|
Hello all,
After starting Total Commander I select the mass re-naming in Total Commander, Nvda is mute by two buttons.
I would like to know, what can I do for Nvda should be speaking.
Nvda speaks everywhere, but by a two buttons it is mute.
--
Jarek
|
|
|
Hi Jarek,
I'm not familiar with the program, but if NVDA is working everywhere except for announcing these two buttons, it sounds like the developers of Total Commander has simply forgotten to label them. The easiest solution is to contact the developer of Total Commander and let them know and request they please label those two buttons.
Kind regards
Quentin.
Hello all,
After starting Total Commander I select the mass re-naming in Total
Commander, Nvda is mute by two buttons.
I would like to know, what can I do for Nvda should be speaking.
Nvda speaks everywhere, but by a two buttons it is mute.
--
Jarek
-- Quentin Christensen
Training and Support Manager
|
|
|
Hi Qentin,
thank you message.
I certainly will write to author of Total Commander.
Jarek
Dne 22.01.2020 v 23:03 Quentin
Christensen napsal(a):
toggle quoted message
Show quoted text
Hi Jarek,
I'm not familiar with the program, but if NVDA is working
everywhere except for announcing these two buttons, it sounds
like the developers of Total Commander has simply forgotten to
label them. The easiest solution is to contact the developer
of Total Commander and let them know and request they please
label those two buttons.
Kind regards
Quentin.
Hello
all,
After starting Total Commander I select the mass re-naming in
Total
Commander, Nvda is mute by two buttons.
I would like to know, what can I do for Nvda should be
speaking.
Nvda speaks everywhere, but by a two buttons it is mute.
--
Jarek
--
Quentin Christensen
Training and Support Manager
|
|
|
Probably not totally relevant, but, the golden cursor add-on
allows you to assign a label to a mouse position, but, suppose
unless mouse cursor was tracking your navigation that wouldn't
help?
Jacob Kruger
Blind Biker
Skype: BlindZA
"...resistance is futile...but, acceptance is versatile..."
On 2020-01-23 12:03 AM, Quentin
Christensen wrote:
toggle quoted message
Show quoted text
Hi Jarek,
I'm not familiar with the program, but if NVDA is working
everywhere except for announcing these two buttons, it sounds
like the developers of Total Commander has simply forgotten to
label them. The easiest solution is to contact the developer
of Total Commander and let them know and request they please
label those two buttons.
Kind regards
Quentin.
Hello
all,
After starting Total Commander I select the mass re-naming in
Total
Commander, Nvda is mute by two buttons.
I would like to know, what can I do for Nvda should be
speaking.
Nvda speaks everywhere, but by a two buttons it is mute.
--
Jarek
--
Quentin Christensen
Training and Support Manager
|
|
|
Hello,
I've been in contact with Chritian Ghisler for years. He solved several inaccessibility issues in both Total commander for Windows and for Android, but some of them he was unable to fix.
He's very accessibility-oriented and willing to help.
Let's write to him again, and see what he can come up with.
I've used Total Commander since the days when it was still called Norton Commander (for DOS) and the nWindows Commander (for Windows), and I couldn't live without it...
Ciao,
Ollie
toggle quoted message
Show quoted text
On 23/01/2020 08:48, Jarek.Krcmar wrote:
Hi Qentin,
thank you message.
I certainly will write to author of Total Commander.
Jarek
Dne 22.01.2020 v 23:03 Quentin Christensen napsal(a):
Hi Jarek,
I'm not familiar with the program, but if NVDA is working everywhere except for announcing these two buttons, it sounds like the developers of Total Commander has simply forgotten to label them. The easiest solution is to contact the developer of Total Commander and let them know and request they please label those two buttons.
Kind regards
Quentin.
On Wed, Jan 22, 2020 at 10:20 PM Jarek.Krcmar <Jarek.Krcmar@... <mailto:Jarek.Krcmar@...>> wrote:
Hello all,
After starting Total Commander I select the mass re-naming in Total
Commander, Nvda is mute by two buttons.
I would like to know, what can I do for Nvda should be speaking.
Nvda speaks everywhere, but by a two buttons it is mute.
--
Jarek
--
Quentin Christensen
Training and Support Manager
Web: www.nvaccess.org <http://www.nvaccess.org/>
Training: https://www.nvaccess.org/shop/
Certification: https://certification.nvaccess.org/
User group: https://nvda.groups.io/g/nvda
Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess <https://twitter.com/NVAccess>
|
|
|
Hello Quentin,
There are other issues, especially in the forms to set up ftp connections, but those can't be solved, apparently.
Ciao,
Ollie
toggle quoted message
Show quoted text
On 22/01/2020 23:03, Quentin Christensen wrote: Hi Jarek,
I'm not familiar with the program, but if NVDA is working everywhere except for announcing these two buttons, it sounds like the developers of Total Commander has simply forgotten to label them. The easiest solution is to contact the developer of Total Commander and let them know and request they please label those two buttons.
Kind regards
Quentin.
On Wed, Jan 22, 2020 at 10:20 PM Jarek.Krcmar <Jarek.Krcmar@... <mailto:Jarek.Krcmar@...>> wrote:
Hello all,
After starting Total Commander I select the mass re-naming in Total
Commander, Nvda is mute by two buttons.
I would like to know, what can I do for Nvda should be speaking.
Nvda speaks everywhere, but by a two buttons it is mute.
--
Jarek
--
Quentin Christensen
Training and Support Manager
Web: www.nvaccess.org <http://www.nvaccess.org/>
Training: https://www.nvaccess.org/shop/
Certification: https://certification.nvaccess.org/
User group: https://nvda.groups.io/g/nvda
Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess <https://twitter.com/NVAccess>
|
|
|
Ollie, what does this program do and how much does it cost? At 05:23 AM 1/23/2020, Mallard, wrote: Hello Quentin,
There are other issues, especially in the forms to set up ftp connections, but those can't be solved, apparently.
Ciao,
Ollie
On 22/01/2020 23:03, Quentin Christensen wrote:
Hi Jarek,
I'm not familiar with the program, but if NVDA is working everywhere except for announcing these two buttons, it sounds like the developers of Total Commander has simply forgotten to label them. The easiest solution is to contact the developer of Total Commander and let them know and request they please label those two buttons.
Kind regards
Quentin.
On Wed, Jan 22, 2020 at 10:20 PM Jarek.Krcmar <Jarek.Krcmar@... <mailto:Jarek.Krcmar@...>> wrote:
Hello all,
After starting Total Commander I select the mass re-naming in Total
Commander, Nvda is mute by two buttons.
I would like to know, what can I do for Nvda should be speaking.
Nvda speaks everywhere, but by a two buttons it is mute.
-- Jarek
--
Quentin Christensen
Training and Support Manager
Web: www.nvaccess.org <http://www.nvaccess.org/>
Training: https://www.nvaccess.org/shop/
Certification: https://certification.nvaccess.org/
User group: https://nvda.groups.io/g/nvda
Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess <https://twitter.com/NVAccess> John
|
|
|
Hello,
It's a two-panel file manager.
The programme is shareware; you can keep it for 30 days without registering, but it continues to fully function even afterthat - actually forever.
I don't know how much it would cost now. I bought so many years ago...
In order to activate the proramme when you open it, if it isn't registered, you simply have to press one of teh numbers on the keyboard - 1, 2 or 3 which is presented at random with each new launching ofthe programme.
You'll hear:
1 button
2 button
3 button
1 1
for example.
You'll have to type the number that doesn't say button after it, bu is repeated twice instead - in this example, 1 1 = type 1 on the keyboard...
After tat the programme will be fully functional.
It has loads of options, and a considerable number of plugins and extensions, but not many are accessible, so I don't use those.
The Android version is free.
hth, ciao,
Ollie
toggle quoted message
Show quoted text
On 23/01/2020 12:20, john s wrote: Ollie, what does this program do and how much does it cost?
At 05:23 AM 1/23/2020, Mallard, wrote:
Hello Quentin,
There are other issues, especially in the forms to set up ftp connections, but those can't be solved, apparently.
Ciao,
Ollie
On 22/01/2020 23:03, Quentin Christensen wrote:
Hi Jarek,
I'm not familiar with the program, but if NVDA is working everywhere except for announcing these two buttons, it sounds like the developers of Total Commander has simply forgotten to label them. The easiest solution is to contact the developer of Total Commander and let them know and request they please label those two buttons.
Kind regards
Quentin.
On Wed, Jan 22, 2020 at 10:20 PM Jarek.Krcmar <Jarek.Krcmar@... <mailto:Jarek.Krcmar@...>> wrote:
Hello all,
After starting Total Commander I select the mass re-naming in Total
Commander, Nvda is mute by two buttons.
I would like to know, what can I do for Nvda should be speaking.
Nvda speaks everywhere, but by a two buttons it is mute.
-- Jarek
--
Quentin Christensen
Training and Support Manager
Web: www.nvaccess.org <http://www.nvaccess.org/>
Training: https://www.nvaccess.org/shop/
Certification: https://certification.nvaccess.org/
User group: https://nvda.groups.io/g/nvda
Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess <https://twitter.com/NVAccess> John
|
|
|
Oh... One more note: you can access ftp's with it, and it works great for that porpose.
toggle quoted message
Show quoted text
On 23/01/2020 12:20, john s wrote: Ollie, what does this program do and how much does it cost?
At 05:23 AM 1/23/2020, Mallard, wrote:
Hello Quentin,
There are other issues, especially in the forms to set up ftp connections, but those can't be solved, apparently.
Ciao,
Ollie
On 22/01/2020 23:03, Quentin Christensen wrote:
Hi Jarek,
I'm not familiar with the program, but if NVDA is working everywhere except for announcing these two buttons, it sounds like the developers of Total Commander has simply forgotten to label them. The easiest solution is to contact the developer of Total Commander and let them know and request they please label those two buttons.
Kind regards
Quentin.
On Wed, Jan 22, 2020 at 10:20 PM Jarek.Krcmar <Jarek.Krcmar@... <mailto:Jarek.Krcmar@...>> wrote:
Hello all,
After starting Total Commander I select the mass re-naming in Total
Commander, Nvda is mute by two buttons.
I would like to know, what can I do for Nvda should be speaking.
Nvda speaks everywhere, but by a two buttons it is mute.
-- Jarek
--
Quentin Christensen
Training and Support Manager
Web: www.nvaccess.org <http://www.nvaccess.org/>
Training: https://www.nvaccess.org/shop/
Certification: https://certification.nvaccess.org/
User group: https://nvda.groups.io/g/nvda
Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess <https://twitter.com/NVAccess> John
|
|
|
toggle quoted message
Show quoted text
-----Original Message----- From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Mallard Sent: Donnerstag, 23. Januar 2020 18:31 To: nvda@nvda.groups.io Subject: Re: [nvda] Nvda and Total Commander Oh... One more note: you can access ftp's with it, and it works great for that porpose. On 23/01/2020 12:20, john s wrote: Ollie, what does this program do and how much does it cost?
At 05:23 AM 1/23/2020, Mallard, wrote:
Hello Quentin,
There are other issues, especially in the forms to set up ftp
connections, but those can't be solved, apparently.
Ciao,
Ollie
On 22/01/2020 23:03, Quentin Christensen wrote:
Hi Jarek,
I'm not familiar with the program, but if NVDA is working everywhere
except for announcing these two buttons, it sounds like the
developers of Total Commander has simply forgotten to label them.Â
The easiest solution is to contact the developer of Total Commander
and let them know and request they please label those two buttons.
Kind regards
Quentin.
On Wed, Jan 22, 2020 at 10:20 PM Jarek.Krcmar <Jarek.Krcmar@...
<mailto:Jarek.Krcmar@...>> wrote:
Hello all,
After starting Total Commander I select the mass re-naming in Total
Commander, Nvda is mute by two buttons.
I would like to know, what can I do for Nvda should be speaking.
Nvda speaks everywhere, but by a two buttons it is mute.
-- Jarek
--
Quentin Christensen
Training and Support Manager
Web: www.nvaccess.org <http://www.nvaccess.org/>
Training: https://www.nvaccess.org/shop/
Certification: https://certification.nvaccess.org/
User group: https://nvda.groups.io/g/nvda
Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess <https://twitter.com/NVAccess> John
|
|
|
Thanks Ralf. I'll check it out.
Ciao,
Ollie
toggle quoted message
Show quoted text
On 23/01/2020 20:09, Ralf Kefferpuetz wrote: And I wrote an addon for it, see here:
https://github.com/Novalis7747/totalcmd-enhanced/raw/master/totalcmd-0.6.3.nvda-addon
cheers,
Ralf
-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Mallard
Sent: Donnerstag, 23. Januar 2020 18:31
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda and Total Commander
Oh... One more note: you can access ftp's with it, and it works great for that porpose.
On 23/01/2020 12:20, john s wrote:
Ollie, what does this program do and how much does it cost?
At 05:23 AM 1/23/2020, Mallard, wrote:
Hello Quentin,
There are other issues, especially in the forms to set up ftp
connections, but those can't be solved, apparently.
Ciao,
Ollie
On 22/01/2020 23:03, Quentin Christensen wrote:
Hi Jarek,
I'm not familiar with the program, but if NVDA is working everywhere
except for announcing these two buttons, it sounds like the
developers of Total Commander has simply forgotten to label them.Â
The easiest solution is to contact the developer of Total Commander
and let them know and request they please label those two buttons.
Kind regards
Quentin.
On Wed, Jan 22, 2020 at 10:20 PM Jarek.Krcmar <Jarek.Krcmar@...
<mailto:Jarek.Krcmar@...>> wrote:
Hello all,
After starting Total Commander I select the mass re-naming in Total
Commander, Nvda is mute by two buttons.
I would like to know, what can I do for Nvda should be speaking.
Nvda speaks everywhere, but by a two buttons it is mute.
-- Jarek
--
Quentin Christensen
Training and Support Manager
Web: www.nvaccess.org <http://www.nvaccess.org/>
Training: https://www.nvaccess.org/shop/
Certification: https://certification.nvaccess.org/
User group: https://nvda.groups.io/g/nvda
Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess <https://twitter.com/NVAccess> John
|
|
|
Ollie, thanks. At 12:30 PM 1/23/2020, Mallard, wrote: Hello,
It's a two-panel file manager.
The programme is shareware; you can keep it for 30 days without registering, but it continues to fully function even afterthat - actually forever.
I don't know how much it would cost now. I bought so many years ago...
In order to activate the proramme when you open it, if it isn't registered, you simply have to press one of teh numbers on the keyboard - 1, 2 or 3Â which is presented at random with each new launching ofthe programme.
You'll hear:
1 button
2 button
3 button
1 1
for example.
You'll have to type the number that doesn't say button after it, bu is repeated twice instead - in this example, 1 1 = type 1 on the keyboard...
After tat the programme will be fully functional.
It has loads of options, and a considerable number of plugins and extensions, but not many are accessible, so I don't use those.
The Android version is free.
hth, ciao,
Ollie
On 23/01/2020 12:20, john s wrote:
Ollie, what does this program do and how much does it cost?
At 05:23 AM 1/23/2020, Mallard, wrote:
Hello Quentin,
There are other issues, especially in the forms to set up ftp connections, but those can't be solved, apparently.
Ciao,
Ollie
On 22/01/2020 23:03, Quentin Christensen wrote:
Hi Jarek,
I'm not familiar with the program, but if NVDA is working everywhere except for announcing these two buttons, it sounds like the developers of Total Commander has simply forgotten to label them. The easiest solution is to contact the developer of Total Commander and let them know and request they please label those two buttons.
Kind regards
Quentin.
On Wed, Jan 22, 2020 at 10:20 PM Jarek.Krcmar <Jarek.Krcmar@... <mailto:Jarek.Krcmar@...>> wrote:
   Hello all,
   After starting Total Commander I select the mass re-naming in Total
   Commander, Nvda is mute by two buttons.
   I would like to know, what can I do for Nvda should be speaking.
   Nvda speaks everywhere, but by a two buttons it is mute.
   --    Jarek
--
Quentin Christensen
Training and Support Manager
Web: www.nvaccess.org <http://www.nvaccess.org/>
Training: https://www.nvaccess.org/shop/
Certification: https://certification.nvaccess.org/
User group: https://nvda.groups.io/g/nvda
Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess <https://twitter.com/NVAccess> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â John
John
|
|
|
