Date   
Re: wanted free voices

hurrikennyandopo ...
 

Hi


If you installed all of the voices and only wanted to keep the english ones the other voices can be uninstalled from program and features i think it is called in the control panel. You will need to go down the list and uninstall the voices you do not want.


If you want the english ones only  you will need to note which ones they are.


Under the voice settings menu to get there press the ctrl key + nvda key + the letter V it should tell you what synth package you are using there. Tab down to change and change to speech platform.


When you have changed it then after that you can tab to voices then arrow down or up the list to see which ones they are.


I do not play with the languages as i only speak english and only use english voices.


I think also there is a add on called switch synth you can get from the add on web page that some use but not me.


Gene nz

 

On 19/04/2019 12:04 AM, sazid wrote:
Thank you i had installed it/  can you please tell me which are
english voices and how to uninstall the unwanted voices?  is there any
addon which can switch from one synth to other like telugu language is
supports by e speak then how can i switch automatically?

thanks and regards,
sazid

On 4/15/19, hurrikennyandopo ... <hurrikennyandopo@...> wrote:
Hi


the link to the drop box where you can get the speech platform synth and
voices is
https://www.dropbox.com/s/0rokrf6a4qijsvf/Speech%20Platform%2011%20engine%20and%20voices.zip?dl=0

The speech hub package is only in english all of the synth and voices. You
will need to install the add on as well for nvda to see the package after
the main file has been installed.


the add on can be found under c: drive then program files x86 then speech
hub then i think it is the add on it is the top folder called add on. it
will need to be installed the usual way for nvda to see the package.


The link to this one from drop box is
https://www.dropbox.com/s/28lcflys6ebbmtk/SpeechHubInstall.exe?dl=0


I think the following website if i remember right you can get free TTS
voices as well. if i remember right you do not have to buy the package as
the synths and voices which are free can be installed. I thin there are
commercial ones but you have to buy them. I thought i had lost this link a
long time ago.


The link to this page is
http://www.zero2000.com/free-text-to-speech-natural-voices.html


Gene nz


On 15/04/2019 1:30 AM, zahra wrote:

hi gene.
speak hub does not support windows xp.
and mary tts i believe is not in english. am i right?
previously, i remember someone post the link for one free tts. can you
please send it again for me to test?

On 4/8/19, hurrikennyandopo ...
<hurrikennyandopo@...><mailto:hurrikennyandopo@...> wrote:


Hi v


Not sure if any of the voices in the speech platform package will suit your
needs. there are voices for both english and other languages that i do not
speak


I can drop box them for you they are about 340 meg with all voices and the
speech platform runtime engine.


You will need a program like 7 zip or one that can unzip the files for you
first. When done look for the speech platform runtime engine and install it
first. It is the only file that does not have the name of the file with TTS
in in standing for text to speech and the name of the voice and language.


You can get it from my drop box account at
https://www.dropbox.com/s/0rokrf6a4qijsvf/Speech%20Platform%2011%20engine%20and%20voices.zip?dl=0


The speech hub package also has other synths and voices but in a package
and
can be gotten off the following website at http://www.speakon.org.uk/

When you download the speech hub package you will also need to install the
add on so nvda can see the synths and voices. So the main package will get
installed then under your c: drive program files x86 then speech hub then
the folder for the add on it will need to be installed into nvda. Then
later
on you can change to those other synth and voices.


There may be other software there that you may like to try.


Gene nz



On 7/04/2019 7:47 PM, sazid wrote:

Hello family,
hope all are doing great.  I am using windows 7 on my PC with e speak
as my voice synthasizer can anyone provide me free voice for my nvda?

thanks and regards,
sazid





--
[Image NVDA          certified expert]
Check out my website for NVDA tutorials and other blindness related
material
at http://www.accessibilitycentral.net

Regardless of where you are in New Zealand if you are near one of the APNK
sites you can use a copy of the NVDA screen reader on one of their
computers. To find out which location (or locations) are nearest to you
please visit
http://www.aotearoapeoplesnetwork.org/content/partner-libraries
(Aotearoa People's Network Kaharoa). To find out which software is
installed
on the APNK network please visit the following link
http://www.aotearoapeoplesnetwork.info/faq/software To find out how to use
NVDA on APNK computers please visit the following link
http://www.aotearoapeoplesnetwork.info/faq/nvda

To find out which software is available on the Christchurch City Library
network, and how to start the NVDA screen reader, please go to the
following
links. Software available
https://my.christchurchcitylibraries.com/faq/computers/#faq_5884  How to
start the NVDA screen reader on Christchurch City Library computers
https://my.christchurchcitylibraries.com/faqs/what-screen-reader-software-is-available/

To find an NVDA certified expert near you, please visit the following link
https://certification.nvaccess.org/. The certification page contains the
official list of NVDA certified individuals from around the world, who have
sat and successfully passed the NVDA expert exam.











--
[Image NVDA          certified expert]
Check out my website for NVDA tutorials and other blindness related material
at http://www.accessibilitycentral.net

Regardless of where you are in New Zealand if you are near one of the APNK
sites you can use a copy of the NVDA screen reader on one of their
computers. To find out which location (or locations) are nearest to you
please visit http://www.aotearoapeoplesnetwork.org/content/partner-libraries
(Aotearoa People's Network Kaharoa). To find out which software is installed
on the APNK network please visit the following link
http://www.aotearoapeoplesnetwork.info/faq/software To find out how to use
NVDA on APNK computers please visit the following link
http://www.aotearoapeoplesnetwork.info/faq/nvda

To find out which software is available on the Christchurch City Library
network, and how to start the NVDA screen reader, please go to the following
links. Software available
https://my.christchurchcitylibraries.com/faq/computers/#faq_5884  How to
start the NVDA screen reader on Christchurch City Library computers
https://my.christchurchcitylibraries.com/faqs/what-screen-reader-software-is-available/

To find an NVDA certified expert near you, please visit the following link
https://certification.nvaccess.org/. The certification page contains the
official list of NVDA certified individuals from around the world, who have
sat and successfully passed the NVDA expert exam.







--
Check out my website for NVDA tutorials and other blindness related material at http://www.accessibilitycentral.net
 
Regardless of where you are in New Zealand if you are near one of the APNK sites you can use a copy of the NVDA screen reader on one of their computers. To find out which location (or locations) are nearest to you please visit http://www.aotearoapeoplesnetwork.org/content/partner-libraries (Aotearoa People's Network Kaharoa).
To find out which software is installed on the APNK network please visit the following link http://www.aotearoapeoplesnetwork.info/faq/software To find out how to use NVDA on APNK computers please visit the following link http://www.aotearoapeoplesnetwork.info/faq/nvda
 

To find out which software is available on the Christchurch City Library network, and how to start the NVDA screen reader, please go to the following links. Software available  https://my.christchurchcitylibraries.com/faq/computers/#faq_5884  How to start the NVDA screen reader on Christchurch City Library computers  https://my.christchurchcitylibraries.com/faqs/what-screen-reader-software-is-available/
 
To find an NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.

Re: how to copy text using clip speak?

Robert Doc Wright godfearer
 

Is this clipspeak speaking of the addon? If so here is the information of its use:

 

Clipspeak is an addon that allows NVDA to automatically announce clipboard operations (such as cut, copy and paste), along with other common editing operations such as select all, undo and redo. In order to prevent announcement in inappropriate situations, Clipspeak performs checks on the control and the clipboard in order to make an informed decision as to whether such an announcement is necessary. Because of this, Clipspeak's announcements may be inaccurate. By default, Clipspeak's gestures are mapped to those commonly used by English versions of Windows, I.E.:

• CTRL+A: Select all

• CTRL+Z: Undo

• CTRL+Y: Redo

• CTRL+X: Cut

• CTRL+C: Copy

• CTRL+V: Paste

If these are not the shortcuts commonly used for these tasks on your version of Windows, you will need to remap these gestures in the input gestures configuration under the Clipboard category.

 

                                                                                                                                If all I have left in this world is God, I have everything!                                                                                                                                                                                                                                                                                                                                                Sent from Mail for Windows 10

 

From: Sarah k Alawami
Sent: Thursday, April 18, 2019 3:43 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] how to copy text using clip speak?

 

I don't htik traphics are objects in he way nvda sees them. I don't think you would be able to copy a graphic with nvda. If you can I'd love to be wrong on this.

Sarah Alawami, owner of TFFP. . For more info go to our website.
For stuff we sell, mac training materials and  tutorials go here.
and for hosting options go here
to subscribe to the feed click here

The listen page is found here

Finally, to become a patron and help support the podcast go here

On 18 Apr 2019, at 14:02, Gene wrote:

I was playing with NVDA key numpad 5 and I tried to copy a graphic to the clipboard in the Notepad dialog asking if you want to save the changes.  I couldn't save it.  Are graphics not objects?

 

Gene

----- Original Message -----

Sent: Thursday, April 18, 2019 3:33 PM

Subject: Re: [nvda] how to copy text using clip speak?

 

Yes in some cases using screen navigation when it is reading what you want,
you can do it with nvda/numpad 5 three times, then paste it somewhere and
edit out the bits you don't need.
 Brian

bglists@...
Sent via blueyonder.
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Brian Vogel" <britechguy@...>
To: <nvda@nvda.groups.io>
Sent: Thursday, April 18, 2019 4:16 PM
Subject: Re: [nvda] how to copy text using clip speak?


On Thu, Apr 18, 2019 at 10:58 AM, sazid wrote:

>
> i want to copy a text from a dialogue box so how can i use this?

That is, or can be, a completely different thing, as some dialog boxes are
"uncopyable" by typical means.

See: https://duckduckgo.com/?q=windows+copy+dialog+text

Specifically see the second and third result pages, that discuss using
Textify to get "uncopyable" text from certain dialog boxes.

None of this is in any way connected to ClipSpeak.

--

Brian *-* Windows 10 Pro, 64-Bit, Version 1809, Build 17763

*Growth for the sake of growth is the ideology of the cancer cell.*

~ Edward Abbey





 

Re: Goldwave and latest NVDA update

Robert Doc Wright godfearer
 

I am running the 64bit and when I did the latest NVDA upgrade is when it stopeed  working. There was a new update for GoldWave addon but I still do not get announcement when I press left or right brackets.  The addon version is 19.04.

 

                                                                                                                                If all I have left in this world is God, I have everything!                                                                                                                                                                                                                                                                                                                                                Sent from Mail for Windows 10

 

From: Brian's Mail list account via Groups.Io
Sent: Wednesday, April 17, 2019 2:00 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Goldwave and latest NVDA update

 

Firstly which version of Goldwave and which version of the add on do you

have installed. There was an update to the add on recently, but mine is

still working with all the keys being announced here on the 32 bit version

of Goldwave, the best for my purposes, the  version ends in .65, which is

more stable then 7, which I think was the last one built before going to the

64 bit version. The add on claims to be 19.04

Brian

 

bglists@...

Sent via blueyonder.

Please address personal E-mail to:-

briang1@..., putting 'Brian Gaff'

in the display name field.

----- Original Message -----

From: "Robert Doc Wright godfearer" <godfearer@...>

To: <nvda@nvda.groups.io>

Sent: Wednesday, April 17, 2019 5:55 AM

Subject: [nvda] Goldwave and latest NVDA update

 

 

>I get no announcements when pressing the start or end markers [ ]. All of

>the function keys speak as they should.

> If all I have left in this world is God, I have everything! Sent from Mail

> for Windows 10

>

>

 

 

 

 

Re: how to copy text using clip speak?

Gene
 

I mean I couldn't copy it.
 
Gene

----- Original Message -----
From: Gene
Sent: Thursday, April 18, 2019 4:02 PM
Subject: Re: [nvda] how to copy text using clip speak?

I was playing with NVDA key numpad 5 and I tried to copy a graphic to the clipboard in the Notepad dialog asking if you want to save the changes.  I couldn't save it.  Are graphics not objects?
 
Gene
----- Original Message -----
Sent: Thursday, April 18, 2019 3:33 PM
Subject: Re: [nvda] how to copy text using clip speak?

Yes in some cases using screen navigation when it is reading what you want,
you can do it with nvda/numpad 5 three times, then paste it somewhere and
edit out the bits you don't need.
 Brian

bglists@...
Sent via blueyonder.
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Brian Vogel" <britechguy@...>
To: <nvda@nvda.groups.io>
Sent: Thursday, April 18, 2019 4:16 PM
Subject: Re: [nvda] how to copy text using clip speak?


On Thu, Apr 18, 2019 at 10:58 AM, sazid wrote:

>
> i want to copy a text from a dialogue box so how can i use this?

That is, or can be, a completely different thing, as some dialog boxes are
"uncopyable" by typical means.

See: https://duckduckgo.com/?q=windows+copy+dialog+text

Specifically see the second and third result pages, that discuss using
Textify to get "uncopyable" text from certain dialog boxes.

None of this is in any way connected to ClipSpeak.

--

Brian *-* Windows 10 Pro, 64-Bit, Version 1809, Build 17763

*Growth for the sake of growth is the ideology of the cancer cell.*

~ Edward Abbey






Re: how to copy text using clip speak?

Sarah k Alawami
 

I don't htik traphics are objects in he way nvda sees them. I don't think you would be able to copy a graphic with nvda. If you can I'd love to be wrong on this.

Sarah Alawami, owner of TFFP. . For more info go to our website.
For stuff we sell, mac training materials and  tutorials go here.
and for hosting options go here
to subscribe to the feed click here

The listen page is found here

Finally, to become a patron and help support the podcast go here

On 18 Apr 2019, at 14:02, Gene wrote:

I was playing with NVDA key numpad 5 and I tried to copy a graphic to the clipboard in the Notepad dialog asking if you want to save the changes.  I couldn't save it.  Are graphics not objects?
 
Gene
----- Original Message -----
Sent: Thursday, April 18, 2019 3:33 PM
Subject: Re: [nvda] how to copy text using clip speak?

Yes in some cases using screen navigation when it is reading what you want,
you can do it with nvda/numpad 5 three times, then paste it somewhere and
edit out the bits you don't need.
 Brian

bglists@...
Sent via blueyonder.
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Brian Vogel" <britechguy@...>
To: <nvda@nvda.groups.io>
Sent: Thursday, April 18, 2019 4:16 PM
Subject: Re: [nvda] how to copy text using clip speak?


On Thu, Apr 18, 2019 at 10:58 AM, sazid wrote:

>
> i want to copy a text from a dialogue box so how can i use this?

That is, or can be, a completely different thing, as some dialog boxes are
"uncopyable" by typical means.

See: https://duckduckgo.com/?q=windows+copy+dialog+text

Specifically see the second and third result pages, that discuss using
Textify to get "uncopyable" text from certain dialog boxes.

None of this is in any way connected to ClipSpeak.

--

Brian *-* Windows 10 Pro, 64-Bit, Version 1809, Build 17763

*Growth for the sake of growth is the ideology of the cancer cell.*

~ Edward Abbey






Re: remote add-on not compatible with latest nvda version?

Robert Doc Wright godfearer
 

What is the version of your remote? It should be  2.2.

 

                                                                                                                                If all I have left in this world is God, I have everything!                                                                                                                                                                                                                                                                                                                                                Sent from Mail for Windows 10

 

From: Davy Cuppens
Sent: Wednesday, April 17, 2019 3:40 AM
To: nvda@nvda.groups.io
Subject: [nvda] remote add-on not compatible with latest nvda version?

 

Hi folks

 

The subject says it all.

 

I cannot update the remote add-on and I am using the latest nvda.

 

Is this a known issue?

 

My nvda is a dutch version and I am not sitting behind any firewall that is restricting my rights.

 

Because list traffic is as high here I have not always had the time to read through messages so sorry if this problem was already dealth with.

Davy

 

Re: how to copy text using clip speak?

Gene
 

I was playing with NVDA key numpad 5 and I tried to copy a graphic to the clipboard in the Notepad dialog asking if you want to save the changes.  I couldn't save it.  Are graphics not objects?
 
Gene

----- Original Message -----
Sent: Thursday, April 18, 2019 3:33 PM
Subject: Re: [nvda] how to copy text using clip speak?

Yes in some cases using screen navigation when it is reading what you want,
you can do it with nvda/numpad 5 three times, then paste it somewhere and
edit out the bits you don't need.
 Brian

bglists@...
Sent via blueyonder.
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Brian Vogel" <britechguy@...>
To: <nvda@nvda.groups.io>
Sent: Thursday, April 18, 2019 4:16 PM
Subject: Re: [nvda] how to copy text using clip speak?


On Thu, Apr 18, 2019 at 10:58 AM, sazid wrote:

>
> i want to copy a text from a dialogue box so how can i use this?

That is, or can be, a completely different thing, as some dialog boxes are
"uncopyable" by typical means.

See: https://duckduckgo.com/?q=windows+copy+dialog+text

Specifically see the second and third result pages, that discuss using
Textify to get "uncopyable" text from certain dialog boxes.

None of this is in any way connected to ClipSpeak.

--

Brian *-* Windows 10 Pro, 64-Bit, Version 1809, Build 17763

*Growth for the sake of growth is the ideology of the cancer cell.*

~ Edward Abbey






Re: A very interesting problem: the use of Spyder outside the Anaconda, a few more questions and advice

Pawel Urbanski
 

Hi, I contributed some fixes to VS Code - it is not so chatty now... I
also created a very simple, but useful NVDA add-on for VS Code...

Just download the latest VS Code - would be great if we somehow could
join forces if more fixes would be useful..
My add-on is over here:
https://github.com/pawelurbanski/nvda-for-vs-code

** Do not worry that it says that there were commits to the repository
- just some typo fixes. **

Best regards,
Pawel

On 18/04/2019, Brian Vogel <@britechguy> wrote:
Shasa,

              I'm going to reach out to the contacts I have and ask them to
take a look at this topic and reply to you privately.  There seem to be a
lot of "regulars" who are also Python coders, a number of whom work on NVDA
itself and/or its add-ons.

              That being said, the subject of Python coding at the depth and
breadth that your message indicates you want to pursue makes it off-topic
for the NVDA list.  I won't even suggest you take this to the chat group, as
the scope of the discussion you want to have can only occur among seasoned
Python coders.

               I am guessing that you will likely hear from said Python
coders via Private Message or direct e-mail in response to this one.   I am
asking that the topic be closed for ongoing discussion on the NVDA group
itself.
--

Brian *-* Windows 10 Pro, 64-Bit, Version 1809, Build 17763

*Growth for the sake of growth is the ideology of the cancer cell.*

           ~ Edward Abbey



Re: how to copy text using clip speak?

Brian's Mail list account <bglists@...>
 

Yes in some cases using screen navigation when it is reading what you want, you can do it with nvda/numpad 5 three times, then paste it somewhere and edit out the bits you don't need.
Brian

bglists@...
Sent via blueyonder.
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Brian Vogel" <@britechguy>
To: <nvda@nvda.groups.io>
Sent: Thursday, April 18, 2019 4:16 PM
Subject: Re: [nvda] how to copy text using clip speak?


On Thu, Apr 18, 2019 at 10:58 AM, sazid wrote:


i want to copy a text from a dialogue box so how can i use this?
That is, or can be, a completely different thing, as some dialog boxes are "uncopyable" by typical means.

See: https://duckduckgo.com/?q=windows+copy+dialog+text

Specifically see the second and third result pages, that discuss using Textify to get "uncopyable" text from certain dialog boxes.

None of this is in any way connected to ClipSpeak.

--

Brian *-* Windows 10 Pro, 64-Bit, Version 1809, Build 17763

*Growth for the sake of growth is the ideology of the cancer cell.*

~ Edward Abbey

Re: A very interesting problem: the use of Spyder outside the Anaconda, a few more questions and advice

 

Shasa,

              I'm going to reach out to the contacts I have and ask them to take a look at this topic and reply to you privately.  There seem to be a lot of "regulars" who are also Python coders, a number of whom work on NVDA itself and/or its add-ons.

              That being said, the subject of Python coding at the depth and breadth that your message indicates you want to pursue makes it off-topic for the NVDA list.  I won't even suggest you take this to the chat group, as the scope of the discussion you want to have can only occur among seasoned Python coders.

               I am guessing that you will likely hear from said Python coders via Private Message or direct e-mail in response to this one.   I am asking that the topic be closed for ongoing discussion on the NVDA group itself.
--

Brian - Windows 10 Pro, 64-Bit, Version 1809, Build 17763  

Growth for the sake of growth is the ideology of the cancer cell.

           ~ Edward Abbey

 

 

A very interesting problem: the use of Spyder outside the Anaconda, a few more questions and advice

Shasa
 

Hi all,

I've been thinking about a problem for a long time.
I couldn't solve this problem. I couldn't find a logical explanation.

I have been interested in Python for 3 years. During this time, I
searched for IDEs that can be used by the blind.
For example VSCode, pycharm, Visual Studio ... The list is too long.
I couldn't use any of the IDEs in this list. NVDA had problems
communicating with IDEs.
Then I wanted to make an introduction to machine learning and artificial
intelligence. So I put Anaconda on my computer, which is the best solution
What is this! The Spyder IDE was working well with NVDA. I am very happy.
I especially liked the template feature. The ability to complete code is
also great.
Spyder is connected to the QT interface. QT works well in Anaconda.

I installed Spyder in another version of Python. I wanted to work at
Py2. Installation is smooth.
And yes :-), that's the moment. NVDA works very well in anaconda
deployment, while in another independent version of python, Spyder and
NVDA are not communicating properly.
I have questions. Both distributions are based on QT. However, while
Anaconda deployment works well with NVDA, the packages installed from
PyPI are not working properly. Py2-py3 does not notice. I tried these.
Why is this caused by?

In fact, Anaconda is a huge package. Some of the tools don't work for
me. So I want to install an independent Spyder.
I'm having problems when I set it up. These problems aren't in Anaconda.

And there are several requests:
What should be the code-writing environment for a blind?
What are your IDE preferences?
Experience sharing time :-) .

I wanted to use VSCode. Very complicated, I got alerts and found it more
than cool :-). Then it became unusable. I don't know what the last
situation is.
NodeJS applications are doing great studies in visual field. I think we
can't catch them with NVDA. Modern web technologies will lead us to
where we will be curious and watch.

Re: key repeat shut off

 

On Thu, Apr 18, 2019 at 10:51 AM, Sarah k Alawami wrote:
Is there not a key repeat and key delay in windows?
Yes, as part of the settings for Filter Keys in Settings, Ease of Access, Keyboard Pane in Windows 10 [and since Marvin's message has Sent from Mail for Windows 10 as it's signature . . .].   It is only available when Filter Keys is toggled ON, otherwise the setting is hidden.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 1809, Build 17763  

Growth for the sake of growth is the ideology of the cancer cell.

           ~ Edward Abbey

 

 

Re: how to copy text using clip speak?

 

On Thu, Apr 18, 2019 at 10:58 AM, sazid wrote:
i want to copy a text from a dialogue box so how can i use this?
That is, or can be, a completely different thing, as some dialog boxes are "uncopyable" by typical means.

See:  https://duckduckgo.com/?q=windows+copy+dialog+text

Specifically see the second and third result pages, that discuss using Textify to get "uncopyable" text from certain dialog boxes.

None of this is in any way connected to ClipSpeak.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 1809, Build 17763  

Growth for the sake of growth is the ideology of the cancer cell.

           ~ Edward Abbey

 

 

Re: how to copy text using clip speak?

Gene
 

Clipspeak has nothing to do with how you copy text.  to copy text you can't get to using the cursor or virtual cursor in browse mode, you need to use review keys.
In the dialog, move to the start of the text with the review keys.  Use NVDA f9 to set the start marker.
Move to the end of the text using the review keys.  Press f10 twice to copy the text to the clipboard.  I'm not sure if you will hear speech the first time you press f10 but it doesn't matter.  Press f10 quickly twice.
 
Gene

----- Original Message -----
From: sazid
Sent: Thursday, April 18, 2019 9:58 AM
Subject: Re: [nvda] how to copy text using clip speak?

i want to copy a text from a dialogue  box so how can i use this?  is
there is any alternative to copy and paste that message?

thanks and regards,
sazid

On 4/18/19, Gene <gsasner@...> wrote:
> You use the same keys as always.  Clipspeak speaks the action being taken.
> That's all it does.
>
> Gene
> ----- Original Message -----
>
> From: sazid
> Sent: Thursday, April 18, 2019 8:24 AM
> To: nvda
> Subject: [nvda] how to copy text using clip speak?
>
>
> can anyone tell the keys to copy text using clip speak?
>
> thanks and regards,
> sazid
>
>
>
>
>
>


Re: how to copy text using clip speak?

sazid
 

i want to copy a text from a dialogue box so how can i use this? is
there is any alternative to copy and paste that message?

thanks and regards,
sazid

On 4/18/19, Gene <gsasner@...> wrote:
You use the same keys as always. Clipspeak speaks the action being taken.
That's all it does.

Gene
----- Original Message -----

From: sazid
Sent: Thursday, April 18, 2019 8:24 AM
To: nvda
Subject: [nvda] how to copy text using clip speak?


can anyone tell the keys to copy text using clip speak?

thanks and regards,
sazid





Re: key repeat shut off

Sarah k Alawami
 

Is there not a key repeat and key delay in windows? I think that's what they mean? I'm not on my windows machine and won't be until probably tomorrow.

On 18 Apr 2019, at 4:24, marcio via Groups.Io wrote:

I'm not sure of what you're wanting.
If you want NVDA to not report each and every key you happen to press, then the command is NVDA+2. If, on the other hand, you want NVDA not to announce commands in general, then you should hit NVDA+4.
Now, if none of them is what you're after, write back so that I can offer further suggestions :)

Cheers,
Marcio AKA Starboy

Sent from a galaxy far, far away.

Follow or add me on Facebook

Em 18/04/2019 08:08, marvin kotler disse:

Good morning list; had some health issues so have not been on for a long time; and forgot is there a shut off of some sort so nvda does not repeat a key over and over? Any help would be appreciated.

marv

                               

Sent from Mail for Windows 10

 


Re: how to copy text using clip speak?

Gene
 

You use the same keys as always.  Clipspeak speaks the action being taken.  That's all it does.
 
Gene

----- Original Message -----
From: sazid
Sent: Thursday, April 18, 2019 8:24 AM
To: nvda
Subject: [nvda] how to copy text using clip speak?

can anyone tell the keys to copy text using clip speak?

thanks and regards,
sazid


Re: latest new windows

 

Uh, gentlemen, if the question is actually about Windows 10 (as opposed to NVDA interacting with it - which I believe has been addressed as completely as it can be) please take it either to the Chat Subgroup or the Windows 10 for Screen Reader Users group.
--

Brian - Windows 10 Pro, 64-Bit, Version 1809, Build 17763  

Growth for the sake of growth is the ideology of the cancer cell.

           ~ Edward Abbey

 

 

Re: how to copy text using clip speak?

 

I am presuming, based on Mr. Gaff's observations and a ClipSpeak download page, that what you're really asking is about the keyboard shortcuts for selecting text in differing size "chunks."

See:  Selecting Text Using Windows Keyboard Shortcuts

After it's selected, CTRL+C is the standard "copy to clipboard" command, as usual.
--

Brian - Windows 10 Pro, 64-Bit, Version 1809, Build 17763  

Growth for the sake of growth is the ideology of the cancer cell.

           ~ Edward Abbey

 

 

Re: how to copy text using clip speak?

Brian's Mail list account <bglists@...>
 

Does it not merely emulate what windows does in the main?
I find that I get errors, on Microsoft word when I use that add on but for just normal cutting and pasting its the same as windows.
Brian

bglists@...
Sent via blueyonder.
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "sazid" <skstraders.nlr@...>
To: "nvda" <nvda@nvda.groups.io>
Sent: Thursday, April 18, 2019 2:24 PM
Subject: [nvda] how to copy text using clip speak?


can anyone tell the keys to copy text using clip speak?

thanks and regards,
sazid