Date   

Re: NVDA adding and changing settings

Gene
 

You can't ever assume anything when you issue a command without feedback.  I issue commands, now and then and, even though I issue them correctly, I have to issue them again.  But there is a way to check very easily.  Close the document or the program and see if you are asked if you want to save the changes.
 
And we are discussing what happens in terms of no feedback when you save an already saved document.  We don't know if the person is discussing that or discussing the lack of a save as dialog the first time a document is saved.
 
Gene

----- Original Message -----
Sent: Thursday, November 07, 2019 9:44 AM
Subject: Re: [nvda] NVDA adding and changing settings

I never ever hear document saved, never have ever since I started learning how to use doss in 1994 or so. But yeah control s and if you hear nothing you can assume the document has ben saved.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.

to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here

On 7 Nov 2019, at 3:56, Chris Mullins wrote:

Hi

I have been using screen readers for years, though not WindowEyes, and cannot remember a time when i relied on a “document saved” message appearing.  When editing a document in Word or Notepad, Control+s is the shortcut to save your document without exiting from it.  Using this shortcut implies that you want to save your document contents at that point. If you then use alt+f4 to close the document, it will close. 

If your document contains unsaved changes and you try to close it using Alt+f4, you will get a message asking if you want to save the document or not  .  At this point you have 3 choices:

you can press the ‘Save’ button – saves the document and closes it  

You can press the ‘don’t Save’ button – Closes the document without saving it. **

You can press the ‘Cancel’ button – returns focus to the document which remains open.

 

** Word contains options to auto-save a document at timed intervals whilst editing.  If this feature is active, when choosing not to save, you may get a further choice to disregard all changes or only those made since a particular auto-save point.

 

So, in a nutshell, if you want to be asked if you want to save or not, don’t bother with Control+s, just press alt+f4.   If there are unsaved changes you will get the Save/Don’t Save dialog, if you haven’t changed anything the document will close.

 

Cheers

Chris

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Grant Metcalf
Sent: 7 November 2019 07:06
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA adding and changing settings

 

Hi Arlene,

Using Notepad in Win7 the control-s command saves my document. What I do not hear in NVDA is the question “do you want to save the document” and the statement “document saved.”

I use Window-Eyes and it tells me what I want and like to hear! I was doing some editing earlier this evening using NVDA and found other differences on the QBraille display I use. If and when it becomes necessary to only use NVDA it will take some getting used to on my Win10 PC since it does not use Window-Eyes. There are days when Grandpa DOS wishes he could go back to DOS again!

Thanks for your reply.

Listening for His shout!

Grant


Re: NVDA announcing new opened windows

Sarah k Alawami
 

I personally just wait until the new window gains focus. A sound would be nice, but for me not necessary. Is the window not gaining focus for you?

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.

to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here

On 7 Nov 2019, at 8:22, Janet Brandly wrote:

Hello all,

 

Is there an NVDA setting which will have NVDA make a sound when a new window is opened? For example, it would be helpful if, when launching Firefox,  NVDA would make a sound when the window is open. Right now, I wait a few seconds and alt-tab around to see if a new window has opened. Window-Eyes used to do this and it was a great feature.

 

Thanks,

 

Janet


NVDA announcing new opened windows

Janet Brandly
 

Hello all,

 

Is there an NVDA setting which will have NVDA make a sound when a new window is opened? For example, it would be helpful if, when launching Firefox,  NVDA would make a sound when the window is open. Right now, I wait a few seconds and alt-tab around to see if a new window has opened. Window-Eyes used to do this and it was a great feature.

 

Thanks,

 

Janet


Re: Accessible twitter clients?

Giles Turnbull
 

I've been using TWBlue for quite a while but before I did I used Easy Chirp,a website Twitter page which was very easy to use ... though not all actions were in obvious places! It still exists at https://www.easychirp.com/

Giles


Re: NVDA adding and changing settings

Gene
 

It sounds as though NVDA isn't reading the save as dialog when the file has never been saved before.  If the file has been saved before, there is no save as dialog.  The new version of the file is saved.  If it isn't, because the control s command didn't work for some reason, when you try to close the program, you will be asked if you want to save the changes, so you will know if you need to save the message.  but the save as dialog should be read when it appears when you first save the document.
 
Gene

----- Original Message -----
Sent: Thursday, November 07, 2019 5:56 AM
Subject: Re: [nvda] NVDA adding and changing settings

Hi

I have been using screen readers for years, though not WindowEyes, and cannot remember a time when i relied on a “document saved” message appearing.  When editing a document in Word or Notepad, Control+s is the shortcut to save your document without exiting from it.  Using this shortcut implies that you want to save your document contents at that point. If you then use alt+f4 to close the document, it will close. 

If your document contains unsaved changes and you try to close it using Alt+f4, you will get a message asking if you want to save the document or not  .  At this point you have 3 choices:

you can press the ‘Save’ button – saves the document and closes it  

You can press the ‘don’t Save’ button – Closes the document without saving it. **

You can press the ‘Cancel’ button – returns focus to the document which remains open.

 

** Word contains options to auto-save a document at timed intervals whilst editing.  If this feature is active, when choosing not to save, you may get a further choice to disregard all changes or only those made since a particular auto-save point.

 

So, in a nutshell, if you want to be asked if you want to save or not, don’t bother with Control+s, just press alt+f4.   If there are unsaved changes you will get the Save/Don’t Save dialog, if you haven’t changed anything the document will close.

 

Cheers

Chris

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Grant Metcalf
Sent: 7 November 2019 07:06
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA adding and changing settings

 

Hi Arlene,

Using Notepad in Win7 the control-s command saves my document. What I do not hear in NVDA is the question “do you want to save the document” and the statement “document saved.”

I use Window-Eyes and it tells me what I want and like to hear! I was doing some editing earlier this evening using NVDA and found other differences on the QBraille display I use. If and when it becomes necessary to only use NVDA it will take some getting used to on my Win10 PC since it does not use Window-Eyes. There are days when Grandpa DOS wishes he could go back to DOS again!

Thanks for your reply.

Listening for His shout!

Grant


Re: NVDA adding and changing settings

Sarah k Alawami
 

I never ever hear document saved, never have ever since I started learning how to use doss in 1994 or so. But yeah control s and if you hear nothing you can assume the document has ben saved.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.

to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here

On 7 Nov 2019, at 3:56, Chris Mullins wrote:

Hi

I have been using screen readers for years, though not WindowEyes, and cannot remember a time when i relied on a “document saved” message appearing.  When editing a document in Word or Notepad, Control+s is the shortcut to save your document without exiting from it.  Using this shortcut implies that you want to save your document contents at that point. If you then use alt+f4 to close the document, it will close. 

If your document contains unsaved changes and you try to close it using Alt+f4, you will get a message asking if you want to save the document or not  .  At this point you have 3 choices:

you can press the ‘Save’ button – saves the document and closes it  

You can press the ‘don’t Save’ button – Closes the document without saving it. **

You can press the ‘Cancel’ button – returns focus to the document which remains open.

 

** Word contains options to auto-save a document at timed intervals whilst editing.  If this feature is active, when choosing not to save, you may get a further choice to disregard all changes or only those made since a particular auto-save point.

 

So, in a nutshell, if you want to be asked if you want to save or not, don’t bother with Control+s, just press alt+f4.   If there are unsaved changes you will get the Save/Don’t Save dialog, if you haven’t changed anything the document will close.

 

Cheers

Chris

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Grant Metcalf
Sent: 7 November 2019 07:06
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA adding and changing settings

 

Hi Arlene,

Using Notepad in Win7 the control-s command saves my document. What I do not hear in NVDA is the question “do you want to save the document” and the statement “document saved.”

I use Window-Eyes and it tells me what I want and like to hear! I was doing some editing earlier this evening using NVDA and found other differences on the QBraille display I use. If and when it becomes necessary to only use NVDA it will take some getting used to on my Win10 PC since it does not use Window-Eyes. There are days when Grandpa DOS wishes he could go back to DOS again!

Thanks for your reply.

Listening for His shout!

Grant


Re: NVDA and ccleaner

Davy Cuppens
 

Clleaner is almost fully unaccessible; nvda or another screenreader cannot do anything about it. It is their choice not to be accessible.

-----Oorspronkelijk bericht-----
From: Don H
Sent: Thursday, November 07, 2019 12:24 AM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA and ccleaner

downloaded and install the latest free version of ccleaner. I selected
the registry option and did a scan. It found several items but I can
not get NVDA to read the list of what it found.
Running Win 10 1903 and NVDA 2019.2.1
Thanks


Re: NVDA adding and changing settings

Chris Mullins
 

Hi

I have been using screen readers for years, though not WindowEyes, and cannot remember a time when i relied on a “document saved” message appearing.  When editing a document in Word or Notepad, Control+s is the shortcut to save your document without exiting from it.  Using this shortcut implies that you want to save your document contents at that point. If you then use alt+f4 to close the document, it will close. 

If your document contains unsaved changes and you try to close it using Alt+f4, you will get a message asking if you want to save the document or not  .  At this point you have 3 choices:

you can press the ‘Save’ button – saves the document and closes it  

You can press the ‘don’t Save’ button – Closes the document without saving it. **

You can press the ‘Cancel’ button – returns focus to the document which remains open.

 

** Word contains options to auto-save a document at timed intervals whilst editing.  If this feature is active, when choosing not to save, you may get a further choice to disregard all changes or only those made since a particular auto-save point.

 

So, in a nutshell, if you want to be asked if you want to save or not, don’t bother with Control+s, just press alt+f4.   If there are unsaved changes you will get the Save/Don’t Save dialog, if you haven’t changed anything the document will close.

 

Cheers

Chris

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Grant Metcalf
Sent: 7 November 2019 07:06
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA adding and changing settings

 

Hi Arlene,

Using Notepad in Win7 the control-s command saves my document. What I do not hear in NVDA is the question “do you want to save the document” and the statement “document saved.”

I use Window-Eyes and it tells me what I want and like to hear! I was doing some editing earlier this evening using NVDA and found other differences on the QBraille display I use. If and when it becomes necessary to only use NVDA it will take some getting used to on my Win10 PC since it does not use Window-Eyes. There are days when Grandpa DOS wishes he could go back to DOS again!

Thanks for your reply.

Listening for His shout!

Grant


Re: Urgent help needed NVDA was not able to loa Microsoft SAPI 5

Mr. Wong Chi Wai, William <cwwong.pro@...>
 

Hi,
The error message is
Synthesizer error
Could not load the sapi5 synthesizer.

I have tried:
1. restore NVDA default setting
2. reinstall some SAPI 5tts

And they failed.


Quentin Christensen 於 7/11/2019 15:27 寫道:

I wouldn't immediately jump to reinstalling Windows just yet.

Can you use eSpeak NG?  Also can you give us the exact error you get when you try to load a SAPI 5 synthesizer?  Have you installed, updated or uninstalled anything recently?

The log didn't make it through - they can't be sent to the list, but you can send it to me offlist at info@... if you like.

If it's a language issue, if you open NVDA's general settings (assuming you can still use any of NVDA?) can you set the language to English instead of default?  And if that works, it might be worth checking what your Windows language is set to just in case that has changed.

Regards

Quentin

On Thu, Nov 7, 2019 at 4:56 PM Mr. Wong Chi Wai, William <cwwong.pro@...> wrote:
Hi,

Very annoying to me.

Today I wake up to find that my NVDA suddenly doesn't speak English.


If I try to set Microsoft SAPI 5 as the speach engine, NVDA display
error message that the speech synth was not able to load.

The problem also exist if I try to load RH voice.

For details, I have included in the log file here.

I am very very upset now. Could any one offer me a fix for it. Many thanks.

William







--
Quentin Christensen
Training and Support Manager



Re: NVDA and ccleaner

Brian Tew
 

Try narrator. 


Re: Urgent help needed NVDA was not able to loa Microsoft SAPI 5

Mr. Wong Chi Wai, William <cwwong.pro@...>
 

Well, it is strange that everything work as usual before I turn off my PC last night.

But the problem happen immediately after I turn on my Windows this morning.


zahra 於 7/11/2019 14:22 寫道:

hi,
did you save your nvda settings before the time that the language of
nvda is changed?
if yes, just press nvda+control+r
to reset nvda to the previous settings.

On 11/7/19, Mr. Wong Chi Wai, William <cwwong.pro@gmail.com> wrote:
Hi,

Very annoying to me.

Today I wake up to find that my NVDA suddenly doesn't speak English.


If I try to set Microsoft SAPI 5 as the speach engine, NVDA display
error message that the speech synth was not able to load.

The problem also exist if I try to load RH voice.

For details, I have included in the log file here.

I am very very upset now. Could any one offer me a fix for it. Many thanks.

William






Re: Urgent help needed NVDA was not able to loa Microsoft SAPI 5

Gene
 

There is no relation between a registry cleaner and the NVDA utility.  Its purpose is very specific.  At times, doing something like uninstalling Microsoft office unregisters some entries that shouldn't be unregistered.  That makes NVDA unable to do a number of things that are necessary, such as work properly with many browsers.  All the registry tool does is reregister entries that are already in the registry that the uninstallation improperly unregistered.  It doesn't clean or remove anything.
 
Gene

----- Original Message -----
Sent: Thursday, November 07, 2019 3:23 AM
Subject: Re: [nvda] Urgent help needed NVDA was not able to loa Microsoft SAPI 5

It seems to me there is a bit of a knee jerk response to this.

If changing register should not be done why does nvda have a com register tool itself.

If you are going to use any software to clean register first manually back up your own registry

You can then restore it if all goes wrong.

I would first create a new user account with admin ability and test nvda in this situation, possible corrupted user profile.

If things are still not right try the nvda tools com reg tool.

I hope this mght help.

 

Sent from Mail for Windows 10

 


From: nvda@nvda.groups.io <nvda@nvda.groups.io> on behalf of Gene <gsasner@...>
Sent: Thursday, November 7, 2019 7:52:13 AM
To: nvda@nvda.groups.io <nvda@nvda.groups.io>
Subject: Re: [nvda] Urgent help needed NVDA was not able to loa Microsoft SAPI 5
 
Instead of suggesting the most complex and dire explanation and solution as the thing to do, how about trying a system restore if a point is available before the problem began.  Others may have other solutions and it might be a good idea to wait before trying anything but that is one thing to try. 
 
Gene
----- Original Message -----
Sent: Thursday, November 07, 2019 1:15 AM
Subject: Re: [nvda] Urgent help needed NVDA was not able to loa Microsoft SAPI 5

Weird.

Looks like a corrupted windows install.

Reinstall windows, run malware scans etc.

Updating sound drivers maybe to.

Of course it happened suddenly, that would suggest some sort of hardware
issue.

I had all sorts of issues with a business server because of a dead
wireless adaptor.



On 7/11/2019 6:56 pm, Mr. Wong Chi Wai, William wrote:
> Hi,
>
> Very annoying to me.
>
> Today I wake up to find that my NVDA suddenly doesn't speak English.
>
>
> If I try to set Microsoft SAPI 5 as the speach engine, NVDA display
> error message that the speech synth was not able to load.
>
> The problem also exist if I try to load RH voice.
>
> For details, I have included in the log file here.
>
> I am very very upset now. Could any one offer me a fix for it. Many
> thanks.
>
> William
>
>
>
>
>



Re: Urgent help needed NVDA was not able to loa Microsoft SAPI 5

ADRIAN POCOCK
 

It seems to me there is a bit of a knee jerk response to this.

If changing register should not be done why does nvda have a com register tool itself.

If you are going to use any software to clean register first manually back up your own registry

You can then restore it if all goes wrong.

I would first create a new user account with admin ability and test nvda in this situation, possible corrupted user profile.

If things are still not right try the nvda tools com reg tool.

I hope this mght help.

 

Sent from Mail for Windows 10

 


From: nvda@nvda.groups.io <nvda@nvda.groups.io> on behalf of Gene <gsasner@...>
Sent: Thursday, November 7, 2019 7:52:13 AM
To: nvda@nvda.groups.io <nvda@nvda.groups.io>
Subject: Re: [nvda] Urgent help needed NVDA was not able to loa Microsoft SAPI 5
 
Instead of suggesting the most complex and dire explanation and solution as the thing to do, how about trying a system restore if a point is available before the problem began.  Others may have other solutions and it might be a good idea to wait before trying anything but that is one thing to try. 
 
Gene
----- Original Message -----
Sent: Thursday, November 07, 2019 1:15 AM
Subject: Re: [nvda] Urgent help needed NVDA was not able to loa Microsoft SAPI 5

Weird.

Looks like a corrupted windows install.

Reinstall windows, run malware scans etc.

Updating sound drivers maybe to.

Of course it happened suddenly, that would suggest some sort of hardware
issue.

I had all sorts of issues with a business server because of a dead
wireless adaptor.



On 7/11/2019 6:56 pm, Mr. Wong Chi Wai, William wrote:
> Hi,
>
> Very annoying to me.
>
> Today I wake up to find that my NVDA suddenly doesn't speak English.
>
>
> If I try to set Microsoft SAPI 5 as the speach engine, NVDA display
> error message that the speech synth was not able to load.
>
> The problem also exist if I try to load RH voice.
>
> For details, I have included in the log file here.
>
> I am very very upset now. Could any one offer me a fix for it. Many
> thanks.
>
> William
>
>
>
>
>



Re: Urgent help needed NVDA was not able to loa Microsoft SAPI 5

Gene
 

Instead of suggesting the most complex and dire explanation and solution as the thing to do, how about trying a system restore if a point is available before the problem began.  Others may have other solutions and it might be a good idea to wait before trying anything but that is one thing to try. 
 
Gene

----- Original Message -----
Sent: Thursday, November 07, 2019 1:15 AM
Subject: Re: [nvda] Urgent help needed NVDA was not able to loa Microsoft SAPI 5

Weird.

Looks like a corrupted windows install.

Reinstall windows, run malware scans etc.

Updating sound drivers maybe to.

Of course it happened suddenly, that would suggest some sort of hardware
issue.

I had all sorts of issues with a business server because of a dead
wireless adaptor.



On 7/11/2019 6:56 pm, Mr. Wong Chi Wai, William wrote:
> Hi,
>
> Very annoying to me.
>
> Today I wake up to find that my NVDA suddenly doesn't speak English.
>
>
> If I try to set Microsoft SAPI 5 as the speach engine, NVDA display
> error message that the speech synth was not able to load.
>
> The problem also exist if I try to load RH voice.
>
> For details, I have included in the log file here.
>
> I am very very upset now. Could any one offer me a fix for it. Many
> thanks.
>
> William
>
>
>
>
>



Re: Urgent help needed NVDA was not able to loa Microsoft SAPI 5

Quentin Christensen
 

I wouldn't immediately jump to reinstalling Windows just yet.

Can you use eSpeak NG?  Also can you give us the exact error you get when you try to load a SAPI 5 synthesizer?  Have you installed, updated or uninstalled anything recently?

The log didn't make it through - they can't be sent to the list, but you can send it to me offlist at info@... if you like.

If it's a language issue, if you open NVDA's general settings (assuming you can still use any of NVDA?) can you set the language to English instead of default?  And if that works, it might be worth checking what your Windows language is set to just in case that has changed.

Regards

Quentin

On Thu, Nov 7, 2019 at 4:56 PM Mr. Wong Chi Wai, William <cwwong.pro@...> wrote:
Hi,

Very annoying to me.

Today I wake up to find that my NVDA suddenly doesn't speak English.


If I try to set Microsoft SAPI 5 as the speach engine, NVDA display
error message that the speech synth was not able to load.

The problem also exist if I try to load RH voice.

For details, I have included in the log file here.

I am very very upset now. Could any one offer me a fix for it. Many thanks.

William







--
Quentin Christensen
Training and Support Manager


Re: Urgent help needed NVDA was not able to loa Microsoft SAPI 5

 

Weird.

Looks like a corrupted windows install.

Reinstall windows, run malware scans etc.

Updating sound drivers maybe to.

Of course it happened suddenly, that would suggest some sort of hardware issue.

I had all sorts of issues with a business server because of a dead wireless adaptor.

On 7/11/2019 6:56 pm, Mr. Wong Chi Wai, William wrote:
Hi,

Very annoying to me.

Today I wake up to find that my NVDA suddenly doesn't speak English.


If I try to set Microsoft SAPI 5 as the speach engine, NVDA display error message that the speech synth was not able to load.

The problem also exist if I try to load RH voice.

For details, I have included in the log file here.

I am very very upset now. Could any one offer me a fix for it. Many thanks.

William




Re: NVDA adding and changing settings

Grant Metcalf
 

Hi Arlene,
Using Notepad in Win7 the control-s command saves my document. What I do not hear in NVDA is the question “do you want to save the document” and the statement “document saved.”
I use Window-Eyes and it tells me what I want and like to hear! I was doing some editing earlier this evening using NVDA and found other differences on the QBraille display I use. If and when it becomes necessary to only use NVDA it will take some getting used to on my Win10 PC since it does not use Window-Eyes. There are days when Grandpa DOS wishes he could go back to DOS again!
Thanks for your reply.
Listening for His shout!
Grant


Re: Using Surface Pro with touchscreen only?

Denis Sariyannis
 

Thanks for all your answers.
Does anyone know how I can navigate through a list view? If I do it with narrator or NVDA I always navigate through columns but not through lines. it is very annoying when using Windows Explorer. I guess there must be a build in solution to do this. Otherwise I'm going to create a gesture for it.

Von meinem iPhone gesendet

Am 06.11.2019 um 23:27 schrieb Quentin Christensen <quentin@...>:


I think the main issue might be that not as many touch gestures are pre-setup, however you can setup any gestures you like using NVDA's Input Gestures feature, particularly as the newer hardware running the latest Windows 10 might be able to distinguish different gestures.

I think if you can input a gesture that Narrator recognises, NVDA should be able to recognise it also - it might just be that we haven't set anything to activate to that gesture by default.

That is probably the main thing I would say - even if we defined more gestures by default, it would still be hard to try to come close to the number of commands you can give NVDA via the keyboard - certainly not as logically.  But that will be the same for any screen reader on any platform.

On Thu, Nov 7, 2019 at 8:57 AM Kevin Cussick via Groups.Io <the.big.white.shepherd=googlemail.com@groups.io> wrote:
Hi,   well,   for me I had the same problems You face I just don't think
Nvda is up to the job using the touch screen. nothing near  as good as
Narrator.

On 06/11/2019 10:20, Denis Sariyannis wrote:
> Hi all,
> I just got my new Surface Pro 7 which runs Windows 10 with NVDA as my
> primary screenreader.
> Of course I use the device as a notebook and it works very well. NVDA is
> extremely responsive, too.
> Now I wonder if it would make sense to learn about its touchscreen and
> to run it also in tablet mode. From what I've seen so far it seems to be
> quite complicated for example to navigate through a list of files in
> Windows Explorer or to work with menus.
> Furthermore NVDA regularly doesn't recognize gestures correctly.
> Flicking left and right with two fingers often gets interpreted as a
> single finger flick etc. The iPad seems to be much more precise when
> doing that.
> Does it make sense to keep trying and maybe even turning on Narrator
> instead when using it without a keyboard or is it not really usable
> productively?
> Maybe you could give me some hints and tell about your experiences?
> Thank you!
>
> Regards
> Denis
>
>
> --
> Denis Sariyannis
> Mail: denis.sariyannis@... <mailto:denis.sariyannis@...>
> Phone: +49 6227 6982766
> Mobile: +49 176 66830900
>





--
Quentin Christensen
Training and Support Manager


Re: Urgent help needed NVDA was not able to loa Microsoft SAPI 5

 

hi,
did you save your nvda settings before the time that the language of
nvda is changed?
if yes, just press nvda+control+r
to reset nvda to the previous settings.

On 11/7/19, Mr. Wong Chi Wai, William <cwwong.pro@gmail.com> wrote:
Hi,

Very annoying to me.

Today I wake up to find that my NVDA suddenly doesn't speak English.


If I try to set Microsoft SAPI 5 as the speach engine, NVDA display
error message that the speech synth was not able to load.

The problem also exist if I try to load RH voice.

For details, I have included in the log file here.

I am very very upset now. Could any one offer me a fix for it. Many thanks.

William





--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali


Re: NVDA adding and changing settings

Arlene
 

Grant! In my win 7 box, I had outlook 2010. I used NVDA for when I had to write a document in word. When I went to save it. NVDA did not ask you if you want to save the document. I can’t remember how I did it using it. I had to close NVDA down and get Jaws up. I had to save the document using jaws cause Jaws does ask you if you want to save your document. I told it yes. I don’t have word now that I have win ten. If I did. I’d retest NVDA and try to save a document using NVDA. I’d try to find how one does it.

 

Sent from Mail for Windows 10

 

From: Grant Metcalf
Sent: November 6, 2019 7:33 PM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA adding and changing settings

 

When saving a document NVDA does not say "Document saved."  How does one add

this save command to NVDA to be read when a document is saved? I prefer not

to have to scroll around the screen to find this information. Also, if there

are other Windows commands that can be added I would appreciate knowing how

to add them as well.

Gratefully yours.

Listening for His shout!

Grant Metcalf - A.K.A. Grandpa DOS

Email: the.gems@...

Home: (650) 589-6890

Cell: (650) 278-3084

Website: http://bartimaeus.us/

 

 

 

 

14361 - 14380 of 81010