Date   
Re: Is there an accessible video editor I can use with NVDA?

Sarah k Alawami
 

Thre is but I don't use it. I think the last time I tried as I chose the wrong mp4 container for the thing I wastrying to merge and got a horable noise.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.
For stuff we sell, mac training materials and  tutorials go here.
and for hosting options go here
to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here

On 23 Sep 2019, at 13:07, Angelo Sonnesso wrote:

There is a way that you can merge videos with VLC Media Player.

 

73 N2DYN Angelo

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Sarah k Alawami
Sent: Monday, September 23, 2019 3:39 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Is there an accessible video editor I can use with NVDA?

 

You can trim, but I've never actually managed to merge successfully. If your stuff is in mkv or anything other than m4v or mp4 forget opening it in photoe editor.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.
For stuff we sell, mac training materials and  tutorials go here.
and for hosting options go here
to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here

On 23 Sep 2019, at 11:56, Governor staten wrote:

How well does this app work for editing of videos?

 

 


 

On 9/23/2019 8:07 AM, Andy B. wrote:

Hi,

 

Try Windows 10 Photos app. I use it for video editing all the time.

 

 

Andy Borka

Accessibility Engineer

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Sarah k Alawami
Sent: Monday, September 23, 2019 12:13 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Is there an accessible video editor I can use with NVDA?

 

I actually was going to suggest reaper, as it only takes about an hour to render about 2 hours of content on a good day or rm. but I'm on a mac.

Whe I use reaper it takes 30 minutes to render 2 hours of content on my windows machine, so I'd say it is yrou processer that is barfing.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.
For stuff we sell, mac training materials and  tutorials go here.
and for hosting options go here
to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here

On 22 Sep 2019, at 13:58, Joshua Tubbs wrote:

Hi all,

I have tried open source video editor Shotcut. Opening videos is
accessible and we can move through them, but I'm not sure how to join
videos and/or move segments.

Replay Media Splitter, a program that I thought would be accessible
due to their other products, is not accessible.

So, does anybody know of an accessible way to both remove segments
from video via selection, and also join videos together? Reaper video
rendering is very, very slow and is a deal breaker for me.

Thanks.

Re: Is there an accessible video editor I can use with NVDA?

Angelo Sonnesso
 

There is a way that you can merge videos with VLC Media Player.

 

73 N2DYN Angelo

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Sarah k Alawami
Sent: Monday, September 23, 2019 3:39 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Is there an accessible video editor I can use with NVDA?

 

You can trim, but I've never actually managed to merge successfully. If your stuff is in mkv or anything other than m4v or mp4 forget opening it in photoe editor.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.
For stuff we sell, mac training materials and  tutorials go here.
and for hosting options go here
to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here

On 23 Sep 2019, at 11:56, Governor staten wrote:

How well does this app work for editing of videos?

 

 


 

On 9/23/2019 8:07 AM, Andy B. wrote:

Hi,

 

Try Windows 10 Photos app. I use it for video editing all the time.

 

 

Andy Borka

Accessibility Engineer

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Sarah k Alawami
Sent: Monday, September 23, 2019 12:13 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Is there an accessible video editor I can use with NVDA?

 

I actually was going to suggest reaper, as it only takes about an hour to render about 2 hours of content on a good day or rm. but I'm on a mac.

Whe I use reaper it takes 30 minutes to render 2 hours of content on my windows machine, so I'd say it is yrou processer that is barfing.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.
For stuff we sell, mac training materials and  tutorials go here.
and for hosting options go here
to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here

On 22 Sep 2019, at 13:58, Joshua Tubbs wrote:

Hi all,

I have tried open source video editor Shotcut. Opening videos is
accessible and we can move through them, but I'm not sure how to join
videos and/or move segments.

Replay Media Splitter, a program that I thought would be accessible
due to their other products, is not accessible.

So, does anybody know of an accessible way to both remove segments
from video via selection, and also join videos together? Reaper video
rendering is very, very slow and is a deal breaker for me.

Thanks.

Re: Is there an accessible video editor I can use with NVDA?

Sarah k Alawami
 

You can trim, but I've never actually managed to merge successfully. If your stuff is in mkv or anything other than m4v or mp4 forget opening it in photoe editor.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.
For stuff we sell, mac training materials and  tutorials go here.
and for hosting options go here
to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here

On 23 Sep 2019, at 11:56, Governor staten wrote:

How well does this app work for editing of videos?





On 9/23/2019 8:07 AM, Andy B. wrote:

Hi,

 

Try Windows 10 Photos app. I use it for video editing all the time.

 

 

Andy Borka

Accessibility Engineer

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Sarah k Alawami
Sent: Monday, September 23, 2019 12:13 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Is there an accessible video editor I can use with NVDA?

 

I actually was going to suggest reaper, as it only takes about an hour to render about 2 hours of content on a good day or rm. but I'm on a mac.

Whe I use reaper it takes 30 minutes to render 2 hours of content on my windows machine, so I'd say it is yrou processer that is barfing.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.
For stuff we sell, mac training materials and  tutorials go here.
and for hosting options go here
to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here

On 22 Sep 2019, at 13:58, Joshua Tubbs wrote:

Hi all,

I have tried open source video editor Shotcut. Opening videos is
accessible and we can move through them, but I'm not sure how to join
videos and/or move segments.

Replay Media Splitter, a program that I thought would be accessible
due to their other products, is not accessible.

So, does anybody know of an accessible way to both remove segments
from video via selection, and also join videos together? Reaper video
rendering is very, very slow and is a deal breaker for me.

Thanks.

Re: Is there an accessible video editor I can use with NVDA?

 

How well does this app work for editing of videos?





On 9/23/2019 8:07 AM, Andy B. wrote:

Hi,

 

Try Windows 10 Photos app. I use it for video editing all the time.

 

 

Andy Borka

Accessibility Engineer

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Sarah k Alawami
Sent: Monday, September 23, 2019 12:13 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Is there an accessible video editor I can use with NVDA?

 

I actually was going to suggest reaper, as it only takes about an hour to render about 2 hours of content on a good day or rm. but I'm on a mac.

Whe I use reaper it takes 30 minutes to render 2 hours of content on my windows machine, so I'd say it is yrou processer that is barfing.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.
For stuff we sell, mac training materials and  tutorials go here.
and for hosting options go here
to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here

On 22 Sep 2019, at 13:58, Joshua Tubbs wrote:

Hi all,

I have tried open source video editor Shotcut. Opening videos is
accessible and we can move through them, but I'm not sure how to join
videos and/or move segments.

Replay Media Splitter, a program that I thought would be accessible
due to their other products, is not accessible.

So, does anybody know of an accessible way to both remove segments
from video via selection, and also join videos together? Reaper video
rendering is very, very slow and is a deal breaker for me.

Thanks.

Re: NVDA and accessible kindle book

Mary Otten
 

Well, both advanced type setting and text to speech are enabled for the book, so there goes that theory.


Mary

On 9/23/2019 10:25 AM, John Isige wrote:
I'm guessing somebody already told you. In order for Kindle PC to read
books with a screen reader, it either needs to say it's screen reader
accessible/enabled or whatever they call it, or that it has enhanced
type/typesetting in the book's info. I don't know *why* Amazon set
things up that way, I'm assuming fights with publishers, but I think
that's not the case for some reason with their Kindle apps for mobile
devices. So I suspect what's happening is that this mystery book doesn't
have the required feature enabled, so NVDA can't see it. Of course, I
could be entirely wrong, but that's my guess.


On 9/23/2019 9:40, Mary Otten wrote:
Hi Hope,


If I could choose the sysnthesizer and the speed, I guess I wouldn't
mind letting the Kindle app do the reading. But the synthesizer they
use and the speed with which it reads are both losers in my book. If
the tts within the Kindle application can see the text, and voice over
can see the text, why can't NVDA see it without having to do a page by
page ocr?


Mary

On 9/23/2019 7:07 AM, Hope Williamson wrote:
When I'm reading a Kindle book. I exit NVDA, and let the Kindle do
the reading. Sometimes I start narrator, but it's really unnecessary.

On 9/23/2019 7:01 AM, Mary Otten wrote:
NVDA plus r does yield text. Turning off the synthesizer within the
Kindle app with control t doesn't do anything for nvda, i.e. it
still doesn't read anything. there is obviously text here, or else
the book wouldn't read on my phone. But for whatever reason, NVDA
isn't seeing the text unless you do an ocr. That's not an efficient
way to read a book. I'd sure like to know what's up with Kindle for
pc here.


Mary

On 9/23/2019 3:22 AM, Sile via Groups.Io wrote:
What happens if you use the NVDA key and are to scan the image.
Does it find anything?

Sile
On Sep 22, 2019, at 6:24 PM, Mary Otten <maryotten@...>
wrote:

Hi folks,


This might not turn out to be an NVDA issue, but ...


I use the Kindle for PC with NVDA as well as my phone to read
Kindle books. I just purchased one which, when I open it, a voice
automatically starts reading at a speed that I did not set. It is
apparently the tts that goes into action when the Kindle app
starts reading something, kind of like what happens when you tell
Acrobat reader to read out loud.


In the case of this book, NVDA sees no text at all. All the menus
work. But when I do an insert down to start a read all from the
selected chapter in the table of contents, nothing is read by
NVDA. On my phone using the Voice Over screen reader, this book
reads just fine, thank you very much.


I am aware that there are a few books that you can't read with a
screen reader, period. But this doesn't seem to be one of those,
since it is working fine on my phone. Is there some setting I'm
missing that would allow me to use NVDA and my preferred voice and
speed over the speech that comes from the Kindle program itself?


Mary






Re: NVDA and accessible kindle book

John Isige
 

I'm guessing somebody already told you. In order for Kindle PC to read
books with a screen reader, it either needs to say it's screen reader
accessible/enabled or whatever they call it, or that it has enhanced
type/typesetting in the book's info. I don't know *why* Amazon set
things up that way, I'm assuming fights with publishers, but I think
that's not the case for some reason with their Kindle apps for mobile
devices. So I suspect what's happening is that this mystery book doesn't
have the required feature enabled, so NVDA can't see it. Of course, I
could be entirely wrong, but that's my guess.

On 9/23/2019 9:40, Mary Otten wrote:
Hi Hope,


If I could choose the sysnthesizer and the speed, I guess I wouldn't
mind letting the Kindle app do the reading. But the synthesizer they
use and the speed with which it reads are both losers in my book. If
the tts within the Kindle application can see the text, and voice over
can see the text, why can't NVDA see it without having to do a page by
page ocr?


Mary

On 9/23/2019 7:07 AM, Hope Williamson wrote:
When I'm reading a Kindle book. I exit NVDA, and let the Kindle do
the reading. Sometimes I start narrator, but it's really unnecessary.

On 9/23/2019 7:01 AM, Mary Otten wrote:
NVDA plus r does yield text. Turning off the synthesizer within the
Kindle app with control t doesn't do anything for nvda, i.e. it
still doesn't read anything. there is obviously text here, or else
the book wouldn't read on my phone. But for whatever reason, NVDA
isn't seeing the text unless you do an ocr. That's not an efficient
way to read a book. I'd sure like to know what's up with Kindle for
pc here.


Mary

On 9/23/2019 3:22 AM, Sile via Groups.Io wrote:
What happens if you use the NVDA key and are to scan the image.
Does it find anything?

Sile
On Sep 22, 2019, at 6:24 PM, Mary Otten <maryotten@...>
wrote:

Hi folks,


This might not turn out to be an NVDA issue, but ...


I use the Kindle for PC with NVDA as well as my phone to read
Kindle books. I just purchased one which, when I open it, a voice
automatically starts reading at a speed that I did not set. It is
apparently the tts that goes into action when the Kindle app
starts reading something, kind of like what happens when you tell
Acrobat reader to read out loud.


In the case of this book, NVDA sees no text at all. All the menus
work. But when I do an insert down to start a read all from the
selected chapter in the table of contents, nothing is read by
NVDA. On my phone using the Voice Over screen reader, this book
reads just fine, thank you very much.


I am aware that there are a few books that you can't read with a
screen reader, period. But this doesn't seem to be one of those,
since it is working fine on my phone. Is there some setting I'm
missing that would allow me to use NVDA and my preferred voice and
speed over the speech that comes from the Kindle program itself?


Mary





Re: THE WEATHER 7.1 ADDON

Chris Mullins
 

Hi
More than one what?

Cheers
Chris

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Lenron
Sent: 23 September 2019 14:54
To: nvda@nvda.groups.io
Subject: Re: [nvda] THE WEATHER 7.1 ADDON

I hate to chime in on this post asking this question, but where can I
find that cool little addon that allows me to update more than one at
a time.

On 9/23/19, Chris Mullins <cjmullins29@...> wrote:
Hi Steve

To view/change synthesizers, the command NVDA+Control+s will open the Select
synthesizer dialog. Use NVDA+Control+v to open the speech dialog in which
you can select the voice you want. (you can also change synth in this dialog
too). The WeatherPlus addon only voices the weather forecast, it doesn’t
present it in a dialog box. If you have set the option to put the weather
forcast on the clipboard, open a text file and try pasting from clipboard.




Cheers

Chris

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Stephen
Thacker
Sent: 23 September 2019 10:26
To: nvda@nvda.groups.io
Subject: Re: [nvda] THE WEATHER 7.1 ADDON



Hi, I don’t know, it was the one that I installed when first installing
NVDA. If I need to know please tell me how to find out the synthesiser?



Cheers, Steve



Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for Windows
10



From: Chris Mullins <mailto:cjmullins29@...>
Sent: 23 September 2019 09:26
To: nvda@nvda.groups.io
Subject: Re: [nvda] THE WEATHER 7.1 ADDON



Hi Steve

What synthesizer are you using?



Cheers

Chris



From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Stephen
Thacker
Sent: 23 September 2019 02:09
To: nvda@nvda.groups.io
Subject: Re: [nvda] THE WEATHER 7.1 ADDON



Hi, I have setup the Weather Plus with my city and all the other options I
wish to be read within the forecast. However when I press NVDA key with w
nothing happens at all so what is the remedy please?



Thanks for any help, Steveh



Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for Windows
10



From: Chris Mullins <mailto:cjmullins29@...>
Sent: 22 September 2019 22:38
To: nvda@nvda.groups.io
Subject: Re: [nvda] THE WEATHER 7.1 ADDON



Hi

Once you have set a location, the most frequently used commands are

NVDA+w to read todays forecast

NVDA+Shift+w to read forecast for up to the next 9 days



If you try pressing NVDA+w and you get an error saying the WOE Id is
missing, you need to set a location, as follows:



1. Open the NVDA menu using NVDA+n

2. Press the letter p to open the preferences sub-menu

3. Press the letter s until you find “Weather Plus Settings sub-menu s”, and
press enter

4. Press the letter m to open the “Set and manage your cities” dialog box.

5. in the edit box, type in your location and postcode in the form CityName,
PostCode

6. Tab to and press "test" button.

7 if the location is valid you can hear a beep , tab to the details button
and press it to read the location details.

8. you can set the location as the Preset default or simply add to your
list using the appropriate buttons

9. Tab through the other controls, checking options you want to include in
the forecast for your location.

10. When done, tab to OK and press enter



If you want to learn more about the other features of Weather_Plus you must
read the readme.html file you find on the

nvda menu, preferences submenu, weather plus settings, documentation.



Cheers

Chris



From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Stephen
Thacker
Sent: 22 September 2019 19:19
To: nvda@nvda.groups.io
Subject: [nvda] THE WEATHER 7.1 ADDON



Hi, when I arrived home late last night, Saturday, I switched on my pc which
uses Windows 10 64 bit and the latest version of NVDA and it asked me if I
wanted to upgrade from 7.0 to 7.1. I have now the latest version on my pc,
but how do I use this addon, ie what keys do I press to get results please?



Thanks for any help, Steve Thacker from the UK.



Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for Windows
10













--
Lenron Brown
Cell: 985-271-2832
Skype: ron.brown762

Re: NVDA and accessible kindle book

Mary Otten
 

Hi Hope,


If I could choose the sysnthesizer and the speed, I guess I wouldn't mind letting the Kindle app do the reading. But the synthesizer they use and the speed with which it reads are both losers in my book. If the tts within the Kindle application can see the text, and voice over can see the text, why can't NVDA see it without having to do a page by page ocr?


Mary

On 9/23/2019 7:07 AM, Hope Williamson wrote:
When I'm reading a Kindle book. I exit NVDA, and let the Kindle do the reading. Sometimes I start narrator, but it's really unnecessary.

On 9/23/2019 7:01 AM, Mary Otten wrote:
NVDA plus r does yield text. Turning off the synthesizer within the Kindle app with control t doesn't do anything for nvda, i.e. it still doesn't read anything. there is obviously text here, or else the book wouldn't read on my phone. But for whatever reason, NVDA isn't seeing the text unless you do an ocr. That's not an efficient way to read a book. I'd sure like to know what's up with Kindle for pc here.


Mary

On 9/23/2019 3:22 AM, Sile via Groups.Io wrote:
What happens if you use the NVDA key and are to scan the image. Does it find anything?

Sile
On Sep 22, 2019, at 6:24 PM, Mary Otten <maryotten@...> wrote:

Hi folks,


This might not turn out to be an NVDA issue, but ...


I use the Kindle for PC with NVDA as well as my phone to read Kindle books. I just purchased one which, when I open it, a voice automatically starts reading at a speed that I did not set. It is apparently the tts that goes into action when the Kindle app starts reading something, kind of like what happens when you tell Acrobat reader to read out loud.


In the case of this book, NVDA sees no text at all. All the menus work. But when I do an insert down to start a read all from the selected chapter in the table of contents, nothing is read by NVDA. On my phone using the Voice Over screen reader, this book reads just fine, thank you very much.


I am aware that there are a few books that you can't read with a screen reader, period. But this doesn't seem to be one of those, since it is working fine on my phone. Is there some setting I'm missing that would allow me to use NVDA and my preferred voice and speed over the speech that comes from the Kindle program itself?


Mary




Re: NVDA and accessible kindle book

Hope Williamson <hopeisjoyful@...>
 

When I'm reading a Kindle book. I exit NVDA, and let the Kindle do the reading. Sometimes I start narrator, but it's really unnecessary.

On 9/23/2019 7:01 AM, Mary Otten wrote:
NVDA plus r does yield text. Turning off the synthesizer within the Kindle app with control t doesn't do anything for nvda, i.e. it still doesn't read anything. there is obviously text here, or else the book wouldn't read on my phone. But for whatever reason, NVDA isn't seeing the text unless you do an ocr. That's not an efficient way to read a book. I'd sure like to know what's up with Kindle for pc here.


Mary

On 9/23/2019 3:22 AM, Sile via Groups.Io wrote:
What happens if you use the NVDA key and are to scan the image. Does it find anything?

Sile
On Sep 22, 2019, at 6:24 PM, Mary Otten <maryotten@...> wrote:

Hi folks,


This might not turn out to be an NVDA issue, but ...


I use the Kindle for PC with NVDA as well as my phone to read Kindle books. I just purchased one which, when I open it, a voice automatically starts reading at a speed that I did not set. It is apparently the tts that goes into action when the Kindle app starts reading something, kind of like what happens when you tell Acrobat reader to read out loud.


In the case of this book, NVDA sees no text at all. All the menus work. But when I do an insert down to start a read all from the selected chapter in the table of contents, nothing is read by NVDA. On my phone using the Voice Over screen reader, this book reads just fine, thank you very much.


I am aware that there are a few books that you can't read with a screen reader, period. But this doesn't seem to be one of those, since it is working fine on my phone. Is there some setting I'm missing that would allow me to use NVDA and my preferred voice and speed over the speech that comes from the Kindle program itself?


Mary



Re: NVDA and accessible kindle book

Mary Otten
 

NVDA plus r does yield text. Turning off the synthesizer within the Kindle app with control t doesn't do anything for nvda, i.e. it still doesn't read anything. there is obviously text here, or else the book wouldn't read on my phone. But for whatever reason, NVDA isn't seeing the text unless you do an ocr. That's not an efficient way to read a book. I'd sure like to know what's up with Kindle for pc here.


Mary

On 9/23/2019 3:22 AM, Sile via Groups.Io wrote:
What happens if you use the NVDA key and are to scan the image. Does it find anything?

Sile
On Sep 22, 2019, at 6:24 PM, Mary Otten <maryotten@...> wrote:

Hi folks,


This might not turn out to be an NVDA issue, but ...


I use the Kindle for PC with NVDA as well as my phone to read Kindle books. I just purchased one which, when I open it, a voice automatically starts reading at a speed that I did not set. It is apparently the tts that goes into action when the Kindle app starts reading something, kind of like what happens when you tell Acrobat reader to read out loud.


In the case of this book, NVDA sees no text at all. All the menus work. But when I do an insert down to start a read all from the selected chapter in the table of contents, nothing is read by NVDA. On my phone using the Voice Over screen reader, this book reads just fine, thank you very much.


I am aware that there are a few books that you can't read with a screen reader, period. But this doesn't seem to be one of those, since it is working fine on my phone. Is there some setting I'm missing that would allow me to use NVDA and my preferred voice and speed over the speech that comes from the Kindle program itself?


Mary



Re: THE WEATHER 7.1 ADDON

Lenron
 

I hate to chime in on this post asking this question, but where can I
find that cool little addon that allows me to update more than one at
a time.

On 9/23/19, Chris Mullins <cjmullins29@...> wrote:
Hi Steve

To view/change synthesizers, the command NVDA+Control+s will open the Select
synthesizer dialog. Use NVDA+Control+v to open the speech dialog in which
you can select the voice you want. (you can also change synth in this dialog
too). The WeatherPlus addon only voices the weather forecast, it doesn’t
present it in a dialog box. If you have set the option to put the weather
forcast on the clipboard, open a text file and try pasting from clipboard.




Cheers

Chris

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Stephen
Thacker
Sent: 23 September 2019 10:26
To: nvda@nvda.groups.io
Subject: Re: [nvda] THE WEATHER 7.1 ADDON



Hi, I don’t know, it was the one that I installed when first installing
NVDA. If I need to know please tell me how to find out the synthesiser?



Cheers, Steve



Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for Windows
10



From: Chris Mullins <mailto:cjmullins29@...>
Sent: 23 September 2019 09:26
To: nvda@nvda.groups.io
Subject: Re: [nvda] THE WEATHER 7.1 ADDON



Hi Steve

What synthesizer are you using?



Cheers

Chris



From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Stephen
Thacker
Sent: 23 September 2019 02:09
To: nvda@nvda.groups.io
Subject: Re: [nvda] THE WEATHER 7.1 ADDON



Hi, I have setup the Weather Plus with my city and all the other options I
wish to be read within the forecast. However when I press NVDA key with w
nothing happens at all so what is the remedy please?



Thanks for any help, Steveh



Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for Windows
10



From: Chris Mullins <mailto:cjmullins29@...>
Sent: 22 September 2019 22:38
To: nvda@nvda.groups.io
Subject: Re: [nvda] THE WEATHER 7.1 ADDON



Hi

Once you have set a location, the most frequently used commands are

NVDA+w to read todays forecast

NVDA+Shift+w to read forecast for up to the next 9 days



If you try pressing NVDA+w and you get an error saying the WOE Id is
missing, you need to set a location, as follows:



1. Open the NVDA menu using NVDA+n

2. Press the letter p to open the preferences sub-menu

3. Press the letter s until you find “Weather Plus Settings sub-menu s”, and
press enter

4. Press the letter m to open the “Set and manage your cities” dialog box.

5. in the edit box, type in your location and postcode in the form CityName,
PostCode

6. Tab to and press "test" button.

7 if the location is valid you can hear a beep , tab to the details button
and press it to read the location details.

8. you can set the location as the Preset default or simply add to your
list using the appropriate buttons

9. Tab through the other controls, checking options you want to include in
the forecast for your location.

10. When done, tab to OK and press enter



If you want to learn more about the other features of Weather_Plus you must
read the readme.html file you find on the

nvda menu, preferences submenu, weather plus settings, documentation.



Cheers

Chris



From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Stephen
Thacker
Sent: 22 September 2019 19:19
To: nvda@nvda.groups.io
Subject: [nvda] THE WEATHER 7.1 ADDON



Hi, when I arrived home late last night, Saturday, I switched on my pc which
uses Windows 10 64 bit and the latest version of NVDA and it asked me if I
wanted to upgrade from 7.0 to 7.1. I have now the latest version on my pc,
but how do I use this addon, ie what keys do I press to get results please?



Thanks for any help, Steve Thacker from the UK.



Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for Windows
10












--
Lenron Brown
Cell: 985-271-2832
Skype: ron.brown762

Re: Is there an accessible video editor I can use with NVDA?

Andy B.
 

Hi,

 

Try Windows 10 Photos app. I use it for video editing all the time.

 

 

Andy Borka

Accessibility Engineer

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Sarah k Alawami
Sent: Monday, September 23, 2019 12:13 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Is there an accessible video editor I can use with NVDA?

 

I actually was going to suggest reaper, as it only takes about an hour to render about 2 hours of content on a good day or rm. but I'm on a mac.

Whe I use reaper it takes 30 minutes to render 2 hours of content on my windows machine, so I'd say it is yrou processer that is barfing.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.
For stuff we sell, mac training materials and  tutorials go here.
and for hosting options go here
to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here

On 22 Sep 2019, at 13:58, Joshua Tubbs wrote:

Hi all,

I have tried open source video editor Shotcut. Opening videos is
accessible and we can move through them, but I'm not sure how to join
videos and/or move segments.

Replay Media Splitter, a program that I thought would be accessible
due to their other products, is not accessible.

So, does anybody know of an accessible way to both remove segments
from video via selection, and also join videos together? Reaper video
rendering is very, very slow and is a deal breaker for me.

Thanks.

Re: Weather_Plus7.1 update available

Betsy Grenevitch
 

I did all of that. There were no other files under temp.


Betsy from Georgia


On 9/23/2019 6:06 AM, Adriano Barbieri via Groups.Io wrote:

Hi Chris,


No, it overwrites it.
The error in Betsy's log indicated lines not consistent with the reported error, which I remember already having solved some time ago in some previous version.
I don't know how it is possible, but surely, without knowing it, it is using an old version even if it says to read that it is 7.1.
This is why I advised you to uninstall it and clean% temp from every old add-on file.

Regards
Adriano


Il 23/09/2019 10:47, Chris Mullins ha scritto:

Hi Adriano

Could the problem be anything to do with the weather.ini or weather.zipcodes because I note these files are in the Appdata\Roaming\NVDA folder, so are used by all versions?  If weather.ini from an old version did not get removed, would the creation of weather.ini from a new install create weather(1).ini?        

 

Cheers

Chris

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Adriano Barbieri via Groups.Io
Sent: 23 September 2019 01:59
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather_Plus7.1 update available

 

Hi Betsy, I'm sorry, the link was distorted by the next text, here's the correct one:

http://www.nvda.it/files/plugin/weather_plus7.1.nvda-addon

 

Regards

Adriano

 

 

Il 23/09/2019 00:10, Betsy Grenevitch ha scritto:

The link you took me too is not fully in English so I have no idea where the download link is located. There were no other instances of Weather Plus, however.

I deleted the add-on, though.

 

Betsy from Georgia

 

-- 
Betsy Grenevitch
678=862-3876

Re: excel and headers not working as intended

Robert Doc Wright godfearer
 

Sally, I just did what you described and it works for me. My question is where are you when you begin navigating? Tell us what your starting point and in which direction are you moving?

 

******If we can't look at ourselves, and ask, why?  then where does the learning start?***     

 

From: Quentin Christensen
Sent: Sunday, September 22, 2019 4:32 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] excel and headers not working as intended

 

Hi Sally,

 

From what you described, what you are doing and what we suggested should normally work.  If you can send me offlist a copy of the spreadsheet you are using, I can have a look at that.  If you let me know which lesson in the material you are working on, I can double check that they are in fact correct.

 

Kind regards

 

Quentin.

 

On Sat, Sep 21, 2019 at 1:40 AM Sally Kiebdaj <fiddle.pup@...> wrote:

I am aware of both these points and they do not address the issues I am having. Any other suggestions?

 

Regards,

Sally

 

On Thu, Sep 19, 2019 at 6:15 PM Quentin Christensen <quentin@...> wrote:

The other thing to note is that column headers are only announced as you move left or right (between columns), and row headers are only announced as you change rows.  If you have column headers set and press the down arrow - the column hasn't changed so the header isn't read again.

 

Regards

 

Quentin.

 

On Fri, Sep 20, 2019 at 7:21 AM George Kerscher <kerscher@...> wrote:

Hi,

You also need to check the tables , which is the one just before the column and row.

Best
George

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Sally Kiebdaj
Sent: Thursday, September 19, 2019 3:01 PM
To: nvda@nvda.groups.io
Subject: [nvda] excel and headers not working as intended

Hello all,

I don't see anything describing my situation in recent conversations so
am starting a new thread.

I'm going through the NVDA excel training and have found that when
following the precise directions in the training, headers are not
reading as it says they should.

I have a set of cells with data. I go to the start of the row that I
want to use as column headers and press NVDA+shift+c.

NVDA announces A2 set as start of column headers. This is correct.

However that header is not read when I navigate through the table.

If I repeat the set column header hotkey, it says that the cell is
already set as the column header. If I press it twice rapidly it says
that the column header is removed.

Everything works as it should right up until I actually start navigating
the table data and do not hear headers spoken.

I am using NVDA 19.2, MS excel 1908 most recent build.

Has anyone else seen this problem? Am I missing something in settings? I
do have the table information checkbox for headers selected in the
document settings of NVDA.

If the instructions in the excel tutorial are missing a step it would be
good to correct that as well.

Thank you in advance for help troubleshooting this.

Warmly,
Sally








 

--

Quentin Christensen
Training and Support Manager

 


 

--

Quentin Christensen
Training and Support Manager

 

 

Re: THE WEATHER 7.1 ADDON

Chris Mullins
 

Hi Steve

To view/change synthesizers, the command NVDA+Control+s will open the Select synthesizer dialog.  Use NVDA+Control+v to open the speech dialog in which you can select the voice you want. (you can also change synth in this dialog too).  The WeatherPlus addon only voices the weather forecast, it doesn’t present it in a dialog box.  If you have set the option to put the weather forcast on the clipboard, open a text file and try pasting from clipboard.       

 

Cheers

Chris

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Stephen Thacker
Sent: 23 September 2019 10:26
To: nvda@nvda.groups.io
Subject: Re: [nvda] THE WEATHER 7.1 ADDON

 

Hi, I don’t know, it was the one that I installed when first installing NVDA. If I need to know please tell me how to find out the synthesiser?

 

Cheers, Steve

 

Sent from Mail for Windows 10

 

From: Chris Mullins
Sent: 23 September 2019 09:26
To: nvda@nvda.groups.io
Subject: Re: [nvda] THE WEATHER 7.1 ADDON

 

Hi Steve

What synthesizer are you using?

 

Cheers

Chris

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Stephen Thacker
Sent: 23 September 2019 02:09
To: nvda@nvda.groups.io
Subject: Re: [nvda] THE WEATHER 7.1 ADDON

 

Hi, I have setup the Weather Plus with my city and all the other options I wish to be read within the forecast. However when I press NVDA key with w nothing happens at all so what is the remedy please?

 

Thanks for any help, Steveh

 

Sent from Mail for Windows 10

 

From: Chris Mullins
Sent: 22 September 2019 22:38
To: nvda@nvda.groups.io
Subject: Re: [nvda] THE WEATHER 7.1 ADDON

 

Hi

Once you have set a location, the most frequently used commands are

NVDA+w to read todays forecast

NVDA+Shift+w to read forecast for up to the next 9 days

 

If you try pressing NVDA+w and you get an error saying the WOE Id is missing, you need to set a location, as follows:

 

1. Open the NVDA menu using NVDA+n

2. Press the letter p to open the preferences sub-menu

3. Press the letter s until you find “Weather Plus Settings sub-menu s”, and press enter

4. Press the letter m to open the “Set and manage your cities” dialog box.

5. in the edit box, type in your location and postcode in the form CityName, PostCode

6. Tab to and press "test" button.

7 if the location is valid you can hear a beep , tab to the details button and press it to read the location details.

8. you can set the location as  the Preset default or simply add to your list using the appropriate buttons

9. Tab through the other controls, checking options you want to include in the forecast for your location.

10. When done, tab to OK and press enter

 

If you want to learn more about the other features of Weather_Plus you must read the readme.html file you find on the

nvda menu, preferences submenu, weather plus settings, documentation.

 

Cheers

Chris

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Stephen Thacker
Sent: 22 September 2019 19:19
To: nvda@nvda.groups.io
Subject: [nvda] THE WEATHER 7.1 ADDON

 

Hi, when I arrived home late last night, Saturday, I switched on my pc which uses Windows 10 64 bit and the latest version of NVDA and it asked me if I wanted to upgrade from 7.0 to 7.1. I have now the latest version on my pc, but how do I use this addon, ie what keys do I press to get results please?

 

Thanks for any help, Steve Thacker from the UK.

 

Sent from Mail for Windows 10

 

 

 

Re: THE WEATHER 7.1 ADDON

Stephen Thacker
 

Hi, yes that’s right, it says absolutely nothing. What do you think I should do. I can get the internet forecast for my home town, Long Eaton whereas for The Weather Plus 7.1 I had to choose my city, Nottingham from a list which had a number of US cities before I found the UK one and installed as directed.

 

Cheers, Steve

 

Sent from Mail for Windows 10

 

From: Adriano Barbieri via Groups.Io
Sent: 23 September 2019 11:04
To: nvda@nvda.groups.io
Subject: Re: [nvda] THE WEATHER 7.1 ADDON

 

Hi Stephen,

 

I mean if you press nvda + w does it say absolutely nothing?
Does it also happen with other combinations?
If you activate the input help with nvda + 1 that tells you by pressing the combination nvda + w?

Are you sure there isn't another add-on that uses the same combination?

Thanks

 

Regards

Adriano

 

Il 23/09/2019 03:09, Stephen Thacker ha scritto:

Hi, I have setup the Weather Plus with my city and all the other options I wish to be read within the forecast. However when I press NVDA key with w nothing happens at all so what is the remedy please?

 

Thanks for any help, Steve

 

Sent from Mail for Windows 10

 

From: Chris Mullins
Sent: 22 September 2019 22:38
To: nvda@nvda.groups.io
Subject: Re: [nvda] THE WEATHER 7.1 ADDON

 

Hi

Once you have set a location, the most frequently used commands are

NVDA+w to read todays forecast

NVDA+Shift+w to read forecast for up to the next 9 days

 

If you try pressing NVDA+w and you get an error saying the WOE Id is missing, you need to set a location, as follows:

 

1. Open the NVDA menu using NVDA+n

2. Press the letter p to open the preferences sub-menu

3. Press the letter s until you find “Weather Plus Settings sub-menu s”, and press enter

4. Press the letter m to open the “Set and manage your cities” dialog box.

5. in the edit box, type in your location and postcode in the form CityName, PostCode

6. Tab to and press "test" button.

7 if the location is valid you can hear a beep , tab to the details button and press it to read the location details.

8. you can set the location as  the Preset default or simply add to your list using the appropriate buttons

9. Tab through the other controls, checking options you want to include in the forecast for your location.

10. When done, tab to OK and press enter

 

If you want to learn more about the other features of Weather_Plus you must read the readme.html file you find on the

nvda menu, preferences submenu, weather plus settings, documentation.

 

Cheers

Chris

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Stephen Thacker
Sent: 22 September 2019 19:19
To: nvda@nvda.groups.io
Subject: [nvda] THE WEATHER 7.1 ADDON

 

Hi, when I arrived home late last night, Saturday, I switched on my pc which uses Windows 10 64 bit and the latest version of NVDA and it asked me if I wanted to upgrade from 7.0 to 7.1. I have now the latest version on my pc, but how do I use this addon, ie what keys do I press to get results please?

 

Thanks for any help, Steve Thacker from the UK.

 

Sent from Mail for Windows 10

 

 

 

Re: NVDA and accessible kindle book

Sile
 

What happens if you use the NVDA key and are to scan the image. Does it find anything?

Sile

On Sep 22, 2019, at 6:24 PM, Mary Otten <maryotten@...> wrote:

Hi folks,


This might not turn out to be an NVDA issue, but ...


I use the Kindle for PC with NVDA as well as my phone to read Kindle books. I just purchased one which, when I open it, a voice automatically starts reading at a speed that I did not set. It is apparently the tts that goes into action when the Kindle app starts reading something, kind of like what happens when you tell Acrobat reader to read out loud.


In the case of this book, NVDA sees no text at all. All the menus work. But when I do an insert down to start a read all from the selected chapter in the table of contents, nothing is read by NVDA. On my phone using the Voice Over screen reader, this book reads just fine, thank you very much.


I am aware that there are a few books that you can't read with a screen reader, period. But this doesn't seem to be one of those, since it is working fine on my phone. Is there some setting I'm missing that would allow me to use NVDA and my preferred voice and speed over the speech that comes from the Kindle program itself?


Mary



Re: ALVA 544 Satellite Traveller braille display with NVDA

Oriana
 

Thanks for the response, Gene! I've gone ahead and ordered a female rs-232 to usb cable. Seems like it is going to take a while to get here, so I'll post again when we try it out.


On Mon, Sep 23, 2019, 3:05 AM hurrikennyandopo ... <hurrikennyandopo@...> wrote:

Hi,


RE: RS-232 to USB 2.0 cable for a braille display.

Sorry about that, I just realised that I hadn't emailed you the link I promised from Ebay!

Anyhow, this guy sells both the female cable and the male cable. On the back of my braille note it is a male connection, so I bought the female RS-232 to USB 2.0 cable to go on there.

It also came with a driver mini CD which works on my Windows 10 operating system.

I just use it as a braille display, rather than a note taker.

Here is the link https://www.ebay.com/itm/RS-232-Serial-to-USB-2-0-PL2303-Cable-Adapter-Converter-For-Win-7-8-MAC-OS-AU/143028406760?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649


I know that when I enquired here at PBTech (in New Zealand) they only had a male RS-232 to USB cable, but apparently I could have bought an adapter for $10 to change it to female.


I have just had another quick look on Ebay for you. It seems that they also sell the RS-232 gender changers if you wanted to adapt the cable you already have. Sometimes though it is just as easy to get the proper cable already done. I have been happy with the ones that I purchased. They are also nice and long.

Regards,

Gene


On 23/09/2019 8:31 AM, o.neulinger@... wrote:

Gene from New Zealand, were you able to find that link?

the cable you mentioned that is serial to USb the 2 I brought come with a driver CD that also supports windows 10 that I am using now. It can be brought off ebay for under 10 bucks new zealand with free shipping. I can post a link later on today to one that I got
--
Image NVDA
        certified expert
Check out my website for NVDA tutorials and other blindness related materials at http://www.accessibilitycentral.net

To find out which library networks in New Zealand have a copy of the NVDA screen reader on them and there library locations please go to http://www.accessibilitycentral.net/nz%20libraries%20with%20nvda.html
To find a NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.

Re: Weather_Plus7.1 update available

Adriano Barbieri
 

Hi Chris,


No, it overwrites it.
The error in Betsy's log indicated lines not consistent with the reported error, which I remember already having solved some time ago in some previous version.
I don't know how it is possible, but surely, without knowing it, it is using an old version even if it says to read that it is 7.1.
This is why I advised you to uninstall it and clean% temp from every old add-on file.

Regards
Adriano


Il 23/09/2019 10:47, Chris Mullins ha scritto:

Hi Adriano

Could the problem be anything to do with the weather.ini or weather.zipcodes because I note these files are in the Appdata\Roaming\NVDA folder, so are used by all versions?  If weather.ini from an old version did not get removed, would the creation of weather.ini from a new install create weather(1).ini?        

 

Cheers

Chris

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Adriano Barbieri via Groups.Io
Sent: 23 September 2019 01:59
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather_Plus7.1 update available

 

Hi Betsy, I'm sorry, the link was distorted by the next text, here's the correct one:

http://www.nvda.it/files/plugin/weather_plus7.1.nvda-addon

 

Regards

Adriano

 

 

Il 23/09/2019 00:10, Betsy Grenevitch ha scritto:

The link you took me too is not fully in English so I have no idea where the download link is located. There were no other instances of Weather Plus, however.

I deleted the add-on, though.

 

Betsy from Georgia

 

Re: THE WEATHER 7.1 ADDON

Adriano Barbieri
 

Hi Stephen,


I mean if you press nvda + w does it say absolutely nothing?
Does it also happen with other combinations?
If you activate the input help with nvda + 1 that tells you by pressing the combination nvda + w?

Are you sure there isn't another add-on that uses the same combination?

Thanks


Regards

Adriano


Il 23/09/2019 03:09, Stephen Thacker ha scritto:

Hi, I have setup the Weather Plus with my city and all the other options I wish to be read within the forecast. However when I press NVDA key with w nothing happens at all so what is the remedy please?

 

Thanks for any help, Steve

 

Sent from Mail for Windows 10

 

From: Chris Mullins
Sent: 22 September 2019 22:38
To: nvda@nvda.groups.io
Subject: Re: [nvda] THE WEATHER 7.1 ADDON

 

Hi

Once you have set a location, the most frequently used commands are

NVDA+w to read todays forecast

NVDA+Shift+w to read forecast for up to the next 9 days

 

If you try pressing NVDA+w and you get an error saying the WOE Id is missing, you need to set a location, as follows:

 

1. Open the NVDA menu using NVDA+n

2. Press the letter p to open the preferences sub-menu

3. Press the letter s until you find “Weather Plus Settings sub-menu s”, and press enter

4. Press the letter m to open the “Set and manage your cities” dialog box.

5. in the edit box, type in your location and postcode in the form CityName, PostCode

6. Tab to and press "test" button.

7 if the location is valid you can hear a beep , tab to the details button and press it to read the location details.

8. you can set the location as  the Preset default or simply add to your list using the appropriate buttons

9. Tab through the other controls, checking options you want to include in the forecast for your location.

10. When done, tab to OK and press enter

 

If you want to learn more about the other features of Weather_Plus you must read the readme.html file you find on the

nvda menu, preferences submenu, weather plus settings, documentation.

 

Cheers

Chris

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Stephen Thacker
Sent: 22 September 2019 19:19
To: nvda@nvda.groups.io
Subject: [nvda] THE WEATHER 7.1 ADDON

 

Hi, when I arrived home late last night, Saturday, I switched on my pc which uses Windows 10 64 bit and the latest version of NVDA and it asked me if I wanted to upgrade from 7.0 to 7.1. I have now the latest version on my pc, but how do I use this addon, ie what keys do I press to get results please?

 

Thanks for any help, Steve Thacker from the UK.

 

Sent from Mail for Windows 10