|
Re: say all not working in nvda beta
Blaster
I'm not having any trouble with the say all command, however, as Gene
toggle quoted messageShow quoted text
pointed out you should try both the laptop and desktop commands as on an earlier version update my "insert key plus down arrow" switched to the "caps lock plus down arrow" on it's own. Switching it back quickly fixed my issue, hope it works for you too. HTH, Blaster
On 1/5/20, Gene <gsasner@...> wrote:
I didn't see anyone shoot you down on the list. If you are referring to my
|
|
|
|
Re: say all not working in nvda beta
Gene
I didn't see anyone shoot you down on the
list. If you are referring to my message, I didn't shoot you down. I
asked for more information and I said that since the beta has been out for two
weeks or longer, the proboem may be specific to your system.
If that is what you are referring to, that isn't shooting anyone down. You asked for help and I answered telling you what I suspect and asking for more information. I didn't say you didn't have a problem, I don't
know. I said it may be specific to your machine.
And I am not a moderator. I was a
moderator.
Gene
----- Original Message -----
From: Carlos
Sent: Sunday, January 05, 2020 7:51 AM
Subject: Re: [nvda] say all not working in nvda
beta Yesterday I commented on this issue and one of the moderators decided to shoot me down! I was using NVDA 2019.3beta and I had to roll back to NVDA 2019.2.1 for these reasons that others are having with say all on it seems to happen on any program that uses say all command! Just remember that moderators pay attention to these posts and if it sounds negative to them you will get a stern talking to like I did! Hope that the RC version of NVDA 2019.3 will have these buffering issues fixed? On 1/5/2020 4:57 AM, Bryan Mckinnish wrote: > Hi. > > I upgraded to the nvda 2019.3 beta yesterday, all is going well so > far, but I ran into a little problem. > > I'm trying to read a document in notepad, and the say all command only > seems to read the line that the cursor is on. > > Is anyone else experiencing this? > > Thanks. > > Bryan Mckinnish > > > > > -- Carlos - Windows 10 Home, 64 Bit, Version 1909, Build 18363 - NVDA Version 2019.2
|
|
|
|
Re: burning mp3s to cd with NVDA
Damien Garwood
Hi,
toggle quoted messageShow quoted text
I use one called CDBurnerXP. www.cdburnerxp.se Cheers, Damien.
On 05/01/2020 06:53 pm, Dan Beaver wrote:
I have some mp3 files that I want to burn to a cd. I have tried using the normal burning method via windows media player but it says it can't burn some of the files and doesn't want to burn any of them. I thought I had another way using FreemakeVC but it will only convert audio files, it won't burn them to a CD.
|
|
|
|
Re: say all not working in nvda beta
Gene
What command are you using for say all and what
keyboard layout are you using? If you are using caps lock down arrow, make
sure you told NVDA to use the capslock as an NVDA key. If you don't know
or remember how, we'll tell you. What you are describing sounds like what
would be expected to happen if you try to use caps lock down arrow but you
didn't tell NVDA to use the caps lock as an NVDA key.
Gene
----- Original Message
-----
From: Bryan Mckinnish
Sent: Sunday, January 05, 2020 6:57 AM
Subject: [nvda] say all not working in nvda beta I upgraded to the nvda 2019.3 beta yesterday, all is going well so far, but I ran into a little problem. I'm trying to read a document in notepad, and the say all command only seems to read the line that the cursor is on. Is anyone else experiencing this? Thanks. Bryan Mckinnish
|
|
|
|
Re: creating start page with Firefox using NVDA
Gene
You already know how to open options. Once
you have done so, turn off browse mode or you won't see the list of
categories. The command to toggle it off and on is NVDA
space.
Now shift tab, its closer, until you get to the
list. NVDA says list.
Down arrow to home. Turn browse mode on again
and start tabbing. If something is unclear, up or down arrowing from where
you are may provide explanatory text, I haven't checked carefully enough to be
sure.
You will get to a combo box where you select what
you want, a blank page, a user determined page, or the Firefox page.
Work with the combo box as usual, open it with alt
down arrow and look through it. Tab after you find what you want and in
one or two tabs, you'll see options if you select the user URL. You will
see a combo box that repeats what you have been working with such as user URL
but don't worry about that. I think it’s the same one but again, I didn't
check. I just knew it was irrelevant and I kept tabbing.
You probably know how to do the rest, your problem
was probably that you didn't know how to get to the list of categories by going
into forms mode.
Gene
----- Original Message -----
From: Lisa P Geibel
Sent: Sunday, January 05, 2020 3:49 AM
To: NVDA
Subject: [nvda] creating start page with Firefox using
NVDA Using the latest version of NVDA and Firefox on a Windows 10 computer also using the latest build, how do you create a start page in Firefox? Please be detailed with the instructions as it looks so different than older versions of FF? Thanks. -- Lisa P. Geibel For Mine and Marcus's Christian and Messianic audio show, call 631-403-1002 and press 9997 for that show. For Marcus's Big Brother breaking news and shows, call the same number above, but press 9998 for that show. For either show, once you're in, press 1, then 0 If you want to hear previous shows, after dialing the above phone number and choosing which show you want, press 2. We'd love to hear from anyone about these shows and thank you for listening. email: lisapgeibel429@... Twitter: LisaLisa429 Facebook: m.facebook.com/ldporter1 May YHWH bless you all
|
|
|
|
Re: burning mp3s to cd with NVDA
Robert Doc Wright godfearer
Look for a program name, “burn aware free V6”.
****** character is found in how you treat people who cannot do anything for you!
From: Dan Beaver
Sent: Sunday, January 5, 2020 11:53 AM To: nvda@nvda.groups.io Subject: [nvda] burning mp3s to cd with NVDA
I have some mp3 files that I want to burn to a cd. I have tried using the normal burning method via windows media player but it says it can't burn some of the files and doesn't want to burn any of them. I thought I had another way using FreemakeVC but it will only convert audio files, it won't burn them to a CD.
Does anyone know of another way that is compatible with NVDA? Looking at google shows a ton of them but no indication which is NVDA compatible. Free would be better too. :)
Thanks.
-- Dan Beaver (KA4DAN) -- Dan Beaver (KA4DAN)
|
|
|
|
Re: burning mp3s to cd with NVDA
Rosemarie Chavarria
I use a program called Anyburn which you can get from www.anyburn.com.
Sent from Mail for Windows 10
From: Dan Beaver
Sent: Sunday, January 5, 2020 10:53 AM To: nvda@nvda.groups.io Subject: [nvda] burning mp3s to cd with NVDA
I have some mp3 files that I want to burn to a cd. I have tried using the normal burning method via windows media player but it says it can't burn some of the files and doesn't want to burn any of them. I thought I had another way using FreemakeVC but it will only convert audio files, it won't burn them to a CD.
Does anyone know of another way that is compatible with NVDA? Looking at google shows a ton of them but no indication which is NVDA compatible. Free would be better too. :)
Thanks.
-- Dan Beaver (KA4DAN) -- Dan Beaver (KA4DAN)
|
|
|
|
burning mp3s to cd with NVDA
Dan Beaver
I have some mp3 files that I want to burn to a cd. I have tried using the normal burning method via windows media player but it says it can't burn some of the files and doesn't want to burn any of them. I thought I had another way using FreemakeVC but it will only convert audio files, it won't burn them to a CD.
Does anyone know of another way that is compatible with NVDA? Looking at google shows a ton of them but no indication which is NVDA compatible. Free would be better too. :)
Thanks.
-- Dan Beaver (KA4DAN) -- Dan Beaver (KA4DAN)
|
|
|
|
Re: say all not working in nvda beta
Rui Fontes
I apologize by my statement ...
I should have been more careful ... Rui Fontes -----Mensagem original----- De: nvda@nvda.groups.io <nvda@nvda.groups.io> Em Nome De Sam Bushman Enviada: domingo, 5 de janeiro de 2020 17:09 Para: nvda@nvda.groups.io Assunto: Re: [nvda] say all not working in nvda beta Hi All, I feel the need to respond to this. Make such affirmation without sending a NVDA log is not very clever since lots of users, including myself, are using 2019.3 in Beta or Alpha versions and continuous reading works as ever.Each user is at different levels of understanding and capabilities with regards to Technology and especially NVDA. If I report something not working on this list and I either don't have the time or ability to provide more info that doesn't mean I shouldn't report it. Yes, providing instructions to get more info is more than helpful and encouraged. However, the comment above is not helpful. If I report something is not working - asking clarifying questions is also wonderful - but others can test and maybe someone with more experience can duplicate the issue. If that happens then the tip /report served its purpose. I hope in 2020 we can all respect one another and approach this list and the NVDA software with gratitude for all those who work so tirelessly to make it happen. I personally don't know where I would be without NVDA and all of you. I am able to make a living in Technology as a result of all your combined efforts and I for one and truly grateful for all of you and your associations. With Gratitude! Sam
|
|
|
|
Re: say all not working in nvda beta
On Sun, Jan 5, 2020 at 12:24 PM, Carlos wrote:
Next time I will clutter up the list with my log files instead of sending in to someone who has better knowledge and can fix things without having the list full of submitted log files!No, you won't. And neither will other members as a matter of routine course. There are occasions where one of the participants here who happens to be a developer asks for a log, then and only then is posting of same appropriate. Users of NVDA have the GitHub site that allows them to directly search existing issues and/or create new issues. This is a direct line to the NVDA development team. One of my goals this year for myself is trying to get in to the steps to create a GitHub account, search NVDA issues, add comments to existing issues when appropriate, or create a new issue when one exists. The NVDA group itself is not the correct mechanism for communicating with those doing NVDA development. If you luck out it works sometimes, but that's what it is, lucking out. It's not a problem to post saying you have an issue and asking if others are experiencing it. But one thing that users of any software need to understand is that most issues are idiosyncratic, not global. If you're having an issue and there are many responses that others are not having it the probability is that something is wrong on your machine, whether with that software or some underlying aspect of the operating system. When there are a ton of "I'm not having any issue" responses then the correct thing to do is start looking at your own machine first. The problem likely resides there, and will be resolved there, too. -- Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363 Most of the change we think we see in life is due to truths being in and out of favor. ~ Robert Frost, The Black Cottage (1914)
|
|
|
|
Re: say all not working in nvda beta
Carlos
Hello Again:
toggle quoted messageShow quoted text
As I explained in a previous message. I did submit a copy of my log file to a developer/contributor and he/she responded by telling me that entries in my log file showed that there were some buffering issues and that I should not worry about it for now! I was told that there were other issues that were being fixed which were/are more important to how NVDA 2019.3/2020.1 working correctly for all users! Nest time I will clutter up the list with my log files instead of sending in to someone who has better knowledge and can fix things without having the list full of submitted log files!
On 1/5/2020 9:08 AM, Sam Bushman wrote:
Hi All, --
Carlos - Windows 10 Home, 64 Bit, Version 1909, Build 18363 - NVDA Version 2019.2
|
|
|
|
Re: say all not working in nvda beta
molly the blind tech lover
Hi.
toggle quoted messageShow quoted text
I love NVDA so much. Words can not express how grateful I am. Without NVDA I would not be able to achieve my dream of becoming a software engineer. I am so grateful to all the NVDA developers and contributors and I love being a part of this list and the NVDA community. God Bless
-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Sam Bushman Sent: Sunday, January 5, 2020 12:09 PM To: nvda@nvda.groups.io Subject: Re: [nvda] say all not working in nvda beta Hi All, I feel the need to respond to this. Make such affirmation without sending a NVDA log is not very clever since lots of users, including myself, are using 2019.3 in Beta or Alpha versions and continuous reading works as ever.Each user is at different levels of understanding and capabilities with regards to Technology and especially NVDA. If I report something not working on this list and I either don't have the time or ability to provide more info that doesn't mean I shouldn't report it. Yes, providing instructions to get more info is more than helpful and encouraged. However, the comment above is not helpful. If I report something is not working - asking clarifying questions is also wonderful - but others can test and maybe someone with more experience can duplicate the issue. If that happens then the tip /report served its purpose. I hope in 2020 we can all respect one another and approach this list and the NVDA software with gratitude for all those who work so tirelessly to make it happen. I personally don't know where I would be without NVDA and all of you. I am able to make a living in Technology as a result of all your combined efforts and I for one and truly grateful for all of you and your associations. With Gratitude! Sam
|
|
|
|
Re: say all not working in nvda beta
Sam Bushman
Hi All,
I feel the need to respond to this. Make such affirmation without sending a NVDA log is not very clever since lots of users, including myself, are using 2019.3 in Beta or Alpha versions and continuous reading works as ever.Each user is at different levels of understanding and capabilities with regards to Technology and especially NVDA. If I report something not working on this list and I either don't have the time or ability to provide more info that doesn't mean I shouldn't report it. Yes, providing instructions to get more info is more than helpful and encouraged. However, the comment above is not helpful. If I report something is not working - asking clarifying questions is also wonderful - but others can test and maybe someone with more experience can duplicate the issue. If that happens then the tip /report served its purpose. I hope in 2020 we can all respect one another and approach this list and the NVDA software with gratitude for all those who work so tirelessly to make it happen. I personally don't know where I would be without NVDA and all of you. I am able to make a living in Technology as a result of all your combined efforts and I for one and truly grateful for all of you and your associations. With Gratitude! Sam
|
|
|
|
Re: say all not working in nvda beta
Rui Fontes
Strange... Maybe caused by some add-on...
toggle quoted messageShow quoted text
I am using the 2019.3 Alphas since they appear wit Python 3 and never noticed that... Regards, Rui Fontes -----Mensagem original----- De: nvda@nvda.groups.io <nvda@nvda.groups.io> Em Nome De Carlos Enviada: domingo, 5 de janeiro de 2020 16:05 Para: nvda@nvda.groups.io Assunto: Re: [nvda] say all not working in nvda beta Hello: When I first noticed the say all issue I did send a copy of my log file to an NVDA developer/contributor and he/she told me that there were buffering issues but that it would be taken care of at some point and that there were others issues that are more important and were being looked at first! So, I just rolled back to NVDA 2019.2.1 until the RC version of NVDA 2019.3/2020.1 comes out!
On 1/5/2020 7:39 AM, Rui Fontes wrote:
Hello Carlos and Bryan Mckinnish! --
Carlos - Windows 10 Home, 64 Bit, Version 1909, Build 18363 - NVDA Version 2019.2
|
|
|
|
Re: say all not working in nvda beta
Carlos
Hello:
toggle quoted messageShow quoted text
When I first noticed the say all issue I did send a copy of my log file to an NVDA developer/contributor and he/she told me that there were buffering issues but that it would be taken care of at some point and that there were others issues that are more important and were being looked at first! So, I just rolled back to NVDA 2019.2.1 until the RC version of NVDA 2019.3/2020.1 comes out!
On 1/5/2020 7:39 AM, Rui Fontes wrote:
Hello Carlos and Bryan Mckinnish! --
Carlos - Windows 10 Home, 64 Bit, Version 1909, Build 18363 - NVDA Version 2019.2
|
|
|
|
Re: say all not working in nvda beta
Rui Fontes
Hello Carlos and Bryan Mckinnish!
toggle quoted messageShow quoted text
Make such affirmation without sending a NVDA log is not very clever since lots of users, including myself, are using 2019.3 in Beta or Alpha versions and continuous reading works as ever... So, please do the following: 1 - Run NVDA with add-ons disabled; 2 - If SayAll it is yet not working as it should, restart NVDA with the log enabled; 3 - Get the log and send us. Be aware that the log will show your passwords, so clean the log file of that... Best regards, Rui Fontes NVDA portuguese team -----Mensagem original----- De: nvda@nvda.groups.io <nvda@nvda.groups.io> Em Nome De Carlos Enviada: domingo, 5 de janeiro de 2020 13:52 Para: nvda@nvda.groups.io Assunto: Re: [nvda] say all not working in nvda beta Hello: Yesterday I commented on this issue and one of the moderators decided to shoot me down! I was using NVDA 2019.3beta and I had to roll back to NVDA 2019.2.1 for these reasons that others are having with say all on it seems to happen on any program that uses say all command! Just remember that moderators pay attention to these posts and if it sounds negative to them you will get a stern talking to like I did! Hope that the RC version of NVDA 2019.3 will have these buffering issues fixed?
On 1/5/2020 4:57 AM, Bryan Mckinnish wrote:
Hi. --
Carlos - Windows 10 Home, 64 Bit, Version 1909, Build 18363 - NVDA Version 2019.2
|
|
|
|
Re: say all not working in nvda beta
Ralf Kefferpuetz
Hello,
toggle quoted messageShow quoted text
I can't reproduce it here at my end. Read to end works as in 2019.2.1 for me. Regards, Ralf
-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Carlos Sent: Sonntag, 5. Januar 2020 14:52 To: nvda@nvda.groups.io Subject: Re: [nvda] say all not working in nvda beta Hello: Yesterday I commented on this issue and one of the moderators decided to shoot me down! I was using NVDA 2019.3beta and I had to roll back to NVDA 2019.2.1 for these reasons that others are having with say all on it seems to happen on any program that uses say all command! Just remember that moderators pay attention to these posts and if it sounds negative to them you will get a stern talking to like I did! Hope that the RC version of NVDA 2019.3 will have these buffering issues fixed? On 1/5/2020 4:57 AM, Bryan Mckinnish wrote: Hi.-- Carlos - Windows 10 Home, 64 Bit, Version 1909, Build 18363 - NVDA Version 2019.2
|
|
|
|
Re: what's NVDA latest version right now in JAN/5/2020.
Ralf Kefferpuetz
Hello,
toggle quoted messageShow quoted text
Please stay with 2019.2.1 until 2019.3 is released. Currently it is at Beta 1. Regards, Ralf
-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of aikeo koomanivong Sent: Sonntag, 5. Januar 2020 14:51 To: nvda <nvda@groups.io> Subject: [nvda] what's NVDA latest version right now in JAN/5/2020. hello all NVDA users i'm KEO I've a question because NVDA addon updater ask me to update 5 addons however i cannot install because it told me need to be use NVDA version 2019.3 but when i check my NVDA only version 2019.2.1 and no update to NVDA 2019.3 thanks for help -- AIKEO KOOMANIVONG CFBT-ICEVI coordinator of LAO PDR. vise president accessible ICT and musical development for the blind Vocational development for LAO-blind association [VDBA] Office e-mail: vdba.lao@... Facebook page: www.facebook.com/laoblind.org my personal e-mail: mlp_keo@... skype name: peba_007 mobile phone: +8562099993423 Facebook: www.facebook.com/keo.laoblind Linkedin: https://www.linkedin.com/pub/aikeo-koomanivong/a7/156/b8b
|
|
|
|
Re: say all not working in nvda beta
Carlos
Hello:
toggle quoted messageShow quoted text
Yesterday I commented on this issue and one of the moderators decided to shoot me down! I was using NVDA 2019.3beta and I had to roll back to NVDA 2019.2.1 for these reasons that others are having with say all on it seems to happen on any program that uses say all command! Just remember that moderators pay attention to these posts and if it sounds negative to them you will get a stern talking to like I did! Hope that the RC version of NVDA 2019.3 will have these buffering issues fixed?
On 1/5/2020 4:57 AM, Bryan Mckinnish wrote:
Hi. --
Carlos - Windows 10 Home, 64 Bit, Version 1909, Build 18363 - NVDA Version 2019.2
|
|
|
|
what's NVDA latest version right now in JAN/5/2020.
aikeo koomanivong
hello all NVDA users
i'm KEO I've a question because NVDA addon updater ask me to update 5 addons however i cannot install because it told me need to be use NVDA version 2019.3 but when i check my NVDA only version 2019.2.1 and no update to NVDA 2019.3 thanks for help -- AIKEO KOOMANIVONG CFBT-ICEVI coordinator of LAO PDR. vise president accessible ICT and musical development for the blind Vocational development for LAO-blind association [VDBA] Office e-mail: vdba.lao@... Facebook page: www.facebook.com/laoblind.org my personal e-mail: mlp_keo@... skype name: peba_007 mobile phone: +8562099993423 Facebook: www.facebook.com/keo.laoblind Linkedin: https://www.linkedin.com/pub/aikeo-koomanivong/a7/156/b8b
|
|
|
