Hi listers:



Code Factory has updated their own link for the Eloquence/Vocalizer driver.
They just updated the file, but, left the filename the same. However, it is
definitely changed, since I’m using it right now. They haven’t yet done the
one branded for ATGuys, but, it doesn’t matter—their download also works
with the licensing system. Here’s the link:



https://www.codefactoryglobal.com/downloads/installers/codefactory-py3-1.0.nvda-addon



Hope this helps.



Sent from Mail for Windows

Hi listers:

Code Factory has updated their own link for the Eloquence/Vocalizer
driver.  They just updated the file, but, left the filename the same.
However, it is definitely changed, since I’m using it right now. They
haven’t yet done the one branded for ATGuys, but, it doesn’t
matter—their download also works with the licensing system.  Here’s the
link:

https://www.codefactoryglobal.com/downloads/installers/codefactory-py3-1.0.nvda-addon
<https://www.codefactoryglobal.com/downloads/installers/codefactory-py3-1.0.nvda-addon>

Hope this helps.

Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for Windows

El 24 may 2022, a la(s) 9:44 a.m., Joseph Norton <joseph.norton@...> escribió:



Hi listers:

 

Code Factory has updated their own link for the Eloquence/Vocalizer driver.  They just updated the file, but, left the filename the same.  However, it is definitely changed, since I’m using it right now. They haven’t yet done the one branded for ATGuys, but, it doesn’t matter—their download also works with the licensing system.  Here’s the link:

 

https://www.codefactoryglobal.com/downloads/installers/codefactory-py3-1.0.nvda-addon

 

Hope this helps.

 

Sent from Mail for Windows

 

Can you just install the update over your existing copy of the addon or

do you have to remove the old one?

On 5/24/2022 9:44 AM, Joseph Norton wrote:

> Hi listers:

> 

> Code Factory has updated their own link for the Eloquence/Vocalizer

> driver.  They just updated the file, but, left the filename the same.

> However, it is definitely changed, since I’m using it right now. They

> haven’t yet done the one branded for ATGuys, but, it doesn’t

> matter—their download also works with the licensing system.  Here’s the

> link:

> 

> https://www.codefactoryglobal.com/downloads/installers/codefactory-py3-1.0.nvda-addon

> <https://www.codefactoryglobal.com/downloads/installers/codefactory-py3-1.0.nvda-addon>

> 

> Hope this helps.

> 

> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for Windows

> 

>

Hi:



I did some testing and here is what I found out.



If you update NVDA, it will disable the add-on, which you are warned about.



When you install the new update to the add-on, it also removes any Vocalizer
voices installed. It also deletes the activation from the computer, so you
will need to enter your activation code again.



If you have not updated yet, but, aren’t sure where your code is, you may be
able to retrieve it from the About tab in the settings.



Press NVDA+N and go down to Code Factory, Press Enter twice to open up the
settings dialog. Go into the about tab and press tab until you hear “Enter
activation key”. Your key should be displayed and selected. If you press
CTRL+C on it, it will copy the key to the clipboard. You can then save it
to a text file or just keep it there. If you keep it on the clipboard, you
can then update both NVDA and the add-on. Once you have restarted NVDA with
the new version of the add-on installed, you can go into the Code Factory
menu selection, and re-activate with the key you previously copied to the
clipboard.



You will need to re-download any Vocalizer voices after the activation.



You should not loose any of your activations, since your computer ID string
will not change.



Hope this helps.

Sent from Mail for Windows



From: Don H
Sent: Tuesday, May 24, 2022 12:42 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] CodeFactory updated their download of the
Eloquence/Vocalizer driver



Can you just install the update over your existing copy of the addon or

do you have to remove the old one?



On 5/24/2022 9:44 AM, Joseph Norton wrote:

Hi listers:

Code Factory has updated their own link for the Eloquence/Vocalizer

driver. They just updated the file, but, left the filename the same.

However, it is definitely changed, since I’m using it right now. They

haven’t yet done the one branded for ATGuys, but, it doesn’t

matter—their download also works with the licensing system. Here’s the

link:

https://www.codefactoryglobal.com/downloads/installers/codefactory-py3-1.0.nvda-addon

<https://www.codefactoryglobal.com/downloads/installers/codefactory-py3-1.0.nvda-addon>

Hope this helps.

Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
Windows

Hi:

 

I did some testing and here is what I found out.

 

If you update NVDA, it will disable the add-on, which you are warned about.

 

When you install the new update to the add-on, it also removes any Vocalizer voices installed.  It also deletes the activation from the computer, so you will need to enter your activation code again.

 

If you have not updated yet, but, aren’t sure where your code is, you may be able to retrieve it from the About tab in the settings.

 

Press NVDA+N and go down to Code Factory, Press Enter twice to open up the settings dialog.  Go into the about tab and press tab until you hear “Enter activation key”.  Your key should be displayed and selected.  If you press CTRL+C on it, it will copy the key to the clipboard.  You can then save it to a text file or just keep it there.  If you keep it on the clipboard, you can then update both NVDA and the add-on.  Once you have restarted NVDA with the new version of the add-on installed, you can go into the Code Factory menu selection, and re-activate with the key you previously copied to the clipboard.

 

You will need to re-download any Vocalizer voices after the activation.

 

You should not loose any of your activations, since your computer ID string will not change.

 

Hope this helps.

Sent from Mail for Windows

 

From: Don H
Sent: Tuesday, May 24, 2022 12:42 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] CodeFactory updated their download of the Eloquence/Vocalizer driver

 

Can you just install the update over your existing copy of the addon or

do you have to remove the old one?

 

On 5/24/2022 9:44 AM, Joseph Norton wrote:

> Hi listers:

> 

> Code Factory has updated their own link for the Eloquence/Vocalizer

> driver.  They just updated the file, but, left the filename the same.

> However, it is definitely changed, since I’m using it right now. They

> haven’t yet done the one branded for ATGuys, but, it doesn’t

> matter—their download also works with the licensing system.  Here’s the

> link:

> 

> https://www.codefactoryglobal.com/downloads/installers/codefactory-py3-1.0.nvda-addon

> <https://www.codefactoryglobal.com/downloads/installers/codefactory-py3-1.0.nvda-addon>

> 

> Hope this helps.

> 

> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for Windows

> 

>

 

 

 

 

 

I don't know that's is a good idea to leave it on the notepad now, then
do the update. I'd save the code to a file somewhere, that you can
retrieve it from later. If left on notepad and not saved somewhere and
the no button is pressed when closing notepad to make the restart for
updating it is lost.

Dave


On 5/24/2022 3:14 PM, Joseph Norton wrote:

Hi:

I did some testing and here is what I found out.

If you update NVDA, it will disable the add-on, which you are warned
about.

When you install the new update to the add-on, it also removes any
Vocalizer voices installed. It also deletes the activation from the
computer, so you will need to enter your activation code again.

If you have not updated yet, but, aren’t sure where your code is, you
may be able to retrieve it from the About tab in the settings.

Press NVDA+N and go down to Code Factory, Press Enter twice to open up
the settings dialog. Go into the about tab and press tab until you
hear “Enter activation key”. Your key should be displayed and
selected. If you press CTRL+C on it, it will copy the key to the
clipboard. You can then save it to a text file or just keep it there.
If you keep it on the clipboard, you can then update both NVDA and the
add-on. Once you have restarted NVDA with the new version of the
add-on installed, you can go into the Code Factory menu selection, and
re-activate with the key you previously copied to the clipboard.

You will need to re-download any Vocalizer voices after the activation.

You should not loose any of your activations, since your computer ID
string will not change.

Hope this helps.

Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
Windows

*From: *Don H <mailto:lmddh50@...>
*Sent: *Tuesday, May 24, 2022 12:42 PM
*To: *nvda@nvda.groups.io
*Subject: *Re: [nvda] CodeFactory updated their download of the
Eloquence/Vocalizer driver

Can you just install the update over your existing copy of the addon or

do you have to remove the old one?

On 5/24/2022 9:44 AM, Joseph Norton wrote:

Hi listers:

Code Factory has updated their own link for the Eloquence/Vocalizer

driver. They just updated the file, but, left the filename the same.

However, it is definitely changed, since I’m using it right now. They

haven’t yet done the one branded for ATGuys, but, it doesn’t

matter—their download also works with the licensing system. Here’s the

link:

https://www.codefactoryglobal.com/downloads/installers/codefactory-py3-1.0.nvda-addon

<https://www.codefactoryglobal.com/downloads/installers/codefactory-py3-1.0.nvda-addon>

Hope this helps.

Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for

Windows

I don't know that's is a good idea to leave it on the notepad now,
then do the update. I'd save the code to a file somewhere, that you
can retrieve it from later. If left on notepad and not saved
somewhere and the no button is pressed when closing notepad to make
the restart for updating it is lost.

Dave


On 5/24/2022 3:14 PM, Joseph Norton wrote:

Hi:

I did some testing and here is what I found out.

If you update NVDA, it will disable the add-on, which you are warned
about.

When you install the new update to the add-on, it also removes any
Vocalizer voices installed. It also deletes the activation from the
computer, so you will need to enter your activation code again.

If you have not updated yet, but, aren’t sure where your code is, you
may be able to retrieve it from the About tab in the settings.

Press NVDA+N and go down to Code Factory, Press Enter twice to open
up the settings dialog. Go into the about tab and press tab until
you hear “Enter activation key”. Your key should be displayed and
selected. If you press CTRL+C on it, it will copy the key to the
clipboard. You can then save it to a text file or just keep it there.
If you keep it on the clipboard, you can then update both NVDA and
the add-on. Once you have restarted NVDA with the new version of the
add-on installed, you can go into the Code Factory menu selection,
and re-activate with the key you previously copied to the clipboard.

You will need to re-download any Vocalizer voices after the activation.

You should not loose any of your activations, since your computer ID
string will not change.

Hope this helps.

Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
Windows

*From: *Don H <mailto:lmddh50@...>
*Sent: *Tuesday, May 24, 2022 12:42 PM
*To: *nvda@nvda.groups.io
*Subject: *Re: [nvda] CodeFactory updated their download of the
Eloquence/Vocalizer driver

Can you just install the update over your existing copy of the addon
or

do you have to remove the old one?

On 5/24/2022 9:44 AM, Joseph Norton wrote:

Hi listers:

Code Factory has updated their own link for the Eloquence/Vocalizer

driver. They just updated the file, but, left the filename the same.

However, it is definitely changed, since I’m using it right now.
They

haven’t yet done the one branded for ATGuys, but, it doesn’t

matter—their download also works with the licensing system. Here’s
the

link:

https://www.codefactoryglobal.com/downloads/installers/codefactory-py
3-1.0.nvda-addon

<https://www.codefactoryglobal.com/downloads/installers/codefactory-p
y3-1.0.nvda-addon>

Hope this helps.

Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for

Windows

For me I got it from the AtGuys website under account, click view in your
order.

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Clarissa
Mitchell
Sent: Tuesday, May 24, 2022 3:04 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] CodeFactory updated their download of the
Eloquence/Vocalizer driver

Okay, I remembered that I had activated it on another computer when I was
living somewhere else and coming back for the holidays. I got my key from
the other computer and made sure to save it in a file on my flash drive. So
it's activated on my main computer now, and I will never lose my key. Now I
just have to send another email to AT Guys, as I had already contacted them
saying I lost my key. Now I have to tell them I found it!

On 5/24/22, Dave Grossoehme <dave@...> wrote:

I don't know that's is a good idea to leave it on the notepad now,
then do the update. I'd save the code to a file somewhere, that you
can retrieve it from later. If left on notepad and not saved
somewhere and the no button is pressed when closing notepad to make
the restart for updating it is lost.

Dave


On 5/24/2022 3:14 PM, Joseph Norton wrote:

Hi:

I did some testing and here is what I found out.

If you update NVDA, it will disable the add-on, which you are warned
about.

When you install the new update to the add-on, it also removes any
Vocalizer voices installed. It also deletes the activation from the
computer, so you will need to enter your activation code again.

If you have not updated yet, but, aren’t sure where your code is, you
may be able to retrieve it from the About tab in the settings.

Press NVDA+N and go down to Code Factory, Press Enter twice to open
up the settings dialog. Go into the about tab and press tab until
you hear “Enter activation key”. Your key should be displayed and
selected. If you press CTRL+C on it, it will copy the key to the
clipboard. You can then save it to a text file or just keep it there.
If you keep it on the clipboard, you can then update both NVDA and
the add-on. Once you have restarted NVDA with the new version of the
add-on installed, you can go into the Code Factory menu selection,
and re-activate with the key you previously copied to the clipboard.

You will need to re-download any Vocalizer voices after the activation.

You should not loose any of your activations, since your computer ID
string will not change.

Hope this helps.

Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
Windows

*From: *Don H <mailto:lmddh50@...>
*Sent: *Tuesday, May 24, 2022 12:42 PM
*To: *nvda@nvda.groups.io
*Subject: *Re: [nvda] CodeFactory updated their download of the
Eloquence/Vocalizer driver

Can you just install the update over your existing copy of the addon
or

do you have to remove the old one?

On 5/24/2022 9:44 AM, Joseph Norton wrote:

Hi listers:

Code Factory has updated their own link for the Eloquence/Vocalizer

driver. They just updated the file, but, left the filename the same.

However, it is definitely changed, since I’m using it right now.
They

haven’t yet done the one branded for ATGuys, but, it doesn’t

matter—their download also works with the licensing system. Here’s
the

link:

https://www.codefactoryglobal.com/downloads/installers/codefactory-py
3-1.0.nvda-addon

<https://www.codefactoryglobal.com/downloads/installers/codefactory-p
y3-1.0.nvda-addon>

Hope this helps.

Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for

Windows