I have both abbyy and knfb I got knfb on convention week last year or was it the year before when it was only 20 us it is a good program but had no idea it works with a scanner.

On 11/01/2020 10:08 am, hurrikennyandopo ... wrote:

Hi

The app I use on my windows 10 machine is KNFB reader and is very accessible with nvda. it works with my flat bed scanner/printer and it seems if you have a couple of computers with the same account and a spare scanner it can be installed on the other computer as well.

I think also you can trial it 25 scans with some limitations then it has to be brought. Not sure what price it is now I did not think it was that bad may be 90 dollars kiwi on sale? You would ahve to see how much in your language dollars but only works on windows 10.

Gene nz

On 10/01/2020 8:26 pm, Brian Crabtree wrote:

I don’t have any recent experience of Abbyy, but I set up Omnipage for a friend in 2018 and he finds it works well with his flatbed scanner. 

I set up two simple workflows using Omnipage itself (I can’t write scripts) and he runs them using NVDA, rather than using the buttons on the scanner. 

What follows are my instructions on using the workflows, in case they might help someone to choose between Abby and Omnipage. Here they are:

The workflows allow you to choose either to scan a physical document before doing O C R or to select a document to O C R - for example, a file that was attached to an email, so is already in electronic form but is not yet readable by NVDA.

Each set of instructions to Omnipage is called a workflow - the one you will normally want I have called "Scan to Word”. 

The way to run a scan is to start Omnipage from the TaskBar, using Windows key plus T for Tango, then arrowing to Omnipage and pressing Enter to start it.

It seems that Omnipage does not remember which workflow you were using last, so you need to change the workflow each time, as follows:

• Load Omnipage.
• Remove the document it has saved from the previous run, if any, by pressing alt plus f then n.
• Press No when asked to save it.
• Select the correct workflow using alt plus p then w to open the workflows list.
• Arrow down to the one for “Scan to Word” and press Enter to select it.
• Start the selected workflow using alt plus p then w then s - if you are scanning, the scan will start.
• N B  if you choose the workflow to O C R a file that you have saved earlier (e.g. one which was attached to an email) you will be taken to a File Explorer window, to choose it, with the current directory set to Downloads, so it’s easiest if you save attachments in the Downloads folder.
• Wait for the workflow to complete - for the scan workflow, click the "stop loading pages" button.
• NVDA seems not to speak, so alt plus tab out & back to start speech and you should hear it speak the wording that has been recognised.

If NVDA refuses to speak, you can get Omnipage to voice the result. After pressing caps lock plus S (twice) to turn NVDA speech off:

• turn on Omnipage's speech mode by pressing F5 or alt plus t then s.
• press ctrl plus end to hear the result spoken.
• you can interrupt or stop Omnipage speech by pressing F.
• after it finishes, turn NVDA speech back on with caps lock plus S.

Yeah you need to change all the eloquence stuff from its control panel.

This interestingly does not apply to vocaliser, but yeah you need to

change voices to.

On 11/01/2020, Robert Doc Wright godfearer <godfearer@...> wrote:

> With the Sappi5 version I purchased  from Code Factory, “eloquence for

> Windows”, When I do the standard ways of changing rate or volume nothing

> happens. I wind up having to open eloquence to make the changes.

> 

> ******

> character is found in how you treat people who cannot do anything for

> you!

> 

> 

> From: Gene

> Sent: Friday, January 10, 2020 9:08 AM

> To: nvda@nvda.groups.io

> Subject: Re: [nvda] Purchasing Eloquence

> 

> Do you mean you have to open NVDA settings or Eloquence settings?  There are

> both options.  I don't set such settings using the NVDA settings ring but I

> never had problems doing so opening NVDA settings and changing them there.

> 

> Gene

> ----- Original Message -----

> From: Robert Doc Wright godfearer

> Sent: Friday, January 10, 2020 12:16 AM

> To: nvda@nvda.groups.io

> Subject: Re: [nvda] Purchasing Eloquence

> 

> What I am noticing is that with the Sappi voice you lose the ability to

> change speed, volume, pitch and rate. You have to open Eloquence to make

> those  changes.

> 

> ******

> character is found in how you treat people who cannot do anything for

> you!

> 

> 

> From: coccinelle@...

> Sent: Thursday, January 9, 2020 5:27 PM

> To: nvda@nvda.groups.io

> Subject: Re: [nvda] Purchasing Eloquence

> 

> Is there a difference between the NVDA and the SAPI voices?

> Thanks

> Blessings

> Pascal

> 

> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Shaun Everiss

> Sent: Thursday, January 9, 2020 4:56 PM

> To: nvda@nvda.groups.io

> Subject: Re: [nvda] Purchasing Eloquence

> 

> atguys.com has both the nvda and sapi versions.

> Their support is good.

> 

> 

> On 10/01/2020 10:51 am, Dan Kerstetter wrote:

> Hello all.

> 

> Where is the best place from which to purchase the Eloquence speech

> synthesizer?  I’ve been to the code factory site; downloaded eloquence from

> their app store, but don’t know how to register/purchase it.

> 

> Any help, info or suggestions would be greatly appreciated.

> 

> Thanks in advance.

> 

> For an hour of good alternative and classic rock tune in to my show:  A

> Little Bit of This and a Little Bit of That  Monday at 5:00 eastern and

> Tuesday and Friday 8:00 eastern on out of sight radio.

> 

> http://www.out-of-sight.net/radio

> 

> 

> 

> 

> 

>

> 

> 

Hi Shaun,



The k in knfb comes from Kurzweil.

The earliest versions of Kurzweil scanning software go back to the
seventies.



From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Shaun
Everiss
Sent: January-10-20 4:41 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] OCR



I have both abbyy and knfb I got knfb on convention week last year or was it
the year before when it was only 20 us it is a good program but had no idea
it works with a scanner.





On 11/01/2020 10:08 am, hurrikennyandopo ... wrote:

Hi



The app I use on my windows 10 machine is KNFB reader and is very accessible
with nvda. it works with my flat bed scanner/printer and it seems if you
have a couple of computers with the same account and a spare scanner it can
be installed on the other computer as well.



I think also you can trial it 25 scans with some limitations then it has to
be brought. Not sure what price it is now I did not think it was that bad
may be 90 dollars kiwi on sale? You would ahve to see how much in your
language dollars but only works on windows 10.



Gene nz



On 10/01/2020 8:26 pm, Brian Crabtree wrote:

I don’t have any recent experience of Abbyy, but I set up Omnipage for a
friend in 2018 and he finds it works well with his flatbed scanner.



I set up two simple workflows using Omnipage itself (I can’t write scripts)
and he runs them using NVDA, rather than using the buttons on the scanner.



What follows are my instructions on using the workflows, in case they might
help someone to choose between Abby and Omnipage. Here they are:



The workflows allow you to choose either to scan a physical document before
doing O C R or to select a document to O C R - for example, a file that was
attached to an email, so is already in electronic form but is not yet
readable by NVDA.



Each set of instructions to Omnipage is called a workflow - the one you will
normally want I have called "Scan to Word”.



The way to run a scan is to start Omnipage from the TaskBar, using Windows
key plus T for Tango, then arrowing to Omnipage and pressing Enter to start
it.



It seems that Omnipage does not remember which workflow you were using last,
so you need to change the workflow each time, as follows:

* Load Omnipage.
* Remove the document it has saved from the previous run, if any, by
pressing alt plus f then n.
* Press No when asked to save it.
* Select the correct workflow using alt plus p then w to open the workflows
list.
* Arrow down to the one for “Scan to Word” and press Enter to select it.
* Start the selected workflow using alt plus p then w then s - if you are
scanning, the scan will start.
* N B if you choose the workflow to O C R a file that you have saved
earlier (e.g. one which was attached to an email) you will be taken to a
File Explorer window, to choose it, with the current directory set to
Downloads, so it’s easiest if you save attachments in the Downloads folder.
* Wait for the workflow to complete - for the scan workflow, click the "stop
loading pages" button.
* NVDA seems not to speak, so alt plus tab out & back to start speech and
you should hear it speak the wording that has been recognised.

If NVDA refuses to speak, you can get Omnipage to voice the result. After
pressing caps lock plus S (twice) to turn NVDA speech off:

* turn on Omnipage's speech mode by pressing F5 or alt plus t then s.
* press ctrl plus end to hear the result spoken.
* you can interrupt or stop Omnipage speech by pressing F.
* after it finishes, turn NVDA speech back on with caps lock plus S.

Check the settings in the actual Eloquence program itself.  I've used the demo but I didn't work with the settings enough to remember how you get to this one.  But in the settings for the voices themselves, there is a force setting.  Make sure it is off.  Force causes the voices to disregard screen-reader settings and use settings for the voices themselves.  It is off by default but yours may be on for some reason.

I just purchased mine and no matter what I do if I press NVDA+ctrl+the arrow keys the changes do not take affect. If I press NVDA+ctrl+v and make changes they are not taking affect. Only when I open Sappi5 eloquence. On Code factory’s page I don’t recall seeing a choice between Sappi5 and NVDA. Only   eloquence for windows.

******

character is found in how you treat people who cannot do anything for you!                                                                       

Uh, no you don't. I can make those changes from the synth settings ring

or the menus just fine. You've been able to do that since I bought it,

and I think I'm up to version 1.6.6 or something. Unless they made a new

version and broke something in the last month or so, you should be able

to change settings without opening Eloquence. I only open mine if I need

to deactivate before a major Windows update, and reactivate afterwards.

On 1/10/2020 0:16, Robert Doc Wright godfearer wrote:

> 

> What I am noticing is that with the Sappi voice you lose the ability

> to change speed, volume, pitch and rate. You have to open Eloquence to

> make those  changes.

> 

> ******

> 

> character is found in how you treat people who cannot do anything for

> you!

> 

> *From: *coccinelle@... <mailto:coccinelle@...>

> *Sent: *Thursday, January 9, 2020 5:27 PM

> *To: *nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>

> *Subject: *Re: [nvda] Purchasing Eloquence

> 

> Is there a difference between the NVDA and the SAPI voices?

> 

> Thanks

> 

> Blessings

> 

> Pascal

> 

> *From:* nvda@nvda.groups.io <nvda@nvda.groups.io> *On Behalf Of *Shaun

> Everiss

> *Sent:* Thursday, January 9, 2020 4:56 PM

> *To:* nvda@nvda.groups.io

> *Subject:* Re: [nvda] Purchasing Eloquence

> 

> atguys.com has both the nvda and sapi versions.

> 

> Their support is good.

> 

> On 10/01/2020 10:51 am, Dan Kerstetter wrote:

> 

>     Hello all.

> 

>     Where is the best place from which to purchase the Eloquence

>     speech synthesizer?  I’ve been to the code factory site;

>     downloaded eloquence from their app store, but don’t know how to

>     register/purchase it.

> 

>     Any help, info or suggestions would be greatly appreciated.

> 

>     Thanks in advance.

> 

>     For an hour of good alternative and classic rock tune in to my

>     show:  A Little Bit of This and a Little Bit of That  Monday at

>     5:00 eastern and Tuesday and Friday 8:00 eastern on out of sight

>     radio.

> 

>     http://www.out-of-sight.net/radio

> 

>

With the Sappi5 version I purchased from Code Factory, “eloquence for
Windows”, When I do the standard ways of changing rate or volume nothing
happens. I wind up having to open eloquence to make the changes.

******
character is found in how you treat people who cannot do anything for
you!


From: Gene
Sent: Friday, January 10, 2020 9:08 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Purchasing Eloquence

Do you mean you have to open NVDA settings or Eloquence settings?  There are
both options.  I don't set such settings using the NVDA settings ring but I
never had problems doing so opening NVDA settings and changing them there.

Gene
----- Original Message -----
From: Robert Doc Wright godfearer
Sent: Friday, January 10, 2020 12:16 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Purchasing Eloquence

What I am noticing is that with the Sappi voice you lose the ability to
change speed, volume, pitch and rate. You have to open Eloquence to make
those  changes.

******
character is found in how you treat people who cannot do anything for
you!


From: coccinelle@tds.net
Sent: Thursday, January 9, 2020 5:27 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Purchasing Eloquence

Is there a difference between the NVDA and the SAPI voices?
Thanks
Blessings
Pascal

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Shaun Everiss
Sent: Thursday, January 9, 2020 4:56 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Purchasing Eloquence

atguys.com has both the nvda and sapi versions.
Their support is good.


On 10/01/2020 10:51 am, Dan Kerstetter wrote:
Hello all.

Where is the best place from which to purchase the Eloquence speech
synthesizer?  I’ve been to the code factory site; downloaded eloquence from
their app store, but don’t know how to register/purchase it.

Any help, info or suggestions would be greatly appreciated.

Thanks in advance.

For an hour of good alternative and classic rock tune in to my show:  A
Little Bit of This and a Little Bit of That  Monday at 5:00 eastern and
Tuesday and Friday 8:00 eastern on out of sight radio.

http://www.out-of-sight.net/radio

Do you mean you have to open NVDA settings or Eloquence settings?  There are both options.  I don't set such settings using the NVDA settings ring but I never had problems doing so opening NVDA settings and changing them there.

What I am noticing is that with the Sappi voice you lose the ability to change speed, volume, pitch and rate. You have to open Eloquence to make those  changes.

******

character is found in how you treat people who cannot do anything for you!                                                                       

Is there a difference between the NVDA and the SAPI voices?

Thanks

Blessings

Pascal

atguys.com has both the nvda and sapi versions.

Their support is good.

Hello all.

 

Where is the best place from which to purchase the Eloquence speech synthesizer?  I’ve been to the code factory site; downloaded eloquence from their app store, but don’t know how to register/purchase it.

 

Any help, info or suggestions would be greatly appreciated.

 

Thanks in advance.

 

For an hour of good alternative and classic rock tune in to my show:  A Little Bit of This and a Little Bit of That  Monday at 5:00 eastern and Tuesday and Friday 8:00 eastern on out of sight radio.

 

http://www.out-of-sight.net/radio

 

I have both abbyy and knfb I got knfb on convention week last year or was it the year before when it was only 20 us it is a good program but had no idea it works with a scanner.

Hi

 

The app I use on my windows 10 machine is KNFB reader and is very accessible with nvda. it works with my flat bed scanner/printer and it seems if you have a couple of computers with the same account and a spare scanner it can be installed on the other computer as well.

 

I think also you can trial it 25 scans with some limitations then it has to be brought. Not sure what price it is now I did not think it was that bad may be 90 dollars kiwi on sale? You would ahve to see how much in your language dollars but only works on windows 10.

 

Gene nz

 

On 10/01/2020 8:26 pm, Brian Crabtree wrote:

I don’t have any recent experience of Abbyy, but I set up Omnipage for a friend in 2018 and he finds it works well with his flatbed scanner. 

 

I set up two simple workflows using Omnipage itself (I can’t write scripts) and he runs them using NVDA, rather than using the buttons on the scanner. 

 

What follows are my instructions on using the workflows, in case they might help someone to choose between Abby and Omnipage. Here they are:

 

The workflows allow you to choose either to scan a physical document before doing O C R or to select a document to O C R - for example, a file that was attached to an email, so is already in electronic form but is not yet readable by NVDA.

 

Each set of instructions to Omnipage is called a workflow - the one you will normally want I have called "Scan to Word”. 

 

The way to run a scan is to start Omnipage from the TaskBar, using Windows key plus T for Tango, then arrowing to Omnipage and pressing Enter to start it.

 

It seems that Omnipage does not remember which workflow you were using last, so you need to change the workflow each time, as follows:

• Load Omnipage.
• Remove the document it has saved from the previous run, if any, by pressing alt plus f then n.
• Press No when asked to save it.
• Select the correct workflow using alt plus p then w to open the workflows list.
• Arrow down to the one for “Scan to Word” and press Enter to select it.
• Start the selected workflow using alt plus p then w then s - if you are scanning, the scan will start.
• N B  if you choose the workflow to O C R a file that you have saved earlier (e.g. one which was attached to an email) you will be taken to a File Explorer window, to choose it, with the current directory set to Downloads, so it’s easiest if you save attachments in the Downloads folder.
• Wait for the workflow to complete - for the scan workflow, click the "stop loading pages" button.
• NVDA seems not to speak, so alt plus tab out & back to start speech and you should hear it speak the wording that has been recognised.

If NVDA refuses to speak, you can get Omnipage to voice the result. After pressing caps lock plus S (twice) to turn NVDA speech off:

• turn on Omnipage's speech mode by pressing F5 or alt plus t then s.
• press ctrl plus end to hear the result spoken.
• you can interrupt or stop Omnipage speech by pressing F.
• after it finishes, turn NVDA speech back on with caps lock plus S.

 

 

Hi

The app I use on my windows 10 machine is KNFB reader and is very accessible with nvda. it works with my flat bed scanner/printer and it seems if you have a couple of computers with the same account and a spare scanner it can be installed on the other computer as well.

I think also you can trial it 25 scans with some limitations then it has to be brought. Not sure what price it is now I did not think it was that bad may be 90 dollars kiwi on sale? You would ahve to see how much in your language dollars but only works on windows 10.

Gene nz

On 10/01/2020 8:26 pm, Brian Crabtree wrote:

I don’t have any recent experience of Abbyy, but I set up Omnipage for a friend in 2018 and he finds it works well with his flatbed scanner. 

I set up two simple workflows using Omnipage itself (I can’t write scripts) and he runs them using NVDA, rather than using the buttons on the scanner. 

What follows are my instructions on using the workflows, in case they might help someone to choose between Abby and Omnipage. Here they are:

The workflows allow you to choose either to scan a physical document before doing O C R or to select a document to O C R - for example, a file that was attached to an email, so is already in electronic form but is not yet readable by NVDA.

Each set of instructions to Omnipage is called a workflow - the one you will normally want I have called "Scan to Word”. 

The way to run a scan is to start Omnipage from the TaskBar, using Windows key plus T for Tango, then arrowing to Omnipage and pressing Enter to start it.

It seems that Omnipage does not remember which workflow you were using last, so you need to change the workflow each time, as follows:

• Load Omnipage.
• Remove the document it has saved from the previous run, if any, by pressing alt plus f then n.
• Press No when asked to save it.
• Select the correct workflow using alt plus p then w to open the workflows list.
• Arrow down to the one for “Scan to Word” and press Enter to select it.
• Start the selected workflow using alt plus p then w then s - if you are scanning, the scan will start.
• N B  if you choose the workflow to O C R a file that you have saved earlier (e.g. one which was attached to an email) you will be taken to a File Explorer window, to choose it, with the current directory set to Downloads, so it’s easiest if you save attachments in the Downloads folder.
• Wait for the workflow to complete - for the scan workflow, click the "stop loading pages" button.
• NVDA seems not to speak, so alt plus tab out & back to start speech and you should hear it speak the wording that has been recognised.

If NVDA refuses to speak, you can get Omnipage to voice the result. After pressing caps lock plus S (twice) to turn NVDA speech off:

• turn on Omnipage's speech mode by pressing F5 or alt plus t then s.
• press ctrl plus end to hear the result spoken.
• you can interrupt or stop Omnipage speech by pressing F.
• after it finishes, turn NVDA speech back on with caps lock plus S.

I don’t have any recent experience of Abbyy, but I set up Omnipage for a friend in 2018 and he finds it works well with his flatbed scanner. 

I set up two simple workflows using Omnipage itself (I can’t write scripts) and he runs them using NVDA, rather than using the buttons on the scanner. 

What follows are my instructions on using the workflows, in case they might help someone to choose between Abby and Omnipage. Here they are:

The workflows allow you to choose either to scan a physical document before doing O C R or to select a document to O C R - for example, a file that was attached to an email, so is already in electronic form but is not yet readable by NVDA.

Each set of instructions to Omnipage is called a workflow - the one you will normally want I have called "Scan to Word”. 

The way to run a scan is to start Omnipage from the TaskBar, using Windows key plus T for Tango, then arrowing to Omnipage and pressing Enter to start it.

It seems that Omnipage does not remember which workflow you were using last, so you need to change the workflow each time, as follows:

• Load Omnipage.
• Remove the document it has saved from the previous run, if any, by pressing alt plus f then n.
• Press No when asked to save it.
• Select the correct workflow using alt plus p then w to open the workflows list.
• Arrow down to the one for “Scan to Word” and press Enter to select it.
• Start the selected workflow using alt plus p then w then s - if you are scanning, the scan will start.
• N B  if you choose the workflow to O C R a file that you have saved earlier (e.g. one which was attached to an email) you will be taken to a File Explorer window, to choose it, with the current directory set to Downloads, so it’s easiest if you save attachments in the Downloads folder.
• Wait for the workflow to complete - for the scan workflow, click the "stop loading pages" button.
• NVDA seems not to speak, so alt plus tab out & back to start speech and you should hear it speak the wording that has been recognised.

If NVDA refuses to speak, you can get Omnipage to voice the result. After pressing caps lock plus S (twice) to turn NVDA speech off:

• turn on Omnipage's speech mode by pressing F5 or alt plus t then s.
• press ctrl plus end to hear the result spoken.
• you can interrupt or stop Omnipage speech by pressing F.
• after it finishes, turn NVDA speech back on with caps lock plus S.

Hi.

Just wandering what ocr solutions people use.

I use abbyy fine reader and its mostly ok but access wize I have
wandered at it of late.

the latest version will cost me 190 instead of the 300 or so dollars for
a new version and I could easily upgrade it.

Right now omnipage standard costs me 192 nz right now, then again, what
do people use.

I want something that is accessible which will do ocr and scanning,
images, pdfs, paper documents.


Is it worth the upgrade of fine reader or should I switch to omnipage or
what.

Quentin,

 

I use a Canon Flatbed scanner, Canon CanoScan LiDE 120, and the Canon software itself traps the scanned image as Jason describes here. That image file appears to be perfect, according to those who receive it from me as an image .PDF. On those occasions when I need access to the image file myself, I save it and open it with abbyyy Finereader which then converts it to whatever readable format I need.

 

 

All the best,

 

Cearbhall

 

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Jason White via Groups.Io
Sent: Friday, January 10, 2020 12:16 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] OCR

 

ABBYY will work with a hardware scanner as well. Alternatively, you could scan the pages to images in a PDF file before running the OCR process. Actually, some scanners generate PDF output directly, saving the file to a USB drive or sending it to you via email. However, so far as I know, none of these devices is likely to be very accessible. In my work environment, they are the modern alternative to photocopiers – someone can just process a series of pages and receive a PDF via email directly from the device.

 

From: <nvda@nvda.groups.io> on behalf of Quentin Christensen <quentin@...>
Reply-To: <nvda@nvda.groups.io>
Date: Wednesday, January 8, 2020 at 20:40
To: <nvda@nvda.groups.io>
Subject: Re: [nvda] OCR

 

I was more thinking of OCR to use with a hardware scanner.  Sorry, I didn't expand on that thought originally :)

 

On Thu, Jan 9, 2020 at 11:25 AM Jason White via Groups.Io <jason=jasonjgw.net@groups.io> wrote:

ABBYY was updated last year. I haven’t yet purchased the upgrade, so can’t comment on the latest version. It handles document formatting well, including headings and footnotes from scanned images of journal articles.

 

From: <nvda@nvda.groups.io> on behalf of "Kerryn Gunness via Groups.Io" <k_gunness=yahoo.ca@groups.io>
Reply-To: <nvda@nvda.groups.io>
Date: Wednesday, January 8, 2020 at 18:48
To: <nvda@nvda.groups.io>
Subject: Re: [nvda] OCR

 

i use abby

 

----- Original Message -----

From: Quentin Christensen

To: nvda@nvda.groups.io

Sent: Wednesday, January 8, 2020 7:19 PM

Subject: [nvda] OCR

 

Good morning,

 

Has anyone compared OCR software lately?   I had someone ask about Omnipage 20.  I know a few people use Abbyy Finereader, but I wasn't sure how they compare or what other options are out there currently.

 

Kind regards

 

Quentin.

 

--

Quentin Christensen
Training and Support Manager

 

Web: www.nvaccess.org 

Training: https://www.nvaccess.org/shop/

Certification: https://certification.nvaccess.org/

User group: https://nvda.groups.io/g/nvda

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess

 

--

Quentin Christensen
Training and Support Manager

 

Web: www.nvaccess.org 

Training: https://www.nvaccess.org/shop/

Certification: https://certification.nvaccess.org/

User group: https://nvda.groups.io/g/nvda

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess

I just purchased mine and no matter what I do if I press NVDA+ctrl+the arrow keys the changes do not take affect. If I press NVDA+ctrl+v and make changes they are not taking affect. Only when I open Sappi5 eloquence. On Code factory’s page I don’t recall seeing a choice between Sappi5 and NVDA. Only   eloquence for windows.

******

character is found in how you treat people who cannot do anything for you!                                                                       

Uh, no you don't. I can make those changes from the synth settings ring

or the menus just fine. You've been able to do that since I bought it,

and I think I'm up to version 1.6.6 or something. Unless they made a new

version and broke something in the last month or so, you should be able

to change settings without opening Eloquence. I only open mine if I need

to deactivate before a major Windows update, and reactivate afterwards.

On 1/10/2020 0:16, Robert Doc Wright godfearer wrote:

> 

> What I am noticing is that with the Sappi voice you lose the ability

> to change speed, volume, pitch and rate. You have to open Eloquence to

> make those  changes.

> 

> ******

> 

> character is found in how you treat people who cannot do anything for

> you!

> 

> *From: *coccinelle@... <mailto:coccinelle@...>

> *Sent: *Thursday, January 9, 2020 5:27 PM

> *To: *nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>

> *Subject: *Re: [nvda] Purchasing Eloquence

> 

> Is there a difference between the NVDA and the SAPI voices?

> 

> Thanks

> 

> Blessings

> 

> Pascal

> 

> *From:* nvda@nvda.groups.io <nvda@nvda.groups.io> *On Behalf Of *Shaun

> Everiss

> *Sent:* Thursday, January 9, 2020 4:56 PM

> *To:* nvda@nvda.groups.io

> *Subject:* Re: [nvda] Purchasing Eloquence

> 

> atguys.com has both the nvda and sapi versions.

> 

> Their support is good.

> 

> On 10/01/2020 10:51 am, Dan Kerstetter wrote:

> 

>     Hello all.

> 

>     Where is the best place from which to purchase the Eloquence

>     speech synthesizer?  I’ve been to the code factory site;

>     downloaded eloquence from their app store, but don’t know how to

>     register/purchase it.

> 

>     Any help, info or suggestions would be greatly appreciated.

> 

>     Thanks in advance.

> 

>     For an hour of good alternative and classic rock tune in to my

>     show:  A Little Bit of This and a Little Bit of That  Monday at

>     5:00 eastern and Tuesday and Friday 8:00 eastern on out of sight

>     radio.

> 

>     http://www.out-of-sight.net/radio

> 

>

Uh, no you don't. I can make those changes from the synth settings ring

or the menus just fine. You've been able to do that since I bought it,

and I think I'm up to version 1.6.6 or something. Unless they made a new

version and broke something in the last month or so, you should be able

to change settings without opening Eloquence. I only open mine if I need

to deactivate before a major Windows update, and reactivate afterwards.

On 1/10/2020 0:16, Robert Doc Wright godfearer wrote:

> 

> What I am noticing is that with the Sappi voice you lose the ability

> to change speed, volume, pitch and rate. You have to open Eloquence to

> make those  changes.

> 

> ******

> 

> character is found in how you treat people who cannot do anything for

> you!

> 

> *From: *coccinelle@... <mailto:coccinelle@...>

> *Sent: *Thursday, January 9, 2020 5:27 PM

> *To: *nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>

> *Subject: *Re: [nvda] Purchasing Eloquence

> 

> Is there a difference between the NVDA and the SAPI voices?

> 

> Thanks

> 

> Blessings

> 

> Pascal

> 

> *From:* nvda@nvda.groups.io <nvda@nvda.groups.io> *On Behalf Of *Shaun

> Everiss

> *Sent:* Thursday, January 9, 2020 4:56 PM

> *To:* nvda@nvda.groups.io

> *Subject:* Re: [nvda] Purchasing Eloquence

> 

> atguys.com has both the nvda and sapi versions.

> 

> Their support is good.

> 

> On 10/01/2020 10:51 am, Dan Kerstetter wrote:

> 

>     Hello all.

> 

>     Where is the best place from which to purchase the Eloquence

>     speech synthesizer?  I’ve been to the code factory site;

>     downloaded eloquence from their app store, but don’t know how to

>     register/purchase it.

> 

>     Any help, info or suggestions would be greatly appreciated.

> 

>     Thanks in advance.

> 

>     For an hour of good alternative and classic rock tune in to my

>     show:  A Little Bit of This and a Little Bit of That  Monday at

>     5:00 eastern and Tuesday and Friday 8:00 eastern on out of sight

>     radio.

> 

>     http://www.out-of-sight.net/radio

> 

>

ABBYY will work with a hardware scanner as well. Alternatively, you could scan the pages to images in a PDF file before running the OCR process. Actually, some scanners generate PDF output directly, saving the file to a USB drive or sending it to you via email. However, so far as I know, none of these devices is likely to be very accessible. In my work environment, they are the modern alternative to photocopiers – someone can just process a series of pages and receive a PDF via email directly from the device.

--