|
Hi, I am new to this list and I hope someone can help me. I would like to learn how to use Station playlist as I am a complete novice and I would like to use Station playlist studio to record my own podcasts, I am however unable to find a clear tutorial which explains how to do this. I am using the latest version of NVDA. Can you help? -- Warm regards, Claire Potter, Check out my brand new website: http://www.pottersplace.me.uk/
|
|
|
Hi Claire,
Welcome to NVDA list.
Sorry to say the following as a reply to your first post, but do you have a source who told you StationPlaylist Studio can be used for creating podcasts? Studio is mostly meant for producing pre-recorded or live shows on air, not necessarily used for podcast production (for that, there are programs such as Audacity, GoldWave, and many others).
I'll ask some folks I know who uses StationPlaylist Studio regarding this possibility.
Cheers,
Joseph
toggle quoted message
Show quoted text
-----Original Message----- From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Claire Potter Sent: Tuesday, July 10, 2018 7:31 AM To: nvda@nvda.groups.io Subject: [nvda] Using Station playlist with the latest version of NVDA Hi, I am new to this list and I hope someone can help me. I would like to learn how to use Station playlist as I am a complete novice and I would like to use Station playlist studio to record my own podcasts, I am however unable to find a clear tutorial which explains how to do this. I am using the latest version of NVDA. Can you help? -- Warm regards, Claire Potter, Check out my brand new website: http://www.pottersplace.me.uk/
|
|
|
Claire Potter <claire.potter99@...>
Hi Joseph, it was a friend who used to use it a little while ago, I can’t remember what exactly she said but it was something like if it was used to produce pre-recorded shows those are then saved as MP3 files which I can edit as if they were podcasts, like I said though, I am quite new to the whole world of audio editing and production etc so I can’t quite remember what she said. Warm regards, Claire Potter, Check out my brand new website: http://www.pottersplace.me.uk/
On 10/07/2018 16:12, Joseph Lee wrote: Hi Claire,
Welcome to NVDA list.
Sorry to say the following as a reply to your first post, but do you have a source who told you StationPlaylist Studio can be used for creating podcasts? Studio is mostly meant for producing pre-recorded or live shows on air, not necessarily used for podcast production (for that, there are programs such as Audacity, GoldWave, and many others).
I'll ask some folks I know who uses StationPlaylist Studio regarding this possibility.
Cheers,
Joseph
-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Claire Potter
Sent: Tuesday, July 10, 2018 7:31 AM
To: nvda@nvda.groups.io
Subject: [nvda] Using Station playlist with the latest version of NVDA
Hi, I am new to this list and I hope someone can help me. I would like to learn how to use Station playlist as I am a complete novice and I would like to use Station playlist studio to record my own podcasts, I am however unable to find a clear tutorial which explains how to do this. I am using the latest version of NVDA. Can you help? -- Warm regards, Claire Potter, Check out my brand new website: http://www.pottersplace.me.uk/
|
|
|
Hi,
Yes, you can use StationPlaylist Studio for pre-recording shows (a bit involved), but you may need a different program for editing the file afterwards.
Just so we can help you better: are you a new NVDA user, a new Studio user, or both? If both, then I suggest learning NVDA first so you can get an idea as to how to use the screen reader before using Studio. Once you become comfortable with NVDA, then I suggest learning how to use Studio so you can use its features efficiently.
There is as NVDA add-on (similar to scripts for other screen readers) that makes improvements to how NVDA interacts with Studio, but that's getting way ahead of the broadcast.
Cheers,
Joseph
toggle quoted message
Show quoted text
-----Original Message----- From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Claire Potter Sent: Tuesday, July 10, 2018 8:30 AM To: nvda@nvda.groups.io Subject: Re: [nvda] Using Station playlist with the latest version of NVDA Hi Joseph, it was a friend who used to use it a little while ago, I can’t remember what exactly she said but it was something like if it was used to produce pre-recorded shows those are then saved as MP3 files which I can edit as if they were podcasts, like I said though, I am quite new to the whole world of audio editing and production etc so I can’t quite remember what she said. Warm regards, Claire Potter, Check out my brand new website: http://www.pottersplace.me.uk/On 10/07/2018 16:12, Joseph Lee wrote: Hi Claire,
Welcome to NVDA list.
Sorry to say the following as a reply to your first post, but do you have a source who told you StationPlaylist Studio can be used for creating podcasts? Studio is mostly meant for producing pre-recorded or live shows on air, not necessarily used for podcast production (for that, there are programs such as Audacity, GoldWave, and many others).
I'll ask some folks I know who uses StationPlaylist Studio regarding this possibility.
Cheers,
Joseph
-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Claire
Potter
Sent: Tuesday, July 10, 2018 7:31 AM
To: nvda@nvda.groups.io
Subject: [nvda] Using Station playlist with the latest version of NVDA
Hi, I am new to this list and I hope someone can help me. I would like
to learn how to use Station playlist as I am a complete novice and I
would like to use Station playlist studio to record my own podcasts, I
am however unable to find a clear tutorial which explains how to do
this. I am using the latest version of NVDA. Can you help? -- Warm
regards, Claire Potter, Check out my brand new website:
http://www.pottersplace.me.uk/
|
|
|
Claire Potter <claire.potter99@...>
Hi Joseph, I have used NVDA for about 6 months now, I would not by any means call myself an expert yet but I am quite confident in using it, so it is just Studio and editing programs that I am new to. My friend did say that I can’t edit in Studio itself, so that is maybe where something like Audacity or even Total recorder would come in. I do have Total recorder and I really like using that for simple editing tasks, so for example if I have a file that is 30 minutes long but I wanted to select a section to remove it is really simple to do that, that is about as far as I currently go with editing, but I would like to take it to the next level! Warm regards, Claire Potter, Check out my brand new website: http://www.pottersplace.me.uk/
On 10/07/2018 16:37, Joseph Lee wrote: Hi,
Yes, you can use StationPlaylist Studio for pre-recording shows (a bit involved), but you may need a different program for editing the file afterwards.
Just so we can help you better: are you a new NVDA user, a new Studio user, or both? If both, then I suggest learning NVDA first so you can get an idea as to how to use the screen reader before using Studio. Once you become comfortable with NVDA, then I suggest learning how to use Studio so you can use its features efficiently.
There is as NVDA add-on (similar to scripts for other screen readers) that makes improvements to how NVDA interacts with Studio, but that's getting way ahead of the broadcast.
Cheers,
Joseph
-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Claire Potter
Sent: Tuesday, July 10, 2018 8:30 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Using Station playlist with the latest version of NVDA
Hi Joseph, it was a friend who used to use it a little while ago, I can’t remember what exactly she said but it was something like if it was used to produce pre-recorded shows those are then saved as MP3 files which I can edit as if they were podcasts, like I said though, I am quite new to the whole world of audio editing and production etc so I can’t quite remember what she said.
Warm regards, Claire Potter, Check out my brand new website: http://www.pottersplace.me.uk/
On 10/07/2018 16:12, Joseph Lee wrote:
Hi Claire,
Welcome to NVDA list.
Sorry to say the following as a reply to your first post, but do you have a source who told you StationPlaylist Studio can be used for creating podcasts? Studio is mostly meant for producing pre-recorded or live shows on air, not necessarily used for podcast production (for that, there are programs such as Audacity, GoldWave, and many others).
I'll ask some folks I know who uses StationPlaylist Studio regarding this possibility.
Cheers,
Joseph
-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Claire
Potter
Sent: Tuesday, July 10, 2018 7:31 AM
To: nvda@nvda.groups.io
Subject: [nvda] Using Station playlist with the latest version of NVDA
Hi, I am new to this list and I hope someone can help me. I would like
to learn how to use Station playlist as I am a complete novice and I
would like to use Station playlist studio to record my own podcasts, I
am however unable to find a clear tutorial which explains how to do
this. I am using the latest version of NVDA. Can you help? -- Warm
regards, Claire Potter, Check out my brand new website:
http://www.pottersplace.me.uk/
|
|
|
I, I see. In this case, let me refer you to a mailing list where you can meet broadcasters using studio: https://nvda-spl.groups.io/g/nvda-splAlthough the mailing list is meant for users of StationPlaylist NVDA add-on, it could also serve as a resource for beginners as members of that are broadcasters using NVDA and Studio. Cheers, Joseph
-----Original Message----- From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Claire Potter Sent: Tuesday, July 10, 2018 8:46 AM To: nvda@nvda.groups.io Subject: Re: [nvda] Using Station playlist with the latest version of NVDA Hi Joseph, I have used NVDA for about 6 months now, I would not by any means call myself an expert yet but I am quite confident in using it, so it is just Studio and editing programs that I am new to. My friend did say that I can’t edit in Studio itself, so that is maybe where something like Audacity or even Total recorder would come in. I do have Total recorder and I really like using that for simple editing tasks, so for example if I have a file that is 30 minutes long but I wanted to select a section to remove it is really simple to do that, that is about as far as I currently go with editing, but I would like to take it to the next level! Warm regards, Claire Potter, Check out my brand new website: http://www.pottersplace.me.uk/On 10/07/2018 16:37, Joseph Lee wrote: Hi,
Yes, you can use StationPlaylist Studio for pre-recording shows (a bit involved), but you may need a different program for editing the file afterwards.
Just so we can help you better: are you a new NVDA user, a new Studio user, or both? If both, then I suggest learning NVDA first so you can get an idea as to how to use the screen reader before using Studio. Once you become comfortable with NVDA, then I suggest learning how to use Studio so you can use its features efficiently.
There is as NVDA add-on (similar to scripts for other screen readers) that makes improvements to how NVDA interacts with Studio, but that's getting way ahead of the broadcast.
Cheers,
Joseph
-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Claire
Potter
Sent: Tuesday, July 10, 2018 8:30 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Using Station playlist with the latest version of
NVDA
Hi Joseph, it was a friend who used to use it a little while ago, I can’t remember what exactly she said but it was something like if it was used to produce pre-recorded shows those are then saved as MP3 files which I can edit as if they were podcasts, like I said though, I am quite new to the whole world of audio editing and production etc so I can’t quite remember what she said.
Warm regards, Claire Potter, Check out my brand new website:
http://www.pottersplace.me.uk/
On 10/07/2018 16:12, Joseph Lee wrote:
Hi Claire,
Welcome to NVDA list.
Sorry to say the following as a reply to your first post, but do you have a source who told you StationPlaylist Studio can be used for creating podcasts? Studio is mostly meant for producing pre-recorded or live shows on air, not necessarily used for podcast production (for that, there are programs such as Audacity, GoldWave, and many others).
I'll ask some folks I know who uses StationPlaylist Studio regarding this possibility.
Cheers,
Joseph
-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Claire
Potter
Sent: Tuesday, July 10, 2018 7:31 AM
To: nvda@nvda.groups.io
Subject: [nvda] Using Station playlist with the latest version of
NVDA
Hi, I am new to this list and I hope someone can help me. I would
like to learn how to use Station playlist as I am a complete novice
and I would like to use Station playlist studio to record my own
podcasts, I am however unable to find a clear tutorial which explains
how to do this. I am using the latest version of NVDA. Can you help?
-- Warm regards, Claire Potter, Check out my brand new website:
http://www.pottersplace.me.uk/
|
|
|
What do you want to do? Do you want to
produce a simple podcast with just you talking and perhaps a little music at
times or something much more complex? I haven't used the program being
discussed. But there are a lot of recording programs. Since you are
new to recording, the first thing to do is find out just what you want to
do. all sorts of recording programs can save files as MP3. It's the
most widely used digital audio format and any standard recording program has a
save as MP3 option.
Gene
toggle quoted message
Show quoted text
----- Original Message -----
Sent: Tuesday, July 10, 2018 10:30 AM
Subject: Re: [nvda] Using Station playlist with the latest version
of NVDA
Hi Joseph, it was a friend who used to use it a little while ago,
I can’t remember what exactly she said but it was something like if it was
used to produce pre-recorded shows those are then saved as MP3 files
which I can edit as if they were podcasts, like I said though, I am
quite new to the whole world of audio editing and production etc so I
can’t quite remember what she said. Warm regards, Claire Potter,
Check out my brand new website: http://www.pottersplace.me.uk/On
10/07/2018 16:12, Joseph Lee wrote: > Hi Claire, > Welcome to NVDA
list. > Sorry to say the following as a reply to your first post, but do
you have a source who told you StationPlaylist Studio can be used for creating
podcasts? Studio is mostly meant for producing pre-recorded or live shows on
air, not necessarily used for podcast production (for that, there are programs
such as Audacity, GoldWave, and many others). > I'll ask some folks I know
who uses StationPlaylist Studio regarding this possibility. >
Cheers, > Joseph > > -----Original Message----- > From:
nvda@nvda.groups.io < nvda@nvda.groups.io> On Behalf Of
Claire Potter > Sent: Tuesday, July 10, 2018 7:31 AM > To: nvda@nvda.groups.io> Subject:
[nvda] Using Station playlist with the latest version of NVDA > >
Hi, I am new to this list and I hope someone can help me. I would like to learn
how to use Station playlist as I am a complete novice and I would like to
use Station playlist studio to record my own podcasts, I am however unable to
find a clear tutorial which explains how to do this. I am using the latest
version of NVDA. Can you help? -- Warm regards, Claire Potter, Check out
my brand new website: http://www.pottersplace.me.uk/> > > > > >
>
|
|
|
Does Microsoft’s Recorder that comes in accessories keep recording until you stop it?
In older versions of Windows, it only recorded for something like 30 seconds.
But it is very easy to use and Microsoft has built-in keyboard commands for it.
I haven’t used it for a long time, but for something as simple as a podcast, it might be the simplest program to use.
Glenn
toggle quoted message
Show quoted text
From: nvda@nvda.groups.io <nvda@nvda.groups.io>
On Behalf Of Gene
Sent: Tuesday, July 10, 2018 10:51 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Using Station playlist with the latest version of NVDA
What do you want to do? Do you want to produce a simple podcast with just you talking and perhaps a little music at times or something much more complex? I haven't used the
program being discussed. But there are a lot of recording programs. Since you are new to recording, the first thing to do is find out just what you want to do. all sorts of recording programs can save files as MP3. It's the most widely used digital audio
format and any standard recording program has a save as MP3 option.
----- Original Message -----
Sent: Tuesday, July 10, 2018 10:30 AM
Subject: Re: [nvda] Using Station playlist with the latest version
of NVDA
Hi Joseph, it was a friend who used to use it a little while ago, I
can’t remember what exactly she said but it was something like if it was
used to produce pre-recorded shows those are then saved as MP3 files
which I can edit as if they were podcasts, like I said though, I am
quite new to the whole world of audio editing and production etc so I
can’t quite remember what she said.
Warm regards, Claire Potter, Check out my brand new website:
http://www.pottersplace.me.uk/
On 10/07/2018 16:12, Joseph Lee wrote:
> Hi Claire,
> Welcome to NVDA list.
> Sorry to say the following as a reply to your first post, but do you have a source who told you StationPlaylist Studio can be used for creating podcasts? Studio is mostly meant for producing pre-recorded or live shows on air, not necessarily used for podcast
production (for that, there are programs such as Audacity, GoldWave, and many others).
> I'll ask some folks I know who uses StationPlaylist Studio regarding this possibility.
> Cheers,
> Joseph
>
> -----Original Message-----
> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Claire Potter
> Sent: Tuesday, July 10, 2018 7:31 AM
> To: nvda@nvda.groups.io
> Subject: [nvda] Using Station playlist with the latest version of NVDA
>
> Hi, I am new to this list and I hope someone can help me. I would like to learn how to use Station playlist as I am a complete novice and I would like to use Station playlist studio to record my own podcasts, I am however unable to find a clear tutorial
which explains how to do this. I am using the latest version of NVDA. Can you help? -- Warm regards, Claire Potter, Check out my brand new website:
http://www.pottersplace.me.uk/
>
>
>
>
>
>
>
|
|
|
Claire Potter <claire.potter99@...>
Hi, yes that's exactly what I want to do, a podcast that is
mainly talking with some jingles and some music.
Warm regards, Claire Potter, Check out my brand new website: http://www.pottersplace.me.uk/
On 10/07/2018 16:51, Gene wrote:
toggle quoted message
Show quoted text
What do you want to do? Do you want to produce a simple
podcast with just you talking and perhaps a little music at
times or something much more complex? I haven't used the
program being discussed. But there are a lot of recording
programs. Since you are new to recording, the first thing to do
is find out just what you want to do. all sorts of recording
programs can save files as MP3. It's the most widely used
digital audio format and any standard recording program has a
save as MP3 option.
Gene
----- Original Message -----
Sent: Tuesday, July 10, 2018 10:30 AM
Subject: Re: [nvda] Using Station playlist with
the latest version of NVDA
Hi Joseph, it was a friend who used to use it a little while ago,
I
can’t remember what exactly she said but it was something like if
it was
used to produce pre-recorded shows those are then saved as MP3
files
which I can edit as if they were podcasts, like I said though, I
am
quite new to the whole world of audio editing and production etc
so I
can’t quite remember what she said.
Warm regards, Claire Potter, Check out my brand new website: http://www.pottersplace.me.uk/
On 10/07/2018 16:12, Joseph Lee wrote:
> Hi Claire,
> Welcome to NVDA list.
> Sorry to say the following as a reply to your first post, but
do you have a source who told you StationPlaylist Studio can be
used for creating podcasts? Studio is mostly meant for producing
pre-recorded or live shows on air, not necessarily used for
podcast production (for that, there are programs such as Audacity,
GoldWave, and many others).
> I'll ask some folks I know who uses StationPlaylist Studio
regarding this possibility.
> Cheers,
> Joseph
>
> -----Original Message-----
> From: nvda@nvda.groups.io <nvda@nvda.groups.io>
On Behalf Of Claire Potter
> Sent: Tuesday, July 10, 2018 7:31 AM
> To: nvda@nvda.groups.io
> Subject: [nvda] Using Station playlist with the latest
version of NVDA
>
> Hi, I am new to this list and I hope someone can help me. I
would like to learn how to use Station playlist as I am a complete
novice and I would like to use Station playlist studio to record
my own podcasts, I am however unable to find a clear tutorial
which explains how to do this. I am using the latest version of
NVDA. Can you help? -- Warm regards, Claire Potter, Check out my
brand new website: http://www.pottersplace.me.uk/
>
>
>
>
>
>
>
|
|
|
What is the next level? Are you editing an
mp3 file and then saving it again as an MP3 file? Every time you edit a
file and then reencode it while saving, you lose audio quality. Either do
all your editing in a lossless format such as wave, then save the final file as
MP3, or edit an existing mp3 file using a program like MP3 Direct Cut, which
edits existing MP3 files and saves the edited file without reencoding it.
If you edit and save an MP3 file reencoding it every time, after three or four
saves, you will start to hear significant audio degredation.
There may be other things you should know as the
discussion continues about how to decide if you want to edit in a lossless
format and save the entire file as an MP3 as the last save or use a program like
MP3 Direct Cut.
For now, basics such as just what you want to do
would be the place to begin.
If you edit an MP3 file using a program like MP3
Direct Cut, you may introduce artifacts, depending on how the recording program
recorded it. You can use a recording program that eliminates this
problem. I'm saying that here so you know you have that
option.
Gene
toggle quoted message
Show quoted text
----- Original Message -----
Sent: Tuesday, July 10, 2018 10:45 AM
Subject: Re: [nvda] Using Station playlist with the latest version
of NVDA
Hi Joseph, I have used NVDA for about 6 months now, I would not
by any means call myself an expert yet but I am quite confident in using it, so
it is just Studio and editing programs that I am new to. My friend did say that
I can’t edit in Studio itself, so that is maybe where something like
Audacity or even Total recorder would come in. I do have Total recorder and I
really like using that for simple editing tasks, so for example if I have a file
that is 30 minutes long but I wanted to select a section to remove it is really
simple to do that, that is about as far as I currently go with editing, but I
would like to take it to the next level! Warm regards, Claire Potter,
Check out my brand new website: http://www.pottersplace.me.uk/On
10/07/2018 16:37, Joseph Lee wrote: > Hi, > Yes, you can use
StationPlaylist Studio for pre-recording shows (a bit involved), but you may
need a different program for editing the file afterwards. > Just so we can
help you better: are you a new NVDA user, a new Studio user, or both? If both,
then I suggest learning NVDA first so you can get an idea as to how to use the
screen reader before using Studio. Once you become comfortable with NVDA, then I
suggest learning how to use Studio so you can use its features
efficiently. > There is as NVDA add-on (similar to scripts for other
screen readers) that makes improvements to how NVDA interacts with Studio, but
that's getting way ahead of the broadcast. > Cheers, >
Joseph > > -----Original Message----- > From: nvda@nvda.groups.io < nvda@nvda.groups.io> On Behalf Of
Claire Potter > Sent: Tuesday, July 10, 2018 8:30 AM > To: nvda@nvda.groups.io> Subject: Re:
[nvda] Using Station playlist with the latest version of NVDA > > Hi
Joseph, it was a friend who used to use it a little while ago, I can’t remember
what exactly she said but it was something like if it was used to produce
pre-recorded shows those are then saved as MP3 files which I can edit as if they
were podcasts, like I said though, I am quite new to the whole world of audio
editing and production etc so I can’t quite remember what she
said. > > Warm regards, Claire Potter, Check out my brand new
website: http://www.pottersplace.me.uk/> >
On 10/07/2018 16:12, Joseph Lee wrote: >> Hi Claire, >>
Welcome to NVDA list. >> Sorry to say the following as a reply to your
first post, but do you have a source who told you StationPlaylist Studio can be
used for creating podcasts? Studio is mostly meant for producing pre-recorded or
live shows on air, not necessarily used for podcast production (for that, there
are programs such as Audacity, GoldWave, and many others). >> I'll ask
some folks I know who uses StationPlaylist Studio regarding this
possibility. >> Cheers, >> Joseph >> >>
-----Original Message----- >> From: nvda@nvda.groups.io < nvda@nvda.groups.io> On Behalf Of
Claire >> Potter >> Sent: Tuesday, July 10, 2018 7:31
AM >> To: nvda@nvda.groups.io>> Subject:
[nvda] Using Station playlist with the latest version of
NVDA >> >> Hi, I am new to this list and I hope someone can
help me. I would like >> to learn how to use Station playlist as I am a
complete novice and I >> would like to use Station playlist studio to
record my own podcasts, I >> am however unable to find a clear tutorial
which explains how to do >> this. I am using the latest version of
NVDA. Can you help? -- Warm >> regards, Claire Potter, Check out
my brand new website: >> http://www.pottersplace.me.uk/>> >> >> >> >> >> >> > > > > >
>
|
|
|
It records in WMA. You can't stop and then
append. It is not a program anyone but someone who wants to do the very
most simple thing, push a button, record, push a button and stop, would
use. That's all it does.
Gene
toggle quoted message
Show quoted text
----- Original Message -----
Sent: Tuesday, July 10, 2018 10:54 AM
Subject: Re: [nvda] Using Station playlist with the latest version
of NVDA
Does
Microsoft’s Recorder that comes in accessories keep recording until you stop
it?
In
older versions of Windows, it only recorded for something like 30
seconds.
But
it is very easy to use and Microsoft has built-in keyboard commands for
it.
I
haven’t used it for a long time, but for something as simple as a podcast, it
might be the simplest program to use.
Glenn
From: nvda@nvda.groups.io
<nvda@nvda.groups.io> On Behalf Of Gene
Sent: Tuesday,
July 10, 2018 10:51 AM
To: nvda@nvda.groups.io
Subject: Re:
[nvda] Using Station playlist with the latest version of
NVDA
What do you want to
do? Do you want to produce a simple podcast with just you talking and
perhaps a little music at times or something much more complex? I haven't
used the program being discussed. But there are a lot of recording
programs. Since you are new to recording, the first thing to do is find
out just what you want to do. all sorts of recording programs can save
files as MP3. It's the most widely used digital audio format and any
standard recording program has a save as MP3 option.
----- Original Message
-----
Sent: Tuesday, July 10,
2018 10:30 AM
Subject: Re: [nvda] Using
Station playlist with the latest version of
NVDA
Hi Joseph, it was a friend who
used to use it a little while ago, I
can’t remember what exactly she said
but it was something like if it was
used to produce pre-recorded shows those
are then saved as MP3 files
which I can edit as if they were podcasts, like
I said though, I am
quite new to the whole world of audio editing and
production etc so I
can’t quite remember what she said.
Warm regards,
Claire Potter, Check out my brand new website: http://www.pottersplace.me.uk/
On
10/07/2018 16:12, Joseph Lee wrote:
> Hi Claire,
> Welcome to NVDA
list.
> Sorry to say the following as a reply to your first post, but do
you have a source who told you StationPlaylist Studio can be used for creating
podcasts? Studio is mostly meant for producing pre-recorded or live shows on
air, not necessarily used for podcast production (for that, there are programs
such as Audacity, GoldWave, and many others).
> I'll ask some folks I know
who uses StationPlaylist Studio regarding this possibility.
>
Cheers,
> Joseph
>
> -----Original Message-----
> From:
nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of
Claire Potter
> Sent: Tuesday, July 10, 2018 7:31 AM
> To: nvda@nvda.groups.io
> Subject:
[nvda] Using Station playlist with the latest version of NVDA
>
>
Hi, I am new to this list and I hope someone can help me. I would like to learn
how to use Station playlist as I am a complete novice and I would like to
use Station playlist studio to record my own podcasts, I am however unable to
find a clear tutorial which explains how to do this. I am using the latest
version of NVDA. Can you help? -- Warm regards, Claire Potter, Check out
my brand new website: http://www.pottersplace.me.uk/
>
>
>
>
>
>
>
|
|
|
Claire Potter <claire.potter99@...>
Hi Gene, you have totally confused me now, I just want to be able
to remove bits of audio which do not need to be there, and add in
the jingles and music at the appropriate times.
Warm regards, Claire Potter, Check out my brand new website: http://www.pottersplace.me.uk/
On 10/07/2018 16:58, Gene wrote:
toggle quoted message
Show quoted text
What is the next level? Are you editing an mp3 file and then
saving it again as an MP3 file? Every time you edit a file and
then reencode it while saving, you lose audio quality. Either
do all your editing in a lossless format such as wave, then save
the final file as MP3, or edit an existing mp3 file using a
program like MP3 Direct Cut, which edits existing MP3 files and
saves the edited file without reencoding it. If you edit and
save an MP3 file reencoding it every time, after three or four
saves, you will start to hear significant audio degredation.
There may be other things you should know as the discussion
continues about how to decide if you want to edit in a lossless
format and save the entire file as an MP3 as the last save or
use a program like MP3 Direct Cut.
For now, basics such as just what you want to do would be the
place to begin.
If you edit an MP3 file using a program like MP3 Direct Cut,
you may introduce artifacts, depending on how the recording
program recorded it. You can use a recording program that
eliminates this problem. I'm saying that here so you know you
have that option.
Gene
----- Original Message -----
Sent: Tuesday, July 10, 2018 10:45 AM
Subject: Re: [nvda] Using Station playlist with
the latest version of NVDA
Hi Joseph, I have used NVDA for about 6 months now, I would not by
any means call myself an expert yet but I am quite confident in
using it, so it is just Studio and editing programs that I am new
to. My friend did say that I can’t edit in Studio itself, so that
is maybe where something like Audacity or even Total recorder
would come in. I do have Total recorder and I really like using
that for simple editing tasks, so for example if I have a file
that is 30 minutes long but I wanted to select a section to remove
it is really simple to do that, that is about as far as I
currently go with editing, but I would like to take it to the next
level! Warm regards, Claire Potter, Check out my brand new
website: http://www.pottersplace.me.uk/
On 10/07/2018 16:37, Joseph Lee wrote:
> Hi,
> Yes, you can use StationPlaylist Studio for pre-recording
shows (a bit involved), but you may need a different program for
editing the file afterwards.
> Just so we can help you better: are you a new NVDA user, a
new Studio user, or both? If both, then I suggest learning NVDA
first so you can get an idea as to how to use the screen reader
before using Studio. Once you become comfortable with NVDA, then I
suggest learning how to use Studio so you can use its features
efficiently.
> There is as NVDA add-on (similar to scripts for other screen
readers) that makes improvements to how NVDA interacts with
Studio, but that's getting way ahead of the broadcast.
> Cheers,
> Joseph
>
> -----Original Message-----
> From: nvda@nvda.groups.io <nvda@nvda.groups.io>
On Behalf Of Claire Potter
> Sent: Tuesday, July 10, 2018 8:30 AM
> To: nvda@nvda.groups.io
> Subject: Re: [nvda] Using Station playlist with the latest
version of NVDA
>
> Hi Joseph, it was a friend who used to use it a little while
ago, I can’t remember what exactly she said but it was something
like if it was used to produce pre-recorded shows those are then
saved as MP3 files which I can edit as if they were podcasts, like
I said though, I am quite new to the whole world of audio editing
and production etc so I can’t quite remember what she said.
>
> Warm regards, Claire Potter, Check out my brand new website:
http://www.pottersplace.me.uk/
>
> On 10/07/2018 16:12, Joseph Lee wrote:
>> Hi Claire,
>> Welcome to NVDA list.
>> Sorry to say the following as a reply to your first post,
but do you have a source who told you StationPlaylist Studio can
be used for creating podcasts? Studio is mostly meant for
producing pre-recorded or live shows on air, not necessarily used
for podcast production (for that, there are programs such as
Audacity, GoldWave, and many others).
>> I'll ask some folks I know who uses StationPlaylist
Studio regarding this possibility.
>> Cheers,
>> Joseph
>>
>> -----Original Message-----
>> From: nvda@nvda.groups.io <nvda@nvda.groups.io>
On Behalf Of Claire
>> Potter
>> Sent: Tuesday, July 10, 2018 7:31 AM
>> To: nvda@nvda.groups.io
>> Subject: [nvda] Using Station playlist with the latest
version of NVDA
>>
>> Hi, I am new to this list and I hope someone can help me.
I would like
>> to learn how to use Station playlist as I am a complete
novice and I
>> would like to use Station playlist studio to record my
own podcasts, I
>> am however unable to find a clear tutorial which explains
how to do
>> this. I am using the latest version of NVDA. Can you
help? -- Warm
>> regards, Claire Potter, Check out my brand new website:
>> http://www.pottersplace.me.uk/
>>
>>
>>
>>
>>
>>
>>
>
>
>
>
>
>
|
|
|
Hi Clair, You could do this using Audacity And its free please find download link below https://ninite.com/audacity/ also there are very good tutorials witch can be found at http://www.talking-computers.org.uk/feeds/tc.xml you can record and edit with this package Mark. Tune in to the number one station on the web TAFN radio
http://tafn.org.uk/listen
Or for our catch up service on demand http://www.tafn.org.uk/on-demand
or for our upcoming weekly schedule
http://www.tafn.org.uk/radio
part of the accessible friends network
www.tafn.org.uk
Registered UK Charity: #1108043.
Sent from Windows 10 Mail.
From: Claire PotterSent: 10 July 2018 17:03 To: nvda@nvda.groups.ioSubject: Re: [nvda] Using Station playlist with the latest version of NVDA Hi Gene, you have totally confused me now, I just want to be able to remove bits of audio which do not need to be there, and add in the jingles and music at the appropriate times. Warm regards, Claire Potter, Check out my brand new website: http://www.pottersplace.me.uk/ On 10/07/2018 16:58, Gene wrote: What is the next level? Are you editing an mp3 file and then saving it again as an MP3 file? Every time you edit a file and then reencode it while saving, you lose audio quality. Either do all your editing in a lossless format such as wave, then save the final file as MP3, or edit an existing mp3 file using a program like MP3 Direct Cut, which edits existing MP3 files and saves the edited file without reencoding it. If you edit and save an MP3 file reencoding it every time, after three or four saves, you will start to hear significant audio degredation. There may be other things you should know as the discussion continues about how to decide if you want to edit in a lossless format and save the entire file as an MP3 as the last save or use a program like MP3 Direct Cut. For now, basics such as just what you want to do would be the place to begin. If you edit an MP3 file using a program like MP3 Direct Cut, you may introduce artifacts, depending on how the recording program recorded it. You can use a recording program that eliminates this problem. I'm saying that here so you know you have that option. ----- Original Message ----- Sent: Tuesday, July 10, 2018 10:45 AM Subject: Re: [nvda] Using Station playlist with the latest version of NVDA Hi Joseph, I have used NVDA for about 6 months now, I would not by any means call myself an expert yet but I am quite confident in using it, so it is just Studio and editing programs that I am new to. My friend did say that I can’t edit in Studio itself, so that is maybe where something like Audacity or even Total recorder would come in. I do have Total recorder and I really like using that for simple editing tasks, so for example if I have a file that is 30 minutes long but I wanted to select a section to remove it is really simple to do that, that is about as far as I currently go with editing, but I would like to take it to the next level! Warm regards, Claire Potter, Check out my brand new website: http://www.pottersplace.me.uk/
On 10/07/2018 16:37, Joseph Lee wrote:
> Hi,
> Yes, you can use StationPlaylist Studio for pre-recording shows (a bit involved), but you may need a different program for editing the file afterwards.
> Just so we can help you better: are you a new NVDA user, a new Studio user, or both? If both, then I suggest learning NVDA first so you can get an idea as to how to use the screen reader before using Studio. Once you become comfortable with NVDA, then I suggest learning how to use Studio so you can use its features efficiently.
> There is as NVDA add-on (similar to scripts for other screen readers) that makes improvements to how NVDA interacts with Studio, but that's getting way ahead of the broadcast.
> Cheers,
> Joseph
>
> -----Original Message-----
> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Claire Potter
> Sent: Tuesday, July 10, 2018 8:30 AM
> To: nvda@nvda.groups.io
> Subject: Re: [nvda] Using Station playlist with the latest version of NVDA
>
> Hi Joseph, it was a friend who used to use it a little while ago, I can’t remember what exactly she said but it was something like if it was used to produce pre-recorded shows those are then saved as MP3 files which I can edit as if they were podcasts, like I said though, I am quite new to the whole world of audio editing and production etc so I can’t quite remember what she said.
>
> Warm regards, Claire Potter, Check out my brand new website: http://www.pottersplace.me.uk/
>
> On 10/07/2018 16:12, Joseph Lee wrote:
>> Hi Claire,
>> Welcome to NVDA list.
>> Sorry to say the following as a reply to your first post, but do you have a source who told you StationPlaylist Studio can be used for creating podcasts? Studio is mostly meant for producing pre-recorded or live shows on air, not necessarily used for podcast production (for that, there are programs such as Audacity, GoldWave, and many others).
>> I'll ask some folks I know who uses StationPlaylist Studio regarding this possibility.
>> Cheers,
>> Joseph
>>
>> -----Original Message-----
>> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Claire
>> Potter
>> Sent: Tuesday, July 10, 2018 7:31 AM
>> To: nvda@nvda.groups.io
>> Subject: [nvda] Using Station playlist with the latest version of NVDA
>>
>> Hi, I am new to this list and I hope someone can help me. I would like
>> to learn how to use Station playlist as I am a complete novice and I
>> would like to use Station playlist studio to record my own podcasts, I
>> am however unable to find a clear tutorial which explains how to do
>> this. I am using the latest version of NVDA. Can you help? -- Warm
>> regards, Claire Potter, Check out my brand new website:
>> http://www.pottersplace.me.uk/
>>
>>
>>
>>
>>
>>
>>
>
>
>
>
>
>
|
|
|
I don't know what the program you are asking about
does or is used for. . It sounds to me as though you are considering
using a much more complex program than is needed. You can record the
podcast and insert the gingles where needed. If you wanbt to have talking
with music under your talking, that may be more tricky, depending on if your
sound card supports the what you hear option. There is a program named
virtual recorder that may let you do this because it allows you to record from
what is known as loopback and also from a sound card simultaneously. Or
you could use a physical mixer. I'm not sure where the best place would be
for you to discuss such matters further. There may be a blind audio
list. I'm not sure if a list devoted to use of one specific product would
be a good resource or not. It might be, but maybe there is a list where
blind people who podcast help others.
If the program you want to use allows you to mix
using the program itself and removes the considerations I've spoken of, such as
whether your sound card has a Stereo Mix option or whether you have a physical
mixer, then if you have the program, that might be the thing to use. I'm
just trying to avoid making assumptions in the discussion that cause other than
the best advice. In such discussions with a new podcast producer, I don't
think anything should be assumed by anyone participating in the
discussion.
I probably can't help much more. I haven't
made podcasts, though I've done some instructional material and that used a
knowledge of recording similar to what would be needed for making at least
simple podcasts and I know about recording in general. But I haven't done
anything complex in podcasts and, while I could do so, how I would do it might
not be the easiest or most efficient ways so I'll leave future discussion to
others for the most part.
Gene
toggle quoted message
Show quoted text
----- Original Message -----
Sent: Tuesday, July 10, 2018 10:54 AM
Subject: Re: [nvda] Using Station playlist with the latest version
of NVDA
Hi, yes that's exactly what I want to do, a podcast that is mainly talking
with some jingles and some music.
Warm regards, Claire Potter, Check out my brand new website: http://www.pottersplace.me.uk/
On 10/07/2018 16:51, Gene wrote:
What do you want to do? Do you want to produce a simple podcast
with just you talking and perhaps a little music at times or something much
more complex? I haven't used the program being discussed. But
there are a lot of recording programs. Since you are new to recording,
the first thing to do is find out just what you want to do. all sorts of
recording programs can save files as MP3. It's the most widely used
digital audio format and any standard recording program has a save as MP3
option.
Gene
----- Original Message -----
Sent: Tuesday, July 10, 2018 10:30 AM
Subject: Re: [nvda] Using Station playlist with the latest version
of NVDA
Hi Joseph, it was a friend who used to use it a little while
ago, I
can’t remember what exactly she said but it was something like if
it was
used to produce pre-recorded shows those are then saved as MP3
files
which I can edit as if they were podcasts, like I said though, I am
quite new to the whole world of audio editing and production etc so I
can’t quite remember what she said.
Warm regards, Claire Potter,
Check out my brand new website: http://www.pottersplace.me.uk/
On 10/07/2018
16:12, Joseph Lee wrote:
> Hi Claire,
> Welcome to NVDA
list.
> Sorry to say the following as a reply to your first post, but do
you have a source who told you StationPlaylist Studio can be used for creating
podcasts? Studio is mostly meant for producing pre-recorded or live shows on
air, not necessarily used for podcast production (for that, there are programs
such as Audacity, GoldWave, and many others).
> I'll ask some folks I
know who uses StationPlaylist Studio regarding this possibility.
>
Cheers,
> Joseph
>
> -----Original Message-----
>
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Claire
Potter
> Sent: Tuesday, July 10, 2018 7:31 AM
> To: nvda@nvda.groups.io
> Subject: [nvda] Using
Station playlist with the latest version of NVDA
>
> Hi, I am new
to this list and I hope someone can help me. I would like to learn how to use
Station playlist as I am a complete novice and I would like to use
Station playlist studio to record my own podcasts, I am however unable to find
a clear tutorial which explains how to do this. I am using the latest version
of NVDA. Can you help? -- Warm regards, Claire Potter, Check out my
brand new website: http://www.pottersplace.me.uk/
>
>
>
>
>
>
>
|
|
|
My messages may have more information than is
helpful now. So disregard them if they are. Once the discussion
progresses further, I may have more specific information about programs and
editing as the discussion progresses.
for now, I want to find out as precisely as I can
what you want to do, so I'll ask this question.
Do you want to have music simultaneously with your
speech or just speech with jingles at times in the program?
Gene
toggle quoted message
Show quoted text
----- Original Message -----
Sent: Tuesday, July 10, 2018 11:03 AM
Subject: Re: [nvda] Using Station playlist with the latest version
of NVDA
Hi Gene, you have totally confused me now, I just want to be able to remove
bits of audio which do not need to be there, and add in the jingles and music at
the appropriate times.
Warm regards, Claire Potter, Check out my brand new website: http://www.pottersplace.me.uk/
On 10/07/2018 16:58, Gene wrote:
What is the next level? Are you editing an mp3 file and then saving
it again as an MP3 file? Every time you edit a file and then reencode it
while saving, you lose audio quality. Either do all your editing in a
lossless format such as wave, then save the final file as MP3, or edit an
existing mp3 file using a program like MP3 Direct Cut, which edits existing
MP3 files and saves the edited file without reencoding it. If you edit
and save an MP3 file reencoding it every time, after three or four saves, you
will start to hear significant audio degredation.
There may be other things you should know as the discussion continues
about how to decide if you want to edit in a lossless format and save the
entire file as an MP3 as the last save or use a program like MP3 Direct
Cut.
For now, basics such as just what you want to do would be the place to
begin.
If you edit an MP3 file using a program like MP3 Direct Cut, you may
introduce artifacts, depending on how the recording program recorded it.
You can use a recording program that eliminates this problem. I'm saying
that here so you know you have that option.
Gene
----- Original Message -----
Sent: Tuesday, July 10, 2018 10:45 AM
Subject: Re: [nvda] Using Station playlist with the latest version
of NVDA
Hi Joseph, I have used NVDA for about 6 months now, I would not
by any means call myself an expert yet but I am quite confident in using it,
so it is just Studio and editing programs that I am new to. My friend did say
that I can’t edit in Studio itself, so that is maybe where something
like Audacity or even Total recorder would come in. I do have Total recorder
and I really like using that for simple editing tasks, so for example if I
have a file that is 30 minutes long but I wanted to select a section to remove
it is really simple to do that, that is about as far as I currently go with
editing, but I would like to take it to the next level! Warm regards,
Claire Potter, Check out my brand new website: http://www.pottersplace.me.uk/
On 10/07/2018
16:37, Joseph Lee wrote:
> Hi,
> Yes, you can use StationPlaylist
Studio for pre-recording shows (a bit involved), but you may need a different
program for editing the file afterwards.
> Just so we can help you
better: are you a new NVDA user, a new Studio user, or both? If both, then I
suggest learning NVDA first so you can get an idea as to how to use the screen
reader before using Studio. Once you become comfortable with NVDA, then I
suggest learning how to use Studio so you can use its features
efficiently.
> There is as NVDA add-on (similar to scripts for other
screen readers) that makes improvements to how NVDA interacts with Studio, but
that's getting way ahead of the broadcast.
> Cheers,
>
Joseph
>
> -----Original Message-----
> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Claire
Potter
> Sent: Tuesday, July 10, 2018 8:30 AM
> To: nvda@nvda.groups.io
> Subject: Re: [nvda]
Using Station playlist with the latest version of NVDA
>
> Hi
Joseph, it was a friend who used to use it a little while ago, I can’t
remember what exactly she said but it was something like if it was used to
produce pre-recorded shows those are then saved as MP3 files which I can edit
as if they were podcasts, like I said though, I am quite new to the whole
world of audio editing and production etc so I can’t quite remember what she
said.
>
> Warm regards, Claire Potter, Check out my brand new
website: http://www.pottersplace.me.uk/
>
> On
10/07/2018 16:12, Joseph Lee wrote:
>> Hi Claire,
>> Welcome
to NVDA list.
>> Sorry to say the following as a reply to your first
post, but do you have a source who told you StationPlaylist Studio can be used
for creating podcasts? Studio is mostly meant for producing pre-recorded or
live shows on air, not necessarily used for podcast production (for that,
there are programs such as Audacity, GoldWave, and many others).
>>
I'll ask some folks I know who uses StationPlaylist Studio regarding this
possibility.
>> Cheers,
>> Joseph
>>
>>
-----Original Message-----
>> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of
Claire
>> Potter
>> Sent: Tuesday, July 10, 2018 7:31
AM
>> To: nvda@nvda.groups.io
>> Subject: [nvda]
Using Station playlist with the latest version of NVDA
>>
>>
Hi, I am new to this list and I hope someone can help me. I would
like
>> to learn how to use Station playlist as I am a complete
novice and I
>> would like to use Station playlist studio to record
my own podcasts, I
>> am however unable to find a clear tutorial
which explains how to do
>> this. I am using the latest version of
NVDA. Can you help? -- Warm
>> regards, Claire Potter, Check
out my brand new website:
>> http://www.pottersplace.me.uk/
>>
>>
>>
>>
>>
>>
>>
>
>
>
>
>
>
|
|
|
Claire Potter <claire.potter99@...>
Hi, what I want to do is have music attimes which ducks at times so I can talk over it and then the music fades out eventually, it would not get any more complex than that. Warm regards, Claire Potter, Check out my brand new website: http://www.pottersplace.me.uk/
On 10/07/2018 17:22, Gene wrote:
toggle quoted message
Show quoted text
My messages may have more information than is helpful now.
So disregard them if they are. Once the discussion progresses
further, I may have more specific information about programs and
editing as the discussion progresses.
for now, I want to find out as precisely as I can what you
want to do, so I'll ask this question.
Do you want to have music simultaneously with your speech or
just speech with jingles at times in the program?
Gene
----- Original Message -----
Sent: Tuesday, July 10, 2018 11:03 AM
Subject: Re: [nvda] Using Station playlist with
the latest version of NVDA
Hi Gene, you have totally confused me now, I just want to be
able to remove bits of audio which do not need to be there, and
add in the jingles and music at the appropriate times.
Warm regards, Claire Potter, Check out my brand new website: http://www.pottersplace.me.uk/
On 10/07/2018 16:58, Gene wrote:
What is the next level? Are you editing an mp3 file and
then saving it again as an MP3 file? Every time you edit a
file and then reencode it while saving, you lose audio
quality. Either do all your editing in a lossless format such
as wave, then save the final file as MP3, or edit an existing
mp3 file using a program like MP3 Direct Cut, which edits
existing MP3 files and saves the edited file without
reencoding it. If you edit and save an MP3 file reencoding it
every time, after three or four saves, you will start to hear
significant audio degredation.
There may be other things you should know as the discussion
continues about how to decide if you want to edit in a
lossless format and save the entire file as an MP3 as the last
save or use a program like MP3 Direct Cut.
For now, basics such as just what you want to do would be
the place to begin.
If you edit an MP3 file using a program like MP3 Direct
Cut, you may introduce artifacts, depending on how the
recording program recorded it. You can use a recording
program that eliminates this problem. I'm saying that here so
you know you have that option.
Gene
----- Original Message -----
Sent: Tuesday, July 10, 2018 10:45 AM
Subject: Re: [nvda] Using Station playlist with
the latest version of NVDA
Hi Joseph, I have used NVDA for about 6 months now, I would not
by any means call myself an expert yet but I am quite confident
in using it, so it is just Studio and editing programs that I am
new to. My friend did say that I can’t edit in Studio itself,
so that is maybe where something like Audacity or even Total
recorder would come in. I do have Total recorder and I really
like using that for simple editing tasks, so for example if I
have a file that is 30 minutes long but I wanted to select a
section to remove it is really simple to do that, that is about
as far as I currently go with editing, but I would like to take
it to the next level! Warm regards, Claire Potter, Check out my
brand new website: http://www.pottersplace.me.uk/
On 10/07/2018 16:37, Joseph Lee wrote:
> Hi,
> Yes, you can use StationPlaylist Studio for pre-recording
shows (a bit involved), but you may need a different program for
editing the file afterwards.
> Just so we can help you better: are you a new NVDA user, a
new Studio user, or both? If both, then I suggest learning NVDA
first so you can get an idea as to how to use the screen reader
before using Studio. Once you become comfortable with NVDA, then
I suggest learning how to use Studio so you can use its features
efficiently.
> There is as NVDA add-on (similar to scripts for other
screen readers) that makes improvements to how NVDA interacts
with Studio, but that's getting way ahead of the broadcast.
> Cheers,
> Joseph
>
> -----Original Message-----
> From: nvda@nvda.groups.io <nvda@nvda.groups.io>
On Behalf Of Claire Potter
> Sent: Tuesday, July 10, 2018 8:30 AM
> To: nvda@nvda.groups.io
> Subject: Re: [nvda] Using Station playlist with the latest
version of NVDA
>
> Hi Joseph, it was a friend who used to use it a little
while ago, I can’t remember what exactly she said but it was
something like if it was used to produce pre-recorded shows
those are then saved as MP3 files which I can edit as if they
were podcasts, like I said though, I am quite new to the whole
world of audio editing and production etc so I can’t quite
remember what she said.
>
> Warm regards, Claire Potter, Check out my brand new
website: http://www.pottersplace.me.uk/
>
> On 10/07/2018 16:12, Joseph Lee wrote:
>> Hi Claire,
>> Welcome to NVDA list.
>> Sorry to say the following as a reply to your first
post, but do you have a source who told you StationPlaylist
Studio can be used for creating podcasts? Studio is mostly meant
for producing pre-recorded or live shows on air, not necessarily
used for podcast production (for that, there are programs such
as Audacity, GoldWave, and many others).
>> I'll ask some folks I know who uses StationPlaylist
Studio regarding this possibility.
>> Cheers,
>> Joseph
>>
>> -----Original Message-----
>> From: nvda@nvda.groups.io <nvda@nvda.groups.io>
On Behalf Of Claire
>> Potter
>> Sent: Tuesday, July 10, 2018 7:31 AM
>> To: nvda@nvda.groups.io
>> Subject: [nvda] Using Station playlist with the latest
version of NVDA
>>
>> Hi, I am new to this list and I hope someone can help
me. I would like
>> to learn how to use Station playlist as I am a complete
novice and I
>> would like to use Station playlist studio to record my
own podcasts, I
>> am however unable to find a clear tutorial which
explains how to do
>> this. I am using the latest version of NVDA. Can you
help? -- Warm
>> regards, Claire Potter, Check out my brand new website:
>> http://www.pottersplace.me.uk/
>>
>>
>>
>>
>>
>>
>>
>
>
>
>
>
>
|
|
|
Sarah k Alawami
Why not just record yoru stuff, edit it then add the music later. I add about maybe 5 seconds of silence, paste in about 7 seconds of music that will then faid out at the right time. Youcan do all of this in audacity by the way Or even goldwave.
Hi, what I want to do is have music attimes which ducks at times so I can talk over it and then the music fades out eventually, it would not get any more complex than that. Warm regards, Claire Potter, Check out my brand new website: http://www.pottersplace.me.uk/
On 10/07/2018 17:22, Gene wrote:
My messages may have more information than is helpful now.
So disregard them if they are. Once the discussion progresses
further, I may have more specific information about programs and
editing as the discussion progresses.
for now, I want to find out as precisely as I can what you
want to do, so I'll ask this question.
Do you want to have music simultaneously with your speech or
just speech with jingles at times in the program?
Gene
----- Original Message -----
Sent: Tuesday, July 10, 2018 11:03 AM
Subject: Re: [nvda] Using Station playlist with
the latest version of NVDA
Hi Gene, you have totally confused me now, I just want to be
able to remove bits of audio which do not need to be there, and
add in the jingles and music at the appropriate times.
Warm regards, Claire Potter, Check out my brand new website: http://www.pottersplace.me.uk/
On 10/07/2018 16:58, Gene wrote:
What is the next level? Are you editing an mp3 file and
then saving it again as an MP3 file? Every time you edit a
file and then reencode it while saving, you lose audio
quality. Either do all your editing in a lossless format such
as wave, then save the final file as MP3, or edit an existing
mp3 file using a program like MP3 Direct Cut, which edits
existing MP3 files and saves the edited file without
reencoding it. If you edit and save an MP3 file reencoding it
every time, after three or four saves, you will start to hear
significant audio degredation.
There may be other things you should know as the discussion
continues about how to decide if you want to edit in a
lossless format and save the entire file as an MP3 as the last
save or use a program like MP3 Direct Cut.
For now, basics such as just what you want to do would be
the place to begin.
If you edit an MP3 file using a program like MP3 Direct
Cut, you may introduce artifacts, depending on how the
recording program recorded it. You can use a recording
program that eliminates this problem. I'm saying that here so
you know you have that option.
Gene
----- Original Message -----
Sent: Tuesday, July 10, 2018 10:45 AM
Subject: Re: [nvda] Using Station playlist with
the latest version of NVDA
Hi Joseph, I have used NVDA for about 6 months now, I would not
by any means call myself an expert yet but I am quite confident
in using it, so it is just Studio and editing programs that I am
new to. My friend did say that I can’t edit in Studio itself,
so that is maybe where something like Audacity or even Total
recorder would come in. I do have Total recorder and I really
like using that for simple editing tasks, so for example if I
have a file that is 30 minutes long but I wanted to select a
section to remove it is really simple to do that, that is about
as far as I currently go with editing, but I would like to take
it to the next level! Warm regards, Claire Potter, Check out my
brand new website: http://www.pottersplace.me.uk/
On 10/07/2018 16:37, Joseph Lee wrote:
> Hi,
> Yes, you can use StationPlaylist Studio for pre-recording
shows (a bit involved), but you may need a different program for
editing the file afterwards.
> Just so we can help you better: are you a new NVDA user, a
new Studio user, or both? If both, then I suggest learning NVDA
first so you can get an idea as to how to use the screen reader
before using Studio. Once you become comfortable with NVDA, then
I suggest learning how to use Studio so you can use its features
efficiently.
> There is as NVDA add-on (similar to scripts for other
screen readers) that makes improvements to how NVDA interacts
with Studio, but that's getting way ahead of the broadcast.
> Cheers,
> Joseph
>
> -----Original Message-----
> From: nvda@nvda.groups.io <nvda@nvda.groups.io>
On Behalf Of Claire Potter
> Sent: Tuesday, July 10, 2018 8:30 AM
> To: nvda@nvda.groups.io
> Subject: Re: [nvda] Using Station playlist with the latest
version of NVDA
>
> Hi Joseph, it was a friend who used to use it a little
while ago, I can’t remember what exactly she said but it was
something like if it was used to produce pre-recorded shows
those are then saved as MP3 files which I can edit as if they
were podcasts, like I said though, I am quite new to the whole
world of audio editing and production etc so I can’t quite
remember what she said.
>
> Warm regards, Claire Potter, Check out my brand new
website: http://www.pottersplace.me.uk/
>
> On 10/07/2018 16:12, Joseph Lee wrote:
>> Hi Claire,
>> Welcome to NVDA list.
>> Sorry to say the following as a reply to your first
post, but do you have a source who told you StationPlaylist
Studio can be used for creating podcasts? Studio is mostly meant
for producing pre-recorded or live shows on air, not necessarily
used for podcast production (for that, there are programs such
as Audacity, GoldWave, and many others).
>> I'll ask some folks I know who uses StationPlaylist
Studio regarding this possibility.
>> Cheers,
>> Joseph
>>
>> -----Original Message-----
>> From: nvda@nvda.groups.io <nvda@nvda.groups.io>
On Behalf Of Claire
>> Potter
>> Sent: Tuesday, July 10, 2018 7:31 AM
>> To: nvda@nvda.groups.io
>> Subject: [nvda] Using Station playlist with the latest
version of NVDA
>>
>> Hi, I am new to this list and I hope someone can help
me. I would like
>> to learn how to use Station playlist as I am a complete
novice and I
>> would like to use Station playlist studio to record my
own podcasts, I
>> am however unable to find a clear tutorial which
explains how to do
>> this. I am using the latest version of NVDA. Can you
help? -- Warm
>> regards, Claire Potter, Check out my brand new website:
>> http://www.pottersplace.me.uk/
>>
>>
>>
>>
>>
>>
>>
>
>
>
>
>
>
|
|
|
I'll mostly let others discuss the best way to
achieve that. Since I haven't done that sort of thing, my instructional
material has just been me talking and the screen-reader speaking, what I might
suggest might not be the easiest or most efficient way to do what you
want.
Gene
toggle quoted message
Show quoted text
----- Original Message -----
Sent: Tuesday, July 10, 2018 11:38 AM
Subject: Re: [nvda] Using Station playlist with the latest version
of NVDA
Hi, what I want to do is have music attimes which ducks at times so I can talk over it and then the music fades out eventually, it would not get any more complex than that. Warm regards, Claire Potter, Check out my brand new website: http://www.pottersplace.me.uk/
On 10/07/2018 17:22, Gene wrote:
My messages may have more information than is helpful now. So
disregard them if they are. Once the discussion progresses further, I
may have more specific information about programs and editing as the
discussion progresses.
for now, I want to find out as precisely as I can what you want to do, so
I'll ask this question.
Do you want to have music simultaneously with your speech or just speech
with jingles at times in the program?
Gene
----- Original Message -----
Sent: Tuesday, July 10, 2018 11:03 AM
Subject: Re: [nvda] Using Station playlist with the latest version
of NVDA
Hi Gene, you have totally confused me now, I just want to be able to remove
bits of audio which do not need to be there, and add in the jingles and music
at the appropriate times.
Warm regards, Claire Potter, Check out my brand new website: http://www.pottersplace.me.uk/
On 10/07/2018 16:58, Gene wrote:
What is the next level? Are you editing an mp3 file and then
saving it again as an MP3 file? Every time you edit a file and then
reencode it while saving, you lose audio quality. Either do all your
editing in a lossless format such as wave, then save the final file as MP3,
or edit an existing mp3 file using a program like MP3 Direct Cut, which
edits existing MP3 files and saves the edited file without reencoding
it. If you edit and save an MP3 file reencoding it every time, after
three or four saves, you will start to hear significant audio
degredation.
There may be other things you should know as the discussion continues
about how to decide if you want to edit in a lossless format and save the
entire file as an MP3 as the last save or use a program like MP3 Direct
Cut.
For now, basics such as just what you want to do would be the place to
begin.
If you edit an MP3 file using a program like MP3 Direct Cut, you may
introduce artifacts, depending on how the recording program recorded
it. You can use a recording program that eliminates this
problem. I'm saying that here so you know you have that option.
Gene
----- Original Message -----
Sent: Tuesday, July 10, 2018 10:45 AM
Subject: Re: [nvda] Using Station playlist with the latest
version of NVDA
Hi Joseph, I have used NVDA for about 6 months now, I would
not by any means call myself an expert yet but I am quite confident in using
it, so it is just Studio and editing programs that I am new to. My friend
did say that I can’t edit in Studio itself, so that is maybe where
something like Audacity or even Total recorder would come in. I do have
Total recorder and I really like using that for simple editing tasks, so for
example if I have a file that is 30 minutes long but I wanted to select a
section to remove it is really simple to do that, that is about as far as I
currently go with editing, but I would like to take it to the next
level! Warm regards, Claire Potter, Check out my brand new website: http://www.pottersplace.me.uk/
On
10/07/2018 16:37, Joseph Lee wrote:
> Hi,
> Yes, you can use
StationPlaylist Studio for pre-recording shows (a bit involved), but you may
need a different program for editing the file afterwards.
> Just so we
can help you better: are you a new NVDA user, a new Studio user, or both? If
both, then I suggest learning NVDA first so you can get an idea as to how to
use the screen reader before using Studio. Once you become comfortable with
NVDA, then I suggest learning how to use Studio so you can use its features
efficiently.
> There is as NVDA add-on (similar to scripts for other
screen readers) that makes improvements to how NVDA interacts with Studio,
but that's getting way ahead of the broadcast.
> Cheers,
>
Joseph
>
> -----Original Message-----
> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Claire
Potter
> Sent: Tuesday, July 10, 2018 8:30 AM
> To: nvda@nvda.groups.io
> Subject: Re: [nvda]
Using Station playlist with the latest version of NVDA
>
> Hi
Joseph, it was a friend who used to use it a little while ago, I can’t
remember what exactly she said but it was something like if it was used to
produce pre-recorded shows those are then saved as MP3 files which I can
edit as if they were podcasts, like I said though, I am quite new to the
whole world of audio editing and production etc so I can’t quite remember
what she said.
>
> Warm regards, Claire Potter, Check out my
brand new website: http://www.pottersplace.me.uk/
>
> On
10/07/2018 16:12, Joseph Lee wrote:
>> Hi Claire,
>>
Welcome to NVDA list.
>> Sorry to say the following as a reply to
your first post, but do you have a source who told you StationPlaylist
Studio can be used for creating podcasts? Studio is mostly meant for
producing pre-recorded or live shows on air, not necessarily used for
podcast production (for that, there are programs such as Audacity, GoldWave,
and many others).
>> I'll ask some folks I know who uses
StationPlaylist Studio regarding this possibility.
>>
Cheers,
>> Joseph
>>
>> -----Original
Message-----
>> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of
Claire
>> Potter
>> Sent: Tuesday, July 10, 2018 7:31
AM
>> To: nvda@nvda.groups.io
>> Subject: [nvda]
Using Station playlist with the latest version of
NVDA
>>
>> Hi, I am new to this list and I hope someone
can help me. I would like
>> to learn how to use Station playlist
as I am a complete novice and I
>> would like to use Station
playlist studio to record my own podcasts, I
>> am however unable
to find a clear tutorial which explains how to do
>> this. I am
using the latest version of NVDA. Can you help? -- Warm
>>
regards, Claire Potter, Check out my brand new website:
>> http://www.pottersplace.me.uk/
>>
>>
>>
>>
>>
>>
>>
>
>
>
>
>
>
|
|
|
Hi, This can be done in Audacity, GoldWave and other audio editors via “voiceover” and similar effects. You would first record your voice, find out how long your voice track is, load appropriate music, then mix them via this effect (in GoldWave, voiceover effect will mix in your voice track copied to the clipboard into your music). Similarly, for fade out, you can specify when the music should end and do either a crossfade, or let the music fade out and mix in your voice track (I can tell you, having done this work for ten years, it requires precise control in timing, dynamics (volume changes) and what not in order to achieve professional quality; my tutorial set (particularly Windows 10 audio guides) are good examples of this). The biggest advantage of this method is that you can stay in just one program. The issue though is having precise control over the final audio cut. On the other hand, you can do the same thing with StationPlaylist Studio with editing done via another program. For benefit of those who may not know how it can be done, here’s how: - Load a bunch of tracks into Studio’s playlist viewer (the main window), including the background music.
- Set up a dummy encoder that’ll record things to mp3 files.
- Configure the microphone in Studio so music will fade (Studio Options page).
- Start the encoder.
- Switch to Studio’s playlist viewer, move down through the music beds, then press Enter to play each one.
- Speak to your microphone. Be sure to do it whenever you need to speak – doing this with mic on at all times may result in lower volume for the music bed.
- When you’re done, press S from Studio to stop with fade.
- With the recording done, turn off the dummy encoder.
The advantage of this approach is that it’ll feel like you’re doing a live broadcast. The problems with this approach are: - You need to have an idea as to which music beds to play (in other words, choose the playlist items carefully).
- You need to have precise control over when to turn on or off the microphone, as well as when to fade the music bed.
- You need to set up a dummy encoder for this purpose.
- The mp3 you’ll get is a rough cut, so you need to edit it with another program.
As for file formats to use when editing audio: as Sarah and others pointed out, it is best to use an uncompressed (pure) audio format such as wave (.wav) or FLAC (free lossless audio codec). I personally edit my files in .wav format, and once everything is in place, then I convert it into mp3 (lossy format) with reasonable quality. In case you haven’t, I highly recommend talking to people such as Jonathan Mosen, Brian Hartgen, David Woodbridge and many others who are professors of audio editing from blindness perspective. Cheers, Joseph
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Claire Potter
Sent: Tuesday, July 10, 2018 9:39 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Using Station playlist with the latest version of NVDA Hi, what I want to do is have music attimes which ducks at times so I can talk over it and then the music fades out eventually, it would not get any more complex than that. Warm regards, Claire Potter, Check out my brand new website: http://www.pottersplace.me.uk/ On 10/07/2018 17:22, Gene wrote: My messages may have more information than is helpful now. So disregard them if they are. Once the discussion progresses further, I may have more specific information about programs and editing as the discussion progresses. for now, I want to find out as precisely as I can what you want to do, so I'll ask this question. Do you want to have music simultaneously with your speech or just speech with jingles at times in the program? ----- Original Message ----- Sent: Tuesday, July 10, 2018 11:03 AM Subject: Re: [nvda] Using Station playlist with the latest version of NVDA Hi Gene, you have totally confused me now, I just want to be able to remove bits of audio which do not need to be there, and add in the jingles and music at the appropriate times. Warm regards, Claire Potter, Check out my brand new website: http://www.pottersplace.me.uk/ On 10/07/2018 16:58, Gene wrote: What is the next level? Are you editing an mp3 file and then saving it again as an MP3 file? Every time you edit a file and then reencode it while saving, you lose audio quality. Either do all your editing in a lossless format such as wave, then save the final file as MP3, or edit an existing mp3 file using a program like MP3 Direct Cut, which edits existing MP3 files and saves the edited file without reencoding it. If you edit and save an MP3 file reencoding it every time, after three or four saves, you will start to hear significant audio degredation. There may be other things you should know as the discussion continues about how to decide if you want to edit in a lossless format and save the entire file as an MP3 as the last save or use a program like MP3 Direct Cut. For now, basics such as just what you want to do would be the place to begin. If you edit an MP3 file using a program like MP3 Direct Cut, you may introduce artifacts, depending on how the recording program recorded it. You can use a recording program that eliminates this problem. I'm saying that here so you know you have that option. ----- Original Message ----- Sent: Tuesday, July 10, 2018 10:45 AM Subject: Re: [nvda] Using Station playlist with the latest version of NVDA Hi Joseph, I have used NVDA for about 6 months now, I would not by any means call myself an expert yet but I am quite confident in using it, so it is just Studio and editing programs that I am new to. My friend did say that I can’t edit in Studio itself, so that is maybe where something like Audacity or even Total recorder would come in. I do have Total recorder and I really like using that for simple editing tasks, so for example if I have a file that is 30 minutes long but I wanted to select a section to remove it is really simple to do that, that is about as far as I currently go with editing, but I would like to take it to the next level! Warm regards, Claire Potter, Check out my brand new website: http://www.pottersplace.me.uk/
On 10/07/2018 16:37, Joseph Lee wrote:
> Hi,
> Yes, you can use StationPlaylist Studio for pre-recording shows (a bit involved), but you may need a different program for editing the file afterwards.
> Just so we can help you better: are you a new NVDA user, a new Studio user, or both? If both, then I suggest learning NVDA first so you can get an idea as to how to use the screen reader before using Studio. Once you become comfortable with NVDA, then I suggest learning how to use Studio so you can use its features efficiently.
> There is as NVDA add-on (similar to scripts for other screen readers) that makes improvements to how NVDA interacts with Studio, but that's getting way ahead of the broadcast.
> Cheers,
> Joseph
>
> -----Original Message-----
> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Claire Potter
> Sent: Tuesday, July 10, 2018 8:30 AM
> To: nvda@nvda.groups.io
> Subject: Re: [nvda] Using Station playlist with the latest version of NVDA
>
> Hi Joseph, it was a friend who used to use it a little while ago, I can’t remember what exactly she said but it was something like if it was used to produce pre-recorded shows those are then saved as MP3 files which I can edit as if they were podcasts, like I said though, I am quite new to the whole world of audio editing and production etc so I can’t quite remember what she said.
>
> Warm regards, Claire Potter, Check out my brand new website: http://www.pottersplace.me.uk/
>
> On 10/07/2018 16:12, Joseph Lee wrote:
>> Hi Claire,
>> Welcome to NVDA list.
>> Sorry to say the following as a reply to your first post, but do you have a source who told you StationPlaylist Studio can be used for creating podcasts? Studio is mostly meant for producing pre-recorded or live shows on air, not necessarily used for podcast production (for that, there are programs such as Audacity, GoldWave, and many others).
>> I'll ask some folks I know who uses StationPlaylist Studio regarding this possibility.
>> Cheers,
>> Joseph
>>
>> -----Original Message-----
>> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Claire
>> Potter
>> Sent: Tuesday, July 10, 2018 7:31 AM
>> To: nvda@nvda.groups.io
>> Subject: [nvda] Using Station playlist with the latest version of NVDA
>>
>> Hi, I am new to this list and I hope someone can help me. I would like
>> to learn how to use Station playlist as I am a complete novice and I
>> would like to use Station playlist studio to record my own podcasts, I
>> am however unable to find a clear tutorial which explains how to do
>> this. I am using the latest version of NVDA. Can you help? -- Warm
>> regards, Claire Potter, Check out my brand new website:
>> http://www.pottersplace.me.uk/
>>
>>
>>
>>
>>
>>
>>
>
>
>
>
>
>
|
|
|
Hi, Claire
As you intend to be editing the recording anyway, I would suggest just using the editing program to do all your recording in the first place as, in my view, using Station Playlist for part of it is introducing unnecessary complications, not to mention expense! Something like Goldwave or Audacity should meet your needs perfectly well.
Regards
Richard Bartholomew
toggle quoted message
Show quoted text
-----Original Message----- From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Claire Potter Sent: 10 July 2018 16:46 To: nvda@nvda.groups.io Subject: Re: [nvda] Using Station playlist with the latest version of NVDA Hi Joseph, I have used NVDA for about 6 months now, I would not by any means call myself an expert yet but I am quite confident in using it, so it is just Studio and editing programs that I am new to. My friend did say that I can’t edit in Studio itself, so that is maybe where something like Audacity or even Total recorder would come in. I do have Total recorder and I really like using that for simple editing tasks, so for example if I have a file that is 30 minutes long but I wanted to select a section to remove it is really simple to do that, that is about as far as I currently go with editing, but I would like to take it to the next level! Warm regards, Claire Potter, Check out my brand new website: http://www.pottersplace.me.uk/On 10/07/2018 16:37, Joseph Lee wrote: Hi,
Yes, you can use StationPlaylist Studio for pre-recording shows (a bit involved), but you may need a different program for editing the file afterwards.
Just so we can help you better: are you a new NVDA user, a new Studio user, or both? If both, then I suggest learning NVDA first so you can get an idea as to how to use the screen reader before using Studio. Once you become comfortable with NVDA, then I suggest learning how to use Studio so you can use its features efficiently.
There is as NVDA add-on (similar to scripts for other screen readers) that makes improvements to how NVDA interacts with Studio, but that's getting way ahead of the broadcast.
Cheers,
Joseph
-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Claire
Potter
Sent: Tuesday, July 10, 2018 8:30 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Using Station playlist with the latest version of
NVDA
Hi Joseph, it was a friend who used to use it a little while ago, I can’t remember what exactly she said but it was something like if it was used to produce pre-recorded shows those are then saved as MP3 files which I can edit as if they were podcasts, like I said though, I am quite new to the whole world of audio editing and production etc so I can’t quite remember what she said.
Warm regards, Claire Potter, Check out my brand new website:
http://www.pottersplace.me.uk/
On 10/07/2018 16:12, Joseph Lee wrote:
Hi Claire,
Welcome to NVDA list.
Sorry to say the following as a reply to your first post, but do you have a source who told you StationPlaylist Studio can be used for creating podcasts? Studio is mostly meant for producing pre-recorded or live shows on air, not necessarily used for podcast production (for that, there are programs such as Audacity, GoldWave, and many others).
I'll ask some folks I know who uses StationPlaylist Studio regarding this possibility.
Cheers,
Joseph
-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Claire
Potter
Sent: Tuesday, July 10, 2018 7:31 AM
To: nvda@nvda.groups.io
Subject: [nvda] Using Station playlist with the latest version of
NVDA
Hi, I am new to this list and I hope someone can help me. I would
like to learn how to use Station playlist as I am a complete novice
and I would like to use Station playlist studio to record my own
podcasts, I am however unable to find a clear tutorial which explains
how to do this. I am using the latest version of NVDA. Can you help?
-- Warm regards, Claire Potter, Check out my brand new website:
http://www.pottersplace.me.uk/
|
|
|
