Date   
Re: a question about vocalizer

Richard Wells
 

One cool thing about Tiflotecnia Vocalizer Automotive, if you use
compact voice variant, pitch change does work for Caps and general pitch
changing.

On 2/21/2020 6:34 AM, Rui Fontes wrote:
Hello!


If you are using Tiflotecnia's Vocalizer Expressive voices, the pitch
increase for capital letters work as advertised.


If you are using our Vocalizer voices version 2.0, based on Vocalizer
Automotive, there are no possibility of pitch changing, so it is
necessary to use the bips or say caps options to anounce capital letters.


If you are using Vocalizer voices from CodeFactory, check if you have
not checked the option to be the driver to control the pitch...


Best regards,

Rui Fontes

Tiflotecnia, Lda.



Às 12:18 de 21/02/2020, P. Otter escreveu:
hello all!
I've a question about the vocalizer voices.
for nvda2019.3.1
i've registered it and the voice works fine, but with capital
letters, the pitch has to increase
but it don't happens.
there is an restriction in the pitch.
also when i try to make the pitch higher it is not possible.
can i do something to end the restrictions?
 sorry for my bad english

but can you help me?
thanks in advance
paul otter


Re: nvda and windows explorer

Rui Fontes
 

Hello!


Install this add-on and the command will work as expected...


https://www.dropbox.com/s/m45683vllrggy6d/zExplorer.nvda-addon?dl=1


Best regards,

Rui Fontes

NVDA portuguese team

Tiflotecnia, Lda.



Às 14:32 de 21/02/2020, heike67 escreveu:

that's what i've tried to do already at my first day with nvda. i selected some files and pressed nvda and end. but it says only <no status line found.

Re: nvda key q to quit or restart

brice Mijares
 

Brian, What is meant by a full unstall? if you mean uninstalling from add and remove, I can do that. and I have fast reboot disabled.

On 2/21/2020 6:33 AM, Brian Vogel wrote:
Have you done a full uninstall, reboot (using Restart if you have Fast Startup enabled under Windows 10), and reinstall from a fresh copy of the installer?   If you haven't, you should.

--

Brian *-*Windows 10 Pro, 64-Bit, Version 1909, Build 18363

*Power is being told you're not loved and not being destroyed by it.*

~ Madonna

Re: changes in speech in NVDA 2019.3

Giles Turnbull
 

thanks, Quentin :)

Re: nvda key q to quit or restart

 

Have you done a full uninstall, reboot (using Restart if you have Fast Startup enabled under Windows 10), and reinstall from a fresh copy of the installer?   If you haven't, you should.

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Power is being told you're not loved and not being destroyed by it.

       ~ Madonna

 

 

Re: nvda and windows explorer

 

that's what i've tried to do already at my first day with nvda. i selected some files and pressed nvda and end. but it says only <no status line found.

nvda key q to quit or restart

brice Mijares
 

Ever since the latest update to NVDA, messages in Thunderbird won't read, selecting text, files and folders and the copy or cut command won't work. NVDA key q don't work, so I have to hold down the control key alt key and hit n twice rapidly.  How would I get a copy of the log file if this is happening every time I boot my system? Thanks.

Re: a question about vocalizer

P. Otter
 

many thanks!
paul otter


Op 21-2-2020 om 13:34 schreef Rui Fontes:

Hello!


If you are using Tiflotecnia's Vocalizer Expressive voices, the pitch increase for capital letters work as advertised.


If you are using our Vocalizer voices version 2.0, based on Vocalizer Automotive, there are no possibility of pitch changing, so it is necessary to use the bips or say caps options to anounce capital letters.


If you are using Vocalizer voices from CodeFactory, check if you have not checked the option to be the driver to control the pitch...


Best regards,

Rui Fontes

Tiflotecnia, Lda.



Às 12:18 de 21/02/2020, P. Otter escreveu:
hello all!
I've a question about the vocalizer voices.
for nvda2019.3.1
i've registered it and the voice works fine, but with capital letters, the pitch has to increase
but it don't happens.
there is an restriction in the pitch.
also when i try to make the pitch higher it is not possible.
can i do something to end the restrictions?
 sorry for my bad english

but can you help me?
thanks in advance
paul otter


Re: nvda and windows explorer

Gene
 

Try using the read status line command.  Using the desktop layout, it is NVDA key end.  I don't know if Windows 10 has a status line in File Explorer.  My recollection is that this command works in Windows 7 and I'm sure it does in XP.  Try it in various contexts when you want information.
Gene

----- Original Message -----
From: heike67
Sent: Friday, February 21, 2020 8:03 AM
Subject: [nvda] nvda and windows explorer

Hi
my last post did not appear here, I will try again.i have only been using nvda since december 2019 and would like to know if there is a shorter way to hear how many files are selected in a folder.i only know the possibility to display the properties.

nvda and windows explorer

 

Hi
my last post did not appear here, I will try again.i have only been using nvda since december 2019 and would like to know if there is a shorter way to hear how many files are selected in a folder.i only know the possibility to display the properties.

Re: windows 10 disk clean up

David Ingram
 



-----Original Message-----
From: Shaun Everiss
Sent: Jan 28, 2020 1:46 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] windows 10 disk clean up

Well that is one way to do it.
The issue is it searches for and clears everything on all drives and that may not be necessary unless your system and your accounts are on different drives.

I have a win7 system like this.

However, the easiest way to handle that is to.

1.  type disk in search.

right click disk cleanup and run as admin.

If you have 2 drives, you may find the second drive may not have that much on it.

On the os drive, the most important things that will take space are.

1.  windows update and device drivers especially for display drivers you have installed.

My amd has frequent updates for its drivers.

2.  windows installations.

Only do that if you are happy with your build though and want to kill them.

They will kill themselves within a 10 day period.

At least that was what it was when I last looked into that.

Saying that, if you have one of those dinkey tablets with little space, you will probably want to immediately delete that so you can put everything back.

I honestly don't know how people can use 16-32-64gb windows tablets.

a 128gb is minimal in my book but people do use them somehow and I have no idea how.



On 23/01/2020 6:36 am, Sarah k Alawami wrote:

Why not do cleanmgr /sageset / then cleanmgr /sagerun:1 as I do this all thet iem for my disk clean up. You can see many many hidden items that real disk clean up does not show you, and it sitll will not hurt your system. You do these from the run dialogue by the way.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.

to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on [twitch.](twitch.tv/ke7zum] Feel free to give the channel a follow and see what is up there.

Finally, to become a patron and help support the podcast go here

On 21 Jan 2020, at 19:10, hurrikennyandopo ... wrote:

Hi

press the windows key and when the search box comes up type in disk it will come up with a result called disk cleanup/ Press the enter key on it. It will then come to another screen there you can pick your drive to do it to it is a combo box it will usually default to c: drive. You can use the down arrow key to go to another if you want to. What ever one you pick say c: drive you will then need to tab to ok button then press the enter key. It will then calculate how much can be cleaned up.

It will give you a list of areas it can clean up and say those areas. There is a check box next to each one. You can arrow down the list and use the space bar to check the box.

Down towards the bottom of the list you will then need to tab as the down arrow key will not take you any further.. If you tab once it will land on a system files button I think it was called. Press the enter key and repeate the process like before except this for will be for system files. Then at the bottom of the list you have selected all the ones you want removed you will then need to tab to the ok button then press the enter key.

It will then give you a message just say yes to it and then it will clean it up all for you.

Hope it helps.

Do not worry it will not remove any files only the ones you picked not needed.

Gene nz

On 22/01/2020 3:35 pm, anthony borg wrote:

Hi folks,

Does anyone can explain to me how to use the windows 10 disk clean up
please?
Thanks in advance

Anthony

Re: Colour of text

AKH AKH
 

Rui and Ralf, thanks. I've never noticed this great feature in the Quick
Keys guide?


Andrew

On 21/02/2020 13:11, Ralf Kefferpuetz wrote:
Yes, in focusmode with insert-f.

Cheers,
Ralf

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of AKH AKH
Sent: Freitag, 21. Februar 2020 13:25
To: nvda@nvda.groups.io
Subject: [nvda] Colour of text

Is there a quick key to tell me what colour the text is on a website, as I land on a character? I know about the 'announce colour' option in settings, but I just want to discover the colour occasionally and not have the colour of every heading, link and text read out as I go through a website.


Andrew








Re: Colour of text

Ralf Kefferpuetz
 

Yes, in focusmode with insert-f.

Cheers,
Ralf

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of AKH AKH
Sent: Freitag, 21. Februar 2020 13:25
To: nvda@nvda.groups.io
Subject: [nvda] Colour of text

Is there a quick key to tell me what colour the text is on a website, as I land on a character? I know about the 'announce colour' option in settings, but I just want to discover the colour occasionally and not have the colour of every heading, link and text read out as I go through a website.


Andrew

Re: Accessibility issues with latest potplayer, warn user not to upgrade to latest version

 

hello.
and thanks for suggestions of everyone that helped us to make pot
player accessible again.
the last version of pot player is 200204.
today i downloaded and installed it on my windows xp.
both bringing preferences by f5 and using context menu with
application key are accessible.
God bless you all!

On 2/20/20, William Wong <@WaiWilliam> wrote:
Hi,

One of my computer updated potplayer to 1.7.21126

and came across the following issues with nvda.


1. pressing application key / right click with mouse cannot access the
context menu


2. pressing f5 cannot access the preferences


3. the installer of the latest version added a adware, and if it is on
that step, pressing tab with nvda cannot access the buttons.


I found it very frustrated, cause my work require potplayer's function.


Anyone would know any media player has a function to press hotkey and
copy the current play position to clipboard?


Thanks,

William







--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali

Re: Colour of text

Rui Fontes
 

NVDA+F?


Rui Fontes


Às 12:25 de 21/02/2020, AKH AKH escreveu:

Is there a quick key to tell me what colour the text is on a website, as
I land on a character?  I know about the 'announce colour' option in
settings, but I just want to discover the colour occasionally and not
have the colour of every heading, link and text  read out as I go
through a website.


Andrew



Re: a question about vocalizer

Rui Fontes
 

Hello!


If you are using Tiflotecnia's Vocalizer Expressive voices, the pitch increase for capital letters work as advertised.


If you are using our Vocalizer voices version 2.0, based on Vocalizer Automotive, there are no possibility of pitch changing, so it is necessary to use the bips or say caps options to anounce capital letters.


If you are using Vocalizer voices from CodeFactory, check if you have not checked the option to be the driver to control the pitch...


Best regards,

Rui Fontes

Tiflotecnia, Lda.



Às 12:18 de 21/02/2020, P. Otter escreveu:

hello all!
I've a question about the vocalizer voices.
for nvda2019.3.1
i've registered it and the voice works fine, but with capital letters, the pitch has to increase
but it don't happens.
there is an restriction in the pitch.
also when i try to make the pitch higher it is not possible.
can i do something to end the restrictions?
 sorry for my bad english

but can you help me?
thanks in advance
paul otter

Re: loving the new NVDA update

molly the blind tech lover
 

Hi.

I love the new NVDA too 😀

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Jimmy Vonderlinden via Groups.Io
Sent: Thursday, February 20, 2020 4:27 PM
To: nvda@nvda.groups.io
Subject: [nvda] loving the new NVDA update

 

 Just updated my NVDA to the latest version and I have to say i'm very impressed with it, especially with microsoft edge and the twitter website. Biggest change I have noticed is that quote tweet is no longer spelled out. It's a nice change. Hope all enjoy your day. 
Just wanted to point that out for those who havent noticed

Colour of text

AKH AKH
 

Is there a quick key to tell me what colour the text is on a website, as
I land on a character?  I know about the 'announce colour' option in
settings, but I just want to discover the colour occasionally and not
have the colour of every heading, link and text  read out as I go
through a website.


Andrew

a question about vocalizer

P. Otter
 

hello all!
I've a question about the vocalizer voices.
for nvda2019.3.1
i've registered it and the voice works fine, but with capital letters, the pitch has to increase
but it don't happens.
there is an restriction in the pitch.
also when i try to make the pitch higher it is not possible.
can i do something to end the restrictions?
 sorry for my bad english

but can you help me?
thanks in advance
paul otter

Re: Accessibility issues with latest potplayer, warn user not to upgrade to latest version

William Wong
 

Thanks for this info.

After the fix, my potplayer is now able to access the context menu.


I think the problem is not exclusive to Win 10, because my win 7 is having this issue as well.


anuj sharma 於 20/2/2020 23:14 寫道:

How to make accessible latest DAUM pot player
1 open pot player
2 press f5 for preferences
3 expend general and move to skin
4 press tab till “context menu”
5 select “system default” by up and down arrow key
6 press ok and your pot player will be accessible
thanks and try it

On 20/02/2020, CARLOS-ESTEBAN <carlosestebanpianista@...> wrote:
Hello.
Pot Player now have accessibility issues. A temporal solution is search the
installer of a previous version and not update, but the developers now
introduce this issues, and in 2018 this player not had a problem with NVDA.
Regards.