, February 10, 2020 4:48 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] nvda 2019.3 vocalizer, and remote support

Hello!

You can get a NVDA 2019.3.1 compatible version at:
https://www.tiflotecnia.net/Instal/vocalizer_expressive_driver-3.1.0.nvda-addon

It still have one or two problems, but we are taking care of them...

Best regards,
Costumer support
Tiflotecnia, Lda.

Às 13:26 de 10/02/2020, David Mehler escreveu:
Hello,

I just updated to nvda 2019.3 and a bunch of my addons which wouldn't
update just broke/disabled. One of them is my nuance vocalizer drivers
and synth. I'm not seeing anything on addons.nvda-project.org on this.
Another is nvda remote support. Does this addon have a 2019.3
compatible version? I just checked addons.nvda-project.org and stable
looks like it isn't, actually i'm not seeing a download for that at
all.

Suggestions welcome.

Thanks.
Dave.







Re: nvda 2019.3 vocalizer, and remote support

Robert Doc Wright godfearer
 

Did you hit Activate? I had to do this and then send in a problem ticket to Code Factory informing them of a lost key due to a NVDA upgrade. That we had no idea that the upgrade would be a problem for Eloquence.

 

******

If we can't look at ourselves, and ask, why?  then where does the learning start?

 

From: nutkittirat@...
Sent: Tuesday, February 11, 2020 6:57 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] nvda 2019.3 vocalizer, and remote support

 

Hello Rui, I have try to remove the activation but it doesn't work. Now I can't do anything with my activation, I can't check activation count or delete it and I can't change my credential from the menu too. I tried to remove the driver and reinstall it but it just doesn't work.

 


java access bridge doesn't work in nvda anymore

Michael Maslo
 


I am new to nVda and was wondering where I would get Java access Bridge From? Also I have seen a application like this before in the office I work at.I was wondering the Purpose of this application?

Any help would be appreciated.                                                             

Sincerely,

Michael maslo

On Feb 11, 2020, at 19:59, Quentin Christensen <quentin@...> wrote:


What is the Java program you are using which doesn't work?  Have you got a link to its website please?

Also have you restarted your computer since updating NVDA?  (It's worth doing that just because sometimes random things can misbehave in that time between updating software and restarting the PC).

Kind regards

Quentin.

On Wed, Feb 12, 2020 at 12:27 PM heike67 <heikesb1967@...> wrote:
hello
i have installed version 2019.3 and in >what's new in nvda< i can read that java access bridge is accessible now for nvda. i started an application that needs java to see if there are changes, it doesn't recognized anymore and java access bridge wasn't deactivated in ease of access center. some hours before it has still worked. can someone please help?
sorry if my english is not perfect.



--
Quentin Christensen
Training and Support Manager



Re: java access bridge doesn't work in nvda anymore

 

the program i use is Mediathek view and i have here a link to its website.
https://mediathekview.de/

i think i have something to explain. if you see the website, you will see the latest stable version, but i saw the nvda problem in an older version i turned back to last year, because my system said to the newer version something like: >this application can not be executed on your computer. i got no help from the developers, turned back to my older version and all was ok again until your latest update. and yes, i restarted my computer after i updated nvda and saw this problem.

kind regards

heike


Re: java access bridge doesn't work in nvda anymore

Quentin Christensen
 

What is the Java program you are using which doesn't work?  Have you got a link to its website please?

Also have you restarted your computer since updating NVDA?  (It's worth doing that just because sometimes random things can misbehave in that time between updating software and restarting the PC).

Kind regards

Quentin.

On Wed, Feb 12, 2020 at 12:27 PM heike67 <heikesb1967@...> wrote:
hello
i have installed version 2019.3 and in >what's new in nvda< i can read that java access bridge is accessible now for nvda. i started an application that needs java to see if there are changes, it doesn't recognized anymore and java access bridge wasn't deactivated in ease of access center. some hours before it has still worked. can someone please help?
sorry if my english is not perfect.



--
Quentin Christensen
Training and Support Manager



Re: nvda 2019.3 vocalizer, and remote support

nutkittirat@...
 

Hello Rui, I have try to remove the activation but it doesn't work. Now I can't do anything with my activation, I can't check activation count or delete it and I can't change my credential from the menu too. I tried to remove the driver and reinstall it but it just doesn't work.


Re: Latest update with a lot of addons not working.

Quentin Christensen
 

The official version of NVDA Remote is now available:  https://nvdaremote.com/download/

Also, I know the Code Factory site has a link to the updated Eloquence add-on (I believe it's the same product AT Guys sell, I'm not sure if the file itself is slightly different between resellers or if AT Guys have an updated link as well?): https://codefactoryglobal.com/app-store/voices-for-nvda/

Kind regards

Quentin.

On Wed, Feb 12, 2020 at 9:28 AM bering.p <bering.p@...> wrote:
Thanks RUI for the link, but it's the link of a beta  version.
The final release  number is 9.0 and you can download it with this link:
https://github.com/paulber007/AllMyNVDAAddons/raw/master/NVDAExtensionGlobalPlugin/NVDAExtensionGlobalPlugin-9.0.nvda-addon

Best regards.
Paul.

Le 11/02/2020 17:48, Rui Fontes a écrit :
> Hello!
>
>
> https://www.tiflotecnia.net/NVDAExtensionGlobalPlugin.nvda-addon
> https://www.tiflotecnia.net/NVDAExtensionGlobalPlugin.nvda-addon
>
>
> Rui Fontes
>
> Tiflotecnia, Lda.
>
>
> Às 16:34 de 11/02/2020, Christo Vorster escreveu:
>> Hi List
>>
>> I also require assistance regarding noncompatible addons.
>>
>> I am looking for the site to update NVDA global extensions addon.
>>
>> Please help
>>
>> Regards
>>
>> Christo Vorster (Worcester, South Africa)
>>
>>
>> -----Original Message-----
>> From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Nancy Shackelford
>> Sent: Tuesday, 11 February 2020 18:28
>> To: nvda@nvda.groups.io
>> Subject: [nvda] Latest update with a lot of addons not working.
>>
>> When the notice comes up about the new update, it tells you which apps are not compatible and that they will be disabled. My E T I Elloquence, my Tripletalk add-on, and I forgot the 3rd, will all be disabled when I get this new update installed. The site where I used to get these add-ons, 'Jeff's Repository' is down, so I can't get any of these. With the regular N V D A voices, I can't understand them very well, so I hope his site is repaired. If anyone has a new link, please share. My email address off list is n.k.nancelady@...
>>
>> Thanks,
>>
>> Nance
>>
>> --
>> Nancy Shackelford --Walk On Faith And Trust In Love - Michael Reid--
>>
>>
>>
>>
>>
>>
>>
>
>
>
>





--
Quentin Christensen
Training and Support Manager



Re: how to disable announcing of battery charging/not charging

Quentin Christensen
 

I'd concur with wanting to get to the root cause - stopping NVDA reporting whether the battery is charging or not will only silence the symptom, not fix the problem.

Check your battery, cable, transformer and power point.  Make sure everything is connected tightly etc - if you can replace any one of those things conveniently, that can at least rule that item out (eg I expect you should be able to plug it into a different power point to see if it keeps happening, which will at least confirm the powerpoint is ok).

On Wed, Feb 12, 2020 at 7:49 AM Tyler Spivey <tspivey@...> wrote:

Pop into the python console and paste this in, pressing enter after:


import winKernel;winKernel.GetSystemPowerStatus = lambda x: None


The worst that will happen is that NVDA will break, requiring a restart. No big deal.


On 2/11/2020 12:32 PM, Samuel Kacer wrote:
Hello,

my laptop seems to be going a bit haywire. Every couple seconds the battery goes from charging to not charging and back again. NVDA announcing this each time is extremely annoying.

I tried checking NVDA settings, but couldn't find anything. Is it possible to disable NVDA automatically announcing when battery starts/stops charging?

Much appreciated,
Sam



--
Quentin Christensen
Training and Support Manager



Re: Changed settings not working

Aravind R
 

eloquants synthesiser has that problem in nvda 2019.3 instead, use IBM
synthesiser and its eloquants posted recently.

On 12/02/2020, Nancy Shackelford <n.k.nancelady@...> wrote:
Thanks, Sarah. I have it set to notify me of updates, so they'll
probably have one soon and I'll get it.

Nance

--
Nancy Shackelford --Walk On Faith And Trust In Love - Michael Reid--




--
--
nothing is difficult unless you make it appear so.

r. aravind,

Assistant manager
Department of sales
bank of baroda specialised mortgage store, Chennai.
mobile no: +91 9940369593,
email id : aravind_069@..., aravind.andhrabank@....
aravind.rajendran@....