Date   

Re: OCR with NVDA

mk360
 

Hi,

How you located on the object to recognise? what commands you used to review the text? Keep in mind that you need to place the object navigator on the object where you will use OCR, press VNDA r, and use object review commands to see the results.

Regards,

mk.

El 03/05/2021 a las 16:18, David Kingsbury escribió:

Hi all,

Using the most recent version of NVDA, I installed the OCR addon, made sure my recognition language was English, and attempted to run OCR on a scanned PDF by pressing NVDA +R. It says OCR running and then done, but nothing appears. Any idea what I am doing wrong?

Thanks,

David

 

 


Re: OCR with NVDA

 

Are you certain that there is text to recognize?

Also, and someone else with more expertise than I can answer this, will NVDA OCR (which uses Windows 10 OCR) actually process an entire document or just the portion visible on the screen?  The User Guide and Quick Commands Reference both state, "To recognize the text in the current navigator object using Windows 10 OCR, press NVDA+r."  I have never been entirely clear as to what the scope of "the current navigator object" is in this context.
--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

Always remember others may hate you but those who hate you don't win unless you hate them.  And then you destroy yourself.

       ~ Richard M. Nixon

 


OCR with NVDA

David Kingsbury
 

Hi all,

Using the most recent version of NVDA, I installed the OCR addon, made sure my recognition language was English, and attempted to run OCR on a scanned PDF by pressing NVDA +R. It says OCR running and then done, but nothing appears. Any idea what I am doing wrong?

Thanks,

David

 

 


Add-on Updater 21.05 released, extra steps required for NVDA alpha snapshot users #addonrelease

 

Hi all,

Add-on Updater May 2021 update is now available. This update fixes a critical compatibility issue with latest NVDA Development releases (specifically, alpha snapshots) and will start checking for updates to Console Toolkit, WinWizard, and Word Nav.

IMPORTANT NOTICE for NVDA alpha snapshot users: when trying to upgrade from earlier add-on releases, you will notice that Add-on Updater does not display results and NVDA plays error tones. You can use one of the following workarounds to upgrade to Add-on Updater 21.05:

  1. Download Add-on Updater 21.05 from: https://addons.nvda-project.org/files/get.php?file=nvda3208
  2. Open Python Console (Control+NVDA+Z) then type the following as exactly as shown (press Enter after each line):

import wx

wx.CENTER_ON_SCREEN = 6

 

After that, press Escape and Add-on Updater will present update check results. I advise using the first option as it is easier, and you won’t have to go through manual (or extra) steps in future releases unless the situation changes again.

The above workarounds are not applicable if you are using NVDA 2020.4 or earlier.

Cheers,

Joseph


Is the SAP application accessible using NVDA?

vasu prathap
 
Edited

Hi friends,

Is SAP accessible using NVDA? Do you have any suggestions for manuals or websites on how to access SAP using NVDA? Thank you.


Re: NVDA and Ardour

Sarah k Alawami
 

There is a groups.io list you can look for. They are very helpful there. Also google for the reaper accessibility wiki. Lots of info there.

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Vinod Benjamin
Sent: Sunday, May 2, 2021 9:31 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA and Ardour

Dear team,

Is there any tutorial for Reaper , with NVDA.

it would be great if some one could help me with.

Regards,

Vinod Benjamin

On 5/2/21, Luke Davis <luke@newanswertech.com> wrote:
Shaun Everiss wrote:

Of course you can build this yourself but they simply don't tell you
how to build this for windows.
Though there is this (pay special attention to the comments):
https://discourse.ardour.org/t/building-ardour-on-windows-with-msys2/8
8079

But that said, Shaun is right. Unless Ardour really does something
that just nothing else on the planet can do--and I find that very
unlikely--almost any other solution is going to be preferable to going
down this path.

Try Audacity.
If it's not enough, pay for Reaper. It's worth it in time if not in
features, and it is worth it in features.

Luke






Re: NVDA and Ardour

Vinod Benjamin
 

Dear team,

Is there any tutorial for Reaper , with NVDA.

it would be great if some one could help me with.

Regards,

Vinod Benjamin

On 5/2/21, Luke Davis <luke@newanswertech.com> wrote:
Shaun Everiss wrote:

Of course you can build this yourself but they simply don't tell you how
to build this for windows.
Though there is this (pay special attention to the comments):
https://discourse.ardour.org/t/building-ardour-on-windows-with-msys2/88079

But that said, Shaun is right. Unless Ardour really does something that
just nothing else on the planet can do--and I find that very
unlikely--almost any other solution is going to be preferable to going
down this path.

Try Audacity.
If it's not enough, pay for Reaper. It's worth it in time if not in
features, and it is worth it in features.

Luke






Focus 14 Braille display and NVDA

dennis huckle
 

How do I replicate ctrl N or alt N using a Focus 14 braille display using the latest braille extender add on and latest version of NVDA?

I am new to NVDA groups so want to make sure I am sending to the group to get my question answered and enter further discussions about this excellent screen reader.


Kind regards,

Dennis Huckle

 


Re: NVDA - Missing OneCore Voices on New Laptop

Bill Chilcott
 

Hi Jackie. Thank-you so much for your excellent step by step instructions. I now have all the voices I want. You're a star!
All best wishes.
Bill.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Jackie
Sent: 01 May 2021 05:09 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA - Missing OneCore Voices on New Laptop

Hello, Bill. Please do the folowing:
1) Go to settings (windows key + i) then to 'time & language' & press enter.
2) From there, arrow down to 'speech' & press enter.
3) Tab to the 'add voices' button & activate.
4) Arrow down through the voice languages, press spacebar on the 1 you
want, then tab to the 'add' button & activate it.

On 5/1/21, Bill Chilcott via groups.io
<maybill=btopenworld.com@groups.io> wrote:
Hi Jackie. I'm afraid that didn't work. That only allows me to install one
of the voices that are already in the list, but my problem is the voices I
used to have are not there. So therefore I need to download the extra
voices. Can you give me a step by step guide as to how to do this. Thanks
for your help so far.
Bill.




-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Jackie
Sent: 30 April 2021 05:51 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA - Missing OneCore Voices on New Laptop

A couple things here, Bill.

1) Please go to your synthesizer settings in NVDA & press control +
NVDA key + s, or press NVDA + n > preferences > settings > speech &
then tab to & activate the change button. Either way, you should now
be in the synthesizer dialog.

2) Arrow down to "1 core voices" & press enter.

3)Tab once to voice & choose the 1 you want. Make other changes as
desired. Press ok twice.

Please let us know if that doesn't work for you, as you may need to
install the 1-core voices, & I didn't go over that here.

On 4/30/21, Chris via groups.io <chrismedley=btinternet.com@groups.io>
wrote:
The most obvious thing to try is to restart NVDA and if that doesnt work
then RESTART the laptop

And finally if all else fails then remove and add the voices again



From: Bill Chilcott via groups.io
Sent: 30 April 2021 16:30
To: nvda@nvda.groups.io
Subject: [nvda] NVDA - Missing OneCore Voices on New Laptop

Hi folks. I have just changed my laptop and, on re-installing NVDA
Windows
one core voices, I noticed I have not got David, Susan and Mark. Is there
any way of getting these voices back, especially David, which I used all
the
time? Any help over this would be gratefully appreciated.
Regards, Bill.













--
Subscribe to a WordPress for Newbies Mailing List by sending a message to:
wp4newbs-request@freelists.org with 'subscribe' in the Subject field OR by
visiting the list page at http://www.freelists.org/list/wp4newbs
& check out my sites at www.brightstarsweb.com & www.mysitesbeenhacked.com












--
Subscribe to a WordPress for Newbies Mailing List by sending a message to:
wp4newbs-request@freelists.org with 'subscribe' in the Subject field OR by
visiting the list page at http://www.freelists.org/list/wp4newbs
& check out my sites at www.brightstarsweb.com & www.mysitesbeenhacked.com


Re: Require help to convert image PDFs into text PDF documents

ss sarfudeen
 

Hello list members,

The built-in OCR feature of NVDA doesn't work in this document.

Regards,

Sultana

On 5/2/21, enes sarıbaş <enes.saribas@gmail.com> wrote:
If the image is reasonably good, links convert well. Actuallly I have
clicked on URLs in scanned letters from my mailbox and they work.

On 5/1/2021 3:21 PM, Luke Davis wrote:
enes sarıbaş wrote:

You actually can get images, links and headings ETC. Finereader is
able to do this.
I sit corrected. I have never used that product, so wasn't aware.

Links, as raw http addresses, I can understand. For domain names, it's
easy enough; but when you get to things after the first slash or
question mark, they tend to get hairy, and you are at the mercy of the
recognition engine--one character goes wrong, and poof.

Luke









Re: Require help to convert image PDFs into text PDF documents

 

Hi, i apologize for my mistake above.
It's nvda plus R not nvda plus L as i had earlier stated, thanks
Arvind

No trees were destroyed in the sending of this message, however, a significant number of electrons were terribly inconvenienced.

On 1 May 2021, at 11:19 PM, Dr. arvind singh brar via groups.io <arvindsinghbrar=gmail.com@groups.io> wrote:

Hi; open the document in acrobat reader ; then press nvda key plus L; to OCR it and read the text;hth

No trees were destroyed in the sending of this message, however, a significant number of electrons were terribly inconvenienced.




Re: NVDA and Ardour

Chris Smart
 

Audacity for blind Users:

https://wiki.audacityteam.org/wiki/Audacity_for_blind_users


Reaper Accessibility Wiki:

https://reaperaccessibility.com/index.php/Main_Page


As someone else asked, what can Ardour do that is unique?


Re: Require help to convert image PDFs into text PDF documents

enes sarıbaş
 

If the image is reasonably good, links convert well. Actuallly I have clicked on URLs in scanned letters from my mailbox and they work.

On 5/1/2021 3:21 PM, Luke Davis wrote:
enes sarıbaş wrote:

You actually can get images, links and headings ETC. Finereader is able to do this.
I sit corrected. I have never used that product, so wasn't aware.

Links, as raw http addresses, I can understand. For domain names, it's easy enough; but when you get to things after the first slash or question mark, they tend to get hairy, and you are at the mercy of the recognition engine--one character goes wrong, and poof.

Luke




NVDA and Ardour

 

Hi

Thanks luke for that reply.

From the devs and  dev pages on building ardour on the site it appears that while they support linux and maybe other things they simply refuse to help someone through building anything else sighting that they are to busy.

While thats probably true, their attitude aint good, hand holding I understand, but its almost sounding like we don't care about it, yes its free but unless you want a 10 minute demo, you have to pay to get a build of which is a gpl licenced software package.

Its obvious they begrudgingly built for windows and mac but really don't care about those platforms.

I doubt they care about accessibility and from reading the beta page wouldn't want to associate with them either.


Re: Require help to convert image PDFs into text PDF documents

Luke Davis
 

enes sarıbaş wrote:

You actually can get images, links and headings ETC. Finereader is able to do this.
I sit corrected. I have never used that product, so wasn't aware.

Links, as raw http addresses, I can understand. For domain names, it's easy enough; but when you get to things after the first slash or question mark, they tend to get hairy, and you are at the mercy of the recognition engine--one character goes wrong, and poof.

Luke


Re: NVDA and Ardour

Luke Davis
 

Shaun Everiss wrote:

Of course you can build this yourself but they simply don't tell you how to build this for windows.
Though there is this (pay special attention to the comments):
https://discourse.ardour.org/t/building-ardour-on-windows-with-msys2/88079

But that said, Shaun is right. Unless Ardour really does something that just nothing else on the planet can do--and I find that very unlikely--almost any other solution is going to be preferable to going down this path.

Try Audacity.
If it's not enough, pay for Reaper. It's worth it in time if not in features, and it is worth it in features.

Luke


Re: Require help to convert image PDFs into text PDF documents

enes sarıbaş
 

You actually can get images, links and headings ETC. Finereader is able to do this.

On 4/30/2021 3:00 PM, Luke Davis wrote:
If they really are image PDFs, then you will never get what you want.

If you use OCR software on them (others can suggest what OCR software is best these days; I don't use OCR packages on Windows), you can get some version of the text out of these.
For example, if I process an image PDF through KNFB reader, or one of the network based recognition apps, I can get somewhere between a 70 percent and 95 percent accurate recognition of the contents.

NVDA's built in OCR feature (NVDA+R) can possibly read these one page at a time, although it's not designed for full document recognition.

However you won't get links and headings and all of that. Software simply isn't smart enough to figure out which pictures of text are supposed to become those formatting and connective elements.

Also, while I could be mistaken about this, I don't believe an image PDF can have links.

Lastly, this is not an NVDA problem. You probably want to take this conversation to a general Windows list or the chat subgroup.

Luke

"I have no idea what I'm supposed to do.  I only know what I can do." -James T. Kirk




Re: NVDA and Ardour

 

I have looked at ardour.

The issue is gtk.

Gtk is a linux library, and software made by gtk is not accessible at least not in windows.

Worse to get a copy of this you need to pay for it if you want a full compiled with no limits version.

Of course you can build this yourself but they simply don't tell you how to build this for windows.


I personally wouldn't bother.



On 2/05/2021 1:13 am, Ted Galanos wrote:
I have never heard of Arthur, however, I do provide tutorial services for anyone that wants to learn audacity whether you are a jawsor an NVDA user.

Ted Galanos
713-396-3495
Please consider donating to my ABLE account. 
https://www. ablegifting.com/TX/K9L8A2

On May 1, 2021, at 2:33 AM, Luke Davis <luke@...> wrote:

I have not tried it in a decade, and that was under Linux no less, but I found it very inaccessible at that time. I switched to Audacity, which is also totally free.

But the nice thing about totally free software, is that you can try it for yourself and not lose anything but time.

Luke

"I have no idea what I'm supposed to do.  I only know what I can do." -James T. Kirk






How to set global shortcut keys when using NVDA and MPC-BE together

Rowen Cary
 

Hello,

I'm using MPC-BE to play videos, but sometimes I need to use global shortcuts to control the player. I found the option to set shortcuts in settings and set a shortcut using NVDA's table navigation, but it doesn't seem to work globally.
The checkbox for Global Media Shortcuts is checked, but I think the checkbox only applies to media shortcuts on the keyboard.
Also when setting the shortcut, nvda becomes unresponsive, can I assume this is an accessibility issue with MPC-BE itself? So I have to use the mouse to complete the setting.

Thanks.
 


Re: NVDA - Missing OneCore Voices on New Laptop

 

What I'm about to propose is not NVDA-specific, because this issue is not likely NVDA-specific.  I use MS David and it should "come with" under a correctly functioning Windows 10 installation in "out of the box" state.  That it's not there suggests a Windows 10 corruption of some sort.  And the way I'd try to solve this particular issue with missing voices is, in order:

1. Using SFC (System File Checker) and DISM (Deployment Imaging Servicing and Management) to Repair Windows 8 & 10

2. Doing a Windows 10 Repair Install or Feature Update Using the Windows 10 ISO file

--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

Always remember others may hate you but those who hate you don't win unless you hate them.  And then you destroy yourself.

       ~ Richard M. Nixon

 

1681 - 1700 of 85155