Date   

Re: HIMS Syncbraille Display and NVDA on Desktop PC

Marten Post Uiterweer
 

Brian,

Indeed, you don't have a brailledisplay, that is the reason.

Marten

On Wed, 02 Dec 2020 13:16:02 -0800 "Brian Vogel" <britechguy@gmail.com> wrote:

On Wed, Dec 2, 2020 at 11:27 AM, Marten Post Uiterweer wrote:


You will land on a option to choose the brailledisplay driver and press
space to open this menu.
First, I do not have a Braille display connected, so this could be the difference, but the only control I see for Braille is the Download and install braille button.

If I SHIFT+TAB seventeen times I land on the checkbox for Sync the Narrator cursor and system focus , which is checked by default.

--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042

*If you think that you can think about a thing, inextricably attached to something else, without thinking of the thing it is attached to, then you have a legal mind.*

~ Thomas Reed Powell





Re: NVDA goes silent when arrowing down the list of participants panel in Zoom

Bob Cavanaugh
 

Nor have I done much testing with this, as I'm usually trying to focus
on the meeting I'm attending, but I do not expect my screen reader, no
matter what it is, to suddenly be delayed by several seconds after
arrowing down a half a dozen times with no problem whatsoever. I may
have a meeting on Saturday, so I will play around with this if that
meeting happens.

On 12/2/20, Gene <gsasner@gmail.com> wrote:
How long do you wait before deciding that nothing will be read? The
meetings I attend generally don't have a lot of attendees. Generally
something like eight or ten. If I down arrow a lot of times, speech is
delayed, I didn't play with this much because I wanted to hear what was
going on in the meeting, but it seemed to me that in perhaps ten seconds, I

would hear something.

It might help those analyzing the problem if they knew if speech stops or is

very delayed. I didn't do enough testing to know on my machine. I may when

I attend another meeting.

Gene
-----Original Message-----
From: Sim Kah Yong
Sent: Wednesday, December 02, 2020 8:36 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA goes silent when arrowing down the list of
participants panel in Zoom

Hi

I tried the read current line or the read the current line of the
navigation object and NVDA reads to me when I encounter the problem.
This is just a work-around, how nice if a solution can be found for
this. Thanks.

On 11/30/2020 11:07 AM, Gene wrote:
What happens if you down arrow and when speech stops, read the current
line. You can also try reading the current line of the navigator object,
in the desktop layout, numpad 8. I don't know the laptop layout. You may

not hear anything but if this combination allows you to hear the names as

you move, that may be a work around that is reasonable for now.

Gene
-----Original Message----- From: Sky Mundell
Sent: Sunday, November 29, 2020 8:20 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA goes silent when arrowing down the list of
participants panel in Zoom

Hello Bob. Just curious, does SA have that problem? System Access I mean?

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Bob
Cavanaugh
Sent: Sunday, November 29, 2020 6:09 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA goes silent when arrowing down the list of
participants panel in Zoom

I have this issue too. What I've found to work is to hit your up arrow
when you get to the point where it goes silent, then your down arrow
again. That helps for a brief time, then you have to repeat that process
again. I agree, kind of annoying. I'm also having two additional issues
with NVDA not reading things properly in Zoom:
1. When typing anything in Zoom and you type something wrong, NVDA does
not read what you backspace. It reads if you type things normally, but if

you try to review or correct an error, it will not read.
2. If you're in a meeting that initially isn't being recorded, then the
host starts recording, NVDA does not read the alert that tells you that
the meeting is now being recorded.

On 11/29/20, Sim Kah Yong <simkahyong@gmail.com> wrote:
Hi all,

Wish to report the above problem when using NVDA in Zoom. IN a zoom
meeting, if I wish to find out the list of participants, I will press
alt + U to call out the participants panel. I will then arrow down the
list. After severl down arrow, NVDA will stop speaking.

I am using the latest version of NVDA, Zoom enhancement app and Zoom.
This problem has been there even with the older version of NVDA and
Zoom. I am using Windows 8.1. I have tried the following with no avail:

1. Wit no apps

2. restart NVDA

3. Re-boot my computer.

Just wish to find out if any of you have similar problem and what can
be done? Perhaps this can help to improve future version of NVDA.

I have also use JAWS and this has not been a problem. Thanks all.



























Re: Welcoming you to my talk at NVDACon

Quentin Christensen
 

I added quite a bit of information on NVDACon, how to join and so on in this week's In-Process blog post: https://www.nvaccess.org/post/in-process-2nd-december-2020/

Basically, to join NVDACon, see the "How to join us" page on NVDACon.org: https://www.nvdacon.org/how-to-join-us

Kind regards

Quentin.

On Thu, Dec 3, 2020 at 10:55 AM Deborah Armstrong <debee@...> wrote:
Go to nvdacon.org



--
Quentin Christensen
Training and Support Manager


Re: NVDA and Word

Quentin Christensen
 

Hi Mike,

This is not so much an NVDA feature as a Word feature.  You could try setting the view mode to "Draft" (alt+w, e) rather than the default page layout (alt+w, p to get back to page layout).

If you want all the footnotes in the one place in the document, do you maybe want "endnotes" instead of footnotes?  They work essentially the same, but they are grouped at the very end of the document, rather than at the bottom of each page.

Kind regards

Quentin.

On Wed, Dec 2, 2020 at 10:17 AM mike mcglashon <michael.mcglashon@...> wrote:

Hi guys:

 

Am new to this list I think;

 

My question relates to NVDA and word.

I notice whenst reading cases for law school,

NVDA will say “footnote area” and then say “document” when it returns to the actual document being read.

 

Is there a way to have NVDA either:

Skip the footnote portions and continue reading original doc,
or,

Is there a way to group all the footnotes together so that NVDA can go from one to another?

 

Please advise as you like.

 

Mike M.

 

Mike McGlashon

Email: Michael.mcglashon@...

Ph: 618 783 9331

 



--
Quentin Christensen
Training and Support Manager


Re: NVDA goes silent when arrowing down the list of participants panel in Zoom

Gene
 

How long do you wait before deciding that nothing will be read? The meetings I attend generally don't have a lot of attendees. Generally something like eight or ten. If I down arrow a lot of times, speech is delayed, I didn't play with this much because I wanted to hear what was going on in the meeting, but it seemed to me that in perhaps ten seconds, I would hear something.

It might help those analyzing the problem if they knew if speech stops or is very delayed. I didn't do enough testing to know on my machine. I may when I attend another meeting.

Gene

-----Original Message-----
From: Sim Kah Yong
Sent: Wednesday, December 02, 2020 8:36 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA goes silent when arrowing down the list of participants panel in Zoom

Hi

I tried the read current line or the read the current line of the
navigation object and NVDA reads to me when I encounter the problem.
This is just a work-around, how nice if a solution can be found for
this. Thanks.

On 11/30/2020 11:07 AM, Gene wrote:
What happens if you down arrow and when speech stops, read the current line. You can also try reading the current line of the navigator object, in the desktop layout, numpad 8. I don't know the laptop layout. You may not hear anything but if this combination allows you to hear the names as you move, that may be a work around that is reasonable for now.

Gene
-----Original Message----- From: Sky Mundell
Sent: Sunday, November 29, 2020 8:20 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA goes silent when arrowing down the list of participants panel in Zoom

Hello Bob. Just curious, does SA have that problem? System Access I mean?

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Bob Cavanaugh
Sent: Sunday, November 29, 2020 6:09 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA goes silent when arrowing down the list of participants panel in Zoom

I have this issue too. What I've found to work is to hit your up arrow when you get to the point where it goes silent, then your down arrow again. That helps for a brief time, then you have to repeat that process again. I agree, kind of annoying. I'm also having two additional issues with NVDA not reading things properly in Zoom:
1. When typing anything in Zoom and you type something wrong, NVDA does not read what you backspace. It reads if you type things normally, but if you try to review or correct an error, it will not read.
2. If you're in a meeting that initially isn't being recorded, then the host starts recording, NVDA does not read the alert that tells you that the meeting is now being recorded.

On 11/29/20, Sim Kah Yong <simkahyong@gmail.com> wrote:
Hi all,

Wish to report the above problem when using NVDA in Zoom. IN a zoom
meeting, if I wish to find out the list of participants, I will press
alt + U to call out the participants panel. I will then arrow down the
list. After severl down arrow, NVDA will stop speaking.

I am using the latest version of NVDA, Zoom enhancement app and Zoom.
This problem has been there even with the older version of NVDA and
Zoom. I am using Windows 8.1. I have tried the following with no avail:

1. Wit no apps

2. restart NVDA

3. Re-boot my computer.

Just wish to find out if any of you have similar problem and what can
be done? Perhaps this can help to improve future version of NVDA.

I have also use JAWS and this has not been a problem. Thanks all.



















Re: NVDA goes silent when arrowing down the list of participants panel in Zoom

Sim Kah Yong
 

Hi

I tried the read current line or the read the current line of the navigation object and NVDA reads to me when I encounter the problem. This is just a work-around, how nice if a solution can be found for this. Thanks.

On 11/30/2020 11:07 AM, Gene wrote:
What happens if you down arrow and when speech stops, read the current line. You can also try reading the current line of the navigator object, in the desktop layout, numpad 8.  I don't know the laptop layout.  You may not hear anything but if this combination allows you to hear the names as you move, that may be a work around that is reasonable for now.

Gene
-----Original Message----- From: Sky Mundell
Sent: Sunday, November 29, 2020 8:20 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA goes silent when arrowing down the list of participants panel in Zoom

Hello Bob. Just curious, does SA have that problem? System Access I mean?

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Bob Cavanaugh
Sent: Sunday, November 29, 2020 6:09 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA goes silent when arrowing down the list of participants panel in Zoom

I have this issue too. What I've found to work is to hit your up arrow when you get to the point where it goes silent, then your down arrow again. That helps for a brief time, then you have to repeat that process again. I agree, kind of annoying. I'm also having two additional issues with NVDA not reading things properly in Zoom:
1. When typing anything in Zoom and you type something wrong, NVDA does not read what you backspace. It reads if you type things normally, but if you try to review or correct an error, it will not read.
2. If you're in a meeting that initially isn't being recorded, then the host starts recording, NVDA does not read the alert that tells you that the meeting is now being recorded.

On 11/29/20, Sim Kah Yong <simkahyong@gmail.com> wrote:
Hi all,

Wish to report the above problem when using NVDA in Zoom. IN a zoom
meeting, if I wish to find out the list of participants, I will press
alt + U to call out the participants panel. I will then arrow down the
list. After severl down arrow, NVDA will stop speaking.

I am using the latest version of NVDA, Zoom enhancement app and Zoom.
This problem has been there even with the older version of NVDA and
Zoom. I am using Windows 8.1. I have tried the following with no avail:

1.  Wit no apps

2.  restart NVDA

3.  Re-boot my computer.

Just wish to find out if any of you have similar problem and what can
be done? Perhaps this can help to improve future version of NVDA.

I have also use JAWS and this has not been a problem. Thanks all.


















Re: NVDA reading only one line with NVDA-down arrow

Fresh Start
 

It may sound strange, but check and see if the layout got changed. Then
make sure the screen is maximized. Sometimes the screen will change for
whatever reason. It might not totally minimize. But will change in size.
Also if there is a change in font size, that can happen. So maximize the
screen with alt plus space followed x with the document opened.

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Ann Byrne
Sent: Wednesday, December 02, 2020 4:34 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA reading only one line with NVDA-down arrow

She is using the desktop layout. At first NVDA read easily. Now it
doesn't.


Inserting Latency in NVDA Speech and Bluetooth Audio

Bhavya shah
 

Dear all,

This may come off as an odd request, but I do need it to simulate a
certain scenario. I would like to have NVDA's speech - with the same
voice settings and my same ESpeak-NG - be outputted but with a delay
of 150 ms. Latency is generally frowned upon, yes, but I would like to
artificially manufacture it at present. Is there some way of doing
this?

For context, I am aware that standard Bluetooth audio (sans low
latency audio codecs) typically have an associated latency of 150-250
ms. Since I do not have the required equipment to test that
practically, I want to emulate that latency with NVDA on my laptop
speakers so as to get a sense of how much a couple hundred
milliseconds of delay is likely to affect me in the real world.

Thanks.

--
Best Regards
Bhavya Shah
Stanford University | Class of 2024
E-mail Address: bhavya.shah125@gmail.com
LinkedIn: https://www.linkedin.com/in/bhavyashah125/


Re: Making NVDA profiles in diffrent languages

 

Create portable copies but save them to your hard drive. You want a portable copy for each language you know. Create shortcuts to each of these portable copies. Instead of running on flash drives, they simply run off your PC from their own directories.

You will also need a way to change the windows display and interface languages as well, or you're going to have German NVDA trying to read English! There are ways to do it -- talk to Microsoft support or look through their knowledgebase to get assistance. Microsoft also has two disability support portals: one for home users and one for enterprise users. You can ask these folks about easily switching your Windows language.

Remember Windows has an interface language, a display language a keyboard language and a speech language. You can set any or all of these. And you can switch between them.  Though the traditional "language bar"is a floating toolbar that NVDA cannot read, the keystrokes to switch languages are accessible and you don't really need to access the language bar to do the switching. I'll be discussing this in my NVDACon talk this Saturday.


Re: NVDA Verbosity for Grouping and sorting messages in Outlook - Can it be changed?

 

I am sorry I can't be very specific, but in fooling with my view settings in outlook I managed to turn grouping off and it cut out all that verbosity. You can adjust your view to include fewer columns too. Since NVDA is reading outlook's document object model and not the screen it should respond appropriately if you adjust your view to be more minimalist.
Another thing to know: if you are focused on a message that is a newsletter and outlook announces garbage about pictures not downloading, etc. you can use your applications key, select junk, select "not junk"and by marking this message as not Spam, anything else coming from that sender will be whitelisted. Whitelisting a message also causes Outlook to not display and NVDA to not speak verbose messages about it. Because outlook is so configurable, you will find that changing its settings radically affects what NVDA speaks.


Re: Welcoming you to my talk at NVDACon

 

Go to nvdacon.org


Re: problem with links in email when using Thunderbird

 

On Wed, Dec 2, 2020 at 06:38 PM, Gene wrote:
But is a reply to sender link available in e-mail programs on lists where the address is hidden?
-
I have no idea.  I have never dealt with an e-mail list where e-mail addresses are hidden such that you cannot reply privately if you so choose.

But even if such exist, they're irrelevant to discussions regarding Groups.io, and the Reply to Sender link, which is provided on every message that goes out.  This conversation has a clearly defined scope, and I'm not trying to expand beyond it.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

If you think that you can think about a thing, inextricably attached to something else, without thinking of the thing it is attached to, then you have a legal mind.

        ~ Thomas Reed Powell

 


Re: problem with links in email when using Thunderbird

Gene
 

But is a reply to sender link available in e-mail programs on lists where the address is hidden? Does it make sense to hide the address while allowing a reply to sender link that will expose the address?

Gene

-----Original Message-----
From: Sarah k Alawami
Sent: Wednesday, December 02, 2020 5:17 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] problem with links in email when using Thunderbird



That will not always work as for some lists like those I run I have the address hidden so you might see someone'@groups.io even though that is not their address. Hence forth, you cannot rely on that either 100 percent.

--

Sarah Alawami, owner of TFFP. . For more info go to our website.

Check out my adventures with a shadow machine.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on twitch. Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page You will also be able to buy some of my products and eBooks there.

Finally, to become a patron and help support the podcast go here

On 2 Dec 2020, at 15:07, Gene wrote:



I forgot to add that when you are finished working with the source, close it with alt f4.

Gene
-----Original Message----- From: Gene via groups.io
Sent: Wednesday, December 02, 2020 5:06 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] problem with links in email when using Thunderbird

If such features work, that's fine. I don't rely on them in part because I
wanted to know how to do this before such features were available.

For Thunderbird, if you are in an opened message, and you use the command
control u, you will see the source, which other programs call full headers.
With Thunderbird, you are using Browse Mode when looking at full headers.
Search the way you would use for a web page, using the NVDA browse mode
search command for from:
That's from and a colon immediately after it. Repeat the search once and
you will be on the from line.
Move to the beginning of the name, use shift end, then copy the address to
the clipboard.
Start a new message and paste it in. There are probably other ways to do
this in Thunderbird, perhaps with fewer steps but this is the method I use
on the rare occasions I want to reply to someone directly.

And, while Groups.io has a reply to sender link, as far as I know, other
list serves don't provide one.

Gene
-----Original Message----- From: Mary Otten
Sent: Wednesday, December 02, 2020 4:56 PM
To: nvda@nvda.groups.io
Subject: [nvda] problem with links in email when using Thunderbird

Hi all,

Earlier, I posted a note where I explained that I wasn't able to
activate a link in an email sent to this group using NVDA. I tried all
the methods I'm aware of to no avail, and Brian has just confirmed that
he can't access these links using T-bird when NVDA is not loaded. So it
appears not to be an NVDA issue. I wonder if others who use T-bird are
having problems accessing links in emails, such as those that appear at
the end of messages sent to this group, where you may reply only to
sender, mute the topic or reply to the whole group. If you have had
issues activating such links, what was your fix? Or did you not find one?

Mary


Re: problem with links in email when using Thunderbird

 

By the way, the Reply to Sender link, which is simply using click-through text for a mailto: link, is 100% correct.  If it sticks trying to use it directly, regardless of the email client or webmail, try bringing up the context menu once it has focus and the correct email address of the sender is always part of that mailto link.

--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

If you think that you can think about a thing, inextricably attached to something else, without thinking of the thing it is attached to, then you have a legal mind.

        ~ Thomas Reed Powell

 


Re: problem with links in email when using Thunderbird

 

It is also possible to easily copy either the e-mail address itself, or the whole mailto link, that is given by the Reply to Sender link at the end of messages.

In Thunderbird, if I have focus on the Reply To Sender link, one of the options that comes up if I bring up the context menu is, Copy email address, which does exactly what you'd think it would do, and gets only the e-mail address out of the mailto: link.  You can then manually compose a new message and paste that email address into the To: field.

Also, oddly enough, if I attempt to directly activate the Reply to Sender link in Thunderbird, I get a new tab for composing that says, Loading, and never loads.  Yet, if I gain focus on the Reply to Sender link, bring up the context menu, and choose Compose message to, a new composition window, rather than tab, opens right up with the e-mail address of the sender pre-populated, but without the subject being pre-populated as it would were the Reply to Sender link working as designed.

I do not have any issue with the Reply to Sender link in Outlook 2016, eM Client, or Gmail webmail.  This is a Thunderbird bug.  But now that I've done some additional resource it definitely is easy to get around and you still use the Reply to Sender link, but don't activate it directly, but bring up the context menu and go from there.

--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

If you think that you can think about a thing, inextricably attached to something else, without thinking of the thing it is attached to, then you have a legal mind.

        ~ Thomas Reed Powell

 


Re: problem with links in email when using Thunderbird

Sarah k Alawami
 

That will not always work as for some lists like those I run I have the address hidden so you might see someone'@groups.io even though that is not their address. Hence forth, you cannot rely on that either 100 percent.

--

Sarah Alawami, owner of TFFP. . For more info go to our website.

Check out my adventures with a shadow machine.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on twitch. Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page You will also be able to buy some of my products and eBooks there.

Finally, to become a patron and help support the podcast go here

On 2 Dec 2020, at 15:07, Gene wrote:

I forgot to add that when you are finished working with the source, close it with alt f4.

Gene
-----Original Message----- From: Gene via groups.io
Sent: Wednesday, December 02, 2020 5:06 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] problem with links in email when using Thunderbird

If such features work, that's fine. I don't rely on them in part because I
wanted to know how to do this before such features were available.

For Thunderbird, if you are in an opened message, and you use the command
control u, you will see the source, which other programs call full headers.
With Thunderbird, you are using Browse Mode when looking at full headers.
Search the way you would use for a web page, using the NVDA browse mode
search command for from:
That's from and a colon immediately after it. Repeat the search once and
you will be on the from line.
Move to the beginning of the name, use shift end, then copy the address to
the clipboard.
Start a new message and paste it in. There are probably other ways to do
this in Thunderbird, perhaps with fewer steps but this is the method I use
on the rare occasions I want to reply to someone directly.

And, while Groups.io has a reply to sender link, as far as I know, other
list serves don't provide one.

Gene
-----Original Message----- From: Mary Otten
Sent: Wednesday, December 02, 2020 4:56 PM
To: nvda@nvda.groups.io
Subject: [nvda] problem with links in email when using Thunderbird

Hi all,

Earlier, I posted a note where I explained that I wasn't able to
activate a link in an email sent to this group using NVDA. I tried all
the methods I'm aware of to no avail, and Brian has just confirmed that
he can't access these links using T-bird when NVDA is not loaded. So it
appears not to be an NVDA issue. I wonder if others who use T-bird are
having problems accessing links in emails, such as those that appear at
the end of messages sent to this group, where you may reply only to
sender, mute the topic or reply to the whole group. If you have had
issues activating such links, what was your fix? Or did you not find one?

Mary


Re: problem with links in email when using Thunderbird

Gene
 

I forgot to add that when you are finished working with the source, close it with alt f4.

Gene

-----Original Message-----
From: Gene via groups.io
Sent: Wednesday, December 02, 2020 5:06 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] problem with links in email when using Thunderbird

If such features work, that's fine. I don't rely on them in part because I
wanted to know how to do this before such features were available.

For Thunderbird, if you are in an opened message, and you use the command
control u, you will see the source, which other programs call full headers.
With Thunderbird, you are using Browse Mode when looking at full headers.
Search the way you would use for a web page, using the NVDA browse mode
search command for from:
That's from and a colon immediately after it. Repeat the search once and
you will be on the from line.
Move to the beginning of the name, use shift end, then copy the address to
the clipboard.
Start a new message and paste it in. There are probably other ways to do
this in Thunderbird, perhaps with fewer steps but this is the method I use
on the rare occasions I want to reply to someone directly.

And, while Groups.io has a reply to sender link, as far as I know, other
list serves don't provide one.

Gene
-----Original Message-----
From: Mary Otten
Sent: Wednesday, December 02, 2020 4:56 PM
To: nvda@nvda.groups.io
Subject: [nvda] problem with links in email when using Thunderbird

Hi all,


Earlier, I posted a note where I explained that I wasn't able to
activate a link in an email sent to this group using NVDA. I tried all
the methods I'm aware of to no avail, and Brian has just confirmed that
he can't access these links using T-bird when NVDA is not loaded. So it
appears not to be an NVDA issue. I wonder if others who use T-bird are
having problems accessing links in emails, such as those that appear at
the end of messages sent to this group, where you may reply only to
sender, mute the topic or reply to the whole group. If you have had
issues activating such links, what was your fix? Or did you not find one?


Mary


Re: problem with links in email when using Thunderbird

Gene
 

If such features work, that's fine. I don't rely on them in part because I wanted to know how to do this before such features were available.

For Thunderbird, if you are in an opened message, and you use the command control u, you will see the source, which other programs call full headers. With Thunderbird, you are using Browse Mode when looking at full headers. Search the way you would use for a web page, using the NVDA browse mode search command for from:
That's from and a colon immediately after it. Repeat the search once and you will be on the from line.
Move to the beginning of the name, use shift end, then copy the address to the clipboard.
Start a new message and paste it in. There are probably other ways to do this in Thunderbird, perhaps with fewer steps but this is the method I use on the rare occasions I want to reply to someone directly.

And, while Groups.io has a reply to sender link, as far as I know, other list serves don't provide one.

Gene

-----Original Message-----
From: Mary Otten
Sent: Wednesday, December 02, 2020 4:56 PM
To: nvda@nvda.groups.io
Subject: [nvda] problem with links in email when using Thunderbird

Hi all,


Earlier, I posted a note where I explained that I wasn't able to
activate a link in an email sent to this group using NVDA. I tried all
the methods I'm aware of to no avail, and Brian has just confirmed that
he can't access these links using T-bird when NVDA is not loaded. So it
appears not to be an NVDA issue. I wonder if others who use T-bird are
having problems accessing links in emails, such as those that appear at
the end of messages sent to this group, where you may reply only to
sender, mute the topic or reply to the whole group. If you have had
issues activating such links, what was your fix? Or did you not find one?


Mary


Re: keybase

Sarah k Alawami
 

I was as the time at the beginning of the year easy. I just clicked settings, set up the drive for the explorer window, and there you go. I never did chats, but when I visited pub.keybase.com, I think it was com, I could then get a link to what ever I wanted. I stopped using it after zoom bought it as I don't really trust that partnership.

--

Sarah Alawami, owner of TFFP. . For more info go to our website.

Check out my adventures with a shadow machine.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on twitch. Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page You will also be able to buy some of my products and eBooks there.

Finally, to become a patron and help support the podcast go here

On 2 Dec 2020, at 14:13, Governor staten wrote:

I find it difficult to work with Keybase with NVDA.




On 11/30/2020 7:42 PM, Shaun Everiss wrote:
Hi.

Has anyone used keybase with nvda.

Keybase is usable though it would be nice if I knew the status of checkboxes, buttons and the like.

Some actions need to be done online but never the less I have managed to get it working with explorer.

The issue is the client, on first open it works well.

However after that it will simply open into some hidden mode.

If I move about I can get something like show recent files and open inbox.

If I do open inbox, the program opens but nvda can not read it though ocr states it is loaded.

I assume there are more than 1 window and I need to refocus though even in mouse mode nvda can't find what to press.

I like the concept of keybase.

Are there shortcut keys as such for it?

The client could be better but oh well.

I will probably report issues I have had to keybase itself though another alternitive client would be good.








problem with links in email when using Thunderbird

Mary Otten
 

Hi all,


Earlier, I posted a note where I explained that I wasn't able to activate a link in an email sent to this group using NVDA. I tried all the methods I'm aware of to no avail, and Brian has just confirmed that he can't access these links using T-bird when NVDA is not loaded. So it appears not to be an NVDA issue. I wonder if others who use T-bird are having problems accessing links in emails, such as those that appear at the end of messages sent to this group, where you may reply only to sender, mute the topic or reply to the whole group. If you have had issues activating such links, what was your fix? Or did you not find one?


Mary

1581 - 1600 of 80896