Help With Eloquence


Ibrahim Ajayi
 

Hi good people:
I've just installed a copy of codefactory elequence expressive ad on
for NVDA, and I am starting with the trial version.
The program has been properly installed, and I've gone through the
settings. But I cannot find the program in the synthesiser sub-menu
of NVDA.
Please can anyone help me understand what could have gone wrong, or
what I didn't do properly?
Regards.
I am Ibrahim Ajayi from Nigeria.


Jacques Stassen <j@...>
 

There are two flavours of Eloquence sold by Code Factory. Have you installed the add-on or the SAPI5 version? If the latter, you'll find it under SAPI5 voices.


Jacques

On 27/08/2017 04:27, Ibrahim Ajayi wrote:
Hi good people:
I've just installed a copy of codefactory elequence expressive ad on
for NVDA, and I am starting with the trial version.
The program has been properly installed, and I've gone through the
settings. But I cannot find the program in the synthesiser sub-menu
of NVDA.
Please can anyone help me understand what could have gone wrong, or
what I didn't do properly?
Regards.
I am Ibrahim Ajayi from Nigeria.


Gene
 

please don't leave the group when you don't want to get mail from it.  Every time you unsubscribe, when you subscribe and send a message, the first message you send has to be approved.  Every new member has to have his first message approved.  This is a setting list administrators can't change.  It is a setting set by the entire list serve administrator.
 
Please go nomail so that every time you want to start receiving mail and discuss something, the first message you send doesn't have to be approved.  While messages are generally approved quickly or reasonbly promptly, you may wait many hours perhaps six or eight if neeither the owner or I look at the list because we are busy or sleeping. 
To go nomail, send a blank message to
To resume receiving mail as individual messages, send a message to
That will resume single delivery if you have gone nomail.
 
Regarding your problem, did you shut down NVDA and run it again after installing the add on? 
 
Also, do you know about the SAPI5 Eloquence from, as I recall Code Factory?  The eloquence in the add on you are trying has lots of annoying artifacts.  The SAPI 5 Eloquence sounds as it should.  You can get a demo of that version as well.  If you have problems finding it, asking here should get you the information. 
 
Gene

----- Original Message -----
Sent: Saturday, August 26, 2017 9:27 PM
Subject: [nvda] Help With Eloquence

Hi good people:
I've just installed a copy of codefactory elequence expressive ad on
for NVDA, and I am starting with the trial version.
The program has been properly installed, and I've gone through the
settings.  But I cannot find the program in the synthesiser sub-menu
of NVDA.
Please can anyone help me understand what could have gone wrong, or
what I didn't do properly?
Regards.
I am Ibrahim Ajayi from Nigeria.



mattias
 

Open nvda menu insert+n

2 times down Arrow

There is a submenu called codefactory

There should it be

 

Skickades från E-post för Windows 10

 

Från: Gene
Skickat: den 27 augusti 2017 09:54
Till: nvda@nvda.groups.io
Ämne: Re: [nvda] Help With Eloquence

 

please don't leave the group when you don't want to get mail from it.  Every time you unsubscribe, when you subscribe and send a message, the first message you send has to be approved.  Every new member has to have his first message approved.  This is a setting list administrators can't change.  It is a setting set by the entire list serve administrator.

 

Please go nomail so that every time you want to start receiving mail and discuss something, the first message you send doesn't have to be approved.  While messages are generally approved quickly or reasonbly promptly, you may wait many hours perhaps six or eight if neeither the owner or I look at the list because we are busy or sleeping. 

To go nomail, send a blank message to

To resume receiving mail as individual messages, send a message to

That will resume single delivery if you have gone nomail.

 

Regarding your problem, did you shut down NVDA and run it again after installing the add on? 

 

Also, do you know about the SAPI5 Eloquence from, as I recall Code Factory?  The eloquence in the add on you are trying has lots of annoying artifacts.  The SAPI 5 Eloquence sounds as it should.  You can get a demo of that version as well.  If you have problems finding it, asking here should get you the information. 

 

Gene

----- Original Message -----

Sent: Saturday, August 26, 2017 9:27 PM

Subject: [nvda] Help With Eloquence

 

Hi good people:
I've just installed a copy of codefactory elequence expressive ad on
for NVDA, and I am starting with the trial version.
The program has been properly installed, and I've gone through the
settings.  But I cannot find the program in the synthesiser sub-menu
of NVDA.
Please can anyone help me understand what could have gone wrong, or
what I didn't do properly?
Regards.
I am Ibrahim Ajayi from Nigeria.

 


mr. Chikodinaka Nickarandidum Oguledo
 

I need the link 2the jaws add on for NVDA hq please or large
voices/addpns for nvda NVDA is my favorit favorit creenreader in the
world

On 8/27/17, mattias <mjonsson1986@gmail.com> wrote:
Open nvda menu insert+n
2 times down Arrow
There is a submenu called codefactory
There should it be

Skickades från E-post för Windows 10

Från: Gene
Skickat: den 27 augusti 2017 09:54
Till: nvda@nvda.groups.io
Ämne: Re: [nvda] Help With Eloquence

please don't leave the group when you don't want to get mail from it.  Every
time you unsubscribe, when you subscribe and send a message, the first
message you send has to be approved.  Every new member has to have his first
message approved.  This is a setting list administrators can't change.  It
is a setting set by the entire list serve administrator.

Please go nomail so that every time you want to start receiving mail and
discuss something, the first message you send doesn't have to be approved.
While messages are generally approved quickly or reasonbly promptly, you may
wait many hours perhaps six or eight if neeither the owner or I look at the
list because we are busy or sleeping.
To go nomail, send a blank message to
nvda+nomail@nvda.groups.io
To resume receiving mail as individual messages, send a message to
nvda+single@nvda.groups.io
That will resume single delivery if you have gone nomail.

Regarding your problem, did you shut down NVDA and run it again after
installing the add on?

Also, do you know about the SAPI5 Eloquence from, as I recall Code Factory?
The eloquence in the add on you are trying has lots of annoying artifacts.
The SAPI 5 Eloquence sounds as it should.  You can get a demo of that
version as well.  If you have problems finding it, asking here should get
you the information.

Gene
----- Original Message -----
From: Ibrahim Ajayi
Sent: Saturday, August 26, 2017 9:27 PM
To: nvda@nvda.groups.io
Subject: [nvda] Help With Eloquence

Hi good people:
I've just installed a copy of codefactory elequence expressive ad on
for NVDA, and I am starting with the trial version.
The program has been properly installed, and I've gone through the
settings.  But I cannot find the program in the synthesiser sub-menu
of NVDA.
Please can anyone help me understand what could have gone wrong, or
what I didn't do properly?
Regards.
I am Ibrahim Ajayi from Nigeria.



--
for if you persavear. you will conker never fear. try try try again


matthew dyer
 

Hi,

 

Did you restart NVDA after installing and configuring what you wanted?  Thanks.  Also, to get to the synthesizer dialog, insert+control+S will bring it up and you should do you want.  .

 

Matthew

 

 

 

Sent from Mail for Windows 10

 

From: Ibrahim Ajayi
Sent: Sunday, August 27, 2017 3:13 AM
To: nvda@nvda.groups.io
Subject: [nvda] Help With Eloquence

 

Hi good people:

I've just installed a copy of codefactory elequence expressive ad on

for NVDA, and I am starting with the trial version.

The program has been properly installed, and I've gone through the

settings.  But I cannot find the program in the synthesiser sub-menu

of NVDA.

Please can anyone help me understand what could have gone wrong, or

what I didn't do properly?

Regards.

I am Ibrahim Ajayi from Nigeria.

 

 

 


Virus-free. www.avast.com


Ibrahim Ajayi
 

Please how can I find the SAPI5 version of Eloquence for NVDA. I've
tried unsuccessfully to find it.
Thanks.
From Ibrahim.

On 8/27/17, matthew dyer <ilovecountrymusic483@gmail.com> wrote:
Hi,

Did you restart NVDA after installing and configuring what you wanted?
Thanks. Also, to get to the synthesizer dialog, insert+control+S will bring
it up and you should do you want. .

Matthew



Sent from Mail for Windows 10

From: Ibrahim Ajayi
Sent: Sunday, August 27, 2017 3:13 AM
To: nvda@nvda.groups.io
Subject: [nvda] Help With Eloquence

Hi good people:
I've just installed a copy of codefactory elequence expressive ad on
for NVDA, and I am starting with the trial version.
The program has been properly installed, and I've gone through the
settings. But I cannot find the program in the synthesiser sub-menu
of NVDA.
Please can anyone help me understand what could have gone wrong, or
what I didn't do properly?
Regards.
I am Ibrahim Ajayi from Nigeria.







Rosemarie Chavarria
 

You can't use the jaws eloquence voice because it's tied to Jaws.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of mr. Chikodinaka Nickarandidum Oguledo
Sent: Sunday, August 27, 2017 5:01 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Help With Eloquence

I need the link 2the jaws add on for NVDA hq please or large voices/addpns for nvda NVDA is my favorit favorit creenreader in the world

On 8/27/17, mattias <mjonsson1986@gmail.com> wrote:
Open nvda menu insert+n
2 times down Arrow
There is a submenu called codefactory
There should it be

Skickades från E-post för Windows 10

Från: Gene
Skickat: den 27 augusti 2017 09:54
Till: nvda@nvda.groups.io
Ämne: Re: [nvda] Help With Eloquence

please don't leave the group when you don't want to get mail from it.
Every time you unsubscribe, when you subscribe and send a message, the
first message you send has to be approved. Every new member has to
have his first message approved. This is a setting list
administrators can't change. It is a setting set by the entire list serve administrator.

Please go nomail so that every time you want to start receiving mail
and discuss something, the first message you send doesn't have to be approved.
While messages are generally approved quickly or reasonbly promptly,
you may wait many hours perhaps six or eight if neeither the owner or
I look at the list because we are busy or sleeping.
To go nomail, send a blank message to
nvda+nomail@nvda.groups.io
To resume receiving mail as individual messages, send a message to
nvda+single@nvda.groups.io
That will resume single delivery if you have gone nomail.

Regarding your problem, did you shut down NVDA and run it again after
installing the add on?

Also, do you know about the SAPI5 Eloquence from, as I recall Code Factory?
The eloquence in the add on you are trying has lots of annoying artifacts.
The SAPI 5 Eloquence sounds as it should. You can get a demo of that
version as well. If you have problems finding it, asking here should
get you the information.

Gene
----- Original Message -----
From: Ibrahim Ajayi
Sent: Saturday, August 26, 2017 9:27 PM
To: nvda@nvda.groups.io
Subject: [nvda] Help With Eloquence

Hi good people:
I've just installed a copy of codefactory elequence expressive ad on
for NVDA, and I am starting with the trial version.
The program has been properly installed, and I've gone through the
settings. But I cannot find the program in the synthesiser sub-menu
of NVDA.
Please can anyone help me understand what could have gone wrong, or
what I didn't do properly?
Regards.
I am Ibrahim Ajayi from Nigeria.




--
for if you persavear. you will conker never fear. try try try again


mr. Chikodinaka Nickarandidum Oguledo
 

yes I did. but I need the add on to eliqwence for NVDA everything is readey

On 8/27/17, Rosemarie Chavarria <knitqueen2007@gmail.com> wrote:
You can't use the jaws eloquence voice because it's tied to Jaws.



-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of mr.
Chikodinaka Nickarandidum Oguledo
Sent: Sunday, August 27, 2017 5:01 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Help With Eloquence

I need the link 2the jaws add on for NVDA hq please or large voices/addpns
for nvda NVDA is my favorit favorit creenreader in the world

On 8/27/17, mattias <mjonsson1986@gmail.com> wrote:
Open nvda menu insert+n
2 times down Arrow
There is a submenu called codefactory
There should it be

Skickades från E-post för Windows 10

Från: Gene
Skickat: den 27 augusti 2017 09:54
Till: nvda@nvda.groups.io
Ämne: Re: [nvda] Help With Eloquence

please don't leave the group when you don't want to get mail from it.
Every time you unsubscribe, when you subscribe and send a message, the
first message you send has to be approved. Every new member has to
have his first message approved. This is a setting list
administrators can't change. It is a setting set by the entire list serve
administrator.

Please go nomail so that every time you want to start receiving mail
and discuss something, the first message you send doesn't have to be
approved.
While messages are generally approved quickly or reasonbly promptly,
you may wait many hours perhaps six or eight if neeither the owner or
I look at the list because we are busy or sleeping.
To go nomail, send a blank message to
nvda+nomail@nvda.groups.io
To resume receiving mail as individual messages, send a message to
nvda+single@nvda.groups.io
That will resume single delivery if you have gone nomail.

Regarding your problem, did you shut down NVDA and run it again after
installing the add on?

Also, do you know about the SAPI5 Eloquence from, as I recall Code
Factory?
The eloquence in the add on you are trying has lots of annoying
artifacts.
The SAPI 5 Eloquence sounds as it should. You can get a demo of that
version as well. If you have problems finding it, asking here should
get you the information.

Gene
----- Original Message -----
From: Ibrahim Ajayi
Sent: Saturday, August 26, 2017 9:27 PM
To: nvda@nvda.groups.io
Subject: [nvda] Help With Eloquence

Hi good people:
I've just installed a copy of codefactory elequence expressive ad on
for NVDA, and I am starting with the trial version.
The program has been properly installed, and I've gone through the
settings. But I cannot find the program in the synthesiser sub-menu
of NVDA.
Please can anyone help me understand what could have gone wrong, or
what I didn't do properly?
Regards.
I am Ibrahim Ajayi from Nigeria.




--
for if you persavear. you will conker never fear. try try try again







--
for if you persavear. you will conker never fear. try try try again


Gene
 

What add on?  The paid one?  If you are asking about the illegal add on, information about illegal add ons isn't allowed to be given on list.
 
Gene
----- Original Message -----

Sent: Sunday, August 27, 2017 4:59 PM
Subject: Re: [nvda] Help With Eloquence

yes I did. but I need the add on to eliqwence for NVDA everything is readey

On 8/27/17, Rosemarie Chavarria <knitqueen2007@...> wrote:
> You can't use the jaws eloquence voice because it's tied to Jaws.
>
>
>
> -----Original Message-----
> From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of mr.
> Chikodinaka Nickarandidum Oguledo
> Sent: Sunday, August 27, 2017 5:01 AM
> To: nvda@nvda.groups.io
> Subject: Re: [nvda] Help With Eloquence
>
> I need the link 2the jaws add on for NVDA hq please or large voices/addpns
> for nvda NVDA is my favorit favorit creenreader in the world
>
> On 8/27/17, mattias <mjonsson1986@...> wrote:
>> Open nvda menu insert+n
>> 2 times down Arrow
>> There is a submenu called codefactory
>> There should it be
>>
>> Skickades från E-post för Windows 10
>>
>> Från: Gene
>> Skickat: den 27 augusti 2017 09:54
>> Till: nvda@nvda.groups.io
>> Ämne: Re: [nvda] Help With Eloquence
>>
>> please don't leave the group when you don't want to get mail from it.
>> Every time you unsubscribe, when you subscribe and send a message, the
>> first message you send has to be approved.  Every new member has to
>> have his first message approved.  This is a setting list
>> administrators can't change.  It is a setting set by the entire list serve
>> administrator.
>>
>> Please go nomail so that every time you want to start receiving mail
>> and discuss something, the first message you send doesn't have to be
>> approved.
>> While messages are generally approved quickly or reasonbly promptly,
>> you may wait many hours perhaps six or eight if neeither the owner or
>> I look at the list because we are busy or sleeping.
>> To go nomail, send a blank message to
>> nvda+nomail@nvda.groups.io
>> To resume receiving mail as individual messages, send a message to
>> nvda+single@nvda.groups.io
>> That will resume single delivery if you have gone nomail.
>>
>> Regarding your problem, did you shut down NVDA and run it again after
>> installing the add on?
>>
>> Also, do you know about the SAPI5 Eloquence from, as I recall Code
>> Factory?
>> The eloquence in the add on you are trying has lots of annoying
>> artifacts.
>> The SAPI 5 Eloquence sounds as it should.  You can get a demo of that
>> version as well.  If you have problems finding it, asking here should
>> get you the information.
>>
>> Gene
>> ----- Original Message -----
>> From: Ibrahim Ajayi
>> Sent: Saturday, August 26, 2017 9:27 PM
>> To: nvda@nvda.groups.io
>> Subject: [nvda] Help With Eloquence
>>
>> Hi good people:
>> I've just installed a copy of codefactory elequence expressive ad on
>> for NVDA, and I am starting with the trial version.
>> The program has been properly installed, and I've gone through the
>> settings.  But I cannot find the program in the synthesiser sub-menu
>> of NVDA.
>> Please can anyone help me understand what could have gone wrong, or
>> what I didn't do properly?
>> Regards.
>> I am Ibrahim Ajayi from Nigeria.
>>
>>
>>
>>
>
>
> --
> for if you persavear. you will conker never fear. try try try again
>
>
>
>
>
>
>
>


--
for if you persavear. you will conker never fear. try try try again




Arlene
 

You can get the paid addon for NVDA. The eloquence from Jaws is tied to it. I don’t use eloquence. I just use whatever NVDA came with.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of mr. Chikodinaka Nickarandidum Oguledo
Sent: August-27-17 5:01 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Help With Eloquence

I need the link 2the jaws add on for NVDA hq please or large voices/addpns for nvda NVDA is my favorit favorit creenreader in the world

On 8/27/17, mattias <mjonsson1986@gmail.com> wrote:
Open nvda menu insert+n
2 times down Arrow
There is a submenu called codefactory
There should it be

Skickades från E-post för Windows 10

Från: Gene
Skickat: den 27 augusti 2017 09:54
Till: nvda@nvda.groups.io
Ämne: Re: [nvda] Help With Eloquence

please don't leave the group when you don't want to get mail from it.
Every time you unsubscribe, when you subscribe and send a message, the
first message you send has to be approved. Every new member has to
have his first message approved. This is a setting list
administrators can't change. It is a setting set by the entire list serve administrator.

Please go nomail so that every time you want to start receiving mail
and discuss something, the first message you send doesn't have to be approved.
While messages are generally approved quickly or reasonbly promptly,
you may wait many hours perhaps six or eight if neeither the owner or
I look at the list because we are busy or sleeping.
To go nomail, send a blank message to
nvda+nomail@nvda.groups.io
To resume receiving mail as individual messages, send a message to
nvda+single@nvda.groups.io
That will resume single delivery if you have gone nomail.

Regarding your problem, did you shut down NVDA and run it again after
installing the add on?

Also, do you know about the SAPI5 Eloquence from, as I recall Code Factory?
The eloquence in the add on you are trying has lots of annoying artifacts.
The SAPI 5 Eloquence sounds as it should. You can get a demo of that
version as well. If you have problems finding it, asking here should
get you the information.

Gene
----- Original Message -----
From: Ibrahim Ajayi
Sent: Saturday, August 26, 2017 9:27 PM
To: nvda@nvda.groups.io
Subject: [nvda] Help With Eloquence

Hi good people:
I've just installed a copy of codefactory elequence expressive ad on
for NVDA, and I am starting with the trial version.
The program has been properly installed, and I've gone through the
settings. But I cannot find the program in the synthesiser sub-menu
of NVDA.
Please can anyone help me understand what could have gone wrong, or
what I didn't do properly?
Regards.
I am Ibrahim Ajayi from Nigeria.




--
for if you persavear. you will conker never fear. try try try again


Rosemarie Chavarria
 

You have to pay for that one. You can't get it illegally.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of mr. Chikodinaka Nickarandidum Oguledo
Sent: Sunday, August 27, 2017 3:00 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Help With Eloquence

yes I did. but I need the add on to eliqwence for NVDA everything is readey

On 8/27/17, Rosemarie Chavarria <knitqueen2007@gmail.com> wrote:
You can't use the jaws eloquence voice because it's tied to Jaws.



-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of mr.
Chikodinaka Nickarandidum Oguledo
Sent: Sunday, August 27, 2017 5:01 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Help With Eloquence

I need the link 2the jaws add on for NVDA hq please or large
voices/addpns for nvda NVDA is my favorit favorit creenreader in the
world

On 8/27/17, mattias <mjonsson1986@gmail.com> wrote:
Open nvda menu insert+n
2 times down Arrow
There is a submenu called codefactory There should it be

Skickades från E-post för Windows 10

Från: Gene
Skickat: den 27 augusti 2017 09:54
Till: nvda@nvda.groups.io
Ämne: Re: [nvda] Help With Eloquence

please don't leave the group when you don't want to get mail from it.
Every time you unsubscribe, when you subscribe and send a message,
the first message you send has to be approved. Every new member has
to have his first message approved. This is a setting list
administrators can't change. It is a setting set by the entire list
serve administrator.

Please go nomail so that every time you want to start receiving mail
and discuss something, the first message you send doesn't have to be
approved.
While messages are generally approved quickly or reasonbly promptly,
you may wait many hours perhaps six or eight if neeither the owner or
I look at the list because we are busy or sleeping.
To go nomail, send a blank message to
nvda+nomail@nvda.groups.io
To resume receiving mail as individual messages, send a message to
nvda+single@nvda.groups.io
That will resume single delivery if you have gone nomail.

Regarding your problem, did you shut down NVDA and run it again after
installing the add on?

Also, do you know about the SAPI5 Eloquence from, as I recall Code
Factory?
The eloquence in the add on you are trying has lots of annoying
artifacts.
The SAPI 5 Eloquence sounds as it should. You can get a demo of that
version as well. If you have problems finding it, asking here should
get you the information.

Gene
----- Original Message -----
From: Ibrahim Ajayi
Sent: Saturday, August 26, 2017 9:27 PM
To: nvda@nvda.groups.io
Subject: [nvda] Help With Eloquence

Hi good people:
I've just installed a copy of codefactory elequence expressive ad on
for NVDA, and I am starting with the trial version.
The program has been properly installed, and I've gone through the
settings. But I cannot find the program in the synthesiser sub-menu
of NVDA.
Please can anyone help me understand what could have gone wrong, or
what I didn't do properly?
Regards.
I am Ibrahim Ajayi from Nigeria.




--
for if you persavear. you will conker never fear. try try try again








--
for if you persavear. you will conker never fear. try try try again


Sarah k Alawami
 

Which one is the $59 one that donates a part of the cost to nvda? I think I got the price wrong but this company donates a part of the cost of eloquence to the nvda company. I should add I did google for it but by now lost the link in my over 200 thousand history items I've kept for about 7 years.

Take care all.

On Aug 27, 2017, at 5:23 PM, Rosemarie Chavarria <knitqueen2007@gmail.com> wrote:

You have to pay for that one. You can't get it illegally.



-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of mr. Chikodinaka Nickarandidum Oguledo
Sent: Sunday, August 27, 2017 3:00 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Help With Eloquence

yes I did. but I need the add on to eliqwence for NVDA everything is readey

On 8/27/17, Rosemarie Chavarria <knitqueen2007@gmail.com> wrote:
You can't use the jaws eloquence voice because it's tied to Jaws.



-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of mr.
Chikodinaka Nickarandidum Oguledo
Sent: Sunday, August 27, 2017 5:01 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Help With Eloquence

I need the link 2the jaws add on for NVDA hq please or large
voices/addpns for nvda NVDA is my favorit favorit creenreader in the
world

On 8/27/17, mattias <mjonsson1986@gmail.com> wrote:
Open nvda menu insert+n
2 times down Arrow
There is a submenu called codefactory There should it be

Skickades från E-post för Windows 10

Från: Gene
Skickat: den 27 augusti 2017 09:54
Till: nvda@nvda.groups.io
Ämne: Re: [nvda] Help With Eloquence

please don't leave the group when you don't want to get mail from it.
Every time you unsubscribe, when you subscribe and send a message,
the first message you send has to be approved. Every new member has
to have his first message approved. This is a setting list
administrators can't change. It is a setting set by the entire list
serve administrator.

Please go nomail so that every time you want to start receiving mail
and discuss something, the first message you send doesn't have to be
approved.
While messages are generally approved quickly or reasonbly promptly,
you may wait many hours perhaps six or eight if neeither the owner or
I look at the list because we are busy or sleeping.
To go nomail, send a blank message to
nvda+nomail@nvda.groups.io
To resume receiving mail as individual messages, send a message to
nvda+single@nvda.groups.io
That will resume single delivery if you have gone nomail.

Regarding your problem, did you shut down NVDA and run it again after
installing the add on?

Also, do you know about the SAPI5 Eloquence from, as I recall Code
Factory?
The eloquence in the add on you are trying has lots of annoying
artifacts.
The SAPI 5 Eloquence sounds as it should. You can get a demo of that
version as well. If you have problems finding it, asking here should
get you the information.

Gene
----- Original Message -----
From: Ibrahim Ajayi
Sent: Saturday, August 26, 2017 9:27 PM
To: nvda@nvda.groups.io
Subject: [nvda] Help With Eloquence

Hi good people:
I've just installed a copy of codefactory elequence expressive ad on
for NVDA, and I am starting with the trial version.
The program has been properly installed, and I've gone through the
settings. But I cannot find the program in the synthesiser sub-menu
of NVDA.
Please can anyone help me understand what could have gone wrong, or
what I didn't do properly?
Regards.
I am Ibrahim Ajayi from Nigeria.




--
for if you persavear. you will conker never fear. try try try again








--
for if you persavear. you will conker never fear. try try try again






mr. Chikodinaka Nickarandidum Oguledo
 

is there a free tom or somethah for nvda not payed

On 8/28/17, Sarah k Alawami <marrie12@gmail.com> wrote:
Which one is the $59 one that donates a part of the cost to nvda? I think
I got the price wrong but this company donates a part of the cost of
eloquence to the nvda company. I should add I did google for it but by now
lost the link in my over 200 thousand history items I've kept for about 7
years.

Take care all.
On Aug 27, 2017, at 5:23 PM, Rosemarie Chavarria <knitqueen2007@gmail.com>
wrote:

You have to pay for that one. You can't get it illegally.



-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of mr.
Chikodinaka Nickarandidum Oguledo
Sent: Sunday, August 27, 2017 3:00 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Help With Eloquence

yes I did. but I need the add on to eliqwence for NVDA everything is
readey

On 8/27/17, Rosemarie Chavarria <knitqueen2007@gmail.com> wrote:
You can't use the jaws eloquence voice because it's tied to Jaws.



-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of mr.
Chikodinaka Nickarandidum Oguledo
Sent: Sunday, August 27, 2017 5:01 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Help With Eloquence

I need the link 2the jaws add on for NVDA hq please or large
voices/addpns for nvda NVDA is my favorit favorit creenreader in the
world

On 8/27/17, mattias <mjonsson1986@gmail.com> wrote:
Open nvda menu insert+n
2 times down Arrow
There is a submenu called codefactory There should it be

Skickades från E-post för Windows 10

Från: Gene
Skickat: den 27 augusti 2017 09:54
Till: nvda@nvda.groups.io
Ämne: Re: [nvda] Help With Eloquence

please don't leave the group when you don't want to get mail from it.
Every time you unsubscribe, when you subscribe and send a message,
the first message you send has to be approved. Every new member has
to have his first message approved. This is a setting list
administrators can't change. It is a setting set by the entire list
serve administrator.

Please go nomail so that every time you want to start receiving mail
and discuss something, the first message you send doesn't have to be
approved.
While messages are generally approved quickly or reasonbly promptly,
you may wait many hours perhaps six or eight if neeither the owner or
I look at the list because we are busy or sleeping.
To go nomail, send a blank message to
nvda+nomail@nvda.groups.io
To resume receiving mail as individual messages, send a message to
nvda+single@nvda.groups.io
That will resume single delivery if you have gone nomail.

Regarding your problem, did you shut down NVDA and run it again after
installing the add on?

Also, do you know about the SAPI5 Eloquence from, as I recall Code
Factory?
The eloquence in the add on you are trying has lots of annoying
artifacts.
The SAPI 5 Eloquence sounds as it should. You can get a demo of that
version as well. If you have problems finding it, asking here should
get you the information.

Gene
----- Original Message -----
From: Ibrahim Ajayi
Sent: Saturday, August 26, 2017 9:27 PM
To: nvda@nvda.groups.io
Subject: [nvda] Help With Eloquence

Hi good people:
I've just installed a copy of codefactory elequence expressive ad on
for NVDA, and I am starting with the trial version.
The program has been properly installed, and I've gone through the
settings. But I cannot find the program in the synthesiser sub-menu
of NVDA.
Please can anyone help me understand what could have gone wrong, or
what I didn't do properly?
Regards.
I am Ibrahim Ajayi from Nigeria.




--
for if you persavear. you will conker never fear. try try try again








--
for if you persavear. you will conker never fear. try try try again








--
for if you persavear. you will conker never fear. try try try again


Sarah k Alawami
 

No. You need to buy the add on. See  the prior messages in said thread.

Take care.

On Aug 28, 2017, at 10:11 AM, mr. Chikodinaka Nickarandidum Oguledo <ochikodinaka@...> wrote:

is there a free tom or somethah for nvda not payed

On 8/28/17, Sarah k Alawami <marrie12@...> wrote:
Which  one is the $59 one that donates a part of the cost  to nvda? I think
I got the price wrong but this company donates a part of the cost of
eloquence to the nvda company. I should add I did google for it but by now
lost the link in my over 200 thousand history items I've kept for about 7
years.

Take care all.
On Aug 27, 2017, at 5:23 PM, Rosemarie Chavarria <knitqueen2007@...>
wrote:

You have to pay for that one. You can't get it illegally.



-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of mr.
Chikodinaka Nickarandidum Oguledo
Sent: Sunday, August 27, 2017 3:00 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Help With Eloquence

yes I did. but I need the add on to eliqwence for NVDA everything is
readey

On 8/27/17, Rosemarie Chavarria <knitqueen2007@...> wrote:
You can't use the jaws eloquence voice because it's tied to Jaws.



-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of mr.
Chikodinaka Nickarandidum Oguledo
Sent: Sunday, August 27, 2017 5:01 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Help With Eloquence

I need the link 2the jaws add on for NVDA hq please or large
voices/addpns for nvda NVDA is my favorit favorit creenreader in the
world

On 8/27/17, mattias <mjonsson1986@...> wrote:
Open nvda menu insert+n
2 times down Arrow
There is a submenu called codefactory There should it be

Skickades från E-post för Windows 10

Från: Gene
Skickat: den 27 augusti 2017 09:54
Till: nvda@nvda.groups.io
Ämne: Re: [nvda] Help With Eloquence

please don't leave the group when you don't want to get mail from it.
Every time you unsubscribe, when you subscribe and send a message,
the first message you send has to be approved.  Every new member has
to have his first message approved.  This is a setting list
administrators can't change.  It is a setting set by the entire list
serve administrator.

Please go nomail so that every time you want to start receiving mail
and discuss something, the first message you send doesn't have to be
approved.
While messages are generally approved quickly or reasonbly promptly,
you may wait many hours perhaps six or eight if neeither the owner or
I look at the list because we are busy or sleeping.
To go nomail, send a blank message to
nvda+nomail@nvda.groups.io
To resume receiving mail as individual messages, send a message to
nvda+single@nvda.groups.io
That will resume single delivery if you have gone nomail.

Regarding your problem, did you shut down NVDA and run it again after
installing the add on?

Also, do you know about the SAPI5 Eloquence from, as I recall Code
Factory?
The eloquence in the add on you are trying has lots of annoying
artifacts.
The SAPI 5 Eloquence sounds as it should.  You can get a demo of that
version as well.  If you have problems finding it, asking here should
get you the information.

Gene
----- Original Message -----
From: Ibrahim Ajayi
Sent: Saturday, August 26, 2017 9:27 PM
To: nvda@nvda.groups.io
Subject: [nvda] Help With Eloquence

Hi good people:
I've just installed a copy of codefactory elequence expressive ad on
for NVDA, and I am starting with the trial version.
The program has been properly installed, and I've gone through the
settings.  But I cannot find the program in the synthesiser sub-menu
of NVDA.
Please can anyone help me understand what could have gone wrong, or
what I didn't do properly?
Regards.
I am Ibrahim Ajayi from Nigeria.






--
for if you persavear. you will conker never fear. try try try again










--
for if you persavear. you will conker never fear. try try try again













-- 
for if you persavear. you will conker never fear. try try try again



mr. Chikodinaka Nickarandidum Oguledo
 

witch voices are free witch ones u need to pay for I need all free non
and NVDA voices! where do I go?

On 8/28/17, Sarah k Alawami <marrie12@gmail.com> wrote:
No. You need to buy the add on. See the prior messages in said thread.

Take care.
On Aug 28, 2017, at 10:11 AM, mr. Chikodinaka Nickarandidum Oguledo
<ochikodinaka@gmail.com> wrote:

is there a free tom or somethah for nvda not payed

On 8/28/17, Sarah k Alawami <marrie12@gmail.com
<mailto:marrie12@gmail.com>> wrote:
Which one is the $59 one that donates a part of the cost to nvda? I
think
I got the price wrong but this company donates a part of the cost of
eloquence to the nvda company. I should add I did google for it but by
now
lost the link in my over 200 thousand history items I've kept for about
7
years.

Take care all.
On Aug 27, 2017, at 5:23 PM, Rosemarie Chavarria
<knitqueen2007@gmail.com>
wrote:

You have to pay for that one. You can't get it illegally.



-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of mr.
Chikodinaka Nickarandidum Oguledo
Sent: Sunday, August 27, 2017 3:00 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Help With Eloquence

yes I did. but I need the add on to eliqwence for NVDA everything is
readey

On 8/27/17, Rosemarie Chavarria <knitqueen2007@gmail.com> wrote:
You can't use the jaws eloquence voice because it's tied to Jaws.



-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
mr.
Chikodinaka Nickarandidum Oguledo
Sent: Sunday, August 27, 2017 5:01 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Help With Eloquence

I need the link 2the jaws add on for NVDA hq please or large
voices/addpns for nvda NVDA is my favorit favorit creenreader in the
world

On 8/27/17, mattias <mjonsson1986@gmail.com> wrote:
Open nvda menu insert+n
2 times down Arrow
There is a submenu called codefactory There should it be

Skickades från E-post för Windows 10

Från: Gene
Skickat: den 27 augusti 2017 09:54
Till: nvda@nvda.groups.io
Ämne: Re: [nvda] Help With Eloquence

please don't leave the group when you don't want to get mail from it.
Every time you unsubscribe, when you subscribe and send a message,
the first message you send has to be approved. Every new member has
to have his first message approved. This is a setting list
administrators can't change. It is a setting set by the entire list
serve administrator.

Please go nomail so that every time you want to start receiving mail
and discuss something, the first message you send doesn't have to be
approved.
While messages are generally approved quickly or reasonbly promptly,
you may wait many hours perhaps six or eight if neeither the owner or
I look at the list because we are busy or sleeping.
To go nomail, send a blank message to
nvda+nomail@nvda.groups.io
To resume receiving mail as individual messages, send a message to
nvda+single@nvda.groups.io
That will resume single delivery if you have gone nomail.

Regarding your problem, did you shut down NVDA and run it again after
installing the add on?

Also, do you know about the SAPI5 Eloquence from, as I recall Code
Factory?
The eloquence in the add on you are trying has lots of annoying
artifacts.
The SAPI 5 Eloquence sounds as it should. You can get a demo of that
version as well. If you have problems finding it, asking here should
get you the information.

Gene
----- Original Message -----
From: Ibrahim Ajayi
Sent: Saturday, August 26, 2017 9:27 PM
To: nvda@nvda.groups.io
Subject: [nvda] Help With Eloquence

Hi good people:
I've just installed a copy of codefactory elequence expressive ad on
for NVDA, and I am starting with the trial version.
The program has been properly installed, and I've gone through the
settings. But I cannot find the program in the synthesiser sub-menu
of NVDA.
Please can anyone help me understand what could have gone wrong, or
what I didn't do properly?
Regards.
I am Ibrahim Ajayi from Nigeria.




--
for if you persavear. you will conker never fear. try try try again








--
for if you persavear. you will conker never fear. try try try again









--
for if you persavear. you will conker never fear. try try try again

--
for if you persavear. you will conker never fear. try try try again


Matt Turner
 

I think, that's the sapi5 version from codefactory.

On 8/28/2017 12:00 PM, Sarah k Alawami wrote:
Which one is the $59 one that donates a part of the cost to nvda? I think I got the price wrong but this company donates a part of the cost of eloquence to the nvda company. I should add I did google for it but by now lost the link in my over 200 thousand history items I've kept for about 7 years.

Take care all.
On Aug 27, 2017, at 5:23 PM, Rosemarie Chavarria <knitqueen2007@gmail.com> wrote:

You have to pay for that one. You can't get it illegally.



-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of mr. Chikodinaka Nickarandidum Oguledo
Sent: Sunday, August 27, 2017 3:00 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Help With Eloquence

yes I did. but I need the add on to eliqwence for NVDA everything is readey

On 8/27/17, Rosemarie Chavarria <knitqueen2007@gmail.com> wrote:
You can't use the jaws eloquence voice because it's tied to Jaws.



-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of mr.
Chikodinaka Nickarandidum Oguledo
Sent: Sunday, August 27, 2017 5:01 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Help With Eloquence

I need the link 2the jaws add on for NVDA hq please or large
voices/addpns for nvda NVDA is my favorit favorit creenreader in the
world

On 8/27/17, mattias <mjonsson1986@gmail.com> wrote:
Open nvda menu insert+n
2 times down Arrow
There is a submenu called codefactory There should it be

Skickades från E-post för Windows 10

Från: Gene
Skickat: den 27 augusti 2017 09:54
Till: nvda@nvda.groups.io
Ämne: Re: [nvda] Help With Eloquence

please don't leave the group when you don't want to get mail from it.
Every time you unsubscribe, when you subscribe and send a message,
the first message you send has to be approved. Every new member has
to have his first message approved. This is a setting list
administrators can't change. It is a setting set by the entire list
serve administrator.

Please go nomail so that every time you want to start receiving mail
and discuss something, the first message you send doesn't have to be
approved.
While messages are generally approved quickly or reasonbly promptly,
you may wait many hours perhaps six or eight if neeither the owner or
I look at the list because we are busy or sleeping.
To go nomail, send a blank message to
nvda+nomail@nvda.groups.io
To resume receiving mail as individual messages, send a message to
nvda+single@nvda.groups.io
That will resume single delivery if you have gone nomail.

Regarding your problem, did you shut down NVDA and run it again after
installing the add on?

Also, do you know about the SAPI5 Eloquence from, as I recall Code
Factory?
The eloquence in the add on you are trying has lots of annoying
artifacts.
The SAPI 5 Eloquence sounds as it should. You can get a demo of that
version as well. If you have problems finding it, asking here should
get you the information.

Gene
----- Original Message -----
From: Ibrahim Ajayi
Sent: Saturday, August 26, 2017 9:27 PM
To: nvda@nvda.groups.io
Subject: [nvda] Help With Eloquence

Hi good people:
I've just installed a copy of codefactory elequence expressive ad on
for NVDA, and I am starting with the trial version.
The program has been properly installed, and I've gone through the
settings. But I cannot find the program in the synthesiser sub-menu
of NVDA.
Please can anyone help me understand what could have gone wrong, or
what I didn't do properly?
Regards.
I am Ibrahim Ajayi from Nigeria.



--
for if you persavear. you will conker never fear. try try try again







--
for if you persavear. you will conker never fear. try try try again






Marshall handheld Flax
 

Mr. Oguledo, it is not clear what you need.  I recommend that you stop writing many short requests.  Instead, write one longer email describing:

1. What you're able to do,
2. What you're not able to do,
3. What you've tried.

Thank you!

Marshall

On Mon, Aug 28, 2017 at 1:25 PM, mr. Chikodinaka Nickarandidum Oguledo <ochikodinaka@...> wrote:
witch voices are free witch ones u need to pay for I need all free non
and NVDA voices! where do I go?

On 8/28/17, Sarah k Alawami <marrie12@...> wrote:
> No. You need to buy the add on. See  the prior messages in said thread.
>
> Take care.
>> On Aug 28, 2017, at 10:11 AM, mr. Chikodinaka Nickarandidum Oguledo
>> <ochikodinaka@...> wrote:
>>
>> is there a free tom or somethah for nvda not payed
>>
>> On 8/28/17, Sarah k Alawami <marrie12@...
>> <mailto:marrie12@...>> wrote:
>>> Which  one is the $59 one that donates a part of the cost  to nvda? I
>>> think
>>> I got the price wrong but this company donates a part of the cost of
>>> eloquence to the nvda company. I should add I did google for it but by
>>> now
>>> lost the link in my over 200 thousand history items I've kept for about
>>> 7
>>> years.
>>>
>>> Take care all.
>>>> On Aug 27, 2017, at 5:23 PM, Rosemarie Chavarria
>>>> <knitqueen2007@...>
>>>> wrote:
>>>>
>>>> You have to pay for that one. You can't get it illegally.
>>>>
>>>>
>>>>
>>>> -----Original Message-----
>>>> From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of mr.
>>>> Chikodinaka Nickarandidum Oguledo
>>>> Sent: Sunday, August 27, 2017 3:00 PM
>>>> To: nvda@nvda.groups.io
>>>> Subject: Re: [nvda] Help With Eloquence
>>>>
>>>> yes I did. but I need the add on to eliqwence for NVDA everything is
>>>> readey
>>>>
>>>> On 8/27/17, Rosemarie Chavarria <knitqueen2007@...> wrote:
>>>>> You can't use the jaws eloquence voice because it's tied to Jaws.
>>>>>
>>>>>
>>>>>
>>>>> -----Original Message-----
>>>>> From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
>>>>> mr.
>>>>> Chikodinaka Nickarandidum Oguledo
>>>>> Sent: Sunday, August 27, 2017 5:01 AM
>>>>> To: nvda@nvda.groups.io
>>>>> Subject: Re: [nvda] Help With Eloquence
>>>>>
>>>>> I need the link 2the jaws add on for NVDA hq please or large
>>>>> voices/addpns for nvda NVDA is my favorit favorit creenreader in the
>>>>> world
>>>>>
>>>>> On 8/27/17, mattias <mjonsson1986@...> wrote:
>>>>>> Open nvda menu insert+n
>>>>>> 2 times down Arrow
>>>>>> There is a submenu called codefactory There should it be
>>>>>>
>>>>>> Skickades från E-post för Windows 10
>>>>>>
>>>>>> Från: Gene
>>>>>> Skickat: den 27 augusti 2017 09:54
>>>>>> Till: nvda@nvda.groups.io
>>>>>> Ämne: Re: [nvda] Help With Eloquence
>>>>>>
>>>>>> please don't leave the group when you don't want to get mail from it.
>>>>>> Every time you unsubscribe, when you subscribe and send a message,
>>>>>> the first message you send has to be approved.  Every new member has
>>>>>> to have his first message approved.  This is a setting list
>>>>>> administrators can't change.  It is a setting set by the entire list
>>>>>> serve administrator.
>>>>>>
>>>>>> Please go nomail so that every time you want to start receiving mail
>>>>>> and discuss something, the first message you send doesn't have to be
>>>>>> approved.
>>>>>> While messages are generally approved quickly or reasonbly promptly,
>>>>>> you may wait many hours perhaps six or eight if neeither the owner or
>>>>>> I look at the list because we are busy or sleeping.
>>>>>> To go nomail, send a blank message to
>>>>>> nvda+nomail@nvda.groups.io
>>>>>> To resume receiving mail as individual messages, send a message to
>>>>>> nvda+single@nvda.groups.io
>>>>>> That will resume single delivery if you have gone nomail.
>>>>>>
>>>>>> Regarding your problem, did you shut down NVDA and run it again after
>>>>>> installing the add on?
>>>>>>
>>>>>> Also, do you know about the SAPI5 Eloquence from, as I recall Code
>>>>>> Factory?
>>>>>> The eloquence in the add on you are trying has lots of annoying
>>>>>> artifacts.
>>>>>> The SAPI 5 Eloquence sounds as it should.  You can get a demo of that
>>>>>> version as well.  If you have problems finding it, asking here should
>>>>>> get you the information.
>>>>>>
>>>>>> Gene
>>>>>> ----- Original Message -----
>>>>>> From: Ibrahim Ajayi
>>>>>> Sent: Saturday, August 26, 2017 9:27 PM
>>>>>> To: nvda@nvda.groups.io
>>>>>> Subject: [nvda] Help With Eloquence
>>>>>>
>>>>>> Hi good people:
>>>>>> I've just installed a copy of codefactory elequence expressive ad on
>>>>>> for NVDA, and I am starting with the trial version.
>>>>>> The program has been properly installed, and I've gone through the
>>>>>> settings.  But I cannot find the program in the synthesiser sub-menu
>>>>>> of NVDA.
>>>>>> Please can anyone help me understand what could have gone wrong, or
>>>>>> what I didn't do properly?
>>>>>> Regards.
>>>>>> I am Ibrahim Ajayi from Nigeria.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> for if you persavear. you will conker never fear. try try try again
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> for if you persavear. you will conker never fear. try try try again
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>>
>>>
>>>
>>
>>
>> --
>> for if you persavear. you will conker never fear. try try try again
>>
>>
>
>


--
for if you persavear. you will conker never fear. try try try again





chris judge
 

Hi, Write me off list re eloquence.

Chrisjudge1967@gmail.com

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of mr. Chikodinaka Nickarandidum Oguledo
Sent: August 28, 2017 2:12 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Help With Eloquence

is there a free tom or somethah for nvda not payed

On 8/28/17, Sarah k Alawami <marrie12@gmail.com> wrote:
Which one is the $59 one that donates a part of the cost to nvda? I
think I got the price wrong but this company donates a part of the
cost of eloquence to the nvda company. I should add I did google for
it but by now lost the link in my over 200 thousand history items I've
kept for about 7 years.

Take care all.
On Aug 27, 2017, at 5:23 PM, Rosemarie Chavarria
<knitqueen2007@gmail.com>
wrote:

You have to pay for that one. You can't get it illegally.



-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of mr.
Chikodinaka Nickarandidum Oguledo
Sent: Sunday, August 27, 2017 3:00 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Help With Eloquence

yes I did. but I need the add on to eliqwence for NVDA everything is
readey

On 8/27/17, Rosemarie Chavarria <knitqueen2007@gmail.com> wrote:
You can't use the jaws eloquence voice because it's tied to Jaws.



-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of mr.
Chikodinaka Nickarandidum Oguledo
Sent: Sunday, August 27, 2017 5:01 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Help With Eloquence

I need the link 2the jaws add on for NVDA hq please or large
voices/addpns for nvda NVDA is my favorit favorit creenreader in the
world

On 8/27/17, mattias <mjonsson1986@gmail.com> wrote:
Open nvda menu insert+n
2 times down Arrow
There is a submenu called codefactory There should it be

Skickades från E-post för Windows 10

Från: Gene
Skickat: den 27 augusti 2017 09:54
Till: nvda@nvda.groups.io
Ämne: Re: [nvda] Help With Eloquence

please don't leave the group when you don't want to get mail from it.
Every time you unsubscribe, when you subscribe and send a message,
the first message you send has to be approved. Every new member
has to have his first message approved. This is a setting list
administrators can't change. It is a setting set by the entire
list serve administrator.

Please go nomail so that every time you want to start receiving
mail and discuss something, the first message you send doesn't have
to be approved.
While messages are generally approved quickly or reasonbly
promptly, you may wait many hours perhaps six or eight if neeither
the owner or I look at the list because we are busy or sleeping.
To go nomail, send a blank message to
nvda+nomail@nvda.groups.io
To resume receiving mail as individual messages, send a message to
nvda+single@nvda.groups.io
That will resume single delivery if you have gone nomail.

Regarding your problem, did you shut down NVDA and run it again
after installing the add on?

Also, do you know about the SAPI5 Eloquence from, as I recall Code
Factory?
The eloquence in the add on you are trying has lots of annoying
artifacts.
The SAPI 5 Eloquence sounds as it should. You can get a demo of
that version as well. If you have problems finding it, asking here
should get you the information.

Gene
----- Original Message -----
From: Ibrahim Ajayi
Sent: Saturday, August 26, 2017 9:27 PM
To: nvda@nvda.groups.io
Subject: [nvda] Help With Eloquence

Hi good people:
I've just installed a copy of codefactory elequence expressive ad
on for NVDA, and I am starting with the trial version.
The program has been properly installed, and I've gone through the
settings. But I cannot find the program in the synthesiser
sub-menu of NVDA.
Please can anyone help me understand what could have gone wrong, or
what I didn't do properly?
Regards.
I am Ibrahim Ajayi from Nigeria.




--
for if you persavear. you will conker never fear. try try try again








--
for if you persavear. you will conker never fear. try try try again









--
for if you persavear. you will conker never fear. try try try again


mr. Chikodinaka Nickarandidum Oguledo
 

old lady! did u get my inqwairy?

On 9/2/17, chris judge <chrisjudge1967@gmail.com> wrote:
Hi, Write me off list re eloquence.

Chrisjudge1967@gmail.com

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of mr.
Chikodinaka Nickarandidum Oguledo
Sent: August 28, 2017 2:12 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Help With Eloquence

is there a free tom or somethah for nvda not payed

On 8/28/17, Sarah k Alawami <marrie12@gmail.com> wrote:
Which one is the $59 one that donates a part of the cost to nvda? I
think I got the price wrong but this company donates a part of the
cost of eloquence to the nvda company. I should add I did google for
it but by now lost the link in my over 200 thousand history items I've
kept for about 7 years.

Take care all.
On Aug 27, 2017, at 5:23 PM, Rosemarie Chavarria
<knitqueen2007@gmail.com>
wrote:

You have to pay for that one. You can't get it illegally.



-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of mr.
Chikodinaka Nickarandidum Oguledo
Sent: Sunday, August 27, 2017 3:00 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Help With Eloquence

yes I did. but I need the add on to eliqwence for NVDA everything is
readey

On 8/27/17, Rosemarie Chavarria <knitqueen2007@gmail.com> wrote:
You can't use the jaws eloquence voice because it's tied to Jaws.



-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of mr.
Chikodinaka Nickarandidum Oguledo
Sent: Sunday, August 27, 2017 5:01 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Help With Eloquence

I need the link 2the jaws add on for NVDA hq please or large
voices/addpns for nvda NVDA is my favorit favorit creenreader in the
world

On 8/27/17, mattias <mjonsson1986@gmail.com> wrote:
Open nvda menu insert+n
2 times down Arrow
There is a submenu called codefactory There should it be

Skickades från E-post för Windows 10

Från: Gene
Skickat: den 27 augusti 2017 09:54
Till: nvda@nvda.groups.io
Ämne: Re: [nvda] Help With Eloquence

please don't leave the group when you don't want to get mail from it.
Every time you unsubscribe, when you subscribe and send a message,
the first message you send has to be approved. Every new member
has to have his first message approved. This is a setting list
administrators can't change. It is a setting set by the entire
list serve administrator.

Please go nomail so that every time you want to start receiving
mail and discuss something, the first message you send doesn't have
to be approved.
While messages are generally approved quickly or reasonbly
promptly, you may wait many hours perhaps six or eight if neeither
the owner or I look at the list because we are busy or sleeping.
To go nomail, send a blank message to
nvda+nomail@nvda.groups.io
To resume receiving mail as individual messages, send a message to
nvda+single@nvda.groups.io
That will resume single delivery if you have gone nomail.

Regarding your problem, did you shut down NVDA and run it again
after installing the add on?

Also, do you know about the SAPI5 Eloquence from, as I recall Code
Factory?
The eloquence in the add on you are trying has lots of annoying
artifacts.
The SAPI 5 Eloquence sounds as it should. You can get a demo of
that version as well. If you have problems finding it, asking here
should get you the information.

Gene
----- Original Message -----
From: Ibrahim Ajayi
Sent: Saturday, August 26, 2017 9:27 PM
To: nvda@nvda.groups.io
Subject: [nvda] Help With Eloquence

Hi good people:
I've just installed a copy of codefactory elequence expressive ad
on for NVDA, and I am starting with the trial version.
The program has been properly installed, and I've gone through the
settings. But I cannot find the program in the synthesiser
sub-menu of NVDA.
Please can anyone help me understand what could have gone wrong, or
what I didn't do properly?
Regards.
I am Ibrahim Ajayi from Nigeria.




--
for if you persavear. you will conker never fear. try try try again








--
for if you persavear. you will conker never fear. try try try again









--
for if you persavear. you will conker never fear. try try try again







--
for if you persavear. you will conker never fear. try try try again