Date   
Re: Windows10.1803 Having to restart NVDA every so often toget it to stay focused?

Pascal Lambert <coccinelle86@...>
 

Steve,

Thank you so much for your help.  It worked, NVDA is more responsive.  I still hear some choking but nothing like before and I have not had to restart NVDA.

Thanks again.

Blessings

Pascal

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gerardo Corripio
Sent: Monday, February 25, 2019 6:51 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Windows10.1803 Having to restart NVDA every so often toget it to stay focused?

 

OK on my Windows10 the Enhancement was at off; I turned off the option within the Advance Tab that says something about controling the device exclusively. Hope this helps some. Thanks for the tips!

 

                                                                                              Enviado desde Correo para Windows 10

 

De: Steve Nutt
Enviado: lunes, 25 de febrero de 2019 03:39 p. m.
Para: nvda@nvda.groups.io
Asunto: Re: [nvda] Windows10.1803 Having to restart NVDA every so often toget it to stay focused?

 

Hi,

 

Other things you might want to uncheck or change.

 

In the Communications tab, set it to Do Nothing.

 

In the Advanced tab, set take exclusive control to unchecked.

 

Now you will probably have a much more responsive synthesiser, and consequently a snappier NVDA.

 

All the best


Steve

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Pascal Lambert
Sent: 25 February 2019 18:28
To: nvda@nvda.groups.io
Subject: Re: [nvda] Windows10.1803 Having to restart NVDA every so often to get it to stay focused?

 

Thanks.  I found it and I unchecked it.  For right now, it is doing ok, will see whether it lasts.  Thanks again.

Blessings

Pascal

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of marcio via Groups.Io
Sent: Monday, February 25, 2019 12:20 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Windows10.1803 Having to restart NVDA every so often to get it to stay focused?

 

Pascal,
If you go to your sounds settings, where you can choose what speaker/microphone to use and such, also there will be a tab called enhancements. It's there, I guess.

Em 25/02/2019 13:57, Pascal Lambert escreveu:

Please, where can I find the audio effect to turn it off?
Thanks
Blessings
Pascal
 
-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Jackie
Sent: Monday, February 25, 2019 11:35 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Windows10.1803 Having to restart NVDA every so often to get it to stay focused?
 
The other thing to check, folks, is whether you have audio effects turned on. This seems to cause NVDA real problems.
 
On 2/25/19, Joseph Lee <joseph.lee22590@...> wrote:
Hi,
 
Does restarting without any add-ons help?
 
Cheers,
 
Joseph
 
 
 
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Pascal 
Lambert
 
Sent: Monday, February 25, 2019 8:28 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Windows10.1803 Having to restart NVDA every so 
often to get it to stay focused?
 
 
 
Hi All,
 
I am having the same problem no matter what voice I am using.  I have 
to restart NVDA so often because is starts stuttering and sputtering 
or goes silent.  This is happening on both my Acer and HP laptops both have 8GB RAM.
This is also happening with the latest version of NVDA and prior versions.
I have on both laptops Windows version 1809 built 17763.  I do not 
believe the problem, is my sound card as I have no problems when I am 
playing music or listening to an E-book. This is getting very 
frustrating.  Your help is greatly appreciated.
 
Blessings
 
Pascal
 
P.S.  I have restarted NVDA 4 times while writing this message!
 
 
 
From: nvda@nvda.groups.io <mailto:nvda@nvda.groups.io> 
[mailto:nvda@nvda.groups.io] On Behalf Of Gerardo Corripio
Sent: Monday, February 25, 2019 11:05 AM
To: nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
Subject: [nvda] Windows10.1803 Having to restart NVDA every so often 
to get it to stay focused?
 
 
 
Lately, I’ve had to restartNVDA every so often, to get it back focused 
on what’s supposed to do; to read the screen! Sometimes I’m working 
along, in apps like Windows10 Mail, Windows Explorer or others, and 
suddenly while arrowing around, it doesn’t read, having to invoke the 
Read Line NVDA+L to read where I’m on in the menú, list or whatever. 
When I restart it (I assigned it a shortcut of nvda+Shift+Control+N, 
it solves itself out, but a few minutes later, the same thing happens! 
Which is kind of starting to drive me crazy! Any ideas?
 
 
 
 
                 Enviado desde Correo
<https://go.microsoft.com/fwlink/?LinkId=550986>  para Windows 10
 
 
 
 
 
 
 
 
 
 
 
--
Subscribe to a WordPress for Newbies Mailing List by sending a message to:
wp4newbs-request@... with 'subscribe' in the Subject field OR by visiting the list page at http://www.freelists.org/list/wp4newbs
& check out my sites at www.brighter-vision.com & www.mysitesbeenhacked.com
 
 
 
 
 
 
 
 

 

 

Re: Differences between using the NVDA and the browser commands search on a webpage

Rui Fontes
 

No, it seems it depends on the page...
I have tested in one of our pages, https://www.tiflotecnia.net/index_addons.html, and it worked...
Now I have made some searchs in Google, and did not worked in any of the pages consulted...

Rui Fontes


Às 12:26 de 26/02/2019, marcio via Groups.Io escreveu:

Rui,
I'm using Firefox and only get anything if using the NVDA search command. Would be it any error from my side?
Cheers,
Marcio
Follow or add me on Facebook <https://facebook.com/firirinfonfon>
Em 26/02/2019 09:23, Rui Fontes escreveu:
The differences are also dependent on the browser used...

In Microsoft Edge, using NVDA+Control+F, or NVDA+F3, it works, but using only Control+F or F3, it announces how many occurrences were found on the page, but it is not possible to go there. It is possible to go near the occurrence, pressing Tab until we get to the page, but we are placed on the next control to the occurrence...

If using Google Chrome, the NVDA commands, NVDA+Control+F or NVDA+F3, work, and the browser commands, Control+F or F3,  also work. You must press Escape after using the browser commands to go to the occurrence found...

In Internet Explorer, the same results.

In Mozilla Firefox, both NVDA and browser commands work...

Tests performed with Windows 10 1809 and last NVDA Alpha...

Rui Fontes





Às 11:42 de 26/02/2019, marcio via Groups.Io escreveu:
I'll have to agree, it seems Travis is the only one who is able to use this CTRL+F command as it should be used.
Still waiting to know what we are doing so wrong to have different results. It's about 3 people having the same result against only one who isn't getting the said.
Well maybe we are out of lucky. Maybe...

Cheers,
Marcio
Follow or add me on Facebook <https://facebook.com/firirinfonfon>

Em 26/02/2019 08:38, Gene escreveu:
I wasn't going to respond to your last message because I hoped that someone who speaks with the authority of a developer would respond. They still may.  I wouldn't have continued to answer when it became clear that you wouldn't believe what I said if we were not on the list. But this is an NVDA list with users who range from beginner to advanced. I shall therefore quote from the manual.  Maybe you will think the manual writers know what they are talking about if you insist that I don't.
I tried using control f during the debate to make absolutely sure it doesn't work in browse mode.  It doesn't. I wasn't moved to the result I was looking for.
From the manual:
Find
NVDA+control+f
Pops up a dialog in which you can type some text to find in the current document
Find next
NVDA+f3
Finds the next occurrence of the text in the document that you previously searched for
Find previous
NVDA+shift+f3
Finds the previous occurrence of the text in the document you previously searched for
If control f could be used, don't you think it would have been stated in the manual and would be the command given?  Why give a command different from the general one used in Windows and Windows programs and a command that requires that an extra key be pressed when simply control f can be used.
Gene


Re: Differences between using the NVDA and the browser commands search on a webpage

 

Rui,
I'm using Firefox and only get anything if using the NVDA search command. Would be it any error from my side?
Em 26/02/2019 09:23, Rui Fontes escreveu:

The differences are also dependent on the browser used...

In Microsoft Edge, using NVDA+Control+F, or NVDA+F3, it works, but using only Control+F or F3, it announces how many occurrences were found on the page, but it is not possible to go there. It is possible to go near the occurrence, pressing Tab until we get to the page, but we are placed on the next control to the occurrence...

If using Google Chrome, the NVDA commands, NVDA+Control+F or NVDA+F3, work, and the browser commands, Control+F or F3,  also work. You must press Escape after using the browser commands to go to the occurrence found...

In Internet Explorer, the same results.

In Mozilla Firefox, both NVDA and browser commands work...

Tests performed with Windows 10 1809 and last NVDA Alpha...

Rui Fontes





Às 11:42 de 26/02/2019, marcio via Groups.Io escreveu:
I'll have to agree, it seems Travis is the only one who is able to use this CTRL+F command as it should be used.
Still waiting to know what we are doing so wrong to have different results. It's about 3 people having the same result against only one who isn't getting the said.
Well maybe we are out of lucky. Maybe...

Cheers,
Marcio
Follow or add me on Facebook <https://facebook.com/firirinfonfon>

Em 26/02/2019 08:38, Gene escreveu:
I wasn't going to respond to your last message because I hoped that someone who speaks with the authority of a developer would respond.  They still may.  I wouldn't have continued to answer when it became clear that you wouldn't believe what I said if we were not on the list.  But this is an NVDA list with users who range from beginner to advanced. I shall therefore quote from the manual.  Maybe you will think the manual writers know what they are talking about if you insist that I don't.
I tried using control f during the debate to make absolutely sure it doesn't work in browse mode.  It doesn't. I wasn't moved to the result I was looking for.
From the manual:
Find
NVDA+control+f
Pops up a dialog in which you can type some text to find in the current document
Find next
NVDA+f3
Finds the next occurrence of the text in the document that you previously searched for
Find previous
NVDA+shift+f3
Finds the previous occurrence of the text in the document you previously searched for
If control f could be used, don't you think it would have been stated in the manual and would be the command given?  Why give a command different from the general one used in Windows and Windows programs and a command that requires that an extra key be pressed when simply control f can be used.
Gene







Re: Differences between using the NVDA and the browser commands search on a webpage

Rui Fontes
 

The differences are also dependent on the browser used...

In Microsoft Edge, using NVDA+Control+F, or NVDA+F3, it works, but using only Control+F or F3, it announces how many occurrences were found on the page, but it is not possible to go there. It is possible to go near the occurrence, pressing Tab until we get to the page, but we are placed on the next control to the occurrence...

If using Google Chrome, the NVDA commands, NVDA+Control+F or NVDA+F3, work, and the browser commands, Control+F or F3, also work. You must press Escape after using the browser commands to go to the occurrence found...

In Internet Explorer, the same results.

In Mozilla Firefox, both NVDA and browser commands work...

Tests performed with Windows 10 1809 and last NVDA Alpha...

Rui Fontes





Às 11:42 de 26/02/2019, marcio via Groups.Io escreveu:

I'll have to agree, it seems Travis is the only one who is able to use this CTRL+F command as it should be used.
Still waiting to know what we are doing so wrong to have different results. It's about 3 people having the same result against only one who isn't getting the said.
Well maybe we are out of lucky. Maybe...
Cheers,
Marcio
Follow or add me on Facebook <https://facebook.com/firirinfonfon>
Em 26/02/2019 08:38, Gene escreveu:
I wasn't going to respond to your last message because I hoped that someone who speaks with the authority of a developer would respond. They still may.  I wouldn't have continued to answer when it became clear that you wouldn't believe what I said if we were not on the list.  But this is an NVDA list with users who range from beginner to advanced. I shall therefore quote from the manual.  Maybe you will think the manual writers know what they are talking about if you insist that I don't.
I tried using control f during the debate to make absolutely sure it doesn't work in browse mode.  It doesn't. I wasn't moved to the result I was looking for.
From the manual:
Find
NVDA+control+f
Pops up a dialog in which you can type some text to find in the current document
Find next
NVDA+f3
Finds the next occurrence of the text in the document that you previously searched for
Find previous
NVDA+shift+f3
Finds the previous occurrence of the text in the document you previously searched for
If control f could be used, don't you think it would have been stated in the manual and would be the command given?  Why give a command different from the general one used in Windows and Windows programs and a command that requires that an extra key be pressed when simply control f can be used.
Gene

Re: Differences between using the NVDA and the browser commands search on a webpage

Gene
 

I have to correct my last message.  I tested again twice more and I wasn't placed where I should have been following the procedure I gave.  So it is inconsistent and it may seldom work as I described.  Using control f won't work consistently and it may seldom do so.
 
Gene
----- original Message -----

From: Gene
Sent: Tuesday, February 26, 2019 5:46 AM
Subject: Re: [nvda] Differences between using the NVDA and the browser commands search on a webpage

Out of curiosity, I just did another test.  I went into forms mode and used control f to search.  I pressed escape after using control f and went back into browse mode.  If you do that, you are on what you searched for.  But that is not how searching in NVDA is intended to be used.  You are intended to stay in browse mode and search using the commands I gave in my last message. 
 
Gene
----- Original Message -----
From: Gene
Sent: Tuesday, February 26, 2019 5:38 AM
Subject: Re: [nvda] Differences between using the NVDA and the browser commands search on a webpage

I wasn't going to respond to your last message because I hoped that someone who speaks with the authority of a developer would respond.  They still may.  I wouldn't have continued to answer when it became clear that you wouldn't believe what I said if we were not on the list.  But this is an NVDA list with users who range from beginner to advanced.  I shall therefore quote from the manual.  Maybe you will think the manual writers know what they are talking about if you insist that I don't.
 
I tried using control f during the debate to make absolutely sure it doesn't work in browse mode.  It doesn't.  I wasn't moved to the result I was looking for. 
 
From the manual:
Find
NVDA+control+f
Pops up a dialog in which you can type some text to find in the current document
Find next
NVDA+f3
Finds the next occurrence of the text in the document that you previously searched for
Find previous
NVDA+shift+f3
Finds the previous occurrence of the text in the document you previously searched for
 
If control f could be used, don't you think it would have been stated in the manual and would be the command given?  Why give a command different from the general one used in Windows and Windows programs and a command that requires that an extra key be pressed when simply control f can be used. 
 
Gene

Re: Differences between using the NVDA and the browser commands search on a webpage

Gene
 

Out of curiosity, I just did another test.  I went into forms mode and used control f to search.  I pressed escape after using control f and went back into browse mode.  If you do that, you are on what you searched for.  But that is not how searching in NVDA is intended to be used.  You are intended to stay in browse mode and search using the commands I gave in my last message. 
 
Gene

----- Original Message -----
From: Gene
Sent: Tuesday, February 26, 2019 5:38 AM
Subject: Re: [nvda] Differences between using the NVDA and the browser commands search on a webpage

I wasn't going to respond to your last message because I hoped that someone who speaks with the authority of a developer would respond.  They still may.  I wouldn't have continued to answer when it became clear that you wouldn't believe what I said if we were not on the list.  But this is an NVDA list with users who range from beginner to advanced.  I shall therefore quote from the manual.  Maybe you will think the manual writers know what they are talking about if you insist that I don't.
 
I tried using control f during the debate to make absolutely sure it doesn't work in browse mode.  It doesn't.  I wasn't moved to the result I was looking for. 
 
From the manual:
Find
NVDA+control+f
Pops up a dialog in which you can type some text to find in the current document
Find next
NVDA+f3
Finds the next occurrence of the text in the document that you previously searched for
Find previous
NVDA+shift+f3
Finds the previous occurrence of the text in the document you previously searched for
 
If control f could be used, don't you think it would have been stated in the manual and would be the command given?  Why give a command different from the general one used in Windows and Windows programs and a command that requires that an extra key be pressed when simply control f can be used. 
 
Gene

Re: Differences between using the NVDA and the browser commands search on a webpage

 

I'll have to agree, it seems Travis is the only one who is able to use this CTRL+F command as it should be used.
Still waiting to know what we are doing so wrong to have different results. It's about 3 people having the same result against only one who isn't getting the said.
Well maybe we are out of lucky. Maybe...

Cheers,
Em 26/02/2019 08:38, Gene escreveu:

I wasn't going to respond to your last message because I hoped that someone who speaks with the authority of a developer would respond.  They still may.  I wouldn't have continued to answer when it became clear that you wouldn't believe what I said if we were not on the list.  But this is an NVDA list with users who range from beginner to advanced.  I shall therefore quote from the manual.  Maybe you will think the manual writers know what they are talking about if you insist that I don't.
 
I tried using control f during the debate to make absolutely sure it doesn't work in browse mode.  It doesn't.  I wasn't moved to the result I was looking for. 
 
From the manual:
Find
NVDA+control+f
Pops up a dialog in which you can type some text to find in the current document
Find next
NVDA+f3
Finds the next occurrence of the text in the document that you previously searched for
Find previous
NVDA+shift+f3
Finds the previous occurrence of the text in the document you previously searched for
 
If control f could be used, don't you think it would have been stated in the manual and would be the command given?  Why give a command different from the general one used in Windows and Windows programs and a command that requires that an extra key be pressed when simply control f can be used. 
 
Gene

Re: Differences between using the NVDA and the browser commands search on a webpage

 

I also would like to know what I'd be doing wrong since I have the very same result on my side.
Please so?
Em 26/02/2019 01:07, Brian Vogel escreveu:

On Mon, Feb 25, 2019 at 10:51 PM, Travis Siegel wrote:
Control-F (which is the standard windows find function), works in browse mode.
I truly am not certain what you mean by "works."   If by that you mean finds the search string, sure.  If you also means gives any meaningful feedback when it does so or starts reading from the instance its sitting on if you start reading, then no.

I get silence, dead silence, using Chrome find in Chrome in browse mode and I've tried it on the Commands Quick Reference page and https://nirsoft.net/ since it's very text intensive.  Also just tried it on https://www.experts-exchange.com/articles/33470/Improve-website-response-times-easily-with-DNS-Settings.html with the same result.

I get nothing but dead silence as the search string is found, and found, and found and cannot make NVDA read from where the browser find has landed.

By contrast, if I use the NVDA find every time I land on the search string it's announced (along with a bit of text around it) and, if I commence reading, it goes from there and takes off.

Please tell me what I'm doing wrong.  I certainly wouldn't tell any of my students that there is an equivalence in behavior between browser find and NVDA find on every webpage on which I've done a comparison.
 
--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763  

A great deal of intelligence can be invested in ignorance when the need for illusion is deep.

          ~ Saul Bellow, To Jerusalem and Back

 

 


Re: Differences between using the NVDA and the browser commands search on a webpage

Gene
 

I wasn't going to respond to your last message because I hoped that someone who speaks with the authority of a developer would respond.  They still may.  I wouldn't have continued to answer when it became clear that you wouldn't believe what I said if we were not on the list.  But this is an NVDA list with users who range from beginner to advanced.  I shall therefore quote from the manual.  Maybe you will think the manual writers know what they are talking about if you insist that I don't.
 
I tried using control f during the debate to make absolutely sure it doesn't work in browse mode.  It doesn't.  I wasn't moved to the result I was looking for. 
 
From the manual:
Find
NVDA+control+f
Pops up a dialog in which you can type some text to find in the current document
Find next
NVDA+f3
Finds the next occurrence of the text in the document that you previously searched for
Find previous
NVDA+shift+f3
Finds the previous occurrence of the text in the document you previously searched for
 
If control f could be used, don't you think it would have been stated in the manual and would be the command given?  Why give a command different from the general one used in Windows and Windows programs and a command that requires that an extra key be pressed when simply control f can be used. 
 
Gene

Re: Hearing "Unknown" when Using a Mouse

Brian's Mail list account <bglists@...>
 

Yes and why cannot a site stick to one sort of combo box? IE the one which works without jumping out for all of them on the page?
Bah humbug.
Brian

bglists@...
Sent via blueyonder.
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Rosemarie Chavarria" <knitqueen2007@...>
To: <nvda@nvda.groups.io>
Sent: Tuesday, February 26, 2019 3:27 AM
Subject: Re: [nvda] Hearing "Unknown" when Using a Mouse


Some forms have radio buttons which allow you to make a choice
whenselecting something. There are also combo boxes.



On 2/25/2019 7:25 PM, Travis Siegel wrote:

When using forms mode, it is expected that some sort of identifying
text will be included with the item needing to be acted upon.
Therefore, some checkboxes might have a title saying it's the yes or
the no check box. If the said text isn't present, then NVDA has no
way to know what the item is refering to, so will only state the
actual item and not what it is supposed to be referring to. This goes
for all gui elements, not just checkboxes.

On 2/25/2019 10:10 PM, bestuiexperience wrote:
I am a software developer trying to develop accessible software. I am
working with some checkboxes that always announce "unknown" before
announcing the label. This occurs only in forms mode and only when
using a mouse (which I understand some NVDA users do). Any clue as to
what might be causing the issue?
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon>
Virus-free. www.avast.com
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=link>


<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

Re: How to Select a Link While n Browse Mode

Brian's Mail list account <bglists@...>
 

I tend to use space bar but then that is just me. I'd be interested in what the page is and if the link is actually in focus , ie was navigated to by the keyboard when you tried to click it. IE if you are in browse mode, use tab or K to get to the link in browse mode, does the link work for you then? Simply cursoring to when you hear the link may be enough out not to be actually on it.
Brian

bglists@...
Sent via blueyonder.
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Rosemarie Chavarria" <knitqueen2007@...>
To: <nvda@nvda.groups.io>
Sent: Tuesday, February 26, 2019 3:14 AM
Subject: Re: [nvda] How to Select a Link While n Browse Mode


Another way to select the link if you can't use enter is to hit shift
enter.



On 2/25/2019 7:12 PM, bestuiexperience wrote:
Sorry, I should have been clear. I am trying to understand how a
keybaord only-NVDA user would select a link while in browse mode, and
whether they would need to switch to forms mode.

Re: messenger?

 

They should, if this was a real goal.
Em 26/02/2019 06:24, Brian's Mail list account via Groups.Io escreveu:

Question, with the current Microsoft  stated aim of getting things more accessible, should they not be testing this fact on  programs they allow into their list on their own store?
Brian

bglists@...
Sent via blueyonder.
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message ----- From: "Lino Morales" <linomorales001@...>
To: <nvda@nvda.groups.io>
Sent: Tuesday, February 26, 2019 12:11 AM
Subject: Re: [nvda] messenger?


Hey bro. There is, but its an inaccessible pile. It’s a MS Store app. Facebook for WIN 10 also in said store is an inaccessible pile also.



Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10



________________________________
From: nvda@nvda.groups.io <nvda@nvda.groups.io> on behalf of Curtis Delzer <curtis@...>
Sent: Monday, February 25, 2019 6:33:44 PM
To: NVDA discussion
Subject: [nvda] messenger?

Hi all, is there a "messenger" app for the pc? You know the one that's
hooked to face book?
---
Curtis Delzer, HS.
WB6HEF
San Bernardino, CA













Re: Staying in Forms for Checkboxes

Brian's Mail list account <bglists@...>
 

There are a lot of issues with forms for me. Sometimes the actual label is not read or the text in a field placed they by the form builder gets read instead but of course goes away as you type. Having played with various permutations of the automatic settings for focus mode I cannot come up with one that suits all occasions, sadly. Jaws seems to have a bit more luck but is not perfect by any means.
Brian

bglists@...
Sent via blueyonder.
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "bestuiexperience" <bestuiexperience@...>
To: <nvda@nvda.groups.io>
Sent: Tuesday, February 26, 2019 3:03 AM
Subject: [nvda] Staying in Forms for Checkboxes


I sometimes find that when I enter a checkbox I automatically get thrown into browse mode. Since I am filling out a form I want to stay in forms mode because when in browse mode I sometimes will get focus completely thrown out of content.
So, 1) Is there a way to keep me in a given mode once I am in it 2) Is there a way to avoid being thrown out of the current element that I am in if I am not in forms mode (e.g., pressing the space bar will throw me out of focus occasionally when I am in forms mode)

Re: messenger?

Brian's Mail list account <bglists@...>
 

Question, with the current Microsoft stated aim of getting things more accessible, should they not be testing this fact on programs they allow into their list on their own store?
Brian

bglists@...
Sent via blueyonder.
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Lino Morales" <linomorales001@...>
To: <nvda@nvda.groups.io>
Sent: Tuesday, February 26, 2019 12:11 AM
Subject: Re: [nvda] messenger?


Hey bro. There is, but its an inaccessible pile. It’s a MS Store app. Facebook for WIN 10 also in said store is an inaccessible pile also.



Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10



________________________________
From: nvda@nvda.groups.io <nvda@nvda.groups.io> on behalf of Curtis Delzer <curtis@...>
Sent: Monday, February 25, 2019 6:33:44 PM
To: NVDA discussion
Subject: [nvda] messenger?

Hi all, is there a "messenger" app for the pc? You know the one that's
hooked to face book?
---
Curtis Delzer, HS.
WB6HEF
San Bernardino, CA

Re: New Moderator #adminnotice

Brian's Mail list account <bglists@...>
 

There at least three Brians here and its not this one!
Brian

bglists@...
Sent via blueyonder.
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Nimer Jaber" <nimerjaber1@...>
To: <nvda@nvda.groups.io>
Sent: Monday, February 25, 2019 7:29 PM
Subject: [nvda] New Moderator #adminnotice


---------- Forwarded message ---------
From: Nimer Jaber <nimerjaber1@...>
Date: Mon, Feb 25, 2019, 10:52
Subject: New Moderator #adminnotice
To: nvda@nvda.groups.io Group Moderators <nvda+owner@nvda.groups.io>


Hello everyone,

This is your friendly list owner writing to thank Brian for stepping up to
fill the moderation position. He is now moderator of this list. I look
forward to working with Brian to hopefully allow this list to continue to
run well. Also, thank you for everyone who has applied as well. I will keep
you in mind should the need arrise for another moderator.

Thanks.

--
Cordially,

Nimer Jaber

Please take the time to read this signature completely as it contains
some information about the email you have just read and all
attachments contained within as well as some valuable resources and
methods for contacting me if you have any questions or wish to talk.

The message above is intended for the recipient to whom it was
addressed. If you believe that you are not the intended recipient,
please notify me via reply email and destroy all copies of this
correspondence. Action taken as a result of this email or its contents
by anyone other than the intended recipient(s) may result in civil or
criminal charges. I have checked this email and all corresponding
attachments for security threats. However, security of your machine is
up to you. Thanks.

Registered Linux User 529141.
http://counter.li.org/

To find out about a free and versatile screen reader for windows XP
and above, please click here:
http://www.nvda-project.org

You can follow @nimerjaber on Twitter for the latest technology news.

To contact me, you can reply to this email or you may call me at (970)
(658-0358) and I will do my best to respond to you promptly. Thank
you, and have a great day!


Re: Test

Albert Ruel
 

Got it.  

Thx, Albert


On Feb 26, 2019, at 1:00 AM, Nimer Jaber <nimerjaber1@...> wrote:

I am attempting to send messages to the list, but it seems that groups.io are rejecting all messages from my e-mail address. So, this is a test.

Re: Test

Nimer Jaber
 

Well that worked, writing to a group of which I am an owner through the web interface... now why can't I send e-mails. Strange.

On Tue, Feb 26, 2019 at 2:00 AM Nimer Jaber via Groups.Io <nimerjaber1=gmail.com@groups.io> wrote:
I am attempting to send messages to the list, but it seems that groups.io are rejecting all messages from my e-mail address. So, this is a test.



--
Cordially,

Nimer Jaber

Please take the time to read this signature completely as it contains
some information about the email you have just read and all
attachments contained within as well as some valuable resources and
methods for contacting me if you have any questions or wish to talk.

The message above is intended for the recipient to whom it was
addressed. If you believe that you are not the intended recipient,
please notify me via reply email and destroy all copies of this
correspondence. Action taken as a result of this email or its contents
by anyone other than the intended recipient(s) may result in civil or
criminal charges. I have checked this email and all corresponding
attachments for security threats. However, security of your machine is
up to you. Thanks.

Registered Linux User 529141.
http://counter.li.org/

To find out about a free and versatile screen reader for windows XP
and above, please click here:
http://www.nvda-project.org

You can follow @nimerjaber on Twitter for the latest technology news.

To contact me, you can reply to this email or you may call me at (970) (658-0358) and I will do my best to respond to you promptly. Thank
you, and have a great day!

Test

Nimer Jaber
 

I am attempting to send messages to the list, but it seems that groups.io are rejecting all messages from my e-mail address. So, this is a test.

Re: Golden Cursor question

Curtis Delzer
 

I'll ask on the Becky forum, thanks, great idea. Wonder why I . . .
didn't think of it. Fascinating how we overlook the obvious.
But I am about certain that the physical mouse double clicked in the
link or the "http" part of the link works because that can be turned off
in the menus, where the ability to do so is stopped.
-----
Curtis Delzer, HS.
WB6HEF
San Bernardino, CA

Re: Thunderbird and trash

Adriano Barbieri
 

Hi,


The checkbox to vouch for folders is activated, the spaxzio is set to 20 megs.

With shift + delete, you delete a message only if it is open, I need to delete a grouped by topic messages grouped all at once.

Unfortunately the problem is not solved.


Il 25/02/2019 21:02, Dejan Ristic ha scritto:

Hi,


Try this:


Open the options menu. Then find Advanced by arrowing down. Tab once, and then arrow down to find network and disk space tab. When done, tab til you hear about compacting being checked. Try unchecking that option and see what may be in store for you.

On 25/02/2019 18:07, Sarah k Alawami wrote:

I often at the end of the month clear messages, I receive about maybe 2-500 or more messages a day so there we go. And that's why google hates me at the end of every year or so.

Take care

On 25 Feb 2019, at 8:56, Rosemarie Chavarria wrote:

I had to compact my trash folder last night and it didn't have thousands of messages.



On 2/25/2019 8:40 AM, Sarah k Alawami wrote:

I've never had this issue. I've removed thousands of messages to the trash and never yet compacted. Knock on wood of corse.

On 25 Feb 2019, at 5:57, Adriano Barbieri via Groups.Io wrote:

Hi to every body,


Version 60.5.1,

I'm forced to compact / empty the basket every 4 or 5 messages deleted, otherwise Thunderbird does not delete others.It only happens to me?

What can be done to solve?

Thanks!


Regards

Adriano



Virus-free. www.avast.com