Topics

Weather_Plus7.1 update available


Betsy Grenevitch
 

I did all of that. There were no other files under temp.


Betsy from Georgia


On 9/23/2019 6:06 AM, Adriano Barbieri via Groups.Io wrote:

Hi Chris,


No, it overwrites it.
The error in Betsy's log indicated lines not consistent with the reported error, which I remember already having solved some time ago in some previous version.
I don't know how it is possible, but surely, without knowing it, it is using an old version even if it says to read that it is 7.1.
This is why I advised you to uninstall it and clean% temp from every old add-on file.

Regards
Adriano


Il 23/09/2019 10:47, Chris Mullins ha scritto:

Hi Adriano

Could the problem be anything to do with the weather.ini or weather.zipcodes because I note these files are in the Appdata\Roaming\NVDA folder, so are used by all versions?  If weather.ini from an old version did not get removed, would the creation of weather.ini from a new install create weather(1).ini?        

 

Cheers

Chris

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Adriano Barbieri via Groups.Io
Sent: 23 September 2019 01:59
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather_Plus7.1 update available

 

Hi Betsy, I'm sorry, the link was distorted by the next text, here's the correct one:

http://www.nvda.it/files/plugin/weather_plus7.1.nvda-addon

 

Regards

Adriano

 

 

Il 23/09/2019 00:10, Betsy Grenevitch ha scritto:

The link you took me too is not fully in English so I have no idea where the download link is located. There were no other instances of Weather Plus, however.

I deleted the add-on, though.

 

Betsy from Georgia

 

-- 
Betsy Grenevitch
678=862-3876


Adriano Barbieri
 

Hi Chris,


No, it overwrites it.
The error in Betsy's log indicated lines not consistent with the reported error, which I remember already having solved some time ago in some previous version.
I don't know how it is possible, but surely, without knowing it, it is using an old version even if it says to read that it is 7.1.
This is why I advised you to uninstall it and clean% temp from every old add-on file.

Regards
Adriano


Il 23/09/2019 10:47, Chris Mullins ha scritto:

Hi Adriano

Could the problem be anything to do with the weather.ini or weather.zipcodes because I note these files are in the Appdata\Roaming\NVDA folder, so are used by all versions?  If weather.ini from an old version did not get removed, would the creation of weather.ini from a new install create weather(1).ini?        

 

Cheers

Chris

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Adriano Barbieri via Groups.Io
Sent: 23 September 2019 01:59
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather_Plus7.1 update available

 

Hi Betsy, I'm sorry, the link was distorted by the next text, here's the correct one:

http://www.nvda.it/files/plugin/weather_plus7.1.nvda-addon

 

Regards

Adriano

 

 

Il 23/09/2019 00:10, Betsy Grenevitch ha scritto:

The link you took me too is not fully in English so I have no idea where the download link is located. There were no other instances of Weather Plus, however.

I deleted the add-on, though.

 

Betsy from Georgia

 


Adriano Barbieri
 

Hi Chris,


No, it overwrites it.
The error in Betsy's log indicated lines not consistent with the reported error, which I remember already having solved some time ago in some previous version.
I don't know how it is possible, but surely, without knowing it, it is using an old version even if it says to read that it is 7.1.
This is why I advised you to uninstall it and clean% temp from every old add-on file.

Regards
Adriano


Il 23/09/2019 10:47, Chris Mullins ha scritto:

Hi Adriano

Could the problem be anything to do with the weather.ini or weather.zipcodes because I note these files are in the Appdata\Roaming\NVDA folder, so are used by all versions?  If weather.ini from an old version did not get removed, would the creation of weather.ini from a new install create weather(1).ini?        

 

Cheers

Chris

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Adriano Barbieri via Groups.Io
Sent: 23 September 2019 01:59
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather_Plus7.1 update available

 

Hi Betsy, I'm sorry, the link was distorted by the next text, here's the correct one:

http://www.nvda.it/files/plugin/weather_plus7.1.nvda-addon

 

Regards

Adriano

 

 

Il 23/09/2019 00:10, Betsy Grenevitch ha scritto:

The link you took me too is not fully in English so I have no idea where the download link is located. There were no other instances of Weather Plus, however.

I deleted the add-on, though.

 

Betsy from Georgia

 


Chris Mullins
 

Hi Adriano

Could the problem be anything to do with the weather.ini or weather.zipcodes because I note these files are in the Appdata\Roaming\NVDA folder, so are used by all versions?  If weather.ini from an old version did not get removed, would the creation of weather.ini from a new install create weather(1).ini?        

 

Cheers

Chris

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Adriano Barbieri via Groups.Io
Sent: 23 September 2019 01:59
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather_Plus7.1 update available

 

Hi Betsy, I'm sorry, the link was distorted by the next text, here's the correct one:

http://www.nvda.it/files/plugin/weather_plus7.1.nvda-addon

 

Regards

Adriano

 

 

Il 23/09/2019 00:10, Betsy Grenevitch ha scritto:

The link you took me too is not fully in English so I have no idea where the download link is located. There were no other instances of Weather Plus, however.

I deleted the add-on, though.

 

Betsy from Georgia

 


Betsy Grenevitch
 

This is the link I tried from the email you sent out on Saturday. It still is not working. My daughter thinks the add-on is broken or something. She even looked to see if there were any messages coming up on the screen when it will not allow me to do anything with the cities or settings and nothing is coming up. Did the log I send not show what is going on?


Thanks for all of your help.


If we remoted sometime would that help you see what is going on?



On 9/22/2019 8:59 PM, Adriano Barbieri via Groups.Io wrote:

Hi Betsy, I'm sorry, the link was distorted by the next text, here's the correct one:

http://www.nvda.it/files/plugin/weather_plus7.1.nvda-addon


Regards

Adriano



Il 23/09/2019 00:10, Betsy Grenevitch ha scritto:

The link you took me too is not fully in English so I have no idea where the download link is located. There were no other instances of Weather Plus, however.

I deleted the add-on, though.


Betsy from Georgia


-- 
Betsy Grenevitch
678=862-3876


Adriano Barbieri
 

Hi Betsy, I'm sorry, the link was distorted by the next text, here's the correct one:

http://www.nvda.it/files/plugin/weather_plus7.1.nvda-addon


Regards

Adriano



Il 23/09/2019 00:10, Betsy Grenevitch ha scritto:

The link you took me too is not fully in English so I have no idea where the download link is located. There were no other instances of Weather Plus, however.

I deleted the add-on, though.


Betsy from Georgia



Betsy Grenevitch
 

The link you took me too is not fully in English so I have no idea where the download link is located. There were no other instances of Weather Plus, however.

I deleted the add-on, though.


Betsy from Georgia

On 9/22/2019 5:56 PM, Adriano Barbieri via Groups.Io wrote:

Betsy,

Ok, please followed these instructions:

yetfrom that window:nvda submenu, tools, manage addons, sselect again Weather_Plus, press tab until find the button "remove addon". and press enter.

Confirm and then tpress "close" button.

Nvda must restart.

Now press windows +r and enter:
"%temp%" without quotation marks.
press w several times until you find any file named Weather_plus, delete all those you find with this name, if you can't find is better.
Now download and install again Weather_Plus7.1 from:
http://www.nvda.it/files/plugin/weather_plus7.1.nvda-addonIl 22/09/2019 23:29, Betsy Grenevitch ha scritto:


Let them know if it works well now.
Adriano


I cannot figure out how to copy what it says but it says it is 7.1.


Betsy from Georgia


On 9/22/2019 5:25 PM, Adriano Barbieri via Groups.Io wrote:

Betsy,

Ok, I've seen.
I know this error was present in previous versions and was fixed.Let's see what Weather_Plus version you are exactly using: nvda menu, tools submenu, manage addons.
Press w until find Weather_Plus and read de version.


Adriano

Or press tab and press the button about add-on and confirm if it is 7.1 version.Il 22/09/2019 23:09, Betsy Grenevitch ha scritto:

INFO - __main__ (17:04:02.259):
Starting NVDA
INFO - core.main (17:04:03.118):
Config dir: C:\Users\baseb\AppData\Roaming\nvda
INFO - config.ConfigManager._loadConfig (17:04:03.118):
Loading config: C:\Users\baseb\AppData\Roaming\nvda\nvda.ini
INFO - core.main (17:04:03.486):
NVDA version 2019.2
INFO - core.main (17:04:03.486):
Using Windows version 10.0.18362 workstation
INFO - core.main (17:04:03.486):
Using Python version 2.7.16 (v2.7.16:413a49145e, Mar  4 2019, 01:30:55) [MSC v.1500 32 bit (Intel)]
INFO - core.main (17:04:03.486):
Using comtypes version 1.1.7
INFO - core.main (17:04:03.486):
Using configobj version 5.1.0 with validate version 1.0.1
INFO - synthDriverHandler.setSynth (17:04:05.686):
Loaded synthDriver eloquence
INFO - core.main (17:04:06.338):
Using wx version 4.0.3 msw (phoenix) wxWidgets 3.0.5
INFO - brailleInput.initialize (17:04:06.339):
Braille input initialized
INFO - braille.initialize (17:04:06.348):
Using liblouis version 3.10.0
INFO - braille.BrailleHandler.setDisplayByName (17:04:06.359):
Loaded braille display driver noBraille, current display has 0 cells.
WARNING - core.main (17:04:06.467):
Java Access Bridge not available
INFO - _UIAHandler.UIAHandler.MTAThreadFunc (17:04:06.517):
UIAutomation: IUIAutomation6
INFO - core.main (17:04:12.048):
NVDA initialized
ERROR - unhandled exception (17:08:15.556):
Traceback (most recent call last):
  File "C:\Users\baseb\AppData\Roaming\nvda\addons\Weather_Plus\globalPlugins\Weather_Plus\__init__.py", line 212, in onSetZipCodeDialog
  File "C:\Users\baseb\AppData\Roaming\nvda\addons\Weather_Plus\globalPlugins\Weather_Plus\__init__.py", line 2242, in __init__
  File "C:\Users\baseb\AppData\Roaming\nvda\addons\Weather_Plus\globalPlugins\Weather_Plus\__init__.py", line 2561, in OnChoice
NameError: global name '_volume' is not defined

-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876


Adriano Barbieri
 

Betsy,

Ok, please followed these instructions:

yetfrom that window:nvda submenu, tools, manage addons, sselect again Weather_Plus, press tab until find the button "remove addon". and press enter.

Confirm and then tpress "close" button.

Nvda must restart.

Now press windows +r and enter:
"%temp%" without quotation marks.
press w several times until you find any file named Weather_plus, delete all those you find with this name, if you can't find is better.
Now download and install again Weather_Plus7.1 from:
http://www.nvda.it/files/plugin/weather_plus7.1.nvda-addonIl 22/09/2019 23:29, Betsy Grenevitch ha scritto:


Let them know if it works well now.
Adriano


I cannot figure out how to copy what it says but it says it is 7.1.


Betsy from Georgia


On 9/22/2019 5:25 PM, Adriano Barbieri via Groups.Io wrote:

Betsy,

Ok, I've seen.
I know this error was present in previous versions and was fixed.Let's see what Weather_Plus version you are exactly using: nvda menu, tools submenu, manage addons.
Press w until find Weather_Plus and read de version.


Adriano

Or press tab and press the button about add-on and confirm if it is 7.1 version.Il 22/09/2019 23:09, Betsy Grenevitch ha scritto:

INFO - __main__ (17:04:02.259):
Starting NVDA
INFO - core.main (17:04:03.118):
Config dir: C:\Users\baseb\AppData\Roaming\nvda
INFO - config.ConfigManager._loadConfig (17:04:03.118):
Loading config: C:\Users\baseb\AppData\Roaming\nvda\nvda.ini
INFO - core.main (17:04:03.486):
NVDA version 2019.2
INFO - core.main (17:04:03.486):
Using Windows version 10.0.18362 workstation
INFO - core.main (17:04:03.486):
Using Python version 2.7.16 (v2.7.16:413a49145e, Mar  4 2019, 01:30:55) [MSC v.1500 32 bit (Intel)]
INFO - core.main (17:04:03.486):
Using comtypes version 1.1.7
INFO - core.main (17:04:03.486):
Using configobj version 5.1.0 with validate version 1.0.1
INFO - synthDriverHandler.setSynth (17:04:05.686):
Loaded synthDriver eloquence
INFO - core.main (17:04:06.338):
Using wx version 4.0.3 msw (phoenix) wxWidgets 3.0.5
INFO - brailleInput.initialize (17:04:06.339):
Braille input initialized
INFO - braille.initialize (17:04:06.348):
Using liblouis version 3.10.0
INFO - braille.BrailleHandler.setDisplayByName (17:04:06.359):
Loaded braille display driver noBraille, current display has 0 cells.
WARNING - core.main (17:04:06.467):
Java Access Bridge not available
INFO - _UIAHandler.UIAHandler.MTAThreadFunc (17:04:06.517):
UIAutomation: IUIAutomation6
INFO - core.main (17:04:12.048):
NVDA initialized
ERROR - unhandled exception (17:08:15.556):
Traceback (most recent call last):
  File "C:\Users\baseb\AppData\Roaming\nvda\addons\Weather_Plus\globalPlugins\Weather_Plus\__init__.py", line 212, in onSetZipCodeDialog
  File "C:\Users\baseb\AppData\Roaming\nvda\addons\Weather_Plus\globalPlugins\Weather_Plus\__init__.py", line 2242, in __init__
  File "C:\Users\baseb\AppData\Roaming\nvda\addons\Weather_Plus\globalPlugins\Weather_Plus\__init__.py", line 2561, in OnChoice
NameError: global name '_volume' is not defined

-- 
Betsy Grenevitch
678=862-3876


Betsy Grenevitch
 

I cannot figure out how to copy what it says but it says it is 7.1.


Betsy from Georgia


On 9/22/2019 5:25 PM, Adriano Barbieri via Groups.Io wrote:

Betsy,

Ok, I've seen.
I know this error was present in previous versions and was fixed.Let's see what Weather_Plus version you are exactly using: nvda menu, tools submenu, manage addons.
Press w until find Weather_Plus and read de version.


Adriano

Or press tab and press the button about add-on and confirm if it is 7.1 version.Il 22/09/2019 23:09, Betsy Grenevitch ha scritto:

INFO - __main__ (17:04:02.259):
Starting NVDA
INFO - core.main (17:04:03.118):
Config dir: C:\Users\baseb\AppData\Roaming\nvda
INFO - config.ConfigManager._loadConfig (17:04:03.118):
Loading config: C:\Users\baseb\AppData\Roaming\nvda\nvda.ini
INFO - core.main (17:04:03.486):
NVDA version 2019.2
INFO - core.main (17:04:03.486):
Using Windows version 10.0.18362 workstation
INFO - core.main (17:04:03.486):
Using Python version 2.7.16 (v2.7.16:413a49145e, Mar  4 2019, 01:30:55) [MSC v.1500 32 bit (Intel)]
INFO - core.main (17:04:03.486):
Using comtypes version 1.1.7
INFO - core.main (17:04:03.486):
Using configobj version 5.1.0 with validate version 1.0.1
INFO - synthDriverHandler.setSynth (17:04:05.686):
Loaded synthDriver eloquence
INFO - core.main (17:04:06.338):
Using wx version 4.0.3 msw (phoenix) wxWidgets 3.0.5
INFO - brailleInput.initialize (17:04:06.339):
Braille input initialized
INFO - braille.initialize (17:04:06.348):
Using liblouis version 3.10.0
INFO - braille.BrailleHandler.setDisplayByName (17:04:06.359):
Loaded braille display driver noBraille, current display has 0 cells.
WARNING - core.main (17:04:06.467):
Java Access Bridge not available
INFO - _UIAHandler.UIAHandler.MTAThreadFunc (17:04:06.517):
UIAutomation: IUIAutomation6
INFO - core.main (17:04:12.048):
NVDA initialized
ERROR - unhandled exception (17:08:15.556):
Traceback (most recent call last):
  File "C:\Users\baseb\AppData\Roaming\nvda\addons\Weather_Plus\globalPlugins\Weather_Plus\__init__.py", line 212, in onSetZipCodeDialog
  File "C:\Users\baseb\AppData\Roaming\nvda\addons\Weather_Plus\globalPlugins\Weather_Plus\__init__.py", line 2242, in __init__
  File "C:\Users\baseb\AppData\Roaming\nvda\addons\Weather_Plus\globalPlugins\Weather_Plus\__init__.py", line 2561, in OnChoice
NameError: global name '_volume' is not defined

-- 
Betsy Grenevitch
678=862-3876


Adriano Barbieri
 

Betsy,

Ok, I've seen.
I know this error was present in previous versions and was fixed.Let's see what Weather_Plus version you are exactly using: nvda menu, tools submenu, manage addons.
Press w until find Weather_Plus and read de version.


Adriano

Or press tab and press the button about add-on and confirm if it is 7.1 version.Il 22/09/2019 23:09, Betsy Grenevitch ha scritto:

INFO - __main__ (17:04:02.259):
Starting NVDA
INFO - core.main (17:04:03.118):
Config dir: C:\Users\baseb\AppData\Roaming\nvda
INFO - config.ConfigManager._loadConfig (17:04:03.118):
Loading config: C:\Users\baseb\AppData\Roaming\nvda\nvda.ini
INFO - core.main (17:04:03.486):
NVDA version 2019.2
INFO - core.main (17:04:03.486):
Using Windows version 10.0.18362 workstation
INFO - core.main (17:04:03.486):
Using Python version 2.7.16 (v2.7.16:413a49145e, Mar  4 2019, 01:30:55) [MSC v.1500 32 bit (Intel)]
INFO - core.main (17:04:03.486):
Using comtypes version 1.1.7
INFO - core.main (17:04:03.486):
Using configobj version 5.1.0 with validate version 1.0.1
INFO - synthDriverHandler.setSynth (17:04:05.686):
Loaded synthDriver eloquence
INFO - core.main (17:04:06.338):
Using wx version 4.0.3 msw (phoenix) wxWidgets 3.0.5
INFO - brailleInput.initialize (17:04:06.339):
Braille input initialized
INFO - braille.initialize (17:04:06.348):
Using liblouis version 3.10.0
INFO - braille.BrailleHandler.setDisplayByName (17:04:06.359):
Loaded braille display driver noBraille, current display has 0 cells.
WARNING - core.main (17:04:06.467):
Java Access Bridge not available
INFO - _UIAHandler.UIAHandler.MTAThreadFunc (17:04:06.517):
UIAutomation: IUIAutomation6
INFO - core.main (17:04:12.048):
NVDA initialized
ERROR - unhandled exception (17:08:15.556):
Traceback (most recent call last):
  File "C:\Users\baseb\AppData\Roaming\nvda\addons\Weather_Plus\globalPlugins\Weather_Plus\__init__.py", line 212, in onSetZipCodeDialog
  File "C:\Users\baseb\AppData\Roaming\nvda\addons\Weather_Plus\globalPlugins\Weather_Plus\__init__.py", line 2242, in __init__
  File "C:\Users\baseb\AppData\Roaming\nvda\addons\Weather_Plus\globalPlugins\Weather_Plus\__init__.py", line 2561, in OnChoice
NameError: global name '_volume' is not defined


Betsy Grenevitch
 

INFO - __main__ (17:04:02.259):
Starting NVDA
INFO - core.main (17:04:03.118):
Config dir: C:\Users\baseb\AppData\Roaming\nvda
INFO - config.ConfigManager._loadConfig (17:04:03.118):
Loading config: C:\Users\baseb\AppData\Roaming\nvda\nvda.ini
INFO - core.main (17:04:03.486):
NVDA version 2019.2
INFO - core.main (17:04:03.486):
Using Windows version 10.0.18362 workstation
INFO - core.main (17:04:03.486):
Using Python version 2.7.16 (v2.7.16:413a49145e, Mar  4 2019, 01:30:55) [MSC v.1500 32 bit (Intel)]
INFO - core.main (17:04:03.486):
Using comtypes version 1.1.7
INFO - core.main (17:04:03.486):
Using configobj version 5.1.0 with validate version 1.0.1
INFO - synthDriverHandler.setSynth (17:04:05.686):
Loaded synthDriver eloquence
INFO - core.main (17:04:06.338):
Using wx version 4.0.3 msw (phoenix) wxWidgets 3.0.5
INFO - brailleInput.initialize (17:04:06.339):
Braille input initialized
INFO - braille.initialize (17:04:06.348):
Using liblouis version 3.10.0
INFO - braille.BrailleHandler.setDisplayByName (17:04:06.359):
Loaded braille display driver noBraille, current display has 0 cells.
WARNING - core.main (17:04:06.467):
Java Access Bridge not available
INFO - _UIAHandler.UIAHandler.MTAThreadFunc (17:04:06.517):
UIAutomation: IUIAutomation6
INFO - core.main (17:04:12.048):
NVDA initialized
ERROR - unhandled exception (17:08:15.556):
Traceback (most recent call last):
  File "C:\Users\baseb\AppData\Roaming\nvda\addons\Weather_Plus\globalPlugins\Weather_Plus\__init__.py", line 212, in onSetZipCodeDialog
  File "C:\Users\baseb\AppData\Roaming\nvda\addons\Weather_Plus\globalPlugins\Weather_Plus\__init__.py", line 2242, in __init__
  File "C:\Users\baseb\AppData\Roaming\nvda\addons\Weather_Plus\globalPlugins\Weather_Plus\__init__.py", line 2561, in OnChoice
NameError: global name '_volume' is not defined

On 9/22/2019 4:54 PM, Adriano Barbieri via Groups.Io wrote:

Hi Betsy,


This log contains no error indications for Weather_Plus.
You should try again to open the settings window, enter the city, etc. until you reproduce the problem you are experiencing.
At this point, please send me the log again.

Thanks


Regards
Adriano


Il 22/09/2019 22:44, Betsy Grenevitch ha scritto:

I just send you the log. I have written down those directions in case I ever need them again. Thank you for such good instructions. Thank you for your patience. I look forward to getting this resolved so I can enjoy the app once again.


Betsy from Georgia


On 9/22/2019 7:24 AM, Adriano Barbieri via Groups.Io wrote:

Hi Betsy,

Press nvda menu, tools, view log.
Select all with control+a.
Reply this message and paste the log with control+v and send it.


Adriano


Il 22/09/2019 13:10, Betsy Grenevitch ha scritto:

I am actually the one trying to use it. How do I send a log? This is far above what I know how to do. All I can tell you at this point is when I try to check the weather it says I do not have an ID. Please send me privately if you want to, step by step of how to send you the log.


Thank you so much.


Betsy from Georgia

blindangel61@...


On 9/22/2019 6:42 AM, Adriano Barbieri via Groups.Io wrote:

Hi,
Can you please send the log of your friend, so i try at least I can understand the problem?
Thanks


Regards
Adriano


Il 22/09/2019 12:34, Chris Mullins ha scritto:

Hi

I have a friend who is getting exactly the same problem as Betsy has described.  When trying to use NVDA+w to get the forecast, he get a a message saying his WOE Id is missing, and when he tries to access the “Set and manage your cities” dialog from the Weather Plus Settings menu, Weather Plus just terminates without any error message.

 

Cheers

Chris  

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Betsy Grenevitch
Sent: 22 September 2019 04:30
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather_Plus7.1 update available

 

I am sorry I am such a bother but for some reason since I turned my computer back on the weather ad--on no longer works. When I go under preferences, weather plus settings, and enter on the one about setting cities it takes me out of there. I cannot even get to the settings I need to set up like I did this morning. I have no idea what I am doing wrong or why it stopped working once the laptop was shut down.

 

I am using the latest version of NVDA and Windows 10.

 

I would sure appreciate any help you could give to me.

 

Also once we get it working again, hopefully someone can help me, where do I have to be to use the keystrokes such as the ones for settings entering a city, etc.?

 

Maybe I should not have done this but I uninstalled the ad-on and installed it again and still the same problem exists. This is why I am usually afraid to install and set up programs on my own. I was so proud this morning that the only thing I needed my daughter to help me with was to put in the city.

 

 

Thank you so much.

 

Betsy from Georgia

 

On 9/21/2019 1:56 PM, Betsy Grenevitch via Groups.Io wrote:

Thank you for the tip of where to go to do the settings. I just wanted to let you know that the combo box is not really a combo box according to my sighted daughter who is great with teaching blind/visually impaired people things about computers, as you have to type in the city first and then the combo box comes up with the choice of states. That is where I got hung up on finishing the settings. Thank you again for this app. I know I am going to enjoy it.

 

Betsy from Georgia

 

On 9/21/2019 1:32 PM, Betsy Grenevitch via Groups.Io wrote:

When I installed the ad-on and it read the help message it did not tell me how to set up an ID or anything like that. I am still very much a novice with things like this and would really appreciate knowing where to find a step=by-step of how to use the program. I would like to thank whoever worked on this program but please realize that some of us are not experts with computers and programs.

 

On 9/21/2019 8:31 AM, Adriano Barbieri via Groups.Io wrote:

Hi,

Every addon you install displays a manifest message, you often find all the information you need to use it, often there is also a button that opens the documentation.
If the addon is already installed you can see the manifest by accessing from tools, manage add-ons or from preferences, weather_plus settings, documentation.

 

Regards
Adriano

 

Il 21/09/2019 14:14, Betsy Grenevitch ha scritto:

Once the weather app  is downloaded how does it work? IN other words, what are the keystrokes to use the app. By the way, whoever did the clock app that was discussed recently, I am really enjoying hearing the clock every half hour. It brings back memories of the old cuckoo clock my family used to have.

 

 

On 9/21/2019 7:30 AM, Adriano Barbieri via Groups.Io wrote:

Hi to every one,

 

Important changes in this version 7.1:
• Fixed bug in Removeupdate() during addon restart if the file is set in read only.

Weather_Plus can update itself, however you can download it from the following pages:
http://www.nvda.it/files/plugin/weather_plus7.1.nvda-addon
Or:
https://addons.nvda-project.org/addons/Weather_Plus.en.html

I wish thank Noelia, Abdel, Rémy, Zvonimir and all the translators for support this addon.

Greetings
Adriano
   

-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876


Betsy Grenevitch
 

I had to restart NVDA so it may have wiped out the time I tried to check the cities. I will send it one more time.



On 9/22/2019 5:05 PM, Betsy Grenevitch via Groups.Io wrote:

INFO - __main__ (17:04:02.259):
Starting NVDA
INFO - core.main (17:04:03.118):
Config dir: C:\Users\baseb\AppData\Roaming\nvda
INFO - config.ConfigManager._loadConfig (17:04:03.118):
Loading config: C:\Users\baseb\AppData\Roaming\nvda\nvda.ini
INFO - core.main (17:04:03.486):
NVDA version 2019.2
INFO - core.main (17:04:03.486):
Using Windows version 10.0.18362 workstation
INFO - core.main (17:04:03.486):
Using Python version 2.7.16 (v2.7.16:413a49145e, Mar  4 2019, 01:30:55) [MSC v.1500 32 bit (Intel)]
INFO - core.main (17:04:03.486):
Using comtypes version 1.1.7
INFO - core.main (17:04:03.486):
Using configobj version 5.1.0 with validate version 1.0.1
INFO - synthDriverHandler.setSynth (17:04:05.686):
Loaded synthDriver eloquence
INFO - core.main (17:04:06.338):
Using wx version 4.0.3 msw (phoenix) wxWidgets 3.0.5
INFO - brailleInput.initialize (17:04:06.339):
Braille input initialized
INFO - braille.initialize (17:04:06.348):
Using liblouis version 3.10.0
INFO - braille.BrailleHandler.setDisplayByName (17:04:06.359):
Loaded braille display driver noBraille, current display has 0 cells.
WARNING - core.main (17:04:06.467):
Java Access Bridge not available
INFO - _UIAHandler.UIAHandler.MTAThreadFunc (17:04:06.517):
UIAutomation: IUIAutomation6
INFO - core.main (17:04:12.048):
NVDA initialized

On 9/22/2019 4:54 PM, Adriano Barbieri via Groups.Io wrote:

Hi Betsy,


This log contains no error indications for Weather_Plus.
You should try again to open the settings window, enter the city, etc. until you reproduce the problem you are experiencing.
At this point, please send me the log again.

Thanks


Regards
Adriano


Il 22/09/2019 22:44, Betsy Grenevitch ha scritto:

I just send you the log. I have written down those directions in case I ever need them again. Thank you for such good instructions. Thank you for your patience. I look forward to getting this resolved so I can enjoy the app once again.


Betsy from Georgia


On 9/22/2019 7:24 AM, Adriano Barbieri via Groups.Io wrote:

Hi Betsy,

Press nvda menu, tools, view log.
Select all with control+a.
Reply this message and paste the log with control+v and send it.


Adriano


Il 22/09/2019 13:10, Betsy Grenevitch ha scritto:

I am actually the one trying to use it. How do I send a log? This is far above what I know how to do. All I can tell you at this point is when I try to check the weather it says I do not have an ID. Please send me privately if you want to, step by step of how to send you the log.


Thank you so much.


Betsy from Georgia

blindangel61@...


On 9/22/2019 6:42 AM, Adriano Barbieri via Groups.Io wrote:

Hi,
Can you please send the log of your friend, so i try at least I can understand the problem?
Thanks


Regards
Adriano


Il 22/09/2019 12:34, Chris Mullins ha scritto:

Hi

I have a friend who is getting exactly the same problem as Betsy has described.  When trying to use NVDA+w to get the forecast, he get a a message saying his WOE Id is missing, and when he tries to access the “Set and manage your cities” dialog from the Weather Plus Settings menu, Weather Plus just terminates without any error message.

 

Cheers

Chris  

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Betsy Grenevitch
Sent: 22 September 2019 04:30
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather_Plus7.1 update available

 

I am sorry I am such a bother but for some reason since I turned my computer back on the weather ad--on no longer works. When I go under preferences, weather plus settings, and enter on the one about setting cities it takes me out of there. I cannot even get to the settings I need to set up like I did this morning. I have no idea what I am doing wrong or why it stopped working once the laptop was shut down.

 

I am using the latest version of NVDA and Windows 10.

 

I would sure appreciate any help you could give to me.

 

Also once we get it working again, hopefully someone can help me, where do I have to be to use the keystrokes such as the ones for settings entering a city, etc.?

 

Maybe I should not have done this but I uninstalled the ad-on and installed it again and still the same problem exists. This is why I am usually afraid to install and set up programs on my own. I was so proud this morning that the only thing I needed my daughter to help me with was to put in the city.

 

 

Thank you so much.

 

Betsy from Georgia

 

On 9/21/2019 1:56 PM, Betsy Grenevitch via Groups.Io wrote:

Thank you for the tip of where to go to do the settings. I just wanted to let you know that the combo box is not really a combo box according to my sighted daughter who is great with teaching blind/visually impaired people things about computers, as you have to type in the city first and then the combo box comes up with the choice of states. That is where I got hung up on finishing the settings. Thank you again for this app. I know I am going to enjoy it.

 

Betsy from Georgia

 

On 9/21/2019 1:32 PM, Betsy Grenevitch via Groups.Io wrote:

When I installed the ad-on and it read the help message it did not tell me how to set up an ID or anything like that. I am still very much a novice with things like this and would really appreciate knowing where to find a step=by-step of how to use the program. I would like to thank whoever worked on this program but please realize that some of us are not experts with computers and programs.

 

On 9/21/2019 8:31 AM, Adriano Barbieri via Groups.Io wrote:

Hi,

Every addon you install displays a manifest message, you often find all the information you need to use it, often there is also a button that opens the documentation.
If the addon is already installed you can see the manifest by accessing from tools, manage add-ons or from preferences, weather_plus settings, documentation.

 

Regards
Adriano

 

Il 21/09/2019 14:14, Betsy Grenevitch ha scritto:

Once the weather app  is downloaded how does it work? IN other words, what are the keystrokes to use the app. By the way, whoever did the clock app that was discussed recently, I am really enjoying hearing the clock every half hour. It brings back memories of the old cuckoo clock my family used to have.

 

 

On 9/21/2019 7:30 AM, Adriano Barbieri via Groups.Io wrote:

Hi to every one,

 

Important changes in this version 7.1:
• Fixed bug in Removeupdate() during addon restart if the file is set in read only.

Weather_Plus can update itself, however you can download it from the following pages:
http://www.nvda.it/files/plugin/weather_plus7.1.nvda-addon
Or:
https://addons.nvda-project.org/addons/Weather_Plus.en.html

I wish thank Noelia, Abdel, Rémy, Zvonimir and all the translators for support this addon.

Greetings
Adriano
   

-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876


Betsy Grenevitch
 

INFO - __main__ (17:04:02.259):
Starting NVDA
INFO - core.main (17:04:03.118):
Config dir: C:\Users\baseb\AppData\Roaming\nvda
INFO - config.ConfigManager._loadConfig (17:04:03.118):
Loading config: C:\Users\baseb\AppData\Roaming\nvda\nvda.ini
INFO - core.main (17:04:03.486):
NVDA version 2019.2
INFO - core.main (17:04:03.486):
Using Windows version 10.0.18362 workstation
INFO - core.main (17:04:03.486):
Using Python version 2.7.16 (v2.7.16:413a49145e, Mar  4 2019, 01:30:55) [MSC v.1500 32 bit (Intel)]
INFO - core.main (17:04:03.486):
Using comtypes version 1.1.7
INFO - core.main (17:04:03.486):
Using configobj version 5.1.0 with validate version 1.0.1
INFO - synthDriverHandler.setSynth (17:04:05.686):
Loaded synthDriver eloquence
INFO - core.main (17:04:06.338):
Using wx version 4.0.3 msw (phoenix) wxWidgets 3.0.5
INFO - brailleInput.initialize (17:04:06.339):
Braille input initialized
INFO - braille.initialize (17:04:06.348):
Using liblouis version 3.10.0
INFO - braille.BrailleHandler.setDisplayByName (17:04:06.359):
Loaded braille display driver noBraille, current display has 0 cells.
WARNING - core.main (17:04:06.467):
Java Access Bridge not available
INFO - _UIAHandler.UIAHandler.MTAThreadFunc (17:04:06.517):
UIAutomation: IUIAutomation6
INFO - core.main (17:04:12.048):
NVDA initialized

On 9/22/2019 4:54 PM, Adriano Barbieri via Groups.Io wrote:

Hi Betsy,


This log contains no error indications for Weather_Plus.
You should try again to open the settings window, enter the city, etc. until you reproduce the problem you are experiencing.
At this point, please send me the log again.

Thanks


Regards
Adriano


Il 22/09/2019 22:44, Betsy Grenevitch ha scritto:

I just send you the log. I have written down those directions in case I ever need them again. Thank you for such good instructions. Thank you for your patience. I look forward to getting this resolved so I can enjoy the app once again.


Betsy from Georgia


On 9/22/2019 7:24 AM, Adriano Barbieri via Groups.Io wrote:

Hi Betsy,

Press nvda menu, tools, view log.
Select all with control+a.
Reply this message and paste the log with control+v and send it.


Adriano


Il 22/09/2019 13:10, Betsy Grenevitch ha scritto:

I am actually the one trying to use it. How do I send a log? This is far above what I know how to do. All I can tell you at this point is when I try to check the weather it says I do not have an ID. Please send me privately if you want to, step by step of how to send you the log.


Thank you so much.


Betsy from Georgia

blindangel61@...


On 9/22/2019 6:42 AM, Adriano Barbieri via Groups.Io wrote:

Hi,
Can you please send the log of your friend, so i try at least I can understand the problem?
Thanks


Regards
Adriano


Il 22/09/2019 12:34, Chris Mullins ha scritto:

Hi

I have a friend who is getting exactly the same problem as Betsy has described.  When trying to use NVDA+w to get the forecast, he get a a message saying his WOE Id is missing, and when he tries to access the “Set and manage your cities” dialog from the Weather Plus Settings menu, Weather Plus just terminates without any error message.

 

Cheers

Chris  

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Betsy Grenevitch
Sent: 22 September 2019 04:30
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather_Plus7.1 update available

 

I am sorry I am such a bother but for some reason since I turned my computer back on the weather ad--on no longer works. When I go under preferences, weather plus settings, and enter on the one about setting cities it takes me out of there. I cannot even get to the settings I need to set up like I did this morning. I have no idea what I am doing wrong or why it stopped working once the laptop was shut down.

 

I am using the latest version of NVDA and Windows 10.

 

I would sure appreciate any help you could give to me.

 

Also once we get it working again, hopefully someone can help me, where do I have to be to use the keystrokes such as the ones for settings entering a city, etc.?

 

Maybe I should not have done this but I uninstalled the ad-on and installed it again and still the same problem exists. This is why I am usually afraid to install and set up programs on my own. I was so proud this morning that the only thing I needed my daughter to help me with was to put in the city.

 

 

Thank you so much.

 

Betsy from Georgia

 

On 9/21/2019 1:56 PM, Betsy Grenevitch via Groups.Io wrote:

Thank you for the tip of where to go to do the settings. I just wanted to let you know that the combo box is not really a combo box according to my sighted daughter who is great with teaching blind/visually impaired people things about computers, as you have to type in the city first and then the combo box comes up with the choice of states. That is where I got hung up on finishing the settings. Thank you again for this app. I know I am going to enjoy it.

 

Betsy from Georgia

 

On 9/21/2019 1:32 PM, Betsy Grenevitch via Groups.Io wrote:

When I installed the ad-on and it read the help message it did not tell me how to set up an ID or anything like that. I am still very much a novice with things like this and would really appreciate knowing where to find a step=by-step of how to use the program. I would like to thank whoever worked on this program but please realize that some of us are not experts with computers and programs.

 

On 9/21/2019 8:31 AM, Adriano Barbieri via Groups.Io wrote:

Hi,

Every addon you install displays a manifest message, you often find all the information you need to use it, often there is also a button that opens the documentation.
If the addon is already installed you can see the manifest by accessing from tools, manage add-ons or from preferences, weather_plus settings, documentation.

 

Regards
Adriano

 

Il 21/09/2019 14:14, Betsy Grenevitch ha scritto:

Once the weather app  is downloaded how does it work? IN other words, what are the keystrokes to use the app. By the way, whoever did the clock app that was discussed recently, I am really enjoying hearing the clock every half hour. It brings back memories of the old cuckoo clock my family used to have.

 

 

On 9/21/2019 7:30 AM, Adriano Barbieri via Groups.Io wrote:

Hi to every one,

 

Important changes in this version 7.1:
• Fixed bug in Removeupdate() during addon restart if the file is set in read only.

Weather_Plus can update itself, however you can download it from the following pages:
http://www.nvda.it/files/plugin/weather_plus7.1.nvda-addon
Or:
https://addons.nvda-project.org/addons/Weather_Plus.en.html

I wish thank Noelia, Abdel, Rémy, Zvonimir and all the translators for support this addon.

Greetings
Adriano
   

-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876


Chris Mullins
 

 

Hi Betsy

The log file you sent looks like you have just started up your laptop, then copied the log and sent it.  You need to try accessing the city settings in Windows Plus to  get to that point where it doesn’t work, then copy the log and send it.  Adriano can then look for any error information that might be present in the log data.

 

Cheers

Chris

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Betsy Grenevitch
Sent: 22 September 2019 21:47
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather_Plus7.1 update available

 

Thanks Chris, I will try this and see if anything changes. I just find it strange that it worked fine until I shut down the laptop.

 

Betsy from Georgia

On 9/22/2019 6:19 AM, Chris Mullins wrote:

Hi Betsy

If, like me, you find the nvda+control+shift+alt+w an extremely difficult keystroke to press, there is an easier way to get to the same place in the Weather Plus Settings, though it’s a slightly longer route.  Try the following:

  1. Open the NVDA menu using NVDA+n
  2. Press the letter p to open the preferences sub-menu
  3. Press the letter s until you find “Weather Plus Settings sub-menu s”, and press enter
  4. Press the letter m to open the “Set and manage your cities” dialog box.


You are now at the same point as if you had pressed the keys in step 1 of Adriano’s instructions

 

Cheers

Chris

you would have be  

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Betsy Grenevitch
Sent: 22 September 2019 03:26
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather_Plus7.1 update available

 

Thank you so much. I have written down these steps. I will see if I can get it working again. I turned off my computer while I was gone and now the weather says I do not have an ID.

 

Betsy from Georgia

 

On 9/21/2019 1:54 PM, Adriano Barbieri via Groups.Io wrote:

Hi,

 

1. press nvda+control+shift+alt+w.
2. in the edit box digit the city you want to find.
3. press "test" button.
4 if the city is valid you can feel a beep acute, you can now see the details wen press "details" bbutton "Details" and you can set to default the city or simply add to your list withbuttons respectively "Preset" or "Add".
5. Now if you you are satisfied press the button"Ok".
Done!

If you want to learn more about the other features of Weather_Plus you must read the readme.html file you find on the
nvda menu, preferences submenu, weather plus settings, documentation.

Regards
Adriano

 

Il 21/09/2019 19:32, Betsy Grenevitch ha scritto:

When I installed the ad-on and it read the help message it did not tell me how to set up an ID or anything like that. I am still very much a novice with things like this and would really appreciate knowing where to find a step=by-step of how to use the program. I would like to thank whoever worked on this program but please realize that some of us are not experts with computers and programs.

 

On 9/21/2019 8:31 AM, Adriano Barbieri via Groups.Io wrote:

Hi,

Every addon you install displays a manifest message, you often find all the information you need to use it, often there is also a button that opens the documentation.
If the addon is already installed you can see the manifest by accessing from tools, manage add-ons or from preferences, weather_plus settings, documentation.

 

Regards
Adriano

 

Il 21/09/2019 14:14, Betsy Grenevitch ha scritto:

Once the weather app  is downloaded how does it work? IN other words, what are the keystrokes to use the app. By the way, whoever did the clock app that was discussed recently, I am really enjoying hearing the clock every half hour. It brings back memories of the old cuckoo clock my family used to have.

 

 

On 9/21/2019 7:30 AM, Adriano Barbieri via Groups.Io wrote:

Hi to every one,

 

Important changes in this version 7.1:
• Fixed bug in Removeupdate() during addon restart if the file is set in read only.

Weather_Plus can update itself, however you can download it from the following pages:
http://www.nvda.it/files/plugin/weather_plus7.1.nvda-addon
Or:
https://addons.nvda-project.org/addons/Weather_Plus.en.html

I wish thank Noelia, Abdel, Rémy, Zvonimir and all the translators for support this addon.

Greetings
Adriano
   

-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876


Adriano Barbieri
 

Hi Betsy,


This log contains no error indications for Weather_Plus.
You should try again to open the settings window, enter the city, etc. until you reproduce the problem you are experiencing.
At this point, please send me the log again.

Thanks


Regards
Adriano


Il 22/09/2019 22:44, Betsy Grenevitch ha scritto:

I just send you the log. I have written down those directions in case I ever need them again. Thank you for such good instructions. Thank you for your patience. I look forward to getting this resolved so I can enjoy the app once again.


Betsy from Georgia


On 9/22/2019 7:24 AM, Adriano Barbieri via Groups.Io wrote:

Hi Betsy,

Press nvda menu, tools, view log.
Select all with control+a.
Reply this message and paste the log with control+v and send it.


Adriano


Il 22/09/2019 13:10, Betsy Grenevitch ha scritto:

I am actually the one trying to use it. How do I send a log? This is far above what I know how to do. All I can tell you at this point is when I try to check the weather it says I do not have an ID. Please send me privately if you want to, step by step of how to send you the log.


Thank you so much.


Betsy from Georgia

blindangel61@...


On 9/22/2019 6:42 AM, Adriano Barbieri via Groups.Io wrote:

Hi,
Can you please send the log of your friend, so i try at least I can understand the problem?
Thanks


Regards
Adriano


Il 22/09/2019 12:34, Chris Mullins ha scritto:

Hi

I have a friend who is getting exactly the same problem as Betsy has described.  When trying to use NVDA+w to get the forecast, he get a a message saying his WOE Id is missing, and when he tries to access the “Set and manage your cities” dialog from the Weather Plus Settings menu, Weather Plus just terminates without any error message.

 

Cheers

Chris  

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Betsy Grenevitch
Sent: 22 September 2019 04:30
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather_Plus7.1 update available

 

I am sorry I am such a bother but for some reason since I turned my computer back on the weather ad--on no longer works. When I go under preferences, weather plus settings, and enter on the one about setting cities it takes me out of there. I cannot even get to the settings I need to set up like I did this morning. I have no idea what I am doing wrong or why it stopped working once the laptop was shut down.

 

I am using the latest version of NVDA and Windows 10.

 

I would sure appreciate any help you could give to me.

 

Also once we get it working again, hopefully someone can help me, where do I have to be to use the keystrokes such as the ones for settings entering a city, etc.?

 

Maybe I should not have done this but I uninstalled the ad-on and installed it again and still the same problem exists. This is why I am usually afraid to install and set up programs on my own. I was so proud this morning that the only thing I needed my daughter to help me with was to put in the city.

 

 

Thank you so much.

 

Betsy from Georgia

 

On 9/21/2019 1:56 PM, Betsy Grenevitch via Groups.Io wrote:

Thank you for the tip of where to go to do the settings. I just wanted to let you know that the combo box is not really a combo box according to my sighted daughter who is great with teaching blind/visually impaired people things about computers, as you have to type in the city first and then the combo box comes up with the choice of states. That is where I got hung up on finishing the settings. Thank you again for this app. I know I am going to enjoy it.

 

Betsy from Georgia

 

On 9/21/2019 1:32 PM, Betsy Grenevitch via Groups.Io wrote:

When I installed the ad-on and it read the help message it did not tell me how to set up an ID or anything like that. I am still very much a novice with things like this and would really appreciate knowing where to find a step=by-step of how to use the program. I would like to thank whoever worked on this program but please realize that some of us are not experts with computers and programs.

 

On 9/21/2019 8:31 AM, Adriano Barbieri via Groups.Io wrote:

Hi,

Every addon you install displays a manifest message, you often find all the information you need to use it, often there is also a button that opens the documentation.
If the addon is already installed you can see the manifest by accessing from tools, manage add-ons or from preferences, weather_plus settings, documentation.

 

Regards
Adriano

 

Il 21/09/2019 14:14, Betsy Grenevitch ha scritto:

Once the weather app  is downloaded how does it work? IN other words, what are the keystrokes to use the app. By the way, whoever did the clock app that was discussed recently, I am really enjoying hearing the clock every half hour. It brings back memories of the old cuckoo clock my family used to have.

 

 

On 9/21/2019 7:30 AM, Adriano Barbieri via Groups.Io wrote:

Hi to every one,

 

Important changes in this version 7.1:
• Fixed bug in Removeupdate() during addon restart if the file is set in read only.

Weather_Plus can update itself, however you can download it from the following pages:
http://www.nvda.it/files/plugin/weather_plus7.1.nvda-addon
Or:
https://addons.nvda-project.org/addons/Weather_Plus.en.html

I wish thank Noelia, Abdel, Rémy, Zvonimir and all the translators for support this addon.

Greetings
Adriano
   

-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876


Betsy Grenevitch
 

Chris, it still is not letting me open the dialog box for the cities. It kicks me out entirely.


Betsy from Georgia


On 9/22/2019 6:19 AM, Chris Mullins wrote:

Hi Betsy

If, like me, you find the nvda+control+shift+alt+w an extremely difficult keystroke to press, there is an easier way to get to the same place in the Weather Plus Settings, though it’s a slightly longer route.  Try the following:

  1. Open the NVDA menu using NVDA+n
  2. Press the letter p to open the preferences sub-menu
  3. Press the letter s until you find “Weather Plus Settings sub-menu s”, and press enter
  4. Press the letter m to open the “Set and manage your cities” dialog box.

You are now at the same point as if you had pressed the keys in step 1 of Adriano’s instructions

 

Cheers

Chris

you would have be  

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Betsy Grenevitch
Sent: 22 September 2019 03:26
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather_Plus7.1 update available

 

Thank you so much. I have written down these steps. I will see if I can get it working again. I turned off my computer while I was gone and now the weather says I do not have an ID.

 

Betsy from Georgia

 

On 9/21/2019 1:54 PM, Adriano Barbieri via Groups.Io wrote:

Hi,

 

1. press nvda+control+shift+alt+w.
2. in the edit box digit the city you want to find.
3. press "test" button.
4 if the city is valid you can feel a beep acute, you can now see the details wen press "details" bbutton "Details" and you can set to default the city or simply add to your list withbuttons respectively "Preset" or "Add".
5. Now if you you are satisfied press the button"Ok".
Done!

If you want to learn more about the other features of Weather_Plus you must read the readme.html file you find on the
nvda menu, preferences submenu, weather plus settings, documentation.

Regards
Adriano

 

Il 21/09/2019 19:32, Betsy Grenevitch ha scritto:

When I installed the ad-on and it read the help message it did not tell me how to set up an ID or anything like that. I am still very much a novice with things like this and would really appreciate knowing where to find a step=by-step of how to use the program. I would like to thank whoever worked on this program but please realize that some of us are not experts with computers and programs.

 

On 9/21/2019 8:31 AM, Adriano Barbieri via Groups.Io wrote:

Hi,

Every addon you install displays a manifest message, you often find all the information you need to use it, often there is also a button that opens the documentation.
If the addon is already installed you can see the manifest by accessing from tools, manage add-ons or from preferences, weather_plus settings, documentation.

 

Regards
Adriano

 

Il 21/09/2019 14:14, Betsy Grenevitch ha scritto:

Once the weather app  is downloaded how does it work? IN other words, what are the keystrokes to use the app. By the way, whoever did the clock app that was discussed recently, I am really enjoying hearing the clock every half hour. It brings back memories of the old cuckoo clock my family used to have.

 

 

On 9/21/2019 7:30 AM, Adriano Barbieri via Groups.Io wrote:

Hi to every one,

 

Important changes in this version 7.1:
• Fixed bug in Removeupdate() during addon restart if the file is set in read only.

Weather_Plus can update itself, however you can download it from the following pages:
http://www.nvda.it/files/plugin/weather_plus7.1.nvda-addon
Or:
https://addons.nvda-project.org/addons/Weather_Plus.en.html

I wish thank Noelia, Abdel, Rémy, Zvonimir and all the translators for support this addon.

Greetings
Adriano
   

-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876


Betsy Grenevitch
 

Thanks Chris, I will try this and see if anything changes. I just find it strange that it worked fine until I shut down the laptop.


Betsy from Georgia

On 9/22/2019 6:19 AM, Chris Mullins wrote:

Hi Betsy

If, like me, you find the nvda+control+shift+alt+w an extremely difficult keystroke to press, there is an easier way to get to the same place in the Weather Plus Settings, though it’s a slightly longer route.  Try the following:

  1. Open the NVDA menu using NVDA+n
  2. Press the letter p to open the preferences sub-menu
  3. Press the letter s until you find “Weather Plus Settings sub-menu s”, and press enter
  4. Press the letter m to open the “Set and manage your cities” dialog box.

You are now at the same point as if you had pressed the keys in step 1 of Adriano’s instructions

 

Cheers

Chris

you would have be  

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Betsy Grenevitch
Sent: 22 September 2019 03:26
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather_Plus7.1 update available

 

Thank you so much. I have written down these steps. I will see if I can get it working again. I turned off my computer while I was gone and now the weather says I do not have an ID.

 

Betsy from Georgia

 

On 9/21/2019 1:54 PM, Adriano Barbieri via Groups.Io wrote:

Hi,

 

1. press nvda+control+shift+alt+w.
2. in the edit box digit the city you want to find.
3. press "test" button.
4 if the city is valid you can feel a beep acute, you can now see the details wen press "details" bbutton "Details" and you can set to default the city or simply add to your list withbuttons respectively "Preset" or "Add".
5. Now if you you are satisfied press the button"Ok".
Done!

If you want to learn more about the other features of Weather_Plus you must read the readme.html file you find on the
nvda menu, preferences submenu, weather plus settings, documentation.

Regards
Adriano

 

Il 21/09/2019 19:32, Betsy Grenevitch ha scritto:

When I installed the ad-on and it read the help message it did not tell me how to set up an ID or anything like that. I am still very much a novice with things like this and would really appreciate knowing where to find a step=by-step of how to use the program. I would like to thank whoever worked on this program but please realize that some of us are not experts with computers and programs.

 

On 9/21/2019 8:31 AM, Adriano Barbieri via Groups.Io wrote:

Hi,

Every addon you install displays a manifest message, you often find all the information you need to use it, often there is also a button that opens the documentation.
If the addon is already installed you can see the manifest by accessing from tools, manage add-ons or from preferences, weather_plus settings, documentation.

 

Regards
Adriano

 

Il 21/09/2019 14:14, Betsy Grenevitch ha scritto:

Once the weather app  is downloaded how does it work? IN other words, what are the keystrokes to use the app. By the way, whoever did the clock app that was discussed recently, I am really enjoying hearing the clock every half hour. It brings back memories of the old cuckoo clock my family used to have.

 

 

On 9/21/2019 7:30 AM, Adriano Barbieri via Groups.Io wrote:

Hi to every one,

 

Important changes in this version 7.1:
• Fixed bug in Removeupdate() during addon restart if the file is set in read only.

Weather_Plus can update itself, however you can download it from the following pages:
http://www.nvda.it/files/plugin/weather_plus7.1.nvda-addon
Or:
https://addons.nvda-project.org/addons/Weather_Plus.en.html

I wish thank Noelia, Abdel, Rémy, Zvonimir and all the translators for support this addon.

Greetings
Adriano
   

-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876


Betsy Grenevitch
 

I just send you the log. I have written down those directions in case I ever need them again. Thank you for such good instructions. Thank you for your patience. I look forward to getting this resolved so I can enjoy the app once again.


Betsy from Georgia


On 9/22/2019 7:24 AM, Adriano Barbieri via Groups.Io wrote:

Hi Betsy,

Press nvda menu, tools, view log.
Select all with control+a.
Reply this message and paste the log with control+v and send it.


Adriano


Il 22/09/2019 13:10, Betsy Grenevitch ha scritto:

I am actually the one trying to use it. How do I send a log? This is far above what I know how to do. All I can tell you at this point is when I try to check the weather it says I do not have an ID. Please send me privately if you want to, step by step of how to send you the log.


Thank you so much.


Betsy from Georgia

blindangel61@...


On 9/22/2019 6:42 AM, Adriano Barbieri via Groups.Io wrote:

Hi,
Can you please send the log of your friend, so i try at least I can understand the problem?
Thanks


Regards
Adriano


Il 22/09/2019 12:34, Chris Mullins ha scritto:

Hi

I have a friend who is getting exactly the same problem as Betsy has described.  When trying to use NVDA+w to get the forecast, he get a a message saying his WOE Id is missing, and when he tries to access the “Set and manage your cities” dialog from the Weather Plus Settings menu, Weather Plus just terminates without any error message.

 

Cheers

Chris  

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Betsy Grenevitch
Sent: 22 September 2019 04:30
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather_Plus7.1 update available

 

I am sorry I am such a bother but for some reason since I turned my computer back on the weather ad--on no longer works. When I go under preferences, weather plus settings, and enter on the one about setting cities it takes me out of there. I cannot even get to the settings I need to set up like I did this morning. I have no idea what I am doing wrong or why it stopped working once the laptop was shut down.

 

I am using the latest version of NVDA and Windows 10.

 

I would sure appreciate any help you could give to me.

 

Also once we get it working again, hopefully someone can help me, where do I have to be to use the keystrokes such as the ones for settings entering a city, etc.?

 

Maybe I should not have done this but I uninstalled the ad-on and installed it again and still the same problem exists. This is why I am usually afraid to install and set up programs on my own. I was so proud this morning that the only thing I needed my daughter to help me with was to put in the city.

 

 

Thank you so much.

 

Betsy from Georgia

 

On 9/21/2019 1:56 PM, Betsy Grenevitch via Groups.Io wrote:

Thank you for the tip of where to go to do the settings. I just wanted to let you know that the combo box is not really a combo box according to my sighted daughter who is great with teaching blind/visually impaired people things about computers, as you have to type in the city first and then the combo box comes up with the choice of states. That is where I got hung up on finishing the settings. Thank you again for this app. I know I am going to enjoy it.

 

Betsy from Georgia

 

On 9/21/2019 1:32 PM, Betsy Grenevitch via Groups.Io wrote:

When I installed the ad-on and it read the help message it did not tell me how to set up an ID or anything like that. I am still very much a novice with things like this and would really appreciate knowing where to find a step=by-step of how to use the program. I would like to thank whoever worked on this program but please realize that some of us are not experts with computers and programs.

 

On 9/21/2019 8:31 AM, Adriano Barbieri via Groups.Io wrote:

Hi,

Every addon you install displays a manifest message, you often find all the information you need to use it, often there is also a button that opens the documentation.
If the addon is already installed you can see the manifest by accessing from tools, manage add-ons or from preferences, weather_plus settings, documentation.

 

Regards
Adriano

 

Il 21/09/2019 14:14, Betsy Grenevitch ha scritto:

Once the weather app  is downloaded how does it work? IN other words, what are the keystrokes to use the app. By the way, whoever did the clock app that was discussed recently, I am really enjoying hearing the clock every half hour. It brings back memories of the old cuckoo clock my family used to have.

 

 

On 9/21/2019 7:30 AM, Adriano Barbieri via Groups.Io wrote:

Hi to every one,

 

Important changes in this version 7.1:
• Fixed bug in Removeupdate() during addon restart if the file is set in read only.

Weather_Plus can update itself, however you can download it from the following pages:
http://www.nvda.it/files/plugin/weather_plus7.1.nvda-addon
Or:
https://addons.nvda-project.org/addons/Weather_Plus.en.html

I wish thank Noelia, Abdel, Rémy, Zvonimir and all the translators for support this addon.

Greetings
Adriano
   

-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876


Betsy Grenevitch
 

INFO - __main__ (16:30:09.210):
Starting NVDA
INFO - core.main (16:30:10.555):
Config dir: C:\Users\baseb\AppData\Roaming\nvda
INFO - config.ConfigManager._loadConfig (16:30:10.555):
Loading config: C:\Users\baseb\AppData\Roaming\nvda\nvda.ini
INFO - core.main (16:30:11.395):
NVDA version 2019.2
INFO - core.main (16:30:11.395):
Using Windows version 10.0.18362 workstation
INFO - core.main (16:30:11.395):
Using Python version 2.7.16 (v2.7.16:413a49145e, Mar  4 2019, 01:30:55) [MSC v.1500 32 bit (Intel)]
INFO - core.main (16:30:11.395):
Using comtypes version 1.1.7
INFO - core.main (16:30:11.395):
Using configobj version 5.1.0 with validate version 1.0.1
INFO - synthDriverHandler.setSynth (16:30:14.993):
Loaded synthDriver eloquence
INFO - core.main (16:30:16.733):
Using wx version 4.0.3 msw (phoenix) wxWidgets 3.0.5
INFO - brailleInput.initialize (16:30:16.743):
Braille input initialized
INFO - braille.initialize (16:30:16.743):
Using liblouis version 3.10.0
INFO - braille.BrailleHandler.setDisplayByName (16:30:16.763):
Loaded braille display driver noBraille, current display has 0 cells.
WARNING - core.main (16:30:16.855):
Java Access Bridge not available
INFO - _UIAHandler.UIAHandler.MTAThreadFunc (16:30:16.926):
UIAutomation: IUIAutomation6
INFO - core.main (16:30:39.141):
NVDA initialized

On 9/22/2019 7:24 AM, Adriano Barbieri via Groups.Io wrote:

Hi Betsy,

Press nvda menu, tools, view log.
Select all with control+a.
Reply this message and paste the log with control+v and send it.


Adriano


Il 22/09/2019 13:10, Betsy Grenevitch ha scritto:

I am actually the one trying to use it. How do I send a log? This is far above what I know how to do. All I can tell you at this point is when I try to check the weather it says I do not have an ID. Please send me privately if you want to, step by step of how to send you the log.


Thank you so much.


Betsy from Georgia

blindangel61@...


On 9/22/2019 6:42 AM, Adriano Barbieri via Groups.Io wrote:

Hi,
Can you please send the log of your friend, so i try at least I can understand the problem?
Thanks


Regards
Adriano


Il 22/09/2019 12:34, Chris Mullins ha scritto:

Hi

I have a friend who is getting exactly the same problem as Betsy has described.  When trying to use NVDA+w to get the forecast, he get a a message saying his WOE Id is missing, and when he tries to access the “Set and manage your cities” dialog from the Weather Plus Settings menu, Weather Plus just terminates without any error message.

 

Cheers

Chris  

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Betsy Grenevitch
Sent: 22 September 2019 04:30
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather_Plus7.1 update available

 

I am sorry I am such a bother but for some reason since I turned my computer back on the weather ad--on no longer works. When I go under preferences, weather plus settings, and enter on the one about setting cities it takes me out of there. I cannot even get to the settings I need to set up like I did this morning. I have no idea what I am doing wrong or why it stopped working once the laptop was shut down.

 

I am using the latest version of NVDA and Windows 10.

 

I would sure appreciate any help you could give to me.

 

Also once we get it working again, hopefully someone can help me, where do I have to be to use the keystrokes such as the ones for settings entering a city, etc.?

 

Maybe I should not have done this but I uninstalled the ad-on and installed it again and still the same problem exists. This is why I am usually afraid to install and set up programs on my own. I was so proud this morning that the only thing I needed my daughter to help me with was to put in the city.

 

 

Thank you so much.

 

Betsy from Georgia

 

On 9/21/2019 1:56 PM, Betsy Grenevitch via Groups.Io wrote:

Thank you for the tip of where to go to do the settings. I just wanted to let you know that the combo box is not really a combo box according to my sighted daughter who is great with teaching blind/visually impaired people things about computers, as you have to type in the city first and then the combo box comes up with the choice of states. That is where I got hung up on finishing the settings. Thank you again for this app. I know I am going to enjoy it.

 

Betsy from Georgia

 

On 9/21/2019 1:32 PM, Betsy Grenevitch via Groups.Io wrote:

When I installed the ad-on and it read the help message it did not tell me how to set up an ID or anything like that. I am still very much a novice with things like this and would really appreciate knowing where to find a step=by-step of how to use the program. I would like to thank whoever worked on this program but please realize that some of us are not experts with computers and programs.

 

On 9/21/2019 8:31 AM, Adriano Barbieri via Groups.Io wrote:

Hi,

Every addon you install displays a manifest message, you often find all the information you need to use it, often there is also a button that opens the documentation.
If the addon is already installed you can see the manifest by accessing from tools, manage add-ons or from preferences, weather_plus settings, documentation.

 

Regards
Adriano

 

Il 21/09/2019 14:14, Betsy Grenevitch ha scritto:

Once the weather app  is downloaded how does it work? IN other words, what are the keystrokes to use the app. By the way, whoever did the clock app that was discussed recently, I am really enjoying hearing the clock every half hour. It brings back memories of the old cuckoo clock my family used to have.

 

 

On 9/21/2019 7:30 AM, Adriano Barbieri via Groups.Io wrote:

Hi to every one,

 

Important changes in this version 7.1:
• Fixed bug in Removeupdate() during addon restart if the file is set in read only.

Weather_Plus can update itself, however you can download it from the following pages:
http://www.nvda.it/files/plugin/weather_plus7.1.nvda-addon
Or:
https://addons.nvda-project.org/addons/Weather_Plus.en.html

I wish thank Noelia, Abdel, Rémy, Zvonimir and all the translators for support this addon.

Greetings
Adriano
   

-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876


Betsy Grenevitch
 

There is only one weather folder but it does not give the version that I can tell. I am leaving now but will be back this afternoon.


Thanks so much for your help.


Betsy from Georgia

blindangel61@...

On 9/22/2019 1:55 AM, Adriano Barbieri via Groups.Io wrote:

Hi,

It looks like you are running 2 different versions of bWeather_Plus.
The id required was from the old version 5.0, you must instead use the last 7.1.
Let's try to verify this:
1. press Windows key.
2. enter "%appdata%\nvda\addons" without quotation marks and press enter key.
3 Now see if there are more than one named folder with Weather plus or Weather_Plus and let me know that I will tell you how to proceed.


Don't worry, I'll help you.


Regards
Adriano


Il 22/09/2019 05:29, Betsy Grenevitch ha scritto:

I am sorry I am such a bother but for some reason since I turned my computer back on the weather ad--on no longer works. When I go under preferences, weather plus settings, and enter on the one about setting cities it takes me out of there. I cannot even get to the settings I need to set up like I did this morning. I have no idea what I am doing wrong or why it stopped working once the laptop was shut down.


I am using the latest version of NVDA and Windows 10.


I would sure appreciate any help you could give to me.


Also once we get it working again, hopefully someone can help me, where do I have to be to use the keystrokes such as the ones for settings entering a city, etc.?


Maybe I should not have done this but I uninstalled the ad-on and installed it again and still the same problem exists. This is why I am usually afraid to install and set up programs on my own. I was so proud this morning that the only thing I needed my daughter to help me with was to put in the city.



Thank you so much.


Betsy from Georgia


On 9/21/2019 1:56 PM, Betsy Grenevitch via Groups.Io wrote:

Thank you for the tip of where to go to do the settings. I just wanted to let you know that the combo box is not really a combo box according to my sighted daughter who is great with teaching blind/visually impaired people things about computers, as you have to type in the city first and then the combo box comes up with the choice of states. That is where I got hung up on finishing the settings. Thank you again for this app. I know I am going to enjoy it.


Betsy from Georgia


On 9/21/2019 1:32 PM, Betsy Grenevitch via Groups.Io wrote:

When I installed the ad-on and it read the help message it did not tell me how to set up an ID or anything like that. I am still very much a novice with things like this and would really appreciate knowing where to find a step=by-step of how to use the program. I would like to thank whoever worked on this program but please realize that some of us are not experts with computers and programs.


On 9/21/2019 8:31 AM, Adriano Barbieri via Groups.Io wrote:

Hi,

Every addon you install displays a manifest message, you often find all the information you need to use it, often there is also a button that opens the documentation.
If the addon is already installed you can see the manifest by accessing from tools, manage add-ons or from preferences, weather_plus settings, documentation.


Regards
Adriano


Il 21/09/2019 14:14, Betsy Grenevitch ha scritto:

Once the weather app  is downloaded how does it work? IN other words, what are the keystrokes to use the app. By the way, whoever did the clock app that was discussed recently, I am really enjoying hearing the clock every half hour. It brings back memories of the old cuckoo clock my family used to have.



On 9/21/2019 7:30 AM, Adriano Barbieri via Groups.Io wrote:

Hi to every one,


Important changes in this version 7.1:
• Fixed bug in Removeupdate() during addon restart if the file is set in read only.

Weather_Plus can update itself, however you can download it from the following pages:
http://www.nvda.it/files/plugin/weather_plus7.1.nvda-addon
Or:
https://addons.nvda-project.org/addons/Weather_Plus.en.html

I wish thank Noelia, Abdel, Rémy, Zvonimir and all the translators for support this addon.

Greetings
Adriano
   

-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876
-- 
Betsy Grenevitch
678=862-3876